Taidacent MAX4466 Dynamic Microphone Pre Amplifier and SSM2167 Microphone Preamplifier Voice Amplifier Compression Voice Processing Module
Asin: B093GTHDBZ | Ean: 0739319143633 | UPC: 739319143633
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Compressing The Dynamic Range Of The Microphone Signal Can Reduce The Level Of The Peak Signal And Increase The Gain For The Low-Level Signal..
Working Voltage: Dc 3V-5V.
Reduce The Noise Floor Of The Microphone Signal And Effectively Improve The Clarity Of The Output Signal..
It Is Suitable For Conference Speech, Intercom Call And Other Occasions..
Features
- It adopts max4466 dynamic microphone amplification + ssm2167 voice compression amplifier design, and the amplification factor is adjustable.
- It is suitable for conference speech, intercom call and other occasions.
- Compressing the dynamic range of the microphone signal can reduce the level of the peak signal and increase the gain for the low-level signal.
- Reduce the noise floor of the microphone signal and effectively improve the clarity of the output signal.
- Working voltage: DC 3v-5v
- See more on Amazon...
Brand: Taidacent | Manufacturer: Taida
See On Amazon Similar To Taidacent MAX4466 Dynamic Microphone Pre
#1
Phenyx Pro Wireless Microphone System, Quad Channel Wireless Mic, w/ 4x40 Channels, 4 Handheld Dynamic Microphones,Auto Scan, Long Distance 328ft, Microphone for Singing, Church, Karaoke (PTU-7000A)
Asin: B07XYV9B5K | Ean: 0609378313455 | UPC: 609378313455
Auto Scan Feature And Anti-Interference Feature: Uhf Wireless Karaoke Microphone System Equips With Auto Scan Function, Which Enables The Karaoke Microphone Wireless To Search For The Least Interference Channel To Pair Up With Transmitters. The Microfono Inalambrico Also Has One 1/4’’ Mixed Output And 4 Xlr Separate Outputs. 4 Antennas Design Increases Anti-Interference Ability And Decreases Interference Between Each Channel..
Devoted Service: Genuine Phenyx Pro Audio Products Come With 12-Month Manufacturer Assurance And Supportive Customer Service. Welcome To Come To Us For Troubleshooting Or Replacement Of Discontinuous/Defective Parts..
Box Contents: 1 Channel Wireless Metal Receiver For Long Range Operation, 4 Uhf Wireless Handheld Microphone, 1/4’’ Audio Cable, 1 Power Adapter, 4 Antennas, 4 Anti-Rolling Rings, 8 Aa Batteries For 16Hrs Long Hour Use, User Manual.
Sturdy Build, Multichannel Multiset Feature: Sturdy Metal Builds For The Wireless Receiver And Dynamic Microphones. The Cordless Microphone Has A Cardioid Dynamic Cartridge For Clear Robust Optimal True Sound. The Multichannel Feature Enables Users To Select Different Frequencies When Preset Frequency Fails For Reliable Performance. In A Total Of 4X40 Channels, Allowing Up To 40 Systems To Be Used At The Same Time. Suitable For Church, Wedding, Karaoke, Dj Gigs, Public Speaking, Etc.
Features
- PREMIUM WIRELESS PERFORMANCE: 4 channel UHF wireless microphone & system with selectable frequency. Channel 1: 538.3 - 550Mhz (40 channels). Channel 2: 554.8 - 566.5MHz. Channel 3: 571.3 - 583MHz. Channel 4: 587.8 - 599.5MHz. Employs hassle-free IR synchronization to pair up the receiver and cordless mics smoothly within seconds, minimum dropouts, and maximum feedback rejection. Long range operation for wireless DJ microphone system of 290ft 328ft line of sight.
- STURDY BUILD, MULTICHANNEL MULTISET FEATURE: Sturdy metal builds for the wireless receiver and dynamic microphones. The cordless microphone has a cardioid dynamic cartridge for clear robust optimal true sound. The multichannel feature enables users to select different frequencies when preset frequency fails for reliable performance. In a total of 4x40 channels, allowing up to 40 systems to be used at the same time. suitable for church, wedding, karaoke, DJ gigs, public speaking, etc
- AUTO SCAN FEATURE AND ANTI-INTERFERENCE FEATURE: UHF wireless karaoke microphone system equips with auto scan function, which enables the karaoke microphone wireless to search for the least interference channel to pair up with transmitters. The microfono inalambrico also has one 1/4 mixed output and 4 XLR separate outputs. 4 antennas design increases anti-interference ability and decreases interference between each channel.
- BOX CONTENTS: 1 channel wireless metal receiver for long range operation, 4 UHF wireless handheld microphone, 1/4 audio cable, 1 power adapter, 4 antennas, 4 anti-rolling rings, 8 AA batteries for 16hrs long hour use, user manual
- DEVOTED SERVICE: Genuine Phenyx Pro audio products come with 12-month manufacturer assurance and supportive customer service. Welcome to come to us for troubleshooting or replacement of discontinuous/defective parts.
- See more on Amazon...
Brand: Phenyx Pro | Manufacturer: Phenyx Technology,LLC
Dimensions: 11.50 x 20.66 x 10.15 inches | Weight: 9.00 pounds
See On Amazon #2
6 Pieces Electret Microphone Amplifier Module MAX4466 Adjustable Gain Blue Breakout Board
Asin: B08N4FNFTR | Model: Weewooday-Microphone Amplifier-01 | PartNumber: Weewooday-Microphone Amplifier-01
20-20Khz Electret Microphone Soldered On: Comes With A 20-20Khz Electret Microphone Soldered On The Board For Audio-Reactive Projects; It Is Recommended To Use The Fft Driver Library, Which Can Take Audio Input And 'Translate' It Into Frequencies.
Power Supply Noise Rejection Function: The Amplifier Has Good Power Supply Noise Rejection.
Easy To Use: Connect Gnd To Ground, Vcc To 2.4-5Vdc; For The Good Performance, Use The 'Quietest' Supply Available (This Would Be The 3.3V Supply).
Parameters: Power Supply Voltage: +2.4V To +5.5V (Can Be Compatible With Stm, Raspberry Pi And Other Development Board Motherboards); Power Supply Rejection Ratio: 112Db; Common Mode Rejection Ratio: 126Db; Avol: 125Db (Rl = 100Kω) Rail-To-Rail Output; Quiescent Power Supply Current: <24Μa; Gain Bandwidth: 600Khz.
Features
- Application: MAX4466 microphone breakout is suitable for voice converters, audio recording and sampling, and audio response projects using FFT; On the back, there is a small trimmer pot to adjust the gain; You can set the gain from 25x to 125x
- Parameters: power supply voltage: +2.4V to +5.5V (can be compatible with STM, Raspberry Pi and other development board motherboards); Power supply rejection ratio: 112dB; Common mode rejection ratio: 126dB; AVOL: 125dB (RL = 100k ) rail-to-rail output; Quiescent power supply current: <24 A; Gain bandwidth: 600kHz
- 20-20KHz electret microphone soldered on: comes with a 20-20KHz electret microphone soldered on the board for audio-reactive projects; It is recommended to use the FFT driver library, which can take audio input and 'translate' it into frequencies
- Easy to use: connect GND to ground, VCC to 2.4-5VDC; For the good performance, use the 'quietest' supply available (this would be the 3.3V supply)
- Power supply noise rejection function: the amplifier has good power supply noise rejection
- See more on Amazon...
Brand: Weewooday | Manufacturer: Weewooday
See On Amazon #3
Weewooday 10 Pieces Electret Microphone Amplifier Adjustable MAX4466 Module Microphone Preamplifier Blue Breakout Board Compatible with Arduino
Asin: B08TTM371D | Model: Weewooday-Size Name-P057 | PartNumber: Weewooday-Size Name-P057
20-20Khz Electret Microphone Soldered On: Comes With A 20-20Khz Electret Microphone Soldered On The Board For Audio-Reactive Projects; It Is Recommended To Use The Fft Driver Library, Which Can Take Audio Input And 'Translate' It Into Frequencies.
Power Supply Noise Rejection Function: The Amplifier Has Good Power Supply Noise Rejection.
Easy To Use: Connect Gnd To Ground, Vcc To 2.4-5Vdc; For The Good Performance, Use The 'Quietest' Supply Available (This Would Be The 3.3V Supply).
Parameters: Power Supply Voltage: +2.4V To +5.5V (Can Be Compatible With Stm, Raspberry Pi And Other Development Board Motherboards); Power Supply Rejection Ratio: 112Db; Common Mode Rejection Ratio: 126Db; Avol: 125Db (Rl = 100 Thousands Of Ohm Meter) Rail-To-Rail Output; Quiescent Power Supply Current: Less Than 24 Microamp; Gain Bandwidth: 600Khz.
Features
- Application: the MAX4466 microphone breakout is suitable for voice converters, audio recording and sampling, and audio response projects using FFT; On the back, there is a small trimmer pot to adjust the gain; You can set the gain from 25x to 125x
- Parameters: power supply voltage: +2.4V to +5.5V (can be compatible with STM, Raspberry Pi and other development board motherboards); Power supply rejection ratio: 112dB; Common mode rejection ratio: 126dB; AVOL: 125dB (RL = 100 thousands of ohm meter) rail-to-rail output; Quiescent power supply current: less than 24 microamp; Gain bandwidth: 600kHz
- 20-20KHz electret microphone soldered on: comes with a 20-20KHz electret microphone soldered on the board for audio-reactive projects; It is recommended to use the FFT driver library, which can take audio input and 'translate' it into frequencies
- Easy to use: connect GND to ground, VCC to 2.4-5VDC; For the good performance, use the 'quietest' supply available (this would be the 3.3V supply)
- Power supply noise rejection function: the amplifier has good power supply noise rejection
- See more on Amazon...
Brand: Weewooday | Manufacturer: Weewooday
See On Amazon #4
HiLetgo 2pcs Electret Microphone Amplifier MAX4466 Module Adjustable Gain Blue Breakout Board for Arduino
Asin: B07DRGF8C2 | Model: 3-01-1491-2pcs | PartNumber: 3-01-1491-2pcs
For The Best Performance, Use The "Quietest" Supply Available (On An For Arduino, This Would Be The 3.3V Supply).
This Breakout Board Is Best Used For Projects Such As Voice Changers, Audio Recordingmpling, And Audio-Reactive Projects That Use Fft.
The Amplifier Has Excellent Power Supply Noise Rejection.
Using The Max4466, An Op-Amp Specifically Designed For Amplifier.
Features
- The board comes with a 20-20KHz electret microphone soldered on
- Using the MAX4466, an op-amp specifically designed for amplifier
- For the best performance, use the quietest supply available (on an for Arduino, this would be the 3.3V supply)
- The amplifier has excellent power supply noise rejection
- This breakout board is best used for projects such as voice changers, audio recordingmpling, and audio-reactive projects that use FFT
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #5
ARCELI 2pcs Electret Microphone Amplifier, GY-MAX4466 Breakout Sensor with Adjustable Gain Control for Arduino
Asin: B07MY293KD | Model: 00364 | PartNumber: 00364 | Ean: 8011678690686
3. Using Is Simple: Connect Gnd To Ground, Vcc To 2.4-5Vdc. For The Best Performance, Use The "Quietest" Supply Available (On An Arduino, This Would Be The 3.3V Supply)..
4.For Audio-Reactive Projects, We Suggest Using An Fft Driver Library Which Can Take The Audio Input And 'Translate' It Into Frequencies..
2. Add An Ear To Your Project With This Well-Designed Which Has Excellent Power Supply Noise Rejection..
Features
- 1. This breakout is best used for projects such as voice changers, audio recording/sampling, and audio-reactive projects that use FFT. On the back, we include a small trimmer pot to adjust the gain. You can set the gain from 25x to 125x.
- 2. Add an ear to your project with this well-designed which has excellent power supply noise rejection.
- 3. Using is simple: connect GND to ground, VCC to 2.4-5VDC. For the best performance, use the quietest supply available (on an Arduino, this would be the 3.3V supply).
- 4.For audio-reactive projects, we suggest using an FFT driver library which can take the audio input and 'translate' it into frequencies.
- See more on Amazon...
Brand: ARCELI | Manufacturer: ARCELI
See On Amazon #6
WWZMDiB 3Pcs GY-MAX4466 Sound Sensor, Electret Microphone Amplifier, Microphone Tunable Amplifier Module
Asin: B0BVH1T8FC | Ean: 0744603649708 | UPC: 744603649708
⚡【Power Supply Rejection Ratio】：112Db.
⚡【Gain Bandwidth】：600Khz.
⚡【Avol】： 125Db (Rl = 100Kω) Rail-To-Rail Output.
⚡【Static Supply Current】：24Μa.
⚡【Common Mode Rejection Ratio】：126Db.
⚡【Supply Voltage】: +2.4V To +5.5V (Can Be Directly Connected To Stm/Ardunio/Raspberry Pi Development Boards).
Features
- MAX4466 Sound Sensor The module contains ferrite on both Vcc and ground leads to minimize power supply noise. If used with an MCU, it is best to use the quietest power supply available in the 2.4V - 5.5V range. On the Arduino, this is typically a 3.3V supply.
- Supply voltage : +2.4V to +5.5V (can be directly connected to STM/ARDUNIO/Raspberry Pi development boards)
- Power supply rejection ratio 112dB
- Common mode rejection ratio 126dB
- AVOL 125dB (RL = 100k ) Rail-to-rail output
- Static supply current 24 A
- Gain bandwidth 600kHz
- See more on Amazon...
Brand: WWZMDiB | Manufacturer: WWZMDiB
See On Amazon #7
Phenyx Pro Professional Wireless Microphone, 561.6MHz UHF Dynamic Microphone, Metal Cordless Microphone, Handheld Microphone Transmitter for PTU-5000/PTU-4000 Series,260ft Coverage
Asin: B07GXGPFWC | Ean: 0609378313066 | UPC: 609378313066
Exceptional Sound Quality: The Microfono Features A High-Quality Dynamic Cartridge Is Specially Engineered To Limit Feedback And Interference, Picking Up Sound Smoothly And Transmitting Sound Hassle-Free. The Wireless Microphone Karaoke Delivers Clear, Robust, Optimal True Sound.
Note: No Battery Included.
Compatibility: The Singing Microphone Only Works With Phenyx Pro Ptu-5000/Ptu-4000 Series Receiver. Both Ptu-5000 And Ptu-4000 Are Fixed Frequency Systems And They Can Work With Up To Four Or Eight Transmitters At Different Freqiencies At The Same Time.
Fixed Frequency: The Wireless Mic Features Fixed Frequency Design For Stable Signal And Interference-Free Performance. Up To 260Ft Operating Distance With Smooth Wireless Transmission.
Features
- METAL CONSTRUCTION, LCD DISPLAY: The microphone wireless has sturdy metal construction with ON/OFF switch at the bottom to avoid turning off the handheld transmitter accidentally. The stage microphone has a large LCD display to show frequency and channel number. LCD display turns red when the battery level is low
- FIXED FREQUENCY: The wireless mic features fixed frequency design for stable signal and interference-free performance. Up to 260ft operating distance with smooth wireless transmission
- EXCEPTIONAL SOUND QUALITY: The microfono features a high-quality dynamic cartridge is specially engineered to limit feedback and interference, picking up sound smoothly and transmitting sound hassle-free. The wireless microphone karaoke delivers clear, robust, optimal true sound
- COMPATIBILITY: The singing microphone ONLY works with Phenyx Pro PTU-5000/PTU-4000 Series receiver. Both PTU-5000 and PTU-4000 are fixed frequency systems and they can work with up to four or eight transmitters at different freqiencies at the same time
- Note: No Battery Included
- See more on Amazon...
Brand: Phenyx Pro | Manufacturer: Phenyx Technology,LLC
See On Amazon #8
NOYITO MAX4466 Electret Microphone Amplifier Adjustable Gain (Pack of 2)
Asin: B07HFSRGSG | Model: NOMAX4466 | PartNumber: NOMAX4466 | Ean: 0680613660978 | UPC: 680613660978
This Breakout Is Best Used For Projects Such As Voice Changers, Audio Recording/Sampling, And Audio-Reactive Projects That Use Fft..
Connect Gnd To Ground, Vcc To 2.4-5Vdc. For The Best Performance, Use The "Quietest" Supply Available (On An Arduino, This Would Be The 3.3V Supply). The Audio Waveform Will Come Out Of The Out Pin. The Output Will Have A Dc Bias Of Vcc/2 So When Its Perfectly Quiet, The Voltage Will Be A Steady Vcc/2 Volts (It Is Dc Coupled)..
On The Back, We Include A Small Trimmer Pot To Adjust The Gain. You Can Set The Gain From 25X To 125X. That's Down To Be About 200Mvpp (For Normal Speaking Volume About 6" Away) Which Is Good For Attaching To Something That Expects 'Line Level' Input Without Clipping, Or Up To About 1Vpp, Ideal For Reading From A Microcontroller Adc. The Output Is Rail-To-Rail So If The Sounds Gets Loud, The Output Can Go Up To 5Vpp!.
For The Amplification, We Use The Max4466, An Op-Amp Specifically Designed For This Delicate Task! The Amplifier Has Excellent Power Supply Noise Rejection, So This Amplifier Sounds Really Good And Isn't Nearly As Noisy Or Scratchy As Other Mic Amp Breakouts We've Tried!.
Features
- Add an ear to your project with this well-designed electret microphone amplifier. This fully assembled and tested board comes with a 20-20KHz electret microphone soldered on.
- For the amplification, we use the MAX4466, an op-amp specifically designed for this delicate task! The amplifier has excellent power supply noise rejection, so this amplifier sounds really good and isn't nearly as noisy or scratchy as other mic amp breakouts we've tried!
- This breakout is best used for projects such as voice changers, audio recording/sampling, and audio-reactive projects that use FFT.
- On the back, we include a small trimmer pot to adjust the gain. You can set the gain from 25x to 125x. That's down to be about 200mVpp (for normal speaking volume about 6 away) which is good for attaching to something that expects 'line level' input without clipping, or up to about 1Vpp, ideal for reading from a microcontroller ADC. The output is rail-to-rail so if the sounds gets loud, the output can go up to 5Vpp!
- Connect GND to ground, VCC to 2.4-5VDC. For the best performance, use the quietest supply available (on an Arduino, this would be the 3.3V supply). The audio waveform will come out of the OUT pin. The output will have a DC bias of VCC/2 so when its perfectly quiet, the voltage will be a steady VCC/2 volts (it is DC coupled).
- See more on Amazon...
Brand: NOYITO | Manufacturer: NOYITO
Dimensions: 0.20 x 0.59 x 0.43 inches | Weight: 0.02 Pounds
Warranty: Manufacturer's One-year After-sale Warranty
See On Amazon #9
Onyehn MAX4466 Electret Microphone Amplifier Module Adjustable Gain for Arduino(Pack of 6pcs)
Asin: B08LD9C7WX | Model: 5 | PartNumber: 5 | Ean: 0783926576551 | UPC: 783926576551
Avol:125Db(Rl = 100Kω)Rail-To-Rail Output.
Size:20.8Mm*13.8Mm*7.5Mm.
Static Supply Current:<24Μα;Gain Bandwidth:600Khz.
Power Supply Rejection Ratio:112Db:Common Mode Rejection Ratio:126Db.
Features
- Power supply voltage:+2.4V to +5.5V
- Power supply rejection ratio:112dB:Common mode rejection ratio:126dB
- AVOL:125dB(RL = 100K )rail-to-rail output
- Static supply current:<24 ;Gain bandwidth:600KHz
- Size:20.8MM*13.8MM*7.5MM
- See more on Amazon...
Brand: Onyehn | Manufacturer: Onyehn
Dimensions: 0.39 x 3.15 x 1.97 Inches
See On Amazon #10
Adafruit Electret Microphone Amplifier - MAX4466 with Adjustable Gain [ADA1063]
Asin: B00K9M6S1O | Model: 1063 | PartNumber: 1063
Ean: 0748347528381, 2050004689693, 3700386510632, 0700598869422, 4060137035715, 0700358509186, 0743724368819
UPC: 700598869422, 743724368819, 748347528381, 700358509186
Excellent Power Supply Noise Rejection.
Fully Assembled And Tested.
Best Used For Projects Such As Voice Changers, Audio Recording/Sampling, And Audio-Reactive Projects That Use Fft.
Features
- Small trimmer pot included to adjust the gain from 25x to 125x
- Best used for projects such as voice changers, audio recording/sampling, and audio-reactive projects that use FFT
- Excellent power supply noise rejection
- Fully assembled and tested
- See more on Amazon...
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 0.38 x 1.88 x 0.63 inches | Weight: 0.04 Pounds
See On Amazon #11
8 Pcs MAX4466 Electret Microphone Amplifier Adjustable Module Microphone Preamplifier Blue Breakout Board
Asin: B09NRF3S5Q | Model: 13-309 | PartNumber: 13-309 | Ean: 0701715510074 | UPC: 701715510074
Easy To Use: Connect Gnd To Ground, Vcc To 2.4-5Vdc, For The Best Performance, Use The "Quietest" Supply Available (This Would Be The 3.3V Supply)..
The Audio Waveform Will Come Out Of The Out Pin. The Output Will Have A Dc Bias Of Vcc/2 So When Its Perfectly Quiet, The Voltage Will Be A Steady Vcc/2 Volts (It Is Dc Coupled). If The Audio Equipment You're Using Requires Ac Coupled Audio, Place A 100Uf Capacitor Between The Output Pin And The Input Of Your Device. If You're Connecting To An Audio Amplifier That Has Differential Inputs Or Includes Decoupling Capacitors, The 100Uf Cap Is Not Required..
If You Want To Connect The Amp Directly To Speakers. If You're Connecting To A Microcontroller Pin, You Don't Need An Amplifier Or Decoupling Capacitor - Connect The Out Pin Directly To The Microcontroller Adc Pin..
Max4466 Tested Board Comes With A 20-20Khz Electret Microphone Soldered, On The Back, There Is A Small Trimmer Pot To Adjust The Gain; You Can Set The Gain From 25X To 125X.
Features
- MAX4466 module power supply voltage: +2.4V to +5.5V (can be compatible with STM, Raspberry Pi and other development board motherboards); Power supply rejection ratio: 112dB; Common mode
- MAX4466 tested board comes with a 20-20KHz electret microphone soldered, on the back, there is a small trimmer pot to adjust the gain; You can set the gain from 25x to 125x
- Easy to use: Connect GND to ground, VCC to 2.4-5VDC, for the best performance, use the quietest supply available (this would be the 3.3V supply).
- If you want to connect the amp directly to speakers. If you're connecting to a microcontroller pin, you don't need an amplifier or decoupling capacitor - connect the OUT pin directly to the microcontroller ADC pin.
- The audio waveform will come out of the OUT pin. The output will have a DC bias of VCC/2 so when its perfectly quiet, the voltage will be a steady VCC/2 volts (it is DC coupled). If the audio equipment you're using requires AC coupled audio, place a 100uF capacitor between the output pin and the input of your device. If you're connecting to an audio amplifier that has differential inputs or includes decoupling capacitors, the 100uF cap is not required.
- See more on Amazon...
Brand: Shutao | Manufacturer: Shutao
See On Amazon #12
6 PCS MAX4466 Electret Microphone Amplifier Module Blue Board Breakout Adjustable Gain Compatible with Arduino
Asin: B09MRTRR56 | Model: SYMKFFDQ | PartNumber: SYMKFFDQ | Ean: 0723497180436 | UPC: 723497180436
Easy To Use:The Board Comes With A 20-20Khz Electret Microphone Soldered On Using The Max4466, An Op-Amp Specifically Designed For Amplifier; For The Best Performance, Use The "Quietest" Supply Available (On An For Arduino, This Would Be The 3.3V Supply);The Amplifier Has Excellent Power Supply Noise Rejection.
This Breakout Board Is Best Used For Projects Such As Voice Changers, Audio Recordingmpling, And Audio-Reactive Or Diy Projects That Use Fft.
Parameters: Power Supply Voltage: +2.4V To +5.5V (Can Be Compatible With Stm, Raspberry Pi And Other Development Board Motherboards); Power Supply Rejection Ratio: 112Db; Common Mode Rejection Ratio: 126Db; Avol: 125Db (Rl = 100Kω) Rail-To-Rail Output; Quiescent Power Supply Current: <24Μa; Gain Bandwidth: 600Khz Size:20.8Mm*13.8Mm*7.5Mm.
This Fully Assembled And Tested Board Comes With A 20-20Khz Electret Microphone Soldered On..
Features
- Application scenarios: cellular phones, repeating sound device, earphones, hearing aids, microphone preamplifiers, portable computers, voice recognition systems, etc.
- This fully assembled and tested board comes with a 20-20KHz electret microphone soldered on.
- Easy to use:The board comes with a 20-20KHz electret microphone soldered on Using the MAX4466, an op-amp specifically designed for amplifier; for the best performance, use the quietest supply available (on an for Arduino, this would be the 3.3V supply);the amplifier has excellent power supply noise rejection
- Parameters: power supply voltage: +2.4V to +5.5V (can be compatible with STM, Raspberry Pi and other development board motherboards); Power supply rejection ratio: 112dB; Common mode rejection ratio: 126dB; AVOL: 125dB (RL = 100k ) rail-to-rail output; Quiescent power supply current: <24 A; Gain bandwidth: 600kHz Size:20.8MM*13.8MM*7.5MM
- This breakout board is best used for projects such as voice changers, audio recordingmpling, and audio-reactive or DIY projects that use FFT
- See more on Amazon...
Brand: SYUAB | Manufacturer: SYUAB
See On Amazon #13
Audix F50S Dynamic Microphone, Cardioid
Asin: B000P5OU1U | Model: F50S | PartNumber: F50S | Ean: 0687471101155 | UPC: 687471101155
Cardioid Pattern For Feedback Resistance.
Durable Zinc Alloy Body With Steel Grill.
Well Balanced, Comfortable To Hold.
Warm, Natural Vocal Sound Optimized For Small To Mid-Size Pa Systems.
Features
- All purpose affordable vocal mic with on-off switch for live sound, home studio
- Warm, natural vocal sound optimized for small to mid-size PA systems
- Cardioid pattern for feedback resistance
- Well balanced, comfortable to hold
- Durable zinc alloy body with steel grill
- See more on Amazon...
First Available: 07/20/2017
Brand: AUDIX | Manufacturer: Audix
Dimensions: 2.00 x 7.00 x 2.00 Inches | Weight: 1.01 pounds
Warranty: All audix branded products purchased in the usa areguaranteed for one year from the date of purchaseto be free of defects in materials and workmanship. In the event of a product failure due to materialsor workmanship, audix will repair or replace saidproduct at no charge. Before returning any productsto audix for service, customers are required to obtaina return authorization (ra) number either by emailor phone. The warranty excludes any causes otherthan manufacturing defects, such as normal wear,abuse, environmental damage, shipping damage, orfailure to use or maintain the product per the suppliedinstructions.
See On Amazon #14
AEDIKO 8pcs MAX4466 Microphone Electret Microphone Amplifier Adjustable MAX4466 Breakout Microphone Amplifier Module
Asin: B09JZBZKCF | Model: 19626 | PartNumber: 19626 | Ean: 0701715485891 | UPC: 701715485891
Easy To Use: Connect Gnd To Ground, Vcc To 2.4-5V Dc; For Good Performance, Use The 'Quietest' Supply Available (This Would Be The 3.3V Supply); On The Back, There Is A Small Trimmer Pot To Adjust The Gain; You Can Set The Gain From 25X To 125X.
Package Contents:You Will Get 8Pcs Max4466 Microphone Electret Microphone Amplifier,Any Problem Please Feel Free To Contact Us,Thank You.
Application: Max4466 Microphone Breakout Is Suitable For Voice Converters, Audio Recording And Sampling, And Audio Response Projects Using Fft,Etc..
20-20Khz Electret Microphone Soldered On:Max4466 Breakout Comes With A 20-20Khz Electret Microphone Soldered On The Board For Audio-Reactive Projects; It Is Recommended To Use The Fft Driver Library, Which Can Take Audio Input And 'Translate' It Into Frequencies.
Features
- MAX4466 Microphone: Power Supply Voltage: +2.4V to +5.5V;Power Supply Rejection Ratio: 112dB; Common Mode Rejection Ratio: 126dB; AVOL: 125dB (RL = 100 Thousands of ohm Meter) Rail-to-Rail Output; Quiescent Power Supply Current: Less than 24amp; Gain Bandwidth: 600kHz
- 20-20KHz Electret Microphone Soldered On:MAX4466 Breakout Comes with a 20-20KHz Electret Microphone Soldered On the Board for Audio-Reactive Projects; It is Recommended to Use the FFT Driver Library, Which Can Take Audio Input and 'Translate' It Into Frequencies
- Easy to Use: Connect GND to Ground, VCC to 2.4-5V DC; For Good Performance, use the 'Quietest' Supply Available (this would be the 3.3V supply); On the Back, there is a Small Trimmer Pot to Adjust the Gain; You Can Set the Gain from 25x to 125x
- Application: MAX4466 Microphone Breakout is Suitable for Voice Converters, Audio Recording and Sampling, and Audio Response Projects using FFT,etc.
- Package Contents:You will get 8pcs MAX4466 Microphone Electret Microphone Amplifier,any problem please feel free to contact us,thank you
- See more on Amazon...
Brand: AEDIKO | Manufacturer: AEDIKO
See On Amazon #15
Coliao 6pcs MAX4466 Electret Microphone Amplifier Module GY-MAX4466 Microphone Amplifier with Adjustable Gain Blue Breakout Board
Asin: B09PD9TQ56 | Ean: 0701715495913 | UPC: 701715495913
【Power Supply Noise Rejection Function】The Amplifier Has Good Power Supply Noise Rejection.
【Easy To Use】 Connect Gnd To Ground, Vcc To 2.4-5Vdc; For The Good Performance, Use The 'Quietest' Supply Available (This Would Be The 3.3V Supply).
【Wide Application】The Max4466 Microphone Breakout Is Fit For Voice Converters, Audio Recording And Sampling, And Audio-Reactive Projects That Use Fft; On The Back, There Is A Small Trimmer Pot To Adjust The Gain; You Can Set The Gain From 25X To 125X.
【Electret Microphone Sealing-In】Comes With A 20-20Khz Electret Microphone On The Board For Audio-Reactive Projects; It Is Recommended To Use The Fft Driver Library, Which Can Take Audio Input And 'Translate' It Into Frequencies.
Features
- Microphone Parameters Power supply voltage: +2.4V to +5.5V (compatible with STM and other development board motherboards); Power supply rejection ratio: 112dB; Common mode rejection ratio: 126dB; AVOL: 125dB (RL = 100 thousands of ohm meter) rail-to-rail output; Quiescent power supply current: less than 24 microamp; Gain bandwidth: 600kHz
- Electret Microphone Sealing-in Comes with a 20-20KHz electret microphone on the board for audio-reactive projects; It is recommended to use the FFT driver library, which can take audio input and 'translate' it into frequencies
- Power supply noise rejection function The amplifier has good power supply noise rejection
- Wide Application The MAX4466 microphone breakout is fit for voice converters, audio recording and sampling, and audio-reactive projects that use FFT; On the back, there is a small trimmer pot to adjust the gain; You can set the gain from 25x to 125x
- Easy to Use Connect GND to ground, VCC to 2.4-5VDC; For the good performance, use the 'quietest' supply available (this would be the 3.3V supply)
- See more on Amazon...
Brand: Coliao | Manufacturer: Coliao
See On Amazon #16
Electret Microphone Amplifier MAX4466 with Adjustable Gain for Arduino
Asin: B07Y26KSZM | Model: TG051 | PartNumber: TG051 | Ean: 0682601104549 | UPC: 682601104549
This Breakout Is Best Used For Projects Such As Voice Changers, Audio Recordingmpling, And Audio-Reactive Projects That Use Fft. On The Back, We Include A Small Trimmer Pot To Adjust The Gain..
The Output Pin Is Not Designed To Drive Speakers Or Anything But The Smallest In-Ear Headphones.
Using It Is Simple: Connect Gnd To Ground, Vcc To 2.4-5Vdc..
This Fully Assembled And Tested Board Comes With A 20-20Khz Electret Microphone Soldered On..
Features
- Add an ear to your project with this well-designed electret microphone amplifier.
- This fully assembled and tested board comes with a 20-20KHz electret microphone soldered on.
- This breakout is best used for projects such as voice changers, audio recordingmpling, and audio-reactive projects that use FFT. On the back, we include a small trimmer pot to adjust the gain.
- Using it is simple: connect GND to ground, VCC to 2.4-5VDC.
- The output pin is not designed to drive speakers or anything but the smallest in-ear headphones
- See more on Amazon...
Brand: Gump's grocery | Manufacturer: Gump's grocery
See On Amazon #17
Audix F50 Dynamic Microphone, Cardioid
Asin: B001MTVQ4M | Model: F50 | PartNumber: F50 | Ean: 0641125195969, 0687471101148 | UPC: 687471101148, 641125195969
Cardioid Pattern For Feedback Resistance.
Durable Zinc Alloy Body With Steel Grill.
Well Balanced, Comfortable To Hold.
Warm, Natural Vocal Sound Optimized For Small To Mid-Size Pa Systems.
Features
- All purpose affordable vocal mic for live sound, home studio
- Warm, natural vocal sound optimized for small to mid-size PA systems
- Cardioid pattern for feedback resistance
- Well balanced, comfortable to hold
- Durable zinc alloy body with steel grill
- See more on Amazon...
First Available: 07/20/2017
Brand: AUDIX | Manufacturer: Audix
Dimensions: 2.00 x 7.00 x 2.00 inches | Weight: 0.70 Pounds
Warranty: All audix branded products purchased in the usa areguaranteed for one year from the date of purchaseto be free of defects in materials and workmanship. In the event of a product failure due to materialsor workmanship, audix will repair or replace saidproduct at no charge. Before returning any productsto audix for service, customers are required to obtaina return authorization (ra) number either by emailor phone. The warranty excludes any causes otherthan manufacturing defects, such as normal wear,abuse, environmental damage, shipping damage, orfailure to use or maintain the product per the suppliedinstructions.
See On Amazon #18
Electret Microphone Amplifier Adjustable MAX4466 Module Microphone Preamplifier Blue Breakout Board Compatible with Arduino 2PCS
Asin: B0CGD6T241 | Model: D-001 | PartNumber: D-001 | Ean: 0733805324087 | UPC: 733805324087
Common Mode Rejection Ratio: 126Db; Avol: 125Db (Rl = 100 Thousands Of Ohm Meter) Rail-To-Rail Output; Quiescent Power Supply Current: Less Than 24 Microamp; Gain Bandwidth: 600Khz.
20-20Khz Electret Microphone Soldered On: Comes With A 20-20Khz Electret Microphone Soldered On The Board For Audio-Reactive Projects; It Is Recommended To Use The Fft Driver Library, Which Can Take Audio Input And 'Translate' It Into Frequencies.
20-20Khz Electret Microphone Soldered On: Comes With A 20-20Khz Electret Microphone Soldered On The Board For Audio-Reactive Projects; It Is Recommended To Use The Fft Driver Library, Which Can Take Audio Input And 'Translate' It Into Frequencies.
Parameters: Power Supply Voltage: +2.4V To +5.5V (Can Be Compatible With Stm, Raspberry Pi And Other Development Board Motherboards); Power Supply Rejection Ratio: 112Db;.
Features
- Application: the MAX4466 microphone breakout is suitable for voice converters, audio recording and sampling, and audio response projects using FFT; On the back, there is a small trimmer pot to adjust the gain; You can set the gain from 25x to 125x
- Parameters: power supply voltage: +2.4V to +5.5V (can be compatible with STM, Raspberry Pi and other development board motherboards); Power supply rejection ratio: 112dB;
- Common mode rejection ratio: 126dB; AVOL: 125dB (RL = 100 thousands of ohm meter) rail-to-rail output; Quiescent power supply current: less than 24 microamp; Gain bandwidth: 600kHz
- 20-20KHz electret microphone soldered on: comes with a 20-20KHz electret microphone soldered on the board for audio-reactive projects; It is recommended to use the FFT driver library, which can take audio input and 'translate' it into frequencies
- 20-20KHz electret microphone soldered on: comes with a 20-20KHz electret microphone soldered on the board for audio-reactive projects; It is recommended to use the FFT driver library, which can take audio input and 'translate' it into frequencies
- See more on Amazon...
Brand: DUTTY | Manufacturer: DUTTY
See On Amazon #19
DEVMO GY-MAX4466 Electret Microphone Adjustable Amplifier MAX4466 Module Breakout Sensor Adjustable Gain Control Compatible with Ar-duino
Asin: B07T39YVDB | Ean: 0796753378342 | UPC: 796753378342
★The Output Pin Is Not Designed To Drive Speakers Or Anything But The Smallest In-Ear Headphones- You'll Need An Audio Amplifier (Such As 3.7W Stereo Amp) If You Want To Connect The Amp Directly To Speakers. If You're Connecting To A Microcontroller Pin, You Don't Need An Amplifier Or Decoupling Capacitor - Connect The Out Pin Directly To The Microcontroller Adc Pin..
★Gy-Max4466 Max4466 Electret Microphone Amplifier Module Adjustable Gain Out Gnd Vcc Amplifier Board 2.4-5V Dc For Ar-Duino.
★For Audio-Reactive Projects, We Suggest Using An Fft Driver Library Which Can Take The Audio Input And 'Translate' It Into Frequencies..
★The Audio Waveform Will Come Out Of The Out Pin. The Output Will Have A Dc Bias Of Vcc/2 So When Its Perfectly Quiet, The Voltage Will Be A Steady Vcc/2 Volts (It Is Dc Coupled). If The Audio Equipment You're Using Requires Ac Coupled Audio, Place A 100Uf Capacitor Between The Output Pin And The Input Of Your Device. If You're Connecting To An Audio Amplifier That Has Differential Inputs Or Includes Decoupling Capacitors, The 100Uf Cap Is Not Required..
Features
- Connect GND to ground, VCC to 2.4-5VDC. For the best performance, use the "quietest" supply available (on an for Ar-duino, this would be the 3.3V supply).
- The audio waveform will come out of the OUT pin. The output will have a DC bias of VCC/2 so when its perfectly quiet, the voltage will be a steady VCC/2 volts (it is DC coupled). If the audio equipment you're using requires AC coupled audio, place a 100uF capacitor between the output pin and the input of your device. If you're connecting to an audio amplifier that has differential inputs or includes decoupling capacitors, the 100uF cap is not required.
- The output pin is not designed to drive speakers or anything but the smallest in-ear headphones- you'll need an audio amplifier (such as 3.7W stereo amp) if you want to connect the amp directly to speakers. If you're connecting to a microcontroller pin, you don't need an amplifier or decoupling capacitor - connect the OUT pin directly to the microcontroller ADC pin.
- For audio-reactive projects, we suggest using an FFT driver library which can take the audio input and 'translate' it into frequencies.
- GY-MAX4466 MAX4466 Electret Microphone Amplifier Module Adjustable Gain OUT GND VCC Amplifier Board 2.4-5V DC For Ar-duino
- See more on Amazon...
Brand: DEVMO | Manufacturer: DEVMO
See On Amazon #20
Taidacent 10PCS 4015-36DB Noise Cancellation Microphone Waterproof Headset Headphone MIC Electret Condenser Microphone
Asin: B09BMV8YP7 | Model: 10PCS | PartNumber: 10PCS | Ean: 0739319148447 | UPC: 739319148447
Ip67 Grade Waterproof, Can Be Soaked In Rain, Not Suitable For Deep Soaking.
Sensitivity -36Db, Suitable For Long-Distance Sound Pickup, Speakers, Outdoor Cameras And Other Products.
Features
- 4015 noise reduction microphone head, size: 4*1.5mm, spot with 100MM twisted pair cable, 2PIN1.25 pitch terminal cable
- Sensitivity -36DB, suitable for long-distance sound pickup, speakers, outdoor cameras and other products
- IP67 grade waterproof, can be soaked in rain, not suitable for deep soaking
- See more on Amazon...
Brand: Taidacent | Manufacturer: Taidacent
Weight: 0.44 Pounds
See On Amazon
Looking For Something Else?
Search