Dorhea 4Pcs Digital 38khz Ir Receiver Sensor Module + 4Pcs 38khz Ir Transmitter Sensor Module Kit for Electronic Building Block
Asin: B08X2MFS6S | Model: 13658-1 | PartNumber: 13658-1 | Ean: 0701715461482 | UPC: 701715461482
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.With The Emission Signal Indicator Led, Easy To Observe And Debug..
Widely Used In Infrared Communication, Infrared Remote Control, Apply To A Variety Of Platforms Including For Raspberry Pi/51/Avr/Arm..
Can Be Used For Remoter Control,Can Be Compatible With Wrobot Digital 38Khz Ir Transmitter Sensor..
Adopt 1838 Remote Control Receiver With High Sensitivity..
Features
- The infrared transmitter module is directly transmitted by a single tube, and the waveform needs to be modulated by the program.
- Adopt 1838 remote control receiver with high sensitivity.
- with the emission signal indicator LED, easy to observe and debug.
- Can be used for remoter control,Can be compatible with wrobot digital 38KHz IR transmitter sensor.
- Widely used in infrared communication, infrared remote control, apply to a variety of platforms including for Raspberry pi/51/AVR/ARM.
- See more on Amazon...
Brand: DORHEA | Manufacturer: DORHEA
See On Amazon Similar To Dorhea 4Pcs Digital 38khz Ir
#1
Gikfun Infrared Diode Led IR Emission and Receiver for Arduino (Pack of 10 Pairs) EK8460
Asin: B06XYNDRGF | Model: 4328462662 | PartNumber: 4328462662 | Ean: 0728821645193 | UPC: 728821645193
The Infrared Diode's Pin Is Not Easy To Be Oxidized, It Is Easy To Be Tinned, And The Solderability Is Good;.
Suitable For Infrared Products Such As Electronic Toy Remote Control, Infrared Camera, Infrared Temperature Measurement, Etc..
Long Service Life, No Red Storm, High Reliability.
The Ir Receiver Is A Small Design With A Built-In Dedicated Ic That Is Highly Resistant To Interference And Can Withstand Environmental Interference..
Features
- 10PCS VS1838B Infrared receiver and 10PCS 5mm 940nm IR infrared Emission Tube LED Lamp
- The ir receiver is a small design with a built-in dedicated IC that is highly resistant to interference and can withstand environmental interference.
- The infrared diode's pin is not easy to be oxidized, it is easy to be tinned, and the solderability is good;
- Long service life, no red storm, high reliability
- Suitable for infrared products such as electronic toy remote control, infrared camera, infrared temperature measurement, etc.
- See more on Amazon...
Brand: Gikfun | Manufacturer: Esooho
See On Amazon #2
CHANZON 940nm IR Infrared LED Diode 5mm Emitter + Receiver Sender Reciver Kit + VS1838B 1838 Sensor Ray Night Vision 940 nm 20pcs Lighting Lamp Bulbs Assortment for Arduino Raspberry
Asin: B07TLBJR5J | Model: 20FIR-3SE-KIT | PartNumber: 20FIR-3SE-KIT
Shipping Weight: 0.65Oz / 0.018Kg Pack Of 20 20Pcs Leddiode Infra Red Photodiode.
Vs 1838B High Sensitive,Low Forward Voltage Assorted.
Compatible With: Electronic Devices, Phototransistor, Communication Equipment, Ir Beam Sensors, Detector, Infrared Remote, Diy Pcb Circuit, Throwies,Arduino, Raspberry Pi, Hobby, Science Experiments,Breadboard,Camera,Remote.
Emitter Voltage: 1.2-1.5V,Receiver Vs1838b Voltage:3V-5V, Through Hole Dip 2Pins 5Mmled Leds Set Transmitter Lights.
Features
- Overview: 10pcs 940nm Sender with Emitting Angle 45 Degrees, 5pcs 940nm Receiver with Receive Angle 30 Degrees, 5pcs HX1838 VS1838B TL1838 Receiver with Receive Angle 70 Degrees
- Emitter Voltage: 1.2-1.5V,Receiver VS1838B Voltage:3V-5V, Through Hole DIP 2pins 5mmled LEDs Set Transmitter Lights
- Shipping Weight: 0.65oz / 0.018kg Pack of 20 20pcs Leddiode Infra Red Photodiode
- Compatible with: Electronic devices, Phototransistor, Communication equipment, IR beam sensors, detector, Infrared Remote, DIY PCB Circuit, Throwies,Arduino, Raspberry Pi, Hobby, Science Experiments,Breadboard,Camera,Remote
- vs 1838b High Sensitive,Low forward voltage Assorted
- See more on Amazon...
Brand: CHANZON | Manufacturer: CHANZON
Dimensions: 0.59 x 5.31 x 4.33 inches | Weight: 0.02 Pounds
See On Amazon #3
Gikfun Digital 38khz Ir Receiver Ir Transmitter Sensor Module Kit for Arduino (Pack of 3 Sets) EK8477
Asin: B0816P2545 | Model: gdagre-802 | PartNumber: gdagre-802 | Ean: 8002124223855
It Is Suitable For Infrared Communication, Infrared Remote Control, Apply To A Variety Of Platforms Including Arduino/51/Avr/Arm.
Pin Definitions: (1) Output (2) Vcc (3) Gnd.
With Signal Indicating Led, Easy To Observe And Debug..
This Ir Transmitter Sensor Module Is Directly Launched By A Single Tube, It Requires Waveform Modulation Through The Program..
Features
- Note: The white smudge is not corrosion damage, it's flux, can wipe it off with a rag, does not affect the use of the module
- This ir transmitter sensor module is directly launched by a single tube, it requires waveform modulation through the program.
- It is suitable for infrared communication, infrared remote control, apply to a variety of platforms including Arduino/51/AVR/ARM
- With signal indicating LED, easy to observe and debug.
- Pin Definitions: (1) Output (2) Vcc (3) GND
- See more on Amazon...
Brand: Gikfun | Manufacturer: Esooho
See On Amazon #4
Gikfun 5mm 940nm LEDs Infrared Emitter IR Emission and IR Receiver Diode for Arduino (Pack of 40pcs) EK1964
Asin: B09DK78ZT1
The Demodulated Output Signal Can Directly Be Decoded By A Microprocessor. Hs0038b Is The Standard Ir Remote Control Receiver Series, Supporting All Major Transmission Codes..
Low Power Consumption, High Immunity Against Ambient Light.
Internal Filter For Pcm Frequency, Ttl And Cmos Compatibility.
The Hs0038b - Series Are Miniaturized Receivers For Infrared Remote Control Systems. Pin Diode And Preamplifier Are Assembled On Lead Frame, The Epoxy Package Is Designed As Ir Filter..
Features
- Suitable for infrared products such as electronic toy remote control, infrared camera, infrared temperature measurement, etc.
- The HS0038B - series are miniaturized receivers for infrared remote control systems. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter.
- The demodulated output signal can directly be decoded by a microprocessor. HS0038B is the standard IR remote control receiver series, supporting all major transmission codes.
- Internal filter for PCM frequency, TTL and CMOS compatibility
- Low power consumption, High immunity against ambient light
- See more on Amazon...
Brand: Gikfun | Manufacturer: Esooho
Weight: 0.05 pounds
See On Amazon #5
DORHEA 2 Pcs Infrared LED Light Board Module for Raspberry Pi Camera Night Vision, 3W 850 IR High Power Night Vision Infrared Illuminator with Adjustable Resistor for Raspberry Pi Camera
Asin: B07FM6LL3V | Model: 15629-light | PartNumber: 15629-light | Ean: 0701715553682 | UPC: 701715553682
With Adjustable Resistor, For Controlling The Ambient Light Threshold Of Toggling The Infrared Led.
Light-Sensing Infrared Led Board.
Allows Adding Night Vision Function To Rpi Camera (E) Or Rpi Camera (F).
Onboard Photoresistor, The Ambient Light Detector.
Features
- 3W high-power 850 infrared LED,designed to work for Raspberry Pi camera
- Onboard photoresistor, the ambient light detector
- With adjustable resistor, for controlling the ambient light threshold of toggling the infrared LED
- Allows adding night vision function to RPi Camera (E) or RPi Camera (F)
- Light-sensing Infrared LED Board
- See more on Amazon...
Brand: DORHEA | Manufacturer: DORHEA
See On Amazon #6
DKARDU Digital 38khz Ir Receiver Sensor Module + 38khz Ir Transmitter Sensor Module with Dupont Cable for Arduino Electronic Building Block,5 Pieces of Each
Asin: B0C9TGJ99R | Model: JK-US-484-1 | PartNumber: JK-US-484-1
【Pin Definitions】:(1) Output (2) Vcc (3) Gnd; With Signal Indicating Led, Easy To Observe And Debug..
【Application】:Widely Used In Infrared Communication, Infrared Remote Control, Apply To A Variety Of Platforms Including For Arduino/For Raspberry Pi/For 51/For Avr/For Arm..
【Note】:The White Smudge Is Not Corrosion Damage, It's Flux, Can Wipe It Off With A Rag, Does Not Affect The Use Of The Module..
【Receive Sensor】:Adopt 1838 Remote Control Receiver With High Sensitivity, With This Ir Receiver, The For Arduino Project Is Able To Receive Command From Any Ir Remoter Controller If You Have The Right Decoder..
Features
- Transmitter sensor :This ir transmitter sensor module is directly launched by a single tube, it requires waveform modulation through the program.
- Receive sensor :Adopt 1838 remote control receiver with high sensitivity, with this IR receiver, the for Arduino project is able to receive command from any IR remoter controller if you have the right decoder.
- Pin Definitions :(1) Output (2) Vcc (3) GND; With signal indicating LED, easy to observe and debug.
- Note :The white smudge is not corrosion damage, it's flux, can wipe it off with a rag, does not affect the use of the module.
- Application :Widely used in infrared communication, infrared remote control, apply to a variety of platforms including for Arduino/for Raspberry pi/for 51/for AVR/for ARM.
- See more on Amazon...
Brand: DKARDU | Manufacturer: DKARDU
See On Amazon #7
KOOBOOK 2Pcs Digital 38KHz Infrared IR Receiver Sensor Module for Arduino Compatible
Asin: B07S66T3WT | Model: KB053 | PartNumber: KB053 | Ean: 0682559865943 | UPC: 682559865943
With 1838 Remote Control Receiver, The Sensitivity Is High..
2 Fixing Holes For Easy Installation, Aperture 3.1Mm, Pcb Size: 23.5*21.5Mm..
Operating Voltage 5V, Digital Output, With Data Indicator..
It Will Be Also Easy To Make Your Own Ir Controller Using Ir Transmitter..
Features
- IR is widely used in remote control. With this IR receiver, the Arduino project is able to receive command from any IR remoter controller if you have the right decoder.
- It will be also easy to make your own IR controller using IR transmitter.
- With 1838 remote control receiver, the sensitivity is high.
- Operating voltage 5V, digital output, with data indicator.
- 2 fixing holes for easy installation, aperture 3.1mm, PCB size: 23.5*21.5mm.
- See more on Amazon...
Brand: KOOBOOK | Manufacturer: KOOBOOK
Warranty: NO
See On Amazon #8
XINGYHENG 50 Pairs 5mm 940nm Infrared Diode Emission and IR Receiver
Asin: B01MFCFLA7 | Model: 50pairs | PartNumber: 50pairs | Ean: 0605749399097 | UPC: 605749399097
3. Peak Wavelength (Nm): 940Nm.
5. Operate Distance : 18~20M.
4. Bulb Size Diameter : 5Mm.
2. Frequence : 38Khz.
Features
- 1. Voltage : 2.7~5.5V
- 2. Frequence : 38KHz
- 3. Peak wavelength (nm): 940nm
- 4. Bulb Size diameter : 5mm
- 5. Operate Distance : 18~20m
- See more on Amazon...
Brand: XINGYHENG | Manufacturer: XLX
See On Amazon #9
MELIFE 5 Sets Digital 38khz Ir Receiver Ir Transmitter Sensor Module Kit for EK8477.
Asin: B08YK39N85 | Ean: 0701715463646 | UPC: 701715463646
Pin Definitions: (1) Output (2) Vcc (3) Gnd;.
Widely Used For Infrared Communication, Infrared Remote Control, Apply To A Variety Of Platforms Including 51/Avr/Arm;With Signal Indicating Led, Easy To Observe And Debug..
Attention: The White Smudge Is Not Corrosion Damage, It's Flux, Can Wipe It Off With A Rag, Does Not Affect The Use Of The Module;.
It Requires Waveform Modulation Through The Program;.
Features
- This Ir transmitter sensor module is directly launched by a single tube;
- It requires waveform modulation through the program;
- Pin Definitions: (1) Output (2) Vcc (3) GND;
- Attention: The white smudge is not corrosion damage, it's flux, can wipe it off with a rag, does not affect the use of the module;
- Widely used for infrared communication, infrared remote control, apply to a variety of platforms including 51/AVR/ARM;With signal indicating LED, easy to observe and debug.
- See more on Amazon...
Brand: MELIFE | Manufacturer: MELIFE
See On Amazon #10
MagicW Digital 38khz Ir Receiver 38khz Ir Transmitter Sensor Module Kit for Arduino Compatible
Asin: B01E20VQD8 | Model: 4330159506 | PartNumber: 4330159506 | Ean: 6000006737430
✅ Can Be Used For Remoter Control,Can Be Compatible With Wrobot Digital 38Khz Ir Transmitter Sensor.
✅ Modulate Frequency : 38Khz.
✅ Power Supply : 5V.
✅ 1Pcs 38Khz Ir Receiver Sensor And 1Pcs 38Khz Ir Transmitter Sensor.
Features
- Based on the 38KHz IR Receiver Sensor
- 1pcs 38KHz IR Receiver Sensor and 1pcs 38KHz IR Transmitter Sensor
- Can be used for remoter control,Can be compatible with Wrobot Digital 38KHz IR Transmitter Sensor
- Power Supply : 5V
- Modulate Frequency : 38Khz
- See more on Amazon...
Brand: MXXGMYJ | Manufacturer: MXXGMYJ
See On Amazon #11
Digital 38khz Ir Receiver Ir Transmitter Sensor Module Kit FMHXG 2PCS Digital 38khz Ir Receiver Sensor Module + 2PCS 38khz Ir Transmitter Sensor Module Kit for Electronic Building Block
Asin: B0C36W2681
Size: 23.5X21.5Mm, With 2 Fixing Holes, Easy To Install. Aperture 3.1Mm With Data Indicator Light,.
Widely Used In Infrared Communication, Infrared Remote Control, Suitable For A Variety Of Platforms Including 51/Avr/Arm; With Signal Indication Led For Easy Observation And Commissioning..
Pin Definition: Dat Digital Output Interface, Vcc 5V Dc Power Supply Positive, Gnd 5V Dc Power Supply Negative..
It Adopts 1838 Remote Control Receiving Head With High Sensitivity..
Features
- This infrared emitter sensor module is emitted directly by a single tube; It requires waveform modulation by programmatic.
- It adopts 1838 remote control receiving head with high sensitivity.
- Size: 23.5x21.5mm, with 2 fixing holes, easy to install. Aperture 3.1mm with data indicator light,
- Pin definition: DAT digital output interface, VCC 5V DC power supply positive, GND 5V DC power supply negative.
- Widely used in infrared communication, infrared remote control, suitable for a variety of platforms including 51/AVR/ARM; With signal indication LED for easy observation and commissioning.
- See more on Amazon...
Brand: FMHXG | Manufacturer: FMHXG
See On Amazon #12
GAOHOU KY-005 38KHz Modulating Infrared IR Transmitter Sensor Module for Arduino
Asin: B0794P31LB | Model: BU0306 | PartNumber: BU0306 | Ean: 0604714487296 | UPC: 604714487296
Transmit 38Khz Modulating Signal.
Note: The Color Of Item Might Be Slightly Different From The Picture Shown, Which Mainly Lies In Different Light Effect And Computer Monitor. Please Give Us Your Understanding. Thank You!.
Suitable For Arduino Diy Project.
Brand: Keyes; Model: Ky-005.
Features
- This is 38KHz Infrared IR transmitter sensor module For Arduino
- Brand: KEYES; Model: KY-005
- Transmit 38KHz modulating signal
- Suitable for Arduino DIY project
- Note: The color of item might be slightly different from the picture shown, which mainly lies in different light effect and computer monitor. Please give us your understanding. Thank you!
- See more on Amazon...
Brand: GAOHOU | Manufacturer: GAOHOU
See On Amazon #13
daier 20Pairs LED Infrared Emitter and IR Receiver Diode,38Khz LEDs Infrared Emission and Receiver Tube for Arduino
Asin: B0B4CRZYVB
Used For:Electronic Devices, Phototransistor, Communication Equipment, Ir Beam Sensors, Infrared Remote, Diy Pcb Circuit, Arduino, Raspberry Pi, Hobby, Science Experiments,Breadboard.
Application:Audio-Visual Equipment (Speakers, Tv, Dvd, Satellite Receivers, Etc.); Household Appliances (Air Conditioning, Electric Fans, Lighting, Etc.); And Other Infrared Remote Control Products..
Features
- Voltage : 2.7~5.5V; Frequence : 38KHz; Receiver Angle : 45 ; Bulb Size diameter : 5mm; Operate Distance : 18~20m.
- Application:audio-visual equipment (speakers, TV, DVD, satellite receivers, etc.); household appliances (air conditioning, electric fans, lighting, etc.); and other infrared remote control products.
- Used For:Electronic devices, Phototransistor, Communication equipment, IR beam sensors, Infrared Remote, DIY PCB Circuit, Arduino, Raspberry Pi, Hobby, Science Experiments,Breadboard
- See more on Amazon...
Brand: daier | Manufacturer: daier
See On Amazon
Looking For Something Else?
Search