AODITECK 240-33 ohms 19"(480mm) Marine Fuel Sending Unit for Boat Truck Car Vehicle Fuel Tank Sending Unit Fuel Level Sending Unit Gas Water Tank Sender Fuel Gauge Sending Unit Water Level Sensor
Asin: B08WPK15H8 | Model: 19C5-U480C | PartNumber: 19C5-U480C | Ean: 0750081816440 | UPC: 750081816440
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.［More Reliable And Quality Construction］All The Aoditeck Fuel Sending Units Are Made With Series Of Highquality Reed Switches And Fixed Resistors. Sae 5 Hole Mounting Pattern, Heavy Duty Sus 316 Stainless Steel And Rugged Construction. Signal Output: 240 Ohms-33 Ohms.
.
［Note］: ① To Allow The Sender Not Hit The Bottom Of The Tank, The Length Of Sender Should Be 1" Less Than The Depth Of The Tank If Tank Is Plastic, And 0.5" Less Than The Depth Of The Tank If Tank Is Metal .
②The Diameter Of Float Is 1.38"(35Mm). If You Have To Drill The Hole, Diameter 1-1/2"(38Mm) Hole Would Be Perfect.
③Aoditeck Sender Is With Non-Linear Output, It Can Only Match With Standard Gauge With Non-Linear Signal.
.
［Easy To Install, Easy Hookup! ］ The Aoditeck Fuel Level Sending Unit Comes With Gasket,Mounting Screws,Well-Written And Illustrated Instructions; The Wiring Instructions Are Straight Forward And Easy To Follow. Takes About 15 Minutes To Install Total, Getting Your Fuel Gauge Working Again.
.
［Aoditeck Fuel Gauge］: You Can Purchase An Aoditeck Fuel Level Gauge In Conjunction With An Aoditeck Sending Unit If Your Boat/Camper Didn’T Have A Fuel Gauge, Both Will Work Great Together.
There Are Several Series Gauge Models At Option.
.
Features
- Great replacement fuel sender The advantage of This doughnut float design type level sender over thick-film swim arm type level Sender is the reed switch's durability and reliability.
Additionally, no moving parts to break. No adjustment needed for tank. It could support fuel level gauge and water Tank Gauge for Boat/RV/Truck.
- AODITECK Fuel Gauge : You can purchase an AODITECK fuel level gauge in conjunction with an AODITECK sending unit If your boat/camper didn t have a fuel gauge, Both Will Work Great Together.
There are several series gauge models at option.
- More Reliable and Quality Construction All the AODITECK Fuel Sending Units are made With series of Highquality reed switches and fixed resistors. SAE 5 hole mounting pattern, heavy duty SUS 316 stainless steel and rugged construction. Signal Output: 240 ohms-33 ohms.
- Easy to Install, Easy Hookup! The AODITECK Fuel Level sending unit comes with gasket,mounting screws,well-written and illustrated instructions; The wiring instructions are straight forward and easy to follow. Takes about 15 minutes to install total, getting your fuel gauge working again.
- Note : to allow the sender not hit the bottom of the tank, the length of sender should be 1 less than the depth of the tank if tank is plastic, and 0.5 less than the depth of the tank if tank is metal .
The Diameter of Float is 1.38(35mm). If You Have to Drill the hole, Diameter 1-1/2(38mm) Hole Would be Perfect.
AODITECK Sender is with Non-Linear Output, It can only match with standard gauge with Non-Linear signal.
- See more on Amazon...
Brand: AODITECK | Manufacturer: Aoditeck Direct
See On Amazon Similar To AODITECK 24033 ohms 19480mm Marine
#1
AODITECK Marine Fuel Sending Unit 19" (240-33 ohms) for Boat Car Truck Bundle Marine Fuel Level Gauge for Boat Vehicle SUV Aftermarket Fuel Gauge 240-33 ohm
Asin: B09F6YGZ9L
3) Fuel Gauge Body Material: Ip67 Waterproof And Dustproof Grade 316 Stainless Steel Bezel Signal: 240 To 33Ohm Indicating Range: Empty To Full, Working Voltage: 9 To 32V Good Readability, Great Visual Contrast On Gauge Face. The Red Backlighting Is Not Too Bright Or Dim, Looks Really Good During The Day But Even Better At Night Lit Up..
5) Takes About 15 Minutes To Install Both Of Them, You Will Know How Much Liquid Left In The Tank..
4) ［Easy To Mount, Convenient To Wire With The Plug ］Mounting Size: 2 1/16 Inch , Or 52Mm The Instructions Is Easy To Follow..
2) 【 Gasket And Mounting Screws Of Boat Fule Sending Unit 】"Easy To Install, Easy Hookup!"
The Fuel Sending Unit Comes With Gasket,Mounting Screws,Well-Written And Illustrated Instructions; The Wiring Instructions Are Straight Forward And Easy To Follow.
Note: To Allow The Sender Not Hit The Bottom Of The Tank, The Length Of Sender Should Be 1" Less Than The Depth Of The Tank If Tank Is Plastic, And 0.5" Less Than The Depth Of The Tank If Tank Is Metal .
.
Features
- 1) AODITECK Fuel Level Sensor is the Direct replacement for Swingarm Sender. The advantage of doughnut float design type level sender over thick-film swim arm type level sender is the reed switch's durability and reliability. Additionally, No Moving Parts to Break. No Adjustment Needed for Tank.SAE 5 Hole Mounting Pattern, Heavy Duty 316 Stainless Steel Signal Output: 240-33 ohms.Wide Application: It Can Support Water/Fuel Level Gauge and for Boat or Auto.
- 2) Gasket and Mounting Screws of Boat Fule Sending Unit Easy to install, easy hookup!
The Fuel sending unit comes with gasket,mounting screws,well-written and illustrated instructions; The wiring instructions are straight forward and easy to follow.
Note: to allow the sender not hit the bottom of the tank, the length of sender should be 1 less than the depth of the tank if tank is plastic, and 0.5 less than the depth of the tank if tank is metal .
- 3) Fuel Gauge Body Material: IP67 waterproof and Dustproof grade 316 Stainless Steel Bezel Signal: 240 to 33ohm Indicating Range: Empty to Full, Working voltage: 9 to 32V GOOD Readability, Great Visual Contrast on Gauge Face. The Red Backlighting is not too Bright or Dim, Looks Really Good during the Day but Even Better at Night lit up.
- 4) Easy to Mount, Convenient to Wire with the Plug Mounting size: 2 1/16 inch , or 52mm The Instructions is Easy to Follow.
- 5) Takes about 15 Minutes to Install Both of Them, You Will know How Much Liquid Left in the Tank.
- See more on Amazon...
Brand: AODITECK
See On Amazon #2
AODITECK Marine Fuel Sending Unit 19" (240-33 ohms) for Boat Car Truck Bundle Marine Fuel Level Gauge for Boat Vehicle SUV Aftermarket Fuel Gauge 240-33 ohm
Asin: B09F29VZV9
3) Fuel Gauge Body Material: Ip67 Waterproof And Dustproof Grade 316 Stainless Steel Bezel Signal: 240 To 33Ohm Indicating Range: Empty To Full, Working Voltage: 9 To 32V Good Readability, Great Visual Contrast On Gauge Face. The Red Backlighting Is Not Too Bright Or Dim, Looks Really Good During The Day But Even Better At Night Lit Up..
5) Takes About 15 Minutes To Install Both Of Them, You Will Know How Much Liquid Left In The Tank..
4) ［Easy To Mount, Convenient To Wire With The Plug ］Mounting Size: 2 1/16 Inch , Or 52Mm The Instructions Is Easy To Follow..
2) 【 Gasket And Mounting Screws Of Boat Fule Sending Unit 】"Easy To Install, Easy Hookup!"
The Fuel Sending Unit Comes With Gasket,Mounting Screws,Well-Written And Illustrated Instructions; The Wiring Instructions Are Straight Forward And Easy To Follow.
Note: To Allow The Sender Not Hit The Bottom Of The Tank, The Length Of Sender Should Be 1" Less Than The Depth Of The Tank If Tank Is Plastic, And 0.5" Less Than The Depth Of The Tank If Tank Is Metal .
.
Features
- 1) AODITECK Fuel Level Sensor is the Direct replacement for Swingarm Sender. The advantage of doughnut float design type level sender over thick-film swim arm type level sender is the reed switch's durability and reliability. Additionally, No Moving Parts to Break. No Adjustment Needed for Tank.SAE 5 Hole Mounting Pattern, Heavy Duty 316 Stainless Steel Signal Output: 240-33 ohms.Wide Application: It Can Support Water/Fuel Level Gauge and for Boat or Auto.
- 2) Gasket and Mounting Screws of Boat Fule Sending Unit Easy to install, easy hookup!
The Fuel sending unit comes with gasket,mounting screws,well-written and illustrated instructions; The wiring instructions are straight forward and easy to follow.
Note: to allow the sender not hit the bottom of the tank, the length of sender should be 1 less than the depth of the tank if tank is plastic, and 0.5 less than the depth of the tank if tank is metal .
- 3) Fuel Gauge Body Material: IP67 waterproof and Dustproof grade 316 Stainless Steel Bezel Signal: 240 to 33ohm Indicating Range: Empty to Full, Working voltage: 9 to 32V GOOD Readability, Great Visual Contrast on Gauge Face. The Red Backlighting is not too Bright or Dim, Looks Really Good during the Day but Even Better at Night lit up.
- 4) Easy to Mount, Convenient to Wire with the Plug Mounting size: 2 1/16 inch , or 52mm The Instructions is Easy to Follow.
- 5) Takes about 15 Minutes to Install Both of Them, You Will know How Much Liquid Left in the Tank.
- See more on Amazon...
Brand: AODITECK
See On Amazon
Looking For Something Else?
Search