AITRIP 5PCS Heart Rate Sensor Module MAX30102 Puls Detection Blood Oxygen Concentration for Arduino STM32
Asin: B09784YPLB | Ean: 0701715466890 | UPC: 701715466890
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Max30102 Is An Integrated Module Of Heart Rate Monitor Biosensor. It Integrates A Red Led With An Infrared Led, A Photoelectric Detector, An Optical Device, And A Low Noise Electronic Circuit With Ambient Light Suppression;Max30102 Uses A 1.8V Power Supply And An Independent 5.0V Power Supply For Internal Led.
The Chip Can Also Turn Off The Module By Software, And The Standby Current Is Close To Zero, So That The Power Supply Can Always Be Maintained..
It Can Be Used To A Wearable Device For Heart Rate And Blood Oxygen Collection, Worn On Fingers, Ear Lobes, Wrists And Other Places..
The Standard I2c Compatible Communication Interface Can Transmit The Collected Data Compatible With Arduino, Kl25z And Other Microcontrollers For Heart Rate And Blood Oxygen Calculation..
Features
- 3pcs Heart-Rate Sensor Module , MAX30102 Blood Oxygen Sensor, Compatible with Arduino STM32
- The standard I2C compatible communication interface can transmit the collected data Compatible with Arduino, KL25Z and other microcontrollers for heart rate and blood oxygen calculation.
- MAX30102 is an integrated module of heart rate monitor biosensor. It integrates a red LED with an infrared LED, a photoelectric detector, an optical device, and a low noise electronic circuit with ambient light suppression;MAX30102 uses a 1.8V power supply and an independent 5.0V power supply for internal LED
- it can be used to a wearable device for heart rate and blood oxygen collection, worn on fingers, ear lobes, wrists and other places.
- The chip can also turn off the module by software, and the standby current is close to zero, so that the power supply can always be maintained.
- See more on Amazon...
Brand: AITRIP | Manufacturer: AITRIP
See On Amazon Similar To AITRIP 5PCS Heart Rate Sensor
#1
AITRIP 3PCS Air Pressure Sensor Module Board 3.3-5V Digital Barometric Pressure Sensor Module Liquid Water Level Controller Board 0-40KPa for Arduino
Asin: B09KXXBCYX | Ean: 0701715499867 | UPC: 701715499867
Adopt 5K Ohm Resistor Bridge Sensor, And Specific Air Pressure Value Needs Calculating..
You Will Get 3 Pcs 3.3-5V Digital Barometric Pressure Sensor Module Liquid Water Level Controller Board 0-40Kpa Connect 2.5Mm Soft Tube For Arduino.
This Module Adopts High Precision Ad Sampling Chip And 0-40Kpa Air Pressure Sensor. And It Can Connect 2.5Mm Soft Tube And Detect The Water Level And Other Air Pressure.
Voltage: 3.3-5V.
Features
- Pressure: 0-40KPa., Voltage: 3.3-5V. The specific air pressure value needs to be calculated
- Voltage: 3.3-5V
- Adopt 5K ohm resistor bridge sensor, and specific air pressure value needs calculating.
- This module adopts high precision AD sampling chip and 0-40KPa air pressure sensor. And it can connect 2.5mm soft tube and detect the water level and other air pressure
- you will get 3 pcs 3.3-5V Digital Barometric Pressure Sensor Module Liquid Water Level Controller Board 0-40KPa Connect 2.5mm Soft Tube For Arduino
- See more on Amazon...
Brand: AITRIP | Manufacturer: AITRIP
Weight: 0.10 pounds
See On Amazon #2
Comimark 2Pcs Heart Rate Pulse Sensor Sensor Module for Arduino Raspberry pi
Asin: B07V6VV8CM | Model: LY354 | PartNumber: LY354 | Ean: 0657835672423 | UPC: 657835672423
The Power Supply Voltage: 3.3V ~ 5 V.
If You Are Not Satisfied With Your Purchase For Any Reason, Please Feel Free To Contact Us At The Buyer Center Or Support Email, 24/7 Quick Reply.
Package Included: 2 X Heart Rate Pulse Sensor Sensor Module For Arduino Raspberry Pi.
Sensors Can Be Put On The Finger Or Earlobe, Through Interconnected Line Can Be Connected To The Arduino.It Also Has An Open Source App, Can Real Time Your Heart Rate Graph Display..
Features
- Pulse sensor Arduino is used to test the heart rate sensor, students, artists,athletes, creator, game developer, or mobile terminal can develop interactive work related to heart rate.
- Sensors can be put on the finger or earlobe, through interconnected line can be connected to the Arduino.It also has an open source app, can real time your heart rate graph display.
- The power supply voltage: 3.3V ~ 5 v
- Package Included: 2 x Heart Rate Pulse Sensor Sensor Module For Arduino Raspberry pi
- If You Are Not Satisfied with Your Purchase for Any Reason, Please Feel Free To Contact Us at the Buyer Center or Support Email, 24/7 Quick Reply
- See more on Amazon...
Brand: Comimark | Manufacturer: Comimark 2Pcs Heart Rate Pulse Sensor Sensor Module for Arduino Raspberry pi
See On Amazon #3
FainWan 3PCS Pulse Sensor Heart Rate Sensor Monitor Pulse Sensor Compatible with Ar-duino Module Raspberry pi
Asin: B09PR3QQVD | Model: Pulse Sensor-3P | PartNumber: Pulse Sensor-3P | Ean: 0768571606518 | UPC: 768571606518
Diameter: 16Mm,Magnification: 330,Led Wavelength: 609Nm.
The Sensor Clips Onto A Fingertip Or Earlobe And Plugs Right Into Ar-Duino With Some Jumper Cables..
Pulse Sensor Ar-Duino Is Used To Test The Heart Rate Sensor, Students, Artists,Athletes, Creator, Game Developer, Or Mobile Terminal Can Develop Interactive Work Related To Heart Rate..
The Power Supply Voltage: 3.3V ~ 5 V.
Features
- Package Included: 3 x Heart Rate Pulse Sensor Sensor Module Compatible with Ar-duino Raspberry pi
- The power supply voltage: 3.3V ~ 5 v
- Diameter: 16mm,Magnification: 330,LED Wavelength: 609nm
- Pulse sensor Ar-duino is used to test the heart rate sensor, students, artists,athletes, creator, game developer, or mobile terminal can develop interactive work related to heart rate.
- The sensor clips onto a fingertip or earlobe and plugs right into Ar-duino with some jumper cables.
- See more on Amazon...
Brand: FainWan | Manufacturer: FainWan
See On Amazon #4
DEVMO 2PCS Pulse Sensor Heart Rate Sensor Monitor PulseSensor Compatible with Ar-duino Module Raspberry pi
Asin: B07Y882ZR6 | Model: five-1113 | PartNumber: five-1113 | Ean: 0782429226086 | UPC: 782429226086
★It Also Includes An Open-Source Monitoring App That Graphs Your Pulse In Real Time..
★Package Includes: 2X Pulse Sensor Heart Rate Sensor Monitor Pulsesensor For Ar-Duino Module Raspberry Pi Technical Support Is Not Included In This Auction.
★Power: 3-5V,Diameter: 16Mm,Magnification: 330,Led Wavelength: 609Nm.
★The Sensor Clips Onto A Fingertip Or Earlobe And Plugs Right Into Ar-Duino With Some Jumper Cables..
Features
- Pulse Sensor is a well-designed plug-and-play heart-rate sensor for Ar-duino.
- The sensor clips onto a fingertip or earlobe and plugs right into Ar-duino with some jumper cables.
- It also includes an open-source monitoring app that graphs your pulse in real time.
- Power: 3-5V,Diameter: 16mm,Magnification: 330,LED Wavelength: 609nm
- Package Includes: 2x Pulse Sensor Heart Rate Sensor Monitor PulseSensor for Ar-duino Module Raspberry Pi Technical support is NOT included in this auction
- See more on Amazon...
Brand: DEVMO | Manufacturer: DEVMO
See On Amazon #5
HiLetgo 5pcs 5V Heartbeat Detect Sensor Heart Rate Detect Measuring Module Measure Finger
Asin: B01HTC52P4 | Model: 3-01-1130 | PartNumber: 3-01-1130
Int Sensor Pin=0.
Int Period=20.
Double Alpha=0.75.
Int Led Pin=13.
Features
- 5V Heartbeat Detect Sensor
- INT led Pin=13
- INT sensor Pin=0
- Double alpha=0.75
- INT period=20
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #6
! Pulse Sensor Kit Pulsesensor Heart Rate Module with Fitting
Asin: B07W4N8J3Z | Ean: 0717066880759 | UPC: 717066880759
Brand: Reland Sun | Manufacturer: Reland Sun
See On Amazon #7
10pcs pulsesensor Pulse Heart Rate Sensor
Asin: B07VKDPZQF | Ean: 4814005088590
Brand: Deeoee | Manufacturer: Deeoee
See On Amazon
Looking For Something Else?
Search