4 PCS Wall Flange outer diameter flange Easy Installation Plastic Radiator Escutcheon Water Pipe Drain Line Cover Collar Wall Pipe Cover Decoration Pipe Collars,Pipe Collar (20mm, White)
Asin: B08YF1HVTJ | Model: 2024 | PartNumber: 2024 | Ean: 4823332742945
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.The Suitable Pipe Diameter Is: 20Mm/0.79Inch.
Note: The Product Is Made Of Plastic. This Is Difficult When The Temperature Is Too Low. When Installing, Please Use Hot Water Or Other Methods To Make It Hot And Soft Before Installation..
Widely Used In Heating Pipes, Water Pipes, Gas Pipes, Angle Valves, Faucets, Radiators, Drain Pipes, Etc..
The Installation Is Very Simple, There Is No Need To Drain Or Disconnect The Pipe, Just Fasten The Buckle To Complete The Installation, And It Only Takes A Few Seconds To Cover The Ugly Surface..
Features
- When the pipe passes through the wall, it leaves an unsightly surface. Masked collar. Plastic made of high toughness polymers. There is no need to worry about pipe ring breakage during installation. The shape of the ring will not be deformed after installation.
- The installation is very simple, there is no need to drain or disconnect the pipe, just fasten the buckle to complete the installation, and it only takes a few seconds to cover the ugly surface.
- The suitable pipe diameter is: 20mm/0.79inch
- Widely used in heating pipes, water pipes, gas pipes, angle valves, faucets, radiators, drain pipes, etc.
- Note: The product is made of plastic. This is difficult when the temperature is too low. When installing, please use hot water or other methods to make it hot and soft before installation.
- See more on Amazon...
Brand: shenghang | Manufacturer: shenghang
Dimensions: 1.00 x 1.00 x 1.00 inches | Weight: 0.01 Pounds
See On Amazon Similar To 4 PCS Wall Flange outer
#1
Oatey 3 in. or 4 in. PVC Closet Flange with Plastic Ring without Test Cap, White
Asin: B000H5VPDY | Model: 43503 | PartNumber: 43503 | Ean: 0038753435039, 0696505020560, 0783961161453 | UPC: 783961161453, 696505020560, 038753435039
Patented Bolt Slot Shelf Eliminates Bolt Fall Through.
Solvent Welds Inside Of 4-Inch Or Over 3-Inch Schedule 40 Dwv Pipe.
Flange Sits Flush With The Floor And Can Hold Head Pressure Up To 30 Feet.
The Metal Ring Provides Added Strength And Cracking Resistance To The Flange And Can Be Rotated To Allow Precise Alignment Of Bolts And Screws.
Patented Alignment Indicators Provide An Easy Visual When Setting Flange.
Fits Over 3 In. Or Inside 4 In. Pvc Pipe.
Features
- Level Fit toilet flange with plastic molded ring
- Fits over 3 in. or inside 4 in. PVC pipe
- Patented bolt slot shelf eliminates bolt fall through
- Patented alignment indicators provide an easy visual when setting flange
- Flange sits flush with the floor and can hold head pressure up to 30 feet
- The metal ring provides added strength and cracking resistance to the flange and can be rotated to allow precise alignment of bolts and screws
- Solvent welds inside of 4-Inch or over 3-Inch Schedule 40 DWV pipe
- See more on Amazon...
First Available: 10/01/2019
Brand: Oatey | Manufacturer: Oatey
Dimensions: 3.00 x 7.00 x 7.00 Inches | Weight: 0.20 pounds
Warranty: 1-year limited
See On Amazon #2
Oatey GIDDS-173390 43539 Replacement Flange Forcast Iron, 4 Inch, PVC
Asin: B000DZHDQG | Model: GIDDS-173390 | PartNumber: GIDDS-173390 | Ean: 0038753435398, 0752913177514, 7048202587342 | UPC: 038753435398, 752913177514
Made In United States.
No Need To Tear Up Existing Floor.
Smooth Unrestricted Flow Design.
Replaces Broken Cast Iron Closet Flanges.
Installs Easily Without Tools.
No Need To Tear Up Existing Floor.
Replaces Broken Cast Iron Closet Flanges.
Installs Easily Without Tools.
Easily Fits And This Is Easy To Install.
Features
- This PVC plastic compression closet flange is a replacement for a cast-iron flange. It fits into 4-inch pipes with 3-inch stainless steel bolts.
- Easily fits and this is easy to install
- Made in United States
- Replaces broken cast iron closet flanges
- Installs easily without tools
- No need to tear up existing floor
- Smooth unrestricted flow design
- Replaces broken cast iron closet flanges
- Installs easily without tools
- No need to tear up existing floor
- Smooth unrestricted flow design
- See more on Amazon...
Brand: Oatey | Manufacturer: Oatey
Dimensions: 3.60 x 6.70 x 6.70 inches | Weight: 0.84 pounds
Warranty: 1-year limited
See On Amazon #3
2 PCS 304 Stainless Steel Deck Flanges for 1.5" Aboves Ground Pool Ladders and Handrails Closet Rod Flange White
Asin: B0BVTS2RZX | Model: HZ-Deck Flange | PartNumber: HZ-Deck Flange
304 Stainless Steel Deck Flanges: Our Pool Ladder Replacement Deck Flange Is Made Of 304 Stainless Steel With Strong And Sturdy Construction, Have Bigger Strong Bearing Capacity And Not Prone To Rust. White Paint On The Surface, Waterproof And Anti-Oxidation..
Wide Application: The Rod Flange Suitable For Aboves Ground Pool Ladders, Wardrobe, Closet, Etc. You Can Use Them To Adjust And Fix The Rod, Which Is Convenient For Hanging, Bringing You A Lot Of Convenience And Practicality..
Easy To Install: The Deck Flange Can Be Directly Screwed To The Wardrobe, Pool Handrail Wall, Ceiling Or Other Places, With Better Reliability And Stability..
Package Include: You Will Receive 2 Packs Of Stainless Steel Deck Flanges Set. And The Mounting Hardware Includes 6 X 304 Stainless Steel Ground Screws, 4 X Short Ground Screws, 6 X Anchors, 6 X Washers, And 6 X Open Washers..
Features
- Dimensions: Each deck flange is suitable for 38mm/1.5inch aboves ground pool ladders. Please measure the rod or pole you already have at home before place the order.Dimensions
- Package Include: You will receive 2 packs of stainless steel deck flanges set. And the mounting hardware includes 6 x 304 stainless steel ground screws, 4 x short ground screws, 6 x anchors, 6 x washers, and 6 x open washers.
- 304 Stainless Steel Deck Flanges: Our pool ladder replacement deck flange is made of 304 stainless steel with strong and sturdy construction, have bigger strong bearing capacity and not prone to rust. White paint on the surface, waterproof and anti-oxidation.
- Easy to install: the deck flange can be directly screwed to the wardrobe, pool handrail wall, ceiling or other places, with better reliability and stability.
- Wide Application: The rod flange suitable for aboves ground pool ladders, wardrobe, closet, etc. You can use them to adjust and fix the rod, which is convenient for hanging, bringing you a lot of convenience and practicality.
- See more on Amazon...
Brand: YUNVI | Manufacturer: YUNVI
Dimensions: 2.56 x 1.50 x 4.99 Inches
See On Amazon #4
DGHAOP Dryer Vent Wall Plate 4Inch/100mm ABS Plastic Air Duct Connector Flange Panel Duct Connector Flange Inlet Fitting for Ventilation Straight Pipe, Wall and Ceiling (Square to Round)
Asin: B09G6F7GCQ | Model: DVWPPADC-4IN-1 | PartNumber: DVWPPADC-4IN-1 | Ean: 0729388707973 | UPC: 729388707973
The Size Is: The Diameter Of The Round Hole Is About 9Cm/3.5In, The Outer Diameter Of The Bottom Circle Is About 10Cm/4In, And The Square Size Is 120X120mm/4.7X4.7Inch..
Wide Range Of Applications-Our Duct Flange To Wall Dryer Exhaust Is Very Suitable For Conveying Tumble Dryers, Bathroom Or Kitchen Exhaust Fans And Many Other Indoor/Outdoor Ventilation Systems..
The Product Installation Is Also Very Convenient, Just Screw In The Screws From The Four Holes Of The Wall Plate To Complete. Notice! There Are No Screws In The Product..
The Connector Is Made Of High-Quality Abs Plastic, With High Toughness And Wear Resistance..
Features
- Our black 4-inch air duct plastic connector flanges are of high quality, which can better help you to replace or install.
- The connector is made of high-quality ABS plastic, with high toughness and wear resistance.
- The size is: the diameter of the round hole is about 9cm/3.5in, the outer diameter of the bottom circle is about 10cm/4in, and the square size is 120x120mm/4.7x4.7inch.
- The product installation is also very convenient, just screw in the screws from the four holes of the wall plate to complete. Notice! There are no screws in the product.
- Wide range of applications-Our duct flange to wall dryer exhaust is very suitable for conveying tumble dryers, bathroom or kitchen exhaust fans and many other indoor/outdoor ventilation systems.
- See more on Amazon...
Brand: DGHAOP | Manufacturer: DGHAOP
See On Amazon #5
Rrina 4Pcs 304 Stainless Steel Wall Split Flange Round Escutcheon Plate Cover for Various Pipes (22mm/087in)
Asin: B09MC39HNQ | Ean: 0721618133132 | UPC: 721618133132
Suitable For: Heating Pipes, Gas Pipes, Water Pipes, Radiators, Angle Valves, Faucets, Drain Pipes, Etc..
Notice: Before Placing An Order, Please Confirm Whether The Size Is Appropriate, A Variety Of Different Size, And Choose The Most Suitable Size. It Is Not Suitable For Walls With Too Much Dust And Walls That Are Easy To Fall Off..
Install Using: When The Pipe Passes Through The Wall, It Will Leave An Unsightly Surface. It Can Be Used To Decorate The Product With A Pipe Cover. There Is A Self-Adhesive Tape On The Back, Which Can Be Directly Attached To The Wall. It Is Easy To Install Without Removing The Existing Valve..
Packing Quantity: 4Pcs Flange Escutcheon Plate For Pipe Diameter: 22Mm / 0.87"; Total Size: 66X22x6mm / 2.6"X0.87"X0.24"(Outer D X Inner D X T)..
Features
- MATERIAL: Made of high-quality stainless steel construction with polishing surface treatment, not easy to rust, Anti-moisture, Anti-oxiclation, corrosion resistant, acid/alkali resistance for indoor and outdoor use.
- PACKING QUANTITY: 4Pcs flange escutcheon plate for pipe diameter: 22mm / 0.87; Total Size: 66x22x6mm / 2.6x0.87x0.24(Outer D x Inner D x T).
- SUITABLE FOR: Heating pipes, gas pipes, water pipes, radiators, angle valves, faucets, drain pipes, etc.
- INSTALL USING: When the pipe passes through the wall, it will leave an unsightly surface. It can be used to decorate the product with a pipe cover. There is a self-adhesive tape on the back, which can be directly attached to the wall. It is easy to install without removing the existing valve.
- NOTICE: Before placing an order, please confirm whether the size is appropriate, a variety of different size, and choose the most suitable size. It is not suitable for walls with too much dust and walls that are easy to fall off.
- See more on Amazon...
Brand: Rrina | Manufacturer: Rrina
Weight: 0.22 pounds
See On Amazon #6
Eyourlife 20 PCS Colostomy Bags, Ostomy Bag Colostomy Supplies, One Piece Drainable Pouches with Clamp Closure for Ileostomy Stoma Care, Hydrocolloid & Non-Woven Border, Cut-to-Fit 15-65MM
Asin: B07X2S6J1W | Ean: 0731055324260 | UPC: 731055324260
【Odorless】Our One-Piece Drainage Bags Are More Economical And Reliable Than The Two-Piece Ones. With The Complete Airtight, One-Piece Bags Will Leak No Odor Through The Joint And Will Be Easier And Cheaper To Empty The Bag Rather Than Replace A New Wafer And A New Bag..
【Emergency Backup】Will Work When You Need One. You May Store One In The Carryon When Travelling Or In Your Desk At Work In Case You Have An Emergency And Need A Quick Fix. It Will Be Very Helpful In Emergency Situations. Colonoscopy Bags.
【Transparent】With Transparent But Strong Plastic In The Front And Non-Woven Fabric In The Back, It Is Easier To Know When To Empty The Drainable Pouch. By 0.5 Dollar Per Day, Make Your Life More Carefree..
【With 20 Sealing Strips】20 Ostomy Colostomy Bags Come With 20 Sealing Clip Strips. Use The Clip To Close The Bag. With Good Preparation These Bags Will Stay On For 3 Days With Out Leakage. No More Worries About The Clip Wearing Out After A Few Replacements And Air Releases..
Features
- Cut to Fit In order to be applicable to everyone, our colonoscopy bags are designed with cut to fit barrier which apply to the stoma sizes from 0.51 inches (15mm) to 2.56 inches (65mm). You can use the stoma aperture measurement board in package to measure your size. A manual will come in the package to help.
- With 20 Sealing Strips 20 ostomy colostomy bags come with 20 sealing clip strips. Use the clip to close the bag. With good preparation these bags will stay on for 3 days with out leakage. No more worries about the clip wearing out after a few replacements and air releases.
- Odorless Our one-piece drainage bags are more economical and reliable than the two-piece ones. With the complete airtight, one-piece bags will leak no odor through the joint and will be easier and cheaper to empty the bag rather than replace a new wafer and a new bag.
- Transparent With transparent but strong plastic in the front and non-woven fabric in the back, it is easier to know when to empty the drainable pouch. By 0.5 dollar per day, make your life more carefree.
- Emergency Backup Will work when you need one. You may store one in the carryon when travelling or in your desk at work in case you have an emergency and need a quick fix. It will be very helpful in emergency situations. Colonoscopy bags
- See more on Amazon...
Brand: Eyourlife | Manufacturer: Eyourlife
Weight: 536.00 Grams
See On Amazon #7
Hon&Guan 4 Flange, Dust Collection Fittings Dryer Vent Wall Plate Collection Fittings for Heating Cooling Ventilation Vent System-2PCS.
Asin: B0BWDKV1Y9 | Model: PM158 | PartNumber: PM158
【High Effect】Dryer Dock The Original Dryer Vent Quick Release, Plastic Pipe Flange Connected With The Dryer Vent Hose, It Can Help To Drain The Bad Air From The Wall Or Other Places To Ensure Fresh Air..
【Customer Service】Hon&Guan Always Provides You With Premium Equipments And Service. 30-Day Money-Back Guarantee..
【Application】Perfectly Suited For Ducting Your Tumble Dryer, Bathroom Or Kitchen Extractor Fan, Hydroponics, In-Line Extract Fans, Or Cooker Hood..
【High Quality】Hon&Guan 4 Pvc Cap Is Make Of High Quality Abs, Compact And Solid. Perfectly Designed For Diy And Trade, Is Designed To Attach Easily And Securely To Machines For Connecting To Dust Collection Systems..
Features
- EASY TO INSTALL Dig holes of corresponding caliber on the wall, ceiling or any other surface, fix the 4 inch pvc flange, connect it with the ducting, and fix it with the attached clamps. Actual outside diameter: 97mm.
- HIGH QUALITY Hon&Guan 4 pvc cap is make of high quality ABS, compact and solid. Perfectly designed for DIY and trade, is designed to attach easily and securely to machines for connecting to dust collection systems.
- HIGH EFFECT Dryer dock the original dryer vent quick release, plastic pipe flange connected with the dryer vent hose, it can help to drain the bad air from the wall or other places to ensure fresh air.
- APPLICATION Perfectly suited for ducting your tumble dryer, bathroom or kitchen extractor fan, hydroponics, in-line extract fans, or cooker hood.
- CUSTOMER SERVICE Hon&Guan always provides you with premium equipments and service. 30-day money-back guarantee.
- See more on Amazon...
Brand: Hon&Guan | Manufacturer: Hon&Guan
Dimensions: 2.30 x 5.50 x 3.90 inches
See On Amazon #8
Oatey 43538 4-inch Black ABS Cast Iron Closet Flange Replacement
Asin: B001D9QN8A | Model: 43538 | PartNumber: 43538 | Ean: 0038753435381 | UPC: 038753435381
3 Stainless-Steel Bolts Compress The Rubber Gasket To Secure The Flange To The Existing Piping.
Installs Easily Without Tools.
No Need To Tear Up Existing Floor.
Durable Plastic Construction For Long-Lasting Use.
Replaces Broken Cast Iron Closet Flanges.
Compression Joint Provides Up To 3 In. Of Adjustment To The Riser.
Smooth Unrestricted Flow Design.
Rubber Compression Gasket Enables Flange To Be Used On Many Types Of Cast-Iron Piping.
Features
- Replaces broken cast iron closet flanges
- Rubber compression gasket enables flange to be used on many types of cast-iron piping
- 3 stainless-steel bolts compress the rubber gasket to secure the flange to the existing piping
- Compression joint provides up to 3 in. of adjustment to the riser
- Durable plastic construction for long-lasting use
- Replaces broken cast iron closet flanges
- Installs easily without tools
- No need to tear up existing floor
- Smooth unrestricted flow design
- See more on Amazon...
Brand: Oatey | Manufacturer: Oatey
Dimensions: 5.00 x 12.99 x 7.99 inches
Warranty: 1-year limited
See On Amazon #9
Tsnamay 2 Pcs Wall Split Flange, ABS Round Self-Adhesive Escutcheon Plate Buckles Design for 1"/26mm Diameter Pipe
Asin: B0C5ZZ7DLS
🔷Widely Used In Heating Pipes, Water Pipes, Gas Pipes, Angle Valves, Faucets, Radiators, Drain Pipes, Etc..
🔷Package Includes：2 Pack Of Wall Split Flange Fit Pipe Diameter: 1"/26Mm.
🔷There Is Auxiliary Buckles Design, More Stable，And Self-Adhesive Tape On The Back Of The Product, Which Can Be Directly Attached To The Wall..
Material: Made Of Abs, Hard And Non Fragile, Matte Surface, Resistant To Water Spots, Fading And Fingerprints..
Features
- Suitable for tube diameter: 1"/26mm; Wall Split Flange outer diameter 3.34"/85mm; inner hole diameter 1.1"/28mm
- Material: Made of ABS, hard and non fragile, matte surface, resistant to water spots, fading and fingerprints.
- Widely used in heating pipes, water pipes, gas pipes, angle valves, faucets, radiators, drain pipes, etc.
- There is auxiliary buckles design, more stable and self-adhesive tape on the back of the product, which can be directly attached to the wall.
- Package Includes 2 Pack of Wall Split Flange Fit Pipe Diameter: 1/26mm
- See more on Amazon...
Brand: Tsnamay | Manufacturer: Tsnamay
See On Amazon #10
ZRM&E Plastic Air Duct Connector Flange Panel 4" Dryer Vent Wall Plate Plastic Duct Connector Flange for Ventilation Straight Pipe, Wall and Ceiling
Asin: B095GLM35K | Model: PADCFP-4IN-1 | PartNumber: PADCFP-4IN-1 | Ean: 0729388255498 | UPC: 729388255498
Side Length: 115Mm; Hole Diameter: 100Mm.
Our Duct Flange To Wall Dryer Vents Are Ideal For Conveying Roller Dryers, Bathroom Or Kitchen Exhaust Fans And Many Other Indoor / Outdoor Ventilation Systems.
The Installation Of The Product Is Also Very Convenient. Just Screw In The Screws From The Four Holes Of The Wallboard. Be Careful! There Is No Screw In The Product.
The Connector Is Made Of High Quality Abs Plastic With High Toughness And Wear Resistance. Anti Condensation.
Features
- Our white 4" duct plastic connector flange is of high quality, which can help you to replace or install
- The connector is made of high quality ABS plastic with high toughness and wear resistance. Anti condensation
- Side length: 115mm; Hole diameter: 100mm
- The installation of the product is also very convenient. Just screw in the screws from the four holes of the wallboard. be careful! There is no screw in the product
- Our duct flange to wall dryer vents are ideal for conveying roller dryers, bathroom or kitchen exhaust fans and many other indoor / outdoor ventilation systems
- See more on Amazon...
Brand: ZRM&E | Manufacturer: DGHP
See On Amazon #11
Oatey 4 in. PVC Twist-N-Set Closet Flange
Asin: B0002YU3YM | Model: 43651 | PartNumber: 43651 | Ean: 0756655379533, 5915903709378, 0696505051946, 0038753436517, 0784497983083, 0733353685517 | UPC: 038753436517, 784497983083, 756655379533, 696505051946, 733353685517
Installs Easily Without Tools.
Longer Length To Allow For Pipes Cut Short.
Gasket Expands To Fit Service Weight, Heavy Weight And No Hub.
Gasket Expands To Fit Inside Service Weight, Heavy Weight And No Hub Pipe.
Solvent Welds Inside Of 4-Inch Or Over 3-Inch Schedule 40 Dwv Pipe.
Smooth Unrestricted Flow Design.
Installs Inside 4 In. Pipe.
Features
- Replaces broken cast iron toilet flanges
- Installs inside 4 in. pipe
- Installs easily without tools
- Smooth unrestricted flow design
- Gasket expands to fit inside service weight, heavy weight and no hub pipe
- Solvent welds inside of 4-Inch or over 3-Inch Schedule 40 DWV pipe
- Longer length to allow for pipes cut short
- Gasket expands to fit service weight, heavy weight and no hub
- See more on Amazon...
Brand: Oatey | Manufacturer: Oatey
Dimensions: 4.00 x 6.90 x 6.90 inches | Weight: 0.50 pounds
Warranty: 1-year limited
See On Amazon #12
Duct Connector Flange 4 inch by Wadoy, 4 Pack ABS Quality Air Conditioner Exhaust Hose Flange Wall Mount for Heating Cooling Ventilation HVAC System
Asin: B09P149DL3
▶High Quality: Made Of New Quality Abs Material, High Strength, Corrosion Resistance. Long-Lasting To Use..
▶For Any Reason You Are Not Completely Satisfied, You Can Ask For A Replacement Or Full Refund..
▶Package Include: 4 Pcs 4 Inch Duct Connectors. Simple Design, Easy To Install..
▶Widely Application: Application For Fresh Air Ventilation Dust Connector. Suitable For Conveyor Drum Dryers, Bathroom Or Kitchen Exhaust Fans, Hydroponic, In-Line Extract Fans Or Range Hoods..
Features
- Function: For connection between pipe ends. 4 straight pipe flange ventilation ducting connector.
- Widely Application: Application for fresh air ventilation dust connector. Suitable for conveyor drum dryers, bathroom or kitchen exhaust fans, hydroponic, in-line extract fans or range hoods.
- High Quality: Made of new quality ABS material, high strength, corrosion resistance. Long-lasting to use.
- Package Include: 4 Pcs 4 inch Duct Connectors. Simple design, easy to install.
- For any reason you are not completely satisfied, you can ask for a replacement or full refund.
- See more on Amazon...
Brand: Wadoy | Manufacturer: Wadoy 4 inch Duct Connector Flange
See On Amazon #13
LMioEtool ABS Plastic Dustproof Waterproof IP65 Junction Box Hinged Shell Universal Electrical Project Enclosure Gray, with PC Transparent Clear Cover 5.9 x 3.9 x 2.8inch(150 x100 x70mm)
Asin: B07PK8K8S2 | Model: lm202205201502_P10 | PartNumber: lm202205201502_P10 | Ean: 0714453117665 | UPC: 714453117665
The Enclosure Box Features Two Or Three Plastic Latches For Added Security And Locking; Moisture Proof, Sunscreen, Anti-Corrosion, Durable For Years Use..
Outer Size(Approx.):5.9" X 3.9" X 2.8"/150Mmx100mmx70mm (L*W*H); Inner Size(Approx.): 5.2" X 3.2" X 2.6"/132Mm X 82Mm X 65Mm(L*W*H)- -* Tips: In Order To Confirm The Detailed Installation Dimensions, Please Refer To Our Detail Image, Which Shows Specific Internal Dimensions Of The Product. (Allowable Error: 2Mm)..
This Electrical Junction Box Is Easy To Operate And Repair, No Cable Cutting, More Convenient..
Material: Abs,Pc ; Net Weight: 180G; Main Color: Light Gray (For Box Body), Transparent（For Box Cover）.
Features
- Product Name : Junction box; Waterproof rating : IP65.
- Material: ABS,PC ; Net Weight: 180g; Main Color: Light Gray (For Box Body), Transparent For box cover
- The Enclosure box features two or three plastic latches for added security and locking; moisture proof, sunscreen, anti-corrosion, durable for years use.
- This electrical junction box is easy to operate and repair, no cable cutting, more convenient.
- Outer Size(Approx.):5.9 x 3.9 x 2.8/150mmx100mmx70mm (L*W*H); Inner Size(Approx.): 5.2 x 3.2 x 2.6/132mm x 82mm x 65mm(L*W*H)- -* Tips: in order to confirm the detailed installation dimensions, please refer to our detail image, which shows specific internal dimensions of the product. (Allowable Error: 2mm).
- See more on Amazon...
Brand: LMioEtool | Manufacturer: LMioEtool
Dimensions: 2.80 x 5.90 x 4.30 Inches
See On Amazon #14
4 Inch Duct Flange by Vent Works - Metal Wall Plate Kit Connector Easily Accepts Dryer Vent Hose - Galvanized HVAC Fitting Fits Any 4in Round Ducting Including Flexible, Semi Rigid or Solid Pipe
Asin: B0BR76424F | Model: 4 Inch Duct Flange | PartNumber: 4 Inch Duct Flange | Ean: 0760999895062 | UPC: 760999895062
Multi-Purpose - Ideal For Hvac, Diy Projects, Duct Collection, And Heat-Rated Applications, Connect Ducts, Elbows, And Other Ducting Components With Ease..
Hassle Free Returns – Shop With Confidence Knowing That If For Any Reason You’Re Not 100% Satisfied With Your Purchase, Simply Return It For A Hassle-Free Refund..
Proudly Made In Usa - Manufactured With Pride In The Usa Using Locally Sourced Materials. Supporting American Jobs And Ensuring Top-Notch Workmanship And Quality Materials..
Long Lasting Metal Construction - Made With Galvanized Steel That’S Resistant To Rust And Corrosion, This Connector Is Built To Last And Provide Reliable Performance For Years To Come..
Quickly Mount With Ease - Mount The 4 Inch Duct Flange With Ease And Security Thanks To Its Oversized Pilot Holes And Wide Enough Flange Width. Use Bolts, Lags, Or Heavy-Duty Screws For A Hassle-Free And Secure Connection To Your Desired Surface..
Features
- EASILY ATTACH ROUND DUCT - Unlike plastic flanges on the market that claim to be 4 inch but aren t even close, this duct connector flange has a true diameter of just under 4 inches so it easily fits most ducting, including solid rigid pipe, semi-rigid, and even the flexible ducting that runs small.
- QUICKLY MOUNT WITH EASE - Mount the 4 inch duct flange with ease and security thanks to its oversized pilot holes and wide enough flange width. Use bolts, lags, or heavy-duty screws for a hassle-free and secure connection to your desired surface.
- MULTI-PURPOSE - Ideal for HVAC, DIY projects, duct collection, and heat-rated applications, Connect ducts, elbows, and other ducting components with ease.
- LONG LASTING METAL CONSTRUCTION - Made with galvanized steel that s resistant to rust and corrosion, this connector is built to last and provide reliable performance for years to come.
- HASSLE FREE RETURNS Shop with confidence knowing that if for any reason you re not 100% satisfied with your purchase, simply return it for a hassle-free refund.
- PROUDLY MADE IN USA - Manufactured with pride in the USA using locally sourced materials. Supporting American jobs and ensuring top-notch workmanship and quality materials.
- See more on Amazon...
Brand: ventworks | Manufacturer: Vent Works
See On Amazon #15
Duct Connector Flange - 4 Inch Ducting - Galvanized Steel - Straight or Flex Pipe Flange for Heating, Cooling, Air Ventilation Systems
Asin: B0CGJM2XTC | Ean: 4751038506533
Easy Installation: Compatible With Round ⌀ 4" Inch Tubes, Ducts And Pipes. Wall Plate Includes Pre-Drilled Holes For Simplified Mounting. Screws Are Not Included..
Built To Last: Resilient Against Stress, Impact, Heat, And Chemicals. Uv And Weather Resistant, Rust-Resistant, Non-Combustible For Enhanced Fire Safety, Suitable For Corrosive Settings..
Versatile Utility: Perfect For Tumble Dryers, Bathroom/Kitchen Extractor Fans, Hydroponics Setups, In-Line Extract Fans, And Cooker Hoods..
Size: Outer Dimensions - 8.86" X 8.86" Inches, Distance Between Screw Holes - 7.68" Inches, Flange Length - 1.18" Inches, Opening Diameter - 3.94" Inches..
Features
- Crafted from durable galvanized steel and equipped with an EPDM rubber seal for optimal performance - ensures soundproofing, leak prevention, and a secure fit for proper airflow while effectively sealing gaps.
- Size: Outer dimensions - 8.86 x 8.86 Inches, Distance between screw holes - 7.68 Inches, Flange length - 1.18 Inches, Opening diameter - 3.94 Inches.
- Easy Installation: Compatible with round 4 Inch tubes, ducts and pipes. Wall plate includes pre-drilled holes for simplified mounting. Screws are not included.
- Versatile Utility: Perfect for tumble dryers, bathroom/kitchen extractor fans, hydroponics setups, in-line extract fans, and cooker hoods.
- Built to Last: Resilient against stress, impact, heat, and chemicals. UV and weather resistant, rust-resistant, non-combustible for enhanced fire safety, suitable for corrosive settings.
- See more on Amazon...
Brand: Repa Market | Manufacturer: Repa Market
Dimensions: 1.18 x 8.84 x 8.84 Inches | Weight: 10.58 ounces
See On Amazon #16
OZXNO 4.0" Stainless Steel Wall Split Flange 2pcs Split Decorative Escutcheon Self-Adhesive Wall-mounted Water Pipe Cover Accessories
Asin: B0CBYRZCH3 | Model: SSW-SPLIT-FLANGE-101-S2 | PartNumber: SSW-SPLIT-FLANGE-101-S2
Made Of High-Quality Stainless Steel, And Each Decorative Cover Has A Protective Film..
Suitable For Heating Pipes, Water Pipes, Gas Pipes, Angle Valves, Faucets, Radiators, Drain Pipes, Etc..
Split Design, With Card Slot, Easy Installation Without Removing Piping..
Inner Diameter: 101Mm / 4.0", Think: 5Mm/ 0.20"..
Features
- Package included 2pcs Self-Adhesive Split Decorative Cover.
- Inner Diameter: 101mm / 4.0, think: 5mm/ 0.20.
- Made of high-quality stainless steel, and each decorative cover has a protective film.
- Split design, with card slot, easy installation without removing piping.
- Suitable for heating pipes, water pipes, gas pipes, angle valves, faucets, radiators, drain pipes, etc.
- See more on Amazon...
Brand: OZXNO | Manufacturer: OZXNO
See On Amazon #17
3 Pcs Escutcheon Plate Plumbing Cover Plates Wall Split Flange Stainless Steel Round Pipe Flange Faucet Flange Toilet Flange Escutcheon Ring Flange for 1 Inch Diameter Pipe
Asin: B0CZ76LR1V | Model: 573783_1_CepEBkYef | PartNumber: 573783_1_CepEBkYef
Suitable Size: This Escutcheon Plate Pipe Flange Has An Outer Diameter Of 66Mm/2.6Inch And An Inner Diameter Of 24Mm/1Inch, Suitable For Pipes With A Diameter Of 1 Inch..
Widely Used: This Escutcheon Plate Split Flange Can Be Widely Used In Heating Pipes, Water Pipes, Gas Pipes, Faucets, Radiators, Drain Pipes, Bathtub Pipes, Toilet Pipes, Etc..
Self-Adhesive Design: This Metal Escutcheon Ring Has Strong Self-Adhesive Tape On The Back, Which Can Be Directly Attached To The Wall, Easy To Install, Saving Time And Effort..
High Quality Material: These Plumbing Cover Plates Are Made Of High-Quality Stainless Steel Material, Strong And Smooth, Rust-Proof And Corrosion-Proof, Reliable And Durable..
Features
- Great Value Set: You will receive 3 pieces of escutcheon plates. Sufficient quantity to meet the needs of various pipes in your home's kitchen, shower room and other areas.
- High Quality Material: These plumbing cover plates are made of high-quality stainless steel material, strong and smooth, rust-proof and corrosion-proof, reliable and durable.
- Suitable Size: This escutcheon plate pipe flange has an outer diameter of 66mm/2.6inch and an inner diameter of 24mm/1inch, suitable for pipes with a diameter of 1 inch.
- Self-Adhesive Design: This metal escutcheon ring has strong self-adhesive tape on the back, which can be directly attached to the wall, easy to install, saving time and effort.
- Widely Used: This escutcheon plate split flange can be widely used in heating pipes, water pipes, gas pipes, faucets, radiators, drain pipes, bathtub pipes, toilet pipes, etc.
- See more on Amazon...
Brand: Prasacco | Manufacturer: Prasacco
Dimensions: 0.79 x 7.87 x 4.72 Inches
See On Amazon #18
Square Shower Arm Flange Cover Plate Silver 3.5 Large Universal Escutcheon Plate Replacement Shower Arm Flange Plumbing Cover Plates Faucet Cover Plate for Standard 1/2" Pipes
Asin: B0CG9R5T71 | Model: 547734_2_tTTKujL95 | PartNumber: 547734_2_tTTKujL95
Appearance: Elevate The Aesthetics Of Your Bathroom With Our Exquisite Square Shower Flange Cover Plate. Its Sleek Silver Finish Not Only Covers Unsightly Holes But Also Effortlessly Complements Other Bathroom Accessories..
Packaging: Includes 2Pcs Of Extra-Large Silver Tub Spout Cover. These Plumbing Cover Plates Are Designed To Conceal Gaps, Holes, And Damages In Walls, Granting A Seamless And Beautiful Appearance To Your Bathroom..
Installation: Experience Easy Installation With Our Faucet Cover. By Simply Removing The Shower Head, Sliding The Shower Arm Flange Onto The Wall, Attaching The Small Gasket, And Ensuring A Snug Fit Against The Tube, You Can Easily Prevent Any Water Leakage..
Material: Our Shower Arm Flange Is Constructed From Stainless Steel, Guaranteeing Exceptional Durability And Strength. To Further Enhance Its Reliability, We Have Incorporated An O-Shaped Rubber Ring..
Features
- Size: The dimensions of our plumbing cover plates are crafted for convenience and functionality. With an outer diameter of 3.5" (Approx.) and an inner hole diameter of 0.79" (Approx.), along with a height of 0.49" (Approx.), this escutcheon plate is specifically designed to fit standard 1/2" pipes.
- Material: Our shower arm flange is constructed from stainless steel, guaranteeing exceptional durability and strength. To further enhance its reliability, we have incorporated an O-shaped rubber ring.
- Appearance: Elevate the aesthetics of your bathroom with our exquisite square shower flange cover plate. Its sleek silver finish not only covers unsightly holes but also effortlessly complements other bathroom accessories.
- Installation: Experience easy installation with our faucet cover. By simply removing the shower head, sliding the shower arm flange onto the wall, attaching the small gasket, and ensuring a snug fit against the tube, you can easily prevent any water leakage.
- Packaging: Includes 2pcs of extra-large silver tub spout cover. These plumbing cover plates are designed to conceal gaps, holes, and damages in walls, granting a seamless and beautiful appearance to your bathroom.
- See more on Amazon...
Brand: Sliverdew | Manufacturer: Sliverdew
Dimensions: 0.39 x 3.54 x 3.54 Inches
See On Amazon #19
PZRT 2pcs Wall Split Flange, Stainless Steel Round Escutcheon Plate Wall-mounted Water Pipe Cover Accessories for 24mm Diameter Pipe
Asin: B098DMVL1K | Model: REPWMEPC-24-2 | PartNumber: REPWMEPC-24-2 | Ean: 0729388440757 | UPC: 729388440757
There Is A Protective Film On The Front Of The Decorative Cover, Which Is Not Afraid Of Scratches During Transportation, And There Is Adhesive On The Back, Which Can Be Peeled And Glued When Using..
Inner Diameter: 24Mm.
It Is Widely Used In Heating Pipes, Water Pipes, Gas Pipes, Angle Valves, Faucets, Radiators, Drain Pipes, Etc..
Split Design, With Card Slot, Tight Connection, Easy Installation..
Features
- Stainless steel material, rust-proof and corrosion-resistant.
- Split design, with card slot, tight connection, easy installation.
- There is a protective film on the front of the decorative cover, which is not afraid of scratches during transportation, and there is adhesive on the back, which can be peeled and glued when using.
- It is widely used in heating pipes, water pipes, gas pipes, angle valves, faucets, radiators, drain pipes, etc.
- Inner Diameter: 24mm
- See more on Amazon...
Brand: PZRT | Manufacturer: PZRT
Weight: 0.02 pounds
See On Amazon #20
Vent Systems 4" inch Air Vent Duct Connector Flange Straight Ventilation Pipe Plastic Ducting Connector Plate For Cooling Heating Ventilation System HVAC With Valve
Asin: B08GY38QP5 | Ean: 4751037230033
Easy To Install - Pre-Bored Holes To Ensure Easy And Secure Mounting To Wall, Ceiling Or Any Other Surface.
Vent Systems Products Are Made To Be Used For Home Improvement, Office Improvement. They Are Portable, High Quality And Long Durability..
Perfectly Suited Duct Flange To Connect Your Extractor Fan, Bathroom Fan, Kitchen Exhaust Fan, In-Line Extract Fan And Cooker Hood Or Any Other Indoor Outdoor Heating Cooling Pipe.
Duct Connector Flange - Easily Fit With Different 4" Inch Plastic Pipes For Hvac And Home Improvement.
Features
- Made of High Quality ABS Plastic and perfectly designed for DIY and Trade
- Duct Connector Flange - Easily fit with different 4 inch plastic pipes for HVAC and Home Improvement
- Easy to install - pre-bored holes to ensure easy and secure mounting to wall, ceiling or any other surface
- Perfectly suited Duct Flange to Connect your Extractor Fan, Bathroom fan, Kitchen exhaust Fan, In-line Extract fan and Cooker hood or any other indoor outdoor heating cooling pipe
- Vent Systems products are made to be used for home improvement, office improvement. They are portable, high quality and long durability.
- See more on Amazon...
Brand: Vent Systems | Manufacturer: Vent Systems
Dimensions: 2.44 x 5.91 x 5.91 inches | Weight: 80.00 Grams
See On Amazon
Looking For Something Else?
Search