MECCANIXITY Battery Wrap PVC Heat Shrink Tubing 127mm Dia 200mm Flat 10 Feet Clear Good Insulation for Battery Pack
Asin: B097ZRP2TS | Model: mea210427ee0121 | PartNumber: mea210427ee0121
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Battery Wrap Tube Is With Good Insulation, Can Not Only Wrap And Protect The Battery Pack, Prevent Dust For The Battery Pack, But Also Beautify The Battery Pack. With Good Insulation, Pvc Heat Shrink Tubing Can Also Be Used For The Protection Of Electronic Components, And Led Pins..
Notice: Heat Gun Is Usually Used As Heating Tool. When Using The Heat Gun To Heat, Pay Attention To Move Back And Forth To Make The Heat Shrink Tube Heated As A Whole..
Steps Of Installation:1.Prepare Heat Shrink Tube, Cut It To The Length You Want ; 2.Put Battery In The Heat Shrink Tube ; 3.Shrink With Heat Gun.
The Pvc Heat Shrink Wrap Tube Is In Size Of: 127Mm Dia, 200Mm(8-Inch) Flat Width, 10 Feet Total Length, -40°C To +105°C(-40°F To +221°F) Temperature Range, 80°C(176°F) Shrinking Temperature.
Features
- PVC heat shrink wrap tube can be used for big battery or battery pack protection, such as 18650, 21700, AA, AAA battery packs. Battery wraps can be used for protection for batteries pack, electronic components, LED pins, etc. PVC heat shrinkable tube can also be used for DIY of various handle tools in daily life, more convenient and fast.
- The PVC heat shrink wrap tube is in size of: 127mm dia, 200mm(8-inch) flat width, 10 Feet total length, -40 C to +105 C(-40 F to +221 F) temperature range, 80 C(176 F) shrinking temperature
- Battery wrap tube is with good insulation, can not only wrap and protect the battery pack, prevent dust for the battery pack, but also beautify the battery pack. With good insulation, PVC heat shrink tubing can also be used for the protection of electronic components, and LED pins.
- Steps of installation:1.Prepare heat shrink tube, cut it to the length you want ; 2.Put battery in the heat shrink tube ; 3.Shrink with heat gun
- Notice: heat gun is usually used as heating tool. When using the heat gun to heat, pay attention to move back and forth to make the heat shrink tube heated as a whole.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon Similar To MECCANIXITY Battery Wrap PVC Heat
#1
200mm(7.9in) Width PVC Heat Shrink Wrap Tube 18650 21700 26650 Lithium Battery DIY Battery Pack 3M(9.9ft) Length Blue
Asin: B09SVFL33L | Model: 200mmX3m | PartNumber: 200mmX3m | Ean: 0792933396274 | UPC: 792933396274
Shrinkage Temperature: 90-110(℃); Shrinkage Rate: 48% (Cross-Section), 5% (Longitudinal);.
Application: Used For 18650 21700 26650 Lithium Battery Diy Battery Pack And Enhance Electrical Insulation..
Advantages: Insulation Protection, Fast Shrinkage, Multiple Applications;.
Size: 200Mm(7.9In) Wide, 3M(9.9Ft) Length, Thickness Is 0.15Mm;.
Features
- Material: PVC Heat Shrinkable;
- Size: 200mm(7.9in) Wide, 3M(9.9ft) Length, Thickness is 0.15mm;
- Shrinkage Temperature: 90-110( ); Shrinkage Rate: 48% (cross-section), 5% (longitudinal);
- Advantages: Insulation Protection, Fast Shrinkage, Multiple Applications;
- Application: used for 18650 21700 26650 Lithium Battery DIY Battery Pack and enhance electrical insulation.
- See more on Amazon...
Brand: JichuET | Manufacturer: JichuET
See On Amazon #2
OCR 300PCS Flat PVC Heat Shrink Tubing Battery Wrap for 1x 18650 Battery(29.5mm *12 Colors)
Asin: B072LQQMDQ | Model: US_BAT037 | PartNumber: US_BAT037 | Ean: 0764276388698 | UPC: 764276388698
Flat Width: 29.5Mm;Shrinkable Temperature:80℃,Shrinking Rate:≥48±5%;.
Note:Please Place This Product In A Cool Place To Avoid Deformation Due To High Temperature.
Package Includes 12 Different Colors 300Pcs Pvc Heat Shrink Tube,Each Color 25Pcs..
Excellent Environmental Protection, Insulation, Stable Performance And Fast Shrinkage..
Features
- High quality PVC heat shrink tube for 18650 batteries.
- Excellent environmental protection, insulation, stable performance and fast shrinkage.
- Flat Width: 29.5mm;Shrinkable Temperature:80 ,Shrinking Rate: 48 5%;
- Package includes 12 different colors 300pcs PVC heat shrink tube,each color 25pcs.
- Note:Please place this product in a cool place to avoid deformation due to high temperature
- See more on Amazon...
Brand: OCR | Manufacturer: OCR
Dimensions: 0.04 x 1.16 x 1.16 inches
See On Amazon #3
Battery Wrap PVC Heat Shrink Wrap Tube for 18650 21700 26650 Lithium Battery DIY Battery Packs Flat Width 7.9in(200mm) Length 9.9ft (3m) Blue
Asin: B0CWDVQ528 | Ean: 0735530460177 | UPC: 735530460177
Excellent Insulation Performance: Pvc Heat Shrink Tubing Has Good Electrical Insulation Performance, Which Can Effectively Isolate The Electrical Connection Between The Battery And The External Environment, Avoiding Safety Risks Caused By Electrical Problems Such As Short Circuits In The Battery. Can Not Only Wrap And Protect The Battery Pack, Prevent Dust For The Battery Pack, But Also Beautify The Battery Pack. Also Be Used For The Protection Of Electronic Components, And Led Pins..
Easy To Install:: The Installation Process Of Pvc Heat Shrink Tubing Is Simple, And It Can Be Shrunk And Wrapped Around The Battery By Heating, Without The Need For Complex Operations, Greatly Improving Work Efficiency.1.Prepare Heat Shrink Tube, Cut It To The Length You Want ; 2.Put Battery In The Heat Shrink Tube ; 3.Shrink With Heat Gun..
Excellent Weather Resistance, Wear Resistance And Corrosion Resistance：Pvc Heat Shrink Tubing Has Extremely Strong Weather Resistance And Can Maintain Stable Performance In Various Harsh Environments Such As High Temperature, Low Temperature, And Humidity, Ensuring That The Battery Can Work Safely And Stably Under Various Environmental Conditions.Pvc Heat Shrink Tubing Can Resist The Friction And Collision That May Occur During Battery Use, Reducing The Risk Of Battery Damage. At The Same Time, It Also Has Excellent Chemical Corrosion Resistance, Which Can Effectively Resist The Erosion Of Various Chemical Substances And Protect The Safety Of The Battery..
The Pvc Heat Shrink Wrap Tube Is In Size Of: 150Mm(6-Inch) Flat Width, 10 Feet Total Length, -40°C To +105°C(-40°F To +221°F) Temperature Range, 80°C(176°F) Shrinking Temperature. Shrinkage Rate: 48% (Cross-Section), 5% (Longitudinal);.
Features
- Widely applicable: PVC heat shrink wrap tube can be used for big battery or battery pack protection, such as 18650, 21700, 26650, AA, AAA battery packs. Battery wraps can be used for protection for batteries pack, electronic components, LED pins, etc. PVC heat shrinkable tube can also be used for DIY of various handle tools in daily life, more convenient and fast.
- The PVC heat shrink wrap tube is in size of: 150mm(6-inch) flat width, 10 Feet total length, -40 C to +105 C(-40 F to +221 F) temperature range, 80 C(176 F) shrinking temperature. Shrinkage Rate: 48% (cross-section), 5% (longitudinal);
- Excellent insulation performance: PVC heat shrink tubing has good electrical insulation performance, which can effectively isolate the electrical connection between the battery and the external environment, avoiding safety risks caused by electrical problems such as short circuits in the battery. can not only wrap and protect the battery pack, prevent dust for the battery pack, but also beautify the battery pack. also be used for the protection of electronic components, and LED pins.
- Excellent weather resistance, wear resistance and corrosion resistance PVC heat shrink tubing has extremely strong weather resistance and can maintain stable performance in various harsh environments such as high temperature, low temperature, and humidity, ensuring that the battery can work safely and stably under various environmental conditions.PVC heat shrink tubing can resist the friction and collision that may occur during battery use, reducing the risk of battery damage. At the same time, it also has excellent chemical corrosion resistance, which can effectively resist the erosion of various chemical substances and protect the safety of the battery.
- Easy To Install:: The installation process of PVC heat shrink tubing is simple, and it can be shrunk and wrapped around the battery by heating, without the need for complex operations, greatly improving work efficiency.1.Prepare heat shrink tube, cut it to the length you want ; 2.Put battery in the heat shrink tube ; 3.Shrink with heat gun.
- See more on Amazon...
Brand: HTBMALL | Manufacturer: HTBMALL
Weight: 0.53 pounds
See On Amazon #4
MatchWhiz Flat Width 9.85in (250mm) PVC Heat Shrink Wrap Tube for 18650 21700 Lithium Battery DIY Battery Packs Blue Length 9.9ft (3m)
Asin: B0C3Y39C8H | Model: PVC-P000 | PartNumber: PVC-P000
Saving You Money In The Long Run：Pvc Heat Shrink Wrap Tube Has Excellent Flame Retardant, Insulation, Flexibility, Stable Performance, Low Shrinkage Temperature, And Fast Shrinkage. The Product Has Good High-Temperature Resistance And Secondary Shrinkage..
Reduce Your Carbon Footprint: Pvc Heat Shrink Wrap Tube Can Insulate, Moisture-Proof, Anti-Corrosion, And Dust-Proof The Wrapped Objects..
Easy To Use, Easy To Install: Pvc Heat Shrink Tube For Diy Projects And Repairs; A Hairdryer Can Be Used To Complete The Shrinkage. For Heat Shrink Tubing With Relatively Large Or Long Diameters, Tools Such As A Heat Gun Or A Shrink Machine Can Be Used To Heat It To Shrink Completely..
Professional Grade Shrink Wrap: Shrinkage Temperature: 80℃; Temperature Range: -40℃～105℃; Temperature Rating: 105℃; Shrinkage Ratio: ≥48±5%; Rated Voltage: 300V; Product Color: Blue;.
Features
- PRODUCT SPECIFICATIONS: 250mm 2mm(9.85in) Flattening Width (Fold Diameter) , 3 Meter(9.9ft) Length, Thickness 0.15mm;
- PROFESSIONAL GRADE SHRINK WRAP: Shrinkage Temperature: 80 ; Temperature Range: -40 105 ; Temperature Rating: 105 ; Shrinkage Ratio: 48 5%; Rated Voltage: 300V; Product Color: Blue;
- SAVING YOU MONEY IN THE LONG RUN PVC heat shrink wrap tube has excellent flame retardant, insulation, flexibility, stable performance, low shrinkage temperature, and fast shrinkage. The product has good high-temperature resistance and secondary shrinkage.
- EASY TO USE, EASY TO INSTALL: PVC Heat Shrink Tube for DIY Projects and Repairs; A hairdryer can be used to complete the shrinkage. For heat shrink tubing with relatively large or long diameters, tools such as a heat gun or a shrink machine can be used to heat it to shrink completely.
- REDUCE YOUR CARBON FOOTPRINT: PVC Heat Shrink Wrap Tube can insulate, moisture-proof, anti-corrosion, and dust-proof the wrapped objects.
- See more on Amazon...
Brand: MatchWhiz | Manufacturer: MatchWhiz
See On Amazon #5
PVC Heat Shrink Wrap Tube, Battery Wrap for 18650 21700 26650 Lithium Battery DIY Battery Packs Flat Width 3.9in(100mm) Length 9.9ft (3m) Blue
Asin: B0CX9DTHYB | Ean: 0735530523032 | UPC: 735530523032
Excellent Characteristics: Pvc Heat Shrink Tube Has The Features Of Durability, Corrosion Resistance And Wear Resistance, Which Can Improve The Stability Of The Battery And Prevent Mechanical Wear And Damage During Long-Term Use Of The Battery..
Easy Operation & Cost Savings: The Installation Of Pvc Heat Shrink Tubing Is Simple, Easy To Install And Use. At The Same Time, Its High Transparency, Easy Shrinkage, High Strength Characteristics Make It Strong Operability, Can Freely Adjust The Shrinkage Rate According To User Needs, Saving Raw Materials..
Environmental-Friendly: Compared With Traditional Battery Production Methods, Pvc Heat Shrink Tube Can Be Recycled, Eco-Friendly, Reducing The Amount Of Waste That Ends Up In Landfills, Which Is Conducive To Environmental Protection..
Excellent Performance: 100Mm(3.9-Inch) Flat Width, 10 Feet Total Length, -40°C To +105°C(-40°F To +221°F) Temperature Range, 80°C(176°F) Shrinking Temperature. Shrinkage Rate: 48% (Cross-Section), 5% (Longitudinal);.
Features
- Safety Protection: PVC heat shrink tube can effectively insulate and isolate the battery to avoid damage caused by short circuit and other safety problems during the use of the battery, thereby improving the safety of battery use. fit for such as 18650, 21700, 26650, AA, AAA battery packs. Battery wraps can be used for protection for batteries pack, electronic components, LED pins, etc. PVC heat shrinkable tube can also be used for DIY of various handle tools in daily life, more convenient and fast.
- Excellent performance: 100mm(3.9-inch) flat width, 10 Feet total length, -40 C to +105 C(-40 F to +221 F) temperature range, 80 C(176 F) shrinking temperature. Shrinkage Rate: 48% (cross-section), 5% (longitudinal);
- Excellent characteristics: PVC heat shrink tube has the features of durability, corrosion resistance and wear resistance, which can improve the stability of the battery and prevent mechanical wear and damage during long-term use of the battery.
- Environmental-Friendly: Compared with traditional battery production methods, PVC heat shrink tube can be recycled, eco-friendly, reducing the amount of waste that ends up in landfills, which is conducive to environmental protection.
- Easy Operation & Cost savings: The installation of PVC heat shrink tubing is simple, easy to install and use. At the same time, its high transparency, easy shrinkage, high strength characteristics make it strong operability, can freely adjust the shrinkage rate according to user needs, saving raw materials.
- See more on Amazon...
Brand: HSZJsto | Manufacturer: HSZJsto
Weight: 0.27 pounds
See On Amazon #6
uxcell 2Meters 85mm Width PVC Heat Shrink Wrap Tube Blue for 18650 Battery Pack
Asin: B01736E10S | Model: a15012900ux0399 | PartNumber: a15012900ux0399 | Ean: 0711331551276 | UPC: 711331551276
Flat Width: 85Mm/3.35Inch; Length: 2M; Temperature Range: -55℃ To +105℃; Heating Tool: Hot Air Tools.
Insulation, Stable Performance And Fast Shrinkage..
Insulation, Stable Performance And Fast Shrinkage..
Shrinkable Temperature:98°C; Shrinking Rate: 48%(Cross Section)And 5%(Longitudinal).
Features
- This PVC heat shrink tube is a great items for protecting and repairing the cover.
- Shrinkable Temperature:98 C; Shrinking Rate: 48%(cross section)and 5%(longitudinal)
- Flat Width: 85mm/3.35inch; Length: 2m; Temperature Range: -55 to +105 ; Heating tool: Hot Air Tools
- Insulation, stable performance and fast shrinkage.
- Insulation, stable performance and fast shrinkage.
- See more on Amazon...
Brand: uxcell | Manufacturer: Uxcell
See On Amazon #7
MECCANIXITY Battery Wrap PVC Heat Shrink Tubing 48mm Dia 75mm Flat 10 Feet Clear Good Insulation for Battery Pack
Asin: B097ZNZZ1P | Model: mea210427ee0072 | PartNumber: mea210427ee0072
Battery Wrap Tube Is With Good Insulation, Can Not Only Wrap And Protect The Battery Pack, Prevent Dust For The Battery Pack, But Also Beautify The Battery Pack. With Good Insulation, Pvc Heat Shrink Tubing Can Also Be Used For The Protection Of Electronic Components, And Led Pins..
Notice: Heat Gun Is Usually Used As Heating Tool. When Using The Heat Gun To Heat, Pay Attention To Move Back And Forth To Make The Heat Shrink Tube Heated As A Whole..
Steps Of Installation:1.Prepare Heat Shrink Tube, Cut It To The Length You Want ; 2.Put Battery In The Heat Shrink Tube ; 3.Shrink With Heat Gun.
The Pvc Heat Shrink Wrap Tube Is In Size Of: 48Mm Dia, 75Mm(3-Inch) Flat Width, 10 Feet Total Length, -40°C To +105°C(-40°F To +221°F) Temperature Range, 80°C(176°F) Shrinking Temperature.
Features
- PVC heat shrink wrap tube can be used for big battery or battery pack protection, such as 18650, 21700, AA, AAA battery packs. Battery wraps can be used for protection for batteries pack, electronic components, LED pins, etc. PVC heat shrinkable tube can also be used for DIY of various handle tools in daily life, more convenient and fast.
- The PVC heat shrink wrap tube is in size of: 48mm dia, 75mm(3-inch) flat width, 10 Feet total length, -40 C to +105 C(-40 F to +221 F) temperature range, 80 C(176 F) shrinking temperature
- Battery wrap tube is with good insulation, can not only wrap and protect the battery pack, prevent dust for the battery pack, but also beautify the battery pack. With good insulation, PVC heat shrink tubing can also be used for the protection of electronic components, and LED pins.
- Steps of installation:1.Prepare heat shrink tube, cut it to the length you want ; 2.Put battery in the heat shrink tube ; 3.Shrink with heat gun
- Notice: heat gun is usually used as heating tool. When using the heat gun to heat, pay attention to move back and forth to make the heat shrink tube heated as a whole.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #8
MECCANIXITY Battery Wrap PVC Heat Shrink Tubing 38mm Dia 60mm Flat 10 Feet Clear Good Insulation for Battery Pack
Asin: B097ZQGCSB | Model: mea210427ee0051 | PartNumber: mea210427ee0051
Battery Wrap Tube Is With Good Insulation, Can Not Only Wrap And Protect The Battery Pack, Prevent Dust For The Battery Pack, But Also Beautify The Battery Pack. With Good Insulation, Pvc Heat Shrink Tubing Can Also Be Used For The Protection Of Electronic Components, And Led Pins..
Notice: Heat Gun Is Usually Used As Heating Tool. When Using The Heat Gun To Heat, Pay Attention To Move Back And Forth To Make The Heat Shrink Tube Heated As A Whole..
Steps Of Installation:1.Prepare Heat Shrink Tube, Cut It To The Length You Want ; 2.Put Battery In The Heat Shrink Tube ; 3.Shrink With Heat Gun.
The Pvc Heat Shrink Wrap Tube Is In Size Of: 38Mm Dia, 60Mm(2.36-Inch) Flat Width, 10 Feet Total Length, -40°C To +105°C(-40°F To +221°F) Temperature Range, 80°C(176°F) Shrinking Temperature.
Features
- PVC heat shrink wrap tube can be used for big battery or battery pack protection, such as 18650, 21700, AA, AAA battery packs. Battery wraps can be used for protection for batteries pack, electronic components, LED pins, etc. PVC heat shrinkable tube can also be used for DIY of various handle tools in daily life, more convenient and fast.
- The PVC heat shrink wrap tube is in size of: 38mm dia, 60mm(2.36-inch) flat width, 10 Feet total length, -40 C to +105 C(-40 F to +221 F) temperature range, 80 C(176 F) shrinking temperature
- Battery wrap tube is with good insulation, can not only wrap and protect the battery pack, prevent dust for the battery pack, but also beautify the battery pack. With good insulation, PVC heat shrink tubing can also be used for the protection of electronic components, and LED pins.
- Steps of installation:1.Prepare heat shrink tube, cut it to the length you want ; 2.Put battery in the heat shrink tube ; 3.Shrink with heat gun
- Notice: heat gun is usually used as heating tool. When using the heat gun to heat, pay attention to move back and forth to make the heat shrink tube heated as a whole.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #9
uxcell Battery Wrap PVC Heat Shrink Tubing 65mm Flat Width for AA Power Supplies 5 Meters Length Blue
Asin: B07DYWLMS2 | Model: a18051400ux0393 | PartNumber: a18051400ux0393
Flat Width: 65Mm/2.56-Inch; Length: 5M/16.4Ft; Temperature Range: -40℃ To +105℃; Heating Tool: Hot Air Tools.
Please Note: Please Place Pvc Heat Shrink Tube In A Cool Place To Prevent Deformation Due To High Temperature..
Good Insulation, Soft, Stable Performance, Quick Shrinkage..
Shrinkable Temperature:80℃; Shrinking Rate: 48%(Cross Section)And 5%(Longitudinal).
Features
- PVC heat shrink tubing for AA power supply.
- Shrinkable Temperature:80 ; Shrinking Rate: 48%(cross section)and 5%(longitudinal)
- Flat Width: 65mm/2.56-inch; Length: 5M/16.4ft; Temperature Range: -40 to +105 ; Heating tool: Hot Air Tools
- Good insulation, soft, stable performance, quick shrinkage.
- Please Note: Please place PVC heat shrink tube in a cool place to prevent deformation due to high temperature.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.97 x 4.72 x 3.94 inches
See On Amazon #10
MECCANIXITY Battery Wrap PVC Heat Shrink Tubing 191mm Dia 300mm Flat 190mm Dia 1m Black Good Insulation for Battery Pack
Asin: B097ZQNJX6 | Model: mea210427ee0137 | PartNumber: mea210427ee0137
Battery Wrap Tube Is With Good Insulation, Can Not Only Wrap And Protect The Battery Pack, Prevent Dust For The Battery Pack, But Also Beautify The Battery Pack. With Good Insulation, Pvc Heat Shrink Tubing Can Also Be Used For The Protection Of Electronic Components, And Led Pins..
Notice: Heat Gun Is Usually Used As Heating Tool. When Using The Heat Gun To Heat, Pay Attention To Move Back And Forth To Make The Heat Shrink Tube Heated As A Whole..
Steps Of Installation:1.Prepare Heat Shrink Tube, Cut It To The Length You Want ; 2.Put Battery In The Heat Shrink Tube ; 3.Shrink With Heat Gun.
The Pvc Heat Shrink Wrap Tube Is In Size Of: 191Mm Dia, 300Mm(11.8-Inch) Flat Width, 190Mm/7.5 Inch Dia, 1M Total Length, -40°C To +105°C(-40°F To +221°F) Temperature Range, 80°C(176°F) Shrinking Temperature.
Features
- PVC heat shrink wrap tube can be used for big battery or battery pack protection, such as 18650, 21700, AA, AAA battery packs. Battery wraps can be used for protection for batteries pack, electronic components, LED pins, etc. PVC heat shrinkable tube can also be used for DIY of various handle tools in daily life, more convenient and fast.
- The PVC heat shrink wrap tube is in size of: 191mm dia, 300mm(11.8-inch) flat width, 190mm/7.5 inch dia, 1m total length, -40 C to +105 C(-40 F to +221 F) temperature range, 80 C(176 F) shrinking temperature
- Battery wrap tube is with good insulation, can not only wrap and protect the battery pack, prevent dust for the battery pack, but also beautify the battery pack. With good insulation, PVC heat shrink tubing can also be used for the protection of electronic components, and LED pins.
- Steps of installation:1.Prepare heat shrink tube, cut it to the length you want ; 2.Put battery in the heat shrink tube ; 3.Shrink with heat gun
- Notice: heat gun is usually used as heating tool. When using the heat gun to heat, pay attention to move back and forth to make the heat shrink tube heated as a whole.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon
Looking For Something Else?
Search