SmallRig Cage for Sony FX30 FX3 with Cable Clamp for HDMI, Classic Bright Black Surface, Included Cold Shoe and NATO Rail, Modular Design Compatible with Original XLR Handle - 4183
Asin: B095S7RWVY | Model: 3278-SR | PartNumber: 3278-SR | Ean: 6941590012353
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Multiple Mounting Points: The Cage Features 1/4"-20 Holes Fits Magic Arm 3873; The Locating Hole For Arri Suits Top Handle 3765; The Side Nato Rail Can Attach Side Handle 3813; The 1/4”-20 Positioning Holes On The Upper Left Corner And Left Side Can Attach Rod Clamp 3598 For Follow Focus; Two 1/4”-20 Holes On The Side Can Attach Quick Release Plate; Built-In Cold Shoe Can Attach Microphone 3468, Led Video Light 3286B..
Note: 1. The Spacing Between The 1/4" Holes On The Nato Rail Is 27Mm, So It Is Not Compatible With Accessories With A Spacing Of 18Mm. 2. When Using The Original Xlr Handle, Please Remove The Nato Rail First..
Power Backup Solution: Smallrig Np-Fz100 Camera Battery Charger Set Is Available Now, Two 2040Mah(Real) Rechargeable Batteries And A Charger Brings Long Battery Life For Your Videos And Photos Shooting, If You Need A Sufficient Power Supply, Please Search Smallrig Np-Fz100 Battery 3824(Asin:B09z6trbh8)..
Quick Release Plate For Arca: The Qr Plate At The Bottom Is Compatible For Dji Rs 2, Rsc 2, Rs 3, Rs 3 Pro, Quick Release Plate (Height Increase Pad) And Plate For Arca 3154. The Cage Also Features Strap Holes On Both Sides And The Bottom, Which Are Compatible With Hand Strap 3848, Shoulder Strap Psc2428, Etc. The Bottom Qd Socket To Install Qd Shoulder Strap, And A Magnetic Wrench Is Included For Easy Disassembly And Assembly..
Classic Bright Black Surface: Classic Design Features Bright Black Shape, Bring You A New Sense Of Fashion. The Battery Compartment Is Designed With An Hinge Arm To Fit Camera Curve For Improved Grip Experience For Little Finger. Built-In Rubber Pads Preventing Scratches..
Features
- Designed for Sony FX30 / FX3: The FX30 / FX3 cage features modular design, including a NATO rail module and a U-shaped cage module. The NATO rail is secured on the top via two 1/4"-20 screws and allow connecting the original XLR top handle after disassembly; the U-shaped cage module is fixed via 1/4"-20 screws on both sides and the bottom to prevent twisting. The package comes with a dedicated cable clamp for HDMI to protect the interface and ensure the signal stability during shooting.
- Classic Bright Black Surface: Classic design features bright black shape, bring you a new sense of fashion. The battery compartment is designed with an hinge arm to fit camera curve for improved grip experience for little finger. Built-in rubber pads preventing scratches.
- Multiple Mounting Points: The cage features 1/4-20 holes fits Magic Arm 3873; the locating hole for ARRI suits Top Handle 3765; the side NATO rail can attach Side Handle 3813; the 1/4 -20 positioning holes on the upper left corner and left side can attach Rod Clamp 3598 for follow focus; two 1/4 -20 holes on the side can attach quick release plate; built-in cold shoe can attach Microphone 3468, LED Video Light 3286B.
- Quick Release Plate for Arca: The QR plate at the bottom is compatible for DJI RS 2, RSC 2, RS 3, RS 3 Pro, quick release plate (height increase pad) and plate for Arca 3154. The cage also features strap holes on both sides and the bottom, which are compatible with Hand Strap 3848, Shoulder Strap PSC2428, etc. The bottom QD socket to install QD shoulder strap, and a magnetic wrench is included for easy disassembly and assembly.
- Note: 1. The spacing between the 1/4 holes on the NATO rail is 27mm, so it is not compatible with accessories with a spacing of 18mm. 2. When using the original XLR handle, please remove the NATO rail first.
- Power Backup Solution: SmallRig NP-FZ100 camera battery charger set is available now, two 2040mAh(Real) rechargeable batteries and a charger brings long battery life for your videos and photos shooting, if you need a sufficient power supply, please search SmallRig NP-FZ100 Battery 3824(Asin:B09Z6TRBH8).
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 4.65 x 5.43 x 2.32 inches | Weight: 0.43 Pounds
See On Amazon Similar To SmallRig Cage for Sony FX30
#1
SmallRig Cage with Silicone Handgrip & Cold Shoe for Sony a6100, a6300, a6400-3164
Asin: B08VD9BSRX | Model: 3164-SR | PartNumber: 3164-SR
【Secure Lock Points & Prevent Twisting】This Aluminum Alloy Cage 3164 Secures The Camera Via A 1/4"-20 Screw, And A M2.5 Screw On The Side To Prevent Twisting. Plus, An Optional Cable For Hdmi Clamp 1693 Is Separately Available To Protect The Port For Hdmi..
【Built-In Screwdriver】A Built-In Screwdriver Stores On The 3164 Cage Bottom For Quick Assembly And Disassembly. Also, The Mounting Surface Features Rubber Pads That Hold Your Camera Securely To Prevent Scratching..
【Power Backup Solution】Smallrig Np-Fw50 Camera Battery Charger Set Is Available Now, Two 1030Mah(Real) Rechargeable Batteries And A Charger Brings Long Battery Life For Your Videos And Photos Shooting, If You Need A Sufficient Power Supply, Please Search Smallrig Np-Fw50 Battery 3818.
【Integrated Plate For Arca-Style】There Is An Integrated Plate For Arca-Type On The Cage Bottom, And It Allows You To Mount Quickly On A Tripod For Arca Standard..
【Multiple Mounting Points】The Smallrig Cage With Silicone Handle 3164 Features Two Cold Shoes, Multiple 1/4"-20 Threaded Holes And For Arri 3/8"-16 Locating Holes For Attaching The Articulating Arms, External Monitors, Microphones Or Other Accessories..
Features
- FOR SONY A6400/A6300/A6100 The SmallRig Camera Cage 3164 is especially designed for Sony cameras a6400/a6300/a6100 with a removable, non-slip and soft silicone handgrip.
- MULTIPLE MOUNTING POINTS The SmallRig Cage with Silicone Handle 3164 features two cold shoes, multiple 1/4-20 threaded holes and for ARRI 3/8-16 locating holes for attaching the articulating arms, external monitors, microphones or other accessories.
- SECURE LOCK POINTS & PREVENT TWISTING This aluminum alloy cage 3164 secures the camera via a 1/4-20 screw, and a M2.5 screw on the side to prevent twisting. Plus, an optional Cable for HDMI Clamp 1693 is separately available to protect the port for HDMI.
- INTEGRATED PLATE FOR ARCA-STYLE There is an integrated plate for Arca-Type on the cage bottom, and it allows you to mount quickly on a tripod for Arca standard.
- BUILT-IN SCREWDRIVER A built-in screwdriver stores on the 3164 cage bottom for quick assembly and disassembly. Also, the mounting surface features rubber pads that hold your camera securely to prevent scratching.
- Power Backup Solution SmallRig NP-FW50 camera battery charger set is available now, two 1030mAh(Real) rechargeable batteries and a charger brings long battery life for your videos and photos shooting, if you need a sufficient power supply, please search SmallRig NP-FW50 Battery 3818
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 2.60 x 5.39 x 3.35 Inches | Weight: 0.43 Pounds
See On Amazon #2
SmallRig Cage Kit for Sony A6700 with a Cable Clamp for HDMI, Built-in Quick Release Plate for Arca-Type, Film Movie Making Camera Video Cage with Shoe Mount, 1/4''-20 & 3/8''-16 Threaded Holes - 4336
Asin: B0CF54GL7B | Model: 4336-CF | PartNumber: 4336-CF
Full Protection: The All-In-One Complete Housing Fits The Sony A6700 Very Well, Locks The Camera By 1/4"-20 Screw And M2.5 Screw, Which Maintains Full Access To Your Ports, Controls And Battery Door And Provides Protection For Your Portable Camera Platform. Note: Remove The Strap Ring On The Right Side Of The Camera Before Installing The Cage. Refer To The User Manual For Installation..
With Hdmi Cable Clamp: The Sony A6700 Cage Kit Includes Cable Clamp That Protects Ports For Stable Transmission And Allows Quick Assembly And Disassembly With A Thumb-Scream: If You Need To Use The Headphone Jack From The Carera, You Must Remove The Hdmi Clamp Cable First..
Integrated Arca-Switzerland Plate: The Built-In Quick Release Plate For Arca-Swiss Makes It Easy To Quickly Switch Between Tripods, Stabilizers Or Handheld Devices For Dji Rs 2 / Rsc 2 / Rs 3 / Rs 3 Pro Shooting Modes..
Multiple Mounting Points: Comes With 1/4''-20 And 3/8''-16 Threaded Holes For Connecting Accessories Such As A 2916 Side Handle, Magic Arm With 2070 Ball Head And A 3/8"-16 Top Location Hole For 2165/3765 Top Handle And Cold Shoe That Supports Microphones And Led Lights The Cage Also Fits The Strap 3848 Hand Strap, Psw2398 Wrist Strap And Psc2428 Shoulder Strap..
Excellent Grip Feeling: Featured With An Additional Hinge Arm On The Battery Door, This Product Not Only Fits The Curve Of The Camera Perfectly, But Also Significantly Improves The Overall Grip Feel.The Ergonomic Design Provides A Comfortable And Secure Grip Of The Camera..
Features
- For Sony A6700: SmallRig Cage 4336 is designed for Sony A6700, which includes a cable clamp for HDMI, protects the camera while making it easy to record videos with its multiple accessory mounting points, which also allows you to focus on capturing stunning images.
- Excellent Grip Feeling: Featured with an additional hinge arm on the battery door, this product not only fits the curve of the camera perfectly, but also significantly improves the overall grip feel.The ergonomic design provides a comfortable and secure grip of the camera.
- Full Protection: The all-in-one complete housing fits the Sony A6700 very well, locks the camera by 1/4-20 screw and M2.5 screw, which maintains full access to your ports, controls and battery door and provides protection for your portable camera platform. Note: Remove the strap ring on the right side of the camera before installing the cage. Refer to the user manual for installation.
- Multiple Mounting Points: Comes with 1/4''-20 and 3/8''-16 threaded holes for connecting accessories such as a 2916 side handle, magic arm with 2070 ball head and a 3/8-16 top location hole for 2165/3765 top handle and cold shoe that supports microphones and LED lights The cage also Fits the strap 3848 hand strap, PSW2398 wrist strap and PSC2428 shoulder strap.
- With HDMI Cable Clamp: The Sony A6700 Cage Kit includes cable clamp that protects ports for stable transmission and allows quick assembly and disassembly with a thumb-scream: If you need to use the headphone jack from the carera, you must remove the HDMI clamp cable first.
- Integrated Arca-Switzerland Plate: The built-in quick release plate for Arca-Swiss makes it easy to quickly switch between tripods, stabilizers or handheld devices for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro shooting modes.
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 2.45 x 5.49 x 3.58 inches | Weight: 0.34 pounds
See On Amazon #3
SmallRig A7RIII / A7III / A7M3 Camera Cage for Sony A7RIII / A7III / A7M3 Camera (ILCE-7RM3 / A7R Mark III), w/Shoe Mount, Built-in NATO Rail, Accessible for Sony XLR-K2M/K1M, Black 2087
Asin: B0787WYWF7 | Model: 2087B-SR | PartNumber: 2087B-SR | Ean: 0663701769562, 6941590000985 | UPC: 663701769562
【Mounting Points】Add Plenty Of 1/4"-20 And 3/8"-16 Threaded Holes For Attaching More Accessories. Also Features Locating Holes For Arri Standard And A Cold Shoe On The Top To Attach Corresponding Accessories.
【What You Get】1 X Cage For Sony A7riii 2087; Friendly 24-Hour Customer Support, 30-Day No-Hassle Return Service, Worry-Free 2-Year Warranty..
【Power Backup Solution】Smallrig Np-Fz100 Camera Battery Charger Set Is Available Now, Two 2040Mah(Real) Rechargeable Batteries And A Charger Brings Long Battery Life For Your Videos And Photos Shooting, If You Need A Sufficient Power Supply, Please Search Smallrig Np-Fz100 Battery 3824.
【Recommendations】It Could Attach Monitor Mount Bse2346/2070 For The Monitor. For Arri Locating Points On The Top Are Compatible With Corresponding Locating Pins. 1/4''-20 Threaded Holes On The Top Could Be Mounted With Top Handle 1984/1638 For Handheld Shooting, Or They Could Be Mounted With Evf Support 1842 For Better Shooting. It Could Be Mounted With Hdmi Lock 3676/1679 To Protect Hdmi Cable And Cable Port..
【Perfect Protection】The Updated Alpha A7riii/A7iii Cage Adds A Second Locking Point On The Right Side To Prevent From Twisting. Two Pieces Of Rubber Cushion On The Bottom That Prevent The Camera From Scratching.
Features
- FULL ACCESSIBILITY ONLY FITS FOR SONY A7RIII / A7III /A7M3 Camera. The cage would not block any buttons on the camera and you are able to access not only the battery but even the SD card slot. The hot shoe is accessible for Sony XLR-K2M/K1M
- PERFECT PROTECTION The updated alpha A7RIII/A7III cage adds a second locking point on the right side to prevent from twisting. Two pieces of rubber cushion on the bottom that prevent the camera from scratching
- MOUNTING POINTS Add plenty of 1/4-20 and 3/8-16 threaded holes for attaching more accessories. Also features locating holes for ARRI standard and a cold shoe on the top to attach corresponding accessories
- RECOMMENDATIONS It could attach Monitor Mount BSE2346/2070 for the monitor. For ARRI locating points on the top are compatible with corresponding locating pins. 1/4''-20 threaded holes on the top could be mounted with Top Handle 1984/1638 for handheld shooting, or they could be mounted with EVF Support 1842 for better shooting. It could be mounted with HDMI Lock 3676/1679 to protect HDMI cable and cable port.
- WHAT YOU GET 1 x Cage for Sony A7RIII 2087; Friendly 24-hour Customer Support, 30-day No-hassle Return Service, Worry-free 2-year Warranty.
- Power Backup Solution SmallRig NP-FZ100 camera battery charger set is available now, two 2040mAh(Real) rechargeable batteries and a charger brings long battery life for your videos and photos shooting, if you need a sufficient power supply, please search SmallRig NP-FZ100 Battery 3824
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SmallRig
Dimensions: 3.94 x 3.94 x 3.94 inches | Weight: 0.51 pounds
See On Amazon #4
SMALLRIG Camera Cage Only for Sony Alpha 7S III / A7S III / A7SIII / A7S3-2999
Asin: B08HCMFPN4 | Model: 2999 | PartNumber: 2999 | Ean: 6941590001968
【Multiple Mounting Points】In Addition To One Cold Shoe Mount And Multiple 1/4"-20 And 3/8"-16 Threaded Holes, This Formfitting Aluminum Cage Features Several Arri-Style Mounts For Preventing Accessories From Twisting When Mounted On The Cage. It Also Comes With A Built-In Nato Rail On The Left Of The Cage. Mounting Holes On The Front Allow Mounting A Separately Available Lens Adapter 1764..
【Sweet Design】Lightweight Design With Only 200G. Strap Holes Are Included To Add A Separately Available Wrist Strap Or Neck Strap To Your Rig. Besides, With Built-In Magnetic Suction Design, The Included Allen Wrench Is Ready To Use Without Fear Of Loss..
【Power Backup Solution】Smallrig Np-Fz100 Camera Battery Charger Set Is Available Now, Two 2040Mah(Real) Rechargeable Batteries And A Charger Brings Long Battery Life For Your Videos And Photos Shooting, If You Need A Sufficient Power Supply, Please Search Smallrig Np-Fz100 Battery 3824.
【Recommendations】The Cage Is Compatible With Smallrig Universal Accessory System. You Can Attach Smallrig Wooden Side Handle 2093 For Hand-Held Shooting, And Smallrig Cable Clamp 3000 To Protect The Hdmi Cable And Port. Arri-Style Mounts On The Top And Side Are Provided To Attach Smallrig Arri Locating Handle Or Smallrig Ball Head Magic Arm..
【Perfect Protection】The Cage Incorporates An Anti-Twist Design With An M2.5 Screw Fixed To The Strap Hole In Addition To The 1/4"-20 Camera Mounting Screw So Your Camera Can't Move Around In The Cage. Smallrig Cage 2999 Also Incorporates An Anti-Twist Design With Padding On The Base To Protect The Camera From Scratching..
Features
- FORMFITTING FULL CAGE SmallRig A7S III Cage 2999 maintains access to the camera's controls and hot shoe. Made of premium aluminium alloy, the cage is a solid piece of metal that is highly resistant to oxidation and stands the test of time.
- PERFECT PROTECTION The cage incorporates an anti-twist design with an M2.5 screw fixed to the strap hole in addition to the 1/4-20 camera mounting screw so your camera can't move around in the cage. SmallRig Cage 2999 also incorporates an anti-twist design with padding on the base to protect the camera from scratching.
- MULTIPLE MOUNTING POINTS In addition to one cold shoe mount and multiple 1/4-20 and 3/8-16 threaded holes, this formfitting aluminum cage features several ARRI-style mounts for preventing accessories from twisting when mounted on the cage. It also comes with a built-in NATO rail on the left of the cage. Mounting holes on the front allow mounting a separately available lens adapter 1764.
- RECOMMENDATIONS The cage is compatible with SmallRig universal accessory system. You can attach SmallRig Wooden Side Handle 2093 for hand-held shooting, and SmallRig Cable Clamp 3000 to protect the HDMI cable and port. ARRI-style mounts on the top and side are provided to attach SmallRig ARRI Locating Handle or SmallRig Ball Head Magic Arm.
- SWEET DESIGN Lightweight design with only 200g. Strap holes are included to add a separately available wrist strap or neck strap to your rig. Besides, with built-in magnetic suction design, the included Allen Wrench is ready to use without fear of loss.
- Power Backup Solution SmallRig NP-FZ100 camera battery charger set is available now, two 2040mAh(Real) rechargeable batteries and a charger brings long battery life for your videos and photos shooting, if you need a sufficient power supply, please search SmallRig NP-FZ100 Battery 3824
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SmallRig
Dimensions: 2.52 x 5.75 x 4.21 inches | Weight: 0.49 pounds
See On Amazon #5
SmallRig FX3 / FX30 XLR Handle Top Plate for Sony FX3 / FX30 XLR Unit - MD3990
Asin: B0B715NLCX | Model: MD3990-SR | PartNumber: MD3990-SR
【Multiple Mounting Points】The Plate 3990 Also Equipped With Multiple 1/4''-20 Threaded Holes And A Built-In Cold Shoe Mount For Attaching Other Devices, Such As A Microphone, Led Light, Etc..
【Aluminum & Stainless Steel Construction】Weights Only 65G, The Top Plate Features A Compact Design, And It Is Made Of Lightweight Aluminum Alloy And Stainless Steel, Scratch-Resistant.
【Cushioning To Protect Gear】 It Perfectly Fits The Top Of Fx3 / Fx30 Xlr Handle With Built-In Cushions For Full Protection.
【Two Ways To Use】This Top Plate Is Available To Be Attached To Original Fx3 / Fx30 Xlr Unit Directly And Is Also Compatible With Smallrig Md3490. It Can Mount Onto The Top Of The Fx3 / Fx30 Xlr Unit And Includes An Adapter That Allows You To Secure It Onto The Smallrig Fx3 / Fx30 Top Handle Extension (Id: Smallrig Md3490) Using A 3/8"-16 Thread.
Features
- Only for Sony FX3 / FX30 XLR Unit SmallRig Top Plate MD3990 is designed to protect the audio unit for Sony FX3 / FX30 XLR Original Top Handle. It takes advantage of the space on the top of the FX3 / FX30 XLR Unit to add accessories with this top plate
- Two Ways To Use This top plate is available to be attached to original FX3 / FX30 XLR unit directly and is also compatible with SmallRig MD3490. It can mount onto the top of the FX3 / FX30 XLR unit and includes an adapter that allows you to secure it onto the SmallRig FX3 / FX30 Top Handle Extension (ID: SmallRig MD3490) using a 3/8-16 thread
- Multiple Mounting Points The plate 3990 also equipped with multiple 1/4''-20 threaded holes and a built-in cold shoe mount for attaching other devices, such as a microphone, LED light, etc.
- Cushioning to Protect Gear It perfectly fits the top of FX3 / FX30 XLR Handle with built-in cushions for full protection
- Aluminum & Stainless Steel Construction Weights only 65g, the top plate features a compact design, and it is made of lightweight aluminum alloy and stainless steel, scratch-resistant
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 1.85 x 3.74 x 1.61 inches | Weight: 0.14 pounds
Warranty: 2-Year Warranty (1-Year for Electronic Products)
See On Amazon #6
SmallRig V-Mount Battery Plate, V Lock Battery Mounting Plate with 1/4"-20 & 3/8"-16 Threaded Holes, L-Shape Compact & Foldable Tool-Free V Mount Battery Plate for DSLR Camera, Gimbals & Tripod - 4505
Asin: B0CQM164ZH
Widely Compatibility: This V-Mount Battery Plate Is Very Versatile And Universal, It Is Suitable For Most Camera Models On The Market, For Mirrorless / Dslr Cameras Less Than 111Mm Thick, Like For Sony Alpha 7R V / Alpha 7 Iv / Alpha 7S Iii / Alpha 7C / Fx3 / Fx30, For Canon Eos R5c / R5 / R6 / R6 Mark Ii / R7 / R10 / R / Rp , For Panasonic Lumix S1h / S1r / S1 / S5 / S5 Ii / Gh6 / Gh5..
Expand Your Creativity: The Built-In 1/4"-20 And 3/8"-16 Threaded Holes On The Bottom Enable To Mount The Quick Release Plate You Need, Such As For Arca-Swiss And For Manfrotto Etc..
Note: This Is The Lite Version Of Smallrig V-Mount Battery Plate. Quick Release Plate For Arca-Swiss And Mini V-Mount Plate Are Not Included In The Packing List..
Smart Rotatable Design: The V-Mount Plate Can Be Rotated And Adjusted By 180°. Adjust Forward For Convenient Storage, Adjust Backward For Enough Space To Open The Camera Flip Screen. This Rotating Design Does Not Require You To Remove The Battery First, Which Effectively Saves Time. And It Also Features Pivot Damping To Prevent Equipment From Falling..
Stretchable Baseplate: The Baseplate Of This V-Mount Battery Plate Is Stretchable, And The Maximum Stretchable Distance Is 36.5 Mm / 1.43 Inch, Which Meets The Needs Of Cameras Of Different Sizes And Improves The Compatibility. Locking And Releasing The Rod Is Realized By A Toggle Lock, Which Is Fast And Time-Saving Without The Needs Of Tools..
Features
- Versatile and Compact Design: SmallRig V-mount battery plate 4505 adopts L-shaped design, which integrates V-mount battery plate, stretchable rod, 1/4"-20 and 3/8"-16 threads to realize quick installation and adjustment of camera and battery. The built-in mount clamp for Arca supports any SmallRig cages with QR plate for Arca. Folding and lightweight design, only 113.5 mm x 30 mm, 199g, easy to store and carry round.
- Stretchable Baseplate: The baseplate of this V-mount battery plate is stretchable, and the maximum stretchable distance is 36.5 mm / 1.43 inch, which meets the needs of cameras of different sizes and improves the compatibility. Locking and releasing the rod is realized by a toggle lock, which is fast and time-saving without the needs of tools.
- Widely Compatibility: This V-mount battery plate is very versatile and universal, it is suitable for most camera models on the market, for Mirrorless / DSLR cameras less than 111mm thick, like for Sony Alpha 7R V / Alpha 7 IV / Alpha 7S III / Alpha 7C / FX3 / FX30, for Canon EOS R5C / R5 / R6 / R6 Mark II / R7 / R10 / R / RP , for Panasonic LUMIX S1H / S1R / S1 / S5 / S5 II / GH6 / GH5.
- Smart Rotatable Design: The V-Mount plate can be rotated and adjusted by 180 . Adjust forward for convenient storage, adjust backward for enough space to open the camera flip screen. This rotating design does not require you to remove the battery first, which effectively saves time. And it also features pivot damping to prevent equipment from falling.
- Expand Your Creativity: The Built-in 1/4-20 and 3/8-16 threaded holes on the bottom enable to mount the quick release plate you need, such as for Arca-Swiss and for Manfrotto etc.
- NOTE: This is the Lite Version of SmallRig V-mount battery plate. Quick release plate for Arca-Swiss and mini V-mount plate are not included in the packing list.
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 1.18 x 4.47 x 3.60 inches | Weight: 0.44 pounds
Warranty: 2-Year Warranty (1-Year for Electronic Products)
See On Amazon #7
SmallRig FX3 / FX30 XLR Handle Extension Rig for Sony - MD3490
Asin: B09DFND521 | Model: 3490-CF | PartNumber: 3490-CF
【Quick Release Nato Rail】The Handle Extension Rig Is Equipped With A Nato Rail, Which Is Installed On The Top Of The Fx3 / Fx30 Xlr Handle By Two 1/4"-20 Screws. It Provides More Accessory Installation Interfaces For Shooting Scenes So That You Can Quickly Install Or Release Monitors, Evf, Etc..
【Comfortable & Durable Design】The Extension Rig Features Beautiful And Practical Ergonomic Design, And It Is Made Of Super Tough And Lightweight Aluminum Alloy, Anti-Oxidation, Scratch-Resistant..
【Power Backup Solution】Smallrig Np-Fz100 Camera Battery Charger Set Is Available Now, Two 2040Mah(Real) Rechargeable Batteries And A Charger Brings Long Battery Life For Your Videos And Photos Shooting, If You Need A Sufficient Power Supply, Please Search Smallrig Np-Fz100 Battery 3824.
【Multiple Mounting Threads】The Extension Rig Has A Cold Shoe, Multiple 1/4"-20, 3/8"-16 Screws And Locating Holes For Arri Standard, So It Can Provide Multiple Accessory Mounting Interfaces For Shooting..
【30Mm Handle Extension】The Handle Extension Rig Is Installed At The End Of The Fx3 / Fx30 Xlr Handle By A 1/4"-20 Screw, Which Can Extend The Handle Back By 30Mm..
Features
- FOR SONY FX3 / FX30 XLR SmallRig FX3 / FX30 XLR Handle Extension Rig 3490 is designed to extend the length of the FX3 / FX30 XLR handle and add more accessory mounting interfaces.
- 30mm HANDLE EXTENSION The handle extension rig is installed at the end of the FX3 / FX30 XLR handle by a 1/4-20 screw, which can extend the handle back by 30mm.
- QUICK RELEASE NATO RAIL The handle extension rig is equipped with a NATO rail, which is installed on the top of the FX3 / FX30 XLR handle by two 1/4-20 screws. It provides more accessory installation interfaces for shooting scenes so that you can quickly install or release monitors, EVF, etc.
- MULTIPLE MOUNTING THREADS The extension rig has a cold shoe, multiple 1/4-20, 3/8-16 screws and locating holes for ARRI standard, so it can provide multiple accessory mounting interfaces for shooting.
- COMFORTABLE & DURABLE DESIGN The extension rig features beautiful and practical ergonomic design, and it is made of super tough and lightweight aluminum alloy, anti-oxidation, scratch-resistant.
- Power Backup Solution SmallRig NP-FZ100 camera battery charger set is available now, two 2040mAh(Real) rechargeable batteries and a charger brings long battery life for your videos and photos shooting, if you need a sufficient power supply, please search SmallRig NP-FZ100 Battery 3824
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 1.33 x 4.68 x 1.10 inches | Weight: 0.20 Pounds
See On Amazon #8
SmallRig Camera Cage for Sony ZV-1 II/ZV-1F / ZV-1 Camera, with Silicone Gel Grip, Cold Shoe Mount - 2938
Asin: B08HCM7ZHL | Model: 2938-SR | PartNumber: 2938-SR
【Comfortable Shooting】On The Front Of The Cage Features Anti-Slip Silicone Gel Coverings To Provide A Comfortable Handheld Shooting. Optional Cable Clamp 1693 Is Provided And Allows Protecting The Cable For Hdmi. (Note: When Using The Cable Clamp 1693, Please Clamp The Cable For Hdmi & Rubber Cover Together.).
【Sweet Design】The Zv1 Cage Features Rubber Pads On The Bottom To Protect Your Camera Body And Prevent Scratching. Additionally, The Cage Provides A Strap Slot On Each Side For Carrying Straps. Also, An Allen Wrench Is Included To Enable You To Tighten And Loosen The Screws Quickly..
【Related Product】If You Would Like To Control Your Camera By Remote, You Could Search "Smallrig Sr-Rg1 Remote Shooting Grip 3326".
【Multiple Mounting Points】The Cage Features Multiple 1/4"-20 Threaded Holes On Top For Extra Cold Shoe Mount 2044 And Mini Top Handle 2821. The Bottom Of The Cage Is Not Only Features A Shoe Mount On The Bottom For A Light Or Microphone, But Also Features Multiple 1/4"-20 Threads Allow The Battery And Card Changes Without Unscrewing A Shooting Handle Or A Tripod..
【Button Accessible】Smallrig Cage 2938 Does Not Block The Access To Your Camera's Functions, Displays, Ports, Or Battery When Attaching A Handle Or Tripod. You Can Attach The Tripod To The Right Side Of The Cage To Shoot Vertically For Tiktok..
Features
- FORMFITTING FULL CAGE SmallRig Cage 2938 is exclusively designed for Sony ZV-1 II / ZV-1F / ZV-1 Camera. As a formfitting full cage, it is designed to provide protection, accessory mounts and a comfort grip for your ZV-1 II / ZV-1F / ZV-1 camera. The camera mounts onto the cage via a front lens ring clamp that securely holds the camera.
- BUTTON ACCESSIBLE SmallRig cage 2938 DOES NOT block the access to your camera's functions, displays, ports, or battery when attaching a handle or tripod. You can attach the tripod to the right side of the cage to shoot vertically for TikTok.
- COMFORTABLE SHOOTING On the front of the cage features anti-slip silicone gel coverings to provide a comfortable handheld shooting. Optional Cable Clamp 1693 is provided and allows protecting the cable for HDMI. (Note: When using the cable clamp 1693, please clamp the cable for HDMI & rubber cover together.)
- MULTIPLE MOUNTING POINTS The cage features multiple 1/4-20 threaded holes on top for extra Cold Shoe Mount 2044 and Mini Top Handle 2821. The bottom of the cage is not only features a shoe mount on the bottom for a light or microphone, but also features multiple 1/4-20 threads allow the battery and card changes without unscrewing a shooting handle or a tripod.
- SWEET DESIGN The ZV1 cage features rubber pads on the bottom to protect your camera body and prevent scratching. Additionally, the cage provides a strap slot on each side for carrying straps. Also, an Allen wrench is included to enable you to tighten and loosen the screws quickly.
- Related Product If you would like to control your camera by remote, you could search SmallRig SR-RG1 Remote Shooting Grip 3326
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 4.69 x 2.93 x 1.50 Inches | Weight: 0.23 pounds
See On Amazon #9
SmallRig Cage Kit w/Cable Clamp for Sony Alpha 7R V/Alpha 7 IV/Alpha 7S III, Camera Cage w/Multiple Accessory Mounting Points, Built-in Quick-Release Plate for Arca-Swiss - 4308
Asin: B0C7VH3211 | Model: 4308-SR | PartNumber: 4308-SR
Anti-Deflection: It Is Stable And Anti-Deflection Because The Cage Locks The Camera Firmly Via A Locating Pin, A 1/4"-20 Screw At The Bottom And A M2.5 Screw At The Left Of The Cage. And A Magnetic Wrench Is Included For Easy Disassembly And Assembly. Note: Please Remove The Left Split D-Ring Before Installing The Side Lock Adapter..
Quick Release Plate For Arca-Swiss: The Bottom Of The Cage Features Quick Release Plate For Arca-Swiss, So It Enables Quick Switch Between Tripod And Gimbal ( For Dji Rs 2 / Rsc 2 / Rs 3 / Rs 3 Pro) Shooting. And It's Also Compatible With Quick-Release Plate Of Stabilizer (Height Increase Pad) For Dji Rs 2 / Rsc 2 And Quick Release Plate For Arca-Type 3154..
New Streamlined Design: The Formfitting Cage With A New Streamlined Design Gives Full Access To Buttons And Ports. And It Also Features Strap Slots On Both Sides And The Bottom, Compatible With Hand Strap 3848, Shoulder Strap Psc2428, Etc..
Multiple Accessory Mounting Points: The Cage Is Equipped With Several 1/4"-20 Threaded Holes For Top Handle 2165C, Side Handle 2093C, And One 3/8"-16 Locating Holes For Arri On The Top For Monitor Mount 2903B, Built-In Cold Shoe Mount For Microphone And Led Video Light..
Features
- Compatibility: SmallRig cage kit for Sony Alpha 7R V / Alpha 7 IV / Alpha 7S III 4308 is designed to attach accessories and protect the camera. And the dedicated cable clamp protects the interfaces to ensure stable signal transmission. Note: cable clamp interferes with the interface of the synchronous terminal when used on the Alpha 7R V camera.
- Multiple Accessory Mounting Points: The cage is equipped with several 1/4-20 threaded holes for top handle 2165C, side handle 2093C, and one 3/8-16 locating holes for ARRI on the top for monitor mount 2903B, built-in cold shoe mount for microphone and LED video light.
- Anti-Deflection: It is stable and anti-deflection because the cage locks the camera firmly via a locating pin, a 1/4-20 screw at the bottom and a M2.5 screw at the left of the cage. And a magnetic wrench is included for easy disassembly and assembly. Note: please remove the left split D-ring before installing the side lock adapter.
- New Streamlined Design: The formfitting cage with a new streamlined design gives full access to buttons and ports. And it also features strap slots on both sides and the bottom, compatible with hand strap 3848, shoulder strap PSC2428, etc.
- Quick Release Plate for Arca-Swiss: The bottom of the cage features quick release plate for Arca-Swiss, so it enables quick switch between tripod and gimbal ( for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro) shooting. And it's also compatible with quick-release plate of stabilizer (height increase pad) for DJI RS 2 / RSC 2 and quick release plate for Arca-Type 3154.
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 4.25 x 6.35 x 2.80 inches | Weight: 0.40 pounds
Warranty: 2-Year Warranty (1-Year for Electronic Products)
See On Amazon #10
SMALLRIG Camera A6400 A6100 Cage for Sony A6400 A6100 Camera - CCS2310
Asin: B07Q72B997 | Model: 2310 | PartNumber: 2310 | Ean: 6972070626388
【Mounting Options】Features 1/4’’ & 3/8’’ Threaded Holes, And 3/8’’ Locating Holes For Arri Standard, Allowing You To Attach More Accessories, Such As Cold Shoe 2044. The Thread Holes On The Bottom Of The Cage Enables You To Attach The Cage To Tripod. Optional Cable Clamp 1693 Is Provided And Allows Protecting The Cable For Hdmi.
【Power Backup Solution】Smallrig Np-Fw50 Camera Battery Charger Set Is Available Now, Two 1030Mah(Real) Rechargeable Batteries And A Charger Brings Long Battery Life For Your Videos And Photos Shooting, If You Need A Sufficient Power Supply, Please Search Smallrig Np-Fw50 Battery 3818.
【Built-In Flat Screw Driver】There Is A Flat Screw Driver Absorbed On The Bottom Of The Cage, Which Enables You To Tighten And Loosen The Screws Quickly.
【Perfect Protection】Secured Tightly Via A 1/4’’ Screw On The Bottom And A M2.5 Screw On The Side To Prevent The Camera From Twisting. Rubber Pads On The Bottom Protect Your Camera Body From Scratching.
Features
- HIGH CUSTOMIZATION The cage is exclusively designed to provide protection and mounting options for Sony A6400 A6100 users especially for V-loggers, also compatible with Sony A6300/A6500. It would not block any buttons on the camera and you are able to access not only the battery but even the SD card slot
- PERFECT PROTECTION Secured tightly via a 1/4 screw on the bottom and a M2.5 screw on the side to prevent the camera from twisting. Rubber pads on the bottom protect your camera body from scratching
- MOUNTING OPTIONS Features 1/4 & 3/8 threaded holes, and 3/8 locating holes for ARRI standard, allowing you to attach more accessories, such as cold shoe 2044. The thread holes on the bottom of the cage enables you to attach the cage to tripod. Optional Cable Clamp 1693 is provided and allows protecting the cable for HDMI
- BUILT-IN FLAT SCREW DRIVER There is a flat screw driver absorbed on the bottom of the cage, which enables you to tighten and loosen the screws quickly
- Power Backup Solution SmallRig NP-FW50 camera battery charger set is available now, two 1030mAh(Real) rechargeable batteries and a charger brings long battery life for your videos and photos shooting, if you need a sufficient power supply, please search SmallRig NP-FW50 Battery 3818
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 3.35 x 5.39 x 1.93 inches | Weight: 0.31 pounds
See On Amazon #11
SmallRig Threaded Side Handle with Record Start/Stop Remote Trigger with 3 Control Cable for Sony Cameras, for Panasonic Cameras, for Fujifilm Cameras, for Z CAM Cameras 3323
Asin: B09B7FYXZB | Model: 3323-CF | PartNumber: 3323-CF
【3 Control Cables Included】The Handle Kit Includes 3 Different Control Cables (1 X For Sony Control Cable, 1 X For Fujifilm/For Panasonic Control Cable, 1 X For Panasonic/For Z Cam Control Cable). Different Cameras Correspond To Different Control Cables.
【Ergonomical Design】Ergonomically Designed, All-In-One Wood Handle Improves Grip Experience. The Side Handle Can Be Adjusted Up And Down Based On Your Needs. (Longer Cable 3407 Is Sold Separately To Your Shoulder Kit For Sony Cameras).
【Multiple Mountings】Its Top Features 1/4"-20, 3/8"-16 Threaded Holes, And A Cold Shoe For Monitor Mount 2904 And 2905. With The Allen Wrench Built-In On The Top Of The Wooden Handle, It Is Easy To Re-Tighten The Thumbscrews For Security.
【Remote Control】The Top Handle Features A Top-Mounted Start/Stop Record Button Placed Where Your Thumb Would Normally Rest. It Provides Convenient Record Start/Stop Control For A Stable And Comfortable Shooting Experience.
Features
- FOR SELECTED CAMERAS SmallRig 3323 is a Thread Top Handle with Record Start/Stop Remote Trigger for Selected Cameras. It is equipped with three control cables, supporting for Sony A7/A7R/A7S/A7II/A7RII/A7SII/ A7SIII/FX3/FX30/A7III/A7RIII / A7R V / A7 IV / A7R IV/A9/A9 II/A5100/A6000/A6100/A6300/A6400/A6500/A6600/RX100 III/RX100IV/RX100V/RX100 VI/RX100 VII, for FUJIFILM X-T3/X-T4/X-T5/X-T20/X-T30, for Panasonic S5/S1/S1R/S1H/BS1H/GH4/GH5/GH5S/GH6/G9/G95, and for Z CAM E2-M4/ E2- S6/BGH1
- REMOTE CONTROL The top handle features a top-mounted start/stop record button placed where your thumb would normally rest. It provides convenient record start/stop control for a stable and comfortable shooting experience
- 3 CONTROL CABLES INCLUDED The handle kit includes 3 different control cables (1 x for Sony control cable, 1 x for Fujifilm/for Panasonic control cable, 1 x for Panasonic/for Z CAM control cable). Different cameras correspond to different control cables
- MULTIPLE MOUNTINGS Its top features 1/4-20, 3/8-16 threaded holes, and a cold shoe for Monitor Mount 2904 and 2905. With the allen wrench built-in on the top of the wooden handle, it is easy to re-tighten the thumbscrews for security
- ERGONOMICAL DESIGN Ergonomically designed, all-in-one wood handle improves grip experience. The side handle can be adjusted up and down based on your needs. (Longer Cable 3407 is sold separately to your shoulder kit for Sony cameras)
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SmallRig
Dimensions: 4.02 x 2.80 x 3.11 inches | Weight: 0.49 pounds
See On Amazon #12
SMALLRIG Quick Release Plate for AirTag, Mount Plate for Arca-Type Compatible with Selected Camera - MD4150
Asin: B0BTP78VH7
【Compatible With Selected Cameras】The Plate 4150 Is Suitable For Sony Alpha 7S Iii/ Alpha 7R Iii /Alpha 7 Iii / Alpha 7R Iv / Alpha 7 Iv / Alpha 7C / Fx30 / Fx3 / Zv-E10, For Canon For Eos R5 / R5 C / R6 / R7 / R10, For Nikon Z 5 / Z 6 / Z 7 / Z 6Ii / Z 7Ii / Z 9, For Panasonic Gh5 / Gh5ii / Gh5s / Gh6 / S5..
【Eva Anti-Vibration Pad】The Mounting Compartment For Airtag Has Built-In Eva Pad To Protect The Your Device And Prevent Noise During Movement. Also, The Hole On The Side Of The Smallrig Plate For Airtag Can Enhance The Proximity Tracking Distance..
【Important Note】1. After Attached, Use The App "Find My" To Track Your Device Up To 10 Meters Via Bluetooth Proximity. 2. After Attached, Use The App "Find My" To Track Your Device Up To 100 Meters Or More. 3. Package Only Includes The Mount Plate For Airtag..
【Bottom Structure】The Bottom Of This Plate Has Three Built-In 1/4"-20 Threaded Holes, Which Can Be Attached To Tripod Heads, Quick Release Plates, Or More To Achieve Different Setup In Different Scenes. Also, It Features A Strap Loop To Be Compatible With Separately Available Wrist Straps..
【M2.5 Screw Cover Mount】Using Sturdy M2.5 Screws To Prevent Your Device For Airtag From Being Removed Quickly, So As To Maximize The Possibility Of Finding Your Camera. Please Note: Recommend Replacing The Torx Screws With New Ones After Using Them Many Times..
Features
- Designed for AirTag SmallRig QR Mount Plate MD4150 only for AirTag is attached to the bottom of your camera via one 1/4"-20 screw and it is designed with a sleek hidden compartment to effectively conceal your device to easily track a camera's location. The quick release plate also has a built-in plate for Arca-Swiss, which can be quickly connected to tripods and other accessories for shooting.
- M2.5 Screw Cover Mount Using sturdy M2.5 screws to prevent your device for Airtag from being removed quickly, so as to maximize the possibility of finding your camera. Please Note: Recommend replacing the Torx screws with new ones after using them many times.
- Compatible with Selected Cameras The plate 4150 is suitable for Sony Alpha 7S III/ Alpha 7R III /Alpha 7 III / Alpha 7R IV / Alpha 7 IV / Alpha 7C / FX30 / FX3 / ZV-E10, for Canon for EOS R5 / R5 C / R6 / R7 / R10, for Nikon Z 5 / Z 6 / Z 7 / Z 6II / Z 7II / Z 9, for Panasonic GH5 / GH5II / GH5S / GH6 / S5.
- Bottom Structure The bottom of this plate has three built-in 1/4-20 threaded holes, which can be attached to tripod heads, quick release plates, or more to achieve different setup in different scenes. Also, it features a strap loop to be compatible with separately available wrist straps.
- EVA Anti-Vibration Pad The mounting compartment for AirTag has built-in EVA pad to protect the your device and prevent noise during movement. Also, the hole on the side of the SmallRig plate for AirTag can enhance the proximity tracking distance.
- Important Note 1. After attached, use the APP Find My to track your device up to 10 meters via Bluetooth proximity. 2. After attached, use the APP Find My to track your device up to 100 meters or more. 3. Package ONLY includes the mount plate for AirTag.
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SmallRig
Dimensions: 0.47 x 2.99 x 1.50 inches | Weight: 0.11 pounds
See On Amazon #13
SmallRig Half Cage for Sony Alpha 6700/6600 / 6500/6400, Built-in Quick Release Plate for Arca-Type, Camera Video Cage with Shoe Mount, 1/4''-20 & 3/8''-16 Threaded Holes - 4337
Asin: B0CF9K64BG
Two-Points Locking: The Half Cage 4337 Locks The Camera Via One 1/4"-20 Screw And One M2.5 Screw, Which Maintains Full Access To Its Ports, Controls, And Battery Door And Provides Protection For Your Handheld Camera Rig. Note: Please Remove The Strap Ring On The Left Side Of The Camera Before Installing This Half Cage. Please Refer To User Manual For Installation..
Integrated Swiss Plate For Arca: Integrated Swiss Quick Release Plate For Arca Facilitates Fast Switching Between Handheld, Tripods Or Gimbals For Dji Rs 2 / Rsc 2 / Rs 3 / Rs 3 Pro Shooting Modes..
Note: When This Product Mounted On For Sony A6600 / A6500 / A6400, It Is Incompatible With For Sony Hvl-F32m And Ecm-W2bt.
Multiple Mounting Points: There Are Multiple Mounting Points For Accessories, Including 1/4"-20 Holes And 3/8"-16 Locating Holes For Top Handle 3765, Side Handle 2913; One Top 3/8"-16 Locating Hole For Monitor Mount 2903B; Cold Shoes For Microphone, Led Video Light; A Nato Rail For Rotating Nato Handle (Left Side) 3260; And A Bottom Qd Socket For Attaching Shoulder Straps..
Excellent Handgrip Feeling: This Product Not Only Fits The Camera Curve Seamlessly But Also Maintains The Overall Original Handgrip Feeling. The Ergonomically Design Provides A Comfortable And Secure Hold On The Camera..
Features
- For Sony Alpha 6700 / 6600 / 6500 / 6400: SmallRig Half Cage 4337 is designed for Sony Alpha 6700 / 6600 / 6500 / 6400, which is lightweight and portable. The easy-to-use half cage gives full access to dials and buttons, with built-in cushions preventing scratches.
- Excellent Handgrip Feeling: This product not only fits the camera curve seamlessly but also maintains the overall original handgrip feeling. The ergonomically design provides a comfortable and secure hold on the camera.
- Two-Points Locking: The half cage 4337 locks the camera via one 1/4-20 screw and one M2.5 screw, which maintains full access to its ports, controls, and battery door and provides protection for your handheld camera rig. Note: Please remove the strap ring on the left side of the camera before installing this half cage. Please refer to user manual for installation.
- Multiple Mounting Points: There are multiple mounting points for accessories, including 1/4-20 holes and 3/8-16 locating holes for Top Handle 3765, Side Handle 2913; one top 3/8-16 locating hole for Monitor Mount 2903B; cold shoes for microphone, LED video light; a NATO rail for Rotating NATO Handle (Left Side) 3260; and a bottom QD socket for attaching shoulder straps.
- Integrated Swiss Plate for Arca: Integrated Swiss quick release plate for Arca facilitates fast switching between handheld, tripods or gimbals for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro shooting modes.
- Note: When this product mounted on for Sony A6600 / A6500 / A6400, it is Incompatible with for Sony HVL-F32M and ECM-W2BT
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 2.12 x 3.70 x 3.58 inches | Weight: 0.23 pounds
See On Amazon #14
SmallRig Handheld Cage Kit for Sony FX30 FX3 with XLR Handle Extension Rig, Wrist Strap and Clamp for HDMI Cable - 4184
Asin: B0BXP74CK5 | Model: 4184 | PartNumber: 4184
Quick Release Plate For Arca: The Qr Plate At The Bottom Is Compatible For Dji Rs 2, Rsc 2, Rs 3, Rs 3 Pro, Quick Release Plate (Height Increase Pad) And Plate For Arca 3154. Holes For Shoulder Straps And Wrist Straps Are Reserved On Both Sides And Bottom To Attach Wrist Strap 3848, Shoulder Strap Psc2428. The Bottom Qd Interface Is Compatible With Qd Shoulder Straps. The Built-In Magnetic Suction Wrench At The Bottom Is Convenient For Disassembly And Assembly..
Ergonomic Design: The Position Of The Battery Compartment Is Designed With An Opening And Closing Wrench, Which Fits The Curve Of The Fuselage Better, Solves The Problem Of Placing The Little Finger And Improves The Grip Feeling. There Are Built-In Protective Gaskets On The Contact Surface With The Camera Body To Prevent The Camera From Being Scratched..
Note: 1. Due To The Craftsmanship Of Manual Grinding Technology, This Is Normal Situation While There Are Slight Wear Trace On The Surface; 2. The Spacing Between The 1/4" Holes On The Top Slider Is 27Mm, So It Is Not Compatible With Accessories With A Spacing Of 18Mm. 3. When Using The Original Xlr Handle, Please Remove The Top Slider First..
Included Handle Extension, Wrist Strap And Cable Clamp: 1. The Xlr Handle Extension Adopts Ergonomic Design, Which Can Extend The Xlr Handle By 30Mm, Which Improves The Grip Feeling And Increases The Mounting Points. 2. The Wrist Strap Improves The Stability Of Handheld Shooting And Prevents The Device From Slipping During Handheld Shooting. 3. Equipped With A Dedicated Clamp For Hdmi Cable To Protect Interface To Ensure The Signal Stability During Shooting..
Multiple Mounting Points: The Cage Includes 1/4"-20 Holes To Attach Magic Arm 3873; The Locating Hole For Arri Can Attach Top Handle 3765/2165C Or Monitor Mount 2903B; The Side Nato Rail Can Attach Side Handle 3813; The 1/4”-20 Positioning Holes On The Upper Left Corner And Left Side Can Attach Rod Clamp 3598 For Follow Focus; Two 1/4”-20 Holes On The Side Can Attach Quick Release Plate To Prevent Deflection When Shooting Vertically; Built-In Cold Shoe Can Attach Microphones, Led Video Lights..
Features
- Designed for Sony FX30 / FX3: The FX30 / FX3 handheld cage kit adopts modular design, including a top slider module and a U-shaped cage module. The top slider module is fixed by two 1/4"-20 screws, and can be compatible with the original XLR after disassembly; the U-shaped cage module is fixed by 1/4"-20 screws on both sides and the bottom, which is stable and does not deflect. The kit includes a cage, clamp for HDMI cable , XLR handle extension and wrist strap.
- Multiple Mounting Points: The cage includes 1/4-20 holes to attach Magic Arm 3873; the locating hole for ARRI can attach Top Handle 3765/2165C or Monitor Mount 2903B; the side NATO rail can attach Side Handle 3813; the 1/4 -20 positioning holes on the upper left corner and left side can attach Rod Clamp 3598 for follow focus; two 1/4 -20 holes on the side can attach quick release plate to prevent deflection when shooting vertically; built-in cold shoe can attach microphones, LED video lights.
- Quick Release Plate for Arca: The QR plate at the bottom is compatible for DJI RS 2, RSC 2, RS 3, RS 3 Pro, quick release plate (height increase pad) and plate for Arca 3154. Holes for shoulder straps and wrist straps are reserved on both sides and bottom to attach Wrist Strap 3848, Shoulder Strap PSC2428. The bottom QD interface is compatible with QD shoulder straps. The built-in magnetic suction wrench at the bottom is convenient for disassembly and assembly.
- Included Handle Extension, Wrist Strap and Cable Clamp: 1. The XLR handle extension adopts ergonomic design, which can extend the XLR handle by 30mm, which improves the grip feeling and increases the mounting points. 2. The wrist strap improves the stability of handheld shooting and prevents the device from slipping during handheld shooting. 3. Equipped with a dedicated clamp for HDMI cable to protect interface to ensure the signal stability during shooting.
- Ergonomic design: The position of the battery compartment is designed with an opening and closing wrench, which fits the curve of the fuselage better, solves the problem of placing the little finger and improves the grip feeling. There are built-in protective gaskets on the contact surface with the camera body to prevent the camera from being scratched.
- Note: 1. Due to the craftsmanship of manual grinding technology, this is normal situation while there are slight wear trace on the surface; 2. The spacing between the 1/4 holes on the top slider is 27mm, so it is not compatible with accessories with a spacing of 18mm. 3. When using the original XLR handle, please remove the top slider first.
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SmallRig
Dimensions: 2.60 x 6.26 x 3.98 inches | Weight: 0.43 pounds
Warranty: 2-Year Warranty (1-Year for Electronic Products)
See On Amazon #15
SmallRig Camera Cage only for Sony A6000 A6300 ILCE-6000 ILCE-6300 NEX7, A6000 Cage with 1/4" 3/8" Mounting Points and Built-in Cold Shoe - 1661
Asin: B0185IAYZY | Model: 1661 | PartNumber: 1661
【Various Mounting Points】The Built-In Shoe Mount Is Used To Connect Light Accessories, Such As A Microphone, Evf Mount And More. A 1/4’’-20 Threaded Hole At The Front Enables It To Attach To 15Mm Micro Rod With 1/4'' Thread 915 For Follow Focus..
【Related Products】Smallrig Np-Fw50 Camera Battery Charger Set Is Available Now, Two 1030Mah(Real) Rechargeable Batteries And A Charger Bring Long Battery Life For Your Videos And Photo Shooting, If You Need A Sufficient Power Supply, Please Search Smallrig Np-Fw50 Battery 3818. You Could Go For "Smallrig 1638" Or "Smallrig 2916" For A Handle..
【Rubber Cushion】The Cage Features Rubber Cushions On The Bottom, Which Increases Friction To Prevent The Camera From Twisting And Scratching..
【Cold Shoe Adapter】The A6300 / A6000 Cage Features A Built-In Cold Shoe For Attaching A Microphone, Articulating Arm, Or Other Light Accessories.
Features
- For A6300/A6000 The SmallRig Cage 1661 is a formfitting aluminum exoskeleton that protects your camera and offers mounting options to attach accessories. With the camera in the cage, you still have access to the SD card slot, battery compartment, and all camera controls.
- Cold shoe adapter The A6300 / A6000 cage features a built-in cold shoe for attaching a microphone, articulating arm, or other light accessories
- Various Mounting Points The built-in shoe mount is used to connect light accessories, such as a microphone, EVF mount and more. A 1/4 -20 threaded hole at the front enables it to attach to 15mm Micro Rod with 1/4'' Thread 915 for follow focus.
- Rubber cushion The cage features rubber cushions on the bottom, which increases friction to prevent the camera from twisting and scratching.
- Related Products SmallRig NP-FW50 camera battery charger set is available now, two 1030mAh(Real) rechargeable batteries and a charger bring long battery life for your videos and photo shooting, if you need a sufficient power supply, please search SmallRig NP-FW50 Battery 3818. You could go for SmallRig 1638 or SmallRig 2916 for a handle.
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 1.93 x 5.39 x 3.43 inches | Weight: 0.35 pounds
See On Amazon #16
SmallRig A7 IV Cage with Top Handle, Clamp for HDMI Cable and Side Handgrip, Advanced Kit for Sony Alpha 7R V/Alpha 7 IV/Alpha 7S III - 3710
Asin: B0C2CKWTNH | Model: 3710-AU | PartNumber: 3710-AU
【New Streamlined Design】It Is Stable And Anti-Deflection Because The Cage Locks The Camera Firmly Via A Locating Pin, A 1/4"-20 Screw At The Bottom And A M2.5 Screw At The Left Of The Cage. The Formfitting Cage With A New Streamlined Design Gives Full Access To Buttons And Ports. And The Dedicated Clamp For Hdmi Cable Protects The Interfaces To Ensure Stable Signal Transmission..
【Quick Release Plate For Arca-Swiss 】The Bottom Of The Cage Features Quick Release Plate For Arca-Swiss, So It Enables Quick Switch Between Handheld, Tripod And Gimbal ( For Dji Rs 2 / Rsc 2 / Rs 3 / Rs 3 Pro) Shooting..
【Lightweight And Portable】The Cage Kit Is Lightweight And Portable Because It Is Made Of Lighter Carbon Fiber, So More Suitable For Long Time Handheld Shooting. The Top Handle Grip Is Comfortable And Convenient For Camera Moving And Low Angle Shooting. The Side Handle, Made Of Light Carbon Fiber And Pu Leather, Makes For A Pleasant And Firm Grip..
【Multiple Accessory Mounting Points】The Cage, Top Handle And Side Handle Equipped With Several 1/4"-20 Threaded Holes For Ball Heads Magic Arm 3873, Cold Shoes For Microphone, Led Video Light, And Several 3/8"-16 Locating Holes For Arri For Mini Side Handle 2914. Also, The Nato Rail Can Add Versatility To The Cage..
Features
- Compatibility SmallRig Advanced Kit 3710 is designed for Sony Alpha 7R V / Alpha 7 IV / Alpha 7S III. It includes a cage, a top handle, a side handle and a clamp for HDMI cable. The advanced kit can reduce burdens on arms when handheld shooting and increase stability.
- Multiple Accessory Mounting Points The cage, top handle and side handle equipped with several 1/4-20 threaded holes for Ball Heads Magic Arm 3873, cold shoes for microphone, LED video light, and several 3/8-16 locating holes for ARRI for Mini Side Handle 2914. Also, the NATO rail can add versatility to the cage.
- New Streamlined Design It is stable and anti-deflection because the cage locks the camera firmly via a locating pin, a 1/4-20 screw at the bottom and a M2.5 screw at the left of the cage. The formfitting cage with a new streamlined design gives full access to buttons and ports. And the dedicated clamp for HDMI cable protects the interfaces to ensure stable signal transmission.
- Lightweight and Portable The cage kit is lightweight and portable because it is made of lighter carbon fiber, so more suitable for long time handheld shooting. The top handle grip is comfortable and convenient for camera moving and low angle shooting. The side handle, made of light carbon fiber and PU leather, makes for a pleasant and firm grip.
- Quick Release Plate for Arca-Swiss The bottom of the cage features quick release plate for Arca-Swiss, so it enables quick switch between handheld, tripod and gimbal ( for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro) shooting.
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 7.09 x 8.51 x 5.87 inches | Weight: 1.03 pounds
Warranty: 2-Year Warranty (1-Year for Electronic Products)
See On Amazon #17
SMALLRIG Cage for Sony Alpha A6600/ILCE 6600 Mirrorless Camera with Cold Shoe Mounts - CCS2493
Asin: B083QHKJJL | Model: CCS2493-SR | PartNumber: CCS2493-SR | Ean: 6972070628542
【Mounting Options】Featuring Multiple 1/4”-20, 3/8”-16 And Locating Holes For Arri That Allows To Mount A Top Handle 1638, Monitor Mount Bse2294 And Magic Arm 2070..
【Built-In Flat Screw Driver】The Bottom Comes With A Flat-Head Screw Driver For Quick Installation. Optional Cable Clamp For Hdmi 1693 And Lens Adapter Support 1787 Are Sold Separately If Needed..
【Power Backup Solution】Smallrig Np-Fz100 Camera Battery Charger Set Is Available Now, Two 2040Mah(Real) Rechargeable Batteries And A Charger Brings Long Battery Life For Your Videos And Photos Shooting, If You Need A Sufficient Power Supply, Please Search Smallrig Np-Fz100 Battery 3824.
【Built-In Cold Shoe】The A6600 Cage Integrates With Two Cold Shoe Mounts With One On The Top And The Other On The Left For Microphone And Light. Additionally, The Cage Features Strap Slots On Both Sides For Carry Strap..
【Perfect Protection】Secured Tightly Via A 1/4’’ Screw On The Bottom And A M2.5 Screw On The Side To Prevent The Camera From Twisting. Rubber Pads On The Bottom Protect Your Camera Body From Scratching.
Features
- HIGH CUSTOMIZATION The a6600 cage is exclusively designed to provide protection and mounting options for Sony A6600 users especially for V-loggers. It would not block any buttons on the camera and you are able to access not only the battery but even the SD card slot
- PERFECT PROTECTION Secured tightly via a 1/4 screw on the bottom and a M2.5 screw on the side to prevent the camera from twisting. Rubber pads on the bottom protect your camera body from scratching
- MOUNTING OPTIONS Featuring multiple 1/4 -20, 3/8 -16 and Locating holes for ARRI that allows to mount a Top Handle 1638, Monitor Mount BSE2294 and Magic Arm 2070.
- BUILT-IN COLD SHOE The A6600 cage integrates with two cold shoe mounts with one on the top and the other on the left for microphone and light. Additionally, the cage features strap slots on both sides for carry strap.
- BUILT-IN FLAT SCREW DRIVER The bottom comes with a flat-head screw driver for quick installation. Optional Cable Clamp for HDMI 1693 and Lens Adapter Support 1787 are sold separately if needed.
- Power Backup Solution SmallRig NP-FZ100 camera battery charger set is available now, two 2040mAh(Real) rechargeable batteries and a charger brings long battery life for your videos and photos shooting, if you need a sufficient power supply, please search SmallRig NP-FZ100 Battery 3824
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 3.35 x 5.43 x 2.20 inches | Weight: 0.31 pounds
See On Amazon #18
SmallRig Noise-Reduction Windsheild Made of Nylon and Fiber, with Cold Shoe Adapter and Rubber Cushions for Nikon Z 30 - 3859
Asin: B0B5KSMHY4
With Cold Shoe Mount: There Is A Cold Shoe Mount On The Top Of The Adapter, Which Allows It To Be Compatible With Devices With Cold Shoe Mounts, Such As Smallrig Led Video Light 3405, P96 Led Video Light 3286..
Lightweight & Durable: The Furry Windshields Is Made Of Nylon And Fiber, Which Is Tough And Durable. In Addition, It Only Weighs 5G, Which Is Easy To Carry Out Everywhere..
Built-In Rubber Cushions: The Built-In Rubber Cushions On The Bottom Can Protect The Hot Shoe Of Your Camera And Ensure The Secure Installation..
Windproof & Noise-Reduction: It Is Designed With Selected Synthetic Fabric For Reducing Wind Noise In Outdoor Scenes, Which Brings You Crystal-Clear Audio Recordings And Superior Sound Quality..
Features
- Compability: The windshield is compatible for Nikon Z 30 ,for Sony FX3 / FX30. It can be used with SMALLRIG Baseplate for Nikon Z 30 3857, SMALLRIG Cage for Nikon Z 30 3858 and SMALLRIG L Bracket for Nikon Z 30 3860.
- Windproof & Noise-Reduction: It is designed with selected synthetic fabric for reducing wind noise in outdoor scenes, which brings you crystal-clear audio recordings and superior sound quality.
- With Cold Shoe Mount: There is a cold shoe mount on the top of the adapter, which allows it to be compatible with devices with cold shoe mounts, such as SMALLRIG LED Video Light 3405, P96 LED Video Light 3286.
- Built-in Rubber Cushions: The built-in rubber cushions on the bottom can protect the hot shoe of your camera and ensure the secure installation.
- Lightweight & Durable: The furry windshields is made of nylon and fiber, which is tough and durable. In addition, it only weighs 5g, which is easy to carry out everywhere.
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SmallRig
Dimensions: 2.00 x 7.00 x 4.00 inches | Weight: 0.01 pounds
See On Amazon #19
SmallRig Mounting Plate for Attaching FX30 / FX3 XLR Handle to Camera Cage 2999/3241 for Sony A7 SIII, Camera Cage 3667/3639 / 3594 for Sony A7 IV (A7M4) - MD4019
Asin: B0B9XGPW4W | Model: MD4019-SR | PartNumber: MD4019-SR
For Sony A7 Siii / A7 Iv (A7m4) Camera Cage: For Full Cage 2999 3241 3667 3594, The Plate Will Be Mounted On The Cage Via Two 1/4" Screws. For Half Cage 3639, The Plate Will Be Mounted On The Cage Via A 3/8" Screw On Th Center..
In The Box: 1X Adapter Plate (3/8" Screw And Two 1/4" Screws On The Plate) ; 1X Allen Wrench.
Compact Design: Fits The Camera Cage And Xlr Handle Perfectly And Do Not Block Other Mounting Points Other Than The Top Of The Camera Cage..
For Sony Fx30 / Fx3 Xlr Handle: The Plate Attaches To The Fx30 / Fx3 Xlr Handle Via Two 1/4" Threaded Holes..
Features
- Why You Need: You have a camera for Sony A7 SIII / A7 IV, and the camera cage 2999 / 3241 / 3667 / 3639 / 3594. Also, you want to mount the FX30 / FX3 XLR handle on the camera. Then the mounting plate MD4019 will help you make the handle more stable on the camera.
- For Sony FX30 / FX3 XLR Handle: The plate attaches to the FX30 / FX3 XLR handle via two 1/4 threaded holes.
- For Sony A7 SIII / A7 IV (A7M4) Camera Cage: For full cage 2999 3241 3667 3594, the plate will be mounted on the cage via two 1/4 screws. For half cage 3639, the plate will be mounted on the cage via a 3/8 screw on th center.
- Compact Design: Fits the camera cage and XLR handle perfectly and do not block other mounting points other than the top of the camera cage.
- In the Box: 1x Adapter Plate (3/8 screw and two 1/4 screws on the plate) ; 1x Allen Wrench
- See more on Amazon...
Brand: SMALLRIG | Manufacturer: SMALLRIG
Dimensions: 0.51 x 2.64 x 1.50 inches | Weight: 0.06 pounds
Warranty: 2-Year Warranty (1-Year for Electronic Products)
See On Amazon
Looking For Something Else?
Search