MakerFocus 10pcs 186 50 Lithium Battery Charging Module TP4056 Charging Module 1A with Battery Protection 186 50 BMS and 2A 5V Charge Discharge Module Charging Boost Mobile Power Protection PCB Board
Asin: B08QD3W677 | Model: SGn37i fggw | PartNumber: SGn37i fggw
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.2A 5V Charge Discharge Integrated Module - Mcu Users, If You Accept A Small Load Key Can Be Connected To The Microcontroller About 20S To Provide A Low Level Allows The Module To Continue Working. Trigger Mode: Low Level Trigger (Ground) . 4 In 1 Charging / Discharging / Lithium Battery Protection / Battery Level Indicator Module. Lithium Battery Protection Function: Over-Current, Overvoltage, Over-Temperature, Short Circuit Protection..
If The Load Is Less Than 50Ma, The Output Will Be Automatically Turned Off After 30 Seconds; If The Load Is Greater Than 50Ma, The Output Will Be Automatically Turned On. Allow Discharge While Charging. (Note: At This Time Output Voltage 4.7 / 5V)..
2A 5V Charge Discharge Integrated Module - In Discharge Mode (The Charging Mode Key Function Is Invalid), Trigger The Key Port Once To Open The Output; Continuously Trigger The Key Port Twice To Close The Output. The First Time The Load Is Connected, The Output Is Automatically Turned On..
Tp4056 Charging Module - Input Voltage: 5V; Battery Over-Discharge Protection Voltage: 2.5V; Batteryovercurrent Protection Current: 3A; Connect The Battery To The B+ B-, Inserted Into The Usb Female Mobilephone Charger, The Red Light Is Being Charged, The Green Light To Full. The Charge Should Disconnect The Load Out Terminal On The Positive And Negative Can Not Be Wrong, Please According To Specifications, Otherwise It Will Damage Directly..
Features
- TP4056 Charging Module - Inputs with MICRO USB female, can be directly input to do with the phone charger rechargeable lithium battery, And still retains the input voltage wiring pads, can be very convenient DIY. Charging cut-off voltage: 4.2V 1%; Maximum charge current: 1000mA.
- TP4056 Charging Module - Input voltage: 5V; Battery over-discharge protection voltage: 2.5V; Batteryovercurrent protection current: 3A; Connect the battery to the B+ B-, inserted into the USB female mobilephone charger, the red light is being charged, the green light to full. The charge should disconnect the load OUT terminal on the positive and negative can not be wrong, please according to specifications, otherwise it will damage directly.
- 2A 5V Charge Discharge Integrated Module - MCU users, if you accept a small load KEY can be connected to the microcontroller about 20s to provide a low level allows the module to continue working. Trigger mode: low level trigger (ground) . 4 in 1 Charging / Discharging / Lithium Battery Protection / Battery Level Indicator Module. Lithium battery protection function: over-current, overvoltage, over-temperature, short circuit protection.
- 2A 5V Charge Discharge Integrated Module - In discharge mode (The charging mode KEY function is invalid), trigger the KEY port once to open the output; continuously trigger the KEY port twice to close the output. The first time the load is connected, the output is automatically turned on.
- If the load is less than 50MA, the output will be automatically turned off after 30 seconds; if the load is greater than 50MA, the output will be automatically turned on. Allow discharge while charging. (Note: At this time output voltage 4.7 / 5V).
- See more on Amazon...
Brand: MakerFocus | Manufacturer: MakerFocus
Dimensions: 2.00 x 2.70 x 0.90 inches
Warranty: No Warranty
See On Amazon Similar To MakerFocus 10pcs 186 50 Lithium
#1
MakerFocus 10pcs TP4056 Charging Module with Battery Protection 186 50 BMS 5V Micro USB 1A 186 50 Lithium Battery Charging Board
Asin: B071RG4YWM | Model: 8541549166 | PartNumber: 8541549166 | Ean: 0190033766643 | UPC: 190033766643
Input Voltage: 5V; Battery Over-Discharge Protection Voltage: 2.5V; Batteryovercurrent Protection Current: 3A; Connect The Battery To The B + B-, Inserted Into The Usb Female Mobilephone Charger, The Red Light Is Being Charged, The Green Light To Full.
We Have A Strong After-Sales Service Team: As Long As You Have Any Questions About The Product, We Will Resolve Your Issue Immediately If Received Your Email, Your Satisfactory Purchase Experience Is Our Greatest Hope! How To Email Us? Plz Click “Makerfocus” And Click “Ask A Question” To Email Us! Looking Forward To Your Consultation.
The Charge Should Disconnect The Load Out Terminal On The Positive And Negative Can Not Be Wrong, Please According To Specifications, Otherwise It Will Damage Directly.
Charging Cut-Off Voltage: 4.2V ± 1%; Maximum Charge Current: 1000Ma.
Features
- The input has a MICRO USB female connector, which can be directly input as a mobile phone charger to recharge the lithium battery, and the input voltage wiring pad is also reserved, which can be very convenient for DIY
- Charging cut-off voltage: 4.2V 1%; Maximum charge current: 1000mA
- Input voltage: 5V; Battery over-discharge protection voltage: 2.5V; Batteryovercurrent protection current: 3A; Connect the battery to the B + B-, inserted into the USB female mobilephone charger, the red light is being charged, the green light to full
- The charge should disconnect the load OUT terminal on the positive and negative can not be wrong, please according to specifications, otherwise it will damage directly
- We Have a Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click MakerFocus and click Ask a question to email us! Looking forward to your consultation
- See more on Amazon...
Brand: MakerFocus | Manufacturer: MakerFocus
Dimensions: 0.04 x 1.02 x 0.67 inches | Weight: 0.02 Pounds
See On Amazon
Looking For Something Else?
Search