SaiDian 1 Pcs Subwoofer Amplifier Car Audio Power Amplifier Board 12V 1000W Mono High Power Bass Subwoofer Amp for Car Speaker Modification
Asin: B08XGHMTHN | Model: 779675963087 | PartNumber: 779675963087 | Ean: 0779675963087 | UPC: 779675963087
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Operating Voltage: 12V;Rated Power: 600W;Peak Power: 1000W;Impedance: 4Ω..
Size: 23.5X15.5Cm (Lxw).Light Weight, Handy And Easy To Install..
Frequency Response: 30Hz~280Khz;Sensitivity: 75-90Db; Distortion: 0.01%;Channels: 1-Channel..
Current /Amperage Overload, Short Circuits, Thermal Overload,Dc Offset..
Features
- 12V 1000W Powerful Bass Amplifier Board for Car Modification.High power, good sound quality, no distortion, give you a great hearing enjoyment.
- Current /Amperage Overload, Short Circuits, Thermal Overload,DC Offset.
- Operating Voltage: 12V;Rated Power: 600W;Peak Power: 1000W;Impedance: 4 .
- Frequency Response: 30Hz~280KHz;Sensitivity: 75-90dB; Distortion: 0.01%;Channels: 1-Channel.
- Size: 23.5x15.5cm (LXW).Light weight, handy and easy to install.
- See more on Amazon...
Brand: SaiDian | Manufacturer: SaiDian
See On Amazon Similar To SaiDian 1 Pcs Subwoofer Amplifier
#1
Skar Audio RP-1200.1D Monoblock Class D MOSFET Amplifier with Remote Subwoofer Level Control, 1200W
Asin: B07F1FXPH1 | Model: RP-1200.1D | PartNumber: RP-1200.1D | Ean: 0011922308433 | UPC: 011922308433
Frequency Response: 20Hz - 250Hz, On-Board Bass Eq Switch With +6 Or +12Db Boost At 45Hz.
Stable At 1 Ohm | Remote Subwoofer Level Control Included.
Highly Efficient Heatsink Design Allows For Maximum Reliability & Performance.
Featuring 4-Way Protection Circuitry And 4 Gauge Power & Ground Input Terminals For Maximum Current Flow. Damping Factor - 150<.
Peak Power At 1 Ohm: 1,600 Watts | Rms Power At 1 Ohm: 1,200 Watts.
Features
- Class D MOSFET Monoblock Power Amplifier
- Peak Power at 1 Ohm: 1,600 Watts | RMS Power at 1 Ohm: 1,200 Watts
- Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
- Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Damping Factor - 150<
- Stable at 1 ohm | Remote Subwoofer Level Control Included
- Highly Efficient Heatsink Design allows for Maximum Reliability & Performance
- See more on Amazon...
Brand: Skar Audio | Manufacturer: Skar Audio
Dimensions: 2.50 x 16.00 x 6.00 inches | Weight: 7.20 pounds
Warranty: 2 year limited warranty
See On Amazon #2
Skar Audio RP-800.1DM 800 Watt Monoblock Class D Marine Subwoofer Amplifier
Asin: B0747ZHK7D | Model: RP-800.1DM | PartNumber: RP-800.1DM | Ean: 0767408281720 | UPC: 767408281720
Fully Marinized With Waterproof Coating On Circuit Board & Rust Proof Painting On Mechanical Case.
Highly Efficient Heatsink Design Allows For Maximum Reliability & Performance.
Featuring 4-Way Protection Circuitry And 4 Gauge Power & Ground Input Terminals For Maximum Current Flow.
Stable At 1 Ohm | Remote Subwoofer Level Control Included.
Frequency Response: 20Hz - 250Hz, On-Board Bass Eq Switch With +6 Or +12Db Boost At 45Hz.
Peak Power At 1 Ohm: 1,200 Watts | Rms Power At 1 Ohm: 800 Watts.
Features
- Marine Class D MOSFET Monoblock Power Amplifier
- Peak Power at 1 Ohm: 1,200 Watts | RMS Power at 1 Ohm: 800 Watts
- Fully Marinized with Waterproof Coating on Circuit Board & Rust Proof Painting on Mechanical Case
- Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
- Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow
- Stable at 1 ohm | Remote Subwoofer Level Control Included
- Highly Efficient Heatsink Design allows for Maximum Reliability & Performance
- See more on Amazon...
First Available: 07/31/2017
Brand: Skar Audio | Manufacturer: Skar Audio
Dimensions: 2.20 x 10.13 x 6.30 inches | Weight: 7.25 Pounds
Warranty: 2 year limited warranty
See On Amazon #3
Skar Audio Dual 12" Complete 2,400 Watt SDR Series Subwoofer Bass Package - Includes Loaded Enclosure with Amplifier
Asin: B08FGPHJP6 | Model: BNDLE-SDR-2X12D4-RP-1200.1D-SKAR4ANL-OFC | PartNumber: BNDLE-SDR-2X12D4-RP-1200.1D-SKAR4ANL-OFC | Ean: 0810028811294 | UPC: 810028811294
Includes X1 Skar Audio Sdr-2X12d4 Dual 12" Loaded 2,400 Watt Vented Subwoofer Enclosure.
Includes X1 Skar Audio Skar4anl-Ofc 4 Gauge Premium Ofc Complete Amplifier Wiring Kit.
Includes X1 Skar Audio Rp-1200.1D Class D 1,200 Watt Monoblock Car Subwoofer Amplifier.
Peak Power: 2,400 Watts | Rms Power: 1,200 Watts.
Features
- All-in-One Complete SDR Series Dual 12-inch Loaded Subwoofer Complete Bass Package
- Peak Power: 2,400 Watts | RMS Power: 1,200 Watts
- Includes x1 Skar Audio SDR-2X12D4 Dual 12 Loaded 2,400 Watt Vented Subwoofer Enclosure
- Includes x1 Skar Audio RP-1200.1D Class D 1,200 Watt Monoblock Car Subwoofer Amplifier
- Includes x1 Skar Audio SKAR4ANL-OFC 4 Gauge Premium OFC Complete Amplifier Wiring Kit
- See more on Amazon...
Brand: Skar Audio | Manufacturer: Skar Audio
Dimensions: 21.00 x 40.75 x 22.00 inches | Weight: 119.00 pounds
See On Amazon #4
MTX TNP212D2 12" 1200 Watt 4 Ohm Dual Loaded Car Audio Subwoofer Package with Sub Enclosure, Planet 1500W Monoblock A/B Amplifier & 8 Gauge Wiring Kit
Asin: B01BGW8GOM | Ean: 0744271357233 | UPC: 744271357233
Heavy Duty Enclosure: Mtx Car Speaker Subwoofer Box Enclosure Also Features A Solid Mdf Construction With Thick Black Carpet That Matches Any Car Interior.
Dimensions And Inclusions: Made With Soundstorm Aks8 Complete 8-Gauge Amplifier Installation Kit, Fuse Holder, 30-Feet Speaker Wire, And 6-Feet Split Loom Tubing; Dimensions 14 By 26.96 By 13.5 By 11.13 Inches.
Top Class Amplifier: Features A Planet Audio Amplifier With Switchable Sound Sensitivity Input And Selectable Bass Boost That Can Be Customized According To Your Preference; Remote Control Is Also Included.
Built With Quality Materials: Mtx Terminator Series Subwoofer System Boasts 1200 Watts Max Power And 400 Watts Rms; Built With Rubber Surround, Polypropylene Cone And A 2-Inch Aluminum Single 4 Ohms Voice Coil.
Features
- Experience High-Quality Sounds: Complete kit for your car's sound system with the 12-inch dual loaded car subwoofer with sub enclosure
- Built with Quality Materials: MTX Terminator series subwoofer system boasts 1200 watts max power and 400 watts RMS; Built with rubber surround, polypropylene cone and a 2-inch aluminum single 4 ohms voice coil
- Heavy Duty Enclosure: MTX car speaker subwoofer box enclosure also features a solid MDF construction with thick black carpet that matches any car interior
- Top Class Amplifier: Features a Planet Audio Amplifier with switchable sound sensitivity input and selectable bass boost that can be customized according to your preference; Remote control is also included
- Dimensions and Inclusions: Made with Soundstorm AKS8 complete 8-gauge amplifier installation kit, fuse holder, 30-feet speaker wire, and 6-feet split loom tubing; Dimensions 14 by 26.96 by 13.5 by 11.13 inches
- See more on Amazon...
Brand: MTX | Manufacturer: MTX
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.00 pounds
See On Amazon #5
Skar Audio Single 12" Complete 1,200 Watt SDR Series Subwoofer Bass Package - Includes Loaded Enclosure with Amplifier
Asin: B08FNLC7X4 | Model: BNDLE-SDR-1X12D2-RP-800.1D-SKAR4ANL-CCA | PartNumber: BNDLE-SDR-1X12D2-RP-800.1D-SKAR4ANL-CCA | Ean: 0810028811317 | UPC: 810028811317
Includes X1 Skar Audio Sdr-1X12d2 Single 12" Loaded 1,200 Watt Vented Subwoofer Enclosure.
Includes X1 Skar Audio Skar4anl-Cca 4 Gauge Complete Amplifier Wiring Kit.
Includes X1 Skar Audio Rp-800.1D Class D 800 Watt Monoblock Amplifier.
Peak Power: 1,200 Watts | Rms Power: 600 Watts.
Features
- All-in-One Complete SDR Series Loaded Subwoofer Complete Bass Package
- Peak Power: 1,200 Watts | RMS Power: 600 Watts
- Includes x1 Skar Audio SDR-1X12D2 Single 12 Loaded 1,200 Watt Vented Subwoofer Enclosure
- Includes x1 Skar Audio RP-800.1D Class D 800 Watt Monoblock Amplifier
- Includes x1 Skar Audio SKAR4ANL-CCA 4 Gauge Complete Amplifier Wiring Kit
- See more on Amazon...
Brand: Skar Audio | Manufacturer: Skar Audio
Dimensions: 22.00 x 23.25 x 21.00 inches | Weight: 71.00 pounds
See On Amazon #6
Fosi Audio TP-02 TDA7498E Subwoofer Amplifier Mini Sub Bass Digital Class D Integrated Subwoofer Amp 220Watt
Asin: B07L6FN97Z | Model: TP-02 | PartNumber: TP-02
Tp-02 Subwoofer Amplifier For Home Theater Adopts Stmicroelectronics Tda7498e Chip. The Tda7498e Is A Dual Btl Class-D Audio Amplifier Chip With A Single Power Supply Designed For Home Speaker Systems Applications. Special Features: Smart Protection, Thermal Overload Protection, The Small Offset Of Less Than 20 Mv, Standby And Mute Features, Differential Inputs Minimize Common-Mode Noise..
What You Get: Tp-02 Home Hi-Fi Mono Integrated Class D Power Subwoofer Amplifier X1, Power Adapter X1, Ac Power Cord X1, User Manual X1, Our Worry-Free 24-Month Warranty, And Friendly Customer Service..
Greater Flexibility With Various Home Theater Audio Systems: Compatible With Older And Newer Source Equipment Including Rca Output..
Redefine The Bass: Tp-02 High-Efficiency Subwoofer Amplifier Serves Up Big Bass With Up To 220W Peak For Deep, Crisp, Clean Low Frequency Sound Effects..
Features
- TP-02 Class D digital subwoofer amplifier is a compact amp designed to power passive and subwoofers used in home theaters or whole-house audio systems.
- Redefine the Bass: TP-02 high-efficiency subwoofer amplifier serves up big bass with up to 220W peak for deep, crisp, clean low frequency sound effects.
- TP-02 subwoofer amplifier for home theater adopts STMicroelectronics TDA7498E chip. The TDA7498E is a dual BTL class-D audio amplifier chip with a single power supply designed for home speaker systems applications. Special features: smart protection, thermal overload protection, the small offset of less than 20 mV, standby and mute features, differential inputs minimize common-mode noise.
- Greater Flexibility with Various Home Theater Audio Systems: Compatible with older and newer source equipment including RCA output.
- What You Get: TP-02 home Hi-Fi mono integrated Class D power subwoofer amplifier x1, power adapter x1, AC power cord x1, user manual x1, our worry-free 24-month warranty, and friendly customer service.
- See more on Amazon...
Brand: Fosi Audio | Manufacturer: Fosi Audio
Dimensions: 1.00 x 5.00 x 3.00 Inches
Warranty: 18-month manufacturer
See On Amazon #7
PIONEER TS-WX1210AM - Powerful 12-inch Active Subwoofer with Built-in Amplifier, 1300 Watts Peak Power, and Compact Design for Deep Bass
Asin: B09RVH8H59 | Model: TS-WX1210AM | PartNumber: TS-WX1210AM | Ean: 0884938486910 | UPC: 884938486910
Low-Pass Crossover - Adjusting The Crossover Point (20 Hz – 130 Hz), You Can Customize The Subwoofer's Output To Match Your Preferences And The Characteristics Of Your Audio System. Enables You To Achieve A Balanced Sound And Preventing Any Overlap In The Frequency Response..
Instruction & Operation – Please See The Owner’S Manual For Full Detail And Operation Found Near The Bottom Of This Page (Technical Specifications). Dimensions 12.5" X 19.75" X 14.88".
Excellent Sound Reproduction - Its High-Quality Components And Precise Engineering Delivers Accurate And Detailed Sound. The Design And Construction Minimizes Distortion, For Clean And Crisp Bass Response..
Amplified Design - All In One Design Simplifies Installation And Space, Making It An Ideal Choice For Vehicles With Limited Space. Built-In Amplifier Ensures Optimal Power Delivery To The Subwoofer, Eliminating The Need For An External Amplifier..
Features
- Powerful Bass - 12-inch subwoofer and built-in amplifier, it produces a dynamic bass response that enhances the audio experience. It adds depth and richness, creating an immersive and thrilling soundstage that brings your music to life.Waterproof : No
- Amplified Design - All in one design simplifies installation and space, making it an ideal choice for vehicles with limited space. Built-in amplifier ensures optimal power delivery to the subwoofer, eliminating the need for an external amplifier.
- Low-Pass Crossover - Adjusting the crossover point (20 Hz 130 Hz), you can customize the subwoofer's output to match your preferences and the characteristics of your audio system. Enables you to achieve a balanced sound and preventing any overlap in the frequency response.
- Excellent Sound Reproduction - Its high-quality components and precise engineering delivers accurate and detailed sound. The design and construction minimizes distortion, for clean and crisp bass response.
- Instruction & Operation Please see the Owner s Manual for full detail and operation found near the bottom of this page (Technical Specifications). Dimensions 12.5 x 19.75 x 14.88
- See more on Amazon...
First Available: 11/01/2021
Brand: PIONEER | Manufacturer: Pioneer Corporation
Dimensions: 14.88 x 12.50 x 19.75 inches | Weight: 25.75 pounds
Warranty: 1 year
See On Amazon #8
Fosi Audio M04 Subwoofer Amplifier for Home Theater Mono Channel Digital Class D Integrated Power Amp for Passive Speakers Subwoofer Rated 100W MAX
Asin: B07942M4MC | Model: M04 | PartNumber: M04
The Mono Amplifier Home Audio Has A Small And Robust Design With A Built-In Low Pass Filter For Subwoofers And A Sub Frequency Control, Making It Practical And Powerful. It Uses Highly Efficient Class D Technology That Remains Cool Under Demanding Loads And Doesn't Take Up Much Space..
What You Get: M04 Subwoofer Amp X1, 19V/4.74A Power Supply X1, User Manual X1, Our Worry-Free 24-Month Warranty, As Well As Friendly Customer Service..
The Mini Subwoofer Amplifier Can Produce A Deep, Crisp, And Clean Low-Frequency Sound Effect, Making It An Excellent Addition To Dedicated Home Theaters. It Has Been Designed To Enhance The Sound And Performance Of Your Audio System At An Affordable Price..
The M04 Sub Amp Is Designed To Improve The Bass Response Of Passive Subwoofers. It Features A Selector Switch That Allows The User To Switch Between Subwoofer Bass Amplifier And Full-Frequency Mono Amplifier Modes..
Features
- The Fosi Audio M04 is a mono amplifier designed for driving passive subwoofers or speakers. It features the Texas Instruments TPA3116 chip and NE5532 op-amp, providing an output power of 100 watts for a 4-ohm subwoofer or speaker.
- The M04 SUB amp is designed to improve the bass response of passive subwoofers. It features a selector switch that allows the user to switch between subwoofer bass amplifier and full-frequency mono amplifier modes.
- The mono amplifier home audio has a small and robust design with a built-in low pass filter for subwoofers and a sub frequency control, making it practical and powerful. It uses highly efficient Class D technology that remains cool under demanding loads and doesn't take up much space.
- The mini subwoofer amplifier can produce a deep, crisp, and clean low-frequency sound effect, making it an excellent addition to dedicated home theaters. It has been designed to enhance the sound and performance of your audio system at an affordable price.
- What You Get: M04 subwoofer amp x1, 19V/4.74A power supply x1, user manual x1, our worry-free 24-month warranty, as well as friendly customer service.
- See more on Amazon...
Brand: Fosi Audio | Manufacturer: tp-01
Dimensions: 1.40 x 5.20 x 3.50 inches | Weight: 0.99 pounds
Warranty: 18-month manufacturer
See On Amazon #9
Nobsound NS-03G Subwoofer Amplifier 100W Mini SUB Power Amp
Asin: B072KDNW3F | Model: 4330353845 | PartNumber: 4330353845 | Ean: 7717842112558
Super Mini Size And Solid Shell. It Can Be Easily Placed On Your Desktop Or Your Subwoofer..
This One Doesn’T Include A Power Supply. You Can Choose Our High Quality 19V Power Supply (Asin: B074j81xrb) Or Buy The Power Supply You Like. Please Choose Good Quality Power Supply. We Recommend 12~24V, At Least 4A..
3.5Mm Aux Input. You Can Connect Various Sound Sources Like Phones, Cd Players, Tv Very Easily..
It Adopts Tpa3116d2 Chip And Can Offer 100W High Power. With Smooth Volume Control Knob..
Features
- NS-03G is a sub power amplifier for passive subwoofer. Please note it is not compatible with active/powered subwoofers as well as normal speakers.
- It adopts TPA3116D2 chip and can offer 100W high power. With smooth volume control knob.
- Super mini size and solid shell. It can be easily placed on your desktop or your subwoofer.
- 3.5mm AUX input. You can connect various sound sources like phones, CD players, TV very easily.
- This one doesn t include a power supply. You can choose our high quality 19V power supply (ASIN: B074J81XRB) or buy the power supply you like. Please choose good quality power supply. We recommend 12~24V, at least 4A.
- See more on Amazon...
Brand: Nobsound | Manufacturer: Nobsound
Dimensions: 3.54 x 2.70 x 1.30 inches | Weight: 0.44 pounds
See On Amazon #10
Nobsound G2 Subwoofer Power Amplifier Mini Mono SUB Amp 100W PBTL BTL Bridge Home Theater
Asin: B07MR6YCQ1 | Model: 8541737971 | PartNumber: 8541737971
It Has A Gain Setting Which Allows 4-Level Of Output Level Setting (20/26/32/36 Db). It Can Keep The Purity Of The Sound And Avoid The Resistor Influence. Besides, It Also Has A Bass Cutoff Frequency Control Knob..
Prompt And Courteous Customer Service. For Any Questions You Have, Please Feel Free To Contact Us On Amazon..
It Adopts Ti Tpa3116 And Ne5532 Op-Amp, Which Can Offer 100W High Power And Can Drive Most Home Sub And Mono Speakers. Its Optimized Circuit Can Ensure Totally No Background Noise. Besides, It Also Built-In Speaker Protection Circuit And Low Pass Bass Filter..
Applications: ① G2 Can Be Used As A Subwoofer Power Amplifier For Passive Subwoofers; ② G2 Can Be Used As A Mono Amp To Drive Single Channel. You Can Use Two G2 To Drive Left And Right Channel Separately, Which Are Known As Pblt / Btl Bridge Amp. Compared With Normal 2.0Ch Amps, It Can Ensure Totally No Interference Between Two Channels And Can Provide Higher Power..
Features
- G2 can be used as a sub amp or a mono channel amp. It has a mode switcher which can change between SUB and PBLT modes conveniently. Equipped with 19V 4.74A high quality power supply.
- Applications: G2 can be used as a subwoofer power amplifier for passive subwoofers; G2 can be used as a mono amp to drive single channel. You can use two G2 to drive left and right channel separately, which are known as PBLT / BTL Bridge amp. Compared with normal 2.0CH amps, it can ensure totally no interference between two channels and can provide higher power.
- It has a gain setting which allows 4-level of output level setting (20/26/32/36 dB). It can keep the purity of the sound and avoid the resistor influence. Besides, it also has a bass cutoff frequency control knob.
- It adopts TI TPA3116 and NE5532 op-amp, which can offer 100W high power and can drive most home sub and mono speakers. Its optimized circuit can ensure totally no background noise. Besides, it also built-in speaker protection circuit and low pass bass filter.
- Prompt and courteous customer service. For any questions you have, please feel free to contact us on Amazon.
- See more on Amazon...
Brand: Douk Audio | Manufacturer: Nobsound
See On Amazon #11
BOSS Audio Systems OX1.5KM Onyx Series Car Audio Subwoofer Amplifier 1500 High Output, Class A/B, 2/4 Ohm, Low/High Level Inputs, Low Pass Crossover, MOSFET Power, Monoblock, Full Range
Asin: B07P5JNFPG | Model: OX 1 5KM | PartNumber: OX 1 5KM | Ean: 0791489125833 | UPC: 791489125833
Class A/B Topology: Class ‘A’ Amplifiers Have Enormous Amount Of Current Flowing Through Its Output Transistors With No Audio Signal. Class ‘B’ Amplifiers Have No Current Flowing Through Its Outputs With No Audio Signal.
Variable Gain Control: The Gain Control Is Not For Adjusting Volume. It Simply Adjusts The Amount Of Signal That Is Coming From Your Receiver And Going To Your Amplifier.
Specs: Dimensions - 10.4” X 7” X 2.3”, Weight - 5.2 Lbs..
Switchable Bass Boost: Bass Boost Allows You To Adjust The Low Bass Within The Boost Range To Just The Way You Like It..
Low & High Level Inputs: A Low Level (Rca) Input Is Measured In Voltages. A High Level (+/- Wire) Input Is Measured In Wattages. Both Essentially Carry Signal From Your Receiver To Your Amplifier To Your Speakers.
Variable Low-Pass Crossover: Subwoofers Reproduce Sound Based On A Number Of Different Low-Range Frequencies. You Can Set Exact Sound Specifications For The Bass Frequency Reproduction.
Mosfet Power Supply: A Mosfet Is An Electrical Switch That Allows The Flow Of Electrical Current. It Controls The Output Voltage And Current Precisely By Removing The Output Current Sensing Loss & Eliminating All Secondary Feedback Circuitry.
Features
- POWER - 1500 Watts Max x 1 @2-Ohms, 750 Watts Max x 1 @4-Ohms
- MOSFET POWER SUPPLY: A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
- CLASS A/B TOPOLOGY: Class A amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class B amplifiers have no current flowing through its outputs with no audio signal
- VARIABLE LOW-PASS CROSSOVER: Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
- SWITCHABLE BASS BOOST: Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
- LOW & HIGH LEVEL INPUTS: A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
- VARIABLE GAIN CONTROL: The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- SPECS: Dimensions - 10.4 x 7 x 2.3 , Weight - 5.2 lbs.
- See more on Amazon...
Brand: BOSS Audio Systems | Manufacturer: BOSS Audio Systems
Dimensions: 2.30 x 10.40 x 6.30 inches | Weight: 5.00 pounds
See On Amazon #12
Pioneer TS-WX1210A 12 Sealed Active Subwoofer with Built In Amplifier, 1200 Watts Max Power Sub, Variable Bass Boost, Flexible Installation, Enhanced Car Audio
Asin: B0794XV3VN | Model: TSWX1210A | PartNumber: TSWX1210A | Ean: 0884938379823, 0689984720700 | UPC: 884938379823, 689984720700
Amplifier Features Class D Amplifier Cross Overs 0-12Db Bass Boost Remote Knob Included.
Enclosure Features Carpet Finish.
Subwoofer Features Cellulose Fiber Cone Urethane Surround Frequency Response 20 - 125 Sensitivity 114Db.
Features
- 1300W Max Single 12" Sealed Subwoofer Enclosure with Built-In Amplifier Power Handling Peak 1300W / RMS 350W Preloaded with a single 12" Subwoofer Built-in Class D amplifier Sealed enclosure with carpet
- Subwoofer Features Cellulose fiber cone Urethane surround Frequency Response 20 - 125 Sensitivity 114dB
- Amplifier Features Class D amplifier Cross Overs 0-12dB Bass Boost Remote knob included
- Enclosure Features Carpet finish
- See more on Amazon...
First Available: 08/25/2022
Brand: PIONEER | Manufacturer: Pioneer
Dimensions: 15.00 x 1.00 x 20.75 inches | Weight: 15.00 Pounds
See On Amazon #13
BELVA BPKG112v2 600W Single 12" Car Subwoofer with Ported Enclosure, Monoblock Amplifier, Wiring Kit and Remote Bass Knob
Asin: B0190MOZ0O | Model: BPKG112V2 | PartNumber: BPKG112V2 | Ean: 0818060013959 | UPC: 818060013959
Easy-To-Install So You Can Enjoy Listening On Your Favorite Music Right Away.
Power Handling: Peak: 600 Watts | Impedance: 2 Ohm Svc.
Polypropylene Cone That Is Lightweight Yet Strong Provides Accurate Mid And Low Notes For Better Sound Quality.
All-In-One Complete Subwoofer Package Compatible With Any Vehicle.
Features
- Includes Everything You Need: 12" Belva Subwoofer, Monoblock Amp, Ported Enclosure and Complete Amp Kit w/ RCAs
- All-in-one complete subwoofer package compatible with any vehicle
- Easy-to-install so you can enjoy listening on your favorite music right away
- Polypropylene cone that is lightweight yet strong provides accurate mid and low notes for better sound quality
- Power Handling: Peak: 600 watts | Impedance: 2 ohm SVC
- See more on Amazon...
Brand: BELVA | Manufacturer: Belva
Dimensions: 13.00 x 28.50 x 15.50 inches | Weight: 31.00 Pounds
See On Amazon #14
OceanAudio OAE-170.1 Car Audio Subwoofer Amplifier - Monoblock, Class A/B, 2/4 Ohm Stable, Mosfet Power Supply 340W - RMS Power @4 1 * 110W @2 1 * 170W Max Power @2 1 * 340W
Asin: B0CVC3MH7H | Model: OAE-170.1 | PartNumber: OAE-170.1 | Ean: 0764143587599 | UPC: 764143587599
Variable Bass Boost 0-12Db; Variable Low-Pass Filter 50-250Hz; Variable Input Gain Control 0.2-8V.
Remote Subwoofer Controller.
Thermal And Speaker Short Protection; Soft Turn-On Circuit.
Led Power And Protection Indicators; Auto-Turn On(High Level).
Full Range Or Lpf Mode Switch.
Rca And Speaker Level Inputs.
Features
- 2 stable; PWM MOSFET Power supply
- RCA and speaker level inputs
- Variable bass boost 0-12dB; Variable Low-pass filter 50-250Hz; Variable input gain control 0.2-8V
- Full range or LPF mode switch
- Thermal and speaker short protection; Soft turn-on circuit
- LED power and protection indicators; Auto-turn on(high level)
- Remote subwoofer controller
- See more on Amazon...
Brand: OceanAudio | Manufacturer: OceanAudio
Weight: 5.00 Pounds
See On Amazon #15
Skar Audio Single 8" Complete 1,200 Watt EVL Series Subwoofer Bass Package - Includes Loaded Enclosure with Amplifier
Asin: B0BG6T6L57 | Model: undefined | PartNumber: undefined | Ean: 0810028812352 | UPC: 810028812352
Includes X1 Skar Audio Evl-1X8d2 Single 8" Loaded 1,200 Watt Vented Subwoofer Enclosure.
Includes X1 Skar Audio Skar4anl-Ofc 4 Gauge Premium Ofc Complete Amplifier Wiring Kit.
Includes X1 Skar Audio Rp-800.1D Class D 800 Watt Monoblock Car Subwoofer Amplifier.
Peak Power: 1,200 Watts | Rms Power: 600 Watts.
Features
- All-in-One Complete EVL Series Loaded Subwoofer Complete Bass Package
- Peak Power: 1,200 Watts | RMS Power: 600 Watts
- Includes x1 Skar Audio EVL-1X8D2 Single 8 Loaded 1,200 Watt Vented Subwoofer Enclosure
- Includes x1 Skar Audio RP-800.1D Class D 800 Watt Monoblock Car Subwoofer Amplifier
- Includes x1 Skar Audio SKAR4ANL-OFC 4 Gauge Premium OFC Complete Amplifier Wiring Kit
- See more on Amazon...
Brand: Skar Audio | Manufacturer: Skar Audio
Dimensions: 20.00 x 25.50 x 21.00 inches | Weight: 69.00 Pounds
See On Amazon #16
STINGER Single 12" 700 Watt (RMS) Loaded Subwoofer Enclosure | Ported 1 Ohm Subwoofer Box | Down Firing Box for Max Sound (700 Watts RMS/1200 Watts Max) MC1S12A
Asin: B0B9QZJVWF | Ean: 0609098901215 | UPC: 609098901215
Compact Design: The Compact And Lightweight Design Of Our Subwoofer Enclosure Makes It Easy To Install In Your Car Or Home Theater System..
Easy Installation: With Simple And Clear Instructions, Our Subwoofer Enclosure Is Easy To Install Even If You're Not An Audio Expert..
High-Quality Construction: Our Subwoofer Enclosure Is Built To Last With Premium Materials And Expert Craftsmanship, Ensuring Optimal Performance For Years To Come..
Powerful Bass: Our 12 Inch Subwoofer Enclosure Delivers Deep And Powerful Bass That Adds Excitement To Your Music And Movies..
Features
- Versatile Compatibility: Our subwoofer enclosure is compatible with a wide range of audio systems, making it a great choice for upgrading your existing setup or building a new one from scratch.
- Powerful Bass: Our 12 inch subwoofer enclosure delivers deep and powerful bass that adds excitement to your music and movies.
- Compact Design: The compact and lightweight design of our subwoofer enclosure makes it easy to install in your car or home theater system.
- High-Quality Construction: Our subwoofer enclosure is built to last with premium materials and expert craftsmanship, ensuring optimal performance for years to come.
- Easy Installation: With simple and clear instructions, our subwoofer enclosure is easy to install even if you're not an audio expert.
- See more on Amazon...
Brand: STINGER | Manufacturer: Stinger
Dimensions: 18.00 x 39.25 x 20.75 inches | Weight: 48.00 pounds
See On Amazon #17
DC 12V-15V 25W~30W Subwoofer Amplifier Board Mini HiFi Class D Mono Channel Digital Audio Power Amplifier Super Bass Amp Module for PC Computer Desktop Speaker, Car Audio Speaker
Asin: B09Y5C1BC7 | Model: Mono: 25W | PartNumber: Mono: 25W | Ean: 0780861370756 | UPC: 780861370756
Test Data: Output Power: Vdd = 7.4V Rl = 2 Ω 12.5W; Output Power: Vdd = 9.0V Rl= 2 Ω 18W; Output Power: Vdd = 12V Rl = 4 Ω 20W; Output Power: Vdd = 16V Rl= 4 Ω 32W..
Pcb Material: Fr-4 Glass Fiber Board, Thickness: 1.6Mm. Onboard Fixing Hole Diameter: M3; Board Size: 1.57X1.65X0.78Inch (Lxwxh), Excluding Potentiometer Handle Length (Pot. Protruding Length 0.59Inch).The Potentiometer Mounting Hole Diameter Needs To Be 0.28Inch/7Mm..
In Order To Obtain A More Shocking Effect, It Is Recommended To Use A 4-5 Inch, 4-6Ω 20-50W Subwoofer Speaker. Upper Crossover Point: 110Hz..
Power Supply: Dc6.5-15V (Depending On The Required Output Power), Eg. Power Adapter, Switching Power Supply, Battery, Etc., The Recommended Current Is More Than 3A. Power Input Interface: 5.5*2.1Dc Socket Or Pad Of Welding Wire; Audio Input Interface: 3.5Mm Plug Or Pad Of Welding Wire..
Features
- Notice: This power amplifier board is pure bass output(Subwoofer), no midrange and treble output. (In order to obtain a larger power, it is recommended that the power supply be not lower than 9V.)
- Power supply: DC6.5-15V (depending on the required output power), eg. power adapter, switching power supply, battery, etc., the recommended current is more than 3A. Power input interface: 5.5*2.1DC socket or pad of welding wire; Audio input interface: 3.5mm plug or pad of welding wire.
- Test Data: Output power: VDD = 7.4V RL = 2 12.5W; Output power: VDD = 9.0V RL= 2 18W; Output power: VDD = 12V RL = 4 20W; Output power: VDD = 16V RL= 4 32W.
- In order to obtain a more shocking effect, it is recommended to use a 4-5 inch, 4-6 20-50W subwoofer speaker. Upper crossover point: 110Hz.
- PCB material: FR-4 glass fiber board, thickness: 1.6mm. Onboard fixing hole diameter: M3; Board size: 1.57x1.65x0.78inch (LxWxH), excluding potentiometer handle length (Pot. protruding length 0.59inch).The potentiometer mounting hole diameter needs to be 0.28inch/7mm.
- See more on Amazon...
Brand: QINIZX | Manufacturer: QINIZX
Dimensions: 0.78 x 1.57 x 1.65 Inches | Weight: 0.07 pounds
Warranty: Manufacturer warranty for 60 days from date of purchase.
See On Amazon #18
PSB-1000DSP Class D 1000W RMS Subwoofer Amplifier for Home Theater with RS-232 / IR Remote Control, Dual Sub Speaker Outputs
Asin: B09WQGTWFK | Ean: 0850006657520 | UPC: 850006657520
✅【Rs-232 Control Ports】 Built-In Rs232 Control Over The Master Volume And Master Muting Of The Amplifier Through The Use Of Rs-232 Commands, This Interface Will Control An Internal Digital Potentiometer And Mimic The Standard 10Kω Potentiometer Typically Put Into A Wall- Plate. The Available Commands Will Mute, Increase Or Decrease The Vol- Ume, Or Set The Volume To A Speci C Value..
✅【Audio On/Off Detects, Rs-232 & 12Vdc Trigger】A Three Way Switch On The Rear Panel Allows You To Select The 12V Trigger Mode, Auto On/Off By Music Signal Detect Mode, Or Set To The Always-On Mode. The Amp Will Also Can Be Choose From 5-30 Minutes In 5 Minute Increments Or Turn The Function Off From The Dsp Menu..
✅【Digital Signal Processing (Dsp) Performance】Built-In Digital Signal Process (Dsp), Access The Menu Function Screen For Using The Selection Knob To Choose And Adjust Master Volume Level, Crossover Frequency, 4 Different Crossover Slopes, Phase, 4 Different Low Cut. Allows Store Up To 3 Presents Are Optimized For 8”, 10” And 12” Subs..
✅【Easy Connection To Any System】Features A Stereo/Mono Line Level Audio Input That Can Receive Full Band Audio From Any Audio Amplifier, Receiver Or Preamp Or An Lfe Input, Also Features A Stereo Speaker Level Input/Outputs Connector And Passthrough For Easy To Work With Older Amplifier/Home Theater Receiver Do Not Have Line Level Outputs..
Features
- High Wattage Power Output 2U design subwoofer amplifier delivers plenty of solid clean power with high fidelity, strong and deep bass frequency to drive medium-to-large sized in-wall or floor stand style subwoofer speakers. It provides 1 x 1000 watts RMS @ 4 Ohms ( or 2 x 500W RMS @ 8 Ohms Minimum Load ONLY ), makes your home audio and home theater audio system s bass shocking auditory effects feel like in the cinema.
- Easy Connection to Any System Features a stereo/mono line level audio input that can receive full band audio from any audio amplifier, receiver or preamp or an LFE input, also features a stereo speaker level input/outputs connector and passthrough for easy to work with older amplifier/home theater receiver do not have line level outputs.
- RS-232 Control Ports Built-in RS232 control over the master volume and master muting of the amplifier Through the use of RS-232 commands, this interface will control an internal digital potentiometer and mimic the standard 10K potentiometer typically put into a wall- plate. The available commands will mute, increase or decrease the vol- ume, or set the volume to a speci c value.
- Digital Signal Processing (DSP) Performance Built-in digital signal process (DSP), access the menu function screen for using the selection knob to choose and adjust Master Volume Level, Crossover Frequency, 4 different Crossover Slopes, Phase, 4 different Low Cut. Allows store up to 3 presents are optimized for 8 , 10 and 12 subs.
- Audio On/Off Detects, RS-232 & 12VDC Trigger A three way switch on the rear panel allows you to select the 12V trigger mode, auto on/off by music signal detect mode, or set to the always-on mode. The amp will also can be Choose from 5-30 minutes in 5 minute increments or turn the function off from the DSP menu.
- See more on Amazon...
Brand: Soundavo | Manufacturer: Soundavo
Dimensions: 9.40 x 17.12 x 3.50 inches
See On Amazon #19
Acoustic Audio WS1005 Passive Subwoofer Amp 200 Watt Amplifier for Home Theater
Asin: B00VF5TY7E | Model: WS1005 | PartNumber: WS1005 | Ean: 0849155034221 | UPC: 849155034221
Output Impedance: 4-8 Ohm. Cl3 Rated In Wall Certified Raw Speaker Wire To Connect Your Amp To The Speaker.
Lfe And Rca Inputs For Use From A Home Audio Receiver. Raw Wire Outputs..
Sub Volume And Crossover Control Knobs.
Power Amplifier Output: 200 Watts, Low Bass Frequency Response Of 50 – 200 Hz +/- 3Db.
Features
- To be used with Passive Subwoofers only ,In Wall or In Ceiling Home Entertainment,Home Theater Systems,Industrial Sound Systems ,Multiple Room Systems
- Power Amplifier Output: 200 Watts, Low Bass Frequency Response of 50 200 Hz +/- 3dB
- Output Impedance: 4-8 ohm. CL3 Rated in wall certified raw speaker wire to connect your amp to the speaker
- Sub volume and crossover control knobs
- LFE and RCA Inputs for use from a home audio receiver. Raw wire outputs.
- See more on Amazon...
First Available: 10/28/2015
Brand: Acoustic Audio by Goldwood | Manufacturer: Goldwood Sound, Inc.
Dimensions: 2.25 x 8.50 x 6.00 inches | Weight: 4.50 pounds
See On Amazon #20
Dayton Audio SA100 100W Subwoofer Plate Amplifier
Asin: B0002KRAP6 | Model: SA100 | PartNumber: SA100 | Ean: 0844632015946 | UPC: 844632015946
High And Low Level Inputs/Outputs.
75 Watts Rms @ 8 Ohms, 100 Watts Rms @ 4 Ohms.
Auto On/Off.
Adjustable Low Pass Crossover.
Features
- Low distortion audiophile sound
- Adjustable low pass crossover
- High and low level inputs/outputs
- Auto on/off
- 75 watts RMS @ 8 ohms, 100 watts RMS @ 4 ohms
- See more on Amazon...
Brand: Dayton Audio | Manufacturer: Dayton Audio
Dimensions: 7.48 x 4.72 x 8.66 inches | Weight: 8.32 pounds
Warranty: 5 Years
See On Amazon
Looking For Something Else?
Search