CIEOVO 12 Pack Shelf Support Peg,Self Adhesive Clips,Strong Partition Pin for Kitchen Cabinet Book Shelves Closet Brackets Clapboard Layer, Modular
Asin: B092SCV2M5 | Ean: 0797006797767 | UPC: 797006797767
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Easy To Install: Self Adhesive Bracket, Free-Hole, No Need Tools Can Be Used To Finish The Installation Work Quickly..
Beautiful And Generous: Made Of Completely Transparent Plastic, Suitable For Various Styles Of Cabinets. When You Need To Change The Design, You Can Take It Off Without Leaving Ugly Holes And Marks In The Cabinet..
Suitable For A Variety Of Cabinets And Walls: It Can Be With Metal, Glass, Wood, Marble, Ceramic Tiles, Plastic And Other Hard And Smooth Surface Firmly Bonded..
Stronger Capacity: High Strength Supports Peg And Better Quality Adhesive, Each Of Shelf Support Peg Can Carry Not Less Than 16 Pounds Of Weight, You Can Use 4Pcs Or More Supports Peg To Support The Same Shelf To Increase The Bearing Capacity..
Features
- Unique split design: flexible and convenient, higher strength.
- Stronger capacity: high strength supports peg and better quality adhesive, each of shelf support peg can carry not less than 16 pounds of weight, you can use 4pcs or more supports peg to support the same shelf to increase the bearing capacity.
- Easy to install: self adhesive bracket, free-hole, no need tools can be used to finish the installation work quickly.
- Suitable for a variety of cabinets and walls: it can be with metal, glass, wood, marble, ceramic tiles, plastic and other hard and smooth surface firmly bonded.
- Beautiful and generous: made of completely transparent plastic, suitable for various styles of cabinets. When you need to change the design, you can take it off without leaving ugly holes and marks in the cabinet.
- See more on Amazon...
Brand: CIEOVO | Manufacturer: X-AT
Dimensions: 1.10 x 4.96 x 4.33 Inches
See On Amazon Similar To CIEOVO 12 Pack Shelf Support
#1
Prime-Line U 10169, Nickel Plated Shelf Support, 1/4 Inch - Pack of 8
Asin: B00E8HUZBA | Model: U 10169 | PartNumber: U 10169 | Ean: 0049793101693 | UPC: 049793101693
Features A 1/4 Inch Outside Peg Diameter With A 1/2 Inch Wide And 11/16 Inch Length Seat.
Please Refer To The Line Art Drawing For Dimensions And Compare With Your Needs Before Ordering.
Each Shelf Peg Has A Maximum Capacity Load Of 20 Pounds.
There Are 8 Shelf Support Pegs Per Package.
Comes In A Steel Construction With A Nickel Plated Finish.
L-Shaped Metal Peg With Screw Hole To Secure The Peg To The Shelf.
Features
- Used to support adjustable shelving in cabinets, bookshelves and a variety of other storage units
- L-shaped metal peg with screw hole to secure the peg to the shelf
- Features a 1/4 inch outside peg diameter with a 1/2 inch wide and 11/16 inch length seat
- Comes in a steel construction with a nickel plated finish
- Each shelf peg has a maximum capacity load of 20 pounds
- There are 8 shelf support pegs per package
- Please refer to the line art drawing for dimensions and compare with your needs before ordering
- See more on Amazon...
Brand: PRIME-LINE | Manufacturer: Prime-Line Products
Dimensions: 1.18 x 0.50 x 0.50 inches | Weight: 0.00 pounds
Warranty: Goods are warranted against manufacturing defects for 1 year. In no case is Prime-Line responsible for user related damage or damage incurred during installation. Warranty is void if products are subjected to abnormal conditions, misapplication or abuse.
See On Amazon #2
ClosetMaid 56606 12-Inch Support Brackets for Wire Shelving, 2-pack,White
Asin: B00NNRIEO6 | Model: 56606 | PartNumber: 56606 | Ean: 0075381566063 | UPC: 075381566063
Use 1 Bracket Every 36 Inches And At Each End Of Shelf.
Use With Closetmaid 16-Inch Deep Shelving When Used For Hanging Clothing.
For Use With All Closetmaid 12-Inch Shelving.
Supports Front Lip Of Shelving.
Features
- Package for 12-inch bracket includes 2 brackets, 2 anchors, and 2 #8 pins
- Supports front lip of shelving
- Use 1 bracket every 36 inches and at each end of shelf
- For use with all ClosetMaid 12-inch shelving
- Use with ClosetMaid 16-inch deep shelving when used for hanging clothing
- See more on Amazon...
Brand: ClosetMaid | Manufacturer: ClosetMaid
Dimensions: 2.00 x 20.00 x 2.00 inches | Weight: 0.54 Pounds
Warranty: Manufacturer will replace any missing or damaged part due to manufacturer defect for 30 days after purchase. Please have proof of purchase for warranty claims. Combining ClosetMaid branded products with third party components or products will void the ClosetMaid manufacturer’s warranty.
See On Amazon #3
ClosetMaid 21775 12-Inch Support Brackets for Wire Shelving, White,12-pack
Asin: B002GJZYI6 | Model: 21775 | PartNumber: 21775 | Ean: 0782273339703, 6642526707250, 0885503317363, 6091602752682, 0075381017756, 6007795110970 | UPC: 782273339703, 075381017756, 885503317363
Supports Front Lip Of Shelving.
Material: Epoxy Coated Steel.
Use 1 Bracket Every 36 Inches And At Each End Of Shelf.
Measures Approximately 17.5" Deep; For Use With Closetmaid 12-Inch Deep Shelving Only.
Features
- Includes (12) brackets, (12) anchors and (12) #8 pins
- Measures approximately 17.5 deep; For use with ClosetMaid 12-inch deep shelving only
- Supports front lip of shelving
- Use 1 bracket every 36 inches and at each end of shelf
- Material: Epoxy coated steel
- See more on Amazon...
Brand: ClosetMaid | Manufacturer: ClosetMaid
Dimensions: 17.50 x 17.20 x 12.00 inches | Weight: 0.02 pounds
Warranty: Manufacturer will replace any missing or damaged part due to manufacturer defect for 30 days after purchase. Please have proof of purchase for warranty claims. Combining ClosetMaid branded products with third party components or products will void the ClosetMaid manufacturer’s warranty.
See On Amazon #4
20 Pieces Plastic Shelf Support Peg,Self Adhesive Bracket,Partition Pin for Furniture Kitchen Cabinet Book Shelves Closet Brackets Clapboard Layer
Asin: B0CP36S7RB | Model: LE231128 | PartNumber: LE231128
【Hole Free Design】Adhesive Shelf Bracket Without Nails And Screw. Peel Off The Protective Film On The Back And Stick It On A Smooth Surface.You Don't Need Any Tools To Install Shelf Support Pegs, Which Saves A Lot Of Time..
【Wide Range Of Use】Suitable For A Variety Of Cabinets And Walls,It Can Be With Metal, Glass, Wood, Marble, Ceramic Tiles, Plastic And Other Hard And Smooth Surface Firmly Bonded..
【Easy To Install】Just Make Sure The Surface Is Clean And Flat, Then Peel Off The Protective Coated Film On The Back Of The Strong Partition Bracket Holders And Stick Them On. No Nails, Screws, Or Damaging Walls, Easy To Install..
【Stronger Capacity】High Strength Supports Peg And Better Quality Adhesive, Each Of Shelf Support Peg Can Carry Not Less Than 16 Pounds Of Weight, You Can Use 4Pcs Or More Supports Peg To Support The Same Shelf To Increase The Bearing Capacity..
Features
- Pack of 20 you will get 20pcs adhesive shelf bracket.The quantity is sufficient to meet your daily use and replacement needs
- Stronger capacity high strength supports peg and better quality adhesive, each of shelf support peg can carry not less than 16 pounds of weight, you can use 4pcs or more supports peg to support the same shelf to increase the bearing capacity.
- Hole free design Adhesive Shelf Bracket without nails and screw. Peel off the protective film on the back and stick it on a smooth surface.You don't need any tools to install shelf support pegs, which saves a lot of time.
- Easy to install Just make sure the surface is clean and flat, then peel off the protective coated film on the back of the strong partition bracket holders and stick them on. No nails, screws, or damaging walls, easy to install.
- Wide range of use Suitable for a variety of cabinets and walls,it can be with metal, glass, wood, marble, ceramic tiles, plastic and other hard and smooth surface firmly bonded.
- See more on Amazon...
Brand: LonlyEagle | Manufacturer: LonlyEagle
Dimensions: 1.00 x 4.00 x 4.00 inches
See On Amazon #5
INCREWAY 30 Pack Shelf Support Peg, Clear Plastic Cabinet Shelf Pins, Self-Locking Bracket Clips for Supporting Furniture Kitchen Bookcase Closet Shelf, Fits 16mm Shelves
Asin: B07K51HZX6 | Ean: 0670924480938 | UPC: 670924480938
【For 16Mm Shelf】: The Shelf Holders Fit For 16Mm/0.63Inch Thick Board, And 5Mm/0.2Inch Outer Diameter Of Them. Please Note That Drilled Hole Should Be Slightly Smaller(About 5Mm) Than Its Diameter..
【Wide Application】：No Use For Any Screws, The Clear Furniture Shelf Supporter Are Very Easy To Install By Hand.Just Push Support Pegs In The Drilled Hole, Then You Get A Relaxing Installation Experience.Ideal For Medicine Cabinet, Kitchen Cabinet, Furniture, Wardrobe, Closet, Cupboard, Bookcase, Pantry Shelving, Etc..
【Warm Installation Tips:】：If Your Original Hole Is Larger Than 5Mm, You Can Also Use The Tape We Provided To Wrap Around The Nail To Increase The Diameter Of The Partition Pin.The Thickness Of The Product Itself Is 2Mm, And It Is Necessary To Reserve 2Mm Space At Both Ends Of The Partition Before Installation..
【Self-Locking Design】: Self-Locking Design, Come With Strong Grip And Easy To Install; Stable Triangular Structure Provides Nice Support, Ensuring Greater Bearing Capacity..
Features
- Thick Plastic Made of high quality thicken plastic, invisible and durable. Meet your requirement for both good-looking and last-using.
- Self-locking Design : Self-locking design, come with strong grip and easy to install; Stable triangular structure provides nice support, ensuring greater bearing capacity.
- For 16mm Shelf : The shelf holders fit for 16mm/0.63inch thick board, and 5mm/0.2inch outer diameter of them. Please note that drilled hole should be slightly smaller(about 5mm) than its diameter.
- Warm installation tips: If your original hole is larger than 5mm, you can also use the tape we provided to wrap around the nail to increase the diameter of the partition pin.The thickness of the product itself is 2mm, and it is necessary to reserve 2mm space at both ends of the partition before installation.
- Wide Application No use for any screws, the clear furniture shelf supporter are very easy to install by hand.Just push support pegs in the drilled hole, then you get a relaxing installation experience.Ideal for medicine cabinet, kitchen cabinet, furniture, wardrobe, closet, cupboard, bookcase, pantry shelving, etc.
- See more on Amazon...
Brand: INCREWAY | Manufacturer: INCREWAY
Dimensions: 0.43 x 2.24 x 0.71 inches | Weight: 25.00 Grams
See On Amazon #6
XATDOMESD 12 Pack Adhesive Shelf Bracket,Shelf Support Pegs for Shelves Kitchen Cabinet Book Closet Clapboard Layer
Asin: B09F92ZW2F | Ean: 0797006797958 | UPC: 797006797958
Easy To Install: Self Adhesive Bracket, Free-Hole, No Need Tools Can Be Used To Finish The Installation Work Quickly..
Beautiful And Generous: Made Of Completely Transparent Plastic, Suitable For Various Styles Of Cabinets. When You Need To Change The Design, You Can Take It Off Without Leaving Ugly Holes And Marks In The Cabinet..
Suitable For A Variety Of Cabinets And Walls: It Can Be With Metal, Glass, Wood, Marble, Ceramic Tiles, Plastic And Other Hard And Smooth Surface Firmly Bonded..
Strong Capacity: High Strength Supports Peg And Better Quality Adhesive, Each Of Shelf Support Peg Can Carry Not Less Than 10 Pounds Of Weight, You Can Use 4Pcs Or More Supports Peg To Support The Same Shelf To Increase The Bearing Capacity..
Features
- Hole free design: Adhesive Shelf Bracket without nails and screw. Peel off the protective film on the back and stick it on a smooth surface.You don't need any tools to install shelf support pegs, which saves a lot of time.
- Strong capacity: high strength supports peg and better quality adhesive, each of shelf support peg can carry not less than 10 pounds of weight, you can use 4pcs or more supports peg to support the same shelf to increase the bearing capacity.
- Easy to install: self adhesive bracket, free-hole, no need tools can be used to finish the installation work quickly.
- Suitable for a variety of cabinets and walls: it can be with metal, glass, wood, marble, ceramic tiles, plastic and other hard and smooth surface firmly bonded.
- Beautiful and generous: made of completely transparent plastic, suitable for various styles of cabinets. When you need to change the design, you can take it off without leaving ugly holes and marks in the cabinet.
- See more on Amazon...
Brand: XATDOMESD | Manufacturer: X-AT
See On Amazon #7
ClosetMaid Wire Shelving Support Brackets for 16 in. Deep Shelves, with Anchors & Pins for Installation, White, 12 Count (Pack of 1)
Asin: B00002N5WN | Model: 21776 | PartNumber: 21776 | Ean: 0075381017763 | UPC: 075381017763
Supports Front Lip Of Shelving.
Material: Epoxy Coated Steel.
Use 1 Bracket Every 36 Inches And At Each End Of Shelf.
Measures Approximately 20.5" Deep; For Use With Closetmaid 16-Inch Deep Shelving Only.
Features
- Includes (12) brackets, (12) anchors and (12) #8 pins
- Measures approximately 20.5 deep; For use with ClosetMaid 16-inch deep shelving only
- Supports front lip of shelving
- Use 1 bracket every 36 inches and at each end of shelf
- Material: Epoxy coated steel
- See more on Amazon...
First Available: 07/06/2006
Brand: ClosetMaid | Manufacturer: ClosetMaid
Dimensions: 2.00 x 20.50 x 1.00 inches | Weight: 3.00 Pounds
Warranty: Manufacturer will replace any missing or damaged part due to manufacturer defect for 30 days after purchase. Please have proof of purchase for warranty claims. Combining ClosetMaid branded products with third party components or products will void the ClosetMaid manufacturer’s warranty.
See On Amazon #8
ClosetMaid 2853 ShelfTrack 12-Inch Locking Shelf Bracket, White
Asin: B000FSQ7QS | Model: ClosetMaid - 285300 | PartNumber: ClosetMaid - 285300 | Ean: 0696720201638, 0075381028530 | UPC: 075381028530, 696720201638
Keeps Shelves From Being Pushed Up And Unlocked Accidentally.
Works With All Closetmaid Ventilated Shelving.
Strong And Easy To Install.
Locks The Wire Shelf To The Vertical Wall Standard For Added Safety.
Features
- 12-inch shelf bracket for use with ClosetMaid's 12-inch ShelfTrack system
- Locks the wire shelf to the vertical wall standard for added safety
- Keeps shelves from being pushed up and unlocked accidentally
- Strong and easy to install
- Works with all ClosetMaid ventilated shelving
- See more on Amazon...
First Available: 07/06/2006
Brand: ClosetMaid | Manufacturer: ClosetMaid
Dimensions: 4.00 x 0.50 x 13.00 inches | Weight: 0.00 pounds
Warranty: Free replacement policy.
See On Amazon #9
Knape & Vogt Mfg Co 12' Anoch Shelf Bracket (Pack Of 10 Shelf Standard Bracket
Asin: B002Q0LVUU | Model: KNAPE&VOGT - 180 ANO 12 - 10pk | PartNumber: KNAPE&VOGT - 180 ANO 12 - 10pk | Ean: 0029274005573 | UPC: 029274005573
For Use With Series 80 Standards.
Anochrome Shelf Standard Bracket.
12".
Features
- "KNAPE & VOGT" SHELF STANDARD BRACKET
- 12
- For Use With Series 80 Standards
- Anochrome Shelf Standard Bracket
- See more on Amazon...
Brand: Knape & Vogt | Manufacturer: Knape & Vogt Store
Dimensions: 1.00 x 13.00 x 3.00 inches | Weight: 0.24 pounds
See On Amazon
Looking For Something Else?
Search