WSDMAVIS 1 Pcs Lead Acid Battery Charger Module 12V 3A 1-1000AH Lead Acid Accumulator Storage Cell Battery Charger Board for Car Solar Motorcycles
Asin: B08SGMG2S8 | Ean: 0779675959967 | UPC: 779675959967
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Over-Charge Mode. The Over-Charge Is Terminated Once The Charging Current Drops To 38% Of The.Automatically Restarts If The Battery Voltage Falls Below 83.95% Of The Over-Charge Voltage In.Float-Charge Mode. Dd30crta Will Automatically Enter Sleep Mode When Input Voltage Is Lower Than Battery Voltage.Undervoltage Lockout And Status Indication Etc..
Applications To Car Battery Charging,Solar Battery Charging,Mobile Loadspeaker,Lead-Acid Battery Charger,Electric Bicycle Charger,Ups And Standalone Battery Chargers..
Power Supply Voltage :15-25V;Over Charge Voltage Is 14.8V;Float Charge Voltage Is 13.55V;Maximum Charge Current : 3A;Quiescent Current: About 1.8Ma;High Pwm Switching Frequency:300Khz;Operating Ambient Temperature －40℃ To ＋85℃..
In Over-Charge And Float Charge Mode, The Regulation Voltage Is Internally Set. The Constant Charge Current Is Programmable With A Single Sense Resistor.Deeply Discharged Batteries Are Automatically Trickle Charged At 17.5% Of The Programmed.Constant Charge Current Until The Cell Voltage Exceeds 75% Of The Regulation Voltage In.Constant Charge Current, Then Dd30crta Will Enter Float Charge Mode. A New Charge Cycle..
Features
- The DD30CRTA is a PWM switch-mode battery charger controller for 12V lead-acid battery in a small package using few external components.It is specially designed for charging 12V lead-acid battery with trickle charge, constant current charge, over-charge and float charge mode.
- In over-charge and float charge mode, the regulation voltage is internally set. The constant charge current is programmable with a single sense resistor.Deeply discharged batteries are automatically trickle charged at 17.5% of the programmed.Constant charge current until the cell voltage exceeds 75% of the regulation voltage in.Constant charge current, then DD30CRTA will enter float charge mode. A new charge cycle.
- Over-charge mode. The over-charge is terminated once the charging current drops to 38% of the.Automatically restarts if the battery voltage falls below 83.95% of the over-charge voltage in.Float-charge mode. DD30CRTA will automatically enter sleep mode when input voltage is lower than battery voltage.Undervoltage lockout and status indication etc.
- Power supply voltage :15-25V;Over Charge Voltage is 14.8V;Float Charge Voltage is 13.55V;Maximum charge current : 3A;Quiescent current: about 1.8mA;High PWM Switching Frequency:300KHz;Operating Ambient Temperature 40 to 85 .
- Applications to Car battery charging,Solar battery charging,Mobile Loadspeaker,Lead-Acid Battery Charger,Electric Bicycle Charger,UPS and Standalone Battery Chargers.
- See more on Amazon...
Brand: WSDMAVIS | Manufacturer: WSDMAVIS
See On Amazon Similar To WSDMAVIS 1 Pcs Lead Acid
#1
Lead Seal n Stop Lead Encapsulant Coating - Stops and Encapsulates Interior and Exterior Lead Based Paints - Long Term Protection for Your Entire Family - 5 Gallon
Asin: B08WM2NWCZ | Model: DUM-4205 | PartNumber: DUM-4205 | Ean: 0027691042058 | UPC: 027691042058
Lasting Protection On Virtually Any Surface - This Water-Based Formula Is Effective Indoors And Out On Most Painted Surfaces Like Wood, Brick, Metal, Steel, Fiberglass, Stucco, Plaster, And More..
Made In The Usa - Proudly Manufactured In Our Us Facility With High Quality, Globally Sourced Ingredients. Trusted By Diyers And Restoration Professionals. Do It Yourself With Dumond!.
Best Practices - Apply With A Brush. Two Coats May Be Required. For Even Faster Results, Use An Airless Sprayer. Do Not Use In High Friction Areas Or On High-Heat Surfaces..
High Powered Lead Encapsulant - Creates A Durable Elastomeric Barrier Between Lead Dust And You, Preventing Dangerous Lead Particles From Entering The Air And Being Inhaled. Seals Lead Tight!.
Features
- PROTECT YOURSELF & YOUR FAMILY - Lead based paints & coatings can be dangerous when they begin to crack, peel, or when they are sanded or destroyed releasing harmful lead dust into the air.
- HIGH POWERED LEAD ENCAPSULANT - Creates a durable elastomeric barrier between lead dust and you, preventing dangerous lead particles from entering the air and being inhaled. Seals lead tight!
- LASTING PROTECTION ON VIRTUALLY ANY SURFACE - This water-based formula is effective indoors and out on most painted surfaces like wood, brick, metal, steel, fiberglass, stucco, plaster, and more.
- BEST PRACTICES - Apply with a brush. Two coats may be required. For even faster results, use an airless sprayer. Do NOT use in high friction areas or on high-heat surfaces.
- MADE IN THE USA - Proudly manufactured in our US facility with high quality, globally sourced ingredients. Trusted by DIYers and Restoration Professionals. Do it Yourself with Dumond!
- See more on Amazon...
Brand: Dumond | Manufacturer: Dumond
Dimensions: 6.00 x 6.00 x 6.00 inches
See On Amazon #2
WSDMAVIS 1 Pcs Portable 7-16V High Rate Lithium Battery Energy Storage PCB Circuit Board DIY 12V Spot Welder PCB Board for Battery
Asin: B08NVLJJS8 | Ean: 0779675956843 | UPC: 779675956843
The Keys Can Switch Modes, Each Mode Corresponds To Different Welding Time, Led Corresponds To Red / Green / Blue / White / Yellow / Pink / Purple, 7 Modes, The Shortest Red Time And The Largest Purple Welding Time. Long Press To Set The Waiting Time. The Default Is 3 Seconds And The Maximum Can Be Set To 10 Seconds..
Note:18650 Battery Cannot Be Used As Power Supply.Support Farad Capacitor, Aircraft Model High Rate Battery..
Supply Voltage: 12V-16.8V (Capacity X Rate = Must Be Greater Than 150A).Current Requirements: 150A Or More Instantaneous Output (Such As Car Starter Power Supply, 3S Rc High-Power Battery Pack, 20A Lead-Acid Battery With Good Performance Above 20A)..
According To Different Configurations, The Welding Thickness Can Be About 0.1Mm-0.15Mm. By Replacing The Thicker Wire (10 Square), It Can Barely Weld 0.2Mm Thickness.After All, This Device Is Geared Towards Electronics Enthusiasts, And The Frequency Of Use Will Not Be Very High, So It Can Also Use 0.1-0.15 Solder 2 To Replace Thicker Nickel Pieces..
Features
- This circuit with 12V battery will become a storage spot welding machine for lithium battery, nickel-chromium battery and other nickel sheet welding.
- According to different configurations, the welding thickness can be about 0.1MM-0.15mm. By replacing the thicker wire (10 square), it can barely weld 0.2MM thickness.After all, this device is geared towards electronics enthusiasts, and the frequency of use will not be very high, so it can also use 0.1-0.15 solder 2 to replace thicker nickel pieces.
- The keys can switch modes, each mode corresponds to different welding time, LED corresponds to red / green / blue / white / yellow / pink / purple, 7 modes, the shortest red time and the largest purple welding time. Long press to set the waiting time. The default is 3 seconds and the maximum can be set to 10 seconds.
- Supply Voltage: 12V-16.8V (capacity X rate = must be greater than 150A).Current Requirements: 150A or more instantaneous output (such as car starter power supply, 3S RC high-power battery pack, 20A lead-acid battery with good performance above 20A).
- Note:18650 battery cannot be used as power supply.Support Farad capacitor, Aircraft model high rate battery.
- See more on Amazon...
Brand: WSDMAVIS | Manufacturer: WSDMAVIS
See On Amazon
Looking For Something Else?
Search