Titan Premium 2 in. Sealed 6200ZZ Nylon Garage Door Roller with 4 in. Corrosion Resistant Stem (10-Pack)
Asin: B09118Q461
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Snap-In Protective Caps: Front And Back Sealed Caps Prevents Dust & Grime From Penetrating Roller.
100% Lifetime Guarantee: In The Rare Event A Roller Fails, We Will Send You A New Roller.
Corrosion Resistant: 3X Coated Black-Oxide Stem Is Perfect For Homes In Moisture-Heavy Regions.
Durable: 6200Zz Bearing Rated 25X Standard Roller For 250,000 Door Open And Close Cycles At 110 Lb. Load Providing Maximum Durability.
Features
- Quiet: Nylon Wheel reduces garage door noise by at least 75% compared to standard steel rollers
- Durable: 6200ZZ Bearing rated 25x standard roller for 250,000 door open and close cycles at 110 lb. load providing maximum durability
- Snap-In Protective Caps: Front and back sealed caps prevents dust & grime from penetrating roller
- Corrosion Resistant: 3x Coated Black-Oxide Stem is perfect for homes in moisture-heavy regions
- 100% Lifetime Guarantee: In the rare event a roller fails, we will send you a new roller
- See more on Amazon...
Brand: DURA-LIFT | Manufacturer: DURA-LIFT
Weight: 3.03 pounds
See On Amazon Similar To Titan Premium 2 in. Sealed
#1
Nilight 2PCS 16Inch 11 LED Red Trailer Light Bar for Park Stop Turn signals Tail Brake Light DOT Compliant IP65 Waterproof Truck Trailer Marker ID Bar, 2 Years Warranty
Asin: B07V7BF18S | Model: TL-10 | PartNumber: TL-10 | Ean: 0767912577203 | UPC: 767912577203
Easy Wire Connection For Wire Connection White Wire For Ground Black Wire For Low Brightness Tail Light And Red Wire For High Brightness Brake Light.
Wide Application Can Be Perfectly Used On Most 12V Heavy Duty Trucks, Semi Trailers, Cargo Trailers, Boat Trailers, Travel Trailers, Horse Trailers, Rv Camper Work Vehicles, Etc. Package Include 2Pcs Trailer Marker Id Bar With 2 Hardware Pack. 2 Years Warranty Honored By Nilight..
Light Bar Mounting To Flush-Mounting The Light One Option Is To Drill A Center Hole Or Use The Existing Hole To Go Through The Back Wire Lead And Then Fix The Two Ends By Drilling In The Two Screws Provided The Other Option Is To Add Some Washer When Fixing The Two Ends Or Use A Bracket To Mount The Light To Avoid Drilling Holes For The Back Wire Lead.
Highly Sealed & Durable The Front Polycarbonate Lens Is Sonically Welded To The Housing And The Back Wire Lead Is Add On Glue To Make Sure The Light Is Completely Sealed Waterproof Enough To Withstand All Weather Abuse.
Features
- Multi-functions Each light has 11 high quality LED outputs high brightness and low brightness Can functions perfectly as parking light stop light turn signal light tail light and brake light
- Highly Sealed & durable The front Polycarbonate lens is sonically welded to the housing and the back wire lead is add on glue to make sure the light is completely sealed Waterproof enough to withstand all weather abuse
- Easy Wire Connection For wire connection white wire for ground black wire for low brightness tail light and red wire for high brightness brake light
- Light Bar Mounting To flush-mounting the light one option is to drill a center hole or use the existing hole to go through the back wire lead and then fix the two ends by drilling in the two screws provided The other option is to add some washer when fixing the two ends or use a bracket to mount the light to avoid drilling holes for the back wire lead
- Wide Application Can be perfectly used on most 12V heavy duty trucks, semi trailers, cargo trailers, boat trailers, travel trailers, horse trailers, RV camper work vehicles, etc. Package Include 2PCS trailer marker ID bar with 2 hardware pack. 2 Years Warranty Honored by Nilight.
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Weight: 0.57 Pounds
Warranty: 2 Years Warranty
See On Amazon #2
Nilight 12 Inch 72W LED Light Bars Spot Flood Combo Off-Road Light Mounting Bracket Horizontal Bar Tube Clamp With Off Road Wiring Harness, 2 Years Warranty
Asin: B074CSBDRC | Model: ZH062 | PartNumber: ZH062 | Ean: 0600537014107 | UPC: 600537014107
Rubber Inserts: High-Quality Rubber Inserts Help Dampen Vibrations During Off-Roading And Protect Your Bull Bar From Being Scraped.
Package Include: 1Pc 72W Led Light Bar, 2Pcs Led Light Bar Mounting Bracket Kits And 1Pc Wiring Harness.
Fit Type: Universal Fit,2 Years Warranty By Nilight.
Superior Quality Wires: Good Electrical Conductivity, High Temperature And Melting Resistant, Outstanding Bending Performance..
Sturdy Bracket: Strong Aluminum Alloy, Fix The Light On Tube Firmly; Pre-Drilled Hole, Allows More Lights To Be Added On Vehicle Without Drilling.
Features
- EXCELLENT LIGHTING EFFECT: Combination of bright spot and flood beam, further irradiation distance and wide range of light for broad view area
- STURDY BRACKET: Strong aluminum alloy, fix the light on tube firmly; pre-drilled hole, allows more lights to be added on vehicle without drilling
- RUBBER INSERTS: High-quality rubber inserts help dampen vibrations during off-roading and protect your bull bar from being scraped
- SUPERIOR QUALITY WIRES: Good electrical conductivity, high temperature and melting resistant, outstanding bending performance.
- PACKAGE INCLUDE: 1PC 72W LED light bar, 2PCS LED light bar mounting bracket kits and 1PC wiring harness
- Fit type: Universal Fit,2 Years Warranty by Nilight
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Dimensions: 5.39 x 17.99 x 5.51 inches | Weight: 0.51 pounds
Warranty: 2 Years Warranty
See On Amazon #3
2PCS Car Exhaust Gasket, Ultra Seal 2-Bolt 2-Inch Exhaust Flange Gasket Standard Exhaust Gasket, Reinforced High Temperature Gasket Exhaust Flange Gasket Car Accessories
Asin: B0CTY91BNB | Model: 2IN | PartNumber: 2IN
【Effective Sealing】:Exhaust Flange Gaskets Have Excellent Sealing Performance To Ensure That Exhaust Gases Do Not Leak, And Also Help To Reduce Engine Noise And Improve Fuel Efficiency, Thus Keeping The Engine Working Efficiently And Extending The Service Life Of The Engine Cylinder Head..
【Easy Installation】:Package Includes 2X Muffler Gaskets, Quick And Easy To Install; Place The Muffler Gasket On The Connector, Align The Piston Holes, Make Sure The Screw Holes Are Lined Up With The Exhaust Pipe Threaded Holes, And Slowly Tighten The Nut To Ensure The Gasket Is Secure..
【Widely Application】:The Exhaust Gaskets Are Widely Used For Piping Connections For Exhaust, Turbochargers, Mufflers, And Other Equipment. Suitable For Most Exhaust Pipe Sealing Uses..
【Premium Material】:In This Car Exhaust Gasket, The Upper And Lower Layers Are Galvanized Sheets, And The Middle Is Graphite Asbestos, High Temperature, High Pressure, Wear-Resistant, Anti-Rust And Anti-Corrosion, Sturdy, To Ensure Long Service Life..
Features
- Buyer's Guide : The car exhaust gasket size is 4.33"L x 2.79"W x 0.08"H, 1.97" ID. The longest distance between the two holes is 3.93in, and the shortest is 2.77in. Please check carefully if our gaskets fit your car before purchasing.
- Premium Material :In this car exhaust gasket, the upper and lower layers are galvanized sheets, and the middle is graphite asbestos, high temperature, high pressure, wear-resistant, anti-rust and anti-corrosion, sturdy, to ensure long service life.
- Effective Sealing :Exhaust flange gaskets have excellent sealing performance to ensure that exhaust gases do not leak, and also help to reduce engine noise and improve fuel efficiency, thus keeping the engine working efficiently and extending the service life of the engine cylinder head.
- Widely Application :The exhaust gaskets are widely used for piping connections for exhaust, turbochargers, mufflers, and other equipment. Suitable for most exhaust pipe sealing uses.
- Easy Installation :Package includes 2x muffler gaskets, quick and easy to install; Place the muffler gasket on the connector, align the piston holes, make sure the screw holes are lined up with the exhaust pipe threaded holes, and slowly tighten the nut to ensure the gasket is secure.
- See more on Amazon...
Brand: JOYCOURT | Manufacturer: JOYCOURT
Warranty: 0.2
See On Amazon #4
Nilight 20 Inch 126W Spot Flood Combo LED Light Bars Off-Road Light Mounting Bracket Horizontal Bar Tube Clamp with Off Road Wiring Harness, 2 Years Warranty, White
Asin: B074CS4NXM | Model: ZH063 | PartNumber: ZH063 | Ean: 0600537014114 | UPC: 600537014114
Sturdy Bracket: Strong Aluminum Alloy, Fix The Light On Tube Firmly; Pre-Drilled Hole, Allows More Lights To Be Added To Vehicle Without Drilling.
Package Include: 1Pc 126W Led Light Bar, 2Pcs Led Light Bar Mounting Bracket Kits And 1Pc Wiring Harness,2 Years Warranty By Nilight.
Rubber Inserts: High-Quality Rubber Inserts Help Dampen Vibrations During Off-Roading And Protect Your Bull Bar From Being Scraped.
Perfect Combo Beam: Excellent Visual Effect, Spot Beam For Long Distance Illumination, Flood Beam For Broad View Area.
Features
- SUPER BRIGHT LIGHT: High quality LED chips, powerful and bright light beam, let you see the forward dark road clearly
- PERFECT COMBO BEAM: Excellent visual effect, spot beam for long distance illumination, flood beam for broad view area
- STURDY BRACKET: Strong aluminum alloy, fix the light on tube firmly; pre-drilled hole, allows more lights to be added to vehicle without drilling
- RUBBER INSERTS: High-quality rubber inserts help dampen vibrations during off-roading and protect your bull bar from being scraped
- PACKAGE INCLUDE: 1PC 126W LED light bar, 2PCS LED light bar mounting bracket kits and 1PC wiring harness,2 Years Warranty by Nilight
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Warranty: 2 Years Warranty
See On Amazon #5
15 LED Red Lens Brake Light Trailer Hitch Cover, Universal Fit 2" Receiver, Super Bright Smoked Lens Square Tail Light, Car Exterior Accessories for Towing Truck SUV RV (Smoked Lens Red Light)
Asin: B0BPLJMFHQ | Model: Brake Light | PartNumber: Brake Light
【Durable Abs Material】: The Tow Hitch Mounted Led Brake Light Is Made Of Waterproof Abs Material, Which Has Excellent Sealing Properties. It Will Not Malfunction Even When Working In A Wet Environment For A Long Time. High-Quality Led Bulbs Have A Very Long Lifespan, And You Don't Have To Worry About Short Circuits Or Other Safety Hazards..
【Buy With Confidence】: We Strive To Constantly Innovate To Meet Our Customers' Needs And Provide Them With Better Products..
【Easy To Use】: Plug And Play. Protect Your Trailer Receiver From Rust, Mud And Corrosion Without Complicated Installation Procedures. The Perfect 3.26 X 3.54 Inch Design Will Fit Perfectly In Your Car And Let Other Drivers Know Better When You Are Stopping, Turning Or Changing Lanes..
【Compatibility】: The Trailer Lights Fit The 2" Tralier Hitch Receiver With A Standard 4-Pin Trailer Adapter For The Led Brake Light To Power. It Is Widely Used For Diving Trailers, Trucks, Off-Road Vehicles, Motorcycles, Trucks, Construction Vehicles, Excavators, Mud Trucks, Logging Trucks, Etc. Equipped With A 24.40-Inch Wire, The Sufficient Length Is Very Convenient For You To Use..
Features
- Super Bright 15-LED : Trailer hitch brake light has 15 built-in high-brightness LED lights, which can enhance the lighting to avoid traffic accidents in bad weather. It can also be used as a stop/brake light, turn signal light, reverse light, boat trailer tail light, submersible trailer light, rear trailer light, running light. Power: 0.12W for driving, 1.08W for braking. Note: If it doesn't work after you install it, please check if the voltage used is 12V.
- Compatibility : The trailer lights fit the 2 Tralier hitch receiver with a standard 4-pin trailer adapter for the LED brake light to power. It is widely used for diving trailers, trucks, off-road vehicles, motorcycles, trucks, construction vehicles, excavators, mud trucks, logging trucks, etc. Equipped with a 24.40-inch wire, the sufficient length is very convenient for you to use.
- Durable ABS Material : The tow hitch mounted LED brake light is made of waterproof ABS material, which has excellent sealing properties. It will not malfunction even when working in a wet environment for a long time. High-quality LED bulbs have a very long lifespan, and you don't have to worry about short circuits or other safety hazards.
- Easy to Use : Plug and Play. Protect your trailer receiver from rust, mud and corrosion without complicated installation procedures. The perfect 3.26 x 3.54 inch design will fit perfectly in your car and let other drivers know better when you are stopping, turning or changing lanes.
- Buy with Confidence : We strive to constantly innovate to meet our customers' needs and provide them with better products.
- See more on Amazon...
Brand: AICEL | Manufacturer: AICEL
Dimensions: 1.00 x 2.00 x 1.00 inches
See On Amazon #6
ESEWALAS Brake Bleeder Kit,Brake Bleeder Vacuum Pump Kit with Adapters,Car Accessories 2 in 1 Brake Fluid Bleeder Kit Hand held Vacuum Pump Test Set,Car Brake Clutch Bleeder Tool
Asin: B0CCRR589M | Model: 736SDZKB001 | PartNumber: 736SDZKB001
[Two In One Tool]The Manual Brake Bleeding Kit Allows You To Bleed The Brakes, Test The Vacuum Reading Through A Pressure Gauge, And Pump Out Oil, Power Steering Fluid, And Many Other Types Of Fluids. Can Be Used For Brake And Clutch Wheel Cylinders/Calipers, Master Cylinders Or Slave Cylinders. Flush The Old Brake Fluid And Air, And Guide The New Brake Fluid To Fill The Brake System..
[Widely Applicable] The Clutch Deflation Tool Is Very Suitable For Household And Commercial Applications, And Can Be Used For Testing And Diagnosing Various Parts And Common Systems On Bicycles, Motorcycles, Trucks, Pickup Trucks, Or Any Other Vehicle. It Can Also Be Used To Test Household Kitchen Vacuum Sealers, For Sealing Food Cans, Spherical Tanks, And Vacuum Bags..
[Easy To Carry] The 2-In-1 Handheld Vacuum Pump Brake Bleeding Kit Is Paired With A Suitcase, Making Tools Tidy And Easy To Carry..
[Accessories] The Brake Bleed Kit Is Equipped With A Vacuum Gauge To Facilitate Reading The Pressure. The Pressure Range Is 0-30 Inch Of Mercury, 0-760Mm Of Mercury. 4 Pipes Of Different Lengths To Meet Different Needs. We Add A Spare O-Ring For Each Product..
Features
- [High Quality Materials]Our pipes are made of high-quality PVC, with high elasticity, heat resistance, and maximum sealing performance; Metal components are made of alloy and copper, which have strong corrosion resistance. The brake bleed kit is durable.
- [Accessories] The brake bleed kit is equipped with a vacuum gauge to facilitate reading the pressure. The pressure range is 0-30 Inch of mercury, 0-760mm of mercury. 4 pipes of different lengths to meet different needs. We add a spare O-ring for each product.
- [Two in One Tool]The manual brake bleeding kit allows you to bleed the brakes, test the vacuum reading through a pressure gauge, and pump out oil, power steering fluid, and many other types of fluids. Can be used for brake and clutch wheel cylinders/calipers, master cylinders or slave cylinders. Flush the old brake fluid and air, and guide the new brake fluid to fill the brake system.
- [Easy to Carry] The 2-in-1 handheld vacuum pump brake bleeding kit is paired with a suitcase, making tools tidy and easy to carry.
- [Widely Applicable] The clutch deflation tool is very suitable for household and commercial applications, and can be used for testing and diagnosing various parts and common systems on bicycles, motorcycles, trucks, pickup trucks, or any other vehicle. It can also be used to test household kitchen vacuum sealers, for sealing food cans, spherical tanks, and vacuum bags.
- See more on Amazon...
Brand: ESEWALAS | Manufacturer: ESEWALAS
Warranty: no
See On Amazon #7
30PCS Hood Panel Insulation Seal Retainer Clip Compatible with Buick Cadillac Chevy GMC Hummer Honda Escalade Oldsmobile Pontiac Saturn 3078511 3977775
Asin: B0CKDYB313 | Model: TOP-90467A0005 | PartNumber: TOP-90467A0005
Easy To Install Fast And Tight Fastening Without Complicated Installation Steps..
Include: 30Pcs Nylon Clips To Meet Your Daily Needs, You Can Also Give To Friends And Family..
Other Names: Hood Insulation Clips, Seal Retainer, Engine Coolant Reservoir Clip, Trunk Side Trim Retainer, Insulator Clip, Seal To Cowl Retainer..
Replaces Gm 3078511 3977775, Note: Measure The Diameter Of The Space The Fastener.
Features
- Size: Head Diameter: 2"; Stem Diameter: 5/16"; Stem Length: 3/4"; Overall Length: 25/32"; Hole Size: 1/4"
- Replaces GM 3078511 3977775, NOTE: Measure the diameter of the space the fastener
- Easy to install fast and tight fastening without complicated installation steps.
- Other names: Hood Insulation Clips, Seal Retainer, Engine Coolant Reservoir Clip, Trunk Side Trim Retainer, Insulator Clip, Seal To Cowl Retainer.
- Include: 30pcs nylon clips to meet your daily needs, You can also give to friends and family.
- See more on Amazon...
Brand: TOPCNOEM | Manufacturer: TOPCNOEM
See On Amazon #8
NGHEY Pack-1 Car Chrome Trim Molding, 0.78" x 16.4Ft Body Window Seal Rubbing Strip, Bumper Anti-Collision Strip, Universal for Auto DIY Shiny Self-Adhesive Strip (Bright Black)
Asin: B0C5WRYV1D | Model: NGZST1200BL-5M | PartNumber: NGZST1200BL-5M
Protection: These Trims Are Designed To Provide Superior Protection To The Sides Of Your Vehicle, Protecting The Body From Scratches And Impacts. These Trim Strips Can Be Trimmed Or Cut To The Desired Length And Are Very Easy To Apply. In Addition, They Are Flexible Around The Body Lines And Have Uv Protection For Long Life..
Wide Range Of Applications: The Multifunctional Trim Strip Is Suitable For Both Exterior And Interior Decoration Of Cars. Suitable For Car Sides, Bumpers, Grilles, Roofs, Windows, Hoods, Tailgates, Side Mirrors, Steering Wheels, Headlights And Taillights, Fenders, Center Consoles, Dashboards And Household Furniture Surfaces..
Easy To Install: The Installation Process Is Quick And Easy, With No Cutting Or Drilling Required. To Use, Simply Peel Off The Adhesive On The Back And Stick Them In The Right Place, Very Easy. They Will Be The Perfect Addition To Your Vehicle's Chrome Trim. You Can Also Give It To Your Family Or Friends..
High-Quality Materials: This Car Bumper Sticker Is Made Of High Quality Chrome Plating, Soft Plastic Pvc Material And Silver Edge Wrapping Process. It Does Not Fade, Does Not Deform, Is Waterproof And Has A Long Service Life. It Can Be Used On Any Flat Surface Of The Car. Provides A Stylish Accent To Your Vehicle's Exterior With Self-Adhesive Properties..
Features
- Package Contents: This body bumper measures 0.78" x 16.4Ft and you can choose your favorite color. Its bright colors can beautify the interior or exterior of your car, making your car more stylish and unique. It can be used anywhere you can imagine, and it improves the appearance of items that appear clean and tidy.
- High-quality Materials: This car bumper sticker is made of high quality chrome plating, soft plastic PVC material and silver edge wrapping process. It does not fade, does not deform, is waterproof and has a long service life. It can be used on any flat surface of the car. Provides a stylish accent to your vehicle's exterior with self-adhesive properties.
- Protection: These trims are designed to provide superior protection to the sides of your vehicle, protecting the body from scratches and impacts. These trim strips can be trimmed or cut to the desired length and are very easy to apply. In addition, they are flexible around the body lines and have UV protection for long life.
- Easy to Install: The installation process is quick and easy, with no cutting or drilling required. To use, simply peel off the adhesive on the back and stick them in the right place, very easy. They will be the perfect addition to your vehicle's chrome trim. You can also give it to your family or friends.
- Wide Range of Applications: The multifunctional trim strip is suitable for both exterior and interior decoration of cars. Suitable for car sides, bumpers, grilles, roofs, windows, hoods, tailgates, side mirrors, steering wheels, headlights and taillights, fenders, center consoles, dashboards and household furniture surfaces.
- See more on Amazon...
Brand: NGHEY | Manufacturer: NGHEY
Warranty: Manufacturer warranty for 30 days from date of purchase.
See On Amazon #9
AICEL 8 PCS American Flag Auto Tire Valve Caps, Aluminum Alloy Car Tire Valve Stem Covers, Dust Proof Air Valve Lids Fit for Car, SUV, Bicycle, Truck, Universal Vehicle Accessories (Black)
Asin: B0C49FTPY5 | Model: Valve Caps | PartNumber: Valve Caps
【Easy To Load And Unload】: We Have These Tire Valves With Different Shapes On The Outside And Threaded On The Inside, Easy To Install, Easy To Grip And Also Easy To Remove When You Want To Check The Air Pressure. The Non-Slip Grip Is Easier To Screw On Or Screw Off And Won't Take Much Of Your Time Or Physical Effort..
【Highly Versatile】: Tire Valves Are Universally Available For Standard Us Valves, Including Cars, Suvs, Trucks, Rvs, Bicycles, Motorcycles And Other Motor Vehicles, Etc. They Are Suitable For Use On Most Vehicles. If You Have More Than One Type Of Vehicle In Your Home, This Valve Cap Is A Great Convenience For Daily Use And Replacement..
【Protection Accessories】: The Car Valve Cap Has A Rotating Thread Structure Inside, Which Can Be Tightly Fastened With The Tire Valve To Prevent The Valve From Leaking And Make A Better Seal. And To Protect The Valve Core From Corrosion Due To Direct Contact With Mud, Water And Snow, Extending The Service Life Of The Tire..
【Durable Materials】:Tire Valve Cover Made Of High Quality Aluminum Alloy, Strong And Durable, High Sealing, Waterproof And Dustproof, Rust And Wear Resistant, Protect Tire Valve From Dust, Rain And Snow. 100% Brand And High Quality, Durable Even In Extreme Weather..
Features
- Adequate Quantity : When you purchase our product you will receive 8 car valve covers, a sufficient number to meet your multi-purpose needs. Enough to last you for a certain period of time, but also to share with others or family members, as well as a good gift option.
- Durable Materials :Tire valve cover made of high quality aluminum alloy, strong and durable, high sealing, waterproof and dustproof, rust and wear resistant, protect tire valve from dust, rain and snow. 100% brand and high quality, durable even in extreme weather.
- Easy To Load And Unload : We have these tire valves with different shapes on the outside and threaded on the inside, easy to install, easy to grip and also easy to remove when you want to check the air pressure. The non-slip grip is easier to screw on or screw off and won't take much of your time or physical effort.
- Protection Accessories : The car valve cap has a rotating thread structure inside, which can be tightly fastened with the tire valve to prevent the valve from leaking and make a better seal. And to protect the valve core from corrosion due to direct contact with mud, water and snow, extending the service life of the tire.
- Highly Versatile : Tire valves are universally available for standard US valves, including cars, SUVs, trucks, RVs, bicycles, motorcycles and other motor vehicles, etc. They are suitable for use on most vehicles. If you have more than one type of vehicle in your home, this valve cap is a great convenience for daily use and replacement.
- See more on Amazon...
Brand: AICEL | Manufacturer: AICEL
Dimensions: 0.20 x 0.10 x 0.10 inches | Weight: 0.01 Pounds
Warranty: 0.2
See On Amazon #10
2PCS Exhaust Gasket,2" 3-Bolt Exhaust Flange Gasket,Multifunctional Manifold/Header/Muffler/Catalytic Converter Gasket,Graphite Exhaust Pipe Gasket for Car Exhaust Turbo (2 inch)
Asin: B0CRTMMH8M | Model: Exhaust Gasket | PartNumber: Exhaust Gasket
✨ Composite Material: Our Exhaust Gasket Is Made Of Premium Composite Material, The Middle Material Is Graphite Asbestos, Which Has Good High Temperature Resistance And Sealing; The Outer Layer Is Galvanized Sheet, Which Is Strong And Durable, And Is Not Easy To Rust. The Combination Of The Two Is What Makes Up This Essential Car Part..
✨ Wide Application: Our Multi-Functional Gasket Can Be Applied To Many Other Pipes In Addition To Replacing Exhaust Pipe Gaskets. It Can Also Be Graphite Asbestos Gasket/ Manifold Gasket/ Header Gasket/ Muffler Gasket/ Catalytic Converter Gasket. No Matter Where It Is Installed, It Works Well To Help Keep The Unit Functioning Properly..
✨ Easy Installation: Each Of Our Bags Comes With 2 Pieces Of The Same Size Gasket. This Gasket Has 3 Slotted Bolt Holes, Simply Place The Muffler Heat Tab On The Connector, Align The Piston Holes, Make Sure The Screw Holes And Bolt Holes Are Lined Up, Tighten The Nut To Make Sure The Gasket Is Securely Installed..
✨ Variety Of Sizes To Choose From: Our Catalytic Converter Gaskets Are Available In Five Sizes: 2" And 2.25" Gaskets Have The Same Bolt Spacing Of 2.95"/75 Mm, 2.5" Gaskets Have A Bolt Spacing Of 3.5"/89 Mm, 3" Gaskets Have A Bolt Spacing Of 4"/103 Mm, And 3.5" Gaskets Have A Bolt Spacing Of 4.1"/105 Mm..
Features
- PROTECTING THE ENGINE: The main function of this manifold gasket is to seal and insulate the car, which makes it an important car accessory to protect the car's engine. Therefore if this gasket is broken, the car will experience a significant increase in noise, while there will be a lot of smoke and unpleasant smell in the engine compartment.
- VARIETY OF SIZES TO CHOOSE FROM: Our catalytic converter gaskets are available in five sizes: 2 and 2.25 gaskets have the same bolt spacing of 2.95/75 mm, 2.5 gaskets have a bolt spacing of 3.5/89 mm, 3 gaskets have a bolt spacing of 4/103 mm, and 3.5 gaskets have a bolt spacing of 4.1/105 mm.
- COMPOSITE MATERIAL: Our exhaust gasket is made of premium composite material, the middle material is graphite asbestos, which has good high temperature resistance and sealing; the outer layer is galvanized sheet, which is strong and durable, and is not easy to rust. The combination of the two is what makes up this essential car part.
- EASY INSTALLATION: Each of our bags comes with 2 pieces of the same size gasket. This gasket has 3 slotted bolt holes, simply place the muffler heat tab on the connector, align the piston holes, make sure the screw holes and bolt holes are lined up, tighten the nut to make sure the gasket is securely installed.
- WIDE APPLICATION: Our multi-functional gasket can be applied to many other pipes in addition to replacing exhaust pipe gaskets. It can also be graphite asbestos gasket/ manifold gasket/ header gasket/ muffler gasket/ catalytic converter gasket. No matter where it is installed, it works well to help keep the unit functioning properly.
- See more on Amazon...
Brand: Salior | Manufacturer: Salior
Dimensions: 0.07 x 3.62 x 3.62 inches
Warranty: Warranty Within 3 Months
See On Amazon #11
Nilight 12 Inch 300W LED Light Bar Triple Row Flood Spot Combo, Aluminum Housing, IP67 Waterproof, 30000LM, 2 Years Warranty
Asin: B09P3WR5R2 | Model: ZH433 | PartNumber: ZH433 | Ean: 0812227035747 | UPC: 812227035747
Sturdy Bracket: Can Be Used On Tubes Of 1", 1-1/2", 1-3/4" & 2" In Diameter And Applied To Led Light Bars For Almost All Kinds Of Vehicles. Simplifies The Installation Of Nilight Off-Road Led Light Bars Onto The Roof Rack, Roll Cages Bull Bar, Or Head Rack Of Your Atv, Utv, And Trucks.
Package Includes: 12 Inch Led Light Bar, Horizontal Bar Clamp Mounting Mount Bracket, Wiring Harness,2 Years Warranty Honored By Nilight.
Wiring Harness:More Than 10Ft Of Wiring From The Switch To Lights, Has Also Been Extendable, Run The Harness To Your Desired Lighting Location.
High Performance:Ip67 Waterproof Rate, Efficient Cooling, Die-Cast Aluminum Alloy Housing, Over 30, 000 Hours Lifespan.
Features
- Super brightness:Combo beam with triple row and nest reflector cup design in the middle for extreme light efficiency,the broad reflective plate on both sides allows multi-angle refraction, ideal for ambient illumination
- High performance:IP67 waterproof rate, efficient cooling, die-cast aluminum alloy housing, over 30, 000 hours lifespan
- Sturdy bracket: Can be used on tubes of 1, 1-1/2, 1-3/4 & 2 In diameter and applied to LED light bars for almost all kinds of vehicles. Simplifies the installation of Nilight off-road LED light bars onto the roof rack, roll cages bull bar, or head rack of your ATV, UTV, and trucks
- Wiring harness:more than 10ft of wiring from the switch to lights, has also been extendable, run the harness to your desired lighting location
- Package Includes: 12 Inch LED light bar, Horizontal Bar Clamp Mounting Mount Bracket, Wiring Harness,2 Years Warranty Honored by Nilight
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Dimensions: 12.00 x 3.00 x 3.00 inches | Weight: 4.75 Pounds
Warranty: 2 years warranty.
See On Amazon #12
Nilight 20Inch 420W Triple Row Flood Spot Combo LED Light Bar 42000LM for Driving Boat Off Road - Horizontal Clamp Mount and 16AWG Wiring Kit, 2 Year Warranty
Asin: B09P3W588M | Model: ZH434 | PartNumber: ZH434 | Ean: 0812227035754 | UPC: 812227035754
Sturdy Bracket: Can Be Used On Tubes Of 1", 1-1/2", 1-3/4" & 2" In Diameter And Applied To Led Light Bars For Almost All Kinds Of Vehicles. Simplifies The Installation Of Nilight Off-Road Led Light Bars Onto The Roof Rack, Roll Cages Bull Bar, Or Head Rack Of Your Atv, Utv, And Truck.
Package Includes: 20 Inch Led Light Bar, Horizontal Bar Clamp Mounting Bracket, 16Awg Wiring Harness,2 Years Warranty Honored By Nilight.
Wiring Harness: More Than 10Ft Of Wiring From The Switch To Lights, Has Also Been Extendable, Run The Harness To Your Desired Lighting Location,3 Pin On/Off Rocker Switch With Red Indicator Light When Truing On, Easy To Turn On Or Off, Long Service Life.
Upgrading Reflector Cup: The Broad Reflective Plate On Both Sides Allows Multi-Angle Refraction, Ideal For Ambient Illumination.
Features
- Super brightness: Combo beam with triple row and nest reflector cup design in the middle for extreme light efficiency
- Upgrading reflector cup: The broad reflective plate on both sides allows multi-angle refraction, ideal for ambient illumination
- Sturdy bracket: Can be used on tubes of 1, 1-1/2, 1-3/4 & 2 In diameter and applied to LED light bars for almost all kinds of vehicles. Simplifies the installation of Nilight off-road LED light bars onto the roof rack, roll cages bull bar, or head rack of your ATV, UTV, and truck
- Wiring Harness: more than 10ft of wiring from the switch to lights, has also been extendable, run the harness to your desired lighting location,3 pin on/off rocker switch with Red Indicator light when truing on, easy to turn on or off, long service life
- Package Includes: 20 Inch LED light bar, Horizontal Bar Clamp Mounting Bracket, 16AWG Wiring Harness,2 Years Warranty Honored by Nilight
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Dimensions: 4.00 x 21.00 x 7.50 inches | Weight: 5.75 Pounds
Warranty: 2 years warranty.
See On Amazon #13
AUCELI Car Window Seal Strip, Windshield Weather Strip for Car, Automotive Waterproof Soundproof V-Shape Self Adhesive Trim Cover, Universal Vehicle Rubber Weatherstrip Draft Seal Strip
Asin: B0BZCSJ2HK | Model: Seal Strip | PartNumber: Seal Strip
【Perfect Fit】: This Universal Window Seal Has A V-Shaped Design And Fits Perfectly To The Original Window Design. It Has Many Advantages, Has A Variety Of Practical Functions, Is Invisible And Beautiful After Use, Does Not Affect The Glass Lift, The Seal Is Odourless And Has Excellent Noise, Wind And Dust Protection..
【Wide Range Of Uses】: These Car Seals Have A Wide Range Of Uses And Are Well Suited To Most Models On The Market, Including Cars, Trucks, Suvs And Various Other Vehicles, And Are Mainly Used In Car Window Positions, Not Only To Protect Your Car Windows But Also To Insulate Them From Outside Noise, And Of Course You Can Use Them In Any Size That Suits..
【Easy To Install】: Clean The Car Window First, Apply The Adhesive Aid Evenly, Peel Off A Small Part Of The Red Plastic Film And Install It Inwards, Gradually Step In And Smooth It Out, Cut Off The Excess With Scissors, Peel Off The Red Adhesive Backing Film And Press It Inwards One By One To Make The Adhesive Backing Sticky..
【Solid Use】: These Car Window Seals Are Odourless, Safe And Non-Toxic, Strong And Durable, When Using It You Don't Have To Worry About Unintentionally Crushing It Or Bending It To Cause Breakage, The Car Window Gap Special Card Strip Seal Is Silent And Dustproof, It Can Be Firmly Fixed In The Groove Of The Car Window, Anti-Aging And Long Life..
Features
- Premium Quality : This V-seal for car windows is made of high quality rubber material. The environmentally friendly rubber material has good elasticity and toughness, strong flexibility, resistance to pulling, not easy to break, it has excellent characteristics such as high temperature resistance, ageing resistance, corrosion resistance.
- Solid Use : These car window seals are odourless, safe and non-toxic, strong and durable, when using it you don't have to worry about unintentionally crushing it or bending it to cause breakage, the car window gap special card strip seal is silent and dustproof, it can be firmly fixed in the groove of the car window, anti-aging and long life.
- Perfect Fit : This universal window seal has a V-shaped design and fits perfectly to the original window design. It has many advantages, has a variety of practical functions, is invisible and beautiful after use, does not affect the glass lift, the seal is odourless and has excellent noise, wind and dust protection.
- Easy to Install : Clean the car window first, apply the adhesive aid evenly, peel off a small part of the red plastic film and install it inwards, gradually step in and smooth it out, cut off the excess with scissors, peel off the red adhesive backing film and press it inwards one by one to make the adhesive backing sticky.
- Wide Range of Uses : These car seals have a wide range of uses and are well suited to most models on the market, including cars, trucks, SUVs and various other vehicles, and are mainly used in car window positions, not only to protect your car windows but also to insulate them from outside noise, and of course you can use them in any size that suits.
- See more on Amazon...
Brand: AUCELI | Manufacturer: AUCELI
Dimensions: 0.20 x 3.10 x 2.10 inches | Weight: 0.04 pounds
Warranty: 0.2
See On Amazon #14
Suvnie 2 PCS Car Exhaust Gasket, 2'' 2-Bolt Exhaust Flange Gasket, High Temp Standard Exhaust Manifold Gasket Replacement for Turbo Catback Headers, Exhaust Pipe Car Accessories
Asin: B0CR763KKM | Model: 2 Inch | PartNumber: 2 Inch
【Premium Material】: This Car Exhaust Gasket Is Made Of High-Quality Stainless Steel Material With Graphite Asbestos In The Center, Which Is Sturdy And Wear-Resistant. It Is Resistant To High Temperatures And Pressures, Which Can Be Well Adapted To A Wide Range Of Weather Conditions. It Is Rustproof And Durable, Which Will Last For A Long Time..
【Wide Application】: It Is Suitable For Most Exhaust Sealing Applications, Which Is Widely Used For Piping Connection Of Exhaust, Turbocharger, Muffler, Manifold And Other Equipments. Please Carefully Check If The Gasket Fits Your Car Before Purchasing..
【Easy To Install】: It Has A Simple Design And Is Quick For Installation. You Just Need To Place The Gasket On The Connector And Align The Piston Holes, Making Sure The Screw Holes Line Up With The Exhaust Pipe Threaded Holes. Then Tighten The Nut With The Bolt, Making Sure The Gasket Is Firm..
【Package Contents】: You Will Receive 2 Pieces Of Car Exhaust Gaskets. There Are 3 Different Inner Diameters, 2 Inches (50.8Mm), 2.5 Inches (64Mm) And 3 Inches (76Mm). The Ranges Of Distance Between The Two Holes For The 3 Styles Are 2.76 To 3.86 Inches, 3.27 To 5.12 Inches And 3.66 To 4.84 Inches. You Can Choose The Proper Size According To Your Car Exhaust..
Features
- Improved Performance : The exhaust gasket extends the service time of your engine's cylinder head. It has excellent sealing properties and provides a tight seal for your exhaust components, ensuring that exhaust gases do not leak. It also helps reduce engine noise and improve fuel efficiency, thus keeping your engine working efficiently.
- Package Contents : You will receive 2 pieces of car exhaust gaskets. There are 3 different inner diameters, 2 inches (50.8MM), 2.5 inches (64MM) and 3 inches (76MM). The ranges of distance between the two holes for the 3 styles are 2.76 to 3.86 inches, 3.27 to 5.12 inches and 3.66 to 4.84 inches. You can choose the proper size according to your car exhaust.
- Premium Material : This car exhaust gasket is made of high-quality stainless steel material with graphite asbestos in the center, which is sturdy and wear-resistant. It is resistant to high temperatures and pressures, which can be well adapted to a wide range of weather conditions. It is rustproof and durable, which will last for a long time.
- Easy to Install : It has a simple design and is quick for installation. You just need to place the gasket on the connector and align the piston holes, making sure the screw holes line up with the exhaust pipe threaded holes. Then tighten the nut with the bolt, making sure the gasket is firm.
- Wide Application : It is suitable for most exhaust sealing applications, which is widely used for piping connection of exhaust, turbocharger, muffler, manifold and other equipments. Please carefully check if the gasket fits your car before purchasing.
- See more on Amazon...
Brand: Suvnie | Manufacturer: Suvnie
See On Amazon #15
TRIMAX T-3BLACK Premium 5/8" Key Receiver Lock Rugged Black epoxy Powder Coat
Asin: B000W0RQ8C | Model: T-3BLACK | PartNumber: T-3BLACK | Ean: 7262318290693, 0797824100565 | UPC: 797824100565
Patented ¼ Turn Design Prevents False Locking, Won't Pop Open..
Backed By Trimax's Limited Lifetime Warranty.
Tested Specifications Exceed 32,000 Lbs..
Comes With 2 Keys.
Patented Design Incorporates Internal O-Ring And Water Tight Cap To Help Seal Out Dirt.
5/8" Diameter Pin With 2-3/4" Span, (Fits 2" Receivers).
Features
- Machined from 100% Forged Steel with Rugged Black Epoxy Powder Coat Finish
- 5/8 Diameter Pin with 2-3/4 Span, (Fits 2 Receivers)
- Patented turn design prevents False Locking, Won't POP Open.
- Patented design incorporates internal O-Ring and Water Tight Cap to help Seal Out Dirt
- Tested Specifications Exceed 32,000 LBS.
- Comes with 2 Keys
- Backed by Trimax's Limited Lifetime Warranty
- See more on Amazon...
First Available: 09/14/2007
Brand: Trimax | Manufacturer: Trimax Locks - Wyers Products
Dimensions: 8.80 x 1.20 x 5.80 inches | Weight: 0.90 pounds
Warranty: Lifetime Warranty
See On Amazon #16
Yumfugu Pack-1 American Flag Trailer Hitch Cover, 2" Trailer Hitch Cover Tube Plug Insert, Car Square Mouth Receiver Dustproof Rubber Plug, Universal Exterior Protective Cover for Most Cars (Black)
Asin: B0CRKTNDSN | Model: YUMYG1201BL-1PC-1 | PartNumber: YUMYG1201BL-1PC-1 | Ean: 0727903994754 | UPC: 727903994754
Product Details: The Package Includes 1 X Black American Flag Dust Plug, The Size Of The Insertion Port Is 2 Inches X 2 Inches. It Is Recommended That You Check The Tow Hitch Size And Shape To Ensure Proper Fit Before Ordering..
Widely Used: The Car Trailer Cover Fits All 2In X 2In Receiver Tubes. The Edge Of The Car Trailer Cover Is Designed With Grooves, Which Can Increase The Friction Between The Car Trailer Cover And The Car Trailer Tube. Provides Better Protection For Trailer Tubes And Trailer Base..
Easy Installation: The Trailer Hitch Is Covered With A Rubber Strap That Attaches To The Trailer Tube To Keep It From Getting Lost During The Car Wash. When Installing, Just Insert It And Press It Firmly. The Car Trailer Cover Can Be Directly Put On The Trailer Hitch..
Function: This Trailer Hook Cover Can Prevent External Rain, Dust, Sediment And Other Small Debris From Entering, Keep The Trailer Opening Clean, Extend Its Service Life And Prevent Rust. This Trailer Cover Keeps The Trailer Hitch Receiver Tube Clean And Protected When Not Towing..
Features
- High-quality Material: The tow hitch insert plug is made of premium material, wear-resistant and durable, good sun protection and waterproof performance, provides an excellent seal, not easy to break, you can use it with confidence.
- Function: This trailer hook cover can prevent external rain, dust, sediment and other small debris from entering, keep the trailer opening clean, extend its service life and prevent rust. This trailer cover keeps the trailer hitch receiver tube clean and protected when not towing.
- Product Details: The package includes 1 x black American flag dust plug, the size of the insertion port is 2 inches x 2 inches. It is recommended that you check the tow hitch size and shape to ensure proper fit before ordering.
- Easy Installation: The trailer hitch is covered with a rubber strap that attaches to the trailer tube to keep it from getting lost during the car wash. When installing, just insert it and press it firmly. The car trailer cover can be directly put on the trailer hitch.
- Widely Used: The car trailer cover fits all 2In x 2In receiver tubes. The edge of the car trailer cover is designed with grooves, which can increase the friction between the car trailer cover and the car trailer tube. Provides better protection for trailer tubes and trailer base.
- See more on Amazon...
Brand: Yumfugu | Manufacturer: Yumfugu
Warranty: Manufacturer warranty for 30 days from date of purchase.
See On Amazon #17
BESULEN 2.5 Inch Exhaust Clamp, 2 PCS Butt Joint Band Clamp Sleeve Coupler, Car Stainless Steel Muffler Band Clamp, Exhaust Pipes Repair Sleeve Connector, Car Exterior Accessories (2.5")
Asin: B0C3C5RT65 | Model: Exhaust Clamp | PartNumber: Exhaust Clamp
【Application Scope】: We Provide Three Diameter Sizes Of Exhaust Pipe Clamp For You To Choose, Which Are 2 Inch, 2.25 Inch And 2.5 Inch. They Can Be Widely Used For Car Exhaust Pipes, Mufflers, Drop Pipes, Collector Pipes, Manifolds, Etc. You Can Buy According To Your Need..
【Uniform Clamping Force】: The Unique Seal And High Clamping Load Provides, Evenly Distributes The Clamping Force Throughout 360° Without Distorting Your Exhaust Components To Prevent Leaks And Control Material Deformation. This Is A Very Practical Exhaust System Docking Clamp..
【Function】: The Exhaust Pipe Clamp Comes With An L-Shaped Block That Creates A Complete "Inner Circle Seal" When Clamping, Which Can Create A Better Seal And Help Prevent Exhaust Gas And Noise Leakage. Besides, You Can Also Use It For Repairing Exhaust Pipes..
【Easy Installation】: No Welding Design Makes Installation And Disassembly Easier And Less Time Consuming. Just Unscrew The Bolt, Open The Exhaust Pipe Clamp, Then Install It On The Car's Exhaust Pipe, After Adjusting It To The Required Installation Position, Tighten The Nut To Ensure A Tight And Firm Fixation..
Features
- Stainless Steel : This exhaust pipe clamp is made of 304 stainless steel material, aluminum alloy L-block, zinc-plated flange bolts and nuts, steel gasket. Stainless steel material is not easy to rust, can withstand long-term sun and rain, excellent performance and very durable.
- Easy Installation : No welding design makes installation and disassembly easier and less time consuming. Just unscrew the bolt, open the exhaust pipe clamp, then install it on the car's exhaust pipe, after adjusting it to the required installation position, tighten the nut to ensure a tight and firm fixation.
- Application Scope : We provide three diameter sizes of exhaust pipe clamp for you to choose, which are 2 inch, 2.25 inch and 2.5 inch. They can be widely used for car exhaust pipes, mufflers, drop pipes, collector pipes, manifolds, etc. You can buy according to your need.
- Function : The exhaust pipe clamp comes with an L-shaped block that creates a complete inner circle seal when clamping, which can create a better seal and help prevent exhaust gas and noise leakage. Besides, you can also use it for repairing exhaust pipes.
- Uniform Clamping Force : The unique seal and high clamping load provides, evenly distributes the clamping force throughout 360 without distorting your exhaust components to prevent leaks and control material deformation. This is a very practical exhaust system docking clamp.
- See more on Amazon...
Brand: BESULEN | Manufacturer: BESULEN
Dimensions: 1.00 x 0.80 x 0.80 inches | Weight: 0.03 pounds
Warranty: 0.2
See On Amazon #18
Sinytuto Pack-1 Trailer Hitch Cover, 2 Inches x 2 Inches Receiver Tube Hitch Plug, Automobile Modification Accessories, Compatible with 2002-2013 4 Runner-up, 2003-2015 Dodge Ram 2500 (Black)
Asin: B0CQS3X3KK | Model: SINBHG519-1PC | PartNumber: SINBHG519-1PC
Product Information: You Will Receive 1 Pc Trailer Hitch Cover From The Package. Inner Size: 2 Inches X 2 Inches. It Has Exquisite Appearance And Excellent Performance, Which Is A Pretty Good Car Accessory. It Is Applicable To The Pt228-35960-Hp Receiver Hook Plug, 2003-2015 Dodge Ram 2500 And 2002-2013 4 Runner-Up..
Unique Design: The Use Of A Protective Cover Reduces The Exposure Of The Receiver Tube, Reducing The Possibility Of Accidental Bumps, And It Has A Bracket That Is Permanently Mounted On The Receiver Tube To Prevent The Cover From Being Misplaced When Not In Use..
Easy To Use: You Can Easily And Quickly Finish The Installation, Even If You Have No Relevant Experience. Just Push It Into The Hook Tube, And No Additional Tools Are Required. The Whole Installation Process Will Be Taken In Few Minutes, Which Is Super Convenient..
Practical Function: This Protective Cover Has Good Sealing Performance, Which Can Effectively Prevent Dust, Mud And Moisture From Entering The Trailer Receiving Tube, Providing Effective Dust-Proof And Waterproof Protection, Ensuring The Normal Operation Of The Trailer Receiving Tube..
Features
- Durable Material: This product is made of high-quality material, which is sturdy, durable and not easy to break or deform. It can still maintain its integrity and performance under conditions such as friction, abrasion, and impact, providing effective protection for the receiving tube.
- Practical Function: This protective cover has good sealing performance, which can effectively prevent dust, mud and moisture from entering the trailer receiving tube, providing effective dust-proof and waterproof protection, ensuring the normal operation of the trailer receiving tube.
- Product Information: You will receive 1 pc trailer hitch cover from the package. Inner size: 2 inches x 2 inches. It has exquisite appearance and excellent performance, which is a pretty good car accessory. It is applicable to the PT228-35960-HP receiver hook plug, 2003-2015 Dodge ram 2500 and 2002-2013 4 runner-up.
- Easy to Use: You can easily and quickly finish the installation, even if you have no relevant experience. Just push it into the hook tube, and no additional tools are required. The whole installation process will be taken in few minutes, which is super convenient.
- Unique Design: The use of a protective cover reduces the exposure of the receiver tube, reducing the possibility of accidental bumps, and it has a bracket that is permanently mounted on the receiver tube to prevent the cover from being misplaced when not in use.
- See more on Amazon...
Brand: Sinytuto | Manufacturer: Sinytuto
Warranty: Manufacturer warranty for 30 days from date of purchase
See On Amazon #19
cerfioo 1 PC Trailer Hitch Cover, 2" American Flag Square Receiver Dustproof Rubber Plug, Trailer Hitch Cover Tube Plug Insert, Universal Exterior Protective Cover, Suitable for Most Cars (Black)
Asin: B0CQ8G59S4 | Model: CERYG1201BL-1PC | PartNumber: CERYG1201BL-1PC
Function: This Trailer Hitch Cover Can Avoid External Rainwater, Dust, Sediment And Other Small Debris From Entering, Keep The Trailer Opening Clean, Extend Its Service Life And Avoid Rust. Provides Better Protection For Trailer Tubes And Trailer Base..
Product Details: Package Includes 1 Black American Flag Dust Plug, Product Front Cover Measures 3.1" X 3", Insertion Port Measures 2" X 1.6". It Is Recommended That You Check The Size And Shape Of The Tow Hook Before Ordering To Ensure Proper Installation..
Wide Compatible: This Trailer Hitch Plug Fits Most 2-Inch Square Trailer Opening Sizes And Is Suitable For Class Iii 3, Iv 4, And V 5. To Install, Just Insert And Press Firmly. You Can Buy With Confidence..
Excellent Design: This Product Has A Hitch Strap On The Outside That Can Be Fixed To The Trailer Tube To Reduce It From Being Lost During The Car Wash. At The Same Time, There Is A Protruding Card Slot Design Around The Dust Plug, Which Can Be Firmly Inserted Into The Receiver Mouth To Avoid Loss..
Features
- Premium Quality: This trailer hitch insert plug is made of TPU material, which is wear-resistant and durable, has good sun protection and waterproof properties, provides excellent sealing and is not easy to break, you can use it with confidence. The American flag pattern on the surface is exquisite and unique and will not fade easily, enhancing the car's patriotic and fashionable appearance.
- Excellent Design: This product has a hitch strap on the outside that can be fixed to the trailer tube to reduce it from being lost during the car wash. At the same time, there is a protruding card slot design around the dust plug, which can be firmly inserted into the receiver mouth to avoid loss.
- Function: This trailer hitch cover can avoid external rainwater, dust, sediment and other small debris from entering, keep the trailer opening clean, extend its service life and avoid rust. Provides better protection for trailer tubes and trailer base.
- Wide Compatible: This trailer hitch plug fits most 2-inch square trailer opening sizes and is suitable for Class III 3, IV 4, and V 5. To install, just insert and press firmly. You can buy with confidence.
- Product Details: Package includes 1 black American flag dust plug, product front cover measures 3.1 x 3, insertion port measures 2 x 1.6. It is recommended that you check the size and shape of the tow hook before ordering to ensure proper installation.
- See more on Amazon...
Brand: cerfioo | Manufacturer: cerfioo
Warranty: Manufacturer warranty for 30 days from date of purchase
See On Amazon
Looking For Something Else?
Search