Sovol Upgraded Platform 2 Pack, Resin Magnetic Flexible Steel Plate Flex Bed for Anycubic Photon X Mono X Mono X 6K Photon M3 Plus ELEGOO Saturn S SainSmart KL-9 SLA 3D Printer 202 x 128mm
Asin: B08XW13XF4
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.The Magnetic Base Offers Powerful Magnetics, Ensure Perfect Fit With Steel Plate. The Two Easy Lift Tabs(Handles) Make It Easier To Remove The Steel Plate From The Magnetic Base..
The Spare Steel Plate Can Achieve Continuous Printing, Restart Printing Before You Start Cleaning The First, Save Your Time..
!!! Please Clean Up Your Build Plate With Alcohol To Make Sure There Is No Any Resin Or Dust Left On The Surface. The Build Plate Must Be Clean And Dry. And You Need To Stick And Compact The Magnetic Base On Build Plate To Make Sure No Any Bubbles. Otherwise The Magnetic Base Would Peel Off. Please Wait For 72 Hours After Installation And Before Printing. Tips: You Can Use Hair Dryer Blow The Magnetic Base Evenly With Hot Wind For 5-10 Mins After Installation To Increase The Adhesion..
‼Please Adjust The Z Limit Switch After Installation. It Should Be 2.7Mm Higher. That Means The Printing Height Will Be Reduced About 2.7Mm. You Can Print A Spacer To Compensate The Difference. If You Do Not Receive Instrucstions Coming With The Product, Please Refer To The Last 2 Pictures We Listed On The Product Webpage Which Contains Instructions In Details. Any Other Questions Or Issues About The Product Please Feel Free To Contact Us..
Features
- Spring steel plate with high chromium content, easy to bend and clean. Much easier to remove prints and avoid damages during the process, especially for small prints. Good corrossion resistance and prevent rust. Brushed surface provides better adhesion, ensure a perfect print.
- Please adjust the z limit switch after installation. It should be 2.7mm higher. That means the printing height will be reduced about 2.7mm. You can print a spacer to compensate the difference. If you do not receive instrucstions coming with the product, please refer to the last 2 pictures we listed on the product webpage which contains instructions in details. Any other questions or issues about the product please feel free to contact us.
- The magnetic base offers powerful magnetics, ensure perfect fit with steel plate. The two easy lift tabs(handles) make it easier to remove the steel plate from the magnetic base.
- !!! Please clean up your build plate with alcohol to make sure there is no any resin or dust left on the surface. The build plate must be clean and dry. And you need to stick and compact the magnetic base on build plate to make sure no any bubbles. Otherwise the magnetic base would peel off. Please wait for 72 hours after installation and before printing. Tips: You can use hair dryer blow the magnetic base evenly with hot wind for 5-10 mins after installation to increase the adhesion.
- The spare steel plate can achieve continuous printing, restart printing before you start cleaning the first, save your time.
- See more on Amazon...
Brand: Sovol | Manufacturer: Sovol
See On Amazon Similar To Sovol Upgraded Platform 2 Pack
#1
FLASHFORGE Adventurer 5M 3D Printer with Fully Auto Leveling, Max 600mm/s High Speed Printing, 280 C Direct Extruder with 3S Detachable Nozzle, Core XY All Metal Structure, Print Size 220x220x220mm
Asin: B0CH4NYL6J | Model: Adventurer 5M | PartNumber: Adventurer 5M | Ean: 6937120306863
✅ 【Your Smart Choice】 -Offers Rapid Nozzle Changes In 3 Seconds, A High-Flow 32Mm³/S Nozzle For Stable High-Speed Printing With A Quick 35-Second Warm-Up To 200°C, Dual-Sided Pei Platform For Easy Removal, And Multiple Platform Options, It's A Smart And Efficient Choice For Creative Projects..
✅ 【Efficient After-Sales Support】 -All Of Our 3D Printers Provide One Month Free Return And Exchange. Lifetime Technical Support, A One-Year Warranty And Reliable 12-Hour Response Service. At Flashforge, Zero Risk Purchase Is For Every Customer's Smiles..
✅ 【Superior Print Quality And Adaptability】 -Dual-Fan Nozzles, Vibration Compensation, Multiple Nozzle Sizes (0.25, 0.4, 0.6, 0.8Mm), And A 280°C Direct Extruder Cater To Various Materials. From Intricate Details To Rapid Prototypes, Superior Results Are Guaranteed..
✅ 【Swift And Smart Printing 】 -This Printer Excels In Efficiency And Intelligence. Its Core Xy Structure Enables Travel Speeds Of Up To 600Mm/S, Ensuring Rapid Yet Accurate Printing. It Also Supports The Use Of A Mobile App-Flash Maker, Allowing For Remote Real-Time Monitoring Of Print Progress, Adjustment Of Parameters, Receiving Message Alerts, And Other Functionalities. These Features Enable Intelligent Operation, Ensuring Seamless And Uninterrupted Printing..
Features
- One-Click Automatic Printing -Experience the future of 3D printing with the Adventurer 5M Series. Ensure impeccable bed leveling every time you print, without the need for manual adjustments. Effortlessly achieve consistent adhesion and flawless first layers, saving time and eliminating frustration.
- Swift and Smart Printing -This printer excels in efficiency and intelligence. Its Core XY structure enables travel speeds of up to 600mm/s, ensuring rapid yet accurate printing. It also supports the use of a mobile app-Flash Maker, allowing for remote real-time monitoring of print progress, adjustment of parameters, receiving message alerts, and other functionalities. These features enable intelligent operation, ensuring seamless and uninterrupted printing.
- Your Smart Choice -Offers rapid nozzle changes in 3 seconds, a high-flow 32mm /s nozzle for stable high-speed printing With a quick 35-second warm-up to 200 C, dual-sided PEI platform for easy removal, and multiple platform options, it's a smart and efficient choice for creative projects.
- Superior Print Quality and Adaptability -Dual-fan nozzles, vibration compensation, multiple nozzle sizes (0.25, 0.4, 0.6, 0.8mm), and a 280 C direct extruder cater to various materials. From intricate details to rapid prototypes, superior results are guaranteed.
- Efficient After-sales Support -All of our 3d printers provide one month free return and exchange. Lifetime technical support, a one-year warranty and reliable 12-hour response service. At FLASHFORGE, zero risk purchase is for every customer's smiles.
- See more on Amazon...
Brand: FLASHFORGE | Manufacturer: Zhejiang Flashforge 3D Technology Co., Ltd.
Dimensions: 17.64 x 15.83 x 14.29 inches | Weight: 23.80 Pounds
Warranty: A Year
See On Amazon #2
Geeetech GLA10 V2 Upgrade 3D Printer Bed Leveling Tool Electronic Hot Bed Leveling Tools with Indicate Led and Beeper 3D Printer Bed Leveler for All Bed Platform with Anti-Shedding Battery Design
Asin: B0CJNK8LSC
【Time-Saving Leveling】Aim The Nozzle At Gla10 3D Printer Leveler Crosshairs And Adjust The Leveling Nut To Match The Position Of The Nozzle. The Hatchery Is Upgraded When The Green Led On The Gla10 Lights Up And The Buzzer Beep. Pay Attention That The Gla10 Just Lights Up At All Four Corners Of The Hot Bed. You Can Finish The Bed Leveling Within 2 Mins..
【Notice】1. Insert The Attached Cr2032 Battery In The Battery Holder On The Gla10. Please Be Careful Not To Install The Wrong Positive And Negative Poles When Installing The Battery. 2. Please Clean Up The Residual Filament On The Nozzle So As Not To Affect The Leveling Accuracy. 3.If The G-Code We Provided Does Not Apply To Your Hot Bed, Please Contact Us To Get A New G-Code..
【Precise Leveling】No Need To Use A4 Paper To Slide Back And Forth To Leve Hot Bed. There Is A Green Indictor On The Bed Leveler Tool (Gla10). When The Nozzle Contact The Circuit Board, Light Will On. Gla10 Can Make The Bed At The Same Level Quickly And Accurately. More Environmentally Friendly And Easier Than A4 Paper..
【Easy To Use】Perfect For The Beginner, Just Place The Gla10 Bed Leveler Directly Between The Nozzle And The Heated Bed, Adjusting The Nut According To The Indictor Light And The Direction Arrow For Qucik Leveling..
Features
- Upgrade Bed Leveler Geeetech's new version for GLA 10. Add Copper legs for more stability. Add the buzzer, it will beep after the hot bed is leveled. The upgrade metal battery holder, anti-shedding and more durable.
- Easy to use Perfect for the beginner, just place the GLA10 bed Leveler directly between the nozzle and the heated bed, adjusting the nut according to the indictor light and the direction arrow for qucik leveling.
- Time-Saving Leveling Aim the nozzle at GLA10 3d printer leveler crosshairs and adjust the leveling nut to match the position of the nozzle. The hatchery is upgraded when the green LED on the GLA10 lights up and the buzzer beep. Pay attention that the GLA10 just lights up at all four corners of the hot bed. You can finish the bed leveling within 2 Mins.
- Precise Leveling No need to use A4 paper to slide back and forth to leve hot bed. There is a green indictor on the bed leveler tool (GLA10). When the nozzle contact the circuit board, light will on. GLA10 can make the bed at the same level quickly and accurately. More environmentally friendly and easier than A4 paper.
- Notice 1. Insert the attached CR2032 battery in the battery holder on the GLA10. Please be careful not to install the wrong positive and negative poles when installing the battery. 2. Please clean up the residual filament on the nozzle so as not to affect the leveling accuracy. 3.If the G-code we provided does not apply to your hot bed, please contact us to get a new G-code.
- See more on Amazon...
Brand: Geeetech | Manufacturer: Geeetech
See On Amazon #3
Sovol Upgraded 4pcs Aluminum Hand Twist Leveling Nut & 8pcs Heatbed Silicone Leveling Column Mounts for SV01/SV02/SV03/SV04, Ender 3/3 Pro/3 V2, Ender 5/5 Plus/5 Pro, CR-10, CR10S/10S Pro 3D Printer
Asin: B08FQSRCMD | Model: SV-TPXN | PartNumber: SV-TPXN
[More Powerful & More Tightly] - Metal Nut Is More Powerful And Will Twist More Tightly Than Plastic Nuts..
[After Sale Service & Technical Support ] - If You Have Any Issue, Please Kindly Contact Us, We Will Reply As Soon As Possible Within 24 Hours. We Will Offer You Professional Customer Support And Strive Our Best To Offer Your Solutions..
[Easier For Leveling] - The Torque Of These Nuts Is Large, Making It Easier And More Accurate To Level The Hot Bed..
[Durable & Lasting Aluminum] - Made Of High Quality Aluminum, Last Much Longer Than Your Stock Plastic Nuts..
Features
- [Sovol Latest Exclusive Blue Hand Twist Level Nut] - Upgraded replacement part for Ender 3/3 Pro/3 X, Ender 5/5 Plus/ 5 Pro, CR-10, CR-10 V2, CR-10 Max, CR 10, CR-10 Mini, CR-10S, CR 10S Pro,CR-10 Plus, CR-X, CR 20.
- [Durable & Lasting Aluminum] - Made of high quality aluminum, last much longer than your stock plastic nuts.
- [More Powerful & More Tightly] - Metal nut is more powerful and will twist more tightly than plastic nuts.
- [Easier for Leveling] - The torque of these nuts is large, making it easier and more accurate to level the hot bed.
- [After Sale Service & Technical Support ] - If you have any issue, please kindly contact us, we will reply as soon as possible within 24 hours. We will offer you professional customer support and strive our best to offer your solutions.
- See more on Amazon...
Brand: Sovol | Manufacturer: Sovol
See On Amazon #4
Sovol 3D Upgraded Platform 2 Pack, Resin Magnetic Flexible Steel Plate Flex Bed Fits for ANYCUBIC Photon/Photon S/Photon Mono/Photon Mono SE/Qidi Shadow 5.5S SLA 3D Printer 135x80mm
Asin: B08LYP2VTT
The Magnetic Base Offers Powerful Magnetics, Ensure Perfect Fit With Steel Plate. The Two Easy Lift Tabs(Handles) Make It Easier To Remove The Steel Plate From The Magnetic Base..
The Spare Steel Plate Can Achieve Continuous Printing, Restart Printing Before You Start Cleaning The First, Save Your Time..
!!! Please Clean Up Your Build Plate With Alcohol To Make Sure There Is No Any Resin Or Dust Left On The Surface. The Build Plate Must Be Clean And Dry. And You Need To Stick And Compact The Magnetic Base On Build Plate To Make Sure No Any Bubbles. Otherwise The Magnetic Base Would Peel Off. Please Wait For 72 Hours After Installation And Before Printing. Tips: You Can Use Hair Dryer Blow The Magnetic Base Evenly With Hot Wind For 5-10 Mins After Installation To Increase The Adhesion..
‼Please Adjust The Z Limit Switch After Installation. It Should Be 2.7Mm Higher. That Means The Printing Height Will Be Reduced About 2.7Mm. You Can Print A Spacer To Compensate The Difference. If You Do Not Receive Instrucstions Coming With The Product, Please Refer To The Last 2 Pictures We Listed On The Product Webpage Which Contains Instructions In Details. Any Other Questions Or Issues About The Product Please Feel Free To Contact Us..
Features
- Spring steel plate with high chromium content, easy to bend and clean. Much easier to remove prints and avoid damages during the process, especially for small prints. Good corrossion resistance and prevent rust. Brushed surface provides better adhesion, ensure a perfect print.
- Please adjust the z limit switch after installation. It should be 2.7mm higher. That means the printing height will be reduced about 2.7mm. You can print a spacer to compensate the difference. If you do not receive instrucstions coming with the product, please refer to the last 2 pictures we listed on the product webpage which contains instructions in details. Any other questions or issues about the product please feel free to contact us.
- The magnetic base offers powerful magnetics, ensure perfect fit with steel plate. The two easy lift tabs(handles) make it easier to remove the steel plate from the magnetic base.
- !!! Please clean up your build plate with alcohol to make sure there is no any resin or dust left on the surface. The build plate must be clean and dry. And you need to stick and compact the magnetic base on build plate to make sure no any bubbles. Otherwise the magnetic base would peel off. Please wait for 72 hours after installation and before printing. Tips: You can use hair dryer blow the magnetic base evenly with hot wind for 5-10 mins after installation to increase the adhesion.
- The spare steel plate can achieve continuous printing, restart printing before you start cleaning the first, save your time.
- See more on Amazon...
Brand: Sovol | Manufacturer: Sovol
See On Amazon #5
HICTOP Upgraded Metal Leveling Knobs with Hot Bed Springs for Ender 3/3 Pro/3 V2 Ender 5/5 Plus/Pro CR-10 CR10S/10S Pro CR 20 and other Voxelab Sovol 3D Printers
Asin: B092ZSWYKZ | Model: Metal Leveling Nuts with Hot Bed Springs | PartNumber: Metal Leveling Nuts with Hot Bed Springs | Ean: 0649910022131 | UPC: 649910022131
The Adjustment Springs Are A Bit Longer Than The One On The Printer, Which Gave You Some More Adjustment Range For Leveling. The Increased Tension Means Less Slop When Adjusting. The Longer Springs Mean You Will Have To Manually Adjust Your Zstop So That Your Nozzle Doesn't Crash Into Your Bed And Potentially Ruin Both.
3D Printer Spring And Knob Kit Is Suitable For Ender 3/3 Pro/3 V2 Ender 5/5 Plus/Pro Cr-10 Cr10s/10S Pro Cr 20 And Other Voxelab Sovol 3D Printers.
Everything In The 3D Printer Spring And Knob Kit Feels Tighter And Less Wobbly. You Do Not Need To Re-Leveling Near As Often..
The Red Color Ends Some Of The Fumblings By Feel To Locate Them, The Bed Leveling Wheels Are Nice Too, The Knurling Is Nice And Grippy And It's Pretty Easy To Turn Them Too.
Features
- The ender 3 leveling knobs are more substantial than the cheap black plastic ones.
- The red color ends some of the fumblings by feel to locate them, the bed leveling wheels are nice too, the knurling is nice and grippy and it's pretty easy to turn them too
- The adjustment springs are a bit longer than the one on the printer, which gave you some more adjustment range for leveling. The increased tension means less slop when adjusting. The longer springs mean you will have to manually adjust your zstop so that your nozzle doesn't crash into your bed and potentially ruin both
- Everything in the 3d printer spring and knob kit feels tighter and less wobbly. You do not need to re-leveling near as often.
- 3d printer spring and knob kit is suitable for Ender 3/3 Pro/3 V2 Ender 5/5 Plus/Pro CR-10 CR10S/10S Pro CR 20 and other Voxelab Sovol 3D Printers
- See more on Amazon...
Brand: HICTOP | Manufacturer: HICTOP
See On Amazon #6
Glass Printer Bed 235x235x3.8mm Borosilicate Glass 3D Printer Glass Print Platforms for Ender 5/Ender 3/Ender 3 Pro
Asin: B07JKGNB6W | Model: Glass Print bed | PartNumber: Glass Print bed | Ean: 0665268871160 | UPC: 665268871160
【Easy To Clean】Just Wash It Off With Water, Clean With Glass Print Bed Cleaner, Reapply A Thin Layer 3D Printing Solid Glue And Enjoy.No Need Extra Clips Because Of Its Own Material And Thickness.It Won't Take Up Build Area..
【18 Months Warranty】100% Dcreate Genuine Brand New - Original Packaging, Premium Quality. 100% Hassle-Free Replacement Guarantee Within 18 Months Warranty And Replacement For Quality Issue..
【High Quality】 Square Printer Glass Are Safe And Easy To Handle.All Edges Have A Nice Smooth Round Over And There Are No Chips Or Scratches.Fits For The Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5 And Cr-6 Se, Cr-20, Cr-20 Pro，Disway01..
【Worked Perfectly】This Printer Glass Bed Is Amazingly Flat.Smooth Flat Surface Improves The Quality Of Your 3D Printing, For Consistent Results.Thick 3.8Mm Glass Plate Will Not Warp Or Bend Under Heat..
Features
- Borosilicate Glass Based on 100,000 experiment report,this material has Ultra-low thermal expansion,heat resistant and high temperature shock resistance,far better than tempered glass.So borosilicate glass is the best choice for 3d printer.
- Worked Perfectly This Printer Glass bed is amazingly flat.Smooth flat surface improves the quality of your 3D printing, for consistent results.Thick 3.8mm glass plate will not warp or bend under heat.
- Easy to Clean Just wash it off with water, clean with glass print bed cleaner, reapply a thin layer 3d printing solid glue and enjoy.No need extra clips because of its own material and thickness.It won't take up build area.
- High Quality Square printer glass are safe and easy to handle.All edges have a nice smooth round over and there are no chips or scratches.Fits for the Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5 and CR-6 SE, CR-20, CR-20 Pro DISWAY01.
- 18 Months Warranty 100% Dcreate Genuine Brand New - Original packaging, premium quality. 100% hassle-free replacement guarantee within 18 months warranty and replacement for quality issue.
- See more on Amazon...
Brand: Sovol | Manufacturer: DCSW
Dimensions: 0.15 x 9.25 x 9.25 inches | Weight: 1.10 pounds
See On Amazon #7
Sovol SV04 IDEX 3D Printer, Independent Dual Extruder 3D Printer with All Metal Direct Drive 32-bit Silent Motherboard Auto Leveling, Larger Build Volume 300 x 300 x 400mm
Asin: B09MLSSKRD | Model: SV-SV04 | PartNumber: SV-SV04
[Auto Leveling & 32-Bit Tmc2209 Silent Board] - The Automatic Leveling Sensor On The Sv04 Makes Adjustments To Ensure That The Bed And Nozzle Are At An Optimal Distance Throughout The Printing Process, Which Improves Bed Adhesion And Print Quality. If You Have Any Bed Leveling Issues Please Refer To The User Guide And Leveling Guide Video On This Product Page. Upgraded 32-Bit Tmc2209 Silent Board, Up To 7 Additional Drivers, More Functions, More Stable, Super Quiet..
[Fully Upgraded 4.3 Inch Lcd Touchscreen] - The Upgraded Lcd Touch Screen From Sovol Has An Excellent Day/Night Mode And One-Button Control. The Sv04 Touch Screen Can Be Set To Automatically Replace The Filament Without Printing Paused. All Modes Are Clear And Easy To Use. Double Filament Detector Reminds You To Replace Filament, No More Worrying About Long Time Printing..
[Flexible Spring Steel Plate & 500W Power Supply] - The Flexible Magnetic Building Plate Ensures That Your Prints Grips Well To Avoid Deformation And Failed Prints. You Can Peel Off The Prints Without Tools, Just Bend The Plate And Remove Your Prints. Built-In 500W Branded Power Supply Ensures Stable And Sufficient Performance, Fast Heat Hot Bed And Nozzle. It Protects Sv04 From Unexpected Power Surges..
[More Space For Creativity] - Please Download The Latest Firmware For Sv04 From The Official Website Of Sovol Before Starting. Sovol Sv04 Size: 300 X 300 X 400 Mm. Larger Volume Than Sv01/Sv02. Modular Design For Quick Assembly Allows For Faster Start..
Features
- [IDEX 3D Printer with 4 Different Printing Modes] - Sovol SV04 3D printer is equipped with independent dual direct drive metal extruders that allow you to print two different colors, two different materials and two models simultaneously in the same or opposite direction. Better able to produce high-quality prints with a variety of materials such as PLA, ABS, PETG, TPU, PC, PA, wood, ASA and PVA.
- [More Space for Creativity] - Please download the latest firmware for SV04 from the official website of sovol before starting. Sovol SV04 size: 300 x 300 x 400 mm. Larger volume than SV01/SV02. Modular design for quick assembly allows for faster start.
- [Auto Leveling & 32-bit TMC2209 Silent Board] - The automatic leveling sensor on the SV04 makes adjustments to ensure that the bed and nozzle are at an optimal distance throughout the printing process, which improves bed adhesion and print quality. If you have any bed leveling issues please refer to the User Guide and leveling guide video on this product page. Upgraded 32-bit TMC2209 silent board, up to 7 additional drivers, more functions, more stable, super quiet.
- [Flexible Spring Steel Plate & 500W Power Supply] - The flexible magnetic building plate ensures that your prints grips well to avoid deformation and failed prints. You can peel off the prints without tools, just bend the plate and remove your prints. Built-in 500W branded power supply ensures stable and sufficient performance, fast heat hot bed and nozzle. It protects SV04 from unexpected power surges.
- [Fully Upgraded 4.3 inch LCD Touchscreen] - The upgraded LCD touch screen from Sovol has an excellent day/night mode and one-button control. The SV04 touch screen can be set to automatically replace the filament without printing paused. All modes are clear and easy to use. Double filament detector reminds you to replace filament, no more worrying about long time printing.
- See more on Amazon...
Brand: Sovol | Manufacturer: Sovol
Dimensions: 15.75 x 11.81 x 11.81 Inches
Warranty: 1 Year
See On Amazon #8
HICTOP Textured PEI Bed 310 * 320mm Build Plate PEI Sheet and Magnetic Build Plate Adhesive Ender 3 max PEI for CR-10 V2,CR-10 V3,CR-10S pro,CR-X, CR-10 pro V2,Ender 3 max,Ender 3 max Neo 3D Printers
Asin: B09KLFYCQ6 | Model: PEI | PartNumber: PEI
3 Excellent Adhesion Can Be Achieved When The Temperature Of The Heated Bed Is About 60℃, You Can Print Directly On The Hictop Pei Sheet Without Using Any Glue Or Other Tools To Help The Model To Stick Onto The Sheet. You Do Not Need To Worry About The Prints Curling With A 60℃ Bed Temperature.It Also Can Print Petg Very Well, But The Temperature Of The Hotbed Needs To Be About 80-85℃.
5 The Size Of Hictop Pei Sheet Is 310*320Mm（12.2*12.6Inch）, It Is Applicable With Cr-10 V2,Cr-10 V3,Cr-10S Pro, Cr-X, Cr-10 Pro V2, Ender 3 Max, Ender 3 Max Neo Anycubic Kobra Plus 3D Printers.
4 Prints Come Off The Surface Easily When The Temperature Of The Heated Bed Reaches Room Temperature. If The Print Is Still Stuck, Gentle Flexing Of The Plate Will Help Remove It..
2 The Hictop 310*320Mm Pei Is Very Easy To Use, Simply Stick The Magnetic Bottom Sheet Onto Your Heated Bed, Then Place The Steel Platform With Pei Surface On The Top. The Maximum Temperature For Printing Is 130℃ On The Bed..
Features
- 1 The HICTOP 310*320mm pei bed is combined with 2 parts, a flexible steel platform coated with textured PEI on one side and a magnetic bottom sheet with adhesive on the back. The PEI comes pre applied.
- 2 The HICTOP 310*320mm pei is very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130 on the bed.
- 3 Excellent adhesion can be achieved when the temperature of the heated bed is about 60 , you can print directly on the HICTOP PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60 bed temperature.It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85
- 4 Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it.
- 5 The size of HICTOP pei sheet is 310*320mm 12.2*12.6inch , it is applicable with CR-10 V2,CR-10 V3,CR-10S pro, CR-X, CR-10 pro V2, Ender 3 max, Ender 3 max Neo Anycubic Kobra Plus 3D printers
- See more on Amazon...
Brand: HICTOP | Manufacturer: HICTOP
See On Amazon #9
Sovol SV01pro 2023 Flexible Steel Platform, One Side Textured PEI Surface, Another Side Build Surface Sticker Sheet, Coming with Magnetic Bottom Sheet for Sovol SV01 SV01 pro SV02 3D Printer
Asin: B08LYM1QW9 | Model: SV-SVGB | PartNumber: SV-SVGB
Sovol Double Sided Flexible Platform Is Very Easy To Use, Simply Stick The Magnetic Bottom Sheet Onto Your Heated Bed, Then Place The Steel Platform With Any One Side On The Top. The Maximum Temperature For Printing Bed Is 120℃..
Prints Come Off The Surface Easily When The Temperature Of The Heated Bed Reaches Room Temperature. If The Print Cannot Be Removed, Gentle Flexing Of The Plate Will Help To Remove It..
Excellent Adhesion Can Be Achieved When The Temperature Of The Heated Bed Is About 60℃, You Can Print Directly On Each Side Of The Platform Without Using Any Glue Or Other Tools To Help The Model To Stick Onto The Surface. You Do Not Need To Worry About The Prints Curling With A 60℃ Bed Temperature. It Also Can Print Petg Very Well, But The Temperature Of The Hotbed Needs To Be About 80-85℃..
Sovol Double Sided Flexible Platform Is Combined With 2 Parts, A Flexible Steel Platform Coated With Textured Pei Surface On One Side, A Build Surface Sticker On The Other Side And A Magnetic Bottom Sheet With Adhesive On The Back..
Features
- The size of Sovol double sided platform is 255*300mm, it is applicable with Sovol SV01pro, SV01, SV02 3D printer. Different materials of double sides fit for printing different filaments, which brings you unique printing experience.
- Sovol double sided flexible platform is combined with 2 parts, a flexible steel platform coated with textured PEI surface on one side, a build surface sticker on the other side and a magnetic bottom sheet with adhesive on the back.
- Sovol double sided flexible platform is very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with any one side on the top. The maximum temperature for printing bed is 120 .
- Excellent adhesion can be achieved when the temperature of the heated bed is about 60 , you can print directly on each side of the platform without using any glue or other tools to help the model to stick onto the surface. You do not need to worry about the prints curling with a 60 bed temperature. It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85 .
- Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print cannot be removed, gentle flexing of the plate will help to remove it.
- See more on Amazon...
Brand: Sovol | Manufacturer: Sovol
See On Amazon #10
Luminate 3D Printer Build Surface Plate Upgrade (235x235x1.5) G10 Garolite, FR4 High Temp Materials, Quick Release, Smooth Surface PETG ABS PLA TPU PEEK PEKK ULTEM CF VAAPR
Asin: B0CY3RM8H9 | Model: G10-FR4-12 | PartNumber: G10-FR4-12
For 235X235: Ender 3 Series, Biqu B1, Elegoo Neptune Series..
Long-Lasting Reliability: Luminate3d Print Beds Are Built To Last, Resistant To High Temperatures And Harsh Chemicals, Ensuring Your Printing Surface Remains Consistent Print After Print..
Enhanced Adhesion & Release: Experience Effortless Print Adhesion Without Warping, Thanks To Our Specially Formulated G10/Fr4 Surface. Post-Printing, Models Release Smoothly, Preserving Intricate Details..
Optimal Thickness: At 2Mm Thick, Our Black G10/Fr4 Print Beds Provide The Perfect Balance Of Rigidity And Minimal Thermal Expansion, Ensuring Consistent Print Quality Across Various Sizes..
Features
- High Performance: Upgrade your 3D printing experience with Luminate3D's premium G10/FR4 print bed, designed for unparalleled durability, heat resistance, and precision printing.
- Optimal Thickness: At 2mm thick, our black G10/FR4 print beds provide the perfect balance of rigidity and minimal thermal expansion, ensuring consistent print quality across various sizes.
- For 235x235: Ender 3 series, BIQU B1, Elegoo Neptune series.
- Enhanced Adhesion & Release: Experience effortless print adhesion without warping, thanks to our specially formulated G10/FR4 surface. Post-printing, models release smoothly, preserving intricate details.
- Long-Lasting Reliability: Luminate3D print beds are built to last, resistant to high temperatures and harsh chemicals, ensuring your printing surface remains consistent print after print.
- See more on Amazon...
Brand: Luminate3D | Manufacturer: Luminate3D
Dimensions: 0.06 x 9.25 x 9.25 inches | Weight: 0.34 Pounds
See On Amazon
Looking For Something Else?
Search