HSS 12mm x 45 Degree Dovetail Cutter Milling End Mill High Speed Steel
Asin: B091Y96NDK | Model: HA2237 | PartNumber: HA2237
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.☆The Ideal Cutter For Milling Dovetails, Right Hand Cutting..
☆It Fits For Meatalworking Mold Steel, Cast Iron, Carbon Steel, Alloy Steel, Tool Steel, General Iron Material..
☆Cutting Edge Is Double-Edged, Angular Distribution Was Given, More Teeth, Smooth Cut..
☆Cutter Diameter(D): 10 Size For You Choose..
Features
- HSS material, durable and long service life.
- Cutter diameter(D): 10 Size for you choose.
- The ideal cutter for milling dovetails, right hand cutting.
- Cutting edge is double-edged, angular distribution was given, more teeth, smooth cut.
- It fits for meatalworking mold steel, cast iron, carbon steel, alloy steel, tool steel, general iron material.
- See more on Amazon...
Brand: SENRISE | Manufacturer: SENRISE
See On Amazon Similar To HSS 12mm x 45 Degree
#1
OCGIG 4pcs Countersink Chamfer Tool HSS(4241) Deburring Tool Set Metal Wood Drill Bits
Asin: B07P543FGB | Model: OCG-TL219 | PartNumber: OCG-TL219
Ideal For Cutting Through Metal, Wood And Plastic (Hardness <25 Degrees).
This Bits Should Use The Bench Drill , It Is Easy To Shake And It Will Affect The Chamfering Effect If You Use The Hand Drill.
90° Angle On The Point For Sharp And Precise Countersinking, Used For Workpiece Circular Aperture Chamfering Or Cone Hole.
Shank Type: Round, Sizes: 2-5Mm,5-10Mm, 10-15 Mm, 15-20Mm.
Features
- Material: High Speed Steel HSS (4241)
- Shank type: round, Sizes: 2-5mm,5-10mm, 10-15 mm, 15-20mm
- Ideal for cutting through metal, wood and plastic (hardness <25 degrees)
- 90 angle on the point for sharp and precise countersinking, used for workpiece circular aperture chamfering or cone hole
- This bits should use the bench drill , it is easy to shake and it will affect the chamfering effect if you use the hand drill
- See more on Amazon...
Brand: OCGIG | Manufacturer: OCGIG
See On Amazon #2
HSS 25mm x 45 Degree Dovetail Cutter Milling End Mill High Speed Steel
Asin: B07FWYLR1V | Model: 25mm x 45 | PartNumber: 25mm x 45 | Ean: 0755320652780 | UPC: 755320652780
Cutting Diameter: 25Mm.
Package Included: 1 X Dovetail Cutter.
Shank Diameter: 12Mm.
45° Included Angle, Right Hand Cutting..
Features
- Made of high speed steel
- 45 included angle, Right hand cutting.
- Cutting diameter: 25mm
- Shank diameter: 12mm
- Package Included: 1 x Dovetail cutter
- See more on Amazon...
Brand: Yodaoke | Manufacturer: Yodaoke
See On Amazon #3
uxcell 12pcs Jobber Drill Bits 4mm Black Nitride & Gold Titanium Coated 4341 High Speed Steel (HSS) 135 Degree Split Point Twist Drill Bits for Stainless Steel Metal Plastic Wood
Asin: B0CKYN3677
Black & Gold Finish: Premium Black Nitride And Gold Titanium Dual Coatings Can Apply Lubricant Better For Smoother Drilling And Are More Durable And Corrosion Resistant. The Black And Gold Finish Helps To Extend The Tool Life..
Notices: Use An Appropriate Lubricant, Make Sure The Drill Bit Is Tightened Securely, Keep The Drill Bit Perpendicular To The Work Surface, And Apply Steady Pressure To The Drill Bit. Controlling The Speed Is Very Important. Not Suitable For Tiles, Concrete, Walls, Stones..
Wide Applications: The Drill Bits Can Drill Clean And Accurate Holes In Stainless Steel, Cast Iron, A3 Steel, Carbon Steel, Aluminum Alloy, Copper, Wood And Plastic. Sharp Cutting Edges Provide Neat And Smooth Cuts. Large Spiral Grooves Facilitate The Export Of Metal Chips..
4341 High Speed Steel: It Contains High Content Of Carbon And Alloy Elements, Providing Excellent Cutting Performance, High Heat Resistance, High Hardness, Wear Resistance And Durability. Good For Applications Requiring Precise And Efficient Processing..
Features
- Drill Bit Features: Cutting edge diameter: 4mm / 0.157"; round shank diameter: 4mm / 0.157"; cutting edge length: 45mm / 1.77"; overall length: 75mm / 2.95"; split point: 135 degree. Suitable for handheld drills, drilling machines, bench drills, machining centers, CNC lathes.
- 4341 High Speed Steel: It contains high content of carbon and alloy elements, providing excellent cutting performance, high heat resistance, high hardness, wear resistance and durability. Good for applications requiring precise and efficient processing.
- Black & Gold Finish: Premium black nitride and gold titanium dual coatings can apply lubricant better for smoother drilling and are more durable and corrosion resistant. The black and gold finish helps to extend the tool life.
- Wide Applications: The drill bits can drill clean and accurate holes in stainless steel, cast iron, A3 steel, carbon steel, aluminum alloy, copper, wood and plastic. Sharp cutting edges provide neat and smooth cuts. Large spiral grooves facilitate the export of metal chips.
- Notices: Use an appropriate lubricant, make sure the drill bit is tightened securely, keep the drill bit perpendicular to the work surface, and apply steady pressure to the drill bit. Controlling the speed is very important. NOT suitable for tiles, concrete, walls, stones.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #4
WSF-TOOLS, 45 Degree Premium HSS Dovetail Cutter End Mill Milling High Speed Steel 12mm 16mm 18mm 20mm (Cutting Edge Length : 12mm)
Asin: B07X8B8YF6 | Ean: 8850025066909
Package Included:1X Hss Dovetail Cutter Milling.
Application Materials: Mold Steel, Cast Iron, Carbon Steel, Alloy Steel, Tool Steel, And Other Material..
Features: Cutting Edge Is Double-Edged, Angular Distribution, More Number Of Teeth, Cutting Steady..
Milling Angle(Θ): 45°.
Features
- Diameter: Mill Milling,Overall Length: Dovetail Cutter,Type: Dovetail Milling Cutters
- Milling angle( ): 45
- Package included:1x HSS Dovetail Cutter Milling
- Features: cutting edge is double-edged, angular distribution, more number of teeth, cutting steady.
- Application materials: mold steel, cast iron, carbon steel, alloy steel, tool steel, and other material.
- See more on Amazon...
Brand: WSF-TOOLS, | Manufacturer: WSF-TOOLS,
Weight: 0.00 pounds
See On Amazon #5
uxcell 12pcs Jobber Drill Bits 3.5mm (0.138") Black Nitride & Gold Titanium Coated M2 High Speed Steel (HSS) Twist Drill Bits for Stainless Steel Aluminum Alloy Metal
Asin: B0CN9GGGV2
Black & Gold Finish: Black Nitride And Gold Titanium Dual Coatings Can Apply Lubricant Better For Smoother Drilling And Are More Durable And Corrosion Resistant. Sharp Cutting Edges Provide Neat And Smooth Cuts. Large Spiral Grooves Facilitate The Export Of Metal Chips..
Tips: Use An Appropriate Lubricant To Reduce Friction And Heat Build-Up. Controlling The Speed Is Very Important, Recommended Speed: 100-800Rpm/Min. The Larger The Diameter, The Slower The Speed Required. If The Hole Is Larger Than 6Mm, First Drill A Small Hole With A 3.2Mm-4Mm Drill Bit, And Then Use A Larger Drill Bit To Enlarge The Hole..
Wide Applications: Drill Bits Produce Holes In Stainless Steel, Cast Iron, A3 Steel, Carbon Steel, Aluminum Alloy, Copper, Wood And Plastic. Most Suitable For Drilling Metals With A Hardness Less Than Hrc38, And Cannot Drill Quenched Metals, Tiles, Concrete, Walls, Stones..
M2 High Speed Steel: M2 High Speed Steel (Hrc64-66) Drill Bits Offer Excellent Heat Resistance And Hardness For Durability And Longevity, As Well As Good Cutting Performance And Accuracy For Clean, Precise Holes With Minimal Burrs..
Features
- Twist Drill Bits: Cutting edge diameter: 3.5mm / 0.138"; round shank diameter: 3.5mm / 0.138"; cutting edge length: 45mm / 1.77"; overall length: 70mm / 2.76"; split point: 135 degree. Used with hand drills, drill presses, bench drills, machining centers, CNC lathes, etc.
- M2 High Speed Steel: M2 high speed steel (HRC64-66) drill bits offer excellent heat resistance and hardness for durability and longevity, as well as good cutting performance and accuracy for clean, precise holes with minimal burrs.
- Black & Gold Finish: Black nitride and gold titanium dual coatings can apply lubricant better for smoother drilling and are more durable and corrosion resistant. Sharp cutting edges provide neat and smooth cuts. Large spiral grooves facilitate the export of metal chips.
- Wide Applications: Drill bits produce holes in stainless steel, cast iron, A3 steel, carbon steel, aluminum alloy, copper, wood and plastic. Most suitable for drilling metals with a hardness less than HRC38, and cannot drill quenched metals, tiles, concrete, walls, stones.
- Tips: Use an appropriate lubricant to reduce friction and heat build-up. Controlling the speed is very important, recommended speed: 100-800rpm/min. The larger the diameter, the slower the speed required. If the hole is larger than 6mm, first drill a small hole with a 3.2mm-4mm drill bit, and then use a larger drill bit to enlarge the hole.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #6
End Mill Bits, HSS CNC End Mill Cutter for Wood, Aluminum, Steel, Titanium, Straight 4 Flute Mill Bit Set of 6 3mm,4mm,6mm,8mm,10mm,12mm
Asin: B07G1BD1WT | Model: HEA0304/0404/0604/0804/1004/1204 | PartNumber: HEA0304/0404/0604/0804/1004/1204 | Ean: 8011474646603
3.One Set Of End Mill Bits Including: 6 Different Kinds Of Size End Mills To Meet Your Need, 3Mm, 4Mm,6Mm, 8Mm,10Mm,12Mm.
5.End Mill Bits Are Suitable For Side Milling, End Milling, Finish Machining, Etc. Apply To Carbon Steel, Alloy Steel, Die Steel, Tool Steel, Cast Iron, Titanium, Aluminum, Etc..
4.Hardness Of Metal For Above Hrc 45 Degrees,With High Bending Resistance And Abrasion Resistance, Exclusive To High Hardness, High Speed Cutting Applications..
2.Material: Hss ;Product Name : End Mill.
Features
- 1.Four flutes produce a better finish than fewer flutes.
- 2.Material: HSS ;Product Name : End Mill
- 3.One Set of end mill bits Including: 6 Different kinds of Size end mills to meet your need, 3mm, 4mm,6mm, 8mm,10mm,12mm
- 4.Hardness of metal for above HRC 45 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications.
- 5.End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc.
- See more on Amazon...
Brand: UDK | Manufacturer: UDK
See On Amazon #7
HSS 16mm x 45 Degree Dovetail Cutter Milling End Mill High Speed Steel
Asin: B07FX2BFC6 | Model: 16mm x 45 | PartNumber: 16mm x 45 | Ean: 0755320652865 | UPC: 755320652865
Cutting Diameter: 16Mm.
Package Included: 1 X Dovetail Cutter.
Shank Diameter: 12Mm.
45° Included Angle, Right Hand Cutting..
Features
- Made of high speed steel
- 45 included angle, Right hand cutting.
- Cutting diameter: 16mm
- Shank diameter: 12mm
- Package Included: 1 x Dovetail cutter
- See more on Amazon...
Brand: Yodaoke | Manufacturer: Yodaoke
See On Amazon #8
uxcell M1.6 X 0.35 Metric Round Die, Machine Thread Right Hand Threading Die, Alloy Steel Screw Thread Cutting Die
Asin: B07R9VGF4C | Model: a18122900ux0427 | PartNumber: a18122900ux0427
Features: Conical Locking Hole, Strong Locking And Not Loose. Perfect For Re-Threading Existing Threads In Hard Materials Like Metal And Making New Threads In Soft Material Such As Plastic. The Surface Is Lubricated With Grease To Prevent Rust, The Thread Is Clear And Easy To Repair..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping The Thread. The Bar Diameter Should Be Smaller ( About 0.05Mm-0.15Mm) Than The Nominal Diameter Of The Required Thread. Excessive Diameter Can Easily Cause Difficult Cutting And Lead To Damage To The Die Teeth..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened. The End Of The Bar Should Be Chamfered 1*45 Degree, And The Chamfer Is Too Large To Cut In..
Applications: Can Process, Correct Or Clean The External Threads. Suitable For General Purpose Threading In Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic, Etc.. Great For Maintenance And Repair Work On Pipes, Boards And Machinery..
Features
- Round Die: Thread size: M1.6 X 0.35; outside diameter (OD): 12mm / 0.47"; Thickness: 3mm / 0.12"; fine grinding. Made of alloy steel, hardness, high torque, good toughness and wear-resistance for long service life.
- Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery.
- Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #9
uxcell M2 x 0.4 Metric Round Die, Machine Thread Left Hand Threading Die, Alloy Steel Screw Thread Cutting Die
Asin: B07R9JH2SR | Model: a18122900ux0464 | PartNumber: a18122900ux0464
Features: Conical Locking Hole, Strong Locking And Not Loose. Perfect For Re-Threading Existing Threads In Hard Materials Like Metal And Making New Threads In Soft Material Such As Plastic. The Surface Is Lubricated With Grease To Prevent Rust, The Thread Is Clear And Easy To Repair..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping The Thread. The Bar Diameter Should Be Smaller ( About 0.05Mm-0.15Mm) Than The Nominal Diameter Of The Required Thread. Excessive Diameter Can Easily Cause Difficult Cutting And Lead To Damage To The Die Teeth..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened. The End Of The Bar Should Be Chamfered 1*45 Degree, And The Chamfer Is Too Large To Cut In..
Applications: Can Process, Correct Or Clean The External Threads. Suitable For General Purpose Threading In Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic, Etc.. Great For Maintenance And Repair Work On Pipes, Boards And Machinery..
Features
- Round Die: Thread size: M2 x 0.4; outside diameter (OD): 12mm / 0.47"; Thickness: 3mm / 0.12"; fine grinding. Made of alloy steel, hardness, high torque, good toughness and wear-resistance for long service life.
- Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery.
- Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #10
Adv-one HSS 45-60 Degree Straight Shank Dovetail Cutter End Mill Slot Milling Cutter 8 Flutes (20 * 45MM)
Asin: B07B9YX81R | Ean: 0736364603006 | UPC: 736364603006
Safety Instructions: Razor Blades Permanently Enclosed In A Cartridge Or Housing With Less Than 2Mm Of Blade Exposed. The Bladed Product Is Not Use For People Under 18 Years. The Item Is Only Use For Industrial Cutting/Engraving, Not Hazardous Article..
The Bladed Product Is Not Use For People Under 18 Years.
Cutter Diameter(D): 10Mm,12Mm,14Mm,16Mm,18Mm,20Mm,25Mm,35Mm.
Cutting Edge Is Double-Edged, Angular Distribution Was Given, More Teeth, Smooth Cut..
Features
- Suitable material: die steel, cast iron, carbon steel, chisel tool steel, normal iron material.
- Cutting edge is double-edged, angular distribution was given, more teeth, smooth cut.
- Safety instructions: Razor blades permanently enclosed in a cartridge or housing with less than 2mm of blade exposed. The bladed product is not use for people under 18 years. The item is only use for industrial cutting/engraving, not hazardous article.
- Cutter diameter(D): 10mm,12mm,14mm,16mm,18mm,20mm,25mm,35mm
- The bladed product is not use for people under 18 years
- See more on Amazon...
Brand: Adv-one | Manufacturer: Adv-one
See On Amazon #11
12mm X 60 Degree HSS Straight Shank Dovetail Slot Cutter End Mill CNC Bit
Asin: B01JU4APJW | Ean: 0710525415189 | UPC: 710525415189
Cutting Diameter:12Mm/0.47";.
Total Length:57Mm/2.24";.
Angle:60 Degree;.
Cutting Depth:4Mm/0.16";.
Features
- Shank Diameter:10mm/0.39";
- Cutting Depth:4mm/0.16;
- Cutting Diameter:12mm/0.47;
- Angle:60 Degree;
- Total Length:57mm/2.24;
- See more on Amazon...
Brand: MAYAGU | Manufacturer: MAYAGU
See On Amazon #12
1/2" x 45 Degree HSS Dovetail Cutter Milling Mill Cutting High Speed Steel
Asin: B0CJ8T3FRN | Ean: 0747785408750 | UPC: 747785408750
1/2'' Cutting Diameter.
Overall Length: 2''.
3/8'' Shank Diameter.
Made Of Precision Ground High Grade Tool Steel.
Features
- 1/2'' x 45 degree HSS Dovetail Cutter
- Made Of Precision ground High Grade Tool Steel
- 1/2'' Cutting Diameter
- 3/8'' Shank Diameter
- Overall Length: 2''
- See more on Amazon...
Brand: Prolinemax | Manufacturer: PROLINEMAX
See On Amazon #13
uxcell M1.4 X 0.3 Metric Round Die, Machine Thread Right Hand Threading Die, Alloy Steel Screw Thread Cutting Die
Asin: B07R78591H | Model: a18122900ux0426 | PartNumber: a18122900ux0426
Features: Conical Locking Hole, Strong Locking And Not Loose. Perfect For Re-Threading Existing Threads In Hard Materials Like Metal And Making New Threads In Soft Material Such As Plastic. The Surface Is Lubricated With Grease To Prevent Rust, The Thread Is Clear And Easy To Repair..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping The Thread. The Bar Diameter Should Be Smaller ( About 0.05Mm-0.15Mm) Than The Nominal Diameter Of The Required Thread. Excessive Diameter Can Easily Cause Difficult Cutting And Lead To Damage To The Die Teeth..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened. The End Of The Bar Should Be Chamfered 1*45 Degree, And The Chamfer Is Too Large To Cut In..
Applications: Can Process, Correct Or Clean The External Threads. Suitable For General Purpose Threading In Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic, Etc.. Great For Maintenance And Repair Work On Pipes, Boards And Machinery..
Features
- Round Die: Thread size: M1.4 X 0.3; outside diameter (OD): 12mm / 0.47"; Thickness: 3mm / 0.12"; fine grinding. Made of alloy steel, hardness, high torque, good toughness and wear-resistance for long service life.
- Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery.
- Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #14
1 Pc 1/2" X 45 Degree Premium HSS Dovetail Cutter Milling High Speed Steel
Asin: B01NADMZM5 | Ean: 0647829665586 | UPC: 647829665586
45° Included Angle, Right Hand Cutting.
1/2" Cutting Diameter 3/8" Shank Diameter (With Weldon Flat).
Made Of Precision Ground, High Grade Tool Steel.
Features
- Our Part # ALL-19502
- Made of precision ground, high grade tool steel
- 45 included angle, right hand cutting
- 1/2 cutting diameter 3/8 shank diameter (with Weldon flat)
- See more on Amazon...
Brand: All Industrial Tool Supply | Manufacturer: MHC Industrial Supply
Weight: 0.06 Pounds
See On Amazon #15
1 Pc 1" X 45 Degree Premium HSS Dovetail Cutter Milling High Speed Steel
Asin: B01MQQIOM0 | Ean: 0647829665623 | UPC: 647829665623
45° Included Angle, Right Hand Cutting.
1" Cutting Diameter 1/2" Shank Diameter (With Weldon Flat).
Made Of Precision Ground, High Grade Tool Steel.
Features
- Our Part # ALL-19506
- Made of precision ground, high grade tool steel
- 45 included angle, right hand cutting
- 1 cutting diameter 1/2 shank diameter (with Weldon flat)
- See more on Amazon...
Brand: All Industrial Tool Supply | Manufacturer: MHC Industrial Supply
Weight: 0.16 pounds
See On Amazon #16
1 Pc 3/8" X 45 Degree Premium HSS Dovetail Cutter Milling High Speed Steel
Asin: B01MXSP71G | Ean: 0647829665562 | UPC: 647829665562
45° Included Angle, Right Hand Cutting Tool.
3/8" Cutting Diameter 3/8" Shank Diameter (With Weldon Flat).
Made Of Precision Ground, High Grade Tool Steel.
Features
- Our Part # ALL-19500
- Made of precision ground, high grade tool steel
- 45 included angle, right hand cutting tool
- 3/8 cutting diameter 3/8 shank diameter (with Weldon flat)
- See more on Amazon...
Brand: All Industrial Tool Supply | Manufacturer: MHC Industrial Supply
Weight: 0.06 pounds
See On Amazon #17
25mm X 45 Degree HSS Straight Shank Dovetail Slot Cutter End Mill CNC Bit
Asin: B01JUD7OI8 | Ean: 0710525415271 | UPC: 710525415271
Cutting Depth:10Mm/0.39".
Angle:45 Degree.
Cutting Diameter:25Mm/0.98".
Shank Diameter:12Mm/0.47".
Features
- Material:HSS
- Shank Diameter:12mm/0.47
- Cutting Depth:10mm/0.39
- Cutting Diameter:25mm/0.98
- Angle:45 Degree
- See more on Amazon...
Brand: MAYAGU | Manufacturer: MAYAGU
See On Amazon #18
CoCud Tap and Drill Bit Set, M2.6 x 0.45 Tap Thread 2.1mm Drill Diameter, Left Hand Metric Machine Screw Tap & Twist Drill Bit Tool Kit - (Applications: for Threading Tapping), 1-Set
Asin: B0CCKWKWGV
★ Ease Of Use --- The Machine Tap Is Designed With Straight Flutes And Fast Downward Chip Removal, Suitable For Tapping Machines, Drilling Machines, Cnc And Milling Machines. The Drill Bit With Sharp Spiral Flutes Can Create Smooth And Accurate Holes, And Allow Faster Drilling Speeds, Export Of Metal Chips, And Improved Coolant Flow..
★ Useful Tips --- Apply A Suitable Lubricant Helps To Prolong The Life, Reduce Friction, And Improve Hole And Thread Quality. Drill A Hole With The Correct Size Drill Bit Before Tapping. Make Sure The Tool Is Properly Aligned With The Workpiece And Has Enough Clearance To Remove Chips. Always Use The Correct Speed And Pressure..
★ High-Speed Steel --- The 6542 High-Speed Steel (Hss) Tap Combines Hardness And Toughness, With Excellent Wear Resistance And Durability. M35 5% Cobalt High Speed Steel (Hss-Co) Drill Bit Provides Excellent Wear Resistance, Durability, Heat Resistance, And Optimal Chip Removal..
★ Wide Applications --- Repair Damaged Threads Or Create New Threads In Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, And Plastic. The Tap Is Used For Tapping Internal Threads In Through Holes Or Shallow Blind Holes, Such As Threads In Nuts, Threaded Inserts, Pipes, Valves, Parts, Furniture..
Features
- Tap and Drill Bit Set Size --- Screw tap: thread size: M2.6 x 0.45; tapping direction: left hand; accuracy: H2; square shank size: 2.5mm / 0.1"; thread length: 12mm / 0.47"; overall length: 45mm / 1.77". Drill Bit: diameter: 2.1mm / 0.083"; flute Length: 23mm / 0.91"; overall Length: 48mm / 1.89"; point angle: 108 degree
- Wide Applications --- Repair damaged threads or create new threads in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, and plastic. The tap is used for tapping internal threads in through holes or shallow blind holes, such as threads in nuts, threaded inserts, pipes, valves, parts, furniture.
- Ease of Use --- The machine tap is designed with straight flutes and fast downward chip removal, suitable for tapping machines, drilling machines, CNC and milling machines. The drill bit with sharp spiral flutes can create smooth and accurate holes, and allow faster drilling speeds, export of metal chips, and improved coolant flow.
- High-speed Steel --- The 6542 high-speed steel (hss) tap combines hardness and toughness, with excellent wear resistance and durability. M35 5% cobalt high speed steel (hss-co) drill bit provides excellent wear resistance, durability, heat resistance, and optimal chip removal.
- Useful Tips --- Apply a suitable lubricant helps to prolong the life, reduce friction, and improve hole and thread quality. Drill a hole with the correct size drill bit before tapping. Make sure the tool is properly aligned with the workpiece and has enough clearance to remove chips. Always use the correct speed and pressure.
- See more on Amazon...
Brand: CoCud | Manufacturer: CoCud
See On Amazon #19
uxcell HSS Lathe Tool Bit 8mm x 45mm x 200mm, Square Lathe Turning Tool Blanks, High Speed Steel Rectangular Fly Cutter Mill Blank
Asin: B07KT3CG9M
Versatile Tool Bit: Ideal For Milling, Turning, Parting, Engraving, Drilling, Punching, Etc. Commonly Used On A Lathe, A Milling Machine Fly Cutter Or A Metal Shaper.
High-Speed Steel Tool: High-Speed Steel Tool Bit Is With Combination Of Hardness And Toughness For Wear Resistance.
Features: Parallel Style Cutter Is With Continuous Width Of Cutting Edge Throughout Length Of Tool Bit.
General Purpose: Hss Tool Bit Is A Superior Finishing Tool For Cuts In Hard Materials Of Mild Steel, Alloy And Tool Steel.
Features
- Specifications: Size: 8mm x 45mm x 200mm, hardness HRC60~62. High-speed steel lathe tool bit
- General Purpose: HSS tool bit is a superior finishing tool for cuts in hard materials of mild steel, alloy and tool steel
- Versatile Tool Bit: Ideal for milling, turning, parting, engraving, drilling, punching, etc. Commonly used on a lathe, a milling machine fly cutter or a metal shaper
- Features: Parallel style cutter is with continuous width of cutting edge throughout length of tool bit
- High-speed Steel Tool: High-speed steel tool bit is with combination of hardness and toughness for wear resistance
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 7.87 x 1.97 inches
See On Amazon
Looking For Something Else?
Search