Output DST-1R4P-P Optocoupler Isolation Module, 20KHZ Small Size Optocoupler Isolation Board, Good Performance for Signal Isolation Single Chip Microcomputer
Asin: B08P7KWPZN | Model: NITRIPaumwg9d76t | PartNumber: NITRIPaumwg9d76t | Ean: 9588071261861
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Power Module】Using High‑Quality Materials, Strong And Durable, Has A Long Service Life.
【Specification】This Product Is A 4 Channels Optocoupler Isolation Module, The Limit Conversion Frequency Is 20Khz.
【Spare Parts】Great Workmanship, Can Perfect Replacement For The Old One.
【Convenient To Use】Small Size, Easy To Carry And Store, Convenient To Use And With Good Performance.
Features
- Application Occasions Can be used for signal isolation, level conversion between single chip microcomputer, PLC and other
- Convenient to Use Small size, easy to carry and store, convenient to use and with good performance
- Power Module Using high quality materials, strong and durable, has a long service life
- Spare Parts Great workmanship, can perfect replacement for the old one
- Specification This product is a 4 channels optocoupler isolation module, the limit conversion frequency is 20KHZ
- See more on Amazon...
Brand: NITRIP | Manufacturer: NITRIP
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.07 pounds
See On Amazon Similar To Output DST1R4PP Optocoupler Isolation Module
#1
NOYITO PC817 4-Channel Optocoupler Isolation Board Voltage Converter Adapter Module 3.6-30V Driver Photoelectric Isolated Module
Asin: B07GMHLL2M | Model: NOPC8174C | PartNumber: NOPC8174C | Ean: 0667797752569 | UPC: 667797752569
It Can Realize 3.3V Or 5V To Control The Interface Of 3.6-30V Voltage . After The Control Terminal Is Turned On, The Controlled Terminal Will Also Be Turned On..
【8-Channel Optocoupler Isolation Board Asin : B09rgtbdkj 】 Noyito Pc817 4-Channel Optocoupler Isolation Board User Manual Https://1Drv.Ms/U/S!Alzqucoyzqhkgt98ibtg22r8w5eq?E=Vfkbrk.
Photoelectric Isolation Has Strong Anti-Interference Ability. It Can Drive High-Power Triodes, Mos Tubes And Other Applications That Require High-Voltage Driving, And Can Also Directly Drive Low-Power 24V Relays.If It Is A Pulse Signal, Please Note That The Limit Of 817 Is 4Khz Or Less. If The Control Signal Is Greater Than 4Khz, Please Do Not Use This Module, It Will Not Work Properly..
Drive Terminal Signal Voltage: 3.6-24V. Output Terminal Voltage Range: 3.6-30V (Output Current Depends On The Specific Situation But The Maximum Does Not Exceed 10Ma, The Total Power Is Constant, The Voltage And Current Are Inversely Proportional).
Features
- This module is used when it comes to the need for isolation control and voltage conversion.
- Drive terminal signal voltage: 3.6-24V. Output terminal voltage range: 3.6-30V (output current depends on the specific situation but the maximum does not exceed 10MA, the total power is constant, the voltage and current are inversely proportional)
- It can realize 3.3V or 5V to control the interface of 3.6-30V voltage . After the control terminal is turned on, the controlled terminal will also be turned on.
- Photoelectric isolation has strong anti-interference ability. It can drive high-power triodes, MOS tubes and other applications that require high-voltage driving, and can also directly drive low-power 24V relays.If it is a pulse signal, please note that the limit of 817 is 4KHZ or less. If the control signal is greater than 4KHZ, please do not use this module, it will not work properly.
- 8-Channel Optocoupler Isolation Board ASIN B09RGTBDKJ NOYITO PC817 4-Channel Optocoupler Isolation Board User Manual https://1drv.ms/u/s!AlzQUCOyZQhKgT98ibtG22R8W5eQ?e=VfKbrK
- See more on Amazon...
Brand: NOYITO | Manufacturer: NOYITO
Dimensions: 0.39 x 0.71 x 1.50 inches | Weight: 0.03 pounds
Warranty: Manufacturer's One-year After-sale Warranty
See On Amazon #2
Comimark 2Pcs Tlp281 4-Channel Opto-Isolator Ic Module for Expansion Board C4K2
Asin: B07YHZSZRM | Model: LY564 | PartNumber: LY564 | Ean: 0657835730482 | UPC: 657835730482
Hgnd Connection Is Control Of High Voltage Anode.
We Highly Appreciate All Customers Opinions To Improve The Selling, Also If Anything You Unsatisfied, Please Contact Us For Probable Best Solution..
Package Included: 2 X 4-Channel Module Expansion Board (If The Number Of Products Received Is Incorrect, Please Contact Us . We Will Refund Or Give You A Replacement).
Output: Hvcc: Connection Is Control Of High Voltage Anode,.
Features
- Output: OUT1 / OUT2 / OUT3 / OUT4
- Output: HVCC: Connection is control of high voltage anode,
- HGND connection is control of high voltage anode
- Package Included: 2 x 4-Channel Module Expansion Board (If the number of products received is incorrect, please contact us . we will refund or give you a replacement)
- We highly appreciate all customers opinions to improve the selling, also if anything you unsatisfied, please contact us for probable best solution.
- See more on Amazon...
Brand: Comimark | Manufacturer: Comimark
See On Amazon #3
5 PCS Optocoupler Isolation Board, Icstation DC 12V Optocoupler Isolation Module EL817 1 Channel Opto PNP NPN Signal Converter, Isolator High-Level Trigger 80KHz
Asin: B01L1OI1HC | Model: EL817 1CH Optocoupler Isolation Board | PartNumber: EL817 1CH Optocoupler Isolation Board
【Level Converter】Opto-Isolators Can Be Used As Level Converters (Npn-Pnp, Pnp-Npn), Signal Input To Mcu In Isolation, Or Mcu-Controlled Device Output In Isolation..
【Functional Application】Devices For Microprocessor Input/Output Switching, Dc/Ac Power Control, Communications Equipment Protection, And Power Supply Regulation..
【Control Transformer】Optocoupler Isolation Board Provide Isolation Between Low And High-Voltage Circuits When Used With Other Electronic Devices..
【Signal Voltage】Positive Phase Amplification With High-Level Trigger. Output Equals Input..
Features
- Relay Switch Module 5pcs 1-channel photocoupler isolator with stable performance, triggered by DC 12V and 1mA current.
- Signal Voltage Positive phase amplification with high-level trigger. Output equals input.
- Level Converter Opto-isolators can be used as level converters (NPN-PNP, PNP-NPN), signal input to MCU in isolation, or MCU-controlled device output in isolation.
- Control Transformer Optocoupler isolation board provide isolation between low and high-voltage circuits when used with other electronic devices.
- Functional Application Devices for microprocessor Input/Output switching, DC/AC power control, communications equipment protection, and power supply regulation.
- See more on Amazon...
Brand: IS | Manufacturer: Icstation
Dimensions: 0.55 x 1.10 x 0.59 inches | Weight: 0.02 pounds
See On Amazon #4
NOYITO 1-Channel PC817 Optocoupler Isolation Module Optoelectronic Isolator Signal Isolation and Anti-Interference 3-5V 12V 24V (Pack of 2) (3-5V)
Asin: B0B5373L4P
The Module Can Also Be Used For Current Amplification. For Example, When The Output Current Of The Microcontroller Is Too Small To Drive Certain Circuits, This Module Can Be Used For Amplification..
Output Signal Voltage: Wide Voltage, Suitable For Dc1.8 - 24V..
Input Signal Voltage: 3-5V / 12V / 24V (Optional)..
The Module Can Be Used For High-Voltage Detection. For Example, If The Output Signal Level Of A Sensor Is 12V, And The Voltage Of The Microcontroller Is 5V, This Module Can Be Used For Isolation Detection..
Features
- NOYITO 1-Channel PC817 Optocoupler Isolation module adopts 5.0 pitch screw terminals for easy wiring . The module can play the role of isolation when the output level of the single-chip microcomputer drives the inductive devices such as motors and motors, and protect part of the circuit of the single-chip microcomputer against interference
- The module can be used for high-voltage detection. For example, if the output signal level of a sensor is 12V, and the voltage of the microcontroller is 5V, this module can be used for isolation detection.
- The module can also be used for current amplification. For example, when the output current of the microcontroller is too small to drive certain circuits, this module can be used for amplification.
- Input signal voltage: 3-5V / 12V / 24V (optional).
- Output signal voltage: wide voltage, suitable for DC1.8 - 24V.
- See more on Amazon...
Brand: NOYITO | Manufacturer: NOYITO
Dimensions: 0.47 x 2.60 x 0.65 inches
Warranty: One Year
See On Amazon #5
Gikfun OPTOCOUPLER DIP-4 PC817C PC817 for Arduino DIY (Pack of 20pcs) AE1143
Asin: B01JG8EJVW | Model: LYSB01GYH74O2-ELECTRNCS | PartNumber: LYSB01GYH74O2-ELECTRNCS | Ean: 0728821641362, 0634894436395 | UPC: 634894436395, 728821641362
Pin Pitch: 2.54Mm.
Used Widely In Computer Terminals, System Appliances, Measuring Instruments, Registers, Copiers, Automatic Vending Machines Etc.
Optocoupler Output Type: Optical Transistor.
Number Of Pin: 4.
Features
- Gikfun Packing 20pcs OPTOCOUPLER DIP-4 PC817C PC817
- Number of Pin: 4
- Pin Pitch: 2.54mm
- Optocoupler Output Type: optical transistor
- Used widely in computer terminals, system appliances, measuring instruments, registers, copiers, automatic vending machines etc
- See more on Amazon...
Brand: Gikfun | Manufacturer: Esooho
Dimensions: 0.20 x 5.00 x 3.50 inches
See On Amazon #6
HiLetgo 3pcs TLP281 Optocoupler Isolation Board Optical Coupler Isolation Module 4 Channel Optical Coupler Isolation Module High/Low Level Expansion Board
Asin: B01MRR4K6Z
Connecting Digital Systems (Like A 5V Microcontroller) To A High-Voltage Or Noisy System.
A Normal Led Opto-Isolator Will Invert The Logic Of A Signal.
A Higher Voltage Than The Ttl Logic On The (3.3V Or 5V) Micro.
Pcb Size: 25Mm X 26Mm.
Features
- TLP281 4 Channel Optical Coupler Isolation Module
- PCB Size: 25mm x 26mm
- Connecting digital systems (like a 5V microcontroller) to a high-voltage or noisy system
- A higher voltage than the TTL logic on the (3.3V or 5V) micro
- A normal LED opto-isolator will invert the logic of a signal
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #7
DONGKER Optocoupler Isolation Board,DC 3.3V 5V PNP NPN 8-Channel Signal Converter Opto Voltage Isolation Module
Asin: B08LYQQ7X6 | Model: 1 | PartNumber: 1 | Ean: 0770264202464 | UPC: 770264202464
Npn / Pnp (Low/High Level) Signal Output..
Dc 1.8V-24V Load Voltage..
Support Dc 3.3V~5V Input..
8-Channel Input And Output..
Features
- Optocoupler isolation control.
- 8-Channel input and output.
- NPN / PNP (Low/High level) signal output.
- Support DC 3.3V~5V Input.
- DC 1.8V-24V load voltage.
- See more on Amazon...
Brand: DONGKER | Manufacturer: DONGKER
See On Amazon #8
3PCS PC817 4 Channel Optocoupler Isolation Board Voltage Converter 3.6-30V Driver Photoelectric Isolated Module
Asin: B0B15FTBPF | Model: 13490-1 | PartNumber: 13490-1 | Ean: 0701715532465 | UPC: 701715532465
4 Way 817 Optocoupler To Achieve The Control Signal And The Control Signal Isolation, You Can Directly Use The Microcontroller Or Other Devices Io Port To Achieve Voltage Isolation Control, You Can Achieve A Small Voltage Control, The Control Side Can Be An External Transistor Mos Tube Or Different Voltage Levels Of The Device Interface.
If It Is A Pulse Signal, Please Note That The Limit Of 817 Is Below 3Khz. If The Control Signal Is Greater Than 3Khz, Please Do Not Use This Module, It Will Not Work Properly..
Pc817 Module Jumper Cap Can Achieve Output Port Is High Potential Or Pull Down Output.
4-Way 817 Optocoupler Driving Port Signal Voltage:3.3-24V; Output Voltage Range: 3.6-30V(The Output Current Depends On The Specific Situation But Not Over 10Ma. When The Total Power Is Fixed, The Voltage And Current Are Inversely Proportional).
Features
- Onboard 4 channel 817 are independent: can achieve different voltage control at then same time
- 4-way 817 optocoupler driving port signal voltage:3.3-24V; Output voltage range: 3.6-30V(The output current depends on the specific situation but not over 10MA. When the total power is fixed, the voltage and current are inversely proportional)
- 4 way 817 optocoupler to achieve the control signal and the control signal isolation, you can directly use the microcontroller or other devices IO port to achieve voltage isolation control, you can achieve a small voltage control, the control side can be an external transistor MOS tube or different voltage levels Of the device interface
- PC817 module jumper cap can achieve output port is high potential or pull down output
- If it is a pulse signal, please note that the limit of 817 is below 3KHZ. If the control signal is greater than 3KHZ, please do not use this module, it will not work properly.
- See more on Amazon...
Brand: Shutao | Manufacturer: Shutao
See On Amazon #9
Alinan 4pcs 4CH Optocoupler PC817 4 Channel Isolation Board Voltage Converter Adapter Module 3.6-30V Driver Photoelectric Isolated Module
Asin: B09ZH6D7CQ | Model: Alinan | PartNumber: Alinan | Ean: 0701715514935 | UPC: 701715514935
★Photoelectric Isolation Has Strong Anti-Interference Ability. Can Drive Big Behindpower Triodes, Mos Tubes, Etc., Where High Voltage Driving Is Required, Can Also Directly Drive Low Power 24V Relays..
★Through The Jumper Cap Can Achieve Whether The Output Is High Potential Output Or Low Output.The 4Th And 817 On The Board Are Independent, Which Can Realize Simultaneous Control Of Different Voltages, Etc..
★If It Is A Pulse Signal, Please Note That The Limit Of 817 Is Below 4Khz. If The Control Signal Is Greater Than 4Khz, Please Do Not Use This Module, It Will Not Work Properly..
★Can Realize 3.3V Or 5V To Control The Interface Of 3.6-30V Voltage . After The Control Terminal Is Turned On, The Controlled Terminal Will Also Be Turned On..
Features
- Driving Port Signal Voltage: 3.6-24V; Output Port Voltage Port: 3.6-30V
- Can realize 3.3V or 5V to control the interface of 3.6-30V voltage . After the control terminal is turned on, the controlled terminal will also be turned on.
- Photoelectric isolation has strong anti-interference ability. Can drive big behindPower triodes, MOS tubes, etc., where high voltage driving is required, can also directly drive low power 24V relays.
- If it is a pulse signal, please note that the limit of 817 is below 4KHZ. If the control signal is greater than 4KHZ, please do not use this module, it will not work properly.
- Through the jumper cap can achieve whether the output is high potential output or low output.The 4th and 817 on the board are independent, which can realize simultaneous control of different voltages, etc.
- See more on Amazon...
Brand: Alinan | Manufacturer: Alinan
See On Amazon #10
DAOKAI 5PCS LM393 Comparator Speed Sensor Module Slot Type IR Optocoupler for Motor Speed Detection Also for MCU Arduino, with Dupont Wire
Asin: B09TJZV4XW | Model: WE-DA-026A | PartNumber: WE-DA-026A
🚗[Pin Definition]Vcc Is Connected To The Positive Pole Of The Power Supply, Gnd Is Connected To The Negative Pole Of The Power Supply, Do Ttl Switch Signal Output, Ao This Module Does Not Work.
🚗[Package Included]You Will Get 5 X Speed Measuring Sensor Lm393, 5 X Encoders, 1 X 20Pin Female To Male Dupont Wir.
🚗[Application]This Module Is Widely Used In Motor Speed Detection, Pulse Counting, Position Limit, Etc.
🚗[Size]Pcb Board Size: 33 X 14Mm / 1.26 X 0.55In (L X W), Slotted Width: 5Mm / 0.2In, Hole Size: 3Mm / 0.12In.
Features
- [Module]LM393 chip Speed Sensor Module,the use of imported groove coupler sensor, Working Voltage: DC 3.3 - 5V, the comparator output signal clean, good waveform, driving ability, than 15mA
- [Size]PCB Board Size: 33 x 14mm / 1.26 x 0.55in (L x W), Slotted Width: 5mm / 0.2in, Hole Size: 3mm / 0.12in
- [Pin definition]VCC is connected to the positive pole of the power supply, GND is connected to the negative pole of the power supply, DO TTL switch signal output, AO This module does not work
- [Application]This module is widely used in motor speed detection, pulse counting, position limit, etc
- [Package included]You will get 5 x Speed Measuring Sensor LM393, 5 x Encoders, 1 x 20pin Female to Male Dupont Wir
- See more on Amazon...
Brand: DAOKAI | Manufacturer: DAOKAI
See On Amazon #11
Ximimark 50Pcs PC817C Optocoupler IC Chip DIP-4 Transistor Output Optocoupler Optical Isolator
Asin: B07L75XH51 | Ean: 0657835637316 | UPC: 657835637316
Signal Transmission Between Circuits Of Different Potentials And Impedances..
Registers, Copiers, Automatic Vending Machines,Electric Home Appliances, Such As Fan Heaters, Etc..
System Appliances, Measuring Instruments..
High Isolation Voltage Between Input And Output ( Viso=5000V Rms ).
Features
- Current transfer ratio(CTR: MIN. 50% at I F = 5mA ,VCE=5V)
- High isolation voltage between input and output ( Viso=5000V rms )
- Signal transmission between circuits of different potentials and impedances.
- System appliances, measuring instruments.
- Registers, copiers, automatic vending machines,Electric home appliances, such as fan heaters, etc.
- See more on Amazon...
Brand: Ximimark | Manufacturer: Ximimark
See On Amazon #12
DONGKER Optical Isolator Module,12V Photoelectric Optoisolator PNP NPN Signal Converter PC817 Optocoupler Optoisolator
Asin: B07YJL3MQQ | Model: AAQ-WYY-9192 | PartNumber: AAQ-WYY-9192 | Ean: 0778836782307 | UPC: 778836782307
❤Isolator High-Level Trigger 80Khz, Scm Outpput Level Is Low,And Driven Module Voltage Is High.
❤Shop With Confidence: To Provide You With The Highest Quality Service, If You Have Any Question, Please Feel Free To Contact Us.We Will Provide After-Sales Service Until You Are Satisfied..
❤Can Be Applied To Inverter,Which Can Invert Output The Input Signal, High Voltage Testing, Current Amplification.
❤El817 Photoelectric Isolator, Scm Output Level Can Be Used To Isolating,Anti-Interference And Protect Scm Some Circuit When Driving Motor.
Features
- Optocoupler Isolation Board Voltage more than 3000V . Input Current:50MA(MAX). Operating Current:more than 1MA. Output Maximum Current:50MA (when input voltage is within the range of 15 20MA)
- EL817 photoelectric isolator, SCM output level can be used to isolating,anti-interference and protect SCM some circuit when driving motor
- Isolator High-Level Trigger 80KHz, SCM outpput level is low,and driven module voltage is high
- Can be applied to inverter,which can invert output the input signal, High Voltage Testing, Current Amplification
- SHOP WITH CONFIDENCE: To Provide You With the Highest Quality Service, If You Have Any Question, Please Feel Free to Contact Us.We Will Provide After-sales Service Until You Are Satisfied.
- See more on Amazon...
Brand: DONGKER
See On Amazon #13
QCCAN 4pcs PC817 4 Channel Optocoupler Isolation Board Voltage Converter Adapter Module Driver Photoelectric Isolated Module 3.6-30V (4pcs 4 Way Optocoupler)
Asin: B0B9XYYFZN | Model: QC19072 | PartNumber: QC19072 | Ean: 0701715530577 | UPC: 701715530577
Each Channel Has An Independent Power Indicator, Which Can Be Directly Driven By The Io Port Of The Mcu. The Input Terminal Is 5V High, And The 3-5Ma Current Can Be Driven..
Note: If It Is A Pulse Signal, Please Note That The Limit Of 817 Is Below 3Khz. If The Control Signal Is Greater Than 3Khz, Please Do Not Use This Module, It Will Not Work Properly..
Application:Mcu Output Level To Drive The Motor When The Inductive Device Such As The Motor Is Isolated, Anti-Interference Protects The Circuit Of The Mcu; The Voltage Of The Single Chip Is 5V. This Module Can Be Used For Isolation Detection Etc..
The Output Voltage Range:3.3-30V(Output Current Depends On The Specific Situation, But The Maximum Is Not 10Ma, The Total Power Is Certain, The Voltage And Current Are Inversely Proportional.
Features
- Onboard 4 channel 817 are independent: can achieve different voltage control at then same time; Through the jumper cap can achieve whether the output is high potential outputor low output.
- The output voltage range:3.3-30V(output current depends on the specific situation, but the maximum is not 10MA, the total power is certain, the voltage and current are inversely proportional
- Each channel has an independent power indicator, which can be directly driven by the IO port of the MCU. The input terminal is 5V high, and the 3-5MA current can be driven.
- Application:MCU output level to drive the motor when the inductive device such as the motor is isolated, anti-interference protects the circuit of the MCU; The voltage of the single chip is 5V. This module can be used for isolation detection etc.
- NOTE: If it is a pulse signal, please note that the limit of 817 is below 3KHZ. If the control signal is greater than 3KHZ, please do not use this module, it will not work properly.
- See more on Amazon...
Brand: QCCAN | Manufacturer: QCCAN
See On Amazon #14
Treedix Opto-Isolator Breakout Board with Two Photodiodes Built-in Comes with 2 Channel Coupler for Blocking Circuit
Asin: B09MHPRD5K | Ean: 0764784799177 | UPC: 764784799177
The Breakout Board Uses Ild213t Opto-Isolator And Discrete Transistors To Calibrate The Logic, With Two Channels. It Is Very Suitable For Use In Noisy Circuits Where Signal Lines Need Electrical Isolation..
Easy To Connect Logic Circuits, Fast Response Speed, High Transmission Efficiency: This Optoisolator Is Configured For Data Rates Up To 9600Bps. Compatible With Dual Wave, Vapor Phase And Ir Reflow Soldering.
Using This Board Can Allow The Microcontroller To Control The Servo System Or Other Motors. These Motors Use A Higher Voltage Than The Ttl Logic On The Micro (3.3V Or 5V), And May Affect Our System When The Motor Is Turned On And Off. Cause Electromagnetic Interference..
This Is Specially Designed For Optical Isolation, Which Helps To Connect Digital Systems To High-Voltage Or Noisy Systems.Good Isolation Performance, Complete Electrical Isolation Between Input And Output..
Features
- The board electrically isolates the controller from the high-power system by using an opto-isolator IC. The opto-isolator breakout IC has built-in two LEDs and two photodiodes, allowing the low-voltage side to control the high-voltage side.
- This is specially designed for optical isolation, which helps to connect digital systems to high-voltage or noisy systems.Good isolation performance, complete electrical isolation between input and output.
- The breakout board uses ILD213T opto-isolator and discrete transistors to calibrate the logic, with two channels. It is very suitable for use in noisy circuits where signal lines need electrical isolation.
- Using this board can allow the microcontroller to control the servo system or other motors. These motors use a higher voltage than the TTL logic on the micro (3.3V or 5V), and may affect our system when the motor is turned on and off. Cause electromagnetic interference.
- Easy to connect logic circuits, fast response speed, high transmission efficiency this optoisolator is configured for data rates up to 9600bps. Compatible with dual wave, vapor phase and IR reflow soldering
- See more on Amazon...
Brand: Treedix | Manufacturer: Treedix
Dimensions: 0.06 x 0.60 x 0.60 Inches
See On Amazon #15
DAOKI 5 PCS Slot Type IR Optocoupler Speed Sensor Module LM393 for Arduino
Asin: B01MRELRS1 | Model: BG-US-970033 | PartNumber: BG-US-970033 | Ean: 0695259117595 | UPC: 695259117595
5Mm Groove Width.
Application: Widely Used In Dynamo Speed Detecting, Pulse Counting, Etc.
Using Wide Voltage Lm393 Comparator.
Dimensions: Approx.3.2 X 1.4 X 0.7Cm.
Features
- Working voltage: 3.3V~5V
- Dimensions: Approx.3.2 x 1.4 x 0.7cm
- 5mm Groove width
- Using wide voltage LM393 comparator
- Application: Widely used in dynamo speed detecting, pulse counting, etc
- See more on Amazon...
Brand: DAOKI | Manufacturer: DAOKI
Weight: 0.33 pounds
See On Amazon #16
NOYITO Optocoupler isolation MOS FET 10A DC 2.7-27V High-Power Field Effect Tube Driver Module 0-20Khz PWM Switch Control Board Development Board Module
Asin: B07R4VCCPL | Ean: 0680613662323 | UPC: 680613662323
Pwm Frequency: 0~20Khz..
Https://1Drv.Ms/B/S!Alzqucoyzqhkgr_Thyca2hxes2nm?E=Hn13gn.
Please Check The Second Picture On The Left For The Product Wiring Diagram..
Noyito Optocoupler Isolation Mos Fet 10A Dc 2.7-27V High-Power Field Effect Driver Module User Manual.
Application: Can Input Pwm, Control Motor Speed, Lamp Brightness And So On..
Output Capacity: Dc 3.7V-27V, 10A Max..
Features
- Input signal: PWM signal between 3-20V.
- Output capacity: DC 3.7V-27V, 10A Max.
- PWM frequency: 0~20Khz.
- Application: Can input PWM, control motor speed, lamp brightness and so on.
- Please check the second picture on the left for the product wiring diagram.
- NOYITO Optocoupler Isolation MOS FET 10A DC 2.7-27V High-Power Field Effect Driver Module User Manual
- https://1drv.ms/b/s!AlzQUCOyZQhKgR_thYCa2hXes2nM?e=Hn13gN
- See more on Amazon...
Brand: NOYITO | Manufacturer: NOYITO
Dimensions: 0.63 x 1.46 x 0.91 inches | Weight: 0.03 pounds
Warranty: Manufacturer's One-year After-sale Warranty
See On Amazon #17
ACEIRMC 4pcs 4CH Optocoupler PC817 4 Channel Isolation Board Voltage Converter Adapter Module 3.6-30V Driver Photoelectric Isolated Module (4CH Optocoupler)
Asin: B0BM41248D | Ean: 0701715447202 | UPC: 701715447202
Through The Jumper Cap Can Achieve Whether The Output Is High Potential Output Or Low Output.The 4Th And 817 On The Board Are Independent, Which Can Realize Simultaneous Control Of Different Voltages, Etc..
Can Realize 3.3V Or 5V To Control The Interface Of 3.6-30V Voltage . After The Control Terminal Is Turned On, The Controlled Terminal Will Also Be Turned On..
If It Is A Pulse Signal, Please Note That The Limit Of 817 Is Below 4Khz. If The Control Signal Is Greater Than 4Khz, Please Do Not Use This Module, It Will Not Work Properly..
Photoelectric Isolation Has Strong Anti-Interference Ability. Can Drive Big Behindpower Triodes, Mos Tubes, Etc., Where High Voltage Driving Is Required, Can Also Directly Drive Low Power 24V Relays..
Features
- The PC817 Optocoupler Isolation Board used when it comes to the need for isolation control and voltage conversion.
- Photoelectric isolation has strong anti-interference ability. Can drive big behindPower triodes, MOS tubes, etc., where high voltage driving is required, can also directly drive low power 24V relays.
- Through the jumper cap can achieve whether the output is high potential output or low output.The 4th and 817 on the board are independent, which can realize simultaneous control of different voltages, etc.
- If it is a pulse signal, please note that the limit of 817 is below 4KHZ. If the control signal is greater than 4KHZ, please do not use this module, it will not work properly.
- Can realize 3.3V or 5V to control the interface of 3.6-30V voltage . After the control terminal is turned on, the controlled terminal will also be turned on.
- See more on Amazon...
Brand: ACEIRMC | Manufacturer: ACEIRMC
See On Amazon #18
NOYITO 4-Channel Optocoupler Photoelectric Isolator Module Level Voltage Converter Module PLC Signal Converter Module PNP NPN to PNP (24V to 24V)
Asin: B07TCXMZ33 | Ean: 0680613662804 | UPC: 680613662804
Pcb Size: 45X72mm. Module Size: 48X86x40mm (Lxwxh)..
Noyito 4-Channel Optocoupler Photoelectric Isolator Module User Manual Https://1Drv.Ms/U/S!Alzqucoyzqhkgq3dvpz6np9zl2rw?E=Oesws9.
Widely Used, It Can Be Used For Signal Isolation, Level Conversion Between Signals Such As Single Chip Microcomputer And Plc. Pnp,Npn Signal To Npn Signal, Signal Level Conversion And Other Uses..
The Power Supply Has Anti-Connection Protection. The Limit Conversion Frequency Is 20Khz..
Features
- NOYITO 4-Channel Optocoupler Photoelectric Isolator Module Level Voltage Converter Module with high quality optocoupler and LED patch indicator.
- The power supply has anti-connection protection. The limit conversion frequency is 20Khz.
- PCB size: 45x72mm. Module size: 48x86x40mm (LxWxH).
- Widely used, it can be used for signal isolation, level conversion between signals such as single chip microcomputer and PLC. PNP,NPN signal to NPN signal, signal level conversion and other uses.
- NOYITO 4-Channel Optocoupler Photoelectric Isolator Module User Manual https://1drv.ms/u/s!AlzQUCOyZQhKgQ3dvpz6np9ZL2Rw?e=oESws9
- See more on Amazon...
Brand: NOYITO | Manufacturer: NOYITO
Dimensions: 0.59 x 3.39 x 1.89 Inches
See On Amazon #19
SING F LTD 50PCS PC817 Optocoupler in-Line 2.54mm Pitch 4-pin DIP-4 Mounting Transistor Output Opticalcoupler for Computer Terminals Timers Osciallators Dual Opamps Quad Opamp
Asin: B09SYQX7C7 | Model: BO|158,BO-EMM158 | PartNumber: BO|158,BO-EMM158 | Ean: 4894669774855
Low Input: Low Input Bias Current, Low Input Offset Voltage And Offset Current. Common Mode Input Voltage Range, Including Ground..
Package Includes: 50Pcs Pc817c 2.54Mm Pitch 4-Pin Dip-4 Transistor Output Optocoupler..
Durable Material: The Chip Is Made Of Metal Oxide Semiconductor Material, Which Has Good Thermal Stability And Long Service Life..
Application: Pc817 Photocoupler Is Widely Used In Computer Terminals, Timers, Osciallators, Dual Opamps, Quad Opamps, Comperators, Audio Amplifiers, Echo Processors, Current Mode Controllers, Darlington Arrays, Voltage Charge Pump,Etc..
Features
- Feature: Integrated circuits have the advantages of small size, light weight, small solder joints, long life, high reliability, and good performance.
- Application: PC817 photocoupler is widely used in computer terminals, timers, osciallators, dual opamps, quad opamps, comperators, audio amplifiers, echo processors, current mode controllers, darlington arrays, voltage charge pump,etc.
- Low input: Low input bias current, low input offset voltage and offset current. Common mode input voltage range, including ground.
- Durable material: The chip is made of metal oxide semiconductor material, which has good thermal stability and long service life.
- Package includes: 50pcs PC817C 2.54mm pitch 4-pin DIP-4 transistor output optocoupler.
- See more on Amazon...
Brand: SING F LTD | Manufacturer: SING F LTD
See On Amazon
Looking For Something Else?
Search