CNCEST Milling Machine Parts Motor Pinion Gear 92mm Gear & Hub ALSGS For AL-310S Servo Power Feed Model For Al-310s Servo Power Supply Model
Asin: B096FPGKZ4
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.This Is A High Quality 92Mm Gear And Wheel Alsgs.
Durable And Long-Lasting Protection. Perfect After-Sales Service Guarantee.
Suitable For Milling Machine Parts Of Al-310S Servo Power Feed Model.
The Gear Is Milled By A Precision External Milling Machine, And Good Machining Makes It Roll Smoothly.
Features
- Model: AL-310S; Outer diameter: 92mm; Inner hole: 8mm; Thickness: 16.5mm; Gross weight: 0.17kg; Net weight: 0.1kg
- The gear is milled by a precision external milling machine, and good machining makes it roll smoothly
- This is a high quality 92mm gear and wheel ALSGS
- Suitable for milling machine parts of AL-310S servo power feed model
- Durable and long-lasting protection. Perfect after-sales service guarantee
- See more on Amazon...
Brand: CNCEST | Manufacturer: CBDYQ-US
See On Amazon Similar To CNCEST Milling Machine Parts Motor
#1
Genmitsu CNC Router Machine 4040-PRO for Woodworking Metal Acrylic MDF Nylon Cutting Milling, GRBL Control, 3 Axis CNC Engraving Machine, Working Area 400 x 400 x 78mm (15.7 x 15.7 x 3.1 )
Asin: B0BKSJJS34 | Model: 4040-PRO | PartNumber: 4040-PRO | Ean: 0816550026243 | UPC: 816550026243
Still Based On Open-Source Grbl V1.1, The 4040-Pro Cnc Router Has Stepped Up To More Powerful But Silent Toshiba Tb6s109 Drivers With 32-Bit Chips. Upgrades Include Extended Function Ports Like A Dedicated 3 Pin Laser Port, Air Assistance Pump Port, And Mpg Port..
The 4040-Pro Cnc Machine Is Supplied With 42Mm And 52Mm Spindle Mounts. The Additional 65Mm (B0brzsy475), 69Mm (B0brzsvvk3) Spindle Mount, Laser Module, And Other Upgraded Accessories Are Available To Order. You Can Easily Upgrade The Machine According To Your Needs. If You Get Stuck, Check Out The Sainsmart Resource Centre (See User Guide) Or Contact Us With Any Questions You May Have..
It Supports Adding The 4Th-Axis Rotary Module Kit. The 4Th-Axis Kit Enables Your 4040-Pro Desktop Cnc To Carve From Different Angles And Positions Or With The Right Software Full 3D Rotary Caving..
All Main Parts Are Pre-Assembled And It Just Takes About 15 Minutes To Finish The Whole Machine Assembly. The Spoilboard Is Combined By Two Pieces Of Mdf Boards. Each Mdf Board Could Be Replaced Individually. You Don’T Need To Replace The Whole Spoilboard When A Panel Gets Damaged..
New Steel Hss Frame - All New Redesigned Frame Structure, Each Axis Is Composed Of Two 16Mm Steel Hss Linear Tubes And A Lead Screw Motion Drive, Dual Y Axis Rails, And All Metal Frame. This New High-Rigidity Structure Ensures The Stability And Accuracy Of The Milling Machine..
Features
- An effective working area of 15.7 x 15.7 x 3.1 is large enough for most daily wood carving projects. The redesigned Z-axis carriage makes swapping a spindle easier. Adding more screw holes on the non-all-in-one Z-axis carriage allows you to install the larger spindle higher for extra overfeed height.
- New Steel HSS Frame - all new redesigned frame structure, each axis is composed of two 16mm Steel HSS linear tubes and a lead screw motion drive, dual Y axis rails, and all metal frame. This new high-rigidity structure ensures the stability and accuracy of the milling machine.
- Still based on open-source Grbl v1.1, the 4040-PRO CNC router has stepped up to more powerful but silent Toshiba TB6S109 drivers with 32-bit chips. Upgrades include extended function ports like a dedicated 3 Pin Laser Port, Air Assistance Pump Port, and MPG Port.
- All main parts are pre-assembled and it just takes about 15 minutes to finish the whole machine assembly. The spoilboard is combined by two pieces of MDF boards. Each MDF board could be replaced individually. You don t need to replace the whole spoilboard when a panel gets damaged.
- The 4040-PRO CNC machine is supplied with 42mm and 52mm spindle mounts. The additional 65mm (B0BRZSY475), 69mm (B0BRZSVVK3) spindle mount, laser module, and other upgraded accessories are available to order. You can easily upgrade the machine according to your needs. If you get stuck, check out the SainSmart Resource Centre (see User Guide) or contact us with any questions you may have.
- It supports adding the 4th-axis rotary module kit. The 4th-axis kit enables your 4040-PRO desktop CNC to carve from different angles and positions or with the right software full 3D rotary caving.
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
See On Amazon #2
Genmitsu GS-775M 20000RPM 775 CNC Spindle Motor with 5mm ER11 Collet Set, CNC 3018 Upgraded Accessories, DC 24V, High Power, Noise Suppression, Electrical DC Motor for 3018 CNC Router Machine
Asin: B08DTHDSMV | Model: MR775 | PartNumber: MR775 | Ean: 0816550023723 | UPC: 816550023723
Pre-Installed Motor Noise Suppression Pcb Provides Enhanced Performance..
Double Ball Bearing Brush. Cw/Ccw Rotation..
It's Compatible With All 3018 Series Cnc Router. Applied To Lathes, Mills, Car Hoists, Pumps & Conveyors, Etc..
Experience A Quick And Easy Upgrade For Your Genmitsu Desktop Cnc..
Features
- DC: 24V. Speed: 20000/min.
- Experience a quick and easy upgrade for your Genmitsu Desktop CNC.
- Pre-installed motor noise suppression PCB provides enhanced performance.
- It's compatible with All 3018 Series CNC router. Applied to lathes, mills, car hoists, pumps & conveyors, etc.
- Double ball bearing brush. CW/CCW rotation.
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 1.03 Pounds
See On Amazon #3
CNCTOPBAOS 1610 PRO CNC Milling Machine,with GRBL Offline Controller,3 Axis Desktop DIY Mini CNC Router Kit Engrave Carving PVC,PCB,Acrylic,Wood Cutting Engraving Machine CNC1610 Pro
Asin: B08D6FQT5S | Model: 3018 | PartNumber: 3018 | Ean: 0619191628292 | UPC: 619191628292
【Spindle&Stepper Motor】Diameter 45Mm 10000 Rpm Maximum Power 120W; Er11-3.175Mm ( Can Be Replaced 0-7Mm ); Nema17 42 Stepper Motor 1.3A/0.3N.M.
【Grbl Software】Grbl Control (Candle); Parcel Include 1Pcs 4G Usb Flash Drive Which Contains User Manual & Grbl Software.
【Main Application】Can Be Engraved Plastic, Wood, Acrylic, Pvc, Pcb, Wood And The Like Material.Soft Metal Like Copper And Aluminum And Other Materials, But Can Not Carve Hard Metal, Jade Or Other Very Hard Texture Of The Items..
【Working Area】18X10x4.5Cm;Frame Size: 30X26x25cm;Type:Usb Port Desktop Cnc Router【System Requirements】 Windows Xp, Win7,Win8,Win10; Supporting Files:G-Code (.Nc/.Txt/.Tape/.Gcode).
Features
- Upgrade Version 1610 Pro with Offline controller Mini CNC machine small size, light weight, USB interface, GRBL control systems, great cnc router machine for beginers;The CNC1610 PRO machine is very easy to install,stable structure,our parcel also include english user manual.
- Working area 18x10x4.5cm;Frame size: 30x26x25cm;Type:USB port Desktop cnc router System requirements Windows XP, win7,win8,win10; Supporting files:G-code (.nc/.txt/.tape/.gcode)
- Spindle&Stepper Motor Diameter 45mm 10000 rpm maximum power 120W; ER11-3.175mm ( can be replaced 0-7mm ); Nema17 42 stepper motor 1.3A/0.3N.m
- Main application Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the like material.soft metal like copper and aluminum and other materials, but can not carve hard metal, jade or other very hard texture of the items.
- GRBL Software GRBL control (candle); Parcel include 1pcs 4G USB flash drive which contains user manual & GRBL software
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: Changzhou Rattm Motor Co.,Ltd
See On Amazon #4
RATTMMOTOR DC Motor CNC 775 Spindle Motor 100W 12-24VDC 20000RMP + ER11 Collet for DIY Mini CNC Router 3018 3018Pro 3018Pro-Max 3018Pro-N 1610 1610Pro Engraving Router Milling Machine
Asin: B08FD2PJHK | Model: CNC-775 | PartNumber: CNC-775 | Ean: 0619191686209 | UPC: 619191686209
Large Torque, Low Friction And Stable Operation..
Package Include: 1 ×775 Spindle Motor Er11+ 2×Wrench + 1×Cables.
Mainly For Diy Mini Cnc Wood Router Machine, Such As Cnc 3018 3018Pro 3018Pro-Max 3018Pro-N 1610 1610Pro 2418.
Double Ball Bearings Have Low Noise..
Features
- Front and rear double ball bearings, universal DC 12V-24V voltage.
- Double ball bearings have low noise.
- Large torque, low friction and stable operation.
- Mainly for DIY MINI CNC wood router machine, such as CNC 3018 3018Pro 3018Pro-Max 3018Pro-N 1610 1610Pro 2418
- Package include: 1 775 Spindle motor ER11+ 2 wrench + 1 cables
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 1.75 x 0.00 x 0.00 inches | Weight: 0.99 Pounds
See On Amazon #5
CNC Milling Machine Rotational Axis CNC Router Rotary Table Rotary a axis 4th Axis 65mm 3 Jaw Chuck Dividing Head w/ Nema17 stepper motor w/ 54mm Tailstock Reducing ratio 4:1 for CNC Engraving Machine
Asin: B07MDJNDNJ | Model: K11-65 | PartNumber: K11-65 | Ean: 0681385631142 | UPC: 681385631142
♞【Stepper Motor】Nema17 2-Phase Stepper Motor 45N.Cm (64Oz-In) 1.7A.
♞【Application】 The Fourth Axis Can Be Used For Three-Dimensional Processing Of Cylinders, Bends And Circles. The Fourth Axis Engraving Machine Can Be Used For Engraving Spirals, Scars, Bamboo Joints, Etc..
♞【Advantages】Rust-Proof Dust Cover, Polishing And Anode Oxidation Cover, Rust Protection Coating. ,Stable 3 Jaw Chuck Structure,Fine Workmanship,Solid And Practical Jaw, Excellent Process To Maximize Service Life..
♞【Feature】K11-65Mm With Three-Jaw Centering Chuck: Middle Height: 54Mm, Total Height: 85Mm, Angle: 0.3°/Step, Diameter Of Gear Output Shaft: 20 Mm, Reduction Ratio: 4:1 (Belt Delay Mode)..
Features
- Rotation 4th Axis Model:K11-65mm; Chuck Type:K01-63mm 3 Jaw Chuck;54 mm tailstock
- Feature K11-65mm with three-jaw centering chuck: middle height: 54mm, total height: 85mm, angle: 0.3 /step, diameter of gear output shaft: 20 mm, reduction ratio: 4:1 (belt delay mode).
- Stepper motor Nema17 2-phase stepper motor 45N.cm (64oz-in) 1.7A
- Advantages Rust-proof dust cover, polishing and anode oxidation cover, rust protection coating. ,stable 3 jaw chuck structure,fine workmanship,solid and practical jaw, excellent process to maximize service life.
- Application The fourth axis can be used for three-dimensional processing of cylinders, bends and circles. The fourth axis engraving machine can be used for engraving spirals, scars, bamboo joints, etc.
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: Changzhou Rattm Motor Co.,Ltd
See On Amazon #6
1Set Bridgeport Milling Machine R8 Spindle Alignment Screw Vertical Mill Part
Asin: B0CR6S8SQJ | Ean: 0764769487594 | UPC: 764769487594
1Set Bridgeport Milling Machine R8 Spindle Alignment Screw Vertical Mill Part.
Features
- Package R6(6mm)+R8(8mm)
- 1Set Bridgeport Milling Machine R8 Spindle Alignment Screw Vertical Mill Part
- See more on Amazon...
Brand: QXNASU | Manufacturer: QXNASU
See On Amazon #7
Genmitsu 3018-PROVer V2 CNC Milling Machine, Desktop CNC for Beginner with Limit Switches & Emergency-Stop, Upgraded Z Axis Aluminum Spoilboard, Working Area 284 x 180 x 40mm (11.2 x 7.1 x 1.6 inches)
Asin: B0CMTJ6CZC | Model: 3018PV2L | PartNumber: 3018PV2L | Ean: 0816550027905 | UPC: 816550027905
Upgraded Features: The 3018-Prover V2 Boasts Several Enhancements Over Its Predecessor, Including Powerful Yet Quiet Toshiba Tb6s109 Drivers With 32-Bit Chips, Additional Function Ports, And A Redesigned Z Axis Carriage For Superior Engraving Accuracy..
Trust In Sainsmart: As A Leading Brand In The Consumer Cnc Sector, We’Re Committed To Delivering Quality And Reliability. If You Get Stuck, Check Out The Sainsmart Resource Center (See User Guide) Or Contact Us With Any Questions That Arise. Our Customer Service Team Is Always Ready To Assist With Any Questions You May Have..
Complete Accessories To Meet Your Requirement: As You Master The Art Of Cnc And Your Needs Evolve, The 3018-Prover V2 Grows With You. Our Comprehensive Range Of Accessories Allows You To Upgrade Your Machine At Any Time, Ensuring It Always Meets Your Requirements..
User-Friendly Setup: Thanks To The Semi-Preinstallation, Setting Up The 3018-Prover V2 Is A Breeze. With The One-Piece Machined And Molded Aluminum Spoilboard., You’Ll Have It Up And Running In Just About 35 Minutes. Plus, It’S Compatible With User-Friendly Cad/Cam Software Like Carveco, Fusion360, And Easel, So You Can Easily Bring Your Creative Ideas To Life..
Features
- Best Entry-Level: The Genmitsu 3018-PROVer V2 is the top choice for beginners looking to dive into the world of CNC machining. It offers incredible value and opens up a world of possibilities, from crafting unique artwork and personalized gifts to kickstarting your own small business.
- User-Friendly Setup: Thanks to the semi-preinstallation, setting up the 3018-PROVer V2 is a breeze. With the one-piece machined and molded aluminum spoilboard., you ll have it up and running in just about 35 minutes. Plus, it s compatible with user-friendly CAD/CAM software like Carveco, Fusion360, and Easel, so you can easily bring your creative ideas to life.
- Upgraded Features: The 3018-PROVer V2 boasts several enhancements over its predecessor, including powerful yet quiet Toshiba TB6S109 drivers with 32-bit chips, additional function ports, and a redesigned Z Axis Carriage for superior engraving accuracy.
- Complete Accessories to Meet Your Requirement: As you master the art of CNC and your needs evolve, the 3018-PROVer V2 grows with you. Our comprehensive range of accessories allows you to upgrade your machine at any time, ensuring it always meets your requirements.
- Trust in SainSmart: As a leading brand in the consumer CNC sector, we re committed to delivering quality and reliability. If you get stuck, check out the SainSmart Resource Center (see User Guide) or contact us with any questions that arise. Our customer service team is always ready to assist with any questions you may have.
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
See On Amazon #8
Milling Machine Part Fine Feed Black Plastic Hand Wheel For Bridgeport Part
Asin: B0CW6GMQGN | Ean: 0764899963661 | UPC: 764899963661
Brand: QXNASU | Manufacturer: QXNASU
See On Amazon #9
RATTMMOTOR CNC Controller Kit, 4 Axis CNC Kit with Nema23 Stepper Motor 57*76mm 270Oz-in 3A 1.8Nm, TB6600 Driver 4A, USB Mach3 CNC Motion Control Card Breakout Board, 24V Power Supply for CNC Machine
Asin: B09MRXXZZR | Model: 4 axis | PartNumber: 4 axis | Ean: 0754193834842 | UPC: 754193834842
【Low Noise/High Torque Hybrid Stepper Motor】23Hs8430 2-Phase Stepper Motor With A Shaft Diameter Of 8Mm, A Current Of 3A And An Angle Of 1.8°, Is Made Of Durable Metal On The Outside, And The Perfect Combination Of Rubber And Rotor Fills Up The Inner Space And Stabilizes The Overall Structure Of The Motor. The Coils Are Made Of Pure Copper Enameled Wire And The Torque Is Up To 270Oz-In (180N.Cm/18Kg-Cm). The Motor Runs Quietly And Doesn't Cause The Generator To Become Too Hot Over A Long Time..
【Stable Output 24V Dc Power Supply】Over-Current, Over-Voltage And Overload Protection, Power Supply Stable Power Supply, Electrical Energy Conversion Rate Of Up To 90%, Higher Efficiency. Together With The Heat Dissipation Fan Design, Shell Hollow Design, Heat Dissipation Ability Faster And Stronger, More Durable Performance..
【Usb Interface, Drive-Free Design 4-Axis Linkage Control Card】Output Pulse Frequency Of 100Khz, Using The Minimum Error Interpolation Algorithm, High Processing Accuracy. Supports Up To 4 Axes Of Linkage Control, Of Which The 4Th Axis Can Be Set As The Slave Axis. The Control Card Can Be Connected To Pc-Compatible Computers Such As Laptops, Desktops, Tablets And Other Computers With A Usb Interface. As Long As Mach3 Is Running, The Control Card Can Be Used Without Installing Any Drivers..
【Multi-Function Control Card】General-Purpose Opto-Couplers Isolation Input : Can Support The Limit Switch, Emergency Stop Switch, Auto Tool Zero, Home Switch Etc, Electronic Handwheel; Have 0-10V Signal Output , You Can Use Mach3 Software To Control The Spindle Motor Speed; 4 General-Purpose Isolated Relay Drive Output Interface, Can Drive Four Relays For Controlling The Spindle Starts, Forward Rotating And Reverse Rotating, Pumps Or Other Device..
【Support Forward And Reverse Control Stepper Motor Driver】42/57 Tb6600 Stepper Motor Driver With Input Voltage Anti-Reverse Connection And Overheat/Overcurrent Short Circuit Protection, Equipped With Red Warning Light. Through The 3-Digit Dip Switch, You Can Choose 7 Subdivisions (1, 2 / A, 2 / B, 4, 8, 16, 32) And 8 Subdivisions (0.5A, 1.0A 1.5A, 2.0A, 2.5A, 3.0A, 3.5A) Current Control..
【Control Card And Tb6600 Driver Wiring (X-Axis As An Example) 】Driver's "Pul+" Connects To Control Card's Xp+ Pin , Driver's "Dir+" Connects To Control Card's Xd+ Pin , Driver's " Pul- " Pin And " Dir- " Connection To Usb Mach3 Control Card's " 5V ""..
Features
- Motor and TB6600 Driver wiring Stepper motor's RED wire connects to driver's A+ port. Stepper motor's GREEN wire connects to driver's A- port. Stepper motor's YELLOW wire connects to driver's B+ port. Stepper motor's BLUE wire connects to driver's B- port.
- Control Card and TB6600 Driver wiring (X-axis as an example) Driver's Pul+ connects to control card's XP+ pin , Driver's DIR+ connects to control card's XD+ pin , Driver's PUL- pin and DIR- connection to USB Mach3 control card's 5V .
- Low Noise/High Torque Hybrid Stepper Motor 23HS8430 2-phase stepper motor with a shaft diameter of 8mm, a current of 3A and an angle of 1.8 , is made of durable metal on the outside, and the perfect combination of rubber and rotor fills up the inner space and stabilizes the overall structure of the motor. The coils are made of pure copper enameled wire and the torque is up to 270oz-in (180N.cm/18kg-cm). The motor runs quietly and doesn't cause the generator to become too hot over a long time.
- Support Forward and Reverse Control Stepper Motor Driver 42/57 TB6600 stepper motor driver with input voltage anti-reverse connection and overheat/overcurrent short circuit protection, equipped with red warning light. through the 3-digit DIP switch, you can choose 7 subdivisions (1, 2 / A, 2 / B, 4, 8, 16, 32) and 8 subdivisions (0.5A, 1.0A 1.5A, 2.0A, 2.5A, 3.0A, 3.5A) current control.
- USB Interface, Drive-free Design 4-Axis Linkage Control Card Output pulse frequency of 100KHz, using the minimum error interpolation algorithm, high processing accuracy. Supports up to 4 axes of linkage control, of which the 4th axis can be set as the slave axis. The control card can be connected to PC-compatible computers such as laptops, desktops, tablets and other computers with a USB interface. As long as Mach3 is running, the control card can be used without installing any drivers.
- Multi-function control card General-purpose opto-couplers isolation input : can support the limit switch, emergency stop switch, auto tool zero, home switch etc, electronic handwheel; Have 0-10V signal output , you can use mach3 software to control the spindle motor speed; 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps or other device.
- Stable output 24V DC power supply Over-current, over-voltage and overload protection, power supply stable power supply, electrical energy conversion rate of up to 90%, higher efficiency. Together with the heat dissipation fan design, shell hollow design, heat dissipation ability faster and stronger, more durable performance.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 1.93 x 8.46 x 4.49 inches
See On Amazon #10
Daedalus NL330 CNC Dust Shoe, 80mm, Red
Asin: B08BJTJJMC | Model: 77 | PartNumber: 77 | Ean: 0717461966638 | UPC: 717461966638
Good At Removing Wood Chips And Dust.
A 4" Dust Collection System Required.
Easy To Assemble And Install, Easy To Change Bits.
Detachable Bristles, Easy To Interchange The Bristles When It Wears Out.
Features
- Dimensions 10-1/2"L, 5-1/8"W, 7-1/2"H, spindle holder 3-5/32"(80mm), vacuum port 3-13/16"
- Detachable bristles, easy to interchange the bristles when it wears out
- Good at removing wood chips and dust
- Easy to assemble and install, Easy to change bits
- a 4 dust collection system required
- See more on Amazon...
Brand: Daedalus | Manufacturer: Daedalus
Dimensions: 7.48 x 10.63 x 5.12 inches
See On Amazon #11
RATTMMOTOR CNC 1610 PRO 3 Axis GRBL Control DIY Mini CNC Router Machine Kit with Offline Controller and 14pcs ER11 Collets CNC Engraving Milling Machine for Cutting Wood Plastic Acrylic PVC PCB
Asin: B09NRC2P2W | Model: 1610PRO-MJ | PartNumber: 1610PRO-MJ
【Applicable Engraving Material】Cnc 1610 Pro Machine Can Not Only Engraving Wood/Plastic/Acrylic/ Pvc/Pcb/Carbon Fiber/Density Board And So On, But Also Soft Metal Like Copper, Aluminum And The Similar Materials. Howerever, Harder Materials Cannot Be Engraved Such As Glass, Hard Metal, Jade, Ect..
【Cnc Offline Controller】This Machine Can Be Controlled Simply By The Offline Controller Without Connecting It To A Computer. Support Sd Card And Tf Card At The Same Time, Standard Capacity 1G. After Inserting The File Into The Sd Card,The Engraving File Can Be Directly Identified..
【Grbl Control Board/Software】This Machine Can Be Controlled By Grblcontrol/Candle Software After Connecting The Control Board To A Coumpter Via Usb Port. The Control Board Is Equipped With A Fan To Force Heat Dissipation, Also Has More Fuctions Such As Support Spindle Pwm Speed, Limit Switch, Tool Setting, Steering Gear..
【Simple Assembly/Use】This Mini Cnc Router Machine Kit Is Mainly Designed For Diy Carving Enthusiasts/Beginners, Easily Assembled And Opertated, Coming With A Paper Manual And Usb Flash Drive Of All The Files..
Features
- Upgrade Version CNC 1610 PRO Frame size: 30x26x25CM. Working area:18x10x4.5CM. Material: Aluminum Alloy. Spindle: 775 spindle motor (12-24V) 24V:10000r/min with14pcs ER11 collets . Stepper motor: 42 stepper motor, 12V, phase current 1.3A, phase resistance 2.1 ohms, torque 0.25N.m
- Simple Assembly/Use This mini cnc router machine kit is mainly designed for DIY carving enthusiasts/beginners, easily assembled and opertated, coming with a paper manual and USB flash drive of all the files.
- Applicable Engraving Material CNC 1610 PRO machine can not only engraving wood/plastic/acrylic/ pvc/pcb/carbon fiber/density board and so on, but also soft metal like copper, aluminum and the similar materials. Howerever, harder materials cannot be engraved such as glass, hard metal, jade, ect.
- GRBL Control Board/Software This machine can be controlled by Grblcontrol/Candle software after connecting the control board to a coumpter via USB port. The control board is equipped with a fan to force heat dissipation, also has more fuctions such as support spindle PWM speed, limit switch, tool setting, steering gear.
- CNC Offline Controller This machine can be controlled simply by the offline controller without connecting it to a computer. Support SD card and TF card at the same time, standard capacity 1G. After inserting the file into the SD card,the engraving file can be directly identified.
- See more on Amazon...
Brand: RATTMMOTOR | Manufacturer: RTM
Dimensions: 11.81 x 10.24 x 0.01 inches
See On Amazon #12
Milling Machine Part Feed Reverse Knob Assembly for Bridgeport CNC Mill Tool
Asin: B0CPYPJWLQ | Ean: 0764015454042 | UPC: 764015454042
Suitable For Most Milling Machines.
Features
- Milling Machine Part Feed Reverse Knob Assembly For Bridgeport CNC Mill Tool
- Suitable for most milling machines
- See more on Amazon...
Brand: CAUME | Manufacturer: QXNASU
See On Amazon #13
Genmitsu CNC Brushless Motor DC Spindle Kit 24V 12000rpm with Drive Board & Collet Holder Installed, Perfect for 3018 Series CNC Machine
Asin: B09MZ1WPP3 | Model: 245805502 | PartNumber: 245805502 | Ean: 0816550025482 | UPC: 816550025482
Compared To Other Normal Spindle Motors, The Brushless Motor Has A Much Longer Service Time. It Is Almost Maintenance-Free. You Just Need To Do Some Dusting When Necessary.
Experience A Quick And Easy Upgrade For Your 3018 Cnc Router. The Spindle Comes With A Drive Board, Usb Cable And The Collet Holder Is Pre-Installed Already..
The Diameter Of The Spindle Is 44Mm. Perfect For Most 3018 Cnc Routers On The Market, Includes Genmitsu 3018-Pro, 3018-Prover And 1810-Pro. (Note: It Can Not Work With The Control Board Of 3018-Prover Mach3 And 3018-Mx3).
Up To 26Db Quieter During Operation. High Stability Running Performance Makes It Perfect For High Precision Engraving..
Features
- DC: 24V, No Load Speed: 12000 rpm, Rated Load Speed: 10000 rpm.
- Up to 26dB quieter during operation. High stability running performance makes it perfect for high precision engraving.
- Compared to other normal spindle motors, the Brushless Motor has a much longer service time. It is almost maintenance-free. You just need to do some dusting when necessary
- The diameter of the spindle is 44mm. Perfect for most 3018 CNC Routers on the market, includes Genmitsu 3018-PRO, 3018-PROVer and 1810-PRO. (Note: It can not work with the control board of 3018-PROVer Mach3 and 3018-MX3)
- Experience a quick and easy upgrade for your 3018 CNC Router. The spindle comes with a drive board, USB cable and the Collet Holder is pre-installed already.
- See more on Amazon...
Brand: Genmitsu | Manufacturer: Genmitsu
See On Amazon #14
FoxAlien Masuter 4040 CNC Router Machine, 3-Axis Engraving Milling Machine 15.75x14.96 Working Area for Carving Cutting Wood Acrylic MDF Nylon
Asin: B093LH9899 | Model: Masuter 4040 | PartNumber: Masuter 4040 | Ean: 0778107043311 | UPC: 778107043311
Masuter 4040 Is Capable To Engrave, Cut And Drill Many Kinds Of Material Such As Wood, Mdf, Acrylic And Resin Etc. Recommended Settings: Speed-1000Mm/Min; Depth Per Pass-0.2Mm; Plunge Rate-200Mm/Min..
Main Parts Are Pre-Assembled. It Takes About 20-30Mins To Fully Assembly. The Machine Is Compatible With Grbl Software. It Supports Windows Xp/7/10, Linux And Mac Os..
Home Function And Emergency-Stop Button Are Integrated On The Machine. The Machine Will Go To Home With Simply Press The Button..
The Control Board Is Equipped With An Upgraded 32-Bit Chip Which Works More Efficient And Stable. It Also Supports Add-Ons Such As Offline Controller, 300W Spindle And Power Modules. (Add-Ons Sold Separately).
Features
- Masuter 4040 is a budget-friendly CNC router with large working area of 400 x 380 x 55mm (15.75 x 14.96 x 2.16 ). It uses a 60W spindle and NEMA17 stepper motors. Max moving speed is 2000mm/min and spindle speed range is 0~10000.
- The control board is equipped with an upgraded 32-bit chip which works more efficient and stable. It also supports add-ons such as offline controller, 300W spindle and power modules. (Add-ons sold separately)
- Masuter 4040 is capable to engrave, cut and drill many kinds of material such as wood, MDF, acrylic and resin etc. Recommended settings: speed-1000mm/min; depth per pass-0.2mm; plunge rate-200mm/min.
- HOME function and Emergency-Stop button are integrated on the machine. The machine will go to home with simply press the button.
- Main parts are pre-assembled. It takes about 20-30mins to fully assembly. The machine is compatible with Grbl software. It supports Windows XP/7/10, Linux and Mac OS.
- See more on Amazon...
Brand: FoxAlien | Manufacturer: FoxAlien
Dimensions: 11.81 x 26.38 x 23.62 inches
See On Amazon #15
CNC Z-Axis Router Mill Touch Plate Tool Setting Probe Milling Tool Pro
Asin: B07GT3CHWZ | Model: CNC Z Axis Router | PartNumber: CNC Z Axis Router | Ean: 0735314502130 | UPC: 735314502130
Cnc Router Mill: Z-Axis Tool Setting Touch Plate Works.
Size: Approx. 3.5 X 2Cm/ 1.38 X 0.79Inch (D X H).
Effective Surface Of The Blade: Approx. 25Mm /0.98Inch (Diameter).
Cnc Router Engraving Machine Tool Setting Auto-Check Instrument 1.38Inch.
Features
- CNC Z-Axis router mill touch plate tool setting probe new milling hot kit.
- CNC router engraving machine tool setting auto-Check instrument 1.38inch
- CNC router mill: Z-Axis tool setting touch plate works
- Effective surface of the blade: approx. 25mm /0.98inch (diameter)
- Size: approx. 3.5 x 2cm/ 1.38 x 0.79inch (D x H)
- See more on Amazon...
Brand: BACHIN | Manufacturer: BACHIN
Dimensions: 1.50 x 3.50 x 2.50 inches
See On Amazon #16
Milling Machine Parts Power Feed Plastic Gear Import For ALIGN Replace Parts
Asin: B0CQ7N4WTX | Ean: 0764769486733 | UPC: 764769486733
Thickness: 16Mm.
Fits Models: Al-300.
Inner Diameter (Taper): 42Mm -50Mm.
Features
- Outside diameter: 92mm
- Inner diameter (taper): 42mm -50mm
- Thickness: 16mm
- Fits models: AL-300
- See more on Amazon...
Brand: QXNASU | Manufacturer: QXNASU
See On Amazon #17
MYSWEETY CNC 500W Spindle Motor kit, 11000RPM Milling Motor,52mm Clamp, Spindle Speed Power Converter with Emergency Stop,Reset, Push Button and Continue Functions, Ideal for CNC Router Machine
Asin: B0CM6KS4MC | Model: 500W | PartNumber: 500W
【500W Cnc Spindle Motor】Power: 500W, Input: Ac110v, Idling Speed: 11000 Rev / Min. Insulation Resistance:> 2 Megohms, Dielectric Strength: 400V. Motor Length: 200Mm, High Precision Spindle Run Out 0.01-0.03.Easier Handling Of Hard Materials For Better Engraving Techniques..
【Supported Model】Support 42 Stepper Motor And 48V Spindle Cnc Engraving Machine, Support 12V Laser Module (Not Included), Unlock More Possibilities..
【 52Mm Mount Bracket】The Spindle Motor Bracket Clamp Made Of High Quality Cast Aluminum, Robust And Sturdy. Diameter: 52Mm, Chuck Portion Length: 45Mm, Chuck Portion Diameter: 16Mm..
【Integrated Control Box Upgrade】 The Power Supply And Control Board Are Integrated In A Control Box. Input Voltage: Ac110v/220V, Output Voltage: 48V. In Addition To The Original Speed Control Buttons, There Are New Emergency Stop Switch, Reset Switch, Pause Switch And Continue Switch.Function And Safety Upgrade..
Features
- CNC Spindle Kit 1 x 500W air-cooled spindle motor, 1 x integrated control box, 1 x spindle connector, 1 x 52mm mounting bracket, 1 x spindle motor cable, 1 x power cable, 1 x user manual, 2 x open spanner (13mm/17mm), 4 x stepper motor cables.
- Integrated Control Box Upgrade The power supply and control board are integrated in a control box. Input voltage: AC110V/220V, Output voltage: 48V. In addition to the original speed control buttons, there are new emergency stop switch, reset switch, pause switch and continue switch.Function and safety upgrade.
- 500W CNC Spindle Motor Power: 500W, Input: AC110V, Idling speed: 11000 rev / min. Insulation resistance:> 2 megohms, Dielectric strength: 400V. Motor length: 200MM, High precision spindle run out 0.01-0.03.Easier handling of hard materials for better engraving techniques.
- 52mm Mount Bracket The spindle motor bracket clamp made of high quality cast aluminum, robust and sturdy. Diameter: 52mm, Chuck portion length: 45MM, Chuck portion diameter: 16mm.
- Supported Model Support 42 stepper motor and 48V spindle cnc engraving machine, support 12V laser module (not included), unlock more possibilities.
- See more on Amazon...
Brand: MYSWEETY | Manufacturer: MYSWEETY
See On Amazon #18
CNCTOPBAOS 4 Axis Nema23 Stepper Motor Kit,425oz-in 112mm 3A Dual Shaft,Motor Driver CNC Controller Kit,Mach3 Control Board,36V Power Supply for CNC Router Milling Engraving Machine
Asin: B07LF8KRBR | Ean: 0681385631104 | UPC: 681385631104
♞【Control Board】1Pcs 5 Axis Breakout Boad With Cables,This Breakout Board Needs To Be Connected To The Parallel Port And Usb Port Of The Computer At The Same Time.Working Voltage Is 5V Dc And Support With Mach3,Emc2,Kcam4 Software.
♞【Application】This Cnc Kit Are Widely Used In Engraving Machine, Printer, Medical Equipment, Embroidery Machine, Stage Lighting, Textile Automation, Printing, Packaging And Other Industries Automation Equipment..
♞【Power Supply】1Pcs 400W,36V/9.7A Switching Power Supply; Output Voltage:36V ; Input: 110-120V Ac Or 220-240V Ac.
♞【Stepper Motor Driver】4Pcs Cw5045 Driver, Current: 1.3A-4.5A ; Driver Microstep: 1 (1.8°), 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256, 1/5, 1/10, 1/25, 1/50, 1/125, 1/250 ; Input Voltage: 24-50V Dc.
Features
- Stepper Motor 4pcs 23HS2430B nema23 stepper motor ; Holding Torque: 425oz-in/ 280Ncm ; Step Angle(degrees):1.8 ; Phase:2 ; Shaft: 8mm Dual Shaft ; Type:Hybrid ; Lead: 4-lead ; Size:57x57x112mm.
- Stepper Motor Driver 4pcs CW5045 driver, current: 1.3A-4.5A ; Driver microstep: 1 (1.8 ), 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256, 1/5, 1/10, 1/25, 1/50, 1/125, 1/250 ; Input voltage: 24-50V DC
- Control Board 1pcs 5 Axis breakout boad with cables,this breakout board needs to be connected to the parallel port and USB port of the computer at the same time.Working voltage is 5V DC and support with MACH3,EMC2,KCAM4 software
- Power supply 1pcs 400W,36V/9.7A switching power supply; Output Voltage:36V ; Input: 110-120V AC or 220-240V AC
- Application This cnc kit are widely used in engraving machine, printer, medical equipment, embroidery machine, stage lighting, textile automation, printing, packaging and other industries automation equipment.
- See more on Amazon...
Brand: CNCTOPBAOS | Manufacturer: Changzhou Rattm Motor Co.,Ltd
See On Amazon #19
20000RPM 775 CNC Spindle Motor with 5mm ER11 Extension Shaft, Longer Working Life, DC 12-24V, High Power, Low Noise, Electrical DC Motor for 3018/3018 PRO CNC Router Machine
Asin: B0C1YX335R
【Compatibility】-It's Compatible With All 3018 Series Cnc Router..
【Warranty Assurance】-We Have 20 Years Manufacturing Experience , Pls Contact Us For Any Question Or Problem. We Are Proficient In Customizing Products According To Various Requests And Applications. If You Have Special Inquiry, Pls Let Us Know..
【Advantage】-Double Ball Bearing Brush,Powerful Motor That Is Able To Drill Hard Material. The Working Life Of Our 775 Motor Is 2 Times Longer Than Ordinary 775 Motor..
Features
- Specification -DC: 12-24V. Speed: 20000/min. Speed is adjustable through software.
- Advantage -Double ball bearing brush,powerful motor that is able to drill hard material. The working life of our 775 motor is 2 times longer than ordinary 775 motor.
- Compatibility -It's compatible with All 3018 Series CNC router.
- WARRANTY ASSURANCE -We have 20 years manufacturing experience , pls contact us for any question or problem. We are proficient in customizing products according to various requests and applications. If you have special inquiry, pls let us know.
- See more on Amazon...
Brand: Zhong Hua Jiang | Manufacturer: huajiang
See On Amazon
Looking For Something Else?
Search