uxcell Standard Plastic Square Aluminum Extrusion End Cap Black 45x45mm 40pcs
Asin: B094HB419T | Model: a21031200ux0543 | PartNumber: a21031200ux0543
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Material And Feature: Tubing Post End Caps Are Made Of Abs Material, Featuring Durable Construction And Nice Gliding Edges, Not Subject To Rust Or Corrosion.
Simply Press In By Hand Then Pin Into The Center Bore With A Small Hammer Or Plastic Mallet.
The Cap Made Of Plastic, No Rust, Better Protection For The Aluminum Bar End, Widely Used In The Climbing Platform, Fish Tank Rack, Storage Rack, Shade House, Trolley, And So On.
Package Content: 40Pcs X Aluminum Profile End Cap, For 4545 Eu Standard Aluminum Profile.
Features
- Size: 45*45mm( L*W); Mounting Hold Diameter: D10.5; Material: ABS
- Package Content: 40pcs x Aluminum Profile End Cap, for 4545 EU Standard Aluminum Profile
- Material and feature: tubing post end caps are made of ABS material, featuring durable construction and nice gliding edges, not subject to rust or corrosion
- The cap made of plastic, No rust, better protection for the aluminum bar end, widely used in the climbing platform, fish tank rack, storage rack, shade house, trolley, and so on
- Simply press in by hand then pin into the center bore with a small hammer or plastic mallet
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon Similar To uxcell Standard Plastic Square Aluminum
#1
uxcell M6 x 1.0 Spiral Point Threading Tap, H2 Tolerance High Speed Steel TICN Coated, Round Shank with Square End, Metric Screw Taps Tapping Bit for Machinist Thread Repair, 2pcs
Asin: B08J6QZRF8 | Model: a20010400ux0056 | PartNumber: a20010400ux0056
Applications: Thread Taps Are Great For Through-Hole Threads. Can Be Used For Drilling And Tapping Stainless Steel, Aluminum, Alloy Steel, Ordinary Steel, Cast Iron, Non-Ferrous Metals, Hard Plastics, Etc. Flutes On The Screw Tap Help To Remove Chips And Debris From The Hole..
Warm Tips: Machine Taps Are Suggested To Be Used With Tap Chucks With Overload Protection. It Is Not Recommended For Hand Use And Electric Drill Tapping. Micro Taps (Such As M1-M3.5) Are Mainly Used For Clocks, Watches, Low-Hardness Woods, And Soft Metals..
How To Use: Suitable For Drill Presses, Tapping Machines, Cnc And Milling Machines. Used With Tapping Oil To Get Higher Quality Threads And More Durable Taps. The Point Of The Tap Helps Guide It Into The Hole And Reduces The Torque Required To Turn It..
Material & Finish: 6542 High Speed Steel Metric Taps Run At High Speeds And Generate Threads Quickly And Efficiently, Offering High Hardness (Hrc62-64), Wear Resistance, And Good Toughness. Ticn Coating For Improving Wear Resistance, Hardness, Heat Resistance, Lubricity..
Features
- Spiral Point Tap: M6 x 1.0 thread with H2 tolerance, JIS standard, right hand thread cutting. Straight flutes taps provide provide downward chip removal, with clear threads and sharp cutting edges.
- Material & Finish: 6542 high speed steel metric taps run at high speeds and generate threads quickly and efficiently, offering high hardness (HRC62-64), wear resistance, and good toughness. TICN coating for improving wear resistance, hardness, heat resistance, lubricity.
- Applications: Thread taps are great for through-hole threads. Can be used for drilling and tapping stainless steel, aluminum, alloy steel, ordinary steel, cast iron, non-ferrous metals, hard plastics, etc. Flutes on the screw tap help to remove chips and debris from the hole.
- How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps. The point of the tap helps guide it into the hole and reduces the torque required to turn it.
- Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping. Micro taps (such as M1-M3.5) are mainly used for clocks, watches, low-hardness woods, and soft metals.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #2
uxcell 10pcs Round Steel Metal Rods, 3mm x 100mm High Speed Steel (HSS) Lathe Bar Stock Tool, for Shaft Gear Drill Lathes Boring Machine Turning Miniature DIY Craft, 10pcs
Asin: B07KY8GK5W | Model: a18102400ux0350 | PartNumber: a18102400ux0350
Versatile Steel Rods: Suitable For Processing Top Circle, End Face, Bore, Thread, Plane, Step, Groove. Suitable For Copper, Aluminum, Unhardened Steel Items.
Meet Your Needs: Steel Rods Can Be Easy To Cut And Formed Into Replacement Parts For Almost Anything. You Can Cut To Any Size You Want According To Your Needs.
Use Note: Please Add Some Oil During Storage And Reduce Contact With Air Or Do Not Expose To Air For Rust Protection. The Surface Is Smooth, Easy To Shape, No Cracks Formed.
General Purpose: Widely Used For Processing Milling Cutters, Sharp Knives, Gravers, Punch Press Needles, Bearings Sleeve Rods Of Machine Tools, High Hard Ejector Rods And Center Pins.
Features
- Round Metal Rods: Diameter: 3mm / 0.12"; length: 100mm / 3.93". High-speed steel rod is with combination of hardness and toughness for wear resistance, hardness HRC61~63
- General Purpose: Widely used for processing milling cutters, sharp knives, gravers, punch press needles, bearings sleeve rods of machine tools, high hard ejector rods and center pins
- Versatile Steel Rods: Suitable for processing top circle, end face, bore, thread, plane, step, groove. Suitable for copper, aluminum, unhardened steel items
- Use Note: Please add some oil during storage and reduce contact with air or do not expose to air for rust protection. The surface is smooth, easy to shape, no cracks formed
- Meet Your Needs: Steel Rods can be easy to cut and formed into replacement parts for almost anything. You can cut to any size you want according to your needs
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 3.94 x 1.18 inches
See On Amazon #3
uxcell Standard Plastic Square Aluminum Extrusion End Cap Black 40x40mm 20pcs
Asin: B094HB1GW9 | Model: a21031200ux0539 | PartNumber: a21031200ux0539
Material And Feature: Tubing Post End Caps Are Made Of Abs Material, Featuring Durable Construction And Nice Gliding Edges, Not Subject To Rust Or Corrosion.
Simply Press In By Hand Then Pin Into The Center Bore With A Small Hammer Or Plastic Mallet.
The Cap Made Of Plastic, No Rust, Better Protection For The Aluminum Bar End, Widely Used In The Climbing Platform, Fish Tank Rack, Storage Rack, Shade House, Trolley, And So On.
Package Content: 20Pcs X Aluminum Profile End Cap, For 4040 Eu Standard Aluminum Profile.
Features
- Size: 40*40mm( L*W); Mounting Hold Diameter: D7; Material: ABS
- Package Content: 20pcs x Aluminum Profile End Cap, for 4040 EU Standard Aluminum Profile
- Material and feature: tubing post end caps are made of ABS material, featuring durable construction and nice gliding edges, not subject to rust or corrosion
- The cap made of plastic, No rust, better protection for the aluminum bar end, widely used in the climbing platform, fish tank rack, storage rack, shade house, trolley, and so on
- Simply press in by hand then pin into the center bore with a small hammer or plastic mallet
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #4
uxcell M6 x 1mm Metric Left Hand Tap and Die Set, Machine Thread Screw Tap with Round Threading Die, Tap & Die Kit for Nut Screw Bolt Thread Repair
Asin: B098XW1RB9 | Model: a21031100ux0274 | PartNumber: a21031100ux0274
Features: High Speed Steel Straight Flute Tap Provides Rapid Downward Chip Removal For Efficient Threading, With Combination Of Hardness And Toughness For Wear Resistance. Alloy Tool Steel Die Is With Conical Locking Hole, Strong Locking, Not Loose, Hardness, High Torque, Good Toughness And Wear Resistance..
Tips: Used With Tapping Oil Can Get Higher Quality Threads And Make Taps And Dies More Durable. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of Dies And Taps When Tapping. It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Die Chip Hole..
Easy To Use: Round Dies Can Be Used With Die Wrench (Not Included). The Fastening Screw In The Middle Of The Wrench Should Be Inserted Into The Slot Of The Die And Tightened. Machine Taps Are Used On Drill Presses, Tapping Machines, Cnc And Milling Machines..
Applications: The Round Die Can Process, Correct Or Clean The External Threads. The Thread Tap Is Suitable For Processing Through Hole Or Shallow Hole Female Threads. Suitable For Tapping Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic In Maintenance And Repair Work..
Features
- Tap & Die Set: M6 x 1 metric tap and die set can make new threads or re-thread damaged or jammed threads, good for general purpose applications. Clear threads without burrs, left hand (reverse) tapping direction.
- Applications: The round die can process, correct or clean the external threads. The thread tap is suitable for processing through hole or shallow hole female threads. Suitable for tapping stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic in maintenance and repair work.
- Features: High speed steel straight flute tap provides rapid downward chip removal for efficient threading, with combination of hardness and toughness for wear resistance. Alloy tool steel die is with conical locking hole, strong locking, not loose, hardness, high torque, good toughness and wear resistance.
- Easy to Use: Round dies can be used with die wrench (not included). The fastening screw in the middle of the wrench should be inserted into the slot of the die and tightened. Machine taps are used on drill presses, tapping machines, CNC and milling machines.
- Tips: Used with tapping oil can get higher quality threads and make taps and dies more durable. Suitable lubricating oil should be added to the cutting edge of dies and taps when tapping. It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the die chip hole.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #5
uxcell 5 Pairs Metric Hand Threading Tap Set M3 Thread 0.5mm Pitch Taper & Plug Milling Taps Straight Flutes High Speed Steel
Asin: B07WHWBTLJ | Model: a19070800ux0124 | PartNumber: a19070800ux0124
Easy To Use: Hand Tapping, Mainly Used With Tap Wrenches. Standard Thread Milling Taps Are Used To Thread Through Holes Or Shallow And Blind Holes..
Tips: Add Appropriate Tapping Oil For Higher Quality Internal Threads And More Durable Taps. Without Any Additional Coatings, Good For General Purpose Applications..
Features: Straight Flute Design, Downward Chip Removal. High Speed Steel Tool Is High Hardness, High Strength, Good Toughness, And Wear Resistance..
Applications: The Hand Threading Tap Kit Is Used To Re-Thread Damaged Or Jammed Threads. Suitable For Threading Mild Steels, Aluminum, Iron, Copper, Hard Plastic..
Features
- Metric Taps: M3 x 0.5 metric taps set. Taper style: starts the thread square with the workpiece. Plug style: generally used in through holes.
- Applications: The hand threading tap kit is used to re-thread damaged or jammed threads. Suitable for threading mild steels, aluminum, iron, copper, hard plastic.
- Easy to Use: Hand tapping, mainly used with tap wrenches. Standard thread milling taps are used to thread through holes or shallow and blind holes.
- Features: Straight flute design, downward chip removal. High speed steel tool is high hardness, high strength, good toughness, and wear resistance.
- Tips: Add appropriate tapping oil for higher quality internal threads and more durable taps. Without any additional coatings, good for general purpose applications.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #6
uxcell M7 x 0.75mm Metric Tap and Die Set, Machine Thread Screw Tap with Round Threading Die, Tap & Die Kit for Nut Screw Bolt Thread Repair
Asin: B098K4J5FK | Model: a21020200ux0296 | PartNumber: a21020200ux0296
Features: High Speed Steel Straight Flute Tap Provides Rapid Downward Chip Removal For Efficient Threading, With Combination Of Hardness And Toughness For Wear Resistance. Alloy Tool Steel Die Is With Conical Locking Hole, Strong Locking, Not Loose, Hardness, High Torque, Good Toughness And Wear Resistance..
Tips: Used With Tapping Oil Can Get Higher Quality Threads And Make Taps And Dies More Durable. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of Dies And Taps When Tapping. It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Die Chip Hole..
Easy To Use: Round Dies Can Be Used With Die Wrench (Not Included). The Fastening Screw In The Middle Of The Wrench Should Be Inserted Into The Slot Of The Die And Tightened. Machine Taps Are Used On Drill Presses, Tapping Machines, Cnc And Milling Machines..
Applications: The Round Die Can Process, Correct Or Clean The External Threads. The Thread Tap Is Suitable For Processing Through Hole Or Shallow Hole Female Threads. Suitable For Tapping Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic In Maintenance And Repair Work..
Features
- Tap & Die Set: M7 x 0.75 metric tap and die set can make new threads or re-thread damaged or jammed threads, good for general purpose applications. Clear threads without burrs, right hand tapping direction.
- Applications: The round die can process, correct or clean the external threads. The thread tap is suitable for processing through hole or shallow hole female threads. Suitable for tapping stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic in maintenance and repair work.
- Features: High speed steel straight flute tap provides rapid downward chip removal for efficient threading, with combination of hardness and toughness for wear resistance. Alloy tool steel die is with conical locking hole, strong locking, not loose, hardness, high torque, good toughness and wear resistance.
- Easy to Use: Round dies can be used with die wrench (not included). The fastening screw in the middle of the wrench should be inserted into the slot of the die and tightened. Machine taps are used on drill presses, tapping machines, CNC and milling machines.
- Tips: Used with tapping oil can get higher quality threads and make taps and dies more durable. Suitable lubricating oil should be added to the cutting edge of dies and taps when tapping. It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the die chip hole.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #7
uxcell Chucking Reamer 3/8", H7 HSS Lathe Machine Reamer 6 Straight Flutes, Round Shank Milling Cutting Tool, Reaming Drill Bit for Stainless Steel Metal Hole
Asin: B07JNSQS6Y | Model: a18091400ux0318 | PartNumber: a18091400ux0318
Straight Flute Reamer: Allows Chips And Debris To Escape Easily From The Hole, Well Suited For Most Applications In Shallow Cuts. Can Achieve The Required Roundness, Straightness, And Concentricity Of The Hole..
Uncoated Reamer Drill Bit: Features Just The Base Substrate Without Any Additional Coatings, Used On A Wide Range Of Materials, Including Aluminum, Brass, Copper, Mild Steel, Plastics And Composites. Tapping Fluid Or Cutting Oil Can Be Used To Lubricate The Reamer And Workpiece To Help Reduce Friction And Increase Tool Life..
Machine Reamer: Used In Drilling Machines, Milling Machines, Lathes, And Machining Centers. Can Be Used With A Wide Variety Of Tool Holding Systems. Reamers Are Used For Light Cut, Repair Work, Removing Stock Or Simply For Enlarging Holes..
Wide Applications: The Chucking Reamer Is Designed For Accurate Enlarging, Smoothing Or Finishing Holes In Stainless Steel, Cast Iron, Aluminum, Plastic, Wood, And Other Non-Ferrous Metals, Widely Used In Various Parts Of Machinery Such As Gears, Bearings, Bushings, Etc...
Features
- Specifications: Cutting Dia.: 3/8"; Tool flute length: 23.2mm / 0.91"; Overall length: 105mm / 4.13". High-speed steel reamers provide durability, high hardness, good toughness, wear resistance, high temperature resistance, the ability to maintain sharpness over time.
- Wide Applications: The chucking reamer is designed for accurate enlarging, smoothing or finishing holes in stainless steel, cast iron, aluminum, plastic, wood, and other non-ferrous metals, widely used in various parts of machinery such as gears, bearings, bushings, etc..
- Straight Flute Reamer: Allows chips and debris to escape easily from the hole, well suited for most applications in shallow cuts. Can achieve the required roundness, straightness, and concentricity of the hole.
- Machine Reamer: Used in drilling machines, milling machines, lathes, and machining centers. Can be used with a wide variety of tool holding systems. Reamers are used for light cut, repair work, removing stock or simply for enlarging holes.
- Uncoated Reamer Drill Bit: Features just the base substrate without any additional coatings, used on a wide range of materials, including aluminum, brass, copper, mild steel, plastics and composites. Tapping fluid or cutting oil can be used to lubricate the reamer and workpiece to help reduce friction and increase tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 3.94 x 0.39 inches
See On Amazon #8
uxcell M9 x 1mm Metric Tap and Die Set, Machine Thread Screw Tap with Round Threading Die, Tap & Die Kit for Nut Screw Bolt Thread Repair
Asin: B0983B81MK | Model: a21020200ux0303 | PartNumber: a21020200ux0303
Features: High Speed Steel Straight Flute Tap Provides Rapid Downward Chip Removal For Efficient Threading, With Combination Of Hardness And Toughness For Wear Resistance. Alloy Tool Steel Die Is With Conical Locking Hole, Strong Locking, Not Loose, Hardness, High Torque, Good Toughness And Wear Resistance..
Tips: Used With Tapping Oil Can Get Higher Quality Threads And Make Taps And Dies More Durable. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of Dies And Taps When Tapping. It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Die Chip Hole..
Easy To Use: Round Dies Can Be Used With Die Wrench (Not Included). The Fastening Screw In The Middle Of The Wrench Should Be Inserted Into The Slot Of The Die And Tightened. Machine Taps Are Used On Drill Presses, Tapping Machines, Cnc And Milling Machines..
Applications: The Round Die Can Process, Correct Or Clean The External Threads. The Thread Tap Is Suitable For Processing Through Hole Or Shallow Hole Female Threads. Suitable For Tapping Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic In Maintenance And Repair Work..
Features
- Tap & Die Set: M9 x 1 metric tap and die set can make new threads or re-thread damaged or jammed threads, good for general purpose applications. Clear threads without burrs, right hand tapping direction. Tap Size: thread length: 22mm / 0.87"; overall length: 72mm / 2.83"; square shank: 5.5mm / 0.22"; Die Size: outside diameter (OD): 25mm / 0.98"; thickness: 9mm / 0.35"
- Applications: The round die can process, correct or clean the external threads. The thread tap is suitable for processing through hole or shallow hole female threads. Suitable for tapping stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic in maintenance and repair work.
- Features: High speed steel straight flute tap provides rapid downward chip removal for efficient threading, with combination of hardness and toughness for wear resistance. Alloy tool steel die is with conical locking hole, strong locking, not loose, hardness, high torque, good toughness and wear resistance.
- Easy to Use: Round dies can be used with die wrench (not included). The fastening screw in the middle of the wrench should be inserted into the slot of the die and tightened. Machine taps are used on drill presses, tapping machines, CNC and milling machines.
- Tips: Used with tapping oil can get higher quality threads and make taps and dies more durable. Suitable lubricating oil should be added to the cutting edge of dies and taps when tapping. It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the die chip hole.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #9
uxcell M16 x 2mm Metric Tap and Die Set, Machine Thread Screw Tap with Round Threading Die, Tap & Die Kit for Nut Screw Bolt Thread Repair
Asin: B0983C8221 | Model: a21020200ux0330 | PartNumber: a21020200ux0330
Features: High Speed Steel Straight Flute Tap Provides Rapid Downward Chip Removal For Efficient Threading, With Combination Of Hardness And Toughness For Wear Resistance. Alloy Tool Steel Die Is With Conical Locking Hole, Strong Locking, Not Loose, Hardness, High Torque, Good Toughness And Wear Resistance..
Tips: Used With Tapping Oil Can Get Higher Quality Threads And Make Taps And Dies More Durable. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of Dies And Taps When Tapping. It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Die Chip Hole..
Easy To Use: Round Dies Can Be Used With Die Wrench (Not Included). The Fastening Screw In The Middle Of The Wrench Should Be Inserted Into The Slot Of The Die And Tightened. Machine Taps Are Used On Drill Presses, Tapping Machines, Cnc And Milling Machines..
Applications: The Round Die Can Process, Correct Or Clean The External Threads. The Thread Tap Is Suitable For Processing Through Hole Or Shallow Hole Female Threads. Suitable For Tapping Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic In Maintenance And Repair Work..
Features
- Tap & Die Set: M16 x 2 metric tap and die set can make new threads or re-thread damaged or jammed threads, good for general purpose applications. Clear threads without burrs, right hand tapping direction. Tap Size: thread length: 33mm / 1.3"; overall length: 102mm / 4.02"; square shank: 10mm / 0.39"; Die Size: outside diameter (OD): 38mm / 1.5"; thickness: 14mm / 0.55"
- Applications: The round die can process, correct or clean the external threads. The thread tap is suitable for processing through hole or shallow hole female threads. Suitable for tapping stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic in maintenance and repair work.
- Features: High speed steel straight flute tap provides rapid downward chip removal for efficient threading, with combination of hardness and toughness for wear resistance. Alloy tool steel die is with conical locking hole, strong locking, not loose, hardness, high torque, good toughness and wear resistance.
- Easy to Use: Round dies can be used with die wrench (not included). The fastening screw in the middle of the wrench should be inserted into the slot of the die and tightened. Machine taps are used on drill presses, tapping machines, CNC and milling machines.
- Tips: Used with tapping oil can get higher quality threads and make taps and dies more durable. Suitable lubricating oil should be added to the cutting edge of dies and taps when tapping. It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the die chip hole.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #10
uxcell M11 x 1mm Metric Tap and Die Set, Machine Thread Screw Tap with Round Threading Die, Tap & Die Kit for Nut Screw Bolt Thread Repair
Asin: B0983D22V1 | Model: a21020200ux0312 | PartNumber: a21020200ux0312
Features: High Speed Steel Straight Flute Tap Provides Rapid Downward Chip Removal For Efficient Threading, With Combination Of Hardness And Toughness For Wear Resistance. Alloy Tool Steel Die Is With Conical Locking Hole, Strong Locking, Not Loose, Hardness, High Torque, Good Toughness And Wear Resistance..
Tips: Used With Tapping Oil Can Get Higher Quality Threads And Make Taps And Dies More Durable. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of Dies And Taps When Tapping. It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Die Chip Hole..
Easy To Use: Round Dies Can Be Used With Die Wrench (Not Included). The Fastening Screw In The Middle Of The Wrench Should Be Inserted Into The Slot Of The Die And Tightened. Machine Taps Are Used On Drill Presses, Tapping Machines, Cnc And Milling Machines..
Applications: The Round Die Can Process, Correct Or Clean The External Threads. The Thread Tap Is Suitable For Processing Through Hole Or Shallow Hole Female Threads. Suitable For Tapping Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic In Maintenance And Repair Work..
Features
- Tap & Die Set: M11 x 1 metric tap and die set can make new threads or re-thread damaged or jammed threads, good for general purpose applications. Clear threads without burrs, right hand tapping direction.
- Applications: The round die can process, correct or clean the external threads. The thread tap is suitable for processing through hole or shallow hole female threads. Suitable for tapping stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic in maintenance and repair work.
- Features: High speed steel straight flute tap provides rapid downward chip removal for efficient threading, with combination of hardness and toughness for wear resistance. Alloy tool steel die is with conical locking hole, strong locking, not loose, hardness, high torque, good toughness and wear resistance.
- Easy to Use: Round dies can be used with die wrench (not included). The fastening screw in the middle of the wrench should be inserted into the slot of the die and tightened. Machine taps are used on drill presses, tapping machines, CNC and milling machines.
- Tips: Used with tapping oil can get higher quality threads and make taps and dies more durable. Suitable lubricating oil should be added to the cutting edge of dies and taps when tapping. It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the die chip hole.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #11
uxcell Standard Plastic Square Aluminum Extrusion End Cap Black 40x40mm 5pcs
Asin: B094HC54RX | Model: a21031200ux0538 | PartNumber: a21031200ux0538
Material And Feature: Tubing Post End Caps Are Made Of Abs Material, Featuring Durable Construction And Nice Gliding Edges, Not Subject To Rust Or Corrosion.
Simply Press In By Hand Then Pin Into The Center Bore With A Small Hammer Or Plastic Mallet.
The Cap Made Of Plastic, No Rust, Better Protection For The Aluminum Bar End, Widely Used In The Climbing Platform, Fish Tank Rack, Storage Rack, Shade House, Trolley, And So On.
Package Content: 5Pcs X Aluminum Profile End Cap, For 4040 Eu Standard Aluminum Profile.
Features
- Size: 40*40mm( L*W); Mounting Hold Diameter: D7; Material: ABS
- Package Content: 5pcs x Aluminum Profile End Cap, for 4040 EU Standard Aluminum Profile
- Material and feature: tubing post end caps are made of ABS material, featuring durable construction and nice gliding edges, not subject to rust or corrosion
- The cap made of plastic, No rust, better protection for the aluminum bar end, widely used in the climbing platform, fish tank rack, storage rack, shade house, trolley, and so on
- Simply press in by hand then pin into the center bore with a small hammer or plastic mallet
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #12
uxcell Back Mount Pressure Gauge, 0-180 Psi 0-12 Bar, 0-1200 Kpa, 1-25/32" Dial Display, 1/4 NPT Male for Air Compressor Water Oil Gas
Asin: B07L2VMY3L | Model: a18110700ux0131 | PartNumber: a18110700ux0131
1-25/32" Dial Display - The Circular Dial Comes In 1.8" Diameters. The Dial Has An Aluminum Black Pointer.The Lens Is Polycarbonate For High Impact Resistance.
Widely Application - General Purpose Gauge For Plumbing, Heating, Air Conditioning, Pneumatic, Hydraulic, Water Tanks And Air Compressors.Suitable For Non-Clogging And Non-Corroding Media.
Center Back Mount - The Male Connection Is Mounted On The Center Back Of The Gauge And Has 1/4 Npt.
Range : 0-180Psi，0-12Kg/Cm2，0-12Bar，0-1200Kpa.
Features
- PRESSURE GAUGE - Pressure gauge with brass wetted parts has a circular dial enclosed in a steel case and a male connection, and measures pressure with a dual scale (psi/kPa).The brass wetted parts are for measuring non-corrosive liquid and gas pressure
- Range : 0-180psi 0-12kg/cm2 0-12bar 0-1200kpa
- 1-25/32 DIAL DISPLAY - The circular dial comes in 1.8 diameters. The dial has an aluminum black pointer.The lens is polycarbonate for high impact resistance
- CENTER BACK MOUNT - The male connection is mounted on the center back of the gauge and has 1/4 NPT
- WIDELY APPLICATION - General purpose gauge for plumbing, heating, air conditioning, pneumatic, hydraulic, water tanks and air compressors.Suitable for non-clogging and non-corroding media
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 2.36 x 1.97 x 1.97 Inches
See On Amazon #13
uxcell 5 Pairs Metric Hand Threading Tap Set M4 Thread 0.7mm Pitch Taper & Plug Milling Taps Straight Flutes High Speed Steel
Asin: B07WJYP6JK | Model: a19070800ux0134 | PartNumber: a19070800ux0134
Easy To Use: Hand Tapping, Mainly Used With Tap Wrenches. Standard Thread Milling Taps Are Used To Thread Through Holes Or Shallow And Blind Holes..
Tips: Add Appropriate Tapping Oil For Higher Quality Internal Threads And More Durable Taps. Without Any Additional Coatings, Good For General Purpose Applications..
Features: Straight Flute Design, Downward Chip Removal. High Speed Steel Tool Is High Hardness, High Strength, Good Toughness, And Wear Resistance..
Applications: The Hand Threading Tap Kit Is Used To Re-Thread Damaged Or Jammed Threads. Suitable For Threading Mild Steels, Aluminum, Iron, Copper, Hard Plastic..
Features
- Metric Taps: M4 x 0.7 metric taps set. Taper style: starts the thread square with the workpiece. Plug style: generally used in through holes.
- Applications: The hand threading tap kit is used to re-thread damaged or jammed threads. Suitable for threading mild steels, aluminum, iron, copper, hard plastic.
- Easy to Use: Hand tapping, mainly used with tap wrenches. Standard thread milling taps are used to thread through holes or shallow and blind holes.
- Features: Straight flute design, downward chip removal. High speed steel tool is high hardness, high strength, good toughness, and wear resistance.
- Tips: Add appropriate tapping oil for higher quality internal threads and more durable taps. Without any additional coatings, good for general purpose applications.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #14
uxcell M12 x 1.75mm Metric Tap and Die Set, Machine Thread Screw Tap with Round Threading Die, Tap & Die Kit for Nut Screw Bolt Thread Repair
Asin: B0983CCLSL | Model: a21020200ux0314 | PartNumber: a21020200ux0314
Features: High Speed Steel Straight Flute Tap Provides Rapid Downward Chip Removal For Efficient Threading, With Combination Of Hardness And Toughness For Wear Resistance. Alloy Tool Steel Die Is With Conical Locking Hole, Strong Locking, Not Loose, Hardness, High Torque, Good Toughness And Wear Resistance..
Tips: Used With Tapping Oil Can Get Higher Quality Threads And Make Taps And Dies More Durable. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of Dies And Taps When Tapping. It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Die Chip Hole..
Easy To Use: Round Dies Can Be Used With Die Wrench (Not Included). The Fastening Screw In The Middle Of The Wrench Should Be Inserted Into The Slot Of The Die And Tightened. Machine Taps Are Used On Drill Presses, Tapping Machines, Cnc And Milling Machines..
Applications: The Round Die Can Process, Correct Or Clean The External Threads. The Thread Tap Is Suitable For Processing Through Hole Or Shallow Hole Female Threads. Suitable For Tapping Stainless Steel, Aluminum Alloy, Cast Iron, Copper, Iron, Aluminum, Plastic In Maintenance And Repair Work..
Features
- Tap & Die Set: M12 x 1.75 metric tap and die set can make new threads or re-thread damaged or jammed threads, good for general purpose applications. Clear threads without burrs, right hand tapping direction.
- Applications: The round die can process, correct or clean the external threads. The thread tap is suitable for processing through hole or shallow hole female threads. Suitable for tapping stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic in maintenance and repair work.
- Features: High speed steel straight flute tap provides rapid downward chip removal for efficient threading, with combination of hardness and toughness for wear resistance. Alloy tool steel die is with conical locking hole, strong locking, not loose, hardness, high torque, good toughness and wear resistance.
- Easy to Use: Round dies can be used with die wrench (not included). The fastening screw in the middle of the wrench should be inserted into the slot of the die and tightened. Machine taps are used on drill presses, tapping machines, CNC and milling machines.
- Tips: Used with tapping oil can get higher quality threads and make taps and dies more durable. Suitable lubricating oil should be added to the cutting edge of dies and taps when tapping. It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the die chip hole.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #15
uxcell 10Pcs 0.6mm Carbide End Mill Engraving Milling Cutter CNC Router Bits for PCB Machine, 1/8" Shank
Asin: B07R9K4ZP7 | Model: a19031400ux0481 | PartNumber: a19031400ux0481
Features: High Hardness, High Wear Resistance, High Strength. Have Sufficient Bending Strength And Wear Resistance..
Application: Can Engrave Pcb, Cnc, Circuit Boards, Metal, Plastics, Wood, Smt, Fiber Glass, Carbon Board. Combined With The Material To Be Processed, Select An Appropriate Feed Rate And Cutting Speed To Improve The Tool Life..
Characteristics: Sharp Cutting Edge, Milling, Hole And Plate Edge, Surface Clean, Neat, No Glitches. The Longer The Length Of The Tool Clamped By The Chuck, The Better..
Material: Use Of Ultra-Fine Grain Carbide Material With Good Milling And Cutting Performance, Ensure High Work Efficiency..
Features
- STANDARD: Cutting edge diameter: 0.6mm / 0.024"; Shank diameter: 3.175mm / 1/8"; Cutting edge length: 5mm / 0.2"
- MATERIAL: Use of ultra-fine grain carbide material with good milling and cutting performance, ensure high work efficiency.
- FEATURES: High hardness, high wear resistance, high strength. Have sufficient bending strength and wear resistance.
- CHARACTERISTICS: Sharp cutting edge, milling, hole and plate edge, surface clean, neat, no glitches. The longer the length of the tool clamped by the chuck, the better.
- APPLICATION: Can engrave PCB, CNC, Circuit boards, Metal, Plastics, Wood, SMT, Fiber glass, Carbon board. Combined with the material to be processed, select an appropriate feed rate and cutting speed to improve the tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.04 x 1.50 x 0.12 inches
See On Amazon #16
uxcell Standard Plastic Square Aluminum Extrusion End Cap Black 30x30mm 20pcs
Asin: B094HC4TZ4 | Model: a21031200ux0536 | PartNumber: a21031200ux0536
Material And Feature: Tubing Post End Caps Are Made Of Abs Material, Featuring Durable Construction And Nice Gliding Edges, Not Subject To Rust Or Corrosion.
Simply Press In By Hand Then Pin Into The Center Bore With A Small Hammer Or Plastic Mallet.
The Cap Made Of Plastic, No Rust, Better Protection For The Aluminum Bar End, Widely Used In The Climbing Platform, Fish Tank Rack, Storage Rack, Shade House, Trolley, And So On.
Package Content: 20Pcs X Aluminum Profile End Cap, For 3030 Eu Standard Aluminum Profile.
Features
- Size: 30*30mm( L*W); Mounting Hold Diameter: D7.2; Material: ABS
- Package Content: 20pcs x Aluminum Profile End Cap, for 3030 EU Standard Aluminum Profile
- Material and feature: tubing post end caps are made of ABS material, featuring durable construction and nice gliding edges, not subject to rust or corrosion
- The cap made of plastic, No rust, better protection for the aluminum bar end, widely used in the climbing platform, fish tank rack, storage rack, shade house, trolley, and so on
- Simply press in by hand then pin into the center bore with a small hammer or plastic mallet
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #17
uxcell 5/8 Inch Cutting Dia 4 Flutes Straight Shank HSS-AL End Mill Router Bit 2pcs
Asin: B01M26U9YM | Model: a16061300ux0444 | PartNumber: a16061300ux0444 | Ean: 0709874240023 | UPC: 709874240023
Cutting Depth: 45Mm / 1.8"; Product Name: End Mill.
Weight: 249G; Color: Silver Tone.
Package Content: 2Pcs X End Mill, 2Pcs X Plastic Case; Material: Hss-Al.
Flutes: 4-Flute; Overall Length: 96Mm / 3.8".
Features
- Shank Diameter: 5/8"; Cutting Diameter: 5/8"
- Flutes: 4-Flute; Overall Length: 96mm / 3.8
- Cutting Depth: 45mm / 1.8; Product Name: End Mill
- Package Content: 2pcs x End Mill, 2pcs x Plastic Case; Material: HSS-AL
- Weight: 249g; Color: Silver Tone
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #18
uxcell Square Aluminum Flat Bar, 3pcs 1/8" Thickness 4" Width 12" Length Square Aluminum Bar 6061 Aluminum Flat Plate, 3 x 100 x 305mm T6511 Solid New Mill Stock
Asin: B0CKPNDK12
Design: A Square Aluminum Flat Bar Provides A Clean And Polished Look. With Its Precise Dimensions And Smooth Edges, It Can Be Easily Integrated Into Any Construction Or Industrial Project..
Application: The Aluminum Flat Square Rod Is Widely Used In Construction, Automobile, Electronics, Furniture And Handmade Craft Production Projects. It Is Commonly Used For Framework Structures, Support Beams, Braces, Trim Pieces, And Decorative Elements.
Usage: The Square Aluminum Bar Is Widely Used And Easy To Use. Can Be Cut, Drilled, Welded, Or Formed According To Specific Requirements. Its Lightweight Nature And Manageable Size Make It Convenient For Diy Enthusiasts And Professional Craftsmen..
Material: Made Of 6061 Aluminum Alloy, The Square Aluminum Bar Has Good Strength And Durability. Its Anode Surface Finish Enhances Corrosion Resistance, Making It A Good Choice For A Variety Of Applications In Different Environments..
Features
- Total Size: 3 x 100 x 305mm / 1/8" x 4" x 12"(Thickness*Width*Length); Package Content: 3pcs x Square Aluminum Flat Bars
- Material: Made of 6061 aluminum alloy, the square aluminum bar has good strength and durability. Its anode surface finish enhances corrosion resistance, making it a good choice for a variety of applications in different environments.
- Design: A square aluminum flat bar provides a clean and polished look. With its precise dimensions and smooth edges, it can be easily integrated into any construction or industrial project.
- Usage: The square aluminum bar is widely used and easy to use. Can be cut, drilled, welded, or formed according to specific requirements. Its lightweight nature and manageable size make it convenient for DIY enthusiasts and professional craftsmen.
- Application: The aluminum flat square rod is widely used in construction, automobile, electronics, furniture and handmade craft production projects. It is commonly used for framework structures, support beams, braces, trim pieces, and decorative elements
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #19
uxcell M8 x 1.25 Spiral Point Threading Tap, H2 Tolerance High Speed Steel TICN Coated, Round Shank with Square End, DIN371/376, Metric Screw Taps Tapping Bit for Thread Repair, 2pcs
Asin: B08J6B9BJV | Model: a20010400ux0040 | PartNumber: a20010400ux0040
Applications: Thread Taps Are Great For Through-Hole Threads. Can Be Used For Drilling And Tapping Stainless Steel, Aluminum, Alloy Steel, Ordinary Steel, Cast Iron, Non-Ferrous Metals, Hard Plastics, Etc. Flutes On The Screw Tap Help To Remove Chips And Debris From The Hole..
Warm Tips: Machine Taps Are Suggested To Be Used With Tap Chucks With Overload Protection. It Is Not Recommended For Hand Use And Electric Drill Tapping. Micro Taps (Such As M1-M3.5) Are Mainly Used For Clocks, Watches, Low-Hardness Woods, And Soft Metals..
How To Use: Suitable For Drill Presses, Tapping Machines, Cnc And Milling Machines. Used With Tapping Oil To Get Higher Quality Threads And More Durable Taps. The Point Of The Tap Helps Guide It Into The Hole And Reduces The Torque Required To Turn It..
Material & Finish: 6542 High Speed Steel Metric Taps Run At High Speeds And Generate Threads Quickly And Efficiently, Offering High Hardness (Hrc62-64), Wear Resistance, And Good Toughness. Ticn Coating For Improving Wear Resistance, Hardness, Heat Resistance, Lubricity..
Features
- Spiral Point Tap: M8 x 1.25 thread with H2 tolerance, DIN371/376 standard, right hand thread cutting. Straight flutes taps provide provide downward chip removal, with clear threads and sharp cutting edges.
- Material & Finish: 6542 high speed steel metric taps run at high speeds and generate threads quickly and efficiently, offering high hardness (HRC62-64), wear resistance, and good toughness. TICN coating for improving wear resistance, hardness, heat resistance, lubricity.
- Applications: Thread taps are great for through-hole threads. Can be used for drilling and tapping stainless steel, aluminum, alloy steel, ordinary steel, cast iron, non-ferrous metals, hard plastics, etc. Flutes on the screw tap help to remove chips and debris from the hole.
- How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps. The point of the tap helps guide it into the hole and reduces the torque required to turn it.
- Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping. Micro taps (such as M1-M3.5) are mainly used for clocks, watches, low-hardness woods, and soft metals.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #20
uxcell M2 x 0.4 Spiral Point Threading Tap, H2 Tolerance High Speed Steel TICN Coated, Round Shank with Square End, DIN371/376, Metric Screw Taps Tapping Bit for Thread Repair, 2pcs
Asin: B08J6G4Q2L | Model: a20010400ux0028 | PartNumber: a20010400ux0028
Applications: Thread Taps Are Great For Through-Hole Threads. Can Be Used For Drilling And Tapping Stainless Steel, Aluminum, Alloy Steel, Ordinary Steel, Cast Iron, Non-Ferrous Metals, Hard Plastics, Etc. Flutes On The Screw Tap Help To Remove Chips And Debris From The Hole..
Warm Tips: Machine Taps Are Suggested To Be Used With Tap Chucks With Overload Protection. It Is Not Recommended For Hand Use And Electric Drill Tapping. Micro Taps (Such As M1-M3.5) Are Mainly Used For Clocks, Watches, Low-Hardness Woods, And Soft Metals..
How To Use: Suitable For Drill Presses, Tapping Machines, Cnc And Milling Machines. Used With Tapping Oil To Get Higher Quality Threads And More Durable Taps. The Point Of The Tap Helps Guide It Into The Hole And Reduces The Torque Required To Turn It..
Material & Finish: 6542 High Speed Steel Metric Taps Run At High Speeds And Generate Threads Quickly And Efficiently, Offering High Hardness (Hrc62-64), Wear Resistance, And Good Toughness. Ticn Coating For Improving Wear Resistance, Hardness, Heat Resistance, Lubricity..
Features
- Spiral Point Tap: M2 x 0.4 thread with H2 tolerance, DIN371/376 standard, right hand thread cutting. Straight flutes taps provide provide downward chip removal, with clear threads and sharp cutting edges.
- Material & Finish: 6542 high speed steel metric taps run at high speeds and generate threads quickly and efficiently, offering high hardness (HRC62-64), wear resistance, and good toughness. TICN coating for improving wear resistance, hardness, heat resistance, lubricity.
- Applications: Thread taps are great for through-hole threads. Can be used for drilling and tapping stainless steel, aluminum, alloy steel, ordinary steel, cast iron, non-ferrous metals, hard plastics, etc. Flutes on the screw tap help to remove chips and debris from the hole.
- How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps. The point of the tap helps guide it into the hole and reduces the torque required to turn it.
- Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping. Micro taps (such as M1-M3.5) are mainly used for clocks, watches, low-hardness woods, and soft metals.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon
Looking For Something Else?
Search