2.85mm(3mm) Matte PLA Filament 2.85mm White, 1kg Carton Spool PLA Filament 2.85 - Polymaker PolyTerra PLA 3D Printer Filament, Print with 2.85mm Openning 3D Printers Only
Asin: B08QMZ3HD4 | Model: 70823 | PartNumber: 70823 | Ean: 6938936708230
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.🛠️ 【Advanced Properties】 - Polyterra Pla Features A Ductility Similar To Pla+ Filament 2.85Mm (Less Brittle).
⚙️ 【Printing Settings】 - Nozzle: 210˚C, Bed: 50˚C, Speed: 60 Mm/S.
⚠️ 【Important Note】 - Please Make Sure To Double Check The Diameter Of Your Order As It May Automatically Change When Selecting A Color. Selected Diameter: Polyterra Pla Filament 2.85Mm White ( Pla Filament White ).
♻️ 【Cardboard Spool】 - Polyterra Pla Comes In A Fully Recycled Cardboard Packaging And Has Been Liked By Hundreds Of Thousands Of Polymaker Customers.
🌳 【Plant A Tree】 - For Every Spool Purchased, Polymaker Will Plant One Tree In The Area Where The Spool Is Purchased.
✨ 【Easy Support Removal】 - Polyterra Pla 3D Printer Filament White Is Designed To Support Itself And Breakaway Easily, Saving Your Time And Hassle During Support Removal.
🧵 【Tangle Free & Moisture Free】 - Polyterra Pla Is Carefully Winded To Avoid Any Tangling Issues, Dried And Vacuum Sealed In A Resealable Ziplock Bag With Desiccant. Please Make Sure To Never Let Go The Tip Of The Filament As It May Create Nodes. Holes On The Side Of The Spool Can Be Used To Prevent This Issue.
Features
- Matte Finish - PolyTerra PLA is a 2.85 filament PLA featuring an incredible matte surface finish which helps hide the layers of your print. PolyTerra PLA comes in more than 20 different colors. Selected color: White PLA filament 2.85mm ( PLA White Filament )
- Tangle Free & Moisture Free - PolyTerra PLA is carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable ziplock bag with desiccant. Please make sure to NEVER let go the tip of the filament as it may create nodes. Holes on the side of the spool can be used to prevent this issue
- Advanced Properties - PolyTerra PLA features a ductility similar to PLA+ filament 2.85mm (less brittle)
- Easy Support Removal - PolyTerra PLA 3D printer filament white is designed to support itself and breakaway easily, saving your time and hassle during support removal
- Cardboard Spool - PolyTerra PLA comes in a fully recycled cardboard packaging and has been liked by hundreds of thousands of Polymaker customers
- Plant a Tree - For every spool purchased, Polymaker will plant one tree in the area where the spool is purchased
- Printing Settings - Nozzle: 210 C, Bed: 50 C, Speed: 60 mm/s
- IMPORTANT NOTE - Please make sure to double check the diameter of your order as it may automatically change when selecting a color. Selected diameter: PolyTerra PLA filament 2.85mm White ( PLA filament White )
- See more on Amazon...
Brand: Polymaker | Manufacturer: Polymaker
Dimensions: 3.54 x 2.76 x 14.96 inches | Weight: 2.20 pounds
See On Amazon Similar To 2.85mm3mm Matte PLA Filament 2.85mm
#1
Polymaker Matte PLA Filament 1.75mm Black, 1.75 PLA 3D Printer Filament 1kg - PolyTerra 1.75 PLA Filament Matte Black 3D Printing Filament
Asin: B08QMBPZBF | Model: 70820 | PartNumber: 70820 | Ean: 6938936708209
🛠️ 【Advanced Properties】 - Polyterra 1.75 Pla Filament Features Good Ductility, Making It Less Brittle Than Usual Pla.
⚠️ 【Note】 - Please Use Pvp (Polyvinylpyrrolidine) Glue On The Print Bed If You Have A Bed Adhesion Issue. It's Also Recommended To Use Hardened Nozzles And Gear To Print Matte Pla.
♻️ 【Cardboard Spool】 - Polyterra Pla 1.75 Comes In Fully Recycled Cardboard Packaging And Has Been Liked By Hundreds Of Thousands Of Polymaker Customers.
⚙️ 【Printing Settings】 - Nozzle: 210˚C, Bed: 50˚C, Speed: 60 Mm/S. Selected Diameter: Polyterra Pla 1.75Mm Filament Black ( Pla Filament Black ).
✨ 【Easy Support Removal】 - Polyterra Pla 3D Printer Filament Black Is Designed To Support Itself And Breakaway Easily, Saving Your Time And Hassle During Support Removal.
🧵 【Tangle Free & Moisture Free】 - Polyterra Pla Is Carefully Winded To Avoid Any Tangling Issues, Dried, And Vacuum Sealed In A Resealable Ziplock Bag With Desiccant. Please Pass The Filament Through The Fixed Hole To Avoid Tangles After Use.
Features
- Matte Finish - PolyTerra PLA is a 3D printing filament featuring an incredible matte surface finish that helps hide the layers of your print. PolyTerra PLA comes in more than 20 different colors. Selected color: Black PLA filament 1.75mm ( PLA Black Filament )
- Tangle Free & Moisture Free - PolyTerra PLA is carefully winded to avoid any tangling issues, dried, and vacuum sealed in a resealable ziplock bag with desiccant. Please pass the filament through the fixed hole to avoid tangles after use
- Advanced Properties - PolyTerra 1.75 PLA filament features good ductility, making it less brittle than usual PLA
- Easy Support Removal - PolyTerra PLA 3D printer filament Black is designed to support itself and breakaway easily, saving your time and hassle during support removal
- Cardboard Spool - PolyTerra PLA 1.75 comes in fully recycled cardboard packaging and has been liked by hundreds of thousands of Polymaker customers
- Printing Settings - Nozzle: 210 C, Bed: 50 C, Speed: 60 mm/s. Selected diameter: PolyTerra PLA 1.75mm filament Black ( PLA filament Black )
- NOTE - Please use PVP (PolyVinylPyrrolidine) glue on the print bed if you have a bed adhesion issue. It's also recommended to use hardened nozzles and gear to print matte PLA
- See more on Amazon...
Brand: Polymaker | Manufacturer: Polymaker
Dimensions: 2.56 x 7.87 x 7.87 inches | Weight: 2.20 pounds
Warranty: 90 days
See On Amazon #2
OVERTURE PLA Matte 3D Printer Filament 1.75mm, Matte PLA 1kg Cardboard Spool (2.2lbs), Dimensional Accuracy +/- 0.02 mm (Matte Black)
Asin: B089S2QDHD | Model: OVFBC175 | PartNumber: OVFBC175 | Ean: 0810031295074, 0810031292400 | UPC: 810031292400, 810031295074
【Dimensional Accuracy & Consistency】Advanced Ccd Diameter Measuring And Self-Adaptive Control System In The Manufacturing Guarantee These Matte Pla Filaments To Be Strict Tolerances. Diameter 1.75Mm, Dimensional Accuracy (98%) + / - 0.02 Mm Without Any Exaggeration.
【Risk Free & Lifetime Guarantee】No Matter What Difficulties You Encounter During Printing, Overture Will Be Right By Your Side To Assist You, With Professional Knowledge To Help You Achieve Perfect Printing, Overture, Are Your Reliable 3D Filaments&Accessories Supplier.
【Wide Compatibility And Color Selection】 Overture Filaments Seamlessly Integrates With Most Consumer And Industrial 3D Printers. Explore Your Creative Side With Our Extensive Selection Of Vibrant Colors, Ensuring A Spectrum Of Possibilities For Your Unique Creations.
【Easy To Print & Advanced Properties】 Experience Improved Overhang Performance And Greater Design Intricacy With Matte Pla. Rafts, Brims, And Tree Supports Break Away Easily Leaving Matte Finish. Elevate Your 3D Printing Experience With The Perfect Combination Of Ease And Advanced Properties.
Features
- High-Grade Matte PLA Introducing our newly launched Matte PLA filament. Designed to print with a gloss-free finish, achieving a frosted texture that conceals layer lines. Perfect for creations that demand a refined and flawless appearance
- Easy to Print & Advanced Properties Experience improved overhang performance and greater design intricacy with Matte PLA. Rafts, brims, and tree supports break away easily leaving matte finish. Elevate your 3D printing experience with the perfect combination of ease and advanced properties
- Dimensional Accuracy & Consistency Advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these Matte PLA filaments to be strict tolerances. Diameter 1.75mm, dimensional accuracy (98%) + / - 0.02 mm without any exaggeration
- Wide Compatibility and Color Selection Overture filaments seamlessly integrates with most consumer and industrial 3D printers. Explore your creative side with our extensive selection of vibrant colors, ensuring a spectrum of possibilities for your unique creations
- Risk Free & Lifetime Guarantee No matter what difficulties you encounter during printing, Overture will be right by your side to assist you, with professional knowledge to help you achieve perfect printing, Overture, are your reliable 3d filaments&accessories supplier
- See more on Amazon...
Brand: OVERTURE | Manufacturer: OVERTURE
Dimensions: 8.23 x 8.78 x 2.95 inches | Weight: 2.20 pounds
See On Amazon #3
ELEGOO Matte PLA Filament Matte Black 2KG, 1.75mm 3D Printer Filament Dimensional Accuracy +/- 0.02mm, 2pcs 1kg Carboard Spool (2.2lbs) for Most FDM 3D Printers
Asin: B0CH7T7B2S
【Perfect Winding For Better Result】Each Spool Of Filament Is Neatly Wound, Which Prevents Tangles And Feeding Issues, Giving Out Perfect Printing Results.
【Fit For Most 3D Printer】Universal Compatibility With All The Common 1.75Mm Fdm 3D Printers, Such As Neptune 3 Series, Neptune 4 Series And More.
【No Clogging & No Bubble】Elegoo Pla Filament Is Manufactured In Dry And Dust-Free Environment And Pack With Vaccuumed Sealed Package, Away From Any Dampness Or Air, No Clogging And Bubbling Problems.
【Top-Notch Accuracy & Consistent】Elegoo Use Advanced Measurement Procedures During Manufacturing To Guarantee All Filament Is 1.75 Mm Diameter, Accuracy +/- 0.02 Mm, Ensuring Consistency And Precision In Every Print.
Features
- Beautiful Matte Finish ELEGOO MATTE PLA produce a beautiful matte, low gloss and smooth finish, resulting in a printed object with nearly invisible layer lines
- Top-Notch Accuracy & Consistent ELEGOO use advanced measurement procedures during manufacturing to guarantee all filament is 1.75 mm diameter, accuracy +/- 0.02 mm, ensuring consistency and precision in every print
- Perfect Winding for Better Result Each spool of filament is neatly wound, which prevents tangles and feeding issues, giving out perfect printing results
- No Clogging & No Bubble ELEGOO PLA Filament is manufactured in dry and dust-free environment and pack with vaccuumed sealed package, away from any dampness or air, no clogging and bubbling problems
- Fit for Most 3D Printer Universal compatibility with all the common 1.75mm FDM 3D printers, such as Neptune 3 series, Neptune 4 series and more
- See more on Amazon...
Brand: ELEGOO | Manufacturer: ELEGOO
Weight: 4.41 pounds
See On Amazon #4
SUNLU 3D Printer Filament PLA Matte 1.75mm, Neatly Wound Filament, Smooth Matte Finish, Print with 99% FDM 3D Printers, 1kg Spool (2.2lbs), 330 Meters, Matte Black
Asin: B0BFHJ4131 | Model: FR-PLAYG-BK-1KG | PartNumber: FR-PLAYG-BK-1KG
🎄【Stable Dimensional Tolerance】- Sunlu Pla Matte Filament Dimensional Accuracy +/- 0.03Mm. Minimum Tolerance And Low Warping To Ensure Consistent Feeding And Stable Prints, Good Layer Bonding, Less Stringing, Easy Handling, Resulting In An Outstanding Surface Finish And Are Highly Precise..
🎄【No Odor & No Bubbles】- Sunlu 3D Printer Filament Are Mainly Made Of Corn Starch, Which Is Odorless When Printing. Vacuum Sealed, There Is Also A Desiccant Package, Vacuum Packaging To Avoid Dust And Keep The Filament Dry. Keep The Filament Dry..
🎅【Recommend Settings & Easy To Operate】- We Recommend Printing The Pla Matte Filament At Nozzle Temperature Of 200-230°C, Bed Temperature Of 50-65°C, And Printing Speed Of 50-100Mm/S. The Length Of The Filament Can Reach About 330 Meters. The Operation Is Very Simple And Suitable For Novices..
🎅【Pla Features & Matte Color】- Sunlu's Newly Upgraded Matte Pla Filament Colors Retain The Original Sunlu Pla Advantages: Easy Printing, No Clogging, While Adding More Color Options. Matte Pla Can Print Prints With Non-Glossy Colors And Frosted Textures, Suitable For More Premium And Mysterious 3D Models..
Features
- SUNLU 100% Wound Neatly 3D Filament - SUNLU R&D team has mastered advanced technology and produced 100% Neatly Wound 3D Printer Filament, which is impossible for other brands. No knot, no winding, improve printing efficiency.
- PLA Features & Matte Color - SUNLU's newly upgraded Matte PLA Filament colors retain the original SUNLU PLA advantages: Easy Printing, No Clogging, while adding more color options. Matte PLA can print prints with non-glossy colors and frosted textures, suitable for more premium and mysterious 3D models.
- Stable Dimensional Tolerance - SUNLU PLA MATTE Filament Dimensional Accuracy +/- 0.03mm. Minimum tolerance and low warping to ensure consistent feeding and stable prints, good layer bonding, less stringing, easy handling, resulting in an outstanding surface finish and are highly precise.
- Recommend Settings & Easy to operate - We recommend printing the PLA Matte Filament at nozzle temperature of 200-230 C, bed temperature of 50-65 C, and printing speed of 50-100mm/s. The length of the filament can reach about 330 Meters. The operation is very simple and suitable for novices.
- No Odor & No Bubbles - SUNLU 3D Printer Filament are mainly made of corn starch, which is odorless when printing. Vacuum sealed, there is also a desiccant package, vacuum packaging to avoid dust and keep the filament dry. keep the filament dry.
- See more on Amazon...
Brand: SUNLU | Manufacturer: SUNLU
Dimensions: 7.87 x 7.87 x 2.56 inches | Weight: 2.20 pounds
Warranty: 1year
See On Amazon #5
Matte PLA Filament 1.75mm, Upgrade Matte 3D Printer PLA Filament, 1KG Cardboard Spool 3D Printing Filament for 3D Printers(Matte Black)
Asin: B0B28TN1LY | Model: HJ-Matte PLA-175DP1KG-US | PartNumber: HJ-Matte PLA-175DP1KG-US | Ean: 0768479331680 | UPC: 768479331680
【Tangle Free & Moisture Free】Matte Pla Filament Is Carefully Winded To Avoid Any Tangling Issues, Dried And Vacuum Sealed In A Resealable Ziplock Bag With Desiccant..
【High Compatibility】Compatible With Most Of Fdm 3D Printers, Such As:Bamboo Lab, Prusa, Makerbot, Ultimaker, Mk3, Ender 3, Simplify3d, Flashforge, Raise3d Etc. Printing Temperature: 190-230℃ (Recommended Temperature 215℃) Bed Temperature: 45-60°C Fan Speed: 100% Printing Speed: 40-100Mm/S..
【Odorless & No Bubble】Matte Pla Filaments Deliver Excellent Printing Quality With No Odor And Low Warpage During Printing; Complete Drying For 24 Hours Before Vacuum Packaging To Effectively Protect The Filament From Moisture, No Stringing And Bubble-Free..
【Easy Support Removal】Matte Pla 3D Printer Filament Is Designed To Support Itself And Breakaway Easily, Saving Your Time And Hassle During Support Removal..
Features
- Matte Finish 3DHoJor Matte PLA Filament 1.75mm,matte finish which helps hide the layers of your print,bed adhesion and extrusion output has been significantly improved. Matte PLA filament can be used to make prints with shine-free and frosted texture.
- Easy Support Removal Matte PLA 3D printer filament is designed to support itself and breakaway easily, saving your time and hassle during support removal.
- Tangle Free & Moisture Free Matte PLA Filament is carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable ziplock bag with desiccant.
- Odorless & No Bubble Matte PLA filaments deliver excellent printing quality with no odor and low warpage during printing; Complete drying for 24 hours before vacuum packaging to effectively protect the filament from moisture, no stringing and bubble-free.
- High Compatibility Compatible with Most of FDM 3D Printers, such as:Bamboo Lab, Prusa, MakerBot, UltiMaker, MK3, Ender 3, Simplify3D, Flashforge, Raise3D etc. Printing Temperature: 190-230 (Recommended Temperature 215 ) Bed Temperature: 45-60 C Fan Speed: 100% Printing Speed: 40-100mm/s.
- See more on Amazon...
Brand: 3DHoJor | Manufacturer: 3DHoJor
Weight: 2.20 Pounds
See On Amazon #6
FLASHFORGE PLA Filament 1.75mm, 3D Printer Filament 1kg (2.2lbs) Spool, Dimensional Accuracy +/- 0.02mm, 3D Printing Filament Easy to Use and Fits for Most FDM 3D Printers (Matte Black)
Asin: B09V7YHY73 | Model: FF-01 | PartNumber: FF-01
Details Such As Sharp Corners And Edges Print Well And Pla Printed Objects Will Generally Have A Glossier Look And Feel.
Flashforge 3D Printing Filament Apply To All Types Of Fff 3D Printers;Eg Flashforge Finder,Creator Pro Etc;No Need Heating Raft, Low Demand To Printers.
Match Up With Pva, Printing Models Which Are Hollow-Out And Have Large Inclination Angles.
Features
- Be harmless to human, be friendly to environment;no smoke or unpleasant smell when printing
- Match up with PVA, printing models which are hollow-out and have large inclination angles
- Details such as sharp corners and edges print well and PLA printed objects will generally have a glossier look and feel
- Flashforge 3d printing filament apply to all types of FFF 3D printers;eg Flashforge Finder,Creator pro etc;no need heating raft, low demand to printers
- See more on Amazon...
Brand: FLASHFORGE | Manufacturer: Zhejiang Flashforge 3D Technology Co., Ltd.
Weight: 2.20 Pounds
Warranty: 1 year
See On Amazon #7
Stronghero3D 3D Printer PLA Filament 1.75mm,Macaron,Matte,Multi Color Filament Net Weight 1kg for Ender3 CR10
Asin: B0C9CM25VD | Ean: 0743450939369 | UPC: 743450939369
Pla Multicolor Filament, Rainbow Filament,Macaron Filament.
A Ventilated Environment Is Required, Some Smell Release During The Printing Process Of The Material.
Setting For 3D Printer, Nozzle 190 Degree,Heatbed 0-50 Degree,Retraction Length 5Mm,Retraction Speed 50Mm/S.
Pla Filament 1.75Mm,Net Weight 1Kg,Pla Matte Filament.
Features
- Macaron Matte filament,multi color filament
- PLA filament 1.75mm,net weight 1kg,pla matte filament
- PLA multicolor filament, rainbow filament,macaron filament
- Setting for 3d printer, nozzle 190 degree,heatbed 0-50 degree,retraction length 5mm,retraction speed 50mm/s
- A ventilated environment is required, some smell release during the printing process of the material
- See more on Amazon...
Brand: 3DimsFila | Manufacturer: 3DimsFila
Weight: 2.20 pounds
Warranty: 4 months
See On Amazon #8
eSUN Upgraded Matte PLA Filament 1.75mm, Excellent Adhesion Matte 3D Printer PLA Filament, 1KG Spool 3D Printing Filament for 3D Printers, Paper Reel, Deep Black
Asin: B0B9MN7TXG | Model: ePLA-Matte-P175DB1KG-US | PartNumber: ePLA-Matte-P175DB1KG-US
【Stable Dimensional Tolerance】Minimum Tolerance And Low Warping To Ensure Consistent Feeding And Stable Prints, Good Layer Bonding, Less Stringing, No Bubbles, Easy Handling, Resulting In An Outstanding Surface Finish And Are Highly Precise..
【Environmental Friendly Package & Reel】Scrap Is Reused To Produce Recyclable Spool And Packaging Box. Esun Filament Comes In A Sealed Vacuum Bag With A Desiccant Bag, Easily Keep Your 3D Printer Filaments At An Optimal Storage Condition And Free From Dust Or Dirt Before Opening The Vacuumed Sealed Packaging..
【Compatibility Printers】Compatible With Most Of Fdm 3D Printers, Such As: Bambu Lab P1p /X1, Voron 2.4, Raise3d, Prusa, Creality Ender 3 And Ender 7..
【Tangle Free & No Plugging】Full 1Kg 3D Printer Filament Reel, Perfect Roundness And Very Tight Diameter Tolerance, Good Winding, Does Not Overlap Or Tangle. Melt Well, Feed Smoothly And Constantly Without Clogging The Nozzle Or Extruder, High Successful Printing Rate..
【High Toughness & Better Adhesion】Compared To Normal Pla Filament, Esun Matte Pla Has Higher Toughness.Printed Models Are Not Easy To Break Or Crack, Which Can Be Widly Used In Accessory, Home Decoration, Toy, Sculpture, Shell And Cosplay. With Upgraded Paper Reel, Esun Matte Pla Has Better Adhesion And Printibility Which Improves The Problem Of Bottom Adhesion On The Plate..
Features
- Delicate Matte PLA With excellent matte printed surface, eSUN Matte PLA has better printing effect and doesn't have obvious layer lines than normal PLA. Not easy to break. Supporting structure of it is easy to peel off.
- High Toughness & Better Adhesion Compared to normal PLA filament, eSUN Matte PLA has higher toughness.Printed models are not easy to break or crack, which can be widly used in accessory, home decoration, toy, sculpture, shell and COSPLAY. With upgraded paper reel, eSUN Matte PLA has better adhesion and printibility which improves the problem of bottom adhesion on the plate.
- Stable Dimensional Tolerance Minimum tolerance and low warping to ensure consistent feeding and stable prints, good layer bonding, less stringing, no bubbles, easy handling, resulting in an outstanding surface finish and are highly precise.
- Tangle Free & No Plugging Full 1KG 3D printer filament reel, perfect roundness and very tight diameter tolerance, good winding, does not overlap or tangle. Melt well, feed smoothly and constantly without clogging the nozzle or extruder, high successful printing rate.
- Environmental Friendly Package & Reel Scrap is reused to produce recyclable spool and packaging box. eSUN filament comes in a sealed vacuum bag with a desiccant bag, easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging.
- Compatibility Printers Compatible with Most of FDM 3D Printers, such as: Bambu Lab P1P /X1, Voron 2.4, Raise3D, Prusa, Creality Ender 3 and Ender 7.
- See more on Amazon...
Brand: eSUN | Manufacturer: eSUN
Weight: 2.20 Pounds
See On Amazon #9
2.85mm(3mm) PLA Filament 2.85mm, 1kg High Rigidity Black PLA 2.85 - Polymaker PolyLite PLA 3D Printer Filament Black, Print with 2.85mm Openning 3D Printers Only
Asin: B09LV83DK1 | Model: PA02016 | PartNumber: PA02016 | Ean: 6938936711025
🛠️ 【Good Layer Adhesion & Rigidity】 - No Warping, No Jamming, No Blobs Or Layer Delamination Issues. Polylite Pla Is A Worry-Free Product That Has Great Bed Adhesion, Very Consistent Color, And Dimensional Accuracy. It Is More Rigid Than Almost All The Competitive Filaments Such As Pla+ Filament 【Note - Turn Off The Fan For The First Layer For Improved Bed Adhesion】.
🛡️ 【 Risk-Free & Lifetime Technical Support】 - We Offer A Full Refund If The Product Is Not Performing As Expected. Let Us Help You Get Your Perfect Beautiful Prints And Contact Us Via Amazon Anytime You Need.
⚙ 【Printing Settings】 - Nozzle: 210˚C; Bed: 50˚C; Speed: 60Mm/S.
⚠️ 【2.85Mm Pla Black】 - Selected Filament: Polylite Pla Filament 2.85Mm Black ( Pla Filament Black ).
♻️ 【Cardboard Spool】 - Comes In Upgraded 3.0 Version Packaging With Fully Recycled Cardboard Spool And Box.
🧵 【Tangle Free & Moisture Free】 - Polylite Pla Is Carefully Winded To Avoid Any Tangling Issues, Dried, And Vacuum-Sealed In A Resealable Ziplock Bag With Desiccant. Please Make Sure To Never Let Go Of The Tip Of The Filament As It May Create Nodes. Holes On The Side Of The Spool Can Be Used To Prevent This Issue.
Features
- Wide Range of Colors 2.85mm PLA - More than 20 different colors and effects. Regular colors for your day-to-day creations. Selected color: Black PLA filament 2.85mm ( PLA Black Filament )
- Tangle Free & Moisture Free - PolyLite PLA is carefully winded to avoid any tangling issues, dried, and vacuum-sealed in a resealable ziplock bag with desiccant. Please make sure to NEVER let go of the tip of the filament as it may create nodes. Holes on the side of the spool can be used to prevent this issue
- Good Layer Adhesion & Rigidity - No warping, no jamming, no blobs or layer delamination issues. PolyLite PLA is a worry-free product that has great bed adhesion, very consistent color, and dimensional accuracy. It is more rigid than almost all the competitive filaments such as PLA+ filament Note - turn off the fan for the first layer for improved bed adhesion
- Cardboard Spool - Comes in upgraded 3.0 version packaging with fully recycled cardboard spool and box
- Printing Settings - Nozzle: 210 C; Bed: 50 C; Speed: 60mm/s
- 2.85mm PLA Black - Selected filament: PolyLite PLA filament 2.85mm Black ( PLA filament Black )
- RISK-FREE & LIFETIME TECHNICAL SUPPORT - We offer a full refund if the product is not performing as expected. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need
- See more on Amazon...
Brand: Polymaker | Manufacturer: Polymaker
Dimensions: 6.69 x 6.30 x 14.57 inches | Weight: 2.20 Pounds
See On Amazon #10
ANYCUBIC Matte PLA Filament 1.75mm, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool (2.2 lbs), Matte Black
Asin: B09X1F5MWW
【𝐂𝐥𝐨𝐠-𝐅𝐫𝐞𝐞 & 𝐁𝐮𝐛𝐛𝐥𝐞-𝐅𝐫𝐞𝐞】 Designed And Manufactured With A Clog-Free Patent To Guarantee A Smooth And Stable Printing Experience With Our Pla Refills. Completely Dried For 24 Hours Before Packaging And Vacuum Sealed With Desiccants In Nylon Re-Bag Enable Much Smoother And More Stable Printing. The Larger Spool Inner Diameter Design Makes Feeding Smoother.
【𝐅𝐢𝐥𝐚𝐦𝐞𝐧𝐭 𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧】 1.Install The Spool On The Spool Holder Of A 3D Printer, And Preheat The Nozzle Of The 3D Printer. 2. Cut The Filament Tip Diagonally, And Guide It Through The Extruder And Feeding Tube. 3. Manually Push The Filament Through The Feeding Tube To The Nozzle, Until The Filament Melts Through The Nozzle. Note: When Installing And Changing Filament, We Highly Suggest Preheating The Nozzle First To Reduce The Nozzle Block Risk.
【𝐄𝐜𝐨-𝐅𝐫𝐢𝐞𝐧𝐝𝐥𝐲 & 𝐖𝐢𝐝𝐞 𝐂𝐨𝐦𝐩𝐚𝐭𝐢𝐛𝐢𝐥𝐢𝐭𝐲】 Made From Starch Raw Materials Derived From Renewable Plant Resources, Pla Filament Boasts Lower Melting Temperatures And Even Does Not Need A Heated Bed. No Odor, No Pollution, And Non-Toxic During Printing. Anycubic Pla Filament Compatible Perfectly With Most Fdm 3D Printers And 3D Pens That Use 1.75Mm Filament On The Market.
【𝐀𝐜𝐜𝐮𝐫𝐚𝐜𝐲 & 𝐄𝐚𝐬𝐲 𝐒𝐮𝐩𝐩𝐨𝐫𝐭 𝐑𝐞𝐦𝐨𝐯𝐚𝐥】 Anycubic 3D Printer Pla Filament Of 1.75Mm Diameter, Minimum Dimensional Tolerance ±0.02Mm, Which Makes Filament Outflow Smoother, Came Out Homogeneous. With A 3 Years Storage Capacity, It Has Excellent Mechanical Properties With Strong Toughness And Low Shrinkage Which Makes It Easier To Remove The Support Of The Prints.
Features
- & Matte texture with fewer visible layer lines provides with soft touch and elegance. Macaron color enhances the prints' quality with a higher level of detail. The 3D printing matte PLA filament was neat on the roll and left the spool easily without any crossed turns. Resulting in less thread pulling and twisting, no clogging, super under-extruding
- & Anycubic 3D Printer PLA filament of 1.75mm diameter, Minimum dimensional tolerance 0.02mm, which makes filament outflow smoother, came out homogeneous. With a 3 years storage capacity, It has excellent mechanical properties with strong toughness and low shrinkage which makes it easier to remove the support of the prints
- - & - Designed and Manufactured with a Clog-Free patent to guarantee a smooth and stable printing experience with our PLA refills. Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag enable much smoother and more stable printing. The larger spool inner diameter design makes feeding smoother
- - & Made from starch raw materials derived from renewable plant resources, PLA filament boasts lower melting temperatures and even does not need a heated bed. No odor, no pollution, and non-toxic during printing. Anycubic PLA Filament Compatible perfectly with most FDM 3D Printers and 3D Pens that use 1.75MM filament on the market
- 1.Install the spool on the spool holder of a 3D printer, and preheat the nozzle of the 3D printer. 2. Cut the filament tip diagonally, and guide it through the extruder and feeding tube. 3. Manually push the filament through the feeding tube to the nozzle, until the filament melts through the nozzle. Note: When installing and changing filament, we highly suggest preheating the nozzle first to reduce the nozzle block risk
- See more on Amazon...
Brand: ANYCUBIC | Manufacturer: HYGBK-10
Weight: 2.20 Pounds
See On Amazon #11
DO3D Silk Black PLA Satin Shiny 3D Printer Filament, 1.75mm Diameter 1kg Spool 2.2lbs for FDM 3D Printers
Asin: B07V6C59JS | Ean: 0747130488307 | UPC: 747130488307
Easy To Use & Tangle-Free: Our Pla Filament Is Designed To Be Easy To Use, With Full Mechanical Winding And Manual Examination To Ensure That The Line Is Neatly Arranged And Less Tangled. The Larger Spool Inner Diameter Design Allows For Easy Feeding, Making The Printing Process Hassle-Free..
Wide Compatibility: Our Pla Filament Is Universally Compatible With Most Common 1.75Mm Fdm 3D Printers On The Market. With High-Quality Manufacturing Standards And A Small Dimensional Tolerance Of +/- 0.03Mm, Our Filament Ensures A Seamless Fit With Your Printer For Optimal Printing Performance..
Clog-Free & Bubble-Free: Designed And Manufactured With Clog-Free Technology, Our Pla Filament Guarantees Superb Layer Bonding And Great Fluidity For Smooth And Stable Extrusion. It Is Also Complete Dried For 24 Hours Before Packaging And Vacuum Sealed With Desiccants To Protect It From Moisture, Ensuring No Clogging Or Bubbling Problems During Printing..
Dimensional Accuracy & Consistency: We Guarantee Strict Tolerances For Our Pla Filaments, With A Diameter Of 1.75Mm And A Dimensional Accuracy Of +/- 0.03Mm. This Ensures That Your Prints Come Out Perfectly Every Time, Without Any Warping Or Shrinkage..
Features
- High-Quality PLA Filament: Our DO3D PLA Filament is made of high-quality PLA, a thermoplastic material known for its excellent printing properties. With a lower melting temperature and ease of use, our filament ensures smooth and consistent printing results.
- Dimensional Accuracy & Consistency: We guarantee strict tolerances for our PLA filaments, with a diameter of 1.75mm and a dimensional accuracy of +/- 0.03mm. This ensures that your prints come out perfectly every time, without any warping or shrinkage.
- Easy to Use & Tangle-Free: Our PLA filament is designed to be easy to use, with full mechanical winding and manual examination to ensure that the line is neatly arranged and less tangled. The larger spool inner diameter design allows for easy feeding, making the printing process hassle-free.
- Clog-Free & Bubble-Free: Designed and manufactured with clog-free technology, our PLA filament guarantees superb layer bonding and great fluidity for smooth and stable extrusion. It is also complete dried for 24 hours before packaging and vacuum sealed with desiccants to protect it from moisture, ensuring no clogging or bubbling problems during printing.
- Wide Compatibility: Our PLA filament is universally compatible with most common 1.75mm FDM 3D printers on the market. With high-quality manufacturing standards and a small dimensional tolerance of +/- 0.03mm, our filament ensures a seamless fit with your printer for optimal printing performance.
- See more on Amazon...
Brand: DO3D | Manufacturer: DO3D
Weight: 2.65 pounds
See On Amazon #12
Polymaker 3kg Matte PLA Filament 1.75mm, Black PLA 3D Printer Filament 1.75 - PolyTerra 1.75 PLA Filament Matte Black 3kg, Cost Effective Large Roll PLA 3D Printing Filament for Big Projects
Asin: B0B1DG455J | Model: PA04007 | PartNumber: PA04007 | Ean: 6938936701934
🛠️ 【Advanced Properties】 - Polyterra 1.75 Pla Filament Features Good Ductility, Making It Less Brittle Than Usual Pla.
♻️ 【Cardboard Spool】 - Polyterra Pla 1.75 Comes In Fully Recycled Cardboard Packaging And Has Been Liked By Hundreds Of Thousands Of Polymaker Customers.
✨ 【Easy Support Removal】 - Polyterra Pla 3D Printer Filament Black Is Designed To Support Itself And Breakaway Easily, Saving Your Time And Hassle During Support Removal.
🧵 【Tangle Free & Moisture Free】 - Polyterra Pla Is Carefully Winded To Avoid Any Tangling Issues, Dried, And Vacuum Sealed In A Resealable Ziplock Bag With Desiccant. Please Pass The Filament Through The Fixed Hole To Avoid Tangles After Use.
Features
- Matte Finish - PolyTerra 3kg PLA is a 3D printing filament featuring an incredible matte surface finish that helps hide the layers of your print. PolyTerra PLA comes in more than 20 different colors. Selected color: black PLA filament 1.75mm ( PLA black Filament )
- Tangle Free & Moisture Free - PolyTerra PLA is carefully winded to avoid any tangling issues, dried, and vacuum sealed in a resealable ziplock bag with desiccant. Please pass the filament through the fixed hole to avoid tangles after use
- Advanced Properties - PolyTerra 1.75 PLA filament features good ductility, making it less brittle than usual PLA
- Easy Support Removal - PolyTerra PLA 3D printer filament black is designed to support itself and breakaway easily, saving your time and hassle during support removal
- Cardboard Spool - PolyTerra PLA 1.75 comes in fully recycled cardboard packaging and has been liked by hundreds of thousands of Polymaker customers
- See more on Amazon...
Brand: Polymaker | Manufacturer: Polymaker
Dimensions: 4.69 x 9.84 x 9.84 inches | Weight: 6.61 Pounds
See On Amazon #13
MIKA3D Silk Black Shiny PLA 3D Printing Filament, 1KG 2.2Lbs 3D Print Material with 1.75mm High Diameter Accuracy, Neatly Wound Silk PLA Widely Support for FDM 3D Printers
Asin: B0BLYW8DZ2 | Model: Silk Shiny PLA 3D Printer Filament | PartNumber: Silk Shiny PLA 3D Printer Filament | Ean: 0198168458822 | UPC: 198168458822
Strong Compatibility: 1.75Mm High Diameter Tolerance, To Ensure Consistent Feeding And Smooth Printing, It's Perfectly Compatible With Most Of The Fdm 3D Printers And 3D Pens In Market, Such As Creality Ender, Anycubic, Flashforge, Monoprice, Scrib3d, Mynt3d, Etc.
Good Package & Warranty: For Each Spool Filament, It's Packed With Good Vacuum Package, Each Spool Filament Net Weight: 1Kg, Around 335M Total Length; If Any Question, Pls Kindly Inform Us At Any Time, We'll Always Here For You, To Serve You Best.
100% Tangle-Free Tips And Printing Setting: All Of Our Filament Are 100% Tangle-Free Before Package Opened, Pls Kindly Fix Filament End After Each Time Printing, Pls Make Sure To Insert Free End Of Filament Into Spool Holes, To Avoid Being Tangled For Next Time Use; To Improve Printing Quality, Pls Use New 0.4Mm+ 3D Printer Nozzle..
High Quality Control: All Of Our Silk Pla Is Made By 100% Eco-Friendly New Raw Material, And Low Odor, No Bubble, Melt Well, Feed Smoothly, No Jamming, No Warping, Easy To Print, Provide Excellent Surface Finished Of Printed Parts;.
Features
- Great Silk Luster Surface PLA Filament: It's Silk Like Feel Silky Shinny Surface with Silk Luster, Giving Smooth, Pearly and Unique Touch; Without Polishing, You will Get a Gorgeous Printing Surface, It's Perfectly for 3D Printing Field, Such as DIY, Industry, Education, etc
- High Quality Control: All of Our Silk PLA is Made by 100% Eco-Friendly New Raw Material, and Low Odor, No Bubble, Melt Well, Feed Smoothly, No Jamming, No Warping, Easy to Print, Provide Excellent Surface Finished of Printed Parts;
- Strong Compatibility: 1.75mm High Diameter Tolerance, To Ensure Consistent Feeding and Smooth Printing, It's Perfectly Compatible with Most of the FDM 3D Printers and 3D Pens in Market, Such as Creality Ender, ANYCUBIC, Flashforge, Monoprice, SCRIB3D, MYNT3D, etc
- 100% Tangle-Free Tips and Printing Setting: All of Our Filament are 100% Tangle-Free before Package Opened, Pls Kindly Fix Filament End after Each Time Printing, Pls Make Sure to Insert Free End of Filament into Spool Holes, to Avoid Being Tangled for Next Time Use; To Improve Printing Quality, Pls Use New 0.4mm+ 3D Printer Nozzle.
- Good Package & Warranty: For Each Spool Filament, It's Packed with Good Vacuum Package, Each Spool Filament Net Weight: 1kg, Around 335m Total Length; If Any Question, Pls Kindly Inform us at Any Time, We'll Always Here for You, To Serve you Best
- See more on Amazon...
Brand: MIKA3D | Manufacturer: MIKA3D
Weight: 2.20 pounds
Warranty: 30
See On Amazon #14
SainSmart GT-3 High Speed Matte PLA Filament 1.75mm, High Flow 3D Printer Filament, White, 2.2 LBS (1KG) Spool, Dimensional Accuracy +/- 0.02mm
Asin: B0C3LN3LH1 | Model: 510257010 | PartNumber: 510257010 | Ean: 0816550027110 | UPC: 816550027110
Matte Finish & Durable: The Model Made From This Material Will Have A Matte Finish, Which Will Help Hide The Layer Lines From View. It Is Also Stronger Than Models Printed With Regular Pla..
Compatibility: This Filament, With Its 1.75Mm Diameter, Will Work On A Variety Of 3D Printers Like Prusa, Creality, Ankermake M5, Qi Di, Anycubic, Flashforge, Monoprice, Scrib3d, Mynt3d, Etc..
For Using The Glass Printing Platform, It Is Recommended To Apply More Glue When Printing, Or Use Masking Paper, And Increase The Temperature Of The Hotbed To About 65°C. Bamboo Studio Setting For Gt-3 Pla-Hf Matte Filaments: Bit.Ly/3Qdhtnx.
No Clogging Or Jamming: This Pla Filament Has A Softening Temperature Of 140°C, Making It Resistant To The Cooling Effects From The Nozzle. This Solves The Obstruction Issue..
Easy-To-Remove Support: Detaching Supports Is A Quick And Easy Process When Using This Filament. They Can Be Taken Off Without Damaging The Model Underneath, Keeping All Of Its Fine Details Intact..
Features
- Lightning Fast: The SainSmart GT-3 PLA filament is designed to balance high printing speeds of up to 500mm/s with printing quality. Its excellent fluidity and viscosity factors reduce stringing and sagging, taking your printing to the next level. For optimal results, we recommend a printing speed of around 300 mm/s.
- Easy-to-Remove Support: Detaching supports is a quick and easy process when using this filament. They can be taken off without damaging the model underneath, keeping all of its fine details intact.
- Matte Finish & Durable: The model made from this material will have a matte finish, which will help hide the layer lines from view. It is also stronger than models printed with regular PLA.
- No Clogging or Jamming: This PLA filament has a softening temperature of 140 C, making it resistant to the cooling effects from the nozzle. This solves the obstruction issue.
- Compatibility: This filament, with its 1.75mm diameter, will work on a variety of 3D printers like Prusa, Creality, AnkerMake M5, QI DI, ANYCUBIC, Flashforge, Monoprice, SCRIB3D, MYNT3D, etc.
- For using the glass printing platform, it is recommended to apply more glue when printing, or use masking paper, and increase the temperature of the hotbed to about 65 C. Bamboo studio setting for GT-3 PLA-HF Matte Filaments: bit.ly/3qDhtnX
- See more on Amazon...
Brand: SainSmart | Manufacturer: SainSmart
Weight: 2.20 Pounds
Warranty: one-year warranty
See On Amazon #15
AnkerMake PLA+ Matte 3D Printing Filament, AnkerMake Official Filament, 2-Pack, 4.4 lb / 2 kg, Matte Texture, Smooth, Designed for High-Speed Printing - Matte Gray
Asin: B0C5XXT9DK | Ean: 0194644138844 | UPC: 194644138844
Smooth Surface, Professional Finish: The Smooth Surface Delivers A Professional Finish That Is Also Easy To Paint..
Made From Corn-Derived Materials: Ankermake Filament Is Made Out Of Non-Toxic Bio-Materials Extracted From Corn..
Official Ankermake Filament: Quality Is Guaranteed With More Than 12 Months Of Testing..
Matte Texture, Premium Look: The Matte Texture Provides A Sophisticated And Refined Look To Your 3D-Printed Creations..
Features
- AnkerMake Speed Lab Certified: Get high-quality 3D prints every time with this AnkerMake filament. Certified by the AnkerMake Speed Lab and validated through over 12 months of high-demand printing tests. Give your prints stability even when cruising in Fast Mode.
- Matte Texture, Premium Look: The matte texture provides a sophisticated and refined look to your 3D-printed creations.
- Smooth Surface, Professional Finish: The smooth surface delivers a professional finish that is also easy to paint.
- Official AnkerMake Filament: Quality is guaranteed with more than 12 months of testing.
- Made From Corn-Derived Materials: AnkerMake filament is made out of non-toxic bio-materials extracted from corn.
- See more on Amazon...
Brand: AnkerMake | Manufacturer: Anker
Weight: 4.41 pounds
Warranty: 24 months
See On Amazon #16
ERYONE High Speed Matte Filament PLA 1.75mm +/- 0.03mm, 3D Printing PLA Pro Filament Fit Most FDM Printer, 1kg (2.2LBS) / Spool, Black
Asin: B0CHF8YX6Z | Model: HSMPblack | PartNumber: HSMPblack | Ean: 0810168130743 | UPC: 810168130743
3.Print Temperature Range: 190??-230??; Bed: 60-70??, Speed 30-400Mm/S..
5.Weight And Spool Diameter: Net Weight 1Kg, Shipping Weight 1.35Kg; Spool Inner Diameter 57Mm, Spool Outer Diameter 200Mm, Height 64Mm..
4.Vacuumed Sealed Packaging: Sealed Vacuum Bag To Keep It Dry And Keep Out Dust;.
2. [Wide Compatibility] Compatible With Most Fdm 3D Printers, Such As: Ankermake M5, Bambu Lab P1p, Bambu Lab X1 Series, Prusa, Creality K1, Snapmaker Etc..
Features
- 1. [High-Speed Matte PLA 1.75mm] Eryone premium High-Speed Matte filament PLA easy to use, which can better meet the high performance requirements of high-speed 3D printers. Printing Speed 30-400mm/s
- 2. [Wide compatibility] Compatible with most FDM 3D printers, such as: AnkerMake M5, Bambu Lab P1P, Bambu Lab X1 Series, Prusa, Creality K1, snapmaker etc.
- 3.Print Temperature Range: 190??-230??; Bed: 60-70??, Speed 30-400mm/s.
- 4.Vacuumed Sealed Packaging: Sealed vacuum bag to keep it dry and keep out dust;
- 5.Weight and Spool Diameter: Net weight 1kg, shipping weight 1.35kg; spool inner diameter 57mm, spool outer diameter 200mm, height 64mm.
- See more on Amazon...
Brand: ERYONE | Manufacturer: ERYONE TECHNOLOGY HK LIMITED
Dimensions: 2.68 x 7.87 x 7.87 inches | Weight: 2.20 Pounds
See On Amazon #17
Creality PLA Matte Filament 1.75mm 3D Printer Filament,1kg Cardboard Spool(2.2lbs) Dimensional Accuracy +/- 0.03mm, 3D Printing Filament Fits for Most FDM 3D Printers (Black)
Asin: B0BZD6RVBB | Model: CR-PLA Matte New | PartNumber: CR-PLA Matte New
Easy To Remove Support - Designed To Support Itself And Detach Easily, Saving You Time And Hassle When Removing The Support. No Need To Worry About Damaging The Model's Body And Maintain Perfect Details. Novice And Expert Friendly..
Wide Range Of Compatibility - Creality Pla Matte Filament Has A Small Diameter Error And Wide Range Of Compatibility, Fully Compatible With Most Of The Fdm 3D Printers On The Market, Such As Ender 3 S1, Ender 3 Max, Ender 5 S1 And Cr 10..
Eco-Friendly Cardboard Reels - Fully Recyclable Pla Raw Material And Cardboard Packaging Reduces Reel Disposal Costs And Plastic Waste..
Special Anti-Blocking Technology - No Clogging, No Bubbles, No Tangles, Plas Filaments Have Good Layer Adhesion And Are Very Easy To Use.Cr-Pla Matte Filament Has A Softening Temperature Of 140°C And Does Not Soften At The "Cold End" Of The Nozzle, Which Solves The Problem Of Clogging At Its Root..
Matte Surface - For A Superior Printing Experience, The Print Surface Scatters Light To Give It A Matte Surface, Reducing The Visibility Of The Print Layer Lines..
Features
- Filament Specifications - Size: 1 kg (~2.20 lbs) spool, 1.75 mm filament diameter (dimensional accuracy +/- 0.02 mm), Temperature: Recommended extrusion/nozzle temperature 190 C - 230 C (374 F - 446 F)
- Matte Surface - For a superior printing experience, the print surface scatters light to give it a matte surface, reducing the visibility of the print layer lines.
- Easy To Remove Support - Designed to support itself and detach easily, saving you time and hassle when removing the support. No need to worry about damaging the model's body and maintain perfect details. Novice and expert friendly.
- Special Anti-blocking Technology - No clogging, no bubbles, no tangles, PLAs filaments have good layer adhesion and are very easy to use.CR-PLA Matte filament has a softening temperature of 140 C and does not soften at the cold end of the nozzle, which solves the problem of clogging at its root.
- Wide Range Of Compatibility - Creality PLA matte filament has a small diameter error and wide range of compatibility, fully compatible with most of the FDM 3D printers on the market, such as Ender 3 S1, Ender 3 Max, Ender 5 S1 and CR 10.
- Eco-friendly Cardboard Reels - Fully recyclable PLA raw material and cardboard packaging reduces reel disposal costs and plastic waste.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Weight: 2.20 pounds
See On Amazon #18
1.75mm Silk Pearlescent Shiny Black PLA Filament, 1kg 2.2lbs 3D Printing Material, Widely Support for FDM 3D Printer, Pack with Extra Filament Sample by BBLIFE
Asin: B094QG9668 | Model: bbblack | PartNumber: bbblack | Ean: 0736091043700 | UPC: 736091043700
Tangle-Free And Easy To Print: Excellent Production Line Controlled, To Reduce Warpage And Shrinkage, To Make Sure Printing With No-Bubble And No-Jam, It’S Well Wrapped And Tangle-Free, It’S Easy To Print And Smooth Extrusion With Stable Printing Performance.
Satisfaction Warranty: High Quality Guarantee And Premium Customer Services Within 24 Hours Reply. If You Have Any Question With This Filament, Please Kindly Contact Us At Any Time.
Package And Extra Sample Bag: Each Spool Filament Is Packed In A Sealed Vacuum Bag, To Keep It Dry And Maintain Its High Performance For Long Time; Each Filament Packed Together With One Filament Sample Bag.
Widely Support For Fdm 3D Printer: 100% New Raw Material, High Quality Controlled, Mostly Support For All Brand Fdm 3D Printers On Market, High Precise Filament Diameter Tolerance, The Filament Diameter Is Accurate And Consistent.
Features
- Silk Shiny Glossy Surface: The Finished 3D Printing Item with Shiny Silk Smooth Appearance; It s Shiny Eye-popping Glossy Outstanding Print Shiny Surface. Perfect for 3D Design, 3D Craft, 3D Modeling Projects
- Widely Support for FDM 3D Printer: 100% New Raw Material, High Quality Controlled, Mostly Support for All Brand FDM 3D Printers on Market, High Precise Filament Diameter Tolerance, The Filament Diameter is Accurate and Consistent
- Tangle-Free and Easy to Print: Excellent Production Line Controlled, To Reduce Warpage and Shrinkage, To Make Sure Printing with No-Bubble and No-Jam, It s Well Wrapped and Tangle-Free, It s Easy to Print and Smooth Extrusion with Stable Printing Performance
- Package and Extra Sample Bag: Each Spool Filament is Packed in a Sealed Vacuum Bag, To Keep it Dry and Maintain Its High Performance for Long Time; Each Filament Packed Together with One Filament Sample Bag
- Satisfaction Warranty: High Quality Guarantee and Premium Customer Services within 24 Hours Reply. If You Have Any Question with This Filament, Please Kindly Contact Us at ANY TIME
- See more on Amazon...
Brand: Bblife | Manufacturer: BBLIFE
Weight: 2.20 pounds
See On Amazon #19
2.85mm(3mm) PETG Filament 2.85mm, 1kg Strong PETG Black Filament - Polymaker PolyLite PETG 2.85mm Black 3D Printer Filament, Print with 2.85mm Openning 3D Printers Only
Asin: B09LV7ZQ6Z | Model: PB01014 | PartNumber: PB01014 | Ean: 6938936711124
🛠️ 【Good Layer Adhesion & Rigidity】 - No Warping, No Jamming, No Blobs Or Layer Delamination Issues. Polylite Petg Is A Worry-Free 3D Printer Filament Black Which Has Great Bed Adhesion, Very Consistent Color And Dimensional Accuracy.【Note - Turn Off The Fan For The First Layer For Improved Bed Adhesion】.
🛡️ 【Risk Free & Lifetime Technical Support】 - We Offer A Full Refund If The Product Is Not Performing As Expected. This Petg Is Designed To Be An All Rounder 3D Printer Consumables. Let Us Help You Get Your Perfect Beautiful Prints And Contact Us Via Amazon Anytime You Need.
⚙ 【Printing Settings】 - Nozzle: 235˚C; Bed: 70˚C; Speed: 60Mm/S.
♻️ 【Cardboard Spool】 - Comes In Upgraded 3.0 Version Packaging With Fully Recycled Cardboard Spool And Box.
🎁 【Best Gift For Your 3D Printer】 - Polylite Petg Is A High Quality 2.85 Filament Petg And Your 3D Printer Will Love It. Polymaker Black Petg 2.85Mm Filament Is The Ideal Gift For You And Your 3D Printer.
🧵 【Tangle Free & Moisture Free】 - Polylite Petg Is Carefully Winded To Avoid Any Tangling Issues, Dried And Vacuum Sealed In A Resealable Ziplock Bag With Desiccant. Please Make Sure To Never Let Go The Tip Of The Filament As It May Create Nodes. Holes On The Side Of The Spool Can Be Used To Prevent This Issue.
Features
- Good Mechanical and Thermal Properties - More than 12 different colors and effects for your day-to-day creations. PolyLite PETG is designed for your special inventions and strong gadgets. PETG features 80 C (144 F) heat resistance and a higher toughness than regular PLA Selected color: Black PETG filament 2.85mm ( PETG Black Filament )
- Tangle Free & Moisture Free - PolyLite PETG is carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable ziplock bag with desiccant. Please make sure to NEVER let go the tip of the filament as it may create nodes. Holes on the side of the spool can be used to prevent this issue
- Good Layer Adhesion & Rigidity - No warping, no jamming, no blobs or layer delamination issues. PolyLite PETG is a worry-free 3D Printer Filament Black which has great bed adhesion, very consistent color and dimensional accuracy. Note - turn off the fan for the first layer for improved bed adhesion
- Best Gift for your 3D Printer - PolyLite PETG is a high quality 2.85 filament PETG and your 3D Printer will love it. Polymaker Black PETG 2.85mm filament is the ideal gift for you and your 3D Printer
- Printing Settings - Nozzle: 235 C; Bed: 70 C; Speed: 60mm/s
- Cardboard Spool - Comes in upgraded 3.0 version packaging with fully recycled cardboard spool and box
- Risk Free & Lifetime Technical Support - We offer a full refund if the product is not performing as expected. This PETG is designed to be an all rounder 3D Printer Consumables. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need
- See more on Amazon...
Brand: Polymaker | Manufacturer: Polymaker
Dimensions: 1.18 x 1.97 x 5.91 inches | Weight: 2.20 pounds
See On Amazon
Looking For Something Else?
Search