6-3/8" Green Concrete Blade Set (2-Pack with Skid Plate) for Early Entry Cutting, 0.100" Width, Medium Bond
Asin: B08XSKL5VB | Model: GC06100Rx2SP | PartNumber: GC06100Rx2SP | Ean: 0858364007742 | UPC: 858364007742
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Segment Height/Width - 10Mm Segment Height, 0.100" Segment Width.
Use Dry Only - Designed For Dedicated Early Entry Saws.
Compatibility/Bond - Triangular Hole/1" Arbor + Pin Hole & Soft Bond.
Premium Durability - Constructed With Solid Steel Body With 10Mm Laser Welded Segments For Precise Cuts And Prolong Blade Lifetime.
Features
- OPTIMUM DESIGN - designed for early entry cutting of control joints within 2 hours or more after concrete curing
- PREMIUM DURABILITY - constructed with solid steel body with 10mm laser welded segments for precise cuts and prolong blade lifetime
- SEGMENT HEIGHT/WIDTH - 10mm segment height, 0.100 segment width
- COMPATIBILITY/BOND - Triangular hole/1 arbor + pin hole & soft bond
- USE DRY ONLY - designed for dedicated early entry saws
- See more on Amazon...
Brand: EDiamondTools | Manufacturer: EDiamondTools
Dimensions: 6.37 x 6.37 x 0.37 inches
See On Amazon Similar To 63 8 Green Concrete Blade
#1
8 inch Segmented Diamond Saw Blade, Dry or Wet Cutting General Purpose for Concrete Stone Brick Masonry, Arbor, etc. (8")
Asin: B08LSQHFYH | Ean: 7653222974555
Specifications: Segment Height 10Mm. Arbor 7/8"-5/8". Size Is 8"X.085"X.395"/10Mm. Make Chip-Free Cuts That Result In A First-Class Job.
Wet/Dry Use: The Diamond Cup Wheels Can Be Used In Wet Or Dry State, Adding Some Water Give Much More Better Result..
For The Perfect Job Every Time: High Quality And High Performance, This Segmented Circular Saw Blade Perform Better And Longer Than Other Diamond Saw Blades..
High Quality: Made With A Very Fine And Uniform Diamond Grit, Segmented Diamond Saw Blades Perform Excellent Cuts And Nearly Eliminate Chipping On Both The Surface Of The Glass Tile And Its Painted Side..
Features
- FAST AND SMOOTH CUTTING: Designed to provide fast, smooth cutting in a variety of materials, including brick/block, pavers, concrete and stone.
- HIGH QUALITY: Made with a very fine and uniform diamond grit, segmented diamond saw blades perform excellent cuts and nearly eliminate chipping on both the surface of the glass tile and its painted side.
- SPECIFICATIONS: Segment height 10mm. Arbor 7/8-5/8. Size is 8x.085x.395/10mm. Make chip-free cuts that result in a first-class job
- FOR THE PERFECT JOB EVERY TIME: High quality and high performance, this segmented circular saw blade perform better and longer than other diamond saw blades.
- WET/DRY USE: The diamond cup wheels can be used in wet or dry state, adding some water Give Much More Better Result.
- See more on Amazon...
Brand: BEEING | Manufacturer: BEEING
Dimensions: 0.20 x 10.23 x 9.05 inches
See On Amazon #2
VTXMax VSS 8 inch Dry or Wet Cutting General Purpose Power Saw Segmented Diamond Blades for Concrete Stone Brick Masonry (8")
Asin: B081LTN74V | Model: VSS | PartNumber: VSS | Ean: 0858015008692 | UPC: 858015008692
Sintered Diffusion Bonded..
This Diamond Blade Belongs To Vortex Diamond General Purpose Segment Series.
Segment Height 10Mm. Arbor 7/8"-5/8". Size Is 8"X.095"X.395"/10Mm..
Can Be Used Wet Or Dry. For Light Or Medium Duty Cutters..
Features
- Designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
- Can be used wet or dry. For light or medium duty cutters.
- Sintered diffusion bonded.
- Segment height 10mm. Arbor 7/8-5/8. Size is 8x.095x.395/10mm.
- This diamond blade belongs to Vortex Diamond General Purpose Segment Series
- See more on Amazon...
Brand: VTXMAX | Manufacturer: VORTEX DIAMOND INC.
Dimensions: 0.10 x 8.00 x 8.00 inches
See On Amazon #3
Whirlwind USA LSS 8 in. Dry or Wet Cutting General Purpose Power Saw Segmented Diamond Blades for Masonry Brick/Block Pavers Concrete Stone (Factory Direct Sale) (8")
Asin: B06X1BTLVF | Model: FBA_LSS 8 | PartNumber: FBA_LSS 8
Sintered Diffusion Bonded..
This Diamond Blade Belongs To Whirlwind Usa Lighting Series - Lighting General (Segmented Lighting).
Segment Height 10Mm. 14+ Has 15Mm Segment..
Can Be Used Wet Or Dry. For Light Or Medium Duty Cutters..
Features
- Designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
- Can be used wet or dry. For light or medium duty cutters.
- Sintered diffusion bonded.
- Segment height 10mm. 14+ has 15mm segment.
- This diamond blade belongs to Whirlwind USA Lighting Series - Lighting General (Segmented Lighting)
- See more on Amazon...
Brand: WHIRLWIND USA | Manufacturer: WHIRLWIND USA
Dimensions: 0.10 x 8.00 x 8.00 Inches
See On Amazon #4
Delta Diamond Kick-Asphalt 7 Inch Diamond Blade, Segmented, Wet/Dry Cutting Asphalt, Green Concete, Masonry Block, and Similar Materials (7")
Asin: B089ZPCNRW
Deep U Gullets - This Unique Segment/Keyslot Design Allows For Better Air Cooling And Chip Deflection Resulting In Better Performance..
Lifetime Warranty - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws And Grinding Wheels Include A Lifetime Warranty Against Warping, Cracking, And Material Defects. If Any Diamond Tool (Being Used Under Its Intended Use With At Least 50% Wear Left) Fails To Cut Or Work Properly, Or If The Bond Between The Diamond Segment And The Steel Core Becomes Separated At Any Time, The Diamond Tool Will Be Replaced..
Specifications - 7" Diameter X .090 Thick With A Diamond-7/8" Arbor. Also Included Is A 5/8" Bushing. Fits Most Hand-Held Angle Grinders And Circular Saws. Heat-Treated High-Speed Steel Core Is Guaranteed To Withstand The Demands Of Dry Cutting. Expected Blade Life Is Approximately 4,000 Inch Feet (One Inch Foot = 12" Length X 1" Depth). The Recommended Operating Speed Is 5,100 Rpm..
10Mm Segments - 10Mm Tall Diamond Segments Maximize Cutting Life And Provide A Low Cost Per Cut..
Features
- PREMIUM DIAMOND BLADE - Kick-Asphalt uses premium diamond segments and is designed to cut asphalt, green concrete (poured within 72 hours), masonry block, and similar abrasive materials.
- 10MM SEGMENTS - 10MM tall diamond segments maximize cutting life and provide a low cost per cut.
- DEEP U GULLETS - This unique segment/keyslot design allows for better air cooling and chip deflection resulting in better performance.
- SPECIFICATIONS - 7 diameter X .090 thick with a diamond-7/8 arbor. Also included is a 5/8 bushing. Fits most hand-held angle grinders and circular saws. Heat-treated high-speed steel core is guaranteed to withstand the demands of dry cutting. Expected blade life is approximately 4,000 inch feet (one inch foot = 12 length X 1 depth). The recommended operating speed is 5,100 rpm.
- LIFETIME WARRANTY - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking, and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced.
- See more on Amazon...
Brand: DELTA DIAMOND PRODUCTS INCORPORATED | Manufacturer: DELTA DIAMOND PRODUCTS INCORPORATED
See On Amazon #5
ALSKAR DIAMOND USA ADLSS 8 inch Dry or Wet Cutting General Purpose Power Saw Segmented Diamond Blades for Concrete Stone Brick Masonry (8")
Asin: B07DTQK8CP | Model: ADLSS | PartNumber: ADLSS | Ean: 8580150080500
Sintered Diffusion Bonded..
This Diamond Blade Belongs To Alskar Diamond Segmented Lighting Series.
Segment Height 10Mm. Arbor 7/8"-5/8". Size Is 8"X.095"X.395"/10Mm..
Can Be Used Wet Or Dry. For Light Or Medium Duty Cutters..
Features
- Designed to provide fast, smooth cutting in a variety of materials, including brick/block, paves, concrete and stone.
- Can be used wet or dry. For light or medium duty cutters.
- Sintered diffusion bonded.
- Segment height 10mm. Arbor 7/8-5/8. Size is 8x.095x.395/10mm.
- This diamond blade belongs to Alskar Diamond Segmented Lighting Series
- See more on Amazon...
Brand: ALSKAR DIAMOND | Manufacturer: ALSKAR DIAMOND LLC
Dimensions: 0.10 x 8.00 x 8.00 inches
See On Amazon #6
BOSCH DB765SD 7 In. Standard Segmented Rim Diamond Blade with 7/8 In. Diamond Arbor Knockout for Fast Cut Wet/Dry Cutting Applications in Soft Abrasive Material, Asphalt, Green Concrete, Soft Brick
Asin: B0773ZWQVR | Model: DB765SD | PartNumber: DB765SD | Ean: 0000346449020 | UPC: 000346449020
Tensioned Steel Core For Stability.
Consistent Diamond Content And Even Distribution.
Designed To Cut Fast In Soft, Abrasive Materials.
Features
- 7/8 in. Arbor with diamond knockout
- Designed to cut fast in soft, abrasive materials
- Tensioned steel core for stability
- Consistent diamond Content and even distribution
- See more on Amazon...
Brand: BOSCH | Manufacturer: C & J Direct GmbH & Co. KG
Dimensions: 10.20 x 9.20 x 0.20 inches | Weight: 0.80 Pounds
See On Amazon #7
6-3/8" Green Concrete Diamond Saw Blades for Early Entry Cutting - 0.100" Width, Hard Bond
Asin: B07TKD72D9 | Ean: 0727363145802 | UPC: 727363145802
Segment Height/Width - 10Mm Segment Height, 0.100" Segment Width.
Use Dry Only - Designed For Dedicated Early Entry Saws.
Compatibility/Bond - Triangular Hole/1" Arbor + Pin Hole & Hard Bond.
Premium Durability - Constructed With Solid Steel Body With 10Mm Laser Welded Segments For Precise Cuts And Prolong Blade Lifetime.
Features
- OPTIMUM DESIGN - designed for early entry cutting of control joints within 2 hours or more after concrete curing
- PREMIUM DURABILITY - constructed with solid steel body with 10mm laser welded segments for precise cuts and prolong blade lifetime
- SEGMENT HEIGHT/WIDTH - 10mm segment height, 0.100 segment width
- COMPATIBILITY/BOND - Triangular hole/1 arbor + pin hole & hard bond
- USE DRY ONLY - designed for dedicated early entry saws
- See more on Amazon...
Brand: EDiamondTools | Manufacturer: EDiamondTools
See On Amazon #8
Trabo 7 Inch 6-Pack Masonry Segmented Rim Diamond Bond Blade for Cutting Cement, Pavers, Concrete with Rebar, Natural Stone and More, 6 Pieces with 7/8" Arbor with 5/8" Reducer Ring
Asin: B0CB1YMQSD | Ean: 0850054367174 | UPC: 850054367174
Brand: Trabo | Manufacturer: Trabo
See On Amazon #9
8" Skid Plate for Green Concrete Diamond Saw Blades
Asin: B09N7TTBSN | Ean: 0727363148223 | UPC: 727363148223
Simple Attachment - Easily Attaches To Your Green Concrete Diamond Saw Blade.
Features
- SKID PLATE - designed for 8 inch green concrete diamond saw blades
- SIMPLE ATTACHMENT - easily attaches to your green concrete diamond saw blade
- See more on Amazon...
Brand: EDiamondTools | Manufacturer: EDiamondTools
See On Amazon #10
6" Paver Master Diamond Blades for Concrete Pavers, Roofing Tile, and Granite, 8mm Segment Height, Dry or Wet, DM 7/8"-5/8" Quad Holes
Asin: B0CCK6YH9W | Ean: 0702571124597 | UPC: 702571124597
Segment Height - 8Mm Segment Height.
Grinding Method - Use Wet Or Dry.
Arbor Size - 7/8"-5/8" Quad Holes.
Reinforced Segments - Protects The Cross Section Of The Cut Masterial And Increases The Strength Of The Blade Body.
Features
- MULTIPURPOSE - designed for wide range of masonry and concrete materials
- REINFORCED SEGMENTS - protects the cross section of the cut masterial and increases the strength of the blade body
- SEGMENT HEIGHT - 8mm segment height
- ARBOR SIZE - 7/8-5/8 quad holes
- GRINDING METHOD - use wet or dry
- See more on Amazon...
Brand: EDiamondTools | Manufacturer: EDiamondTools
See On Amazon
Looking For Something Else?
Search