Aopin Water Level Sensor Switch Stainless Steel,Liquid Level Sensor Float Switch, Plastic Ball Float Controller For Water Pump Fish Tank Cistern Sump Filter Aquarium Swim Pool Garden Pond Liquid 1 Pcs
Asin: B095HRQV5Z | Ean: 0658099128107 | UPC: 658099128107
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.★High Quality Materials★: The Liquid Level Switch Is Made Of High Quality Stainless Steel As A Whole, Seamless Laser Welding, No Burrs, Compact & Durable. High Temperature Resistance. Stainless Steel Even Can Work At Temperatures Up To 248˚F(120°C). The Maximum Pressure Resistance Of The Stainless Steel Float Can Reach 30Kg/Cm2. Contacts Are Plated With Rhodium, Its Life Span Can Reach 2 Million Times. Switch Liquid Controller Can Be Installed Above Or On Side Of The Liquid Level As Required..
★Diy Can Be Adjusted★: Normally Closed (Nc) And Normally Open (No) Can Be Adjusted Manually, You Need To Use A Vise To Pull Down The Circlip Under The Float Switch, Then Adjust The Direction Of The Float To Realize The Conversion Between "Nc" And "No". The Normal State Is "Nc". The Liquid With High Viscosity, Generally Should Choose A Larger Outer Diameter Float. If You Want To Control A Large Liquid Range, You Can Use 2 Different Length Combinations, Or Buy A Double Float Level Switch..
★High Sensitivity★: Our Ring Magnet Inside The Float Accurately Controls The On And Off Of The Reed Switch. Sealing Gasket Can Prevent Water From Leaking From The Mounting Hole. High Temperature Resistant Wire Copper Plated With Silver, Surface Braided Layer Insulation, High Temperature Resistant, Prevent Oxidation, Greatly Extending The Service Life. Connection Part Adopts Waterproof Solid Glue, Which Has Better Waterproof Performance And Good Sealing Effectand To Protect The Safety Of Users!.
★Application★: Liquid Level Sensor Is A Device Used To Sense The Liquid Level In The Storage Tank. This Product Can Be Used For Liquid Level Sensing, Alarm, Signal Transmission In Water Dispensers, Water Purifiers, Water Heaters, Coffee Machines, Small Refrigerators And Other Home Appliances. Specially Used For Fish Tanks, Water Pumps, Cooling Barrel, Ponds, Agricultural Equipment, Cistern Alarm, Sump Filter Aquarium Swim Pool, Garden, Well, Water Towers And Other Fields..
Features
- Specification : Max Switching Current : 0.5 A ; Max Breakdown Voltage : 220V ; Max Carry Current : 1.0 A ; Max Pressure: 100 PSI / 248 F (120 C) ; Wire Length : 300mm ; M10 Metric Thread. Model: ZS10010:.
- Application : Liquid level sensor is a device used to sense the liquid level in the storage tank. This product can be used for liquid level sensing, alarm, signal transmission in water dispensers, water purifiers, water heaters, coffee machines, small refrigerators and other home appliances. Specially used for fish tanks, water pumps, cooling barrel, ponds, agricultural equipment, cistern alarm, sump filter aquarium swim pool, garden, well, water towers and other fields.
- HIGH QUALITY MATERIALS : The liquid level switch is made of high quality stainless steel as a whole, seamless laser welding, no burrs, compact & durable. High temperature resistance. Stainless steel even can work at temperatures up to 248 F(120 C). The maximum pressure resistance of the stainless steel float can reach 30kg/cm2. Contacts are plated with rhodium, its life span can reach 2 million times. Switch liquid controller can be installed above or on side of the liquid level as required.
- HIGH SENSITIVITY : Our ring magnet inside the float accurately controls the on and off of the reed switch. Sealing gasket can prevent water from leaking from the mounting hole. High temperature resistant wire copper plated with silver, surface braided layer insulation, high temperature resistant, prevent oxidation, greatly extending the service life. Connection part adopts waterproof solid glue, which has better waterproof performance and good sealing effectand to protect the safety of users!
- DIY CAN BE ADJUSTED : Normally Closed (NC) and Normally Open (NO) can be adjusted manually, you need to use a vise to pull down the circlip under the float switch, Then adjust the direction of the float to realize the conversion between NC and NO. The normal state is NC. The liquid with high viscosity, generally should choose a larger outer diameter Float. If you want to control a large liquid range, you can use 2 different length combinations, or buy a double float level switch.
- See more on Amazon...
Brand: Aopin | Manufacturer: Aopin-Hardware
See On Amazon Similar To Aopin Water Level Sensor Switch
#1
SS2 Float Switch 3/4 inch L Shape This Water Float Switch is a Versatile and Reliable Device That can be Used in Various HVAC Applications and Around The House for DIY. ECWB
Asin: B0CC13TTY2 | Model: ss2 | PartNumber: ss2
With Its Advanced Technology And Precise Design, The Ss2 Style Float Switch Offers Exceptional Performance And Peace Of Mind. Whether You Are Using It For Industrial Or Residential Applications, This Float Switch Is Engineered To Withstand Even The Harshest Conditions And Deliver Reliable Results..
Trust The Ss2 Style Float Switch To Keep Your System Protected And Running Smoothly, Providing You With A Worry-Free And Restful Sleep..
We Recommend That The Switch/Cap Assembly Be Removed And Cleaned Every Three Months..
Its Superior Quality Ensures That Your System Is Always Secure, Allowing You To Rest Easy Knowing That Your Equipment Is In Good Hands..
Sleep Soundly Knowing That Your System Is Safeguarded With A High-Quality Ss2 Style Float Switch. This Reliable And Durable Device Provides Excellent Protection For Your System, Ensuring That It Operates Smoothly And Efficiently..
Features
- SS2 condensate overflow shut off sensor NEW SS2. It detects clogged air conditioning condensate drains and shuts off the system to prevent the overflowing water damage to floors, walls and ceilings.This is easy to install with a standard 3/4 adaptor, the removable cap is easy for cleaning. When there is no water overflowing, the floater stays on the bottom of the switch, Equipment will stop running when float is raised. Every Home Must Have!
- Sleep soundly knowing that your system is safeguarded with a high-quality SS2 style float switch. This reliable and durable device provides excellent protection for your system, ensuring that it operates smoothly and efficiently.
- With its advanced technology and precise design, the SS2 style float switch offers exceptional performance and peace of mind. Whether you are using it for industrial or residential applications, this float switch is engineered to withstand even the harshest conditions and deliver reliable results.
- Its superior quality ensures that your system is always secure, allowing you to rest easy knowing that your equipment is in good hands.
- Trust the SS2 style float switch to keep your system protected and running smoothly, providing you with a worry-free and restful sleep.
- We recommend that the switch/cap assembly be removed and cleaned every three months.
- See more on Amazon...
Brand: Generic | Manufacturer: Universal Components
Dimensions: 8.25 x 5.50 x 1.75 inches
See On Amazon #2
HydroCheck HC6000v2 Sump Pump Float Switch: Hi-Lo Sensors, Built-in Alarms | Versatile, No Cleaning & No Moving Parts,Prevents Flooding in Basements, Pools, and More! Proudly Made in USA
Asin: B006AU4L4U | Model: HC6000 | PartNumber: HC6000 | Ean: 0891138000143 | UPC: 891138000143
Alerts For Peace Of Mind: Enjoy Unparalleled Peace Of Mind With The Built-In Alarms Of The Hc6000v2. These Alarms Promptly Notify You Of Potential Issues, Including Pump Failure, High Water Levels, Blocked Discharge Pipes, Weak Grounding, And More. Customize Your Alarms Using The Smart Button, Allowing You To Mute Or Silence Them Individually..
Proven Endurance, Trusted Performance: Crafted In The Usa And Supported By A Dedicated Customer Service Team, The Hc6000v2 Boasts A Remarkable Track Record Of Durability. With More Than 1 Million Cycles Tested, This Technology Has Garnered The Trust Of Industry Professionals For Over Two Decades..
Maintenance-Free & Robust: Thanks To The Hydrocheck Sensor Installation Kit, The Sensors Remain Unaffected By Minerals Or Debris In The Water. No Cleaning Required. The Electronic Control Module Eliminates Moving Parts Prone To Seizing Or Failing, Ensuring Exceptional Reliability..
Universal Compatibility: The Hc6000v2 Is The Ultimate Solution For All Sump Pump Systems (< 15 Amps). Its Versatility And Straightforward Installation Make It An Ideal Replacement For Any Existing Float Switch. Say Goodbye To Pump Compatibility Issues, Especially In Narrow Or Congested Pits.
Features
- ENHANCE PUMP EFFICIENCY: Maximize your sump pump's performance with the HydroCheck HC6000v2's innovative Hi-Lo dual-sensor system. This design ensures longer, efficient pump cycles, reducing wear and tear while cutting down energy consumption, potentially saving on your electric bill.
- UNIVERSAL COMPATIBILITY: The HC6000v2 is the ultimate solution for all sump pump systems (< 15 Amps). Its versatility and straightforward installation make it an ideal replacement for any existing float switch. Say goodbye to pump compatibility issues, especially in narrow or congested pits
- ALERTS FOR PEACE OF MIND: Enjoy unparalleled peace of mind with the built-in alarms of the HC6000v2. These alarms promptly notify you of potential issues, including pump failure, high water levels, blocked discharge pipes, weak grounding, and more. Customize your alarms using the Smart Button, allowing you to mute or silence them individually.
- MAINTENANCE-FREE & ROBUST: Thanks to the HydroCheck Sensor Installation Kit, the sensors remain unaffected by minerals or debris in the water. No cleaning required. The electronic control module eliminates moving parts prone to seizing or failing, ensuring exceptional reliability.
- PROVEN ENDURANCE, TRUSTED PERFORMANCE: Crafted in the USA and supported by a dedicated customer service team, the HC6000v2 boasts a remarkable track record of durability. With more than 1 million cycles tested, this technology has garnered the trust of industry professionals for over two decades.
- See more on Amazon...
Brand: HydroCheck | Manufacturer: STAK Enterprises, Inc.
Dimensions: 2.50 x 2.75 x 3.75 Inches | Weight: 0.88 Pounds
See On Amazon #3
Roamoris AC 110V~120V Sump Pump Switch Control Automatic Water Level Controller Spply and Drain Mode with 6.5ft Detector Sensor, Liquid Level Switch Relay ,Electric Solenoid Valve,Ball Valve,Pump WC01
Asin: B0C1XDNJCC | Model: WC01 | PartNumber: WC01
【110V-120V】You Can Choose The 110V Solenoid Valve, Electric Ball Valve, Water Pump To Use With The Controller.The Load Current Of The Controller Is 20A..
【Application】This Controller Can Help You Realize The Automatic Water Supply And Drainage Of Fish Ponds, Reservoirs, Swimming Pools, And Water Tanks..
【Noitce】Before Installation, Please Make Sure You Have Electrical Knowledge. If You Have Questions About Product Use, Please Contact Us. We Will Reply You Within 24 Hours..
【Stainless Steel Detector With 6.5Ft Wires】Corrosion, No Rust, Suitable For Long-Time Use..
【Water Supply And Drain Mode】Open Is Water Supply Mode.Close Is Drain Mode. Electric Ball Valve And Electric Solenoid Valve Just Can Be Used For Water Supply Mode. Pump Can Be Used For Water Supply Or Drain Mode..
Features
- Easy to use Only one screwdriver is needed to quickly install the power cable and detector cable on the water level controller.
- Water Supply and Drain Mode Open is Water Supply Mode.Close is Drain Mode. Electric ball valve and electric solenoid valve just can be used for water supply mode. Pump can be used for water supply or drain mode.
- 110V-120V You can choose the 110v solenoid valve, electric ball valve, water pump to use with the controller.The load current of the controller is 20A.
- Stainless Steel Detector with 6.5ft Wires Corrosion, no rust, suitable for long-time use.
- Application This controller can help you realize the automatic water supply and drainage of fish ponds, reservoirs, swimming pools, and water tanks.
- Noitce Before installation, please make sure you have electrical knowledge. If you have questions about product use, please contact us. We will reply you within 24 hours.
- See more on Amazon...
Brand: Roamoris | Manufacturer: Roamoris
Dimensions: 2.40 x 3.20 x 1.70 inches
See On Amazon #4
Anndason 6 Pieces Plastic PP Float Switch Fish Tank Liquid Water Level Sensor,Model: DP5200
Asin: B072QCHQ2P | Model: 43237-2 | PartNumber: 43237-2 | Ean: 0723610128178 | UPC: 723610128178
Max Switching Current : 0.5A;Max Breakdown Voltage : 220V Dc;Max Carry Current : 1.0A;Max Contact Resistance : 100M Ohm.
Cable Length : 39Cm / 15.3"；Switch Body Size : 65 X 22Mm / 2.6" X0.87" Thread Dia(Approx) : 16Mm / 0.63".
Temperature Rating : -10 / +85 Celsuis;Float Ball Material : P.P;Float Body Material : P.P.
Model No. : Dp5200;Max Contact Rating : 10W.
Features
- Package Content : 6 x Water Level Sensor ;Color :Light blue and yellow
- Model No. : DP5200;Max Contact Rating : 10W
- Max Switching Current : 0.5A;Max Breakdown Voltage : 220V DC;Max Carry Current : 1.0A;Max Contact Resistance : 100m ohm
- Temperature Rating : -10 / +85 Celsuis;Float Ball Material : P.P;Float Body Material : P.P
- Cable Length : 39cm / 15.3 Switch Body Size : 65 x 22mm / 2.6 x0.87 Thread Dia(Approx) : 16mm / 0.63
- See more on Amazon...
Brand: Anndason | Manufacturer: Anndason
Weight: 0.16 pounds
See On Amazon #5
WaterBoss Sump Pump Float Switch - Universal Water Level Sensor with 10-Ft Tether and Piggyback Plug for Grinder, Septic Pump and Sewage - Honeywell Microswitch Rated for 1M Cycles, IP68 Waterproof
Asin: B01BEHQVEQ | Model: SA-3100-3-RAW | PartNumber: SA-3100-3-RAW | Ean: 7241870795020, 0784672970693 | UPC: 784672970693
10-Foot Cable Float Switch For Water Tanks And Light To Medium Amounts Of Suspended Solids Is Fully Adjustable. The Float Reacts To Liquid Levels, Shutting Off The Pump To Prevent The Motor Burning Up..
Quick, Easy Installation And Reliable, Frustration-Free Water Sensor Monitoring Make Waterboss The Ultimate Water Tank Float Switch. It Comes With A 5-Year Warranty For Your Peace Of Mind..
Ruggedly Built With Non-Corrosive Polypropylene Casing, Self-Lubricating Armature And A Honeywell Microswitch Rated For Over 1 Million Cycles, Waterboss Sump Pump Switch Has Received Ce And Iec Approvals..
Universal Water Level Switch With Piggyback Plug Supports Direct Connection To Motors Up To 1/2 Horsepower Or 13 Amps At 120V Ac. This Is For Non-Continuous Pump Operations And Emptying Use Only..
Features
- AUTOMATE WATER LEVEL CONTROL with the WaterBoss Float Switch for sump pumps, waste water tanks and septic pumps. Our tethered sump pump switch is a reliable alternative to a stem mounted float.
- UNIVERSAL WATER LEVEL SWITCH with piggyback plug supports direct connection to motors up to 1/2 horsepower or 13 amps at 120v AC. This is for non-continuous pump operations and emptying use only.
- 10-FOOT CABLE FLOAT SWITCH for water tanks and light to medium amounts of suspended solids is fully adjustable. The float reacts to liquid levels, shutting off the pump to prevent the motor burning up.
- RUGGEDLY BUILT with non-corrosive polypropylene casing, self-lubricating armature and a Honeywell microswitch rated for over 1 million cycles, WaterBoss Sump Pump Switch has received CE and IEC approvals.
- QUICK, EASY INSTALLATION and reliable, frustration-free water sensor monitoring make WaterBoss the ultimate water tank float switch. It comes with a 5-Year Warranty for your peace of mind.
- See more on Amazon...
Brand: Sump Alarm | Manufacturer: Sump Alarm, Inc
Dimensions: 3.25 x 6.50 x 1.50 inches | Weight: 0.75 pounds
See On Amazon #6
Level Sense 15 Feet Water Level Float Switch with Mounting Bracket
Asin: B01A4RZULM | Model: LS-FLOAT-KIT | PartNumber: LS-FLOAT-KIT | Ean: 0635797716522 | UPC: 635797716522
Dc Only. Use Ith A Relay Or Contactor For Ac Pump Control.
Conductors Are Sealed An Internal To One Closed, Jacketed Capble..
Sealed For Use Underwater. Recommended Only For Clean Clear Water..
Float Switch Can Detect Either High Level Or Low Level.
Features
- Float Switch Bracket Can Be Used for Pipes from 1" to 4"
- Float Switch Can Detect Either High Level or Low Level
- DC Only. Use ith a relay or contactor for AC pump Control
- Sealed for Use Underwater. Recommended only for clean clear water.
- Conductors are sealed an internal to one closed, jacketed Capble.
- See more on Amazon...
Brand: LEVEL SENSE | Manufacturer: Sump Alarm
See On Amazon #7
Anndason 6 Pieces Black Water Level Sensor Aquarium Tank Side Mounted Horizontal Liquid Float Switch
Asin: B071ZG4Y34 | Model: 43237-2 | PartNumber: 43237-2 | Ean: 0723610128154 | UPC: 723610128154
Max Switching Current : 0.5A;Max Breakdown Voltage : 220V Dc;Max Carry Current : 1.0A;Max Contact Resistance : 100M Ohm.
Thread Dia(Approx) : 1.54Cm / 0.6";Hex Head Size(Approx) : 2.5Cm / 1";Body Total Length : 8.8Cm / 3.5";Cable Length : 40Cm / 15.8".
Temperature Rating : -10 ~ +85 C;Float Ball Material : P.P;Float Body Material : P.P;Float Ball Size(Approx) : 2.35 X 1.7Cm (L*D).
Max Contact Rating : 10W;Max Switching Voltage : 100V Dc.
Features
- Color : Black;Net Weight : 24g;Package Content : 6 x Water Level Sensor
- Max Contact Rating : 10W;Max Switching Voltage : 100V DC
- Max Switching Current : 0.5A;Max Breakdown Voltage : 220V DC;Max Carry Current : 1.0A;Max Contact Resistance : 100m Ohm
- Temperature Rating : -10 ~ +85 C;Float Ball Material : P.P;Float Body Material : P.P;Float Ball Size(Approx) : 2.35 x 1.7cm (L*D)
- Thread Dia(Approx) : 1.54cm / 0.6;Hex Head Size(Approx) : 2.5cm / 1;Body Total Length : 8.8cm / 3.5;Cable Length : 40cm / 15.8
- See more on Amazon...
Brand: Anndason | Manufacturer: Anndason
Dimensions: 3.30 x 3.30 x 0.60 inches | Weight: 0.33 pounds
See On Amazon #8
Liyafy 5 Pcs Right Angle White Plastic PP Float Switch Fish Tank Liquid Water Level Control Sensor XSL-3508-P
Asin: B07Q1GJ7JL | Ean: 0745678062775 | UPC: 745678062775
Max Switching Current : 0.5A;Max Breakdown Voltage : 220V Dc;Max Carry Current : 1.0A;Max Contact Resistance : 100M Ohm.
Cable Length : 38Cm / 15"；Switch Body Size : 45 X 17Mm / 1.8" X0.7" Thread Dia(Approx) : 13Mm / 0.5".
Temperature Rating : -10 / +85 Celsuis;Float Ball Material : P.P;Float Body Material : P.P.
Model No. : Dp3500; Max Contact Rating : 10W.
Features
- Package Content : 5 x Water Level Sensor ; Color :White and yellow
- Model No. : DP3500; Max Contact Rating : 10W
- Max Switching Current : 0.5A;Max Breakdown Voltage : 220V DC;Max Carry Current : 1.0A;Max Contact Resistance : 100m ohm
- Temperature Rating : -10 / +85 Celsuis;Float Ball Material : P.P;Float Body Material : P.P
- Cable Length : 38cm / 15 Switch Body Size : 45 x 17mm / 1.8 x0.7 Thread Dia(Approx) : 13mm / 0.5
- See more on Amazon...
Brand: Liyafy | Manufacturer: Liyafy
Dimensions: 0.71 x 1.81 x 0.71 Inches | Weight: 0.00 Pounds
See On Amazon #9
High / Low Water Level Sensor Detector Alarm 120 dB Red Strobe Siren, Adjustable Alarm Volume, Sump Bobber Water leak Sensor,16.4ft Probe Cord, Suitable for Water Tank/Aquarium, Swimming Pool/Basement
Asin: B085Y4ZV1K | Ean: 0884710469476 | UPC: 884710469476
【Extendable Detection Line】- The Detection Line Of This Water Detector Can Be Extended To 164Ft To Meet The Needs Of Your Family. Please Use Good Quality Copper Core Extension Wire..
【Wide Range Of Uses】- This Dual Probe Water Level Detection Alarm Can Be Used In Many Scenes, Such As Solar Water Tank, Fish Tank, Swimming Pool, Basement, Warehouse, Bathroom, Kitchen, Laundry, Etc. In Addition, This High Decibel Alarm Can Also Be Connected With Other Sensors To Become A Home Safety Alarm System.
【Low Power Design】- 9V Replaceable Battery Power Supply, Standby For More Than 1 Year. When The Battery Power Is Low, The Water Sensor Sound Will Become Small Or There Is No Alarm Sound. Please Replace The Battery At This Time..
【120 Db With Red Light Strobe Alarm - Volume Adjustable】- The Volume Of The Water Alarm Can Be Adjusted According To The Installation Distance, And The Alarm Can Also Be Used As A Home Safety Alarm. You Can Diy Yourself, The Alarm Will Be Triggered When The Two Wires On The Probe Are Shorted..
Features
- Dual 5 Meter Floating Probe Design - It can detect water shortage or overflow. You can choose to use one or both functions according to your needs. The overflow probe is placed above the water level. When the water level rises to the detection position, the float will rise and trigger the magnetic induction, thus triggering the alarm. Instead, the water shortage probe is always placed in the underwater position, which triggers an alarm when the water level drops below the float.
- 120 dB with Red Light Strobe Alarm - Volume Adjustable - The volume of the water alarm can be adjusted according to the installation distance, and the alarm can also be used as a home safety alarm. You can DIY yourself, the alarm will be triggered when the two wires on the probe are shorted.
- Extendable Detection Line - The detection line of this water detector can be extended to 164ft to meet the needs of your family. Please use good quality copper core extension wire.
- Low Power Design - 9V replaceable battery power supply, standby for more than 1 year. When the battery power is low, the water sensor sound will become small or there is no alarm sound. Please replace the battery at this time.
- Wide Range of Uses - This dual probe water level detection alarm can be used in many scenes, such as solar water tank, fish tank, swimming pool, basement, warehouse, bathroom, kitchen, laundry, etc. In addition, this high decibel alarm can also be connected with other sensors to become a home safety alarm system
- See more on Amazon...
Brand: Shonmau | Manufacturer: Xmall
Dimensions: 1.77 x 4.84 x 2.76 inches
See On Amazon #10
Gikfun M8 Liquid Level Sensor Fish Tank Water Float Switch PP Plastic Ball Float Controller DIY Kit for Arduino EK1373x3
Asin: B07G13JB57 | Ean: 8002124225606
Brand: Gikfun | Manufacturer: Esooho
See On Amazon #11
Food Grade Optical Infrared Water Liquid Level Sensor 500mm Cable High Sensibility, Working with Liquid Level Controller(Pack of 3)
Asin: B075R6SSHJ | Ean: 0658126545365 | UPC: 658126545365
The Sensor Offers ±1 Mm Accuracy And Broad Liquid Compatibility..
Cable Length 500Mm.Input 5Vdc,Analog Output,Xh2.5 Connector.
1 Years Warranty:Epttech Has Provided Liquid Detection Solution For Over 20 Years.1 Years Gurranty For Longterm Service..
They Are Suitable For High, Low Or Intermediate Level Detection In Practically Any Tank, Large Or Small..
Installation Is Simple And Quick Through The Tank Top, Bottom Or Side..
Features
- They have no moving parts and are ideal for point level sensing of water and other liquids.
- Installation is simple and quick through the tank top, bottom or side.
- The sensor offers 1 mm accuracy and broad liquid compatibility.
- They are suitable for high, low or intermediate level detection in practically any tank, large or small.
- Cable length 500mm.Input 5VDC,Analog output,XH2.5 connector
- 1 YEARS WARRANTY:EPTTECH has provided liquid detection solution for over 20 years.1 years gurranty for longterm service.
- See more on Amazon...
Brand: EPTTECH | Manufacturer: EPTTECH
See On Amazon #12
Wired Water Sensor Relay Dry Contact Signal Output Water Level Sensor DC12V Power Water Detector Applicable to The Equipment Room and Base Station
Asin: B0CPHTHT29 | Model: TM-108 | PartNumber: TM-108
The Product Comes Standard With 1.5M Wiring, And It Can Also Be Extended By Yourself..
Originally, The Product Has Been Mass-Produced For 20 Years, And The Excellent Quality Is Widely Used In The Unanimous Favor Of New And Old Users.
The Product Has High Sensitivity And Zero False Positives. It Is Very Suitable For Use In Important Areas Such As Base Stations, Computer Rooms, And Parking Garages..
It Is Powered By A Dc12v Power Supply And Has An Optional Dual Nc No Signal Output.
Features
- It is made of zinc alloy shell, which has ultra-stable performance and strong practicability. Wide range of applications.
- It is powered by a DC12V power supply and has an optional dual NC NO signal output
- The product comes standard with 1.5m wiring, and it can also be extended by yourself.
- The product has high sensitivity and zero false positives. It is very suitable for use in important areas such as base stations, computer rooms, and parking garages.
- Originally, the product has been mass-produced for 20 years, and the excellent quality is widely used in the unanimous favor of new and old users
- See more on Amazon...
Brand: cnzhihuizai | Manufacturer: cnzhihuizai
Dimensions: 14.90 x 1.85 x 1.18 inches
See On Amazon #13
Taidacent Non Contact Liquid Level Sensor Contactless Water Tank Water Level Sensor for Tank Water Level Control with Low and High Level Output
Asin: B07FC5RGC7 | Model: Y25-V | PartNumber: Y25-V | Ean: 0702004746242 | UPC: 702004746242
The Liquid To Be Tested Is Required To Be Electrically Conductive, The Contact Surface Is Non-Metal, And The Pipe Is Easy To Install And Can Be Widely Used..
You Can Adjust Sensitivity: Remove The Plastic Cover Of The Sensors And Turn The Very Small Screw, Clockwise Decrease Sensitivity, Counter Clockwise To Increase The Sensitivity..
High And Low Level Output: If There Is Induction, The Output Is High Level; No Induction, The Output Is Low Level. Specially Designed For Non-Metallic Pipe Liquid Level Detection.
The Liquid Level Of Various Toxic Substances, Strong Acids, Strong Alkalis And Various Liquids In The High-Pressure Closed Container Can Be Detected..
Features
- The intelligent non-contact liquid level sensor uses advanced signal processing technology and high-speed signal processing chip to break through the influence of the wall thickness of the container and realize the true non-contact detection of the liquid level in the closed container.
- The liquid level of various toxic substances, strong acids, strong alkalis and various liquids in the high-pressure closed container can be detected.
- The liquid to be tested is required to be electrically conductive, the contact surface is non-metal, and the pipe is easy to install and can be widely used.
- High and low level output: If there is induction, the output is high level; no induction, the output is low level. Specially designed for non-metallic pipe liquid level detection
- You can adjust sensitivity: Remove the plastic cover of the sensors and turn the very small screw, clockwise decrease sensitivity, counter clockwise to increase the sensitivity.
- See more on Amazon...
Brand: Taidacent | Manufacturer: Taidacent
See On Amazon #14
Copapa Tanks Horizontal Liquid Float Switch Water Level Sensor NO NC
Asin: B00AKW29U2 | Model: a12100900ux0183 | PartNumber: a12100900ux0183 | Ean: 0700836456728 | UPC: 700836456728
Voltage : 10A Ac 250V;Size(Each) : 3.4 X 1.2Cm/1.33" X 0.47"(L*T);.
Package Content : 1 X Ceramic Thermostat.
Net Weight : 20G;.
Model.No : Ksd301; Action Type : (Nc)Normal Closed; Action Temperature : 150C/302F; Material : Metal, Ceramic;.
Features
- Product Name : Ceramic Thermostat; Color : White, Silver Tone
- Model.No : KSD301; Action Type : (NC)Normal Closed; Action Temperature : 150C/302F; Material : Metal, Ceramic;
- Voltage : 10A AC 250V;Size(Each) : 3.4 x 1.2cm/1.33 x 0.47(L*T);
- Net Weight : 20g;
- Package Content : 1 x Ceramic Thermostat
- See more on Amazon...
Brand: sourcing map | Manufacturer: Copapa
See On Amazon #15
12V DC Wired Water Detectors Water Leak Alarm Module Leakage Flood Sensor with 10A NC NO Relay Output Control, Turns Off Flood Source (White)
Asin: B08WWXK2P7 | Ean: 0750225419018 | UPC: 750225419018
Sensitivity Adjustment To Avould False Alarm Or Missing Alarm.
What Do You Get:1X Water Leak Module, 1X Water Probe.
Built-In Buzzer, 80Db Sound, It Can Turn On Or Off.
Nc/No Relay Output, Max. Load 260V 10A. Free For Big Siren Or Other Devices, Such As Shut Off Valve, As Soon As The Sensor Detects Water, It Sound An Alarm And Stop Your Home’S Water Supply..
Features
- DC10 to 15V Water Detector, great for security system or standalone water monitoring system
- NC/NO Relay Output, Max. Load 260V 10A. Free for big siren or other devices, such as shut off valve, As soon as the sensor detects water, it sound an alarm and stop your home s water supply.
- Sensitivity adjustment to avould false alarm or missing alarm
- Built-in buzzer, 80dB sound, it can turn on or off
- What do you get:1x Water Leak Module, 1x Water Probe
- See more on Amazon...
Brand: Tokatuker | Manufacturer: Tokatuker
Dimensions: 1.26 x 3.23 x 1.97 Inches
See On Amazon #16
BRODY Automatic Float Switch Water Tank Level Sensor on/off control with 10' Cable Sump Pump
Asin: B00A9GDIQ8 | Model: FSK-6 | PartNumber: FSK-6 | Ean: 0662425059058 | UPC: 662425059058
Commonly Used In Sump And Condensate Pumps. Used For Sensing The Level Of Liquid In The Tank, Controlling The Pump, The Indicator, The Alarm, Or Other Devices. Regulates Water Level Measurements In Electrically Conductive Liquids In Gauge Pipes, Groundwater Wells, Sinks, Barrels And Tanks. Long-Term Observations For Periodic Measurement Checks. Continuous Water Level Detection During Pumping Tests. Exploration Of Well Depths With The Bottom Sensor..
High Accuracy And Stable Working Performance - Brody Float Switch Features High-Quality Brody-Manufactured Switches Inside A Robust Enclosure. They Also Have Short Actuation Lengths, Which Means You Have Reliable Switching No Matter How Much Slack You Give The Switch. No Annoying Components Or Brackets When Cranking. Does Not Contain Mercury. Non-Toxic Type, Can Be Used In Houses Or Factories.Can Work With Any Kind Of Pump, Sump Pumps, Sewage Pumps , Centrifugal Pumps, Etc..
Simple Connection And Easy To Use - This Compact, Horizontally Mounted Float Switch Device Can Be Placed At The Top Or The Bottom Of The Tank. The Plug Has A 10 Feet Cable With An Adjustable Counterweight That Accommodates Most Uses. As The Liquid Level Reaches The Upper Or Lower Switching Valve, The Controller Contact Will Send Out A Signal. The Float Switch Can Be Used For An In-Let Flow Of Water And Out-Let Flow Of Water From The Tank To Controlled The Level Of Water, It Works In Both Ways..
Switch Comes Equipped With A Generous 10-Foot Cord And Adjustable Counterweight, Inside A Robust Enclosure (Protection Degree). Whether You Need To Fill A Container Or Empty A Basement, This Water Level Meter Has Got You Covered (Dual Function Operation). Also, The Float Switches Are Rounded So That They Don't Get Caught On Any Floating Solids. Made Of Plastic And Metal..
Features
- Float Switch Water Level Control Sensor with 10' Cable
- Switch comes equipped with a generous 10-foot cord and adjustable counterweight, inside a robust enclosure (Protection Degree). Whether you need to fill a container or empty a basement, this water level meter has got you covered (dual function operation). Also, the float switches are rounded so that they don't get caught on any floating solids. Made of Plastic and Metal.
- Commonly used in sump and condensate pumps. Used for sensing the level of liquid in the tank, controlling the pump, the indicator, the alarm, or other devices. Regulates water level measurements in electrically conductive liquids in gauge pipes, groundwater wells, sinks, barrels and tanks. Long-term observations for periodic measurement checks. Continuous water level detection during pumping tests. Exploration of well depths with the bottom sensor.
- SIMPLE CONNECTION AND EASY TO USE - This compact, horizontally mounted float switch device can be placed at the top or the bottom of the tank. The plug has a 10 feet cable with an adjustable counterweight that accommodates most uses. As the liquid level reaches the upper or lower switching valve, the controller contact will send out a signal. The float switch can be used for an in-let flow of water and out-let flow of water from the tank to controlled the level of water, it works in both ways.
- HIGH ACCURACY AND STABLE WORKING PERFORMANCE - BRODY float switch features high-quality BRODY-manufactured switches inside a robust enclosure. They also have short actuation lengths, which means you have reliable switching no matter how much slack you give the switch. No annoying components or brackets when cranking. Does not contain mercury. Non-toxic type, can be used in houses or factories.Can work with any kind of pump, sump pumps, sewage pumps , centrifugal pumps, etc.
- See more on Amazon...
Brand: BRODY | Manufacturer: G&W
Dimensions: 1.50 x 5.00 x 8.00 Inches | Weight: 2.00 Pounds
See On Amazon #17
TEMCo Float Switch for Sump Pump & Water Level NO/NC Control Function 13ft Cord 5 Year Warranty CN0359
Asin: B07DXGHJ5F
16 Amp Max, 120/220 Vac Rated. Works On Most 1/2 Hp Or Smaller Pumps. Usable For Potable Water..
5 Year Guarantee Against Any Manufacturing Defects. 1 Year No-Questions-Asked Return Policy..
Features A Reliable High Quality German-Made Cherry Brand Switch. Ip68 Rating. Polypropylene Plastic Casing, Neoprene Rubber Cord..
13 Ft Cord With Adjustable Counterweight Accommodates Most Applications..
Features
- Dual Function (Fill or Empty) Operation. See Circuit Diagram in Gallery.
- 13 FT cord with adjustable counterweight accommodates most applications.
- 16 Amp max, 120/220 VAC rated. Works on most 1/2 HP or smaller pumps. Usable for potable water.
- Features a reliable high quality German-made Cherry brand switch. IP68 rating. Polypropylene plastic casing, neoprene rubber cord.
- 5 year Guarantee against any manufacturing defects. 1 year no-questions-asked return policy.
- See more on Amazon...
Brand: TEMCo Industrial | Manufacturer: TEMCo
See On Amazon #18
12V DC Water Level Controller Module Water Level Detection Sensor Automatic Liquid Control Switch PCB Board Supports Automatic Water Pumping/Filling/Draining
Asin: B091ZJDJTG
➤【Anti‑Interference】-- Small Size, Low Power Consumption, Large Switch Capacity, Strong Anti‑Interference, High Functional Stability.
➤【Simple Easy Wiring】-- Using High‑Quality Materials, Excellent Performance, Easy Wiring, And Long Service Life.
➤【Working Principle】-- Stable Realization Of Water Pump When The Pool (Water Tower) Is Short Of Water, And Automatically Stops When It Is Full.
➤【Water Level Detect】-- According To Water Level Of The Detection Pool (Water Tower), The High‑Current Relay Is Controlled To Realize The Control.
Features
- SUPPORT FUNCTION -- Water level sensor controller, supports automatic water pumping, filling and draining. With a small, simple wiring
- WATER LEVEL DETECT -- According to water level of the detection pool (water tower), the high current relay is controlled to realize the control
- ANTI INTERFERENCE -- Small size, low power consumption, large switch capacity, strong anti interference, high functional stability
- WORKING PRINCIPLE -- Stable realization of water pump when the pool (water tower) is short of water, and automatically stops when it is full
- SIMPLE EASY WIRING -- Using high quality materials, excellent performance, easy wiring, and long service life
- See more on Amazon...
Brand: Walfront | Manufacturer: Walfront
Dimensions: 0.39 x 0.39 x 0.39 Inches | Weight: 0.07 pounds
See On Amazon #19
Ximimark 3 pc Water Level Sensor Horizontal PP Side Mount Float Switch for Tank Pool Arduino
Asin: B0B7WPBPBC | Model: LY1653 | PartNumber: LY1653 | Ean: 0735209931656 | UPC: 735209931656
Good Quality, Not Easily Damaged And Good Quality..
Thank You So Much For Your Purchasing From Our Store.Any Question ,Please Feel Free To Contact Us..
Package Indluced：3 Pc Water Level Sensor Horizontal Pp Side Mount Float Switch For Tank Pool Arduino.
Use Them With Hydroponics, Saltwater Tank, Freshwater Tank, Gardening, Aquariums For Power Head Control, Pet Bowls, Fish Tanks, Filtration, Heating Etc..
Features
- A float switch is a device used to sense the level of liquid within a tank, it may actuate a pump, an indicator, an alarm, or other device.
- Use them with hydroponics, saltwater tank, freshwater tank, gardening, aquariums for power head control, pet bowls, fish tanks, filtration, heating etc.
- Good quality, Not easily damaged and good quality.
- Package Indluced 3 pc Water Level Sensor Horizontal PP Side Mount Float Switch For Tank Pool Arduino
- Thank you so much for your purchasing from our store.Any question ,please feel free to contact us.
- See more on Amazon...
Brand: Ximimark | Manufacturer: Ximimark
See On Amazon #20
mxuteuk 2 Pcs Side Mounted Horizontal Liquid Float Switch Water Level Sensor Black for Aquariums Tank DPL-1-BK
Asin: B08B4JQHN9 | Model: DPL-1-BK | PartNumber: DPL-1-BK
Thread Dia(Approx): M16 Mm ; Thread Dia(Approx) : 1.55Cm / 0.61" ; Float Ball Size(Approx) : 2.3 X 1.7Cm /0.9" X 0.67" (L*D) ; Total Length : 84Mm / 3.31" ; Cable Length: 40Cm/15.8".
Package Content : 2 Pcs X Float Switch.
The Switch Has The Advantages Of High Sensitivity And Durability. Pp Material Is Environmentally Friendly And Has Excellent Acid And Alkali Resistance..
Max Contact: Rating 10W ; Max Switching Voltage: 100V Dc ; Max Switching Current: 0.5A ； Max Contact Resistance : 100M Ohm.
Features
- Product Name: Water Level Sensor ; Float Ball Material: PP ; Color : Black ; Temperature Rating: -30~125 degree Centigrade ; Switch Forms N.O /N.C.
- Max Contact: Rating 10W ; Max Switching Voltage: 100V DC ; Max Switching Current: 0.5A Max Contact Resistance : 100m ohm
- Thread Dia(Approx): M16 mm ; Thread Dia(Approx) : 1.55cm / 0.61 ; Float Ball Size(Approx) : 2.3 x 1.7cm /0.9 x 0.67 (L*D) ; Total Length : 84mm / 3.31 ; Cable Length: 40cm/15.8
- The switch has the advantages of high sensitivity and durability. PP material is environmentally friendly and has excellent acid and alkali resistance.
- Package Content : 2 Pcs x Float Switch
- See more on Amazon...
Brand: mxuteuk | Manufacturer: mxuteuk
Weight: 0.11 pounds
See On Amazon
Looking For Something Else?
Search