ANMBEST 5PCS 2 Channel 5V Relay Module with Optocoupler High or Low Level Trigger Expansion Board for Raspberry Pi Arduino
Asin: B08PPDCP4V | Model: ANMBEST_MD314-319 | PartNumber: ANMBEST_MD314-319 | Ean: 7903265708908
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Reliable: Fault-Tolerant Design, Even If The Control Line Breaks, The Relay Will Not Move; With Optical Coupling Isolation, Triggering More Reliable, More Stable..
High/Low Level Trigger Can Be Selected By Jumper. Very Versatile, You Can Reverse The Input Logic With The Jumper..
Easy To Install: Equipped With Screwed Terminal Plate And Fixed Bolt Holes(Diameter: 3.1 Mm) On Both Sides For Easy Installation..
Equipped With High-Current Relay, Maximum Load: Ac250v 10A, 15A 125Vac, Dc30v 10A; Trigger Current Of Opto-Isolator: 5Ma..
Features
- It is 2 Channel Isolated 5V 10A Relay Module, each relay can individually switch on/off by an opto-isolated digital input, Standard interface can be directly connected with microcontrollers and be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, DSP, etc., very convenient.
- Equipped with high-current relay, maximum load: AC250V 10A, 15A 125VAC, DC30V 10A; Trigger current of opto-isolator: 5mA.
- RELIABLE: Fault-tolerant design, even if the control line breaks, the relay will not move; With optical coupling isolation, triggering more reliable, more stable.
- EASY to INSTALL: Equipped with screwed terminal plate and fixed bolt holes(diameter: 3.1 mm) on both sides for easy installation.
- High/Low level trigger can be selected by jumper. Very versatile, you can reverse the input logic with the jumper.
- See more on Amazon...
Brand: ANMBEST | Manufacturer: ANMBEST
See On Amazon Similar To ANMBEST 5PCS 2 Channel 5V
#1
CenryKay DC 5V 2 Channel Relay Module with Isolated Optocoupler High and Low Level H/L Level Trigger Module Triggered by DC 5V(6PCS)
Asin: B08G1JSS7G | Model: JDQ | PartNumber: JDQ | Ean: 0744306039264 | UPC: 744306039264
The Module Can Be Set To Trigger High Or Low Level By Jumper, Fault Tolerant Design, Even If The Control Line Is Broken, The Relay Will Not Move.
It Have 4 Fixing Bolt Holes, Hole 3.1Mm, Spacing 44.5Mm*35.5Mm.
Power Indicator (Green), Relay Status Indicator (Red), User-Friendly Interface Design, All Interfaces Can Be Directly Connected Through The Terminal Block, Very Convenient.
Its Smd Optocoupler Isolation, Strong Driving Capability, Stable Performance; Trigger Current 5Ma,Module Operating Voltage Is 5V..
Features
- The module uses genuine quality relay, normally open interfaces , Maximum load: AC 250V/10A, DC 30V/10A.
- Its SMD optocoupler isolation, strong driving capability, stable performance; trigger current 5mA Module operating voltage is 5V.
- The module can be set to trigger high or low level by jumper, fault tolerant design, even if the control line is broken, the relay will not move
- Power indicator (green), relay status indicator (red), user-friendly interface design, all interfaces can be directly connected through the terminal block, very convenient
- It have 4 fixing bolt holes, hole 3.1mm, spacing 44.5mm*35.5mm
- See more on Amazon...
Brand: CenryKay | Manufacturer: CenryKay
See On Amazon #2
DEVMO 8 Channel DC 5V Relay Module Board, (2PACK) Electrical Equipments 8-Ch Optocoupler Compatible with PIC AVR DSP ARM MCU PLC Smart Home Control Switch
Asin: B08TMN8KN6 | Model: OTHER | PartNumber: OTHER
With Power Indicator,8-Way Road Has A Status Indicator. With A Relay Coil To Absorb The Diode Protection..
The 8 Channels Are Optically Isolated, Safe, Reliable, Anti-Interference. Widely Used For All Mcu Control, Industrial Sector, Plc Control, Smart Home Control..
Standard Interface That Can Be Controlled Directly By Microcontroller (8051, Avr, Pic, Dsp, Arm, Arm, Msp430, Ttl Logic)..
Each Relay Has Normally Open And Normally Closed Contact. Can Be Selected By Jumper Relay And Ttl Or Ground..
Features
- 5V 8-Channel Relay interface board, each one needs 15-20mA Driver Current; Equiped with high-current relay, AC250V 10A ; DC30V 10A.
- Each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground.
- With power indicator,8-way road has a status indicator. With a relay coil to absorb the diode protection.
- Standard interface that can be controlled directly by microcontroller (8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
- The 8 channels are optically isolated, safe, reliable, anti-interference. Widely used for all MCU control, industrial sector, PLC control, smart home control.
- See more on Amazon...
Brand: DEVMO | Manufacturer: DEVMO
See On Amazon
Looking For Something Else?
Search