BIGTREETECH Direct 6PCS TMC2209 V1.3 Stepper Motor Driver 2.8A UART Ultra Silent Stepsticks Supports Step/DIR Mode for Octopus V1.1/Octopus pro/SKR V1.4 Turbo SKR 3 Manta M4P/M5P/M8P Control Board
Asin: B08WZFK9KT | Model: UUU001793 | PartNumber: UUU001793 | Ean: 0779605800109 | UPC: 779605800109
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.More Cost-Effective: Bigtreetech Tmc2209 V1.3 Stepper Motor Driver Is Compatible With Existing 3D Printer Electronics On The Market, Eliminating The Expensive Cost Of Redesigning. It Can Perfectly Replace The Original Tmc2100 A4988 Drv8825 Lv8729, With Lower Calorific Value..
After-Sales Service: 1-Year Warranty Is 100% Guaranteed. If You Have Any Questions About This 6Pcs Tmc2209 V1.3 Driver, You Can Contact Us At Any Time Through Amazon, And We Will Give You A Satisfactory Answer..
Terrific Performances:Featured With Rdson Value Of 0.2A, Btt Tmc2209 Uart Stepper Drivers Have Lower Resistance Conducting Output Drivers, Which Provides Them With Less Power Dissipation And Higher Current. The Spreadcycle Provides High-Precision Cycle-By-Cycle Current Control For Highest Dynamic Movements..
Ultra-Silent: The Stealthchop2 Allows For No-Noise, High-Precision Chopper Algorithm For Inaudible Motion And Inaudible Standstill Of The Motor, Making It Super Quiet During Printing. And The Flexible Microplyer Interpolation Unit Provides Up To 256 Subdivisions, Which Can Achieve Perfect Sinusoidal Control Even In Systems With Limited Pulse Frequency..
Features
- Pack of 6 : Comes in 6PCS BTT TMC2209 stepper motor drivers and heatsink. Thanks to the StealthChop2, TMC2209 drirver serves as ultra-quiet stepper motor driver with with a continuous current of up to 2.0A (with peaks of 2.8A). Voltage ranges from 5.5V to the maximun output of 28V.
- Ultra-Silent: The StealthChop2 allows for no-noise, high-precision chopper algorithm for inaudible motion and inaudible standstill of the motor, making it super quiet during printing. And the flexible microPlyer interpolation unit provides up to 256 subdivisions, which can achieve perfect sinusoidal control even in systems with limited pulse frequency.
- More Cost-effective: BIGTREETECH TMC2209 V1.3 stepper motor driver is compatible with existing 3D printer electronics on the market, eliminating the expensive cost of redesigning. It can perfectly replace the original TMC2100 A4988 DRV8825 LV8729, with lower calorific value.
- Terrific Performances:Featured with RDSon value of 0.2A, BTT TMC2209 uart stepper drivers have lower resistance conducting output drivers, which provides them with less power dissipation and higher current. The Spreadcycle provides high-precision cycle-by-cycle current control for highest dynamic movements.
- After-sales Service: 1-Year warranty is 100% guaranteed. If you have any questions about this 6PCS TMC2209 V1.3 driver, you can contact us at any time through Amazon, and we will give you a satisfactory answer.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH DIRECT
See On Amazon Similar To BIGTREETECH Direct 6PCS TMC2209 V1.3
#1
BIGTREETECH Octopus V1.1 Control Board 32bit Compatible TFT Series Screen, Support DIY Klipper Firmware and Raspberry-Pi Online Printing for Voron V2.4 Upgrade 3D Printer (with 8Pcs TMC2209)
Asin: B09713SRVP | Model: KINGPRINTER-UUU001949 | PartNumber: KINGPRINTER-UUU001949
🐙【Motherboard Expansion Function】Support Bltouch, Locked-Rotor Detection, Shutdown After Printing, Resume Printing After Power Failure, Can Bus, U Disk Function, Iic Expansion; At The Same Time Reserved Wifi Interface, Pt100 Thermistor Interface (Optional), Dual Z-Axis Printer..
🐙【Tmc2209 Driver Mode】Tmc Motor Drivers Can Be Used In Spi Or Uart Mode By Simply Adjusting The Onboard Jumpers Beneath Each Motor Driver. Additionally You Can Connect Or Disconnect The Tmc Diag Pin Using An Onboard Jumper Allowing You To Use Hard Endstops Or Sensorless Homing Without The Need To Cut Any Pins..
🐙【Tmc2209 Driver Features】The Tmc2209 Stepper Driver Is Not Easy To Lose Steps And Is In An Ultra-Quiet Mode; The Module Has A Large Area Of Heat Dissipation Pad, Which Can Reduce The Temperature Of The Driver When It Is Working; The Module Supports Three Modes: Step / Dir And Uart..
🐙【Strong Diy Support】This Motherboard Supports Up To 8 Stepper Drivers With 9 Stepper Driver Outputs In Total; And Up To 6 Pwm Fans And 2 Always-On Fans With The Ability To Individually Select The Voltage Rail That Will Drive Each Fan. Select From Vin, 12V Or 5V..
Features
- Main Control Chip Uses a 32-bit ARM Cortex-M4 series STM32F446ZET6 main control chip with a core frequency of 180MHz.
- Strong DIY Support This motherboard supports up to 8 stepper drivers with 9 stepper driver outputs in total; And up to 6 PWM fans and 2 always-on fans with the ability to individually select the voltage rail that will drive each fan. Select from Vin, 12V or 5V.
- Motherboard Expansion Function Support BLTouch, locked-rotor detection, shutdown after printing, resume printing after power failure, CAN bus, U disk function, IIC expansion; at the same time reserved WIFI interface, PT100 thermistor interface (optional), dual Z-axis printer.
- TMC2209 Driver Features The TMC2209 stepper driver is not easy to lose steps and is in an ultra-quiet mode; the module has a large area of heat dissipation pad, which can reduce the temperature of the driver when it is working; the module supports three modes: STEP / DIR and UART.
- TMC2209 Driver Mode TMC Motor drivers can be used in SPI or UART mode by simply adjusting the onboard jumpers beneath each motor driver. Additionally you can connect or disconnect the TMC DIAG pin using an onboard jumper allowing you to use hard endstops or sensorless homing without the need to cut any pins.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #2
BIGTREETECH SKR Mini E3 V2.0 New Upgrade Control Board 32-Bit with TMC2209 UART Driver 3D Printer Parts Cheetah for Creality Ender 3
Asin: B09HT282FD | Model: ZZB000534-KINGPRINTER | PartNumber: ZZB000534-KINGPRINTER
⭐【Hot-Bed Mosfet】The Hot Bed Mos Tube Uses Wsk220n04, Low On-Resistance, Larger Heat Dissipation Area, And Reduce Heat Generation..
⭐【After-Sales Support】If You Encounter Any Problems, Please Contact Us Via Amazon As Soon As Possible. We Have Professional Technical After-Sales Personnel To Solve Your Problems;.
⭐【Upgrade Features】Support Bltouch, Filament Detection, Power-Off Resume, Automatic Shutdown, Etc .; Increase The Distance Between The Driving Chip And The Components To Avoid The Trouble Caused By The Heat Sink;.
⭐【Cnc Fan】Because The Fan On The Skr Mini E3 V2.0 Control Board Is A Cnc Fan, You Need To Set The Wind Speed Before Using It. (Note: V2.0 Version Of The Fan Is Not Ready To Use After Power On)..
Features
- Main Control Chip Features This SKR Mini E3 V2.0 motherboard uses the STM32F103RCT6 main control chip, and its flash memory size is 256K.
- CNC Fan Because the fan on the SKR Mini E3 V2.0 control board is a CNC fan, you need to set the wind speed before using it. (Note: V2.0 version of the fan is not ready to use after power on).
- Hot-bed Mosfet The hot bed MOS tube uses WSK220N04, low on-resistance, larger heat dissipation area, and reduce heat generation.
- Upgrade Features Support BLtouch, filament detection, power-off resume, automatic shutdown, etc .; Increase the distance between the driving chip and the components to avoid the trouble caused by the heat sink;
- After-sales Support If you encounter any problems, please contact us via Amazon as soon as possible. We have professional technical after-sales personnel to solve your problems;
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #3
BIGTREETECH SKR Mini E3 V3.0 Control Board with TMC2209 UART Upgrade 32Bit 3D Printer Silent Board for Ender 3, Ender3 Pro, Ender-3 V2 (with BIQU MicroProbe V2 + Ender-3 Mounting Bracket)
Asin: B0CFL6P6MC | Model: KINGPRINTER-1033346 | PartNumber: KINGPRINTER-1033346
Skr Mini E3 Silent Board Is A Four Axis Motherboard Specifically Designed For Ender-3 Players. It Adds Cnc Fans For Overall Heat Dissipation And Upgrades Heat Sink, Effectively Improving Heat Dissipation Performance..
Biqu Microprobe Is Only 6G, And Its Smaller Size Enhances The Compatibility Of Microprobe Installation Positions, Allowing For Better Installation In Some Compact Positions On Extruder; With A Lifespan Of 10000000+, Microprobe Will Be A Durable Upgrade For Your Printer..
Biqu Microprobe V2 Uses 5V Power Supply, The Control Signal Is Compatible With 3.3V/5V. The Detection Signal Is An Open-Drain Output Externally (10K Pull-Up Resistance Is Required On The Signal Of The Motherboard, Or The Io Needs To Be Set As Input Pull-Up In The Firmware)..
Bigtreetech Skr Mini E3 V3.0 Adopts Stmicroelectronics' Latest G0 Series Main Control Chip Stm32g0b1ret6; It Is Equipped With Tmc2209 Mute Driven Uart Mode On Board And Supports Mute Printing..
Features
- The kit includes BIGTREETECH SKR Mini E3 V3.0 silent control board and BIQU MicroProbe V2 auto leveling sensor, and ender-3 extruder bracket, perfect for Ender-3 and Ender-3 V2 3D printers.
- BIGTREETECH SKR Mini E3 V3.0 adopts STMicroelectronics' latest G0 series main control chip STM32G0B1RET6; It is equipped with TMC2209 mute driven UART mode on board and supports mute printing.
- SKR Mini E3 silent Board is a four axis motherboard specifically designed for Ender-3 players. It adds CNC fans for overall heat dissipation and upgrades heat sink, effectively improving heat dissipation performance.
- BIQU MicroProbe V2 uses 5V power supply, the control signal is compatible with 3.3V/5V. The detection signal is an open-drain output externally (10K pull-up resistance is required on the signal of the motherboard, or the IO needs to be set as input pull-up in the firmware).
- BIQU MicroProbe is only 6g, and its smaller size enhances the compatibility of MicroProbe installation positions, allowing for better installation in some compact positions on extruder; With a lifespan of 10000000+, MicroProbe will be a durable upgrade for your printer.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #4
BIGTREETECH TFT35 E3 V3.0.1 Graphic Smart Display Panel Board for Ender 3 Compatible with SKR Mini E3 V3.0, SKR 3/EZ, Octopus/Pro/Max EZ, Kraken, SKR Pro V1.2 Control Board
Asin: B08182XHZZ | Model: TFT35 E3 V3.0.1 | PartNumber: TFT35 E3 V3.0.1 | Ean: 0778601688131 | UPC: 778601688131
3）Reserve Wifi Port, And Wifi Function Is Realized By External Wifi Module；Reserve The Extension Port Of Filament Breaking Detection (Fil-Det)；.
5）Lcd12864 Mode Uses Exp1, Exp2 And Exp3. Exp1 And Exp2 Are Lcd Screen Ports Of Normal Motherboard. Exp3 Is The Lcd Interface Used By E3 Series Motherboard (Such As Skr Mini E3 V1.2, Skr E3 Dip V1.1, Etc.).
4）Reserve The Extension Port Of Automatic Shutdown After Printing (Ps-On);.
2）This Display Board Has Higher Compatibility. Users Can Select Two Work Modes:Uart Serial Port Screen Mode And 12864 Screen Mode;Serial Port Screen Mode Supports Two Printing Modes: Sd Card And U Disk..
Features
- 1 ARM Cortex-M3 series GD32F205VCT6 chip with 32-bit CPU 120MHz; Upgrade the firmware by SD card. It is easy and convenient to operate.
- 2 This display board has higher compatibility. Users can select two work modes:UART serial port screen mode and 12864 screen mode;Serial port screen mode supports two printing modes: SD card and U disk.
- 3 Reserve WIFI port, and WIFI function is realized by external WIFI module Reserve the extension port of filament breaking detection (FIL-DET)
- 4 Reserve the extension port of automatic shutdown after printing (PS-ON);
- 5 LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used by E3 series motherboard (such as SKR MINI E3 V1.2, SKR E3 DIP V1.1, etc.)
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #5
BIGTREETECH New Upgrade EZ2209 Stepper Motor Driver with EZ-Driver Connection V1.0 Support UART Mode for SKR V1.4 Turbo, SKR 2, SKR 3 SKR Pro V1.2, Octopus, Octopus Pro 3D Controller Board (5 Sets)
Asin: B0B1WRDVWZ | Model: KINGPRINTER-1010861 | PartNumber: KINGPRINTER-1010861
✨Support Stealthchop, Which Can Realize The Mute Lock Of The Motor And The Mute When Running At Low Speed. It Is Recommended To Select When The Maximum Speed Of The Motor Is Lower Than 300Rpm..
✨Support Stallguard2: When There Is No Limit Switch, It Can Be Used For Motor Stall Detection (Limit Switch Is Recommended)..
✨Supports Spreadcycle, Which Can Achieve Mute And Low Power Consumption In A Wide Range Of Speed And Torque. It Is Recommended To Select When The Maximum Speed Of The Motor Exceeds 300Rpm..
✨The Newly Developed Board Frame Is Used To Match The New Connector To Improve The User Experience. Using A New Customized Heat Sink, While Enhancing The Heat Dissipation Capacity, It Protects The Driver Chip From External Damage..
Features
- Why use EZ Drivers? Because 40% of users have damaged the driver due to the wrong installation. It will damage the control board or even more damage. Using EZ Drivers can improve the experience of more users.
- The newly developed board frame is used to match the new connector to improve the user experience. Using a new customized heat sink, while enhancing the heat dissipation capacity, it protects the driver chip from external damage.
- Support StealthChop, which can realize the mute lock of the motor and the mute when running at low speed. It is recommended to select when the maximum speed of the motor is lower than 300RPM.
- Supports SpreadCycle, which can achieve mute and low power consumption in a wide range of speed and torque. It is recommended to select when the maximum speed of the motor exceeds 300RPM.
- Support StallGuard2: when there is no limit switch, it can be used for motor stall detection (limit switch is recommended).
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
See On Amazon #6
BIGTREETECH TMC2208 V3.0 UART Stepper Motor Driver with Heatsink Reprap TMC2209 for BTT Octopus V1.1/SKR 3/SKR V1.4 Turbo Manta M4P/M5P/M8P MKS Gen L 3D Printer Motherboard (5pcs)
Asin: B081DKSRB5 | Model: TMC2208 V3.0 UART | PartNumber: TMC2208 V3.0 UART | Ean: 0787794452450 | UPC: 787794452450
【Terrfic Thermal Performances】:Thanks To The Immersional Gold Finishing, Bigtreetech Tmc 2208 Stepper Driver Generates 30% Lower Heats Compared With Tmc2208 Of Other Brands On Market. With Much Better Thermal Dissipation And Cooling Performance, It Means More Heavy Duty And Longer Life Of The Driver Motor..
【100% Satisfying Customers Services】: You Could Search Bigtreetech At Github, Or You Could Send Message To Us Directly On Amazon. Our Professional Tech Supports Team Are Willing To Help You When You Need..
【Uart Mode】:This Btt Tmc2208 V3.0 Uart Mode Stepper Motor Driver Comes In Uart Mode Which Can Be Used On Control Boards By Setting Jumper Caps, No Extra Wielding Requirements, Making It Flexible To Use Without Redesign Or Make Software Or Hardware Changes..
【Smooth Operation】:Incorporated The Spreadcycle Technology, Bigtreetech Tmc2208 Stepper Driver Is Controlled By The Pwm Chopper Moder, Which Effectively Avoids Losing Steps Or Jittering..
Features
- Ultra-quiet Movements : Featured with StealthChop2, tmc2208 stepper motor driver is an extremely quiet motor driver for two-phase stepper motors, which enables softer and even quieter movements.The continuous drive current is 1.2A and the peak current is 2A, voltage range 4.75V-36V, 256 subdivisions.
- Smooth Operation :Incorporated the Spreadcycle technology, BIGTREETECH TMC2208 stepper driver is controlled by the PWM chopper moder, which effectively avoids losing steps or jittering.
- Terrfic Thermal Performances :Thanks to the immersional gold finishing, BIGTREETECH tmc 2208 stepper driver generates 30% lower heats compared with TMC2208 of other brands on market. With much better thermal dissipation and cooling performance, it means more heavy duty and longer life of the driver motor.
- UART Mode :This BTT tmc2208 v3.0 uart mode stepper motor driver comes in UART mode which can be used on control boards by setting jumper caps, no extra wielding requirements, making it flexible to use without redesign or make software or hardware changes.
- 100% Satisfying Customers Services : You could search BIGTREETECH at GitHub, or you could send message to us directly on Amazon. Our professional tech supports team are willing to help you when you need.
- See more on Amazon...
Brand: BIGTREETECH Direct | Manufacturer: BIGTREETECH Direct
See On Amazon #7
BIGTREETECH Octopus V1.1 32bit Control Board + TFT35 E3 V3.0.1 Touch Screen Display + 8xTMC2209 V1.3 Stepper Motor Driver DIY for Voron V2.4 3D Printer Controller Board Support Klipper Raspberry Pi
Asin: B09RWRBH47 | Model: 1060000524 | PartNumber: 1060000524
⭐Multi-Function Display: Tft35 E3 V3.0.1 Touch Screen Has Higher Compatibility. You Can Choose Two Working Modes: Uart Serial Screen Mode And 12864 Screen Mode. The Wifi Port Is Reserved, And The Wifi Function Is Implemented By An External Wifi Module.Sd Card Update Firmware Is Simple And Convenient, Download From Our Github, Copy And Save To Sd Card.
⭐Worry-Free After-Sales Service: Do You Have Any Questions? Or If You Have Any Problems That Need To Be Solved, Please Feel Free To Contact Us, And We Will Arrange The Most Professional Technical Team To Solve It For You Until You Are Satisfied..
⭐Ultra-Quiet Driver: Tmc2209 V1.3 With Spreadcycle Technology, Enables High Precision Cycle-By-Cycle Current Control For The Highest Dynamic Motion. Large Area Thermal Pad To Reduce The Temperature Of The Drive During Operation. The Motor Is Difficult To Lose Step. Can Prevent Motor Vibration. The Module Supports Step/Dir And Uart Modes..
⭐Super Multi-Function Control Panel: Support Material Interruption Detection, Continuous Printing After Power Failure, Shutdown After Printing, Bl_Touch, Support Online Printing, Etc. Upgrading The Configuration Firmware Through The Sd Card, The Operation Is Simple, Convenient And Efficient. Using High-Performance Mosfet, The Heat Dissipation Effect Is Better..
Features
- SUPER PERFORMANCE CHIP: BIGTREETECH Octopus control adopts 32-bit ARM-level Cortex-M4 series STM32F446ZET6 chip with a frequency of up to 180MHz, and supports 8 stepper motors. Equipped with highly modular open source firmware Marlin2.0, which greatly improves the overall performance of the motherboard, and all the functions of the motherboard do not require any expansion modules, and supports running Klipper and Marlin firmware
- SUPER MULTI-FUNCTION CONTROL PANEL: Support material interruption detection, continuous printing after power failure, shutdown after printing, BL_Touch, support online printing, etc. Upgrading the configuration firmware through the SD card, the operation is simple, convenient and efficient. Using high-performance MOSFET, the heat dissipation effect is better.
- MULTI-FUNCTION DISPLAY: TFT35 E3 V3.0.1 touch screen has higher compatibility. You can choose two working modes: UART serial screen mode and 12864 screen mode. The WIFI port is reserved, and the WIFI function is implemented by an external WIFI module.SD card update firmware is simple and convenient, download from our github, copy and save to SD card
- ULTRA-QUIET DRIVER: TMC2209 v1.3 with SpreadCycle technology, enables high precision cycle-by-cycle current control for the highest dynamic motion. Large area thermal pad to reduce the temperature of the drive during operation. The motor is difficult to lose step. Can prevent motor vibration. The module supports STEP/DIR and UART modes.
- WORRY-FREE AFTER-SALES SERVICE: Do you have any questions? Or if you have any problems that need to be solved, please feel free to contact us, and we will arrange the most professional technical team to solve it for you until you are satisfied.
- See more on Amazon...
Brand: BIQU | Manufacturer: BIGTREETECH
See On Amazon #8
BIGTREETECH Diect SKR Mini E3 V2.0 32bit Control Board + TFT35 E3 V3.0.1 Touch Screen Compatible with TFT35 12864LCD Display WiFi 3D Printer Parts
Asin: B081DHW839 | Model: ZZB000318+ZZB000378 | PartNumber: ZZB000318+ZZB000378 | Ean: 0787794452429 | UPC: 787794452429
🍀【Tft35 E3 V3.0 Main Chip】：Arm Cortex-M3 Series Stm32f207vct6 Chip With 32-Bit Cpu 120Mhz;.
🍀【 Skr Mini V2.0+Tft35 E3 V3.0 Firmware】：Please Search Bigtreetech At Github.
🍀【Tft35 E3 V3.0 Wiring Method】：Lcd12864 Mode Uses Exp1, Exp2 And Exp3. Exp1 And Exp2 Are Lcd Screen Ports Of Normal Motherboard. Exp3 Is The Lcd Interface Used By E3 Series Motherboard (Such As Skr Mini E3 V1.2, Skr E3 Dip V1.1, Etc.).
🍀【 Skr Mini V2.0 Stepper Motor】: Integration Of Tmc2209 Uart Mode (If You Have Any Questions Within Using,Pls Contact Us Through Amazon, We Will Get Back To You Within 24 Hours).
Features
- SKR MINI V2.0 : Update from SKR MINI E3 V1.2, It's perfect upgade of Ender 3 3D printer motherboard. And the main control chip is STM32F103RCT6 of SKR MINI E3 V2.0.
- SKR MINI V2.0 Stepper motor : Integration of TMC2209 UART Mode (If you have any questions within using,pls contact us through Amazon, we will get back to you within 24 hours)
- TFT35 E3 V3.0 Main Chip ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz;
- TFT35 E3 V3.0 Wiring Method LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used by E3 series motherboard (such as SKR MINI E3 V1.2, SKR E3 DIP V1.1, etc.)
- SKR MINI V2.0+TFT35 E3 V3.0 Firmware Please search BIGTREETECH at GitHub
- See more on Amazon...
Brand: BIGTREETECH Direct | Manufacturer: BIGTREETECH Direct
See On Amazon #9
BTT TMC2209 V1.3 3D Printer Stepper Motor Driver with Heat Sink for 3D Printer Controller Mother Boards SKR 2/BTT Octopus/SKR V1.4 Turbo for Ender 3/Ender 3 Pro/Mega S 3D Printers
Asin: B09SCYCFM5 | Model: 5 | PartNumber: 5
Features
- TMC2209 v1.3 is an ultra-quiet two-phase stepper motor driver chip, UART mode, continuous drive current 2.0A, peak current 2.8A, voltage range 5.5V-28V, 256 subdivisions. The flexible microPlyer interpolation unit provides up to 256 subdivisions, enabling perfect sinusoidal control even in systems with limited pulse frequencies; these are also widely used in 3D printing because of the stealthChop2 ultra-quiet technology.
- See more on Amazon...
Brand: Ickiya | Manufacturer: BTT/BIGTREETECH
See On Amazon #10
BIGTREETECH Octopus V1.1 Control Board+BTT SFS V2.0 Smart Filament Sensor + 8Pcs TMC2209 V1.3 Stepper Motor Driver Kit Support Klipper for Voron2.4 CoreXY / I3 VZbot 3D Printer DIY Upgraded Kit
Asin: B0CJTRC58V
✅【High Precise】Bigtreetech Sfs V2.0 Smart Filament Sensor Adopts High Precise Photoelectric Induction Technology, More Accurate Detection,Detection Length 2.88Mm, Upgrade Of Bi-Directional Feeding,Unlimited By The Installation Direction Of Filament, Easy Installation And Flexible..
✅8Pcs Tmc2209: Comes In 8Pcs Btt Tmc2209 V1.3 Stepper Motor Drivers And Heatsink. Thanks To The Stealthchop2, Tmc2209 Serves As Ultra-Quiet Stepper Motor Driver With With A Continuous Current Of Up To 2.0A (With Peaks Of 2.8A).Voltage Ranges From 5.5V To The Maximun Output Of 28V..
❤️【100% Satisfying Customer Services】If You Have Any Problems During Use, Please Contact Us At The First Time. We Have Professional After Sales Enginner, We Will Give You A Satisfactory Solution..
✅【Real Time Status Light Indication】Btt Smart Filament Runout Sensor V2.0 Upon Detecting Nozzle Clogging, Filament Runout, Filament Tying, And Extruder Malfunctions, Filament Runs Out Or Is Broken, Sfs V2.0 Will Provide Corresponding Lights For Different Issues And Issue Error Alarms On The Screen In A Timely Manner And Automatically Pauses Printing,Save Resources..
🐙【Powerful Function】Btt Octopus V1.1 Control Board Offers Up To 6 Controllable Pwm Fans And Additional 2 Without Control With The Possibility Of Voltage Selection From 5V, 12V Or 24V. Support Can Bus Connectivity Using An Ethernet Connector And Firmware Update By Usb (Recommended) And Dfu Mode(Advanced Users). Updating Via Dfu Mode Is To Send Firmware To The Board Directly From Pc With No Need For Bootloader..
Features
- Main Control Chip BIGTREETECH Octopus V1.1 motherboard adoptes ARM Cortex-M4 series STM32F446ZET6 32-bit microcontroller at 180MHz with 512Kb flash. Support 8 axis and running Klipper and Marlin. Notice: Input voltage only supports 24V, 12V is not allowed.
- Powerful Function BTT Octopus V1.1 control board offers up to 6 controllable PWM fans and additional 2 without control with the possibility of voltage selection from 5V, 12V or 24V. support CAN Bus connectivity using an ethernet connector and firmware update by USB (recommended) and DFU mode(advanced users). Updating via DFU mode is to send firmware to the board directly from PC with no need for bootloader.
- High Precise BIGTREETECH SFS V2.0 smart filament sensor adopts high precise photoelectric induction technology, more accurate detection,detection length 2.88mm, upgrade of Bi-Directional feeding,unlimited by the installation direction of filament, easy installation and flexible.
- Real Time Status Light indication BTT smart Filament runout sensor v2.0 upon detecting nozzle clogging, filament runout, filament tying, and extruder malfunctions, Filament Runs out or is broken, SFS V2.0 will provide corresponding lights for different issues and issue error alarms on the screen in a timely manner and automatically pauses printing,save resources.
- 8Pcs TMC2209: Comes in 8Pcs BTT TMC2209 V1.3 stepper motor drivers and heatsink. Thanks to the StealthChop2, TMC2209 serves as ultra-quiet stepper motor driver with with a continuous current of up to 2.0A (with peaks of 2.8A).Voltage ranges from 5.5V to the maximun output of 28V.
- 100% Satisfying Customer Services If you have any problems during use, please contact us at the first time. We have professional after sales enginner, we will give you a satisfactory solution.
- See more on Amazon...
Brand: BIGTREETECH | Manufacturer: BIGTREETECH
Dimensions: 0.04 x 5.91 x 3.91 inches
See On Amazon
Looking For Something Else?
Search