uxcell 10-24 UNC Tap and Die Set with 20mm Round Die Stock Handle Wrench, High Speed Steel Machine Thread Tap and Round Die Threading Tool
Asin: B091CX2GJJ | Model: a20112100ux0003 | PartNumber: a20112100ux0003
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Special Design: High-Speed Steel Machine Tap Is With High Hardness And Toughness For Wear Resistance. Features Just The Base Substrate Without Any Additional Coatings. With Adjustable Screws, The Die Stock Can Securely Hold Round Dies.
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping Threads..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened..
Application: Can Re-Thread Existing Threads In Hard Materials Like Metal, Or Make New Threads In Soft Material Like Plastic. Used To Process Mild Steel, Aluminum, Stainless Steel, Iron, Cast Iron, Alloy Steel, And Hard Plastics, Etc..
Features
- Tap and Die Set: 10-24 UNC thread tap and round die. 20mm die stock fits 11mm-20mm / M3-M4 capacity, with adjustable screws. Suitable for making or repairing male and female threads. Good for general purpose applications.
- Application: Can re-thread existing threads in hard materials like metal, or make new threads in soft material like plastic. Used to process mild steel, aluminum, stainless steel, iron, cast iron, alloy steel, and hard plastics, etc.
- Special Design: High-speed steel machine tap is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings. With adjustable screws, the die stock can securely hold round dies
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping threads.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon Similar To uxcell 1024 UNC Tap and
#1
uxcell 10pcs Machine Thread Taps 8-32 UNC 2B High Speed Steel 6542 Straight Flute Screw Thread Milling Taps Threading Tapping Repair Tools
Asin: B0CP44RH49
Wide Applications: Thread Taps Create New Threads Or Re-Thread Damaged Or Jammed Threads. Widely Used For Most Metals, Iron Plate, Copper, Zinc, Alloy Steel, Abrasive Steel, A3 Steel, Stainless Steel. Add Proper Tapping Oil For Higher Quality Threads And More Durable Taps..
Tips: Machine Taps Are Used With Tapping, Drilling, Automatic Or Milling Machines. Drill The Holes With A Twist Drill Bit First, Then Tap With A Thread Tap. The Tapping Angle Should Be 90 Degrees Vertical And Stable. Not Recommended For Hand And Electric Drill Tapping..
6542 High-Speed Steel Taps: Offer High Hardness, Good Toughness, Wear Resistance, And Excellent Cutting Performance. Uncoated Taps Feature Just The Base Substrate Without Any Additional Coatings, Great For A Wide Range Of Applications..
Straight Flute Tap: Straight Flute Tap, Clear Threads Without Burrs, Right Hand Tapping Direction. Provides Rapid Downward Chip Removal To Achieve Efficient Thread Cutting, Suitable For Processing Through Holes Or Shallow Holes..
Features
- Thread Tap Size: Thread size: 8-32 UNC; accuracy: 2B; square shank width: 3.5mm / 0.14"; thread length: 20mm / 0.79"; total length: 59mm / 2.32".
- Straight Flute Tap: Straight flute tap, clear threads without burrs, right hand tapping direction. Provides rapid downward chip removal to achieve efficient thread cutting, suitable for processing through holes or shallow holes.
- Wide Applications: Thread taps create new threads or re-thread damaged or jammed threads. Widely used for most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel. Add proper tapping oil for higher quality threads and more durable taps.
- 6542 High-Speed Steel Taps: Offer high hardness, good toughness, wear resistance, and excellent cutting performance. Uncoated taps feature just the base substrate without any additional coatings, great for a wide range of applications.
- Tips: Machine taps are used with tapping, drilling, automatic or milling machines. Drill the holes with a twist drill bit first, then tap with a thread tap. The tapping angle should be 90 degrees vertical and stable. NOT recommended for hand and electric drill tapping.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #2
uxcell Adjustable Tap Wrench Handle, for Metric M3-M12 W1/8-1/2 Taps, Thread Tap Holder Reamer Hand Tapping Tool for Machinist Repair, Medium Carbon Steel Handle with Nickel Plated, 2pcs
Asin: B07SXJQDLP | Model: a19041000ux0362 | PartNumber: a19041000ux0362
Features: Tap Wrench Has 1 Rigid Handle And 1 Adjustable Handle That Adjusts The Jaws To Clamp Tools Easily And Firmly. Straight Tap Wrench Provides Great Leverage, And Is Specially Designed For Larger-Diameter Taps.
Tips: The Force Of Both Hands Must Be Even When Operating The Tap Wrench. The Wrench And The Tap Should Form An Angle Of 90 Degrees, And The Tap And The Threaded Bottom Hole Are Perpendicular To Each Other.
Easy To Use: Operates With Both Hands To Rotate The Tap Wrench In A Certain Direction To Process, Repair And Clean The Internal Thread.
Applications: Hand Tap Holder Can Clamp Various Taps For Tapping Operations. It Also Can Be Used With Drills, Reamers, Screw Extractors And Other Small Tools That Need To Be Rotated Manually.
Features
- Tap Wrench: Fit tap size: M3-M12 (Mertic)/ 1/8" - 1/2"(UNC/UNF) / 2.5mm-12mm, medium carbon steel handle with nickel plated, zinc alloy chuck with electrostatic spraying, offering high hardness and wear resistance for long service life
- Applications: Hand tap holder can clamp various taps for tapping operations. It also can be used with drills, reamers, screw extractors and other small tools that need to be rotated manually
- Features: Tap wrench has 1 rigid handle and 1 adjustable handle that adjusts the jaws to clamp tools easily and firmly. Straight tap wrench provides great leverage, and is specially designed for larger-diameter taps
- Easy To Use: Operates with both hands to rotate the tap wrench in a certain direction to process, repair and clean the internal thread
- Tips: The force of both hands must be even when operating the tap wrench. The wrench and the tap should form an angle of 90 degrees, and the tap and the threaded bottom hole are perpendicular to each other
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #3
uxcell 2 Pairs Metric Hand Tap Set, M7 x 0.75 Taper/Bottom Thread Taps Alloy Tool Steel Screw Tap Kit Hand Threading Tapping Tools for Repair
Asin: B0CPLVPP6L
Wide Applications: The Hand Tap Set Is Used To Re-Thread Damaged Or Jammed Threads, Or To Create New Threads. Suitable For Tapping Through Or Shallow Holes In Mild Steels, Aluminum, Iron, Copper, Hard Plastic..
Tips: Ensure Proper Alignment, Use Proper Tapping Technique, And Apply Consistent Pressure As You Turn The Tap To Achieve Clean, Precise Threads. Periodically Reverse While Tapping To Break Up Chips And Remove Debris From The Flutes, Preventing Clogging And Ensuring Smooth Operation..
Hand Threading Taps: The Tap Set Is Mainly For Hand Use, And Is Used With A Tap Wrench. Apply Appropriate Cutting Lubricant Or Oil During The Tapping Process For Higher Quality Threads And More Durable Screw Taps..
Tap Set: Taper Tap: Start The Thread And Guide It Into The Workpiece, Commonly Used When Tapping Through Holes. Bottom Tap: Generate Threads Close To The Bottom Of A Blind Hole. Straight Flute Tap Provides Fast Downward Chip Removal, And Clear Threads Without Burrs..
Features
- Metric Hand Taps: Thread Size: M7 x 0.75; Square Shank Width: 5mm / 0.2"; Thread Length: 20mm / 0.79"; Total Length: 62mm / 2.44"; Accuracy: H2; Number of Flutes: 3 Straight Flutes; Tapping Direction: Right Hand
- Tap Set: Taper Tap: Start the thread and guide it into the workpiece, commonly used when tapping through holes. Bottom Tap: Generate threads close to the bottom of a blind hole. Straight flute tap provides fast downward chip removal, and clear threads without burrs.
- Wide Applications: The hand tap set is used to re-thread damaged or jammed threads, or to create new threads. Suitable for tapping through or shallow holes in mild steels, aluminum, iron, copper, hard plastic.
- Hand Threading Taps: The tap set is mainly for hand use, and is used with a tap wrench. Apply appropriate cutting lubricant or oil during the tapping process for higher quality threads and more durable screw taps.
- Tips: Ensure proper alignment, use proper tapping technique, and apply consistent pressure as you turn the tap to achieve clean, precise threads. Periodically reverse while tapping to break up chips and remove debris from the flutes, preventing clogging and ensuring smooth operation.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #4
uxcell 1 Pair Metric Hand Tap Set, M7 x 0.75 Taper/Bottom Thread Taps Alloy Tool Steel Screw Tap Kit Hand Threading Tapping Tools for Repair
Asin: B0CPLWNWTZ
Wide Applications: The Hand Tap Set Is Used To Re-Thread Damaged Or Jammed Threads, Or To Create New Threads. Suitable For Tapping Through Or Shallow Holes In Mild Steels, Aluminum, Iron, Copper, Hard Plastic...
Tips: Ensure Proper Alignment, Use Proper Tapping Technique, And Apply Consistent Pressure As You Turn The Tap To Achieve Clean, Precise Threads. Periodically Reverse While Tapping To Break Up Chips And Remove Debris From The Flutes, Preventing Clogging And Ensuring Smooth Operation..
Hand Threading Taps: The Tap Set Is Mainly For Hand Use, And Is Used With A Tap Wrench. Apply Appropriate Cutting Lubricant Or Oil During The Tapping Process For Higher Quality Threads And More Durable Screw Taps..
Tap Set: Taper Tap: Start The Thread And Guide It Into The Workpiece, Commonly Used When Tapping Through Holes. Bottom Tap: Generate Threads Close To The Bottom Of A Blind Hole. Straight Flute Tap Provides Fast Downward Chip Removal, And Clear Threads Without Burrs..
Features
- Metric Hand Taps: Thread Size: M7 x 0.75; Square Shank Width: 5mm / 0.2"; Thread Length: 20mm / 0.79"; Total Length: 62mm / 2.44"; Accuracy: H2; Number of Flutes: 3 Straight Flutes; Tapping Direction: Right Hand
- Tap Set: Taper Tap: Start the thread and guide it into the workpiece, commonly used when tapping through holes. Bottom Tap: Generate threads close to the bottom of a blind hole. Straight flute tap provides fast downward chip removal, and clear threads without burrs.
- Wide Applications: The hand tap set is used to re-thread damaged or jammed threads, or to create new threads. Suitable for tapping through or shallow holes in mild steels, aluminum, iron, copper, hard plastic..
- Hand Threading Taps: The tap set is mainly for hand use, and is used with a tap wrench. Apply appropriate cutting lubricant or oil during the tapping process for higher quality threads and more durable screw taps.
- Tips: Ensure proper alignment, use proper tapping technique, and apply consistent pressure as you turn the tap to achieve clean, precise threads. Periodically reverse while tapping to break up chips and remove debris from the flutes, preventing clogging and ensuring smooth operation.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #5
uxcell Metric Hand Tap M10 Thread 1 Pitch 3 Straight Flutes H2 Alloy Tool Steel Bottom & Taper Screw Tap Set Tapping Tools for Repairing 1 Pair
Asin: B07WLM2Q9Z | Model: a19051000ux0734 | PartNumber: a19051000ux0734
Wide Applications: The Thread Tap Kit Is Used To Re-Thread Damaged Or Jammed Threads. Suitable For Tapping Through Or Shallow Holes In Mild Steels, Aluminum, Iron, Copper, Hard Plastic..
9Sicr Steel Taps: 9Sicr Steel Is A Commonly Used Low Alloy Tool Steel With High Hardening Capacity, High Wear Resistance And Low Speed Cutting. The Reddish-Brown Coating On The Tap Belongs To The Normal Processing Process, Not Rusting..
Hand Taps: Mainly For Hand Use, Used With Tap Wrenches. Straight Flute Tap Provides Fast Downward Chip Removal For Efficient Threading, Clear Threads Without Burrs, Universal Square Shank..
Tap Set: Taper Style: Starts The Thread Square With The Workpiece. Bottoming Tap: Generate Threads To The Bottom Of Holes. Add Appropriate Tapping Oil For Higher Quality Threads And More Durable Screw Taps..
Features
- Metric Taps: Thread Size: M10; Pitch: 1; Shank Side Width: 6.7mm / 0.26 inch; Thread Length: 23mm / 0.91 inch; Total Length: 58mm / 2.28 inch
- Tap Set: Taper Style: Starts the thread square with the workpiece. Bottoming Tap: Generate threads to the bottom of holes. Add appropriate tapping oil for higher quality threads and more durable screw taps.
- Wide Applications: The thread tap kit is used to re-thread damaged or jammed threads. Suitable for tapping through or shallow holes in mild steels, aluminum, iron, copper, hard plastic.
- Hand Taps: Mainly for hand use, used with tap wrenches. Straight flute tap provides fast downward chip removal for efficient threading, clear threads without burrs, universal square shank.
- 9SiCr Steel Taps: 9SiCr steel is a commonly used low alloy tool steel with high hardening capacity, high wear resistance and low speed cutting. The reddish-brown coating on the tap belongs to the normal processing process, not rusting.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #6
uxcell Metric Tap and Drill Bit Set, M12 x 1.75 Thread Tap & 10.3mm Black Oxide Twist Drill Bit, Straight Flute Tap Tapping Threading Repair Tool Kit
Asin: B0CSFG963J
Features: Black Oxide Coating On Drill Bits Improves Durability, Corrosion Resistance And Lubricity, And Helps Reduce Friction And Heat, Extending Tool Life. Twist Drill Bit Has Sharp Cutting Edges And Large Spiral Grooves, Which Provide Neat And Smooth Cuts And Facilitate The Export Of Metal Chips..
Tips: Drill Holes With A Twist Drill Bit First, Then Tap With A Thread Tap. Tapping And Drilling Angle Should Be 90 Degrees Vertical And Stable. The Higher The Hardness, The Slower The Speed. The Tapping Depth Should Not Exceed 1.5 Times The Diameter Of The Tap (For Example, The Diameter M5x0.8 Is About 5Mm, And The Depth Should Not Exceed 7.5Mm.).
Easy To Use: Machine Taps Are Used In Drill Presses, Tapping, Cnc And Milling Machines. Use With Appropriate Lubricant (Such As Cutting Fluid Or Oil) To Get Higher Quality Threads And More Durable Tap & Drill Bit. Not Recommended For Hand Use And Electric Drill Tapping..
Wide Applications: Create New Threads Or Re-Thread Damaged Or Jammed Threads. Thread Tap Can Process Through Holes Or Shallow Blind Holes, With Downward Chip Removal, Right-Hand Cutting, And Fast And Accurate Tapping. Suitable For Most Metals, Cast Iron, Aluminum, Stainless Steel, Aluminum Alloy, Bronze And Hard Plastics..
Features
- Metric Tap and Drill Bit Set: Tap thread size: M12 x 1.75; drill bit size: 10.3mm. 6542 (M2) high speed steel Metric Tap and Drill Bit Set offers excellent heat resistance and hardness for durability and longevity, and good cutting performance.
- Wide Applications: Create new threads or re-thread damaged or jammed threads. Thread tap can process through holes or shallow blind holes, with downward chip removal, right-hand cutting, and fast and accurate tapping. Suitable for most metals, cast iron, aluminum, stainless steel, aluminum alloy, bronze and hard plastics.
- Features: Black oxide coating on drill bits improves durability, corrosion resistance and lubricity, and helps reduce friction and heat, extending tool life. Twist drill bit has sharp cutting edges and large spiral grooves, which provide neat and smooth cuts and facilitate the export of metal chips.
- Easy to Use: Machine taps are used in drill presses, tapping, CNC and milling machines. Use with appropriate lubricant (such as cutting fluid or oil) to get higher quality threads and more durable tap & drill bit. Not recommended for hand use and electric drill tapping.
- Tips: Drill holes with a twist drill bit first, then tap with a thread tap. Tapping and drilling angle should be 90 degrees vertical and stable. The higher the hardness, the slower the speed. The tapping depth should not exceed 1.5 times the diameter of the tap (for example, the diameter M5x0.8 is about 5mm, and the depth should not exceed 7.5mm.)
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #7
uxcell 2pcs Tap and Die Set, 5/8-11 UNC Left Hand Thread Tap & Round Die, Tapping Threading Tool Tap & Die Kit for Nut Screw Bolt Thread Repair
Asin: B0CS5ZMRKY
Features: Tap & Die With Clear Threads Without Burrs, Left Hand Tapping Direction. Thread Die Designed With Conical Lock Hole, Strong Locking Force And No Loosening. Uncoated Tools Feature Just The Base Substrate, Great For A Wide Range Of Applications..
How To Use: Die Is Used With Die Stock Wrench (Not Included). The Fastening Screw In The Middle Of The Wrench Should Be Inserted Into The Slot Of The Die And Tightened .Machine Tap Is Used In Drill Presses, Tapping, Cnc And Milling Machines. Apply Appropriate Cutting Lubricant Or Oil For Higher Quality Threads And More Durable Tools..
Reliable Material: 6542 High-Speed Steel Taps Offer High Hardness, Good Toughness, Wear Resistance, And Excellent Cutting Performance. 9Sicr Alloy Tool Steel Die Provides Excellent Hardness, Toughness And Wear Resistance For Durability..
Widely Used: Accurately Cut, Repair Or Clean Threads. Straight Flute Tap Process Through Or Shallow Blind Holes And Remove Chips Downward. Die Is Suitable For Threads On Rods, Bolts, Screws, Pipes And Shafts, Or Just Remove Bolts And Threaded Rods. Great For Most Metals, Iron, Copper, Zinc, Alloy Steel, Abrasive Steel, Stainless Steel, Etc...
Features
- Tap and Die Set: Thread Size: 5/8-11 UNC (Left Hand); Tap Square Shank Width: 10mm / 0.39"; Tap Thread Length: 33mm / 1.3"; Tap Total Length: 101mm / 3.98"; Die Outside Diameter: 38mm / 1.5", Die Thickness: 14mm / 0.55"
- Widely Used: Accurately cut, repair or clean threads. Straight flute tap process through or shallow blind holes and remove chips downward. Die is suitable for threads on rods, bolts, screws, pipes and shafts, or just remove bolts and threaded rods. Great for most metals, iron, copper, zinc, alloy steel, abrasive steel, stainless steel, etc..
- Features: Tap & die with clear threads without burrs, left hand tapping direction. Thread die designed with conical lock hole, strong locking force and no loosening. Uncoated tools feature just the base substrate, great for a wide range of applications.
- Reliable Material: 6542 high-speed steel taps offer high hardness, good toughness, wear resistance, and excellent cutting performance. 9SiCr alloy tool steel die provides excellent hardness, toughness and wear resistance for durability.
- How to Use: Die is used with die stock wrench (not included). The fastening screw in the middle of the wrench should be inserted into the slot of the die and tightened .Machine tap is used in drill presses, tapping, CNC and milling machines. Apply appropriate cutting lubricant or oil for higher quality threads and more durable tools.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #8
uxcell Combination Drill and Tap Bit Set, 6-32 8-32 10-3210-24 12-24 1/4-20 High Speed Steel 4341 Spiral Flute Drilling Tapping Tool 1/4" Hex Shank 6pcs
Asin: B0B1V28KCG | Model: a22040200ux0923 | PartNumber: a22040200ux0923
Features: Self-Centering Point, Do Not Need Assistant Center Drilling Or Center Punching. Quick Change 1/4-Inch Hex Shank Can Be Used On Power Tools More Easily And Securely. A Tapered End On Hex Shank Can Prevent Excessive Tapping..
Tips: Use On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps. Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection..
Coating: Features Just The Base Substrate Without Any Coatings, Good For Most General Purpose Thread Tapping. High Speed Steel Tool Has High Hardness And Toughness, Wear Resistance And Heat Resistance..
Wide Applications: Suitable For Processing Blind Holes. Used For Tapping Aluminum, Die Steel, Stainless Steel, Bronze, Hard Plastics, Etc.. Recommended Feed Rate: General Steel: 6-15M/Min; Harder Steel: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
Features
- Combination Drill and Tap Bit: Thread size: 6-32 UNC, 8-32 UNC, 10-32 UNC, 10-24 UNC, 12-24 UNC, 1/4-20 UNC; hex shank size: 1/4". Combination drill and tap bit set can complete hole drilling, tapping, deburring and countersinking. One-step operation greatly saves processing steps and improves working efficiency.
- Wide Applications: Suitable for processing blind holes. Used for tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- Features: Self-centering point, do not need assistant center drilling or center punching. Quick change 1/4-inch hex shank can be used on power tools more easily and securely. A tapered end on hex shank can prevent excessive tapping.
- Coating: Features just the base substrate without any coatings, good for most general purpose thread tapping. High speed steel tool has high hardness and toughness, wear resistance and heat resistance.
- Tips: Use on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #9
uxcell Machine Tap #8-32 UNC Thread 2B Class 3 Flutes High Speed Steel Screw Threading Tap Tapping Tool 3pcs
Asin: B07VFSW84V | Model: a19050800ux0928 | PartNumber: a19050800ux0928
Wide Applications: The Thread Tap Is Suitable For Drilling Mild Steels, Aluminum, Iron, Copper, Stainless Steel, Hard Plastic, Processing Through Holes Or Shallow Holes. Add Appropriate Tapping Oil For Higher Quality Internal Threads And More Durable Taps..
Machine Taps: Used In Drilling Machines, Tapping Machines, Automatic Machines, Machining Centers, Cnc, Milling Machines, Not Recommended For Hand And Electric Drill Tapping. Recommended Feed Speed: Ordinary Steel: 6-15M/Min; Harder Steel Material: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
Straight Flute Tap: Straight 3 Flutes Are Ground To Provide Rapid Downward Chip Removal For Efficient Threading, Clear Threads Without Burrs, Right Hand Tapping Direction. Micro Taps Are Mainly Used In Clocks And Watches For Machining Holes In Wood And Soft Metals With Low Hardness..
High Speed Steel Tap: The Screw Tap Has High Wear Resistance, Fast Cutting Speed, High Strength And Hardness, And Long Service Life. With Uncoated Base Substrate Only, Suitable For General Purpose Tapping..
Features
- Thread Tap: Thread Size: #8-32 UNC; Class: 2B; Thread Length: 20mm / 0.8 inch; Shank Side Width: 3mm / 0.12 inch; Total Length: 54mm / 2.13 inch
- High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping.
- Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps.
- Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness.
- Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min; harder steel material: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #10
uxcell Adjustable Tap Wrench Handle, for Metric M5-M20 W7/32-3/4 Taps, Thread Tap Holder Reamer Hand Tapping Tool for Machinist Repair, Medium Carbon Steel Handle with Nickel Plated
Asin: B07SVC8B2L | Model: a19041000ux0360 | PartNumber: a19041000ux0360
Features: Tap Wrench Has 1 Rigid Handle And 1 Adjustable Handle That Adjusts The Jaws To Clamp Tools Easily And Firmly. Straight Tap Wrench Provides Great Leverage, And Is Specially Designed For Larger-Diameter Taps.
Tips: The Force Of Both Hands Must Be Even When Operating The Tap Wrench. The Wrench And The Tap Should Form An Angle Of 90 Degrees, And The Tap And The Threaded Bottom Hole Are Perpendicular To Each Other.
Easy To Use: Operates With Both Hands To Rotate The Tap Wrench In A Certain Direction To Process, Repair And Clean The Internal Thread.
Applications: Hand Tap Holder Can Clamp Various Taps For Tapping Operations. It Also Can Be Used With Drills, Reamers, Screw Extractors And Other Small Tools That Need To Be Rotated Manually.
Features
- Tap Wrench: Fit tap size: M5-M20 (Mertic) / 7/32"-3/4"(UNC/UNF) / 4mm-17mm, medium carbon steel handle with nickel plated, zinc alloy chuck with electrostatic spraying, offering high hardness and wear resistance for long service life
- Applications: Hand tap holder can clamp various taps for tapping operations. It also can be used with drills, reamers, screw extractors and other small tools that need to be rotated manually
- Features: Tap wrench has 1 rigid handle and 1 adjustable handle that adjusts the jaws to clamp tools easily and firmly. Straight tap wrench provides great leverage, and is specially designed for larger-diameter taps
- Easy To Use: Operates with both hands to rotate the tap wrench in a certain direction to process, repair and clean the internal thread
- Tips: The force of both hands must be even when operating the tap wrench. The wrench and the tap should form an angle of 90 degrees, and the tap and the threaded bottom hole are perpendicular to each other
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #11
uxcell Straight Flute Taps, M7 x 1 Metric Left Hand Titanium Coated M35 Cobalt High Speed Steel Machine Tapping Screw Thread Milling Tap Machinist Repair Threading Tool
Asin: B09YRRDZ92 | Model: a22032200ux0147 | PartNumber: a22032200ux0147
Titanium Coating: Titanium Coating Provides Excellent Corrosion Resistance, Greatly Improves Wear Resistance And Hardness, And Reduces The Coefficient Of Friction. M35 Cobalt High Speed Steel Tool Features High Hardness (Hrc65-66), High Red Hardness, High Wear Resistance, Good Toughness..
Tips: Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection. Hand Use Or Electric Drill Use Is Easy To Cause Breakage To The Tap, So It Is Not Recommended. Prone To Chipping Or Breaking Due To Speed Overload Or Non-Vertical Tapping..
Easy To Use: The Thread Tap Is Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps..
Wide Applications: Suitable For Processing Through Holes. Used For Drilling And Tapping Stainless Steel, Aluminum, Die Steel, Bronze, Hard Plastics, Etc.. Recommended Feed Rate: General Steel: 6-15M/Min; Harder Steel: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
Features
- Straight Flute Taps: Thread size: M7 x 1; thread length: 23mm / 0.91"; square end size: 4.5mm / 0.18"; cutting direction: left hand (reverse). Straight flute design, downward chip removal, clear threads, fast tapping with accuracy.
- Wide Applications: Suitable for processing through holes. Used for drilling and tapping stainless steel, aluminum, die steel, bronze, hard plastics, etc.. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- Titanium Coating: Titanium coating provides excellent corrosion resistance, greatly improves wear resistance and hardness, and reduces the coefficient of friction. M35 Cobalt high speed steel tool features high hardness (HRC65-66), high red hardness, high wear resistance, good toughness.
- Easy to Use: The thread tap is used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps.
- Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drill use is easy to cause breakage to the tap, so it is not recommended. Prone to chipping or breaking due to speed overload or non-vertical tapping.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #12
uxcell Metric Hand Tap M18 Thread 1.5 Pitch 4 Straight Flutes H2 Alloy Tool Steel Bottom & Taper Screw Tap Set Tapping Tools for Repairing 1 Pair
Asin: B0CPS5NY27
Wide Applications: The Thread Tap Kit Is Used To Re-Thread Damaged Or Jammed Threads. Suitable For Tapping Through Or Shallow Holes In Mild Steels, Aluminum, Iron, Copper, Hard Plastic..
9Sicr Steel Taps: 9Sicr Steel Is A Commonly Used Low Alloy Tool Steel With High Hardening Capacity, High Wear Resistance And Low Speed Cutting..
Hand Taps: Mainly For Hand Use, Used With Tap Wrenches. Straight Flute Tap Provides Fast Downward Chip Removal For Efficient Threading, Clear Threads Without Burrs, Universal Square Shank..
Tap Set: Taper Style: Starts The Thread Square With The Workpiece. Bottoming Tap: Generate Threads To The Bottom Of Holes. Add Appropriate Tapping Oil For Higher Quality Threads And More Durable Screw Taps..
Features
- Metric Taps: Thread Size: M18; Pitch: 1.5; Shank Side Width: 10.5mm / 0.41 inch; Thread Length: 36mm / 1.42 inch; Total Length: 80mm / 3.15 inch
- Tap Set: Taper Style: Starts the thread square with the workpiece. Bottoming Tap: Generate threads to the bottom of holes. Add appropriate tapping oil for higher quality threads and more durable screw taps.
- Wide Applications: The thread tap kit is used to re-thread damaged or jammed threads. Suitable for tapping through or shallow holes in mild steels, aluminum, iron, copper, hard plastic.
- Hand Taps: Mainly for hand use, used with tap wrenches. Straight flute tap provides fast downward chip removal for efficient threading, clear threads without burrs, universal square shank.
- 9SiCr Steel Taps: 9SiCr steel is a commonly used low alloy tool steel with high hardening capacity, high wear resistance and low speed cutting.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #13
uxcell Metric Machine Tap M1.4 Thread 0.3 Pitch High Speed Steel Screw Taps Micro Threading Tapping Tool 10pcs
Asin: B07WJY6HKG
Wide Applications: The Thread Tap Is Suitable For Drilling Mild Steels, Aluminum, Iron, Copper, Stainless Steel, Hard Plastic, Processing Through Holes Or Shallow Holes. Add Appropriate Tapping Oil For Higher Quality Internal Threads And More Durable Taps..
Machine Taps: Used In Drilling Machines, Tapping Machines, Automatic Machines, Machining Centers, Cnc, Milling Machines, Not Recommended For Hand And Electric Drill Tapping. Recommended Feed Speed: Ordinary Steel: 6-15M/Min; Harder Steel Material: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
Straight Flute Tap: Straight 3 Flutes Are Ground To Provide Rapid Downward Chip Removal For Efficient Threading, Clear Threads Without Burrs, Right Hand Tapping Direction. Micro Taps Are Mainly Used In Clocks And Watches For Machining Holes In Wood And Soft Metals With Low Hardness..
High Speed Steel Tap: The Screw Tap Has High Wear Resistance, Fast Cutting Speed, High Strength And Hardness, And Long Service Life. With Uncoated Base Substrate Only, Suitable For General Purpose Tapping..
Features
- Thread Tap: Thread Size: M1.4 x 0.3; Shank Side Width: 2mm / 0.07 inch; Thread Length: 9mm / 0.35 inch; Total Length: 40mm / 1.57 inch
- High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping.
- Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps.
- Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness.
- Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min; harder steel material: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #14
uxcell Metric Tap and Drill Bit Set, M10 x 1.5 Thread Tap & 8.5mm Black Oxide Twist Drill Bit, Straight Flute Tap Tapping Threading Repair Tool Kit
Asin: B0CSFG96FQ
Features: Black Oxide Coating On Drill Bits Improves Durability, Corrosion Resistance And Lubricity, And Helps Reduce Friction And Heat, Extending Tool Life. Twist Drill Bit Has Sharp Cutting Edges And Large Spiral Grooves, Which Provide Neat And Smooth Cuts And Facilitate The Export Of Metal Chips..
Tips: Drill Holes With A Twist Drill Bit First, Then Tap With A Thread Tap. Tapping And Drilling Angle Should Be 90 Degrees Vertical And Stable. The Higher The Hardness, The Slower The Speed. The Tapping Depth Should Not Exceed 1.5 Times The Diameter Of The Tap (For Example, The Diameter M5x0.8 Is About 5Mm, And The Depth Should Not Exceed 7.5Mm.).
Easy To Use: Machine Taps Are Used In Drill Presses, Tapping, Cnc And Milling Machines. Use With Appropriate Lubricant (Such As Cutting Fluid Or Oil) To Get Higher Quality Threads And More Durable Tap & Drill Bit. Not Recommended For Hand Use And Electric Drill Tapping..
Wide Applications: Create New Threads Or Re-Thread Damaged Or Jammed Threads. Thread Tap Can Process Through Holes Or Shallow Blind Holes, With Downward Chip Removal, Right-Hand Cutting, And Fast And Accurate Tapping. Suitable For Most Metals, Cast Iron, Aluminum, Stainless Steel, Aluminum Alloy, Bronze And Hard Plastics..
Features
- Metric Tap and Drill Bit Set: Tap thread size: M10 x 1.5; drill bit size: 8.5mm. 6542 (M2) high speed steel Metric Tap and Drill Bit Set offers excellent heat resistance and hardness for durability and longevity, and good cutting performance.
- Wide Applications: Create new threads or re-thread damaged or jammed threads. Thread tap can process through holes or shallow blind holes, with downward chip removal, right-hand cutting, and fast and accurate tapping. Suitable for most metals, cast iron, aluminum, stainless steel, aluminum alloy, bronze and hard plastics.
- Features: Black oxide coating on drill bits improves durability, corrosion resistance and lubricity, and helps reduce friction and heat, extending tool life. Twist drill bit has sharp cutting edges and large spiral grooves, which provide neat and smooth cuts and facilitate the export of metal chips.
- Easy to Use: Machine taps are used in drill presses, tapping, CNC and milling machines. Use with appropriate lubricant (such as cutting fluid or oil) to get higher quality threads and more durable tap & drill bit. Not recommended for hand use and electric drill tapping.
- Tips: Drill holes with a twist drill bit first, then tap with a thread tap. Tapping and drilling angle should be 90 degrees vertical and stable. The higher the hardness, the slower the speed. The tapping depth should not exceed 1.5 times the diameter of the tap (for example, the diameter M5x0.8 is about 5mm, and the depth should not exceed 7.5mm.)
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #15
uxcell Adjustable Tap Wrench Handle, 3/16"-1/2" (UNC/UNF) / 3mm-16mm Capacity, Tap Reamer Tapping Wrench Tool,250mm Length
Asin: B00JR3O8TK | Model: a13112800ux0510 | PartNumber: a13112800ux0510 | Ean: 0700724725103 | UPC: 700724725103
Features: Tap Wrench Has 1 Rigid Handle And 1 Adjustable Handle That Adjusts The Jaws To Clamp Tools Easily And Firmly. Straight Tap Wrench Provides Great Leverage, And Is Specially Suitable For Larger-Diameter Taps.
Tips: The Force Of Both Hands Must Be Even When Operating The Tap Wrench. The Wrench And The Tap Should Form An Angle Of 90 Degrees, And The Tap And The Threaded Bottom Hole Are Perpendicular To Each Other.
Easy To Use: Operates With Both Hands To Rotate The Tap Wrench In A Certain Direction To Process, Repair And Clean The Internal Thread.
Applications: Hand Tap Wrench Can Clamp Various Taps For Tapping Operations. It Also Can Be Used With Drills, Reamers, Screw Extractors And Other Small Tools That Need To Be Rotated Manually.
Features
- Tap Wrench: Fit 3/16"-1/2" (UNC/UNF) / 3mm-16mm capacity, offering hardness and wear resistance. With distinct edges and corners, the wrench can clamp taps firmly and reliably
- Applications: Hand tap wrench can clamp various taps for tapping operations. It also can be used with drills, reamers, screw extractors and other small tools that need to be rotated manually
- Features: Tap wrench has 1 rigid handle and 1 adjustable handle that adjusts the jaws to clamp tools easily and firmly. Straight tap wrench provides great leverage, and is specially suitable for larger-diameter taps
- Easy To Use: Operates with both hands to rotate the tap wrench in a certain direction to process, repair and clean the internal thread
- Tips: The force of both hands must be even when operating the tap wrench. The wrench and the tap should form an angle of 90 degrees, and the tap and the threaded bottom hole are perpendicular to each other
- See more on Amazon...
Brand: uxcell | Manufacturer: Dragonmarts Co. Ltd. / Uxcell
Dimensions: 0.50 x 9.80 x 0.50 inches
See On Amazon #16
uxcell Metric Machine Thread Milling Tap M18 x 1.5 H2 Titanium Coated (Ti-coated) High Speed Steel 4 Straight Flutes Screw Thread Tapping Threading Machinist Repair DIY Tool
Asin: B0CWPCFW41
Suitable For Processing Through Holes Or Shallow Holes On Most Metals, Iron Plate, Copper, Zinc, Alloy Steel, Abrasive Steel, A3 Steel, Stainless Steel, Etc.. Add Appropriate Tapping Oil For Higher Quality Internal Threads And More Durable Taps..
Machine Taps Used With Drilling Machines, Tapping Machines, Automatic Machines, Machining Centers, Cnc, Milling Machines, Not Recommended For Hand And Electric Drill Tapping. Recommended Feed Speed: Ordinary Steel: 6-15M/Min; Harder Steel Material: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
Straight Flute Design, Rapid Downward Chip Removal For Efficient Threading, Clear Threads Without Burrs, Right Hand Tapping Direction. Good For Processing Through Holes Or Shallow Holes.
The Thread Tap Can Make New Threads Or Re-Thread Damaged Or Jammed Threads. Ti-Coated Taps Provide Capability, Durability And Long Service Life. Fits A Wide Range Of Applications..
Features
- Thread Size: M18 x 1.5. High-speed steel metric taps offer high hardness and good toughness for wear resistance, fast cutting speed and long service life, well suited for general purpose applications.
- The thread tap can make new threads or re-thread damaged or jammed threads. Ti-coated taps provide capability, durability and long service life. Fits a wide range of applications.
- Suitable for processing through holes or shallow holes on most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Add appropriate tapping oil for higher quality internal threads and more durable taps.
- Straight flute design, rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Good for processing through holes or shallow holes
- Machine taps used with drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min; harder steel material: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #17
uxcell 10-24 UNC Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel Screw Thread Cutting Die
Asin: B07SWHVVZT | Model: a19050800ux0952 | PartNumber: a19050800ux0952
Features: Conical Locking Hole, Strong Locking And Not Loose. Perfect For Re-Threading Existing Threads In Hard Materials Like Metal And Making New Threads In Soft Material Such As Plastic. The Surface Is Lubricated With Grease To Prevent Rust, The Thread Is Clear And Easy To Repair..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping The Thread. The Bar Diameter Should Be Smaller ( About 0.05Mm-0.15Mm) Than The Nominal Diameter Of The Required Thread. Excessive Diameter Can Easily Cause Difficult Cutting And Lead To Damage To The Die Teeth..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened. The End Of The Bar Should Be Chamfered 1*45 Degree, And The Chamfer Is Too Large To Cut In..
Applications: Can Process, Correct Or Clean The External Threads. Suitable For General Purpose Threading In Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic, Etc.. Great For Maintenance And Repair Work On Pipes, Boards And Machinery..
Features
- Round Die: Thread size: 10-24 UNC; outside diameter (OD): 20mm / 0.8"; Thickness: 7mm / 0.28"; accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance.
- Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery.
- Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #18
uxcell 10-24 UNC Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel Screw Thread Cutting Die, 2pcs
Asin: B07ST8TJFR | Model: a19050800ux0953 | PartNumber: a19050800ux0953
Features: Conical Locking Hole, Strong Locking And Not Loose. Perfect For Re-Threading Existing Threads In Hard Materials Like Metal And Making New Threads In Soft Material Such As Plastic. The Surface Is Lubricated With Grease To Prevent Rust, The Thread Is Clear And Easy To Repair..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping The Thread. The Bar Diameter Should Be Smaller ( About 0.05Mm-0.15Mm) Than The Nominal Diameter Of The Required Thread. Excessive Diameter Can Easily Cause Difficult Cutting And Lead To Damage To The Die Teeth..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened. The End Of The Bar Should Be Chamfered 1*45 Degree, And The Chamfer Is Too Large To Cut In..
Applications: Can Process, Correct Or Clean The External Threads. Suitable For General Purpose Threading In Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic, Etc.. Great For Maintenance And Repair Work On Pipes, Boards And Machinery..
Features
- Round Die: Thread size: 10-24 UNC; outside diameter (OD): 20mm / 0.8"; Thickness: 7mm / 0.28"; accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance.
- Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery.
- Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #19
uxcell M5 x 0.8 Spiral Point Threading Tap, H2 Tolerance High Speed Steel TICN Coated, Round Shank with Square End, DIN371/376, Metric Screw Taps Tapping Bit for Thread Repair, 2pcs
Asin: B08J6B4T4F | Model: a20010400ux0036 | PartNumber: a20010400ux0036
Applications: Thread Taps Are Great For Through-Hole Threads. Can Be Used For Drilling And Tapping Stainless Steel, Aluminum, Alloy Steel, Ordinary Steel, Cast Iron, Non-Ferrous Metals, Hard Plastics, Etc. Flutes On The Screw Tap Help To Remove Chips And Debris From The Hole..
Warm Tips: Machine Taps Are Suggested To Be Used With Tap Chucks With Overload Protection. It Is Not Recommended For Hand Use And Electric Drill Tapping. Micro Taps (Such As M1-M3.5) Are Mainly Used For Clocks, Watches, Low-Hardness Woods, And Soft Metals..
How To Use: Suitable For Drill Presses, Tapping Machines, Cnc And Milling Machines. Used With Tapping Oil To Get Higher Quality Threads And More Durable Taps. The Point Of The Tap Helps Guide It Into The Hole And Reduces The Torque Required To Turn It..
Material & Finish: 6542 High Speed Steel Metric Taps Run At High Speeds And Generate Threads Quickly And Efficiently, Offering High Hardness (Hrc62-64), Wear Resistance, And Good Toughness. Ticn Coating For Improving Wear Resistance, Hardness, Heat Resistance, Lubricity..
Features
- Spiral Point Tap: M5 x 0.8 thread with H2 tolerance, DIN371/376 standard, right hand thread cutting. Straight flutes taps provide provide downward chip removal, with clear threads and sharp cutting edges.
- Material & Finish: 6542 high speed steel metric taps run at high speeds and generate threads quickly and efficiently, offering high hardness (HRC62-64), wear resistance, and good toughness. TICN coating for improving wear resistance, hardness, heat resistance, lubricity.
- Applications: Thread taps are great for through-hole threads. Can be used for drilling and tapping stainless steel, aluminum, alloy steel, ordinary steel, cast iron, non-ferrous metals, hard plastics, etc. Flutes on the screw tap help to remove chips and debris from the hole.
- How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps. The point of the tap helps guide it into the hole and reduces the torque required to turn it.
- Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping. Micro taps (such as M1-M3.5) are mainly used for clocks, watches, low-hardness woods, and soft metals.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #20
uxcell Machine Tap 3/16-32 UN Thread 2B High Speed Steel Screw Taps Threading Tapping Tool
Asin: B07Y57RZMS | Model: a19081500ux0018 | PartNumber: a19081500ux0018
Wide Applications: The Thread Tap Is Suitable For Drilling Mild Steels, Aluminum, Iron, Copper, Stainless Steel, Hard Plastic, Processing Through Holes Or Shallow Holes. Add Appropriate Tapping Oil For Higher Quality Internal Threads And More Durable Taps..
Machine Taps: Used In Drilling Machines, Tapping Machines, Automatic Machines, Machining Centers, Cnc, Milling Machines, Not Recommended For Hand And Electric Drill Tapping. Recommended Feed Speed: Ordinary Steel: 6-15M/Min; Harder Steel Material: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
Straight Flute Tap: Straight 3 Flutes Are Ground To Provide Rapid Downward Chip Removal For Efficient Threading, Clear Threads Without Burrs, Right Hand Tapping Direction. Micro Taps Are Mainly Used In Clocks And Watches For Machining Holes In Wood And Soft Metals With Low Hardness..
High Speed Steel Tap: The Screw Tap Has High Wear Resistance, Fast Cutting Speed, High Strength And Hardness, And Long Service Life. With Uncoated Base Substrate Only, Suitable For General Purpose Tapping..
Features
- Thread Tap: Thread Size: 3/16-32 UN; Class: 2B; Thread Length: 22mm / 0.87 inch; Total Length: 60mm / 2.36 inch
- High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping.
- Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps.
- Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness.
- Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min; harder steel material: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon
Looking For Something Else?
Search