Z Whip M12 1.5 LS Coolant Temperature Sensor Plug Cylinder Head Temp Water Aluminum Hex Plug Metric Thread LS Swap LS1 LSX LS3 Vortec 5.3L 4.8L 5.7L 6.0L 6.2L LQ4 L76 M12-1.5 M12x1.5
Asin: B08SR9XLXN | Ean: 0810065200716 | UPC: 810065200716
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.This Will Thread Into The Driver Side Of The Cylinder Head Near The Front Or The Passenger Side Cylinder Head Near The Rear..
When You Purchase Z Whip Parts You Will Always Get The Highest Quality For Your Vehicle That You Rightfully Deserve.
We Are An As9100d And Iso 9001:2015 Certified Manufacturer That Produces Aerospace Parts For The Boeing Aircraft Company And The Us Military. Parts We Produce Fly At 30,000 Feet Where Failure Is Not An Option. We Put The Same Quality Into Every Part We Produce..
Billet Aluminum Coolant Temperature Sensor Plug To Plug The Temp Sensor M12x1.5 Threaded Hole In The Cylinder Head.
Features
- Compatible with all LS Series Engines 1997-2014 (GEN. III/IV small block chevy)
- Billet Aluminum Coolant Temperature Sensor Plug to Plug the Temp Sensor M12x1.5 Threaded Hole in The Cylinder Head
- This will thread into the driver side of the cylinder head near the front or the passenger side cylinder head near the rear.
- We are an AS9100D and ISO 9001:2015 Certified Manufacturer that produces aerospace parts for The Boeing Aircraft Company and The US Military. Parts we produce fly at 30,000 feet where failure is not an option. We put the same quality into every part we produce.
- When you purchase Z Whip Parts you will always get the highest quality for your vehicle that you rightfully deserve
- See more on Amazon...
Brand: Z Whip | Manufacturer: Zyxaxis Inc.
Dimensions: 1.00 x 1.00 x 1.00 inches
See On Amazon Similar To Z Whip M12 1.5 LS
#1
RACOONA O2 Sensor Socket,Oxygen Sensor Socket Set,Car Accessories Oxygen Sensor Wrench Remover Tool and Thread Chaser Tool,Automotive O2 Oxygen Sensor Socket for Removing and Install Oxygen Sensors
Asin: B0CFPVBFFK | Model: 800YCGQCXTZ002 | PartNumber: 800YCGQCXTZ002
[Design] Special Side Cut Design Allows For Dismantling Of The Oxygen Sensor While The Wiring Harness Is Still Connected. The Socket Is Offset And Compact, Allowing For Additional Leverage Even In Difficult To Reach Areas..
[Easy To Operate] The Disassembly Tool For The Automotive Oxygen Sensor Socket Wrench And The Thread Clamp Kit Are Easy To Operate. Even If You Don't Have Much Automotive Work Experience, You Can Use This Tool To Replace Your O2 Sensor To Help With Your Car Emissions And Gasoline Mileage. Sensors Live In The Harshest Environments And May Need To Remove Some Elbow Grease. This High-Quality Tool Can Save Your Knuckles And Time!.
[Purpose] The Automotive Oxygen Sensor Sleeve Is Designed Specifically For Use With Ratchets And Circuit Breaker Rods, Used For Removing And Installing Oxygen Sensors And Hexagonal Vacuum Switches On Vehicles..
[High Quality Materials]These Sockets And Wrenches Are Forged From High-Quality Steel, With High Strength And Better Performance. By Phosphating And Electroplating, The Outer Layer Is Protected From Oxidation And Corrosion, Extending Its Service Life And Durability..
Features
- [Package Includes] 1 piece of 3/8 "Dr. ultra deep drawing knife socket (3-1/8" long), 1 piece of 3/8 "Dr. thin crowbar socket wrench (1-1/4" long), 1 piece of 1/2 "Dr. offset crowbar socket wrench (1-15/16" long), and 1 piece of M18 x 1.5mm and 1 piece of M12 x 1.25mm threaded groove with 3/8 "driver for cleaning and repairing damaged threads.
- [High Quality Materials]These sockets and wrenches are forged from high-quality steel, with high strength and better performance. By phosphating and electroplating, the outer layer is protected from oxidation and corrosion, extending its service life and durability.
- [Design] Special side cut design allows for dismantling of the oxygen sensor while the wiring harness is still connected. The socket is offset and compact, allowing for additional leverage even in difficult to reach areas.
- [Purpose] The automotive oxygen sensor sleeve is designed specifically for use with ratchets and circuit breaker rods, used for removing and installing oxygen sensors and hexagonal vacuum switches on vehicles.
- [Easy to Operate] The disassembly tool for the automotive oxygen sensor socket wrench and the thread clamp kit are easy to operate. Even if you don't have much automotive work experience, you can use this tool to replace your O2 sensor to help with your car emissions and gasoline mileage. Sensors live in the harshest environments and may need to remove some elbow grease. This high-quality tool can save your knuckles and time!
- See more on Amazon...
Brand: RACOONA | Manufacturer: RACOONA
See On Amazon #2
Z Whip M12 1.5 To 3/8 NPT LS Extended Length Coolant Temperature Sensor Adapter Mechanical Gauge Switch Metric to SAE Pipe Thread LS Swap LS1 LSX LS3 Vortec 5.3L 4.8L 5.7L 6.0L 6.2L LQ4 L76 M12-1.5
Asin: B08SR5K6LY | Ean: 0810065200679 | UPC: 810065200679
This Will Thread Into The Driver Side Of The Cylinder Head Near The Front Or The Passenger Side Cylinder Head Near The Rear..
When You Purchase Z Whip Parts You Will Always Get The Highest Quality For Your Vehicle That You Rightfully Deserve.
We Are An As9100d And Iso 9001:2015 Certified Manufacturer That Produces Aerospace Parts For The Boeing Aircraft Company And The Us Military. Parts We Produce Fly At 30,000 Feet Where Failure Is Not An Option. We Put The Same Quality Into Every Part We Produce..
Billet Aluminum Coolant Temperature Sensor Adapter Used To Adapt The Factory Ls M12-1.5 Female Coolant Sensor Port To A 3/8” Npt Older Style Mechanical Or Electric Temp Sensor. Normally Used When Swapping An Ls Engine Into Something That Originally Had An Sbc Or Bbc To Retain The Factory Or After Market..
Features
- Extended Length Coolant Adapter for Temp Sensors that need 2 depth for the sensor. Compatible with all LS Series Engines 1997-2014 (GEN. III/IV small block chevy) Adapter has Male M12x1.5 thread and female 3/8 NPT threads (3/8 NPT is approx. 11/16 od).
- Billet Aluminum Coolant Temperature Sensor Adapter used to Adapt the Factory LS M12-1.5 Female Coolant Sensor Port to a 3/8 NPT Older Style Mechanical or Electric Temp sensor. Normally used when swapping an LS engine into something that originally had an SBC or BBC to retain the factory or after market.
- This will thread into the driver side of the cylinder head near the front or the passenger side cylinder head near the rear.
- We are an AS9100D and ISO 9001:2015 Certified Manufacturer that produces aerospace parts for The Boeing Aircraft Company and The US Military. Parts we produce fly at 30,000 feet where failure is not an option. We put the same quality into every part we produce.
- When you purchase Z Whip Parts you will always get the highest quality for your vehicle that you rightfully deserve
- See more on Amazon...
Brand: Z Whip | Manufacturer: Zyxaxis Inc.
Dimensions: 2.75 x 1.00 x 1.00 inches
See On Amazon #3
Z Whip M12 1.5 To 3/8 NPT LS Coolant Temperature Sensor Adapter Mechanical Gauge Switch Metric to SAE Pipe Thread LS Swap LS1 LSX LS3 Vortec 5.3L 4.8L 5.7L 6.0L 6.2L LQ4 L76 M12-1.5 M12x1.5
Asin: B08SR7XDDN | Ean: 0810065200686 | UPC: 810065200686
This Will Thread Into The Driver Side Of The Cylinder Head Near The Front Or The Passenger Side Cylinder Head Near The Rear..
When You Purchase Z Whip Parts You Will Always Get The Highest Quality For Your Vehicle That You Rightfully Deserve.
We Are An As9100d And Iso 9001:2015 Certified Manufacturer That Produces Aerospace Parts For The Boeing Aircraft Company And The Us Military. Parts We Produce Fly At 30,000 Feet Where Failure Is Not An Option. We Put The Same Quality Into Every Part We Produce..
Billet Aluminum Coolant Temperature Sensor Adapter Used To Adapt The Factory Ls M12-1.5 Female Coolant Sensor Port To A 3/8” Npt Older Style Mechanical Or Electric Temp Sensor. Normally Used When Swapping An Ls Engine Into Something That Originally Had An Sbc Or Bbc To Retain The Factory Or After Market..
Features
- Standard Length Coolant Adapter for Temp Sensors that only need 1 depth for the sensor. Compatible with all LS Series Engines 1997-2014 (GEN. III/IV small block chevy) Adapter has Male M12x1.5 thread and female 3/8 NPT threads (3/8 NPT is approx. 11/16 od).
- Billet Aluminum Coolant Temperature Sensor Adapter used to Adapt the Factory LS M12-1.5 Female Coolant Sensor Port to a 3/8 NPT Older Style Mechanical or Electric Temp sensor. Normally used when swapping an LS engine into something that originally had an SBC or BBC to retain the factory or after market.
- This will thread into the driver side of the cylinder head near the front or the passenger side cylinder head near the rear.
- We are an AS9100D and ISO 9001:2015 Certified Manufacturer that produces aerospace parts for The Boeing Aircraft Company and The US Military. Parts we produce fly at 30,000 feet where failure is not an option. We put the same quality into every part we produce.
- When you purchase Z Whip Parts you will always get the highest quality for your vehicle that you rightfully deserve
- See more on Amazon...
Brand: Z Whip | Manufacturer: Zyxaxis Inc.
Dimensions: 1.75 x 1.00 x 1.00 inches
See On Amazon #4
Z Whip M12 1.5 To 1/2 NPT LS Coolant Temperature Sensor Adapter Mechanical Gauge Switch Metric to SAE Pipe Thread LS Swap LS1 LSX LS3 Vortec 5.3L 4.8L 5.7L 6.0L 6.2L LQ4 L76 M12-1.5 M12x1.5
Asin: B08SR87BP7 | Ean: 0810065200709 | UPC: 810065200709
This Will Thread Into The Driver Side Of The Cylinder Head Near The Front Or The Passenger Side Cylinder Head Near The Rear..
When You Purchase Z Whip Parts You Will Always Get The Highest Quality For Your Vehicle That You Rightfully Deserve.
We Are An As9100d And Iso 9001:2015 Certified Manufacturer That Produces Aerospace Parts For The Boeing Aircraft Company And The Us Military. Parts We Produce Fly At 30,000 Feet Where Failure Is Not An Option. We Put The Same Quality Into Every Part We Produce..
Billet Aluminum Coolant Temperature Sensor Adapter Used To Adapt The Factory Ls M12-1.5 Female Coolant Sensor Port To A 1/2” Npt Older Style Mechanical Or Electric Temp Sensor. Normally Used When Swapping An Ls Engine Into Something That Originally Had An Sbc Or Bbc To Retain The Factory Or After Market..
Features
- Coolant Adapter for Temp Sensors that need 1.75 or less depth for the sensor. Compatible with all LS Series Engines 1997-2014 (GEN. III/IV small block chevy) Adapter has Male M12x1.5 thread and female 1/2 NPT threads (1/2 NPT is approx. 27/32 od).
- Billet Aluminum Coolant Temperature Sensor Adapter used to Adapt the Factory LS M12-1.5 Female Coolant Sensor Port to a 1/2 NPT Older Style Mechanical or Electric Temp sensor. Normally used when swapping an LS engine into something that originally had an SBC or BBC to retain the factory or after market.
- This will thread into the driver side of the cylinder head near the front or the passenger side cylinder head near the rear.
- We are an AS9100D and ISO 9001:2015 Certified Manufacturer that produces aerospace parts for The Boeing Aircraft Company and The US Military. Parts we produce fly at 30,000 feet where failure is not an option. We put the same quality into every part we produce.
- When you purchase Z Whip Parts you will always get the highest quality for your vehicle that you rightfully deserve
- See more on Amazon...
Brand: Z Whip | Manufacturer: Zyxaxis Inc.
Dimensions: 2.50 x 1.00 x 1.00 inches
See On Amazon #5
Z Whip M12 1.5 To 1/8 NPT LS Coolant Temperature Sensor Adapter Mechanical Gauge Switch Metric to SAE Pipe Thread LS Swap LS1 LSX LS3 Vortec 5.3L 4.8L 5.7L 6.0L 6.2L LQ4 L76 M12-1.5 M12x1.5
Asin: B08SR9RYGN | Ean: 0810065200693 | UPC: 810065200693
This Will Thread Into The Driver Side Of The Cylinder Head Near The Front Or The Passenger Side Cylinder Head Near The Rear..
When You Purchase Z Whip Parts You Will Always Get The Highest Quality For Your Vehicle That You Rightfully Deserve.
We Are An As9100d And Iso 9001:2015 Certified Manufacturer That Produces Aerospace Parts For The Boeing Aircraft Company And The Us Military. Parts We Produce Fly At 30,000 Feet Where Failure Is Not An Option. We Put The Same Quality Into Every Part We Produce..
Billet Aluminum Coolant Temperature Sensor Adapter Used To Adapt The Factory Ls M12-1.5 Female Coolant Sensor Port To A 1/8” Npt Older Style Mechanical Or Electric Temp Sensor. Normally Used When Swapping An Ls Engine Into Something That Originally Had An Sbc Or Bbc To Retain The Factory Or After Market..
Features
- Coolant Adapter for Temp Sensors that need 1.12 or less depth for the sensor. Compatible with all LS Series Engines 1997-2014 (GEN. III/IV small block chevy) Adapter has Male M12x1.5 thread and female 1/8 NPT threads (1/8 NPT is approx. 13/32 od).
- Billet Aluminum Coolant Temperature Sensor Adapter used to Adapt the Factory LS M12-1.5 Female Coolant Sensor Port to a 1/8 NPT Older Style Mechanical or Electric Temp sensor. Normally used when swapping an LS engine into something that originally had an SBC or BBC to retain the factory or after market.
- This will thread into the driver side of the cylinder head near the front or the passenger side cylinder head near the rear.
- We are an AS9100D and ISO 9001:2015 Certified Manufacturer that produces aerospace parts for The Boeing Aircraft Company and The US Military. Parts we produce fly at 30,000 feet where failure is not an option. We put the same quality into every part we produce.
- When you purchase Z Whip Parts you will always get the highest quality for your vehicle that you rightfully deserve
- See more on Amazon...
Brand: Z Whip | Manufacturer: Zyxaxis Inc.
Dimensions: 1.75 x 0.75 x 0.75 inches
See On Amazon
Looking For Something Else?
Search