Kuaguozhe Adhesive Car Mount Compatible with Mag Safe Charger - Use Together as Magnetic Phone Car Holder, Car Mount on Vent Dashboard, Compatible with iPhone 14 13 12 Pro Max Plus Mini
Asin: B08R9YX7XQ
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Safe And Steady: The Mount Inserts Into The Air Vent Or Stick To Dash Tightly, Keeping The Holder Stay Steady And Mount Your Iphone 12 Safely Through All Road Bumps And Turns. Vent Clip Comes With Hook And Spring, As Dash Sticker Using Tested Sticky Material To Ensure Security..
Easy Installation : Push Charger Pad Into The Holder, And It Will Hold Tight - No Gel Needed. Use The Hole To Push Charger Out If Needed. Assemble With Vent Mount Or Dash Mount As You Wish, And It’S Easy To Switch To Another Whenever Needed..
Best View: With Two Types Of Mount Inside The Box, You Can Choose The Best Position To Place Your Charger On Dash Or Vent. The Mount Rotates 360 Degree, Providing The Best View When Driving And Charging..
Single-Handed Mount: Put Charger Into The Holder, You Get A Magnetic Car Mount, With Features Coming From The Charger Itself: Get In And Go Without Stopping To Mount Your Iphone 12. The Magnetic Mount Lets You Snap Your Iphone In Place Without Slowing You Down..
Features
- Specially designed to hold Mag safe Charger, perfect match and holding tight (no charger included), convert the charger into magnetic car mount on dash or vent.
- Single-handed Mount: Put charger into the holder, you get a magnetic car mount, with features coming from the charger itself: get in and go without stopping to mount your iPhone 12. The magnetic mount lets you snap your iPhone in place without slowing you down.
- Safe and Steady: The Mount inserts into the air vent or stick to dash tightly, keeping the holder stay steady and mount your iPhone 12 safely through all road bumps and turns. Vent clip comes with hook and spring, as dash sticker using tested sticky material to ensure security.
- Best View: With two types of mount inside the box, you can choose the best position to place your charger on dash or vent. The mount rotates 360 degree, providing the best view when driving and charging.
- Easy Installation : Push Charger pad into the holder, and it will hold tight - no gel needed. Use the hole to push charger out if needed. Assemble with vent mount or dash mount as you wish, and it s easy to switch to another whenever needed.
- See more on Amazon...
Brand: Kuaguozhe | Manufacturer: Kuaguozhe
Weight: 0.09 pounds
See On Amazon Similar To Kuaguozhe Adhesive Car Mount Compatible
#1
volport Sticky Adhesive Replacement for Dashboard Suction Cup Mount, 80mm (3.15") 4pcs 3M VHB Circle Double-Sided Extra Strong Adhesive Sticker Tapes for Dash/Camera/GPS/Ipad/Car Phone Sucker Holders
Asin: B0C5XMG5TT | Ean: 0607569681482 | UPC: 607569681482
[ Very High Bond Stickiness ]: The Adherence Of These Thin Durable 2-Sided Circular Waterproofing Foam Adhesive Stickies Parts Pads Is 40% Stronger Than The Ordinary Glue On The Market. This 3M Double Face Strength Sticky Part Big Adhesive Backing Dot Is Also Waterproof. Multipurpose Tearable Tacky Double Sided Gripping Fixate Anti Gravity Gel Strips Patches Pad For Roadster Mobile Phone Carmount, Furniture，Tiles..
[ Package Includes ]: 4 X 3.15 Inch Wide (80Mm Diameter)3M Heavy Duty Removable Heat Proof Small Double-Stick Sticky Padded Both Side Backed Mat Tape,1 X User Guide. We Provide A One-Year Warranty And If You Need Any Help With Our Product, Please Feel Free To Contact Us And We Will Offer You Our Best After-Sales Service. Your Satisfaction Is Our Priority..
[ Easy To Use ]: This Large Circle 2 Sides Refill Adhesion Tape Replacement Kit Comes With Sweepping Pads To Sweep The Surfaces Before Applying. Just Peel Off The Old Adhesive Stickly Dots Gel From Mount And Sweep The The Surface First, When The Surface Is Dried, Tear Off The 3M Adhesive Film To Stick It To The Bottom Of The Suction Cup Bracket Directly And Press Down Repeatedly For 5-10 Minutes For Better Connecting To The Surface, Then Wait 24 Hours To Use..
[ Genuine 3M Heat Resistant Tile Semi Permanent Sticky Adhesive Sheeting Disc Replacement ]The High Temperature Resistance Performance Of These Suction Cup Adhesive Back For Dash Cam Mount/Stainless Steel Holders/Decorations/Security Camera/Shower Washcloth Holder/Towel Bar/Shower Walls/Motion Sensor Light/Hanger/Picture/Hottub/Kitchen/Sink/Glass Doors/Aluminum Toilet Paper Holders Reaches 120°C+，Even On Hot Summer Days In Texas,You Can Also Use It Safely, No More Worries In Cold Weather, Too..
Features
- [ Designed for Suction Cup Mount] Volport 3M round flat adhesive stickers fit for dashboard suction cup mount cradle,make your sucker stronger.It is also compatible with dash cam, GPS, car cell phone mount, iPad, tablet holder, soap dispenser, bathroom shower caddy / head /shelf /rod/, suction adhesive base/car clips, dashboard pad mounting disk, hook, towel rack/ring, rv, backup camera screen, hanging hooks, ect.You can also cut or trim the two sides sticky tabs to any smaller size you need.
- [ Genuine 3M Heat Resistant Tile Semi Permanent Sticky Adhesive Sheeting Disc Replacement ]The high temperature resistance performance of these suction cup adhesive back for dash cam mount/stainless steel holders/decorations/security camera/shower washcloth holder/towel bar/shower walls/motion sensor light/hanger/picture/hottub/kitchen/sink/glass doors/aluminum toilet paper holders reaches 120 C+ even on hot summer days in Texas,you can also use it safely, no more worries in cold weather, too.
- [ Very High Bond Stickiness ]: The adherence of these thin durable 2-sided circular waterproofing foam adhesive stickies parts pads is 40% stronger than the ordinary glue on the market. This 3M double face strength sticky part big adhesive backing dot is also waterproof. Multipurpose tearable tacky double sided gripping fixate anti gravity gel strips patches pad for roadster mobile phone carmount, furniture tiles.
- [ Easy to Use ]: This large circle 2 sides refill adhesion tape replacement kit comes with sweepping padS to sweep the surfaces before applying. Just peel off the old adhesive stickly dots gel from mount and sweep the the surface first, when the surface is dried, tear off the 3m adhesive film to stick it to the bottom of the suction cup bracket directly and press down repeatedly for 5-10 minutes for better connecting to the surface, then wait 24 HOURS to use.
- [ Package Includes ]: 4 x 3.15 inch wide (80mm diameter)3m heavy duty removable heat proof small double-stick sticky padded both side backed mat tape,1 x user guide. We provide a one-year warranty and if you need any help with our product, please feel free to contact us and we will offer you our best after-sales service. Your satisfaction is our priority.
- See more on Amazon...
Brand: volport | Manufacturer: volport
Dimensions: 0.04 x 3.15 x 3.15 inches
Warranty: Half Year
See On Amazon #2
Kuaguozhe Sticky Magnetic Wall Mount for Magsafe case/Magsafe Wallet/iPhone 15 14 13 12 Pro Max Plus Mini, Adhesive Wall Mount Holder for Magsafe Accessories, Car Mount for Dashboard
Asin: B08VRXNZW9 | Ean: 0791759525318 | UPC: 791759525318
Strong Magnets: Designed As The Official Magnets Array, Coming With One Circle And Orientation Magnets, Powerful Enough To Hold Magsafe Charger And Iphone 12 Pro Max Together ( Does Not Work With Non-Magsafe Case)..
Customer Service: Please Write To Us For Any Questions Or Advice, We Are Tring To Make More Funny Stuff For Magsafe Accessories, Also The Best Products And Service For You. We’D Be Glad To Hear From You, Anytime..
Using Tips: Clean And Dry The Surface Before Stick The Mount, Press For 10 Seconds For Better Sticking. Don’T Use Non-Magsafe Case Or Iphone May Fall Off When Meeting Bumps..
Creative Using: Stick The Magnetic Holder At Kitchen Wall For Cooking, Or Gym Wall For Sports Instruction,Or Night Stand To Hold Magsafe Charger For Charging, Or Key Holders To Hold Wallet... Enjoy More Convenience From Magsafe Feature With Our Magnetic Mount..
Features
- Exclusively made for iPhone 15/14/13/12 Series and Magsafe accessories, not compatible with non-magsafe cases.
- Creative Using: Stick the magnetic holder at kitchen wall for cooking, or gym wall for sports instruction,or night stand to hold magsafe charger for charging, or key holders to hold wallet... Enjoy more convenience from magsafe feature with our magnetic mount.
- Strong Magnets: Designed as the official magnets array, coming with one circle and orientation magnets, powerful enough to hold Magsafe charger and iPhone 12 Pro Max together ( does not work with non-magsafe case).
- Using Tips: Clean and dry the surface before stick the mount, press for 10 seconds for better sticking. Don t use non-magsafe case or iPhone may fall off when meeting bumps.
- Customer Service: Please write to us for any questions or advice, we are tring to make more funny stuff for magsafe accessories, also the best products and service for you. We d be glad to hear from you, anytime.
- See more on Amazon...
Brand: Kuaguozhe | Manufacturer: Kuaguozhe
Dimensions: 0.79 x 1.97 x 1.97 Inches
See On Amazon #3
OHLPRO 3M Vhb Sticky Adhesive Pads Replacement Mount,Car Dashboard Sticker Mount for Magnetic Phone Car Mount,Car Mount Adhesive, 3M Adhesive Pads,Car Mount Sticker Tapes,Ball Diameter 16MM
Asin: B0B2JSTXSV | Ean: 0749666325057 | UPC: 749666325057
【Wide Compatibility】Rectangular 3M Vhb Sticky Adhesive Tape Can Be Used On The Bottom Of The Most Dashboard 360 Degrees Rotation Magnetic Car Phone Mount Holder, Which Is Stable Even In Bumpy Roads. It Is A Strong Sticky Adhesive Replacement For Phone Car Mount. Compatible With Ohlpro, Magjieyx, Xwxelec ,Tikeco ,Pldhpro Etc. Magnetic Phone Car Mount..
【Worry-Free】Comes With Worry-Free Lifetime And Excellent Customer Service..
【Note】(1)Please Don't Stick The 3M Adhesive Pad On Very Soft, Rugged, Texture, Grease Surface Or Leather Surface.(2)Make Sure The Desired Surface Is Clean And Dry.(3)The 3M Vhb Adhesive Pad Is One-Time Use.(4)It Is Recommended To Wait At Least 24 Hours Ensure The Sticker Get The Best Stickiness Before Use..
【Highly Practical】Suitable For Stick Many Kinds Of Material With Flat Hard Surface.It Can Be Used In Home Bathroom Mirror, Refrigerator, Bed Post, Wall, Locker, Office, Driving Personnel And Other Related Equipment Replace..
Features
- Strong Stickness Original 3M Vhb stick adhesive mount,1.55mm thickness red Vhb adhesive pads, stronger than most adhesive pads.This 3M Vhb adhesive pad is high temperature resistance and low temperature resistance, water-proof, Tear off non-trace.
- Highly practical Suitable for stick many kinds of material with flat hard surface.It can be used in home bathroom mirror, refrigerator, bed post, wall, locker, office, driving personnel and other related equipment replace.
- Wide Compatibility Rectangular 3M Vhb sticky adhesive tape can be used on the bottom of the most dashboard 360 degrees Rotation magnetic car phone mount holder, which is stable even in bumpy roads. It is a strong sticky adhesive replacement for phone car mount. Compatible with OHLPRO, MAGJIEYX, XWXELEC ,TIKECO ,PLDHPRO etc. magnetic phone car mount.
- Note (1)Please don't stick the 3M adhesive pad on very soft, rugged, texture, grease surface or leather surface.(2)Make sure the desired surface is clean and dry.(3)The 3M Vhb adhesive pad is one-time use.(4)It is recommended to wait at least 24 hours ensure the sticker get the best stickiness before use.
- Worry-free Comes with worry-free lifetime and excellent customer service.
- See more on Amazon...
Brand: OHLPRO | Manufacturer: OHLPRO
Weight: 0.02 Pounds
See On Amazon #4
PKYAA Sticky Adhesive for Car Mount, Adhesive Replacement Pads for Dashboard Magnetic Phone Holder, 6 Pcs Double-Sided Sticker Pads Compatible with Stick-on Magnetic Car Mount Base
Asin: B07D37Q1RY | Model: PKYAA-002 | PartNumber: PKYAA-002 | Ean: 0662225062913 | UPC: 662225062913
【Easy To Use】First Peel Off The White Side Of The Adhesive And Stick The Adhesive To The Car Phone Mount Base. After Applying Some Pressure On The Adhesive, Peel Off The Red Film Side Of The Adhesive And Stick The Car Phone Mount To Your Car Dashboard. Please Clean The Adhesion Surface When Applying Adhesive Pads. Ensure That The Car Mount Has A Clean Surface To Adhere To So That It Sticks Properly..
【Durability】These Double-Sided Stickers Roll With Pressure Sensitive Adhesive Bonds Almost Instantly With No Drying Time. It Also Resists Heat And Moisture, And Protects Adhesive Surfaces Against Scratches, Easy Peels Off Without Leaving Any Sticky Residue Behind..
【Usability】We Offer Both Permanent And Removable Adhesives That Provide A Secure Bond To The Car Dashboard After Several Hours Or Days Yet Are Initially Removable (For Example To Recover Wrong Positioning) And Allow The Car Mount To Be Removed Without Leaving Adhesive Residue Or Damaging The Surface..
【6 Pcs Adhesive Pads For Dashboard Magnetic Mount】Perfect Size For 95% Stick-On Dashboard Magnetic Phone Car Mount With Rounded Rectangle Base On The Market. Rounded Bulge Is Designed For More Easily Gripping The Liner Edge For Removal. Size: The Length Is 1.97", The Width Is 1.18", And The Thickness Is 0.03"..
Features
- Automotive Grade Adhesive PKYAA automotive mounting industrial grade adhesive successfully bonds car dashboard for permanent and repositionable applications.
- 6 Pcs Adhesive Pads for Dashboard Magnetic Mount Perfect size for 95% stick-on dashboard magnetic phone car mount with rounded rectangle base on the market. Rounded bulge is designed for more easily gripping the liner edge for removal. Size: The length is 1.97, the width is 1.18, and the thickness is 0.03.
- Easy to Use First peel off the white side of the adhesive and stick the adhesive to the car phone mount base. After applying some pressure on the adhesive, peel off the red film side of the adhesive and stick the car phone mount to your car dashboard. Please clean the adhesion surface when applying adhesive pads. Ensure that the car mount has a clean surface to adhere to so that it sticks properly.
- Usability We offer both permanent and removable adhesives that provide a secure bond to the car dashboard after several hours or days yet are initially removable (for example to recover wrong positioning) and allow the car mount to be removed without leaving adhesive residue or damaging the surface.
- Durability These Double-sided stickers roll with pressure sensitive adhesive bonds almost instantly with no drying time. It also resists heat and moisture, and protects adhesive surfaces against scratches, easy peels off without leaving any sticky residue behind.
- See more on Amazon...
Brand: PKYAA | Manufacturer: PKYAA
Dimensions: 0.03 x 1.97 x 1.18 inches | Weight: 0.04 Pounds
See On Amazon #5
6 Pack Adhesives for Suction Cup Mount, AZXYI 53mm(2.09inch) Sticky Adhesive Replacement Kit, Compatible with Car Dashboard Pad Mounting Disk, GPS Dash Cam Suction Cup Mount and Socket Mount
Asin: B08RCJ5489 | Model: AZXYI-6MR | PartNumber: AZXYI-6MR | Ean: 0046432679087 | UPC: 046432679087
【A Great Addition For Wireless Charger】The Strong Adhesion Of These Sticker Pads Help Firmly Lock The Wireless Charger Into The Needed Place, Allow Your Phone Easily Separated From The Charger With One Hand After Charging, And Protect Your Charger From Possible Falling Damage..
【Durability】These Double-Sided Stickers Roll With Pressure Sensitive Adhesive Bonds Almost Instantly With No Drying Time. It Also Resists Heat And Moisture, And Protects Adhesive Surfaces Against Scratches, Easy Peels Off Without Leaving Any Sticky Residue Behind..
【Very High Bond】These High-Strength, Double-Sided Adhesive Pads Let You Quickly And Easily Create A Long-Lasting Bond Attaching Various Surfaces Wherever You Want, Like Car Dashboard, Car Dash, Windshield & Desktop..
【Easy To Use】To Maximize Adhesive Contact, Please Clean The Adhesive Surface Before Use And Let It Dry, Free Of Contaminates. And Wait At Least 24 Hours To Use After Stuck. First Peel Off The White Side Of The Adhesive And Stick It To The Car Mount Base. After Applying Some Pressure On The Adhesive, Peel Off The Red Film Side Of The Adhesive And Stick The Car Mount To Your Car Dashboard Or Windshield..
Features
- 6Pcs Adhesives Replacement for Suction Cup Mount AZXYI offers 6 Pcs round sticky adhesive pads(Diameter: 53mm,2.09") , which can help to fix your Garmin GPS mount, Phone mount, or Dash Cam Suction Cup Mount when your sucker is not strong enough and fall off often. Try AZXYI super adhesive for lock sucker. Never fall again!
- Easy to Use To maximize adhesive contact, please clean the adhesive surface before use and let it dry, free of contaminates. And wait at least 24 hours to use after stuck. First peel off the white side of the adhesive and stick it to the car mount base. After applying some pressure on the adhesive, peel off the red film side of the adhesive and stick the car mount to your car dashboard or windshield.
- A Great Addition for Wireless Charger The strong adhesion of these sticker pads help firmly lock the Wireless Charger into the needed place, allow your phone easily separated from the charger with one hand after charging, and protect your charger from possible falling damage.
- Very High Bond These high-strength, double-sided adhesive pads let you quickly and easily create a long-lasting bond attaching various surfaces wherever you want, like car dashboard, Car Dash, Windshield & Desktop.
- Durability These Double-sided stickers roll with pressure sensitive adhesive bonds almost instantly with no drying time. It also resists heat and moisture, and protects adhesive surfaces against scratches, easy peels off without leaving any sticky residue behind.
- See more on Amazon...
Brand: AZXYI | Manufacturer: AZXYI
Dimensions: 4.72 x 5.91 x 0.39 inches
See On Amazon #6
Kuaguozhe Sticky Magnetic Wall Mount Compatible with MagSafe Mount, Adhesive Wall Mount Holder for iPhone 15 14 13 12 Pro Max Plus Mini - Ultra Thin & Secure
Asin: B093Q2HV29 | Ean: 0791809736633 | UPC: 791809736633
Strong Magnets: Designed As The Official Magnets Array, Coming With One Circle And Orientation Magnets (Does Not Work With Non-Magsafe Case)..
Customer Service: Please Write To Us For Any Questions Or Advice, We Are Tring To Make More Funny Stuff For Magsafe Accessories, Also The Best Products And Service For You. We’D Be Glad To Hear From You, Anytime..
Using Tips: Clean And Dry The Surface Before Stick The Mount, Press For 10 Seconds For Better Sticking. Don’T Use Non-Magsafe Case Or Iphone May Fall Off When Meeting Bumps..
Creative Using: Stick The Magnetic Holder At Kitchen Wall For Cooking, Or Gym Wall For Sports Instruction, Or Key Holders To Hold Wallet... Enjoy More Convenience From Magsafe Feature With Our Magnetic Mount..
Features
- Made for iPhone 13 & iPhone 12 Series and Magsafe accessories, not compatible with non-magsafe cases.
- Creative Using: Stick the magnetic holder at kitchen wall for cooking, or gym wall for sports instruction, or key holders to hold wallet... Enjoy more convenience from magsafe feature with our magnetic mount.
- Strong Magnets: Designed as the official magnets array, coming with one circle and orientation magnets (does not work with non-magsafe case).
- Using Tips: Clean and dry the surface before stick the mount, press for 10 seconds for better sticking. Don t use non-magsafe case or iPhone may fall off when meeting bumps.
- Customer Service: Please write to us for any questions or advice, we are tring to make more funny stuff for magsafe accessories, also the best products and service for you. We d be glad to hear from you, anytime.
- See more on Amazon...
Brand: Kuaguozhe | Manufacturer: Kuaguozhe US
Weight: 0.09 pounds
See On Amazon #7
Exian Car Mount Holder Adhesive Sticky Pad with Magnetic Attachment Black
Asin: B079P9GFYH | Ean: 0055670544705 | UPC: 055670544705
Brand: Camelion | Manufacturer: Exian
See On Amazon
Looking For Something Else?
Search