uxcell Refrigerant Charging Hose, 1/4 SAE Thread 4.92Ft Length 800PSI Tube HVAC Hoses, for Home Air Conditioner Refrigeration Maintenance, Red
Asin: B08ZMNW4Q9
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.[Reliable Connection] - Strong Six-Sided Crimp Provides A Secure, Reliable Connection Between The Hose And Barb - Even At Maximum Pressure(Notice:Please Also Note That Our 1/4Sae Thread Only Fits For The 7/16-20Unf Thread.).
[Application] - This Hvac Hose Is Good For Testing Or Repairing, Such As Home Or Hvac Air Conditioner, Ductless Mini-Split Ac Systems, Refrigerator, Refrigeration Charging, Vacuum Pump, Pressure Gauge And So On..
[Easy To Install] - 45 Degrees Bend On The End For Convenient Access To The Adapter On The System. Deep Knurling On The Coupler Nuts Provides A Positive Grip And Enables Quick Finger-Tightening.
[Refrigerant Hose Material] - Rubber Hose And Brass Connector Offer Flexibility And Abrasion Resistance Ensuring Long Life And Dependability.
Features
- [Size] - Total Length: 1.5M / 4.92Ft; Thread Size: 1/4 SAE; Working Pressure: 800PSI; Burst Pressure: 4000PSI
- [Refrigerant Hose Material] - Rubber hose and brass connector offer flexibility and abrasion resistance ensuring long life and dependability
- [Reliable Connection] - Strong six-sided crimp provides a secure, reliable connection between the hose and barb - even at maximum pressure(Notice:Please also note that our 1/4SAE Thread only fits for the 7/16-20UNF thread.)
- [Easy to Install] - 45 degrees bend on the end for convenient access to the adapter on the system. Deep knurling on the Coupler nuts provides a positive grip and enables quick finger-tightening
- [Application] - This HVAC hose is good for testing or repairing, such as home or HVAC air conditioner, ductless mini-split AC systems, refrigerator, refrigeration charging, vacuum pump, Pressure gauge and so on.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon Similar To uxcell Refrigerant Charging Hose 1
#1
Aupoko R134A AC Refrigerant Charge Hose, 1/2 Acme Can Opener Tap Dispensing Valve, and Recharge Hose with Pressure Gauge, Fits for Car AC Air Conditioning Refrigerant
Asin: B07F9YKX9S | Model: R134A Recharge Hose /w Gauge | PartNumber: R134A Recharge Hose /w Gauge | Ean: 0606034659858 | UPC: 606034659858
❄ Easy Installation ---- R134a Gauge Recharge Hose Has 90 Degree Push & Lock Coupler With Auto Shut Off. Easy And Convenient To Use. Come With Gauge For Easily Viewing During Use And Getting A Correct Charge..
❄ Package Includes ---- With 1/2’’ Acme Frezon Can Tap, Recharge Hose With Gauge And R134a Low Side Quick Coupler,We Can Provide 12 Months Free-Worry Warranty, Should Be There Any Question, Please Feel Free To Contact Us..
❄ Dimension ---- 1/2’’ Acme Female X 1/4’’ Sae Male Can Tap Opener, 13Mm R134a Low Pressure Quick Coupler, Thread: Female Low Side R134a 13 Mm Quick Coupler X Male 1/4’’ Sae Fl..
❄ Premium Quality ---- R134a Can Tap, R134a Low Side Quick Are Made Of Aluminium Alloy, For High Heat Resistance Durability And Safety..
Features
- WIDE COMPATIBILITY ---- A/C can tap guage hose recharge for R134A R12 or R22 refrigerant refrigerant to vehicle or home air-conditioning, with highly working performance.
- PREMIUM QUALITY ---- R134A can tap, R134A low side quick are made of aluminium alloy, for high heat resistance durability and safety.
- EASY INSTALLATION ---- R134A gauge recharge hose has 90 degree Push & Lock coupler with auto shut off. Easy and convenient to use. Come with gauge for easily viewing during use and getting a correct charge.
- DIMENSION ---- 1/2 ACME female x 1/4 SAE male can tap opener, 13mm R134A low pressure quick coupler, thread: female low side R134a 13 mm quick coupler x male 1/4 SAE FL.
- PACKAGE INCLUDES ---- With 1/2 ACME frezon can tap, recharge Hose with gauge and R134A low side quick coupler,we can provide 12 months free-worry warranty, should be there any question, please feel free to contact us.
- See more on Amazon...
Brand: Aupoko | Manufacturer: Aupoko
Weight: 0.02 pounds
Warranty: 1-Year warranty
See On Amazon #2
Aupoko R134A Car AC Refrigerant Charge Hose, AC Charge Hose with Gauge, R134A Can Tap Valve, R134A Quick Couple, Low Pressure Gauge and 59'' Recharge Hose
Asin: B07QMLQ2D5 | Model: R134A Refrigerant Recharger Hose | PartNumber: R134A Refrigerant Recharger Hose | Ean: 0606034661066 | UPC: 606034661066
※ Easy Installation ----- Push & Lock Coupler With Auto Shut Off, Easy And Convenient To Use..
※ 1 Year Warranty ---- The R134a Charging Hose To Refrigerator Has 12 Months Warranty, True Worry-Free Shopping Experience. If This Part Ever Fails Please Contact Us For A Replacement Or Refund In The Limited Time..
※ Dimension ---- Auto 1/2 Lh Ac Refrigerant Can Opener Tap Dispensing Valve, Please Note This Is A Puncture Type Can Opener, Not Self-Sealing Can Tap, 59’’ Charging Hose, 200 Psi Pressure Gauge, And R134a Low Side Adapter..
※ Premium Quality ---- The R134a A/C Service Hose Kit Is Made Of Metal And High Quality Rubber Material, With Solid Construction And Stable Performance..
Features
- WIDE COMPATIBILITY ---- The Car HVAC refrigerant recharge kit fits for R134A R12 or R22 refrigerant refrigerant to vehicle or home air-conditioning.
- PREMIUM QUALITY ---- The R134A A/C service hose kit is made of metal and high quality rubber material, with solid construction and stable performance.
- EASY INSTALLATION ----- Push & Lock coupler with auto shut off, easy and convenient to use.
- DIMENSION ---- Auto 1/2 LH AC refrigerant can opener tap dispensing valve, please note this is a puncture type can opener, not self-sealing can tap, 59 charging hose, 200 PSI pressure gauge, and R134A Low side adapter.
- 1 YEAR WARRANTY ---- The R134A charging hose to refrigerator has 12 months warranty, true worry-free shopping experience. If this part ever fails please contact us for a replacement or refund in the limited time.
- See more on Amazon...
Brand: Aupoko | Manufacturer: Aupoko
Weight: 0.02 Pounds
See On Amazon #3
Aupoko R134A AC Refrigerant Charge Hose Kit, 1/2 Self-Sealing Valve Can, and Recharge Hose with Pressure Gauge, Fits for Car AC Air Conditioning Refrigerant
Asin: B07SZM1RC9 | Model: R-1234yf Can Tap | PartNumber: R-1234yf Can Tap | Ean: 0606034661349 | UPC: 606034661349
R134a Self Sealing Can Tap --- This Can Tap Can Only Be Use On Self-Sealing Cans With 1/2’’ Thread (Can Capacity Usual Greater Than 6Oz Or So-Called Big Cans), Either Cannot Be Used On Puncture Style Cans..
1 Year Warranty --- Order R134a U-Charge Hose With Gauge From Aupoko, We Can Provide 12 Months Warranty, Should Be There Any Question, Please Feel Free To Cnotact Us..
Premium Quality --- High Quality R134a Refrigerant Freon Charge Hose With Gauge With Strong Construction.Built-In Safety Valve To Prevent Accidental Venting Of Refrigerant..
Easy To Use --- The Car Ac Recharge Kit Are Designed With 90-Degree Push & Lock Coupler With Auto Shut Off. Easy And Convenient To Use. Come With Gauge For Easily Viewing During Use And Getting A Correct Charge..
Features
- WIDE COMPATIBLITY --- The AC recharge hose with gauge completed with R134A self-sealing refrigerant can opener tap dispensing valve with 1/2 thread, for use in adding R134A refrigerant to vehicle or home air-conditioning with highly working performance.
- EASY TO USE --- The car ac recharge kit are designed with 90-degree push & lock coupler with auto shut off. Easy and convenient to use. Come with gauge for easily viewing during use and getting a correct charge.
- R134A SELF SEALING CAN TAP --- This can tap can only be use on self-sealing cans with 1/2 thread (Can capacity usual greater than 6OZ or so-called big cans), either cannot be used on puncture style cans.
- PREMIUM QUALITY --- High quality R134A refrigerant freon charge hose with gauge with strong construction.Built-in safety valve to prevent accidental venting of refrigerant.
- 1 YEAR WARRANTY --- Order R134A u-charge hose with gauge from Aupoko, we can provide 12 months warranty, should be there any question, please feel free to cnotact us.
- See more on Amazon...
Brand: Aupoko | Manufacturer: Aupoko
Weight: 0.22 pounds
See On Amazon #4
LIYYOO R134a AC Refrigerant Recharge Hose Kit, with Measuring Pressure Gauge and 1/2 Acme Can Opener Tap Dispensing Valve Fit for Car AC Air Conditioning Refrigerant Charging
Asin: B07TBHQX1R | Model: 2066 | PartNumber: 2066 | Ean: 8414740461595
▶ The R134a Charging Hose Kit Is Made Of Aluminium Alloy And High Quality Rubber Material, With Solid Construction And Stable Performance..
▶ Provide High Quality And Professional Parts And First Class Service, Please Check The Parts And Parts Number Before Ordering! If You Have Any Questions, Please Feel Free To Contact Us Via Email! We Will Solve It For You In The First Time!.
▶ The R134a Ac Charging Hose Come With Gauge For Easily Viewing During Use,Low Side Gauge Monitors Pressure To Aid In Getting A Correct Charge..
▶ Tech Specs:Bottle Opener Thread: 1/2”Acme.Recharge Hose Pressure: 600~3000Psi. Hose Length: 48Cm/18.9 Inches.Gauge Scale Range: 0-350Psi..
Features
- The R134a refrigerant recharge hose with gauge and 1/2 Acme Can Opener Tap Dispensing Valve, with strong construction.Using for home air-conditioning and car air-conditioning add R134A refrigerant,with highly working performance.
- Tech Specs:Bottle Opener Thread: 1/2 ACME.Recharge Hose Pressure: 600~3000PSI. Hose Length: 48cm/18.9 inches.Gauge scale range: 0-350PSI.
- The R134a charging hose kit is made of aluminium alloy and high quality rubber material, with solid construction and stable performance.
- The R134a ac charging hose come with gauge for easily viewing during use,Low side gauge monitors pressure to aid in getting a correct charge.
- Provide high quality and professional parts and first class service, please check the parts and parts number before ordering! If you have any questions, please feel free to contact us via email! We will solve it for you in the first time!
- See more on Amazon...
Brand: LIYYOO | Manufacturer: LIYYOO
Dimensions: 0.99 x 7.00 x 6.00 inches | Weight: 0.44 pounds
See On Amazon #5
Aupoko R134A Recharge Hose Kit with Gauge, 59'' AC Refrigerant Recharging Hose with 1/2" Female R134A Can Tap Refrigerant Dispenser, R134A Quick Couple, and R410A Straight Swivel Adapter
Asin: B085VPRZ2P | Model: R134A Refrigerant Recharging Hose Kit | PartNumber: R134A Refrigerant Recharging Hose Kit
❄ Easy Installation ---- Push & Lock Coupler With Auto Shut Off, Easy And Convenient To Use. Come With Gauge For Easily Viewing During Use And Getting A Correct Charge..
❄ Package Includes ---- R134a Air Conditioning Refrigerant Charging Hose With Gauge, 1Pc R134a Can Opener, And R134a Quick Coupler, 1/4" Sae M To 5/16"F R410a Straight Adapter..
❄ Dimension ---- 1/2’’ Female X 1/4’’ Sae Male Can Tap Opener, 59’’Length Recharge Hose, 13Mm R134a Low Pressure Quick Couple, 2.7’’ Length Gauge, R410a Mini Split Adapter With 5/16’’ Sae Female X 1/4’’ Sae Male Thread..
❄ Premium Quality ---- R134a Can Tap, R134a Low Side Quick Coupler Are Made Of Aluminium Alloy, Mini Split Adapter Fitting Is Made Of Brass Alloy For High Heat Resistance Durability And Safety..
Features
- WIDE COMPATIBILITY ---- R134A refrigerant recharging hose kit fits for R134A R12 or R22 refrigerant refrigerant to vehicle or home air-conditioning, with highly working performance.
- PREMIUM QUALITY ---- R134A can tap, R134A low side quick coupler are made of aluminium alloy, mini split adapter fitting is made of brass alloy for high heat resistance durability and safety.
- EASY INSTALLATION ---- Push & lock coupler with auto shut off, easy and convenient to use. Come with gauge for easily viewing during use and getting a correct charge.
- DIMENSION ---- 1/2 female x 1/4 SAE male can tap opener, 59 length recharge hose, 13mm R134A Low Pressure quick couple, 2.7 length gauge, R410A mini split adapter with 5/16 SAE female x 1/4 SAE male thread.
- PACKAGE INCLUDES ---- R134A air conditioning refrigerant charging hose with gauge, 1Pc R134A can opener, and R134A quick coupler, 1/4 SAE M to 5/16F R410A Straight Adapter.
- See more on Amazon...
Brand: Aupoko | Manufacturer: Aupoko
Weight: 0.00 pounds
See On Amazon #6
uxcell Refrigerant Charging Hose, 1/4 SAE Thread 2.95Ft Length 500PSI Tube HVAC Hoses, for Home Air Conditioner Refrigeration Maintenance, Yellow
Asin: B08ZM3D9DS
[Reliable Connection] - Strong Six-Sided Crimp Provides A Secure, Reliable Connection Between The Hose And Barb - Even At Maximum Pressure(Notice:Please Also Note That Our 1/4Sae Thread Only Fits For The 7/16-20Unf Thread.).
[Application] - This Hvac Hose Is Good For Testing Or Repairing, Such As Home Or Hvac Air Conditioner, Ductless Mini-Split Ac Systems, Refrigerator, Refrigeration Charging, Vacuum Pump, Pressure Gauge, And So On..
[Easy To Install] - 45 Degrees Bend On The End For Convenient Access To The Adapter On The System. Deep Knurling On The Coupler Nuts Provides A Positive Grip And Enables Quick Finger-Tightening.
[Refrigerant Hose Material] - Rubber Hose And Iron Connector With Copper Plating Offer Flexibility And Abrasion Resistance Ensuring Long Life And Dependability..
Features
- [Size] - Total Length: 0.9M / 2.95Ft; Thread Size: 1/4 SAE; Working Pressure: 500PSI; Burst Pressure: 2500PSI; Fit for Refrigerant: 22, 12, 134a
- [Refrigerant Hose Material] - Rubber hose and iron connector with copper plating offer flexibility and abrasion resistance ensuring long life and dependability.
- [Reliable Connection] - Strong six-sided crimp provides a secure, reliable connection between the hose and barb - even at maximum pressure(Notice:Please also note that our 1/4SAE Thread only fits for the 7/16-20UNF thread.)
- [Easy to Install] - 45 degrees bend on the end for convenient access to the adapter on the system. Deep knurling on the Coupler nuts provides a positive grip and enables quick finger-tightening
- [Application] - This HVAC hose is good for testing or repairing, such as home or HVAC air conditioner, ductless mini-split AC systems, refrigerator, refrigeration charging, vacuum pump, Pressure gauge, and so on.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #7
R134a Recharge Hose Kit with Gauge, 51'' AC Refrigerant Recharging Hose Measuring Kit, Self-sealing R-134a Can Tap Refrigerant Dispenser to R-12/R-22 port, Include R134a Low Side Quick Couple
Asin: B085VY3RHD | Model: R134A Refrigerant Charging Hose | PartNumber: R134A Refrigerant Charging Hose
[Advantage] -Come With Gauge For Easily Viewing During Use,Low Side Gauge Monitors Pressure To Aid In Getting A Correct Charge..
[Service Gurantee] -Package Include: 1Pc X R134a Charging Hose With Gauge Removable R134a Can Tap, 1Pc X R134a Low Side Quick Couple. If It Fails, Feel Free To Contact Us Any Time..
[Premium Quality] -The R134a Ac Service Hose Kit Is Made Of Metal And High Quality Rubber Material, With Solid Construction And Stable Performance..
[R134a Can Tap] -Auto Ac Refrigerant Can Opener Tap Dispensing Valve, 1/2" Acme Female R-H Thread And 1/4’’ Sae Male. Please Note This Is A Puncture Type Can Opener, Self-Sealing Can Tap, 51’’ Charging Hose, 200 Psi Pressure Gauge, And R134a Low Side Adapter..
Features
- [WIDE APPLICATION] -The air conditioning refrigerant auto ac recharge kit with gauge fits for R134A R12 or R22 refrigerant refrigerant to vehicle or home air-conditioning.
- [R134A CAN TAP] -Auto AC refrigerant can opener tap dispensing valve, 1/2 Acme Female R-H Thread and 1/4 SAE Male. Please note this is a puncture type can opener, self-sealing can tap, 51 charging hose, 200 PSI pressure gauge, and R134A Low side adapter.
- [ADVANTAGE] -Come with gauge for easily viewing during use,Low side gauge monitors pressure to aid in getting a correct charge.
- [PREMIUM QUALITY] -The R134A AC service hose kit is made of metal and high quality rubber material, with solid construction and stable performance.
- [SERVICE GURANTEE] -Package include: 1Pc x R134a Charging Hose with Gauge Removable R134a Can Tap, 1Pc x R134a Low Side Quick Couple. If it fails, feel free to contact us any time.
- See more on Amazon...
Brand: gohantee | Manufacturer: gohantee
Dimensions: 0.04 x 7.09 x 5.91 inches
See On Amazon #8
R134A Car AC Refrigerant Charge Hose Kit Recharge Hose with Gauge,A/C 1/2 Recharge Measuring Kit Can Tap Air Conditioning Pressure Gauge R134A by Ketofa
Asin: B07FCFWXNQ | Model: R134A | PartNumber: R134A | Ean: 0673257133458 | UPC: 673257133458
The Hose Adopted High Quality Rubber Material, High Pressure Resistance And Reliable..
Used To Check Low Side Pressure For Accurate Fill Of Your Air Conditioner.
For Use In Adding R134a Refrigerant To Vehicle Or Home Air-Conditioning With Highly Working Performance..
This System Refrigerant Charging Pipe With Built-In Safety Valve To Prevent Accidental Venting Of Refrigerant..
Features
- 1/2 Thread for American and Europe.Metal valve with 1/2" fitting. The connector to the Freon gas tank is adjustable.
- This System Refrigerant Charging Pipe with built-in safety valve to prevent accidental venting of refrigerant.
- The hose adopted high quality rubber material, high pressure resistance and reliable.
- For use in adding R134A refrigerant to vehicle or home air-conditioning with highly working performance.
- Used to check low side pressure for accurate fill of your air conditioner
- See more on Amazon...
Brand: Ketofa | Manufacturer: R134A-7U
See On Amazon #9
Belleone R134a Refrigerant Recharge Kit, AC Recharge Hose Kit with Gauge, R134a Freon Can Tap Recharging Hose with Detachable R134a Quick Coupler, R134a Self-Sealing Adapter for AC Refrigerant System
Asin: B07WK5Y31F | Ean: 0758277586771 | UPC: 758277586771
【High Quality】Made Of Corrosion-Resistant Metal And The Hose Adopted Quality Rubber Material, High Pressure Resistance And Sturdy..
【Thoughtful Design】The Ports Have Inside Gasket To Prevent Leak. Economical Way To Bring Your Fridge Back..
【Easy To Read】The Gauge With 3 Different Type Scale Readings For R134, R12 And R22 Freon..
【Wide Compatiblity】Connect Can Of R134a, R-12, R-22 Refrigerant Port. With The R134a Self-Sealing Adapter, The R134a Can Compitable With Not Only Piercing R134a Cans But Also Self Sealing Cans. For Car System, Extra Bpv31 Piercing Tap Valve Are Needed. If You Have Any Questions, Please Ask Us For Help..
Features
- Applicability The length of hose is 19", come with clear gauge for viewing. R-134a quick coupler can be easily connected to the R-12 / R-22 1/4" SAE port side. Perfectly fit for r134a, r12, and r22 refrigerant, piercing r134a cans and r134a self sealing cans.
- Wide Compatiblity Connect can of R134a, R-12, R-22 refrigerant port. With the r134a self-sealing adapter, the r134a can compitable with not only piercing r134a cans but also self sealing cans. For car system, extra BPV31 piercing tap valve are needed. If you have any questions, please ask us for help.
- High Quality Made of corrosion-resistant metal and the hose adopted quality rubber material, high pressure resistance and sturdy.
- Easy to Read The gauge with 3 different type scale readings for R134, R12 and R22 Freon.
- Thoughtful Design The ports have inside gasket to prevent leak. Economical way to bring your fridge back.
- See more on Amazon...
Brand: Belleone | Manufacturer: Belleone
Dimensions: 1.65 x 8.10 x 6.20 inches | Weight: 0.68 pounds
See On Amazon #10
R134A R410A R22 R12 Charging Hoses and Ball Valve Set, 3 Pcs Color Coded Hoses/w Ball Valve 1/4" SAE Thread (7" Long) for AC HVAC Maintenance Kit and Air Condition Refrigeration Charging Tools
Asin: B07FB1JS19 | Model: 7" 1/4" SAE R134A Hoses /w Ball Valve | PartNumber: 7" 1/4" SAE R134A Hoses /w Ball Valve | Ean: 0606034659872 | UPC: 606034659872
Well Design --- Designed To Meet Standard 1/4" Sae Female Refrigerant Charging Hoses Set With Shut Off Of Red, Blue And Yellow. Ball Valve Design With A Quarter Turn Of The Valve Handle Switch For Controls Refrigerant. Can Be Operated With One Hand - Screws Onto Charging Hose End..
One Year Warranty --- The Hvac, Hvac/R, A/C Maintenance Tools Comply With One Year Warranty, Should Be There Any Question, Please Feel Free To Contact Us..
Premium Quality --- Made Of Heavy-Duty Solid Metal For Durable Use. Valves Are Color Coded On Knobs 1-Red, 1-Blue & 1-Yellow..
High Wroking Pressure --- 7" Long Charging Hose Completed With Solid Brass Manual Shut-Off Ball Valve. Rated Working Pressure: 3000 Psi Burst / 600 Psi Max. Working Pressure..
Features
- WIDE APPLICATION --- Standard refrigeration charging hoses with 1/4" SAE male and female thread for refrigerants R410A,R22,R134a,R12.
- HIGH WROKING PRESSURE --- 7 Long Charging Hose Completed with Solid Brass Manual Shut-off Ball Valve. Rated working pressure: 3000 psi burst / 600 psi Max. working pressure.
- WELL DESIGN --- Designed to meet standard 1/4 SAE female refrigerant charging hoses set with shut off of red, blue and yellow. Ball valve design with a quarter turn of the valve handle switch for controls refrigerant. Can be operated with one hand - Screws onto charging hose end.
- PREMIUM QUALITY --- Made of heavy-duty solid metal for durable use. Valves are color coded on knobs 1-Red, 1-Blue & 1-Yellow.
- ONE YEAR WARRANTY --- The HVAC, HVAC/r, A/C maintenance tools comply with one year warranty, should be there any question, please feel free to contact us.
- See more on Amazon...
Brand: Aupoko | Manufacturer: Aupoko
Dimensions: 0.04 x 7.00 x 0.40 inches
Warranty: 1-Year warranty
See On Amazon #11
JIFETOR AC Charge Hose with Gauge, Car R134A Refrigerant Recharge Kit, Auto Air Conditioning U Charging Hose Low Pressure Measuring Meter with 1/2 inch Can Tap and R134A Quick Coupler, 100PSI
Asin: B085T4CXC2 | Model: JT014S1 | PartNumber: JT014S1 | Ean: 0690770903917 | UPC: 690770903917
Metal Quick Coupler: One Side Of The Ac Charging Hose Is Metal Quick Interface Coupler With Accurate Snap Lock And Anti-Slip Grip Ring, Easy To Connect And Disconnect, Compatible With All Models With Standard R134a Low Pressure Side Suction Service Port. Aim At Service Port, Pull Up The Knurled Grip Ring, Push The Quick Coupler To Connect And Lock, And Lift To Disconnect..
Measure Pressure And Recharge R134a: Start The Car, Open Ac To Max. Clockwise Twist T Handle To Close Can Tap, Connect The Quick Coupler And Car Ac Suction Service Port To Measure The Pressure. The Reading Is Right Only When Ac Compressor Is Working. If Need To Charge The Refrigerant, Please Compare To The Manufacturer's Recommended Readings, Choose The Appropriate Amount Refrigerant Can, To Ensure There Is No Leftover In The Can..
Simple R134a Charging Tool: This Air Conditioning U Hose Gauge Is Very Simple, Only 19 Inch Long And Equipped With A Non-Detachable Gauge Can Tap Quick Coupler. Also It Is Very Easy To Operate Dynamic Pressure Measurement And Refrigerant Charging From Auto Low Pressure Suction Service Port..
Can Tap: The Other Side Of The Refrigerant Recharge Hose Is Metal Can Tap With 1/2 Inch Female Thread Interface, Can Screw To Fix On 1/2 Inch Male Thread Of Refrigerant Bottle Opening. T Type Knob, Easy To Operate By Fingertips. Internal Pin With Sharp Tip Help To Pierce Refrigerant Bottle Easily And Quickly. Do Not Use The Can Tap As R134a Cap, Refrigerant Is Corrosive, If Use This Can Tap As R134a Cap For A Long Time, The Inner Rubber Sealing Ring Will Be Corroded, Then You Will Find It Leaks.
Refrigerant Charging Gauge: Right In The Middle Of The Refrigerant Recharge Hose, There Is A Ac Low Pressure Gauge With Scale Range 0-100 Pounds Per Square Inch / 0-7 Kilogram Per Square Centimeter. Equipped With Metal Scale Plate, Color Coded Scale Range To Mark Pressure State With Low Full Alert Danger. Easy To Monitor The Automotive Air Conditioning Low Pressure Side Pressure, To Insure A Accurate R134a Recharge..
Features
- AC U Charge Hose: R134A charging hose uses rubber nylon resin material hoses, featured with anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing. Max working pressure is 500PSI and burst pressure is upto 2500PSI. Total length is 19 inch, ideal for easy to reach AC suction service port, for example the AC connector is right on top of your engine compartment.
- Refrigerant Charging Gauge: Right in the middle of the refrigerant recharge hose, there is a AC low pressure gauge with scale range 0-100 pounds per square inch / 0-7 kilogram per square centimeter. Equipped with metal scale plate, color coded scale range to mark pressure state with LOW FULL ALERT DANGER. Easy to monitor the automotive air conditioning low pressure side pressure, to insure a accurate R134A recharge.
- Metal Quick Coupler: One side of the AC charging hose is metal quick interface coupler with accurate snap lock and anti-slip grip ring, easy to connect and disconnect, compatible with all models with standard R134A low pressure side suction service port. Aim at service port, pull up the knurled grip ring, push the quick coupler to connect and lock, and lift to disconnect.
- Can Tap: The other side of the refrigerant recharge hose is metal can tap with 1/2 inch female thread interface, can screw to fix on 1/2 inch male thread of refrigerant bottle opening. T type knob, easy to operate by fingertips. Internal pin with sharp tip help to pierce refrigerant bottle easily and quickly. Do not use the can tap as R134A cap, refrigerant is corrosive, if use this can tap as R134A cap for a long time, the inner rubber sealing ring will be corroded, then you will find it leaks
- Measure Pressure and Recharge R134A: Start the car, open AC to MAX. Clockwise twist T handle to close can tap, connect the quick coupler and car AC suction service port to measure the pressure. The reading is right only when AC compressor is working. If need to charge the refrigerant, please compare to the manufacturer's recommended readings, choose the appropriate amount refrigerant can, to ensure there is no leftover in the can.
- Simple R134A Charging Tool: This air conditioning U hose gauge is very simple, only 19 inch long and equipped with a non-detachable gauge can tap quick coupler. Also it is very easy to operate dynamic pressure measurement and refrigerant charging from auto low pressure suction service port.
- See more on Amazon...
Brand: JIFETOR | Manufacturer: JIFETOR
Weight: 0.33 pounds
Warranty: 30 days full refund with returned undamaged JIFETOR product. Any quality related problem in 1 year, we will replace the fittings for free or refund. Any question, please feel free to contact us by amazon message system.
See On Amazon #12
Lichamp 3 Pieces 5FT AC HVAC Manifold Gauge Hose Kit with Ball Valve Tension Hose and 4 Pieces Hose Adapters Fits R134A R410A R404A R12 R22 R502 R1234YF Refrigerants
Asin: B08B43R4LV | Model: AGH-350200 | PartNumber: AGH-350200 | Ean: 0791533865388 | UPC: 791533865388
Standard 1/4 Inch Female Flare Fittings With A Valve Core Depressor And 45° Bend On One End Ball Valve For Convenient And Safe Access To The System, Extra 4 Pieces Adapters Ensure That Most Interfaces Can Be Connected..
Coupler Nuts Feature Deep Knurling For A Positive Grip That Enables Quick Finger-Tightening, Hose Ends Feature A Strong Six-Sided Crimp That Provides A Secure, Reliable Connection Between The Hose And Barb - Even At Maximum Pressure..
Long Lasting And Rugged Neoprene Coating Offers Flexibility And Wear Resistance Ensuring Long Life And Dependability..
5Ft Long Hose Kit With Ball Valve End Tension Hose Feature A 4000 Psi Burst Pressure And 800 Psi Max Working Pressure, Suit For Most Of Ac Hvac Check And Charge Project..
Features
- Professional ac hose kit for working with ac hvac air conditioner manifold gauge, fits R134A R410A R404A R12 R22 R502 R1234YF type refrigerants.
- 5FT long hose kit with ball valve end tension hose feature a 4000 psi burst pressure and 800 psi max working pressure, Suit for most of ac hvac check and charge project.
- Standard 1/4 inch female flare fittings with a valve core depressor and 45 bend on one end ball valve for convenient and safe access to the system, extra 4 pieces adapters ensure that most interfaces can be connected.
- Long lasting and rugged neoprene coating offers flexibility and wear resistance ensuring long life and dependability.
- Coupler nuts feature deep knurling for a positive grip that enables quick finger-tightening, hose ends feature a strong six-sided crimp that provides a secure, reliable connection between the hose and barb - even at maximum pressure.
- See more on Amazon...
Brand: Lichamp | Manufacturer: Lichamp
Dimensions: 1.65 x 10.63 x 11.22 inches | Weight: 2.20 Pounds
See On Amazon #13
SURIEEN AC Charge Hose with Gauge, R134A AC Refrigerant Recharge Hose Kit, 1/2 Can Tap Dispensing Valve and R134A Quick Coupler Fits for Car AC Air Conditioning Refrigerant 250 PSI
Asin: B085VH4D2Q | Model: R134A Recharge Hose /w Gauge | PartNumber: R134A Recharge Hose /w Gauge
★【Easy To Use】The Car Ac Recharge Kit Are Designed With 90-Degree Push & Lock Coupler With Auto Shut Off. Come With Gauge For Easily Viewing During Use And Getting A Correct Charge. If The Needle Not On 0Psi, Please Open The Lid On The Gauge, Then Adjust The Knob In The Gauge Before Using. The Side You Attach To The Cans Just Need To Turn Right Amount, Then The Refrigerant Will Flow More Fluently..
★【What You Get】The R134a Refrigerant Recharge Hose With Gauge Has 12 Months Warranty, True Worry-Free Shopping Experience. If This Part Ever Fails, Simply Contact Us For A Replacement Or Refund. We Provide Friendly 24/7 Customer Service..
★【Dimension】R134a Ac Refrigerant Charge Hose Kit Comes With 1/2’’ Female X 1/4’’ Sae Male Can Tap Opener, 15’’ Recharge Hose, 13Mm R134a Low Pressure Quick Coupler, 2.76’’ Length Gauge. T Type Knobs Have Internal Pin With Sharp Tip Help To Pierce Refrigerant Bottle Easily And Quickly..
★【Wide Compatibility】 Car Ac Recharge Kit Fits For R134a R12 Or R22 Refrigerant To Vehicle Or Home Air-Conditioning, With Highly Working Performance. Built-In Safety Valve To Prevent Accidental Venting Of Refrigerant. This Ac Hose Is Designed To Only Work With Piercing Type R-134A Bottles. 1/2 Thread For American And Europe..
Features
- PREMIUM QUALITY The AC recharge hose with gauge comes with R134A can tap with 1/2 thread, R134A low side quick coupler and adapter switch, made of high quality aluminium alloy, for high heat resistance durability and safety. Easy and convenient to use. Gauge rated 250psi max pressure, hose rated 3000 psi burst pressure, and 600 psi max working pressure.
- WIDE COMPATIBILITY Car AC recharge kit fits for R134A R12 or R22 refrigerant to vehicle or home air-conditioning, with highly working performance. Built-in safety valve to prevent accidental venting of refrigerant. This ac hose is designed to ONLY work with piercing type R-134a bottles. 1/2 Thread for American and Europe.
- EASY TO USE The car ac recharge kit are designed with 90-degree push & lock coupler with auto shut off. Come with gauge for easily viewing during use and getting a correct charge. If the needle not on 0psi, please open the lid on the gauge, then adjust the knob in the gauge before using. The side you attach to the cans just need to turn right amount, then the refrigerant will flow more fluently.
- DIMENSION R134A AC Refrigerant Charge Hose Kit comes with 1/2 female x 1/4 SAE male can tap opener, 15 recharge hose, 13mm R134A low pressure quick coupler, 2.76 length gauge. T type knobs have internal pin with sharp tip help to pierce refrigerant bottle easily and quickly.
- WHAT YOU GET The R134A Refrigerant Recharge Hose with Gauge has 12 months warranty, true worry-free shopping experience. If this part ever fails, simply contact us for a replacement or refund. We provide friendly 24/7 customer service.
- See more on Amazon...
Brand: SURIEEN | Manufacturer: SURIEEN
Weight: 0.22 Pounds
See On Amazon #14
Aupoko AC Refrigerant Charging Hose with Ball Valve, 3-Color 60" R410A HVAC Hoses Kit with 1/4 SAE Thread, with Valve Core Remover Kit for R410A R134A R12 R22 R502 R404 Air Condition Maintenance
Asin: B085VQ1W1R | Model: AC Charging Hoses with Ball Valve | PartNumber: AC Charging Hoses with Ball Valve
✈ Premium Quality Refrigerant Charging Hose Set With Shut-Off Ball Valve Is Made Of High Quality Brass Alloy And Rubber, Last Long; Easy To Operate And Install, Strong Sealing For Durability And Safety..
✈ Package Included This Hose Kit For Hvac 410A Come With Red, Blue And Yellow 60’’ Hose With Ball Valve, 1 Pc Valve Core Remover, 2Pcs Thimbles And 6Pcs Rubber Gaskets..
✈ Set Of Three House 3 Pieces 60’’ (5Ft) Hoses Coded In Red, Blue And Yellow, And All Completed With Compact Ball Valve And Metal Handles On Each Hose. The Coupler Nuts Are Deeply Knurled For Quick Finger-Tightening..
✈ High Working Pressure The Working Pressure Of 410A Refrigerant Charging Hoses Can Get 800Psi, It’S Higher Than That Of R134a Charging Hose (600 Psi), Burst Pressure 4000 Psi. If Your Hose Working Pressure Is Only 600Psi, Please Don't Apply It In R410a Refrigerant Charging..
Features
- WIDE APPLICATION HVAC hoses with low loss fittings (yellow, blue, and red hoses) are suit for 1/4" SAE refrigerant permutation, HVAC, car air condition maintenance and coolant or frozen adding. Such as R134A R12 R22 R502 R410A R404.
- HIGH WORKING PRESSURE The working pressure of 410A refrigerant charging hoses can get 800PSI, it s higher than that of R134A charging hose (600 PSI), burst pressure 4000 PSI. If your hose working pressure is only 600PSI, please don't apply it in R410A refrigerant charging.
- PREMIUM QUALITY Refrigerant charging hose set with shut-off ball valve is made of high quality brass alloy and rubber, last long; easy to operate and install, strong sealing for durability and safety.
- SET OF THREE HOUSE 3 pieces 60 (5ft) hoses coded in red, blue and yellow, and all completed with compact ball valve and metal handles on each hose. The coupler nuts are deeply knurled for quick finger-tightening.
- PACKAGE INCLUDED This hose kit for HVAC 410A come with red, blue and yellow 60 hose with ball valve, 1 pc valve core remover, 2pcs thimbles and 6pcs rubber gaskets.
- See more on Amazon...
Brand: Aupoko | Manufacturer: Aupoko
See On Amazon #15
Lichamp 4 Pieces 5FT AC Manifold Gauge Hose Kit with 4 Pieces AC adapters Fits R134A R410A R404A R12 R22 R502 R1234YF Refrigerants
Asin: B08B43XBDV | Ean: 0791533865395 | UPC: 791533865395
Standard 1/4 Inch Female Flare Fittings (1/4 To 1/4 Inch Fitting For Black Hose) With A Valve Core Depressor And 45° Bend On One End For Convenient Access To The System, Extra 4 Pieces Adapters Ensure That Most Interfaces Can Be Connected..
Coupler Nuts Feature Deep Knurling For A Positive Grip That Enables Quick Finger-Tightening, Hose Ends Feature A Strong Six-Sided Crimp That Provides A Secure, Reliable Connection Between The Hose And Barb - Even At Maximum Pressure..
Long Lasting And Rugged Neoprene Coating Offers Flexibility And Wear Resistance Ensuring Long Life And Dependability..
5Ft Long Hose Kit Feature A 4000 Psi Burst Pressure And 800 Psi Max Working Pressure, Suit For Most Of Ac Hvac Check And Charge Project..
Features
- Professional ac hose kit for working with ac hvac air conditioner manifold gauge, fits R134A R410A R404A R12 R22 R502 R1234YF type refrigerants.
- 5FT long hose kit feature a 4000 psi burst pressure and 800 psi max working pressure, Suit for most of ac HVAC check and charge project.
- Standard 1/4 inch female flare fittings (1/4 to 1/4 inch fitting for black hose) with a valve core depressor and 45 bend on one end for convenient access to the system, extra 4 pieces adapters ensure that most interfaces can be connected.
- Long lasting and rugged neoprene coating offers flexibility and wear resistance ensuring long life and dependability.
- Coupler nuts feature deep knurling for a positive grip that enables quick finger-tightening, hose ends feature a strong six-sided crimp that provides a secure, reliable connection between the hose and barb - even at maximum pressure.
- See more on Amazon...
Brand: Lichamp | Manufacturer: Lichamp
Dimensions: 1.77 x 8.39 x 10.63 inches | Weight: 1.98 Pounds
See On Amazon #16
Refrigerant Charging Hose with Ball Valve Apply to R134A R12 R22 R502 R404 Refrigerant Air Conditioning Manifold Gauge 1/4" Thread Hose Set 60" Red/Yellow/Blue (Pack of 3)
Asin: B07Q7RRVGS | Model: OEM-20190330-3 | PartNumber: OEM-20190330-3 | Ean: 8431276437740
Refrigerant Charging Hose With Compact Ball Valve Deigned To Meet 1/4" Sae Requirement For Refrigerant Permutation, Fit Most Refrigerants Like R134a, R22, R12, R502,R404.Standard 1/4 Inch Female Flare Fittings With A Valve Core Depressor And 45°Bend On One End For Convenient Access To The System.
Satisfactory Service, If You Have Any Questions, Please Feel Free To Contact Us By Email!We Will Solve It For You In The First Time!.
Refrigerant Anti Blowback Fittings Refrigeration Charging Hoses Valve Discharge Conditioning Refrigerant Charging Refrigerant Discharge Recharge Yellow Jacket Interdynamics Conditioning Recharge Bundle Refrigerant Liquid Hose.
Easy To Operate And Install,Strong Sealing For Durability And Safety.Necessary Tools For Hvac,Car Air Condition Maintenance And Coolant Or Freon Adding..
Features
- 60 inch long,1/4 inch yellow,blue,and red hoses feature a 600 PSI working pressure and 3000 PSI burst pressure - ideal for standard refrigerants
- Easy to operate and install,strong sealing for durability and safety.Necessary tools for HVAC,car air condition maintenance and coolant or Freon adding.
- Refrigerant charging hose with compact ball valve deigned to meet 1/4 SAE requirement for refrigerant permutation, fit most refrigerants like R134A, R22, R12, R502,R404.Standard 1/4 inch female flare fittings with a valve core depressor and 45 bend on one end for convenient access to the system
- Refrigerant anti blowback fittings refrigeration charging hoses valve discharge conditioning refrigerant charging refrigerant discharge recharge yellow jacket interdynamics conditioning recharge bundle refrigerant liquid hose
- Satisfactory service, if you have any questions, please feel free to contact us by email!We will solve it for you in the first time!
- See more on Amazon...
Brand: LIYYOO | Manufacturer: LIYYOO
Dimensions: 0.04 x 60.00 x 0.25 inches
See On Amazon #17
JIFETOR AC Charge Hose with Gauge for R134A, Car HVAC Refrigerant Recharge Kit, Home Air Conditioning U Charging Hose Low Pressure Measuring Meter 1/4 inch Fittings Can Tap Quick Coupler, 42 inch Long
Asin: B08BC8M4MK | Model: JT014S3 | PartNumber: JT014S3 | Ean: 0690770904099 | UPC: 690770904099
Brass Quick Coupler: Premium Brass And Aluminum, Quick Interface Design With Accurate Snap Lock And Anti-Slip Knurled Grip Ring, Easy To Connect And Disconnect, Compatible With All Models With Standard R134a Low Pressure Side Suction Service Port. Aim At R134a Suction Service Port, Push To Connect And Lock. Pull Up The Knurled Grip Ring To Loose And Lift To Disconnect..
Measure Pressure And Recharge R134a: Start The Car, Open Ac To Max. Clockwise Twist T Handle To Close Can Tap, Connect The Quick Coupler And Car Ac Suction Service Port To Measure The Pressure. The Reading Is Right Only When Ac Compressor Is Working. If Need To Charge The Refrigerant, Please Compare To The Manufacturer's Recommended Readings, Choose The Appropriate Amount Refrigerant Can, To Ensure There Is No Leftover In The Can..
Simple R134a Charging Tool: This Air Conditioning Refrigerant Charge Hose Gauge Is Very Simple, Only 42 Inch Long And Equipped With Gauge Can Tap Quick Coupler. Also It Is Very Easy To Operate Dynamic Pressure Measurement And Refrigerant Charging From Auto Low Pressure Suction Service Port..
Can Tap: Brass Can Tap With 1/2 Inch Female Thread Interface, Can Screw To Fix On 1/2 Inch Male Thread Of Refrigerant Bottle Opening. T Type Knobs, Easy To Operate By Fingertips. Internal Pin With Sharp Tip Help To Pierce Refrigerant Bottle Easily And Quickly. Equipped With 1/4 Inch Male Flare On The Side, To Hook Directly To 1/4 Inch Female Fittings Of Ac Refrigerant Charging Hose.
Refrigerant Charging Gauge: Ac Low Pressure Gauge With Scale Range -30Inhg~250Psi, Is Equipped With Metal 2-3/4 Inch Big Dial, Color Coded Scale To Indicate Pressure Index For R134a, Celsius Unit, For Monitoring The Air Conditioning Low Pressure Side Pressure Easily. Built In Calibration Screw And No-Flutter Pointer Insure A Accurate Refrigerant Recharge. (Note: Use Valve Core Tool To Unscrew The Valve Core Thimble A Little Bit If The Hose Angled Connector Would Not Depress The Schrader Valve).
Features
- AC U Charge Hose: Refrigerant charging hose uses rubber nylon resin material hoses, featured with anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing. Max working pressure is 500PSI and burst pressure is upto 2500PSI. The total length is 42 inch, with one side 1/4 inch female fittings connected with R134a can tap, and the other side 1/4 inch female fittings for R134A quick coupler or connect AC service port directly
- Refrigerant Charging Gauge: AC low pressure gauge with scale range -30inHg~250PSI, is equipped with metal 2-3/4 inch big dial, color coded scale to indicate pressure index for R134A, Celsius unit, for monitoring the air conditioning low pressure side pressure easily. Built in calibration screw and no-flutter pointer insure a accurate refrigerant recharge. (NOTE: Use valve core tool to unscrew the valve core thimble a little bit if the hose angled connector would not depress the Schrader valve)
- Brass Quick Coupler: Premium brass and aluminum, quick interface design with accurate snap lock and anti-slip knurled grip ring, easy to connect and disconnect, compatible with all models with standard R134A low pressure side suction service port. Aim at R134A suction service port, push to connect and lock. Pull up the knurled grip ring to loose and lift to disconnect.
- Can Tap: Brass can tap with 1/2 inch female thread interface, can screw to fix on 1/2 inch male thread of refrigerant bottle opening. T type knobs, easy to operate by fingertips. Internal pin with sharp tip help to pierce refrigerant bottle easily and quickly. Equipped with 1/4 inch male flare on the side, to hook directly to 1/4 inch female fittings of AC refrigerant charging hose
- Measure Pressure and Recharge R134A: Start the car, open AC to MAX. Clockwise twist T handle to close can tap, connect the quick coupler and car AC suction service port to measure the pressure. The reading is right only when AC compressor is working. If need to charge the refrigerant, please compare to the manufacturer's recommended readings, choose the appropriate amount refrigerant can, to ensure there is no leftover in the can.
- Simple R134A Charging Tool: This air conditioning refrigerant charge hose gauge is very simple, only 42 inch long and equipped with gauge can tap quick coupler. Also it is very easy to operate dynamic pressure measurement and refrigerant charging from auto low pressure suction service port.
- See more on Amazon...
Brand: JIFETOR | Manufacturer: JIFETOR
Weight: 0.88 Pounds
Warranty: 30 days full refund with returned undamaged JIFETOR product. Any quality related problem in 1 year, we will replace the fittings for free or refund. Any question, please feel free to contact us by amazon message system.
See On Amazon #18
Lichamp 3 Pieces 5FT AC HVAC Manifold Gauge Hose Kit with Ball Valve and 4 Pieces Hose Adapters Fits R134A R410A R404A R12 R22 R502 R1234YF Refrigerants
Asin: B08B43QBN2 | Model: AGH-350100 | PartNumber: AGH-350100 | Ean: 0791533865371 | UPC: 791533865371
Standard 1/4 Inch Female Flare Fittings With A Valve Core Depressor And 45° Bend On One End Ball Valve For Convenient And Safe Access To The System, Extra 4 Pieces Adapters Ensure That Most Interfaces Can Be Connected..
Coupler Nuts Feature Deep Knurling For A Positive Grip That Enables Quick Finger-Tightening, Hose Ends Feature A Strong Six-Sided Crimp That Provides A Secure, Reliable Connection Between The Hose And Barb - Even At Maximum Pressure..
Long Lasting And Rugged Neoprene Coating Offers Flexibility And Wear Resistance Ensuring Long Life And Dependability..
5Ft Long Hose Kit With Ball Valve End Feature A 4000 Psi Burst Pressure And 800 Psi Max Working Pressure, Suit For Most Of Ac Hvac Check And Charge Project..
Features
- Professional ac hose kit for working with ac hvac air conditioner manifold gauge, fits R134A R410A R404A R12 R22 R502 R1234YF type refrigerants.
- 5FT long hose kit with ball valve end feature a 4000 psi burst pressure and 800 psi max working pressure, Suit for most of ac hvac check and charge project.
- Standard 1/4 inch female flare fittings with a valve core depressor and 45 bend on one end ball valve for convenient and safe access to the system, extra 4 pieces adapters ensure that most interfaces can be connected.
- Long lasting and rugged neoprene coating offers flexibility and wear resistance ensuring long life and dependability.
- Coupler nuts feature deep knurling for a positive grip that enables quick finger-tightening, hose ends feature a strong six-sided crimp that provides a secure, reliable connection between the hose and barb - even at maximum pressure.
- See more on Amazon...
Brand: Lichamp | Manufacturer: Lichamp
See On Amazon #19
R410A AC Refrigerant Charging Hoses, 59 HVAC Charging Hose with 1/4 SAE Female Flare, 800PSI Working Pressure for R410A R22 R134A R12 R502 Air Condition System Maintenance
Asin: B085VZ28HM | Model: R134A AC Refrigerant Charging Hose | PartNumber: R134A AC Refrigerant Charging Hose
[Well Design] Hvac Hose Designed To Features With 45 Degrees Angle On The Service Port Site For Easier Access, Thread Size 1/4’’ Sae Male And Female Flare. Meet 1/4" Sae Requirement For Refrigerant Permutation..
[Package Include] 1Pc X R410 Ac Charging Hose. If You Have Any Problem Or Concerns, Feel Free To Contact Us..
[Premium Quality] The Ac Charging Hose Made Of Brass And Rubber, Premium Refrigerant Charging Hoses Last Long; Easy To Operate And Install, Strong Sealing For Durability And Safety..
[High Working Pressure] The Working Pressure Of R410 Refrigerant Charging Hoses Can Get 800Psi, Burst Pressure 4000 Psi..
Features
- [WIDE APPLICATION] The ac hose with low loss fittings good for R410a and most other refrigerants like R22, R134a, R12, R502.
- [HIGH WORKING PRESSURE] The working pressure of R410 Refrigerant Charging hoses can get 800PSI, burst pressure 4000 PSI.
- [WELL DESIGN] HVAC Hose designed to features with 45 degrees angle on the service port site for easier access, thread size 1/4 SAE male and female flare. Meet 1/4 SAE Requirement for Refrigerant Permutation.
- [PREMIUM QUALITY] The ac charging hose made of brass and rubber, premium refrigerant charging hoses last long; easy to operate and install, strong sealing for durability and safety.
- [PACKAGE INCLUDE] 1Pc x R410 AC Charging Hose. If you have any problem or concerns, feel free to contact us.
- See more on Amazon...
Brand: gohantee | Manufacturer: gohantee
Dimensions: 0.04 x 7.87 x 7.56 inches
See On Amazon #20
Hromee AC Refrigerant Hose, 60 Inch HVAC Charging Hose with 1/4 SAE Flare, 800 PSI Working Pressure for Air Condition System
Asin: B0CNCRNLGT | Model: HR4143 | PartNumber: HR4143
The Special Rubber Compound Is Extremely Durable Due To Its High Pressure Resistance And Low Embrittlement. The Lifetime Of Ptfe-Gasket Compared To Ordinary Rubber Is At Least 10 Times Longer..
Strong Six-Sided Crimp Provides A Secure, Reliable Connection Between The Hose And Barb - Even At Maximum Pressure..
The Brass Connector Is Corrosion-Resistant, Durable To Use And The Other Brass Connector Has A 45 Degree Angle, Which Make It Easier To Connect To The Air Conditioning System. The Knurl On The Surface Of Connector Can Provide A Fast And Easy Connection..
High Quality Charging Hose For All Common Refrigerants With 1/4" Sae Fittings. All Hoses Are Equipped With Neoprene Seals..
Features
- The refrigerant charging hose is a necessary tools for adding refrigerant into air conditioning system during installation and maintenance. Also, it is suitable for many kinds of refrigerant. Whether it is a automotive air conditioner or a room air conditioner, the refrigerant charging hose can work with a good performance.
- High quality charging hose for all common refrigerants with 1/4 SAE fittings. All hoses are equipped with neoprene seals.
- The special rubber compound is extremely durable due to its high pressure resistance and low embrittlement. The lifetime of PTFE-gasket compared to ordinary rubber is at least 10 times longer.
- The brass connector is corrosion-resistant, durable to use and the other brass connector has a 45 degree angle, which make it easier to connect to the air conditioning system. The knurl on the surface of connector can provide a fast and easy connection.
- Strong six-sided crimp provides a secure, reliable connection between the hose and barb - even at maximum pressure.
- See more on Amazon...
Brand: Hromee | Manufacturer: Hromee
Dimensions: 0.10 x 60.00 x 1.00 inches | Weight: 0.25 Pounds
See On Amazon
Looking For Something Else?
Search