Snapmaker CNC Bits (5 Bits)
Asin: B08PVD84B3 | Model: 22004 | PartNumber: 22004 | Ean: 6971573442044
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Sharp Cutting Reasonable Matched With High Strength Of Cutter.
Application For Wood, Mdf, Hdf, Solid Wood, Epoxy Board, Pvc, Plastic.
Made Of Alloy Steels/Hardened Steels, Durable And Practical To Use.
Chatter Resistant Design For Superior Surface Finishes.
Features
- High strength and hardness, durable in use
- Chatter resistant design for superior surface finishes
- Sharp cutting reasonable matched with high strength of cutter
- Made of alloy steels/hardened steels, durable and practical to use
- Application for wood, MDF, HDF, solid wood, epoxy board, PVC, plastic
- See more on Amazon...
Brand: Snapmaker | Manufacturer: Shenzhen Snapmaker Technologies Co., Ltd.
See On Amazon Similar To Snapmaker CNC Bits 5 Bits
#1
Genmitsu 40pcs End Mills CNC Router Bits, 1/8" Shank CNC Cutter Milling Carving Bit Set Including 2-Flute Flat Nose & Ball Nose, Nano Blue Coat & Titanium Coat, MC40A
Asin: B08CD99PWL | Model: MBS-001 | PartNumber: MBS-001 | Ean: 4897093844385
Two End Mill Sets -- Shank Diameter: 3.175Mm, Cutting Diameter: 0.8 - 3.0Mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0Mm), Cutting Length: 17Mm, Overall Length: 38Mm, With Nano Blue And Titanium Coating..
Wide Compatibility: The Mc40a End Mills Are Compatible With Most Desktop Cnc Machines, Such As The Genmitsu 3018 Series, As Well As Other Industrial Cnc Machines. Just Make Sure You Select The Correct-Sized Collet For Your Device.
Applicable Materials: Widely Used In Various Materials Including Plastics, Aluminum, Circuit Board, Wood, As Well As Other Precision Parts Processing..
2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175Mm, Cutting Diameter: 3.175Mm, Cutting Length: 17Mm, Overall Length: 38Mm..
Features
- High Quality: The Genmitsu end mills are made of ultra-fine 0.2 m tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating /Titanium Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
- 2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm.
- Two End Mill Sets -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium coating.
- Applicable Materials: Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing.
- Wide Compatibility: The MC40A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
Dimensions: 0.04 x 1.50 x 3.18 inches
See On Amazon #2
Dura-Gold - Premium - Variety Pack (40,60,80,120,220,320,400,600,800,1000) - 3" Gold Hook & Loop Sanding Discs for DA Sanders - Box of 50 Sandpaper Finishing Discs for Automotive and Woodworking
Asin: B07JG8LXBN | Ean: 0848849001174 | UPC: 848849001174
This Variety Packs A Range Of Extra-Fine To Extra Coarse Sandpaper Discs, Making Them Ideal For Sanding On All Types Of Surfaces. Use Them For Fine To Aggressive Sanding On Automotive Paint, Primers, Body Fillers, And Putties Before Painting Or For Removing Scratches On Wood And Paint..
Dura-Gold Offers A Complete Vast Product Line Of Professional, High-Quality Sandpaper Types That Provide Exceptional Sanding Performance, So You Can Get The Job Done Fast, Saving You Time And Money!.
Our Sandpaper Discs Are Suitable For Use In Auto Body And Paint Shops, Woodworking Wood Furniture Making, Metalworking Metal Sanding, Crafting, Household, Drywall, Industrial, Fiberglass, Plastics, Or Any Other Surface That Needs Sanding..
Superior Quality Sanding Discs Made With Super Coated Aluminum Oxide Corundum That's Fused With Zirconia Alumina. It Delivers A Fast, Exceptionally Long-Lasting Sharp Cut With A Consistent Scratch Pattern. It Has Maximum Resistance To Clogging And Loading, Increasing Your Productivity And Reducing Material Consumption..
Features
- Variety Pack Box of 50 Dura-Gold Premium 3" Sanding Discs with a Hook & Loop Backing plus a 3" Drill Backing Plate with Soft Interface Pad. Pack includes 5 sheets each of 10 different sanding grits: 40, 60, 80, 120, 220, 320, 400, 600, 800, and 1000 Grit. The hook & loop backing enables them to be quickly and securely attached to a sanders hook & loop backing plate or a baking plate attachment on a drill.
- Superior quality sanding discs made with super coated aluminum oxide corundum that's fused with zirconia alumina. It delivers a fast, exceptionally long-lasting sharp cut with a consistent scratch pattern. It has maximum resistance to clogging and loading, increasing your productivity and reducing material consumption.
- This variety packs a range of extra-fine to extra coarse sandpaper discs, making them ideal for sanding on all types of surfaces. Use them for fine to aggressive sanding on automotive paint, primers, body fillers, and putties before painting or for removing scratches on wood and paint.
- Our sandpaper discs are suitable for use in auto body and paint shops, woodworking wood furniture making, metalworking metal sanding, crafting, household, drywall, industrial, fiberglass, plastics, or any other surface that needs sanding.
- Dura-Gold offers a complete vast product line of professional, high-quality sandpaper types that provide exceptional sanding performance, so you can get the job done fast, saving you time and money!
- See more on Amazon...
Brand: Dura-Gold | Manufacturer: Dura-Gold
See On Amazon #3
Genmitsu 30pcs PCB Drill Bits Set, 0.1mm-3.0mm, 1/8" Shank Spiral Flute CNC Router Bits for Print Circuit Board Jewelry CNC Engraving, PD30A
Asin: B08M5PLF48 | Model: 101-61S-PD30A | PartNumber: 101-61S-PD30A | Ean: 4897093845375
Advantage: With Spiral Flute Cutting Edge, These Pcb Drill Bits Can Reduce Cutting Force And Prevent The Drill From Broken And Improve Accuracy. They Work Quickly And Cleanly, With No Glitches Or Scrap Left..
30-Piece Combo Set: There Are 3 Sets Of Drill Bits (Set A: 0.1Mm-1.0Mm; Set B: 1.1Mm-2.0Mm; Set C: 2.1Mm-3.0Mm), Each Of 10 Pieces, And Each Set Has A Protective Box. It's Easy To Store And Carry..
Application: Suitable For Amber Beeswax, Printed Circuit Boards, 3D Printer Nozzle Cleaning, Plexiglass, Bakelite, Cnc Engraving, Jewelry, Plastic, And Other Precise Drilling. To Learn More About How To Choose The Right Bits To Meet Your Needs, Please Find The Comparison Chart (Cnc Bits Buying Guide) At The Product Guides And Documents Section Below..
Various Sizes: 1/8'' Shank; Bits Diameter: 0.1Mm, 0.2Mm, 0.3Mm, 0.4Mm, 0.5Mm, 0.6Mm, 0.7Mm, 0.8Mm, 0.9Mm, 1.0Mm, 1.1Mm, 1.2Mm, 1.3Mm, 1.4Mm, 1.5M, 1.6Mm, 1.7Mm, 1.8Mm, 1.9Mm, 2.0Mm, 2.1Mm, 2.2Mm, 2.3Mm, 2.4Mm, 2.5Mm, 2.6Mm, 2.7Mm, 2.8Mm, 2.9Mm, 3.0Mm. This Set Contains 30 Different Size Drill Bits Diameter, Each Size Having1 Pcs..
Features
- High Quality: The PCB drill bits set are made of high-quality tungsten carbide steel alloy, which is high wear resistance, high hardness, anti-impairment. Seismic design on the blade edge enables it to stay stable during engraving.
- Various Sizes: 1/8'' shank; bits diameter: 0.1mm, 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, 1.1mm, 1.2mm, 1.3mm, 1.4mm, 1.5m, 1.6mm, 1.7mm, 1.8mm, 1.9mm, 2.0mm, 2.1mm, 2.2mm, 2.3mm, 2.4mm, 2.5mm, 2.6mm, 2.7mm, 2.8mm, 2.9mm, 3.0mm. This Set contains 30 different size drill bits diameter, each size having1 pcs.
- Advantage: With spiral flute cutting edge, these PCB drill bits can reduce cutting force and prevent the drill from broken and improve accuracy. They work quickly and cleanly, with no glitches or scrap left.
- Application: Suitable for amber beeswax, printed circuit boards, 3D printer nozzle cleaning, plexiglass, bakelite, CNC engraving, jewelry, plastic, and other precise drilling. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below.
- 30-piece Combo Set: There are 3 sets of drill bits (Set A: 0.1mm-1.0mm; Set B: 1.1mm-2.0mm; Set C: 2.1mm-3.0mm), each of 10 pieces, and each set has a protective box. It's easy to store and carry.
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
See On Amazon #4
HQMaster CNC Router Bits 1/8" Shank CNC Bit End Mill Flat Nose Carbide Endmill Two Flute Spiral Upcut Milling Cutter Tool Set for Wood PVC MDF Hardwood 10Pcs (3.175 mm)
Asin: B010NI39WO | Ean: 0602815418874, 0785479493262, 0723434395534, 7535001526752 | UPC: 723434395534, 785479493262, 602815418874
High Efficiency: These Bits Own Sharp Edge Which Is Able For Fast Engraving That Makes High Efficiency, Durable, High Precision And Not Easy To Break. It Is Smokeless And Burr-Free While Processing.
Package Contents: 10Pcs Solid Carbide Spiral Upcut Bits Assorted In Storage Case.
Perfect Cutting: The Design Of Flutes, Larger Spiral Chip Space Of Cnc Router Bit Makes Non-Stick Crumbs, Smooth Cutting And Fast Chip-Removal.
Dimensions: Shank Dia=1/8" (3.175Mm). Cutting Edge Diameter=1/8" (3.175Mm). Cutting Edge Length/Flute Length=17Mm. Overall Length=38.5Mm.
Features
- RANGE OF PROCESSING: For carving/cutting/engraving/milling/slotting/sculpturing in materials like MDF, ABS, PVC, acrylic, nylon, resin, plastics, density board, wood, plywood, hardwood etc. Ideal for three-dimensional sculpture, surface machining, 3D relief sculpturing, etc
- DIMENSIONS: Shank Dia=1/8 (3.175mm). Cutting edge diameter=1/8 (3.175mm). Cutting edge length/flute length=17mm. Overall length=38.5mm
- HIGH EFFICIENCY: These bits own sharp edge which is able for fast engraving that makes high efficiency, durable, high precision and not easy to break. It is smokeless and burr-free while processing
- PERFECT CUTTING: The design of flutes, larger spiral chip space of CNC Router Bit makes non-stick crumbs, smooth cutting and fast chip-removal
- PACKAGE CONTENTS: 10pcs solid carbide spiral upcut bits assorted in storage case
- See more on Amazon...
Brand: HQMaster | Manufacturer: HQMaster
See On Amazon #5
10 pcs 4-Flute End Mill Bits, AFUNTA 0.08" - 0.47" HSS CNC Straight Shank Drill Bits Cutter Tool Set for Wood Aluminum Steel Titanium
Asin: B07DQL66VF | Model: AF-4-flute_end_mill_10 | PartNumber: AF-4-flute_end_mill_10 | Ean: 0783710282415 | UPC: 783710282415
U-Shaped Groove Design, Large Front Angle Effectively Reduces Cutting Resistance, Sharp And Durable, Convenient For Chip Removal, Further Improve Machining Efficiency..
10 Different Kinds Of Size End Mills To Meet Your Need, 2Mm/0.08In,3Mm/0.12In, 4Mm/0.16In, 5Mm/0.2In, 6Mm/0.24In,7Mm/0.27In, 8Mm/0.31In, 9Mm/0.35In,10Mm/0.39In, 12Mm/0.47In.
Material: High Speed Steel, High Hardness, Good Wear Resistance And Durability..
High Processing Efficiency: The Edge Of End Mill Bits Is Hard And Sharp With Tiain Coating, Process The Heat Treatment Materials With High Speed, Reduce Changing Times And Improve The Production Efficiency..
Features
- APPLICATION: Suitable for side milling, end milling, finish machining in carbon steel, alloy steel, die steel, tool steel, cast iron, and titanium.
- HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP with TIAIN coating, process the heat treatment materials with high speed, reduce changing times and improve the production efficiency.
- U-SHAPED GROOVE DESIGN, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency.
- MATERIAL: high speed steel, high hardness, good wear resistance and durability.
- 10 DIFFERENT KINDS OF SIZE end mills to meet your need, 2mm/0.08in,3mm/0.12in, 4mm/0.16in, 5mm/0.2in, 6mm/0.24in,7mm/0.27in, 8mm/0.31in, 9mm/0.35in,10mm/0.39in, 12mm/0.47in
- See more on Amazon...
Brand: AFUNTA | Manufacturer: AFUNTA
Weight: 0.04 pounds
See On Amazon #6
SainSmart Genmitsu 10Pcs Nano Blue Coat End Mill CNC Router Bits, 0.8-3mm, 1/8" Shank
Asin: B07P7LGQJ6 | Ean: 4897093841353
➤Material: Using Ultra-Fine Grained Carbide Material, With Good Milling And Cutting Performance..
➤Genmitsu Cnc Bits Selection Guide: To Learn More About How To Choose The Right Bits To Meet Your Needs, Please Find The Comparison Chart (Cnc Bits Buying Guide) At The Product Guides And Documents Section Below..
➤Application: Pcb, Smt, Cnc, Mold, Plastic Fiber, Carbon Fiber, Hard Wood, Printed Circuit Board, And Other Precision Parts Processing..
: ➤Advantage: With Sufficient Flexural Strength And Wear Resistance, Which Ensure High Work Efficiency. Sharp Cutting Edge, Milling, Hole And Plate Edge, Clean Surface, Neat, No Glitches..
Features
- Cutting Edge Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.4/3.0mm), 10Pcs.
- : Advantage: With sufficient flexural strength and wear resistance, which ensure high work efficiency. Sharp cutting edge, milling, hole and plate edge, clean surface, neat, no glitches.
- Material: Using ultra-fine grained carbide material, with good milling and cutting performance.
- Application: PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, and other precision parts processing.
- Genmitsu CNC Bits Selection Guide: To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below.
- See more on Amazon...
Brand: SainSmart | Manufacturer: Genmitsu
Weight: 0.00 pounds
See On Amazon #7
Genmitsu 50pcs Tungsten Carbide End Mill Router Bits, 1/8'' Shank CNC Bit Set Including 2-Flute Straight Bit, Flat Nose & Ball Nose End Mill, PCB Drill & V-Groove Engraving Bits, Nano Blue Coat, MC50A
Asin: B09XMTKRL5 | Ean: 0816550025697 | UPC: 816550025697
Rich Sizes For Choose: 2-Flute Flat Nose & Ball Nose End Mills, 2-Flute Straight Router Bits, And Nano Blue Coating End Mills -- Cutting Diameter: (1-3.175Mm). Pcb Drill Bits -- Cutting Diameter: (1.1-2.0Mm)..
Wide Compatibility: The Mc50a End Mills Are Compatible With Most Desktop Cnc Machines, Such As The Genmitsu 3018 Series, Proverxl 4030, 3020-Pro Max, As Well As Other Industrial Cnc Machines. To Learn More About How To Choose The Right Bits To Meet Your Needs, Please Find The Comparison Chart (Cnc Bits Buying Guide) At The Product Guides And Documents Section Below..
Applicable Materials: Suitable For Such As Mdf, Pvc, Pcb, Acrylic, Wood, Solid Wood, Nylon, Resin, Plywood, Carbon Fiber, Amber Beeswax, Etc. Widely Used For 3D Relief Sculpting/2D Lettering/Cutting/Grooving/Slotting/Drilling/Hollowing/Positioning/Roughing/Milling..
Mixed Router Bit Set: 6 Kinds Of Bits In This Router Set, Which Include 10Pcs 2-Flute Flat Nose End Mills, 10Pcs 2-Flute Ball Nose End Mills, 10Pcs Nano Blue Coating End Mills, 10Pcs Pcb Drill Bits, 5Pcs V-Groove Engraving Bits, 5Pcs 2-Flute Straight Router Bits..
Features
- High Quality: Made of Tungsten Carbide Steel Alloy, which is high wear resistance and anti-impairment. Moreover, its Nano Blue Coating / Titanium Coating with high hardness and heat resistance provides longevity and produces cutting results of the highest quality.
- Mixed Router Bit Set: 6 kinds of bits in this router set, which include 10pcs 2-Flute Flat Nose End Mills, 10pcs 2-Flute Ball Nose End Mills, 10pcs Nano Blue Coating End Mills, 10pcs PCB Drill Bits, 5pcs V-Groove Engraving Bits, 5pcs 2-Flute Straight Router Bits.
- Rich Sizes for Choose: 2-Flute Flat Nose & Ball Nose End Mills, 2-Flute Straight Router Bits, and Nano Blue Coating End Mills -- Cutting Diameter: (1-3.175mm). PCB Drill Bits -- Cutting Diameter: (1.1-2.0mm).
- Applicable Materials: Suitable for such as MDF, PVC, PCB, Acrylic, wood, solid wood, Nylon, Resin, plywood, carbon fiber, amber beeswax, etc. Widely used for 3D relief sculpting/2D lettering/cutting/grooving/slotting/drilling/hollowing/positioning/roughing/milling.
- Wide Compatibility: The MC50A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, PROVerXL 4030, 3020-PRO MAX, as well as other industrial CNC machines. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below.
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
See On Amazon #8
Genmitsu CNC Wood Carving Router Bits Set, 1/4'' Shank, 4 PCS, 15 Detail Carving Liner+ 20 Profile bit+ 60 & 90 V Groove, WC04A
Asin: B095PL4H2V | Model: WC04A | PartNumber: WC04A | Ean: 4897093846402
Shank Diameter: 1/4''(6.35Mm), Cutting Diameter: 0.2Mm, Overall Length: 50Mm..
Wide Compatibility: Genmitsu Wc04a Wood Carving Router Bits Set Are Compatible With Most Desktop Cnc Machines, Such As The Genmitsu 3018 Series, As Well As Other Industrial Cnc Machines. Just Make Sure You Select The Correct-Sized Collet For Your Device..
Applicable Materials: Suitable For Mdf, Pvc, Acrylic, Wood, Solid Wood, Plywood, Organic Board, Etc. Highly Recommended For Wood Carving. Widely Used For Cutting/ Engraving/ Carving/ Grooving/ Slotting/ Drilling/ Hollowing/ Positioning/ Roughing / Milling..
Efficient Cuts: This Wood Carving Set Comes With 4 Pcs, 1/4” Shank Router Bits. 1Pcs 20° Profile Bit For Etching And Outlining; 1Pcs 15° Carving Liner For Fine Lines And Details; 60° & 90° V Groove Bits For Multiple Background Depths..
Features
- High Quality: Made of Premium Tungsten Carbide Steel Alloy. That's great for milling and cutting performance, ensuring that our bits stay sharp and provide nice clean cuts. The Nano Blue Coating with high hardness and heat resistance is durable and not easy to break.
- Efficient Cuts: This wood carving set comes with 4 PCS, 1/4 shank router bits. 1PCS 20 profile bit for etching and outlining; 1PCS 15 carving liner for fine lines and details; 60 & 90 V groove bits for multiple background depths.
- Shank diameter: 1/4''(6.35mm), cutting diameter: 0.2mm, overall length: 50mm.
- Applicable Materials: Suitable for MDF, PVC, Acrylic, wood, solid wood, plywood, organic board, etc. Highly recommended for wood carving. Widely used for cutting/ engraving/ carving/ grooving/ slotting/ drilling/ hollowing/ positioning/ roughing / milling.
- Wide Compatibility: Genmitsu WC04A Wood Carving Router Bits Set are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
See On Amazon #9
HQMaster Up & Down Cut Bit 1/8" Shank Compression Bit Spiral CNC Router Bits End Mill Tungsten Carbide Milling Cutter Set 5 Pack
Asin: B0BFW9GTPD | Model: HQ-60081 | PartNumber: HQ-60081
Clean Cut & Excellent Edge-Grinding: Compression Bit Is The Combination Of Both Upcut And Downcut Spirals. The Bottom Of The Material Will Be Pulled Upwards While The Top Of The Material Is Pushed Downwards Thus Eliminating The Risk Of Damaging The Laminated Surfaces, Leaving A Sharp, Clean Edge On Both Sides Of Your Workpiece. Non-Stick Crumbs, Smokeless, And Silent During Processing, Smooth Cutting, And Fast Chip Removal..
Package Includes: 5Pcs Up & Down Cut Bit.
Widely Use: Compression Cnc Router Bit Specially Designed For Mortising Grooving And Dado In Plastic, Plywood, Oak, Mdf, And Any Hardwood Working With Machines Cnc Machines. Work For Table-Mounted And Small Or Handheld Cnc Routers..
Durable & Long-Lasting Tool Life: High-Quality Solid Carbide Router Bits With Nano Blue Coat Feature With High Hardness, Heat Resistance, And Long-Lasting Cutting-Edge Performance Ensure High Work Efficiency..
Features
- UP and DOWN SPIRAL ROUTER BIT: 1/8" shank, 1/8" cutting diameter, 7/8"=22mm cutting length, 1-31/32"=50mm total length.
- DURABLE & LONG-LASTING TOOL LIFE: high-quality solid carbide router bits with nano blue coat feature with high hardness, heat resistance, and long-lasting cutting-edge performance ensure high work efficiency.
- CLEAN CUT & EXCELLENT EDGE-GRINDING: Compression bit is the combination of both upcut and downcut spirals. The bottom of the material will be pulled upwards while the top of the material is pushed downwards thus eliminating the risk of damaging the laminated surfaces, leaving a sharp, clean edge on both sides of your workpiece. Non-stick crumbs, smokeless, and silent during processing, smooth cutting, and fast chip removal.
- WIDELY USE: Compression CNC router bit specially designed for mortising grooving and dado in plastic, plywood, oak, MDF, and any hardwood working with machines CNC machines. Work for table-mounted and Small or handheld CNC routers.
- Package Includes: 5pcs Up & Down Cut Bit
- See more on Amazon...
Brand: HQMaster | Manufacturer: HQMaster
See On Amazon #10
SainSmart Genmitsu 10Pcs Nano Blue Coat Flat Nose End Mill CNC Router Bits, 1/8" Shank Spiral Upcut 2 Flute End Mill Set (3.175 x 17 x 38mm)
Asin: B07PBDJ9MG | Ean: 4897093841377
Cutting Edge Diameter (Ced): 3.175Mm (1/8") Approx. Sharp Cutting Edge, Milling, Hole And Plate Edge, Clean Surface, Neat, No Glitches..
Application: Perfect For 3D Relief Sculpturing, Cutting, Engraving, Slotting, Milling, Etc. Compatible With Most Desktop Cnc Machines, Such As The Genmitsu 3018 Series, As Well As Other Industrial Cnc Machines. To Learn More About How To Choose The Right Bits To Meet Your Needs, Please Find The Comparison Chart (Cnc Bits Buying Guide) At The Product Guides And Documents Section Below..
Suitable Material: Suitable For Mdf, Pvc, Acrylic, Wood, Solid Wood, Chipboard, Plywood, Organic Board, Core Board, Etc. Widely Used For Cutting/ Engraving/ Carving/ Grooving/ Slotting/ Drilling/ Hollowing/ Positioning/ Roughing / Milling..
Efficient Cuts: The 2-Flute Straight Router Bits Have A Mirror Polish And Large Chip Space Which Produces Smooth Cutting And Fast Chip-Removal..
Features
- High Quality: Nano Blue Coating for extended tool life and performance. Perfect for Roughing operations, slots and more.
- Efficient Cuts: The 2-Flute Straight Router Bits have a mirror polish and large chip space which produces smooth cutting and fast chip-removal.
- Cutting Edge Diameter (CED): 3.175mm (1/8) approx. Sharp cutting edge, milling, hole and plate edge, clean surface, neat, no glitches.
- Suitable Material: Suitable for MDF, PVC, Acrylic, wood, solid wood, chipboard, plywood, organic board, core board, etc. Widely used for cutting/ engraving/ carving/ grooving/ slotting/ drilling/ hollowing/ positioning/ roughing / milling.
- Application: Perfect for 3D relief sculpturing, cutting, engraving, slotting, milling, etc. Compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below.
- See more on Amazon...
Brand: SainSmart | Manufacturer: Genmitsu
See On Amazon #11
LAKIX 1/8" Shank End Mills CNC Router Bits, 40pcs, CNC Cutter Milling Carving Bit Set Including 2-Flute Flat Nose & Ball Nose End Mill, Nano Blue Coat & Titanium Coat CNC Bits,
Asin: B0CC5CMKPP
➤The Coat End Mill: Shank Diameter: 3.175Mmm(1/8Inch), Cutting Diameter: 0.8 ~ 3.0Mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0Mm), Cutting Length: 17Mm, Overall Length: 38Mm, With Nano Blue And Titanium Yellow Coating..
➤Applicable Materials And Uses:These Engraving Bit Can Be Used In A Wide Range Of Materials Including Solid Wood, Wood Paneling, Bakelite, Carbon Fiber, Pcb Boards, And Plastics, Etc. And The Bits Measure 3.178Mm (1/8Inch) And Are Compatible With Most Benchtop Cnc Machines And Engraving Machines Such As The 3018 Series As Well As Other Industrial Cnc Machines..
➤Excellent Performance: The Milling Router Bits As A Whole Uses Tungsten Steel For High-Precision Processing, Smooth Chip Removal, With High Precision, Durability, Not Easy To Wear, Long Service Life And So On, They Will Be A Nice Carving Tool，Greatly Improving Your Engraving Work Efficiency..
➤The 2-Flute Spiral Flat Nose & Ball Nose End Mills: Shank Diameter: 3.175Mm(1/8Inch), Cutting Diameter: 3.175Mm, Cutting Length: 17Mm, Overall Length: 38Mm.(Note: The Ball Nose End Mills's Cutting Diameter Is 2Mm).
Features
- What you will get 1 set 2-Flute Flat Nose Sprial Bit(3.175x17x38mm), 1 set 2-Flute Ball Nose Sprial Bit(3.175x2x17x38mm), 1 set Titanium Coat End Mill(0.8-3.0mm), 1 set Nano Blue Coat End Mill 0.8-3.0mm totally 40pcs CNC Router Bits
- The 2-Flute Spiral Flat Nose & Ball Nose End Mills: Shank Diameter: 3.175mm(1/8inch), Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm.(Note: The Ball Nose End Mills's cutting diameter is 2mm)
- The Coat End Mill: Shank Diameter: 3.175mmm(1/8inch), Cutting Diameter: 0.8 ~ 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium yellow coating.
- Excellent Performance: The milling router bits as a whole uses tungsten steel for high-precision processing, smooth chip removal, with high precision, durability, not easy to wear, long service life and so on, they will be a nice carving Tool greatly improving your engraving work efficiency.
- Applicable materials and uses:These engraving Bit can be used in a wide range of materials including solid wood, wood paneling, bakelite, carbon fiber, PCB boards, and plastics, etc. And the bits measure 3.178mm (1/8inch) and are compatible with most benchtop CNC machines and engraving machines such as the 3018 series as well as other industrial CNC machines.
- See more on Amazon...
Brand: LAKIX | Manufacturer: LAKIX
Dimensions: 0.12 x 1.50 x 0.12 Inches
See On Amazon #12
HUHAO 5PCS CNC Router Bits 20 Degree 1/8 Shank 2 Flutes 0.1mm Tip Engraving V Bits CNC Wood Carving Bit Straight Engraving V Groove Bit Engraving Tool Bits for Wood, Plywood, MDF, Stainless Steel
Asin: B07PTNXSL2 | Ean: 8011735406922
【Application】Cnc Wood Router For Cnc,Engraving Machine Woodworking, Carving Soft And Hard Wood, Plywood, Mdf, Stainless Steel, Titanium Alloy Etc.
Cnc Engraving Bits Works Well With Spring Loaded Engraving Tools, Cnc Milling Machines, End Mill Holders And Etc..
Huhao 0.1Mm Engraving 20 Degree Perfect Choice For Carving And Engraving Details. Mainly Used For The Engraving And Marking Of Wood, Mdf, Aluminum, Acrylic..
【Material】Huhao V Groove 3.175Mm End Mill Is Made Of Hard Carbide.With Sufficient Flexural Strength And Wear Resistance, Which Ensure High Work Efficiency. Sharp Cutting Edge, Milling, Hole And Plate Edge, Clean Surface, Neat, No Glitches..
Features
- Size CNC Router Bit 20 degree engraving router bits, CNC router bit 1/8 inch shank, 2 Flute straight Bit, CNC machine cutting for Woodworking
- Material HUHAO v groove 3.175mm end mill is made of hard carbide.With sufficient flexural strength and wear resistance, which ensure high work efficiency. Sharp cutting edge, milling, hole and plate edge, clean surface, neat, no glitches.
- Application cnc wood router For CNC,Engraving machine woodworking, Carving soft and hard wood, plywood, MDF, stainless steel, titanium alloy etc
- HUHAO 0.1mm engraving 20 degree Perfect choice for carving and engraving details. Mainly used for the engraving and marking of wood, MDF, aluminum, acrylic.
- CNC engraving bits works well with spring loaded engraving tools, CNC milling machines, end mill holders and etc.
- See more on Amazon...
Brand: HUHAO | Manufacturer: HUHAO
See On Amazon #13
End Mill Sets, 10 Pieces Titanium Coat Carbide CNC Router Burrs End Milling Engraving Bits Drilling Hole Tool for PCB Circuit Board Plastic Fiber Wood Copper 0.8~3.175mm 1/8" Shank
Asin: B085S734SJ | Model: DK-010 | PartNumber: DK-010
Titanium Coat Carbide Hard Steel: With Sufficient Flexural Strength And Wear Resistance, Ensuring High Work Efficiency..
Highly Precision: Sharp Cutting Edge, Milling, Hole And Plate Edge, Clean Surface, Neat, No Glitches..
High Quality Material: Using High Quality Grained Carbide Material, Providing Good Milling And Cutting Performance..
Wide Compatibility: Works With Pcb, Smt, Cnc, Mold, Plastic Fiber, Carbon Fiber, Hard Wood, Printed Circuit Board, And Other Precision Parts Processing..
Features
- Cutting edge diameter (CED): 0.8-3.175mm (10Pcs, 0.8mm, 1mm, 1.2mm, 1.5mm, 1.6mm, 1.8mm, 2mm, 2.4mm, 3mm, 3.175mm); Cutting edge length (CEL): 6mm; Total length: 38mm; Shank diameter (SHK): 3.175mm
- Wide Compatibility: Works with PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, and other precision parts processing.
- Titanium Coat Carbide Hard Steel: With sufficient flexural strength and wear resistance, ensuring high work efficiency.
- High Quality Material: Using high quality grained carbide material, providing good milling and cutting performance.
- Highly precision: Sharp cutting edge, milling, hole and plate edge, clean surface, neat, no glitches.
- See more on Amazon...
Brand: DKIBBITH | Manufacturer: DKIBBITH
Weight: 0.08 Grams
See On Amazon #14
40pcs End Mills CNC Router Bits, 1/8 inch(3.175mm) Shank CNC Milling Carving Bit Set Including 2-Flute Flat & Ball Nose Spiral Bits, Nano Blue Coat & Titanium Coat End Mill, Suitable for ER 11 Collet
Asin: B0C6PQXZ6R | Model: SKCM40 | PartNumber: SKCM40
【Dimensions】Cnc Router Bits Cutter: Length: 38Mm, Shank Diameter: 3.175Mm (1/8"). Flat & Ball End Nose Spiral Bit: Cutting Diameter: 3.175Mm, Cutting Length: 17Mm. Nano Blue And Titanium-Coated: Cutting Diameter: 0.8/1/1.2/1.4/1.6/1.8/2.0/2.2/2.4/3.0Mm. Plastic Case (54 X 51 X 9Mm) For Better Protection.
【Wide Application】Widely Used In Various Materials Such As Plastics, Aluminum, Mdf, Acrylic, And Wood, And More. They Are Compatible With Most Desktop Cnc Machines, Such As The Cnc 3018 Series, 4540, 3020 Plus As Well As Other Cnc Machines.
【High Efficiency】Our Tungsten Steel End Mills Are Sharp, Ensuring Fast Cutting, Low Noise, And Easy Debris Removal. They Save Time On Tool Changes, Significantly Improving Work Efficiency.
【Perfect Combination】Get A Set Of 40 Milling Bits, Including 10 Flat-End And 10 Ball-End Nose Spiral Bits, As Well As 10 Nano Blue-Coated And 10 Titanium-Coated End Mill. These Versatile Sizes Cover Most Mechanical Manufacturing Needs.
Features
- High Quality Our tungsten steel end mills are made for high durability, hardness, wear resistance, and breakage prevention. They have excellent heat resistance and a smooth surface for precision without burrs
- Perfect Combination Get a set of 40 milling bits, including 10 flat-end and 10 ball-end nose spiral bits, as well as 10 nano blue-coated and 10 titanium-coated end mill. These versatile sizes cover most mechanical manufacturing needs
- Dimensions CNC router bits cutter: Length: 38mm, Shank diameter: 3.175mm (1/8). Flat & ball end nose spiral bit: Cutting diameter: 3.175mm, Cutting length: 17mm. Nano blue and titanium-coated: Cutting diameter: 0.8/1/1.2/1.4/1.6/1.8/2.0/2.2/2.4/3.0mm. Plastic case (54 x 51 x 9mm) for better protection
- High Efficiency Our tungsten steel end mills are sharp, ensuring fast cutting, low noise, and easy debris removal. They save time on tool changes, significantly improving work efficiency
- Wide Application Widely used in various materials such as plastics, aluminum, mdf, acrylic, and wood, and more. They are compatible with most desktop CNC machines, such as the CNC 3018 Series, 4540, 3020 PLUS as well as other CNC machines
- See more on Amazon...
Brand: iklestar | Manufacturer: iklestar
See On Amazon #15
YONICO Solid Carbide Single Flute Upcut End Mill Router Bits CNC Spiral O Flute 1/8-Inch Diameter 1/4-Inch Shank 31012-SC
Asin: B07KKKG1M3 | Model: 31012-SC | PartNumber: 31012-SC | Ean: 0765573831276 | UPC: 765573831276
Premium C3 Micro-Grain Solid Tungsten Carbide For A High-Performance Industrial Quality Tool.
Polished To A Mirror Finish From A Solid Carbide Rod For Precision & Accuracy.
For Use On Cnc, Table Mount And Handheld Routers.
For Cnc Milling And Routing On Aluminum And Plastics Where A Clean Bottom Surface Edge Of Material Is Required.
Features
- This O-flute bit has a cutting diameter of 1/8", cutting height of 1/2", overall length 2" and 1/4" shank.
- For CNC milling and routing on aluminum and plastics where a clean bottom surface edge of material is required
- Premium C3 micro-grain solid tungsten carbide for a high-performance industrial quality tool
- For use on CNC, table mount and handheld routers
- Polished to a mirror finish from a solid carbide rod for precision & accuracy
- See more on Amazon...
Brand: Yonico | Manufacturer: Yonico
Dimensions: 0.10 x 2.00 x 0.25 Inches | Weight: 0.04 pounds
See On Amazon #16
SpeTool 5 Pcs CNC Router Bit Sets Cabide Bit 1/4 Inch Shank Up Down Cut V Groove for Woodwork Beginner Engraving Slot
Asin: B096NC7Q93 | Model: WD-3 | PartNumber: WD-3
Spiral Router Bit : Smoothly Down Cut Groove And Slots, Mortises, Cycles And Dados, Leave Clean Edge And Top Surface, Better Effect Than Straight Bits.
Packge Includes: 5 Pcs Router Bit : 2 Pcs V-Groove Bit +3 Pcs Spiral Router Bit..
V-Groove Bits. Making Signs Or Adding Ecorative Accents To Furniture And Plaques. This "V" Grooving Bits Are Designed To Cut Deep Or Shallow 60 / 90 Degree "V" Grooves.
1/4 Inch Shank. The Bit Set With 1/4" Shank Can Fit Any Brand Plunge Router With 1/4” Collect.
Features
- Specifications: 60,90 degree V-GEOOVE BITs; 1/8" dia. 1/2 Blade length UP CUT 1/4" dia. 1" Blade length extra long UP CUT 1/4" dia. 1-1/4" Blade length DOWN CUT Router Bits.
- 1/4 INCH SHANK. The bit set with 1/4 shank can fit any brand plunge router with 1/4 collect
- SPIRAL ROUTER BIT : smoothly down cut groove and slots, Mortises, Cycles and dados, leave clean edge and top surface, better effect than straight bits
- V-GROOVE BITs. Making signs or adding ecorative accents to furniture and plaques. This V grooving bits are designed to cut deep or shallow 60 / 90 degree V grooves
- Packge Includes: 5 pcs router bit : 2 pcs v-groove bit +3 pcs spiral router bit.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #17
Amana Tool - 204005 Carbide Tipped Brad Pt. Boring Bit R/H 5mm Dia x 70mm Long x 10mm Sh
Asin: B000P4QJT2 | Model: 204005 | PartNumber: 204005 | Ean: 0738685140055 | UPC: 738685140055
(D) Shank: 10Mm.
Rotation: Right Hand.
Overall Length (L): 70Mm.
(D) Diameter: 5Mm.
Features
- (B) Cutting height: 35mm
- (D) diameter: 5mm
- (D) shank: 10mm
- Overall length (L): 70mm
- Rotation: right hand
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
See On Amazon #18
Amana Tool - 201005 Carbide Tipped Brad Pt. Boring Bit R/H 5mm Dia x 57mm Long x 10mm Sh
Asin: B000KGIR7M | Model: 201005 | PartNumber: 201005 | Ean: 0738685201053 | UPC: 738685201053
(D) Shank: 10Mm.
Rotation: Right Hand.
Overall Length (L): 57Mm.
(D) Diameter: 5Mm.
Features
- (B) Cutting height: 27mm
- (D) diameter: 5mm
- (D) shank: 10mm
- Overall length (L): 57mm
- Rotation: right hand
- See more on Amazon...
Brand: Amana Tool | Manufacturer: Amana Tool
Dimensions: 0.50 x 2.50 x 0.50 Inches
See On Amazon #19
Snapmaker A350T 3D Printer, 3 in 1 3D Printer with 3D Printing Laser Engraving CNC Carving,FDM 3D Printer Auto Bed Leveling with Resume Printing,5inch Touchscreen,Large Printing Size 12.6X13.8X13in
Asin: B09G36C1Y2 | Ean: 6971573448152
★【Modular Design】- A350t 3D Printer Innovatively Adopts The Can (Controller Area Network) Bus Technology, Realizing Modularity And Guaranteeing Efficient And Stable Data Transmission. Benefit From The Modular Design, You Can Assemble, Disassemble And Change Any Components And Function Easily And Quickly..
★【Custom 3-In-1 Software】- Snapmaker Luban With 5-Inch Touchscreen And Intuitive User Interface Supports Power Loss Recovery, Fully Open Source Code, Multi-Object Processing, Customized Profiles, Various Bulit-In Cases And Multiple Language. It Is Compatible With Windows, Mac Os And Linux System, Just Start Job Via Wi-Fi, Usb Flash Drive And Usb Cable(Included)..
★【Our Service】- Snapmaker Provides All Of Our Customers With One Year Warranty For All Quality Issues, And We Also Provide Four Free Services To Help You Get Started Quickly: Professional Technical Support, Quick Start Guide, User Manual, And International Interactive Community..
★【Rock Solid Machine】- With The Repeatability Of 0.005Mm In High Precision And All-Metal Body, A350t Makes Possible High-Resolution Of 3D Printing, Engraving, Cutting, And Carving. It Is Not Only Premium And Built To Last, But Also Consistently Delivers High Performance And Safety..
★【Larger Printing Size】- Snapmaker A350t Offers Large Build Volume Of 12.6X13.8X13in, So That You Can Use A350t To Print Models That 95% Of Other Printers Can Not, And You Can Print One-Piece Large-Scale Prototypes With No Need To Split The File Into Smaller Ones. It Shortens The Time It Takes From An Idea To Reality..
Features
- 3-in-1 Innovation - Snapmaker 2.0 A350T modular 3-in-1 3D Printer unlocks your full creative potential, from 3D printing to laser engraving, cutting, and CNC carving. Smarter, faster, larger, and more powerful than ever before, it is a new generation of 3-in-1 3D printer. Get only one machine,comes with everything you need.
- Larger Printing Size - Snapmaker A350T offers large build volume of 12.6X13.8X13in, so that you can use A350T to print models that 95% of other printers can not, and you can print one-piece large-scale prototypes with no need to split the file into smaller ones. It shortens the time it takes from an idea to reality.
- Modular Design - A350T 3D printer innovatively adopts the CAN (Controller Area Network) bus technology, realizing modularity and guaranteeing efficient and stable data transmission. Benefit from the modular design, you can assemble, disassemble and change any components and function easily and quickly.
- Rock Solid Machine - With the repeatability of 0.005mm in high precision and all-metal body, A350T makes possible high-resolution of 3D printing, engraving, cutting, and carving. It is not only premium and built to last, but also consistently delivers high performance and safety.
- Custom 3-in-1 Software - Snapmaker Luban with 5-inch touchscreen and intuitive user interface supports Power Loss Recovery, fully open source code, multi-object processing, customized profiles, various bulit-in cases and multiple language. It is compatible with Windows, Mac OS and Linux system, just start job via Wi-Fi, USB Flash Drive and USB Cable(included).
- Our Service - Snapmaker provides all of our customers with one year warranty for all quality issues, and we also provide Four Free Services to Help You Get Started Quickly: Professional Technical Support, Quick Start Guide, User Manual, and International Interactive Community.
- See more on Amazon...
Brand: Snapmaker | Manufacturer: Snapmaker
Dimensions: 12.60 x 13.78 x 12.99 inches | Weight: 61.73 Pounds
Warranty: 1 Year
See On Amazon
Looking For Something Else?
Search