SCUBAPRO S-Tek Pure System, Harness, Donut Wing 40lbs/18kg
Asin: B0985TBFP9 | Model: 22.248.040 | PartNumber: 22.248.040 | Ean: 4048336423366
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Stainless Steel Waist Buckle Allows For A Full Range Of Adjustment..
Donut Wing Is Constructed Of Durable 1000D Cordura Outer Shell And 500D Cordura Inner Bladder..
Back Plate Provides Mounting Points For Trim Weights, An Argon Tank Mounting Point And A Convenient Built-In Carry Handle..
Branded Silicone Epaulet On The Left Shoulder And Branded Silicone Guide Bands Keep Inflator Hose And Straps In Place..
Evo Angle Webbing Slots Allow For A More Natural Webbing Routing That Increases Diver Comfort And Reduces Abrasion..
Recessed Wing Nut Socket Features S-Tek Ergo Nuts That Are Ergonomically Designed To Be Used With Cold, Wet Or Gloved Hands, Easy To Tighten/Loosen And Flush Mounted To Prevent Suit Abrasion. Recessed Wing Nut Socket Is Also Compatible With Standard Wing Nuts..
3D Formed Back Plate Features A Softened Organic Shape, Curved Central Profile And Fully Radiused Edges For Greater Comfort.
Two Pre-Bent D-Rings On The Shoulders, One D-Ring On The Waist, And Two D-Rings On The Crotch Strap Are Provided For Clipping On Extra Gear..
Configuration Options Include Fixed-Shoulder Length Harness For Ultimate Simplicity Or Extender Mode That Allows The Shoulder Straps To Extend For Easier Doffing & Donning..
Features
- Continuous webbing harness provides a custom, individualized fit.
- Configuration options include fixed-shoulder length harness for ultimate simplicity or Extender mode that allows the shoulder straps to extend for easier doffing & donning.
- Stainless steel waist buckle allows for a full range of adjustment.
- 3D formed back plate features a softened organic shape, curved central profile and fully radiused edges for greater comfort
- EVO Angle webbing slots allow for a more natural webbing routing that increases diver comfort and reduces abrasion.
- Recessed Wing Nut Socket features S-Tek Ergo Nuts that are ergonomically designed to be used with cold, wet or gloved hands, easy to tighten/loosen and flush mounted to prevent suit abrasion. Recessed Wing Nut socket is also compatible with standard wing nuts.
- Back plate provides mounting points for trim weights, an argon tank mounting point and a convenient built-in carry handle.
- Branded silicone epaulet on the left shoulder and branded silicone guide bands keep inflator hose and straps in place.
- Two pre-bent D-rings on the shoulders, one D-ring on the waist, and two D-rings on the crotch strap are provided for clipping on extra gear.
- Donut wing is constructed of durable 1000D Cordura outer shell and 500D Cordura inner bladder.
- See more on Amazon...
First Available: 01/01/2021
Brand: Scubapro | Manufacturer: SCUBAPRO
Dimensions: 5.00 x 27.00 x 5.00 inches | Weight: 11.60 pounds
Warranty: limited warranty
See On Amazon Similar To SCUBAPRO STek Pure System Harness
#1
SCUBAPRO Dive Regulator Vinyl Mouthpiece, Black
Asin: B015RJPHGU | Model: 01.040.131 | PartNumber: 01.040.131 | Ean: 4048336091442
Food Grade Vinyl Black Standard Sized Mouthpiece.
Does Not Come In Clam Shell Packaging Sold In Bulk.
Will Fit Most Regulators As Well As Most Snorkels.
Does Not Come In Clam Shell Packaging Sold In Bulk, Scubapro Black Vinyl Food Grade Mouthpiece.
Features
- This mouthpiece is recommended for SCUBAPRO second stage models R295, R395, R095, S360, S555, S560, S600
- Does not come in clam shell packaging sold in bulk, Scubapro Black Vinyl Food Grade Mouthpiece
- Food Grade Vinyl Black Standard Sized mouthpiece
- Will fit most regulators as well as most snorkels
- Does not come in clam shell packaging sold in bulk
- See more on Amazon...
First Available: 01/01/2011
Brand: Scubapro | Manufacturer: SCUBAPRO
Warranty: 1 year limited warranty
See On Amazon #2
Scubapro Universal Hanger Black
Asin: B00AAPDRPA | Model: 51.056.000 | PartNumber: 51.056.000 | Ean: 4048336108355
Wetsuit Hangs Over Central Bar Or Shoulder Hook..
Extra Tank-Valve O-Rings Nest In Indentation..
Booties Are Pinched By Retainers..
Bc Slips Under Shoulder Hooks..
Features
- Regulator slips into central U-hook.
- BC slips under shoulder hooks.
- Wetsuit hangs over central bar or shoulder hook.
- Booties are pinched by retainers.
- Extra tank-valve O-rings nest in indentation.
- See more on Amazon...
Brand: Scubapro | Manufacturer: Scubapro
Weight: 1.00 Pounds
See On Amazon #3
Scubapro Comfort Mask Strap - Black
Asin: B074YYG56H | Model: 24.730.050 | PartNumber: 24.730.050 | Ean: 4048336366984
Easy To Attach, Easy To Use. One Size Fits All For Total Convenience..
Applicable Masks:Crystal Vu Plus, Devil, Ghost, Mini Vu, Sardine, Scout, Spectra Trufit, Steel Pro, Steel Comp, Synergy 2, Synergy Mini, Synergy Twin, Synergy 2 Twin, Sub Vu Mini, Trinidad 3, Zoom.
Enhances Mask Comfort And Protects Hair From Knots And Pulls..
Uses The Same Design Concept As A Strap Used On Ski Goggles..
Features
- Ideal addition to any diving or snorkeling mask.
- Uses the same design concept as a strap used on ski goggles.
- Easy to attach, easy to use. One size fits all for total convenience.
- Enhances mask comfort and protects hair from knots and pulls.
- APPLICABLE MASKS:Crystal Vu Plus, Devil, Ghost, Mini Vu, Sardine, Scout, Spectra Trufit, Steel Pro, Steel Comp, Synergy 2, Synergy Mini, Synergy Twin, Synergy 2 Twin, Sub Vu Mini, Trinidad 3, Zoom
- See more on Amazon...
First Available: 01/01/2017
Brand: Scubapro | Manufacturer: SCUBAPRO
Dimensions: 1.00 x 7.00 x 2.10 inches | Weight: 0.10 Pounds
Warranty: 1 year limited warranty
See On Amazon #4
Scubapro Din Conversion Kit/Universal
Asin: B0000DYVG3 | Model: ABCD | PartNumber: ABCD | Ean: 4048336095174
Features
- Din Conversion Kit Universal (MK10, MK14, MK16, MK17, MK18, MK20, MK25) This adapter allows you to easily convert your first stage, if required, so you can use your own gear rather than rental gear!
- See more on Amazon...
Brand: Scubapro | Manufacturer: Scubapro
Dimensions: 3.13 x 2.10 x 1.75 Inches | Weight: 0.20 pounds
See On Amazon #5
Scubapro Jet Fins - Strap
Asin: B0060DELCO | Ean: 4250770812914
Brand: Scubapro | Manufacturer: Scubapro
See On Amazon #6
Scubapro MK25 EVO/S620 Ti Dive Regulator System, INT, Black, One Size
Asin: B01MEEQ9DG | Model: 12.620.000 | PartNumber: 12.620.000 | Ean: 4048336330688
Scubapro’S Patented Extended Thermal Insulating System Insulates The Inner Mechanism, Improving Cold-Water Resistance Without Compromising Breathing Performance..
Large Diaphragm Fits Inside A More Compact Second Stage Casing For Maximum Breathing Sensitivity..
Air Balanced Second Stage Valve Smoothes Out The Inhalation Effort At Varying Depths And Supply Pressures..
Second Stage’S Rugged Reinforced Technopolymer Case And Front Cover With Stainless Steel Frame Looks Good Plus Is Able To Withstand Years Of Aggressive Diving..
Driven To Constantly Innovate And Improve The Diving Experience, Scubapro Builds Flawless Equipment For The Work, Sport, And Lifestyle Of People Whose Passion Is Found Below The Surface..
External Intermediate Pressure Adjustment Enables Technicians To Fine-Tune Performance Quickly And Easily..
The Regulator Includes Two Opposing High-Pressure Ports That Let You Position The First Stage Up Or Down, Along With Four High-Flow And One Axial Super-High-Flow Low-Pressure Ports..
Full Titanium Barrel Is Rugged, Anti-Corrosion And Lightweight For Long-Term Reliability..
An Air-Balanced Flow-Through Piston Housed In A Chrome-Plated Brass Body Provides Constant Airflow Unaffected By Depth, Tank Pressure, Or Breathing Rate..
Features
- Smaller and lighter than the S600 but using the same-sized diaphragm, the S620 Ti delivers instant air on demand with super inhalation sensitivity.
- An air-balanced flow-through piston housed in a chrome-plated brass body provides constant airflow unaffected by depth, tank pressure, or breathing rate.
- SCUBAPRO S patented Extended Thermal Insulating System insulates the inner mechanism, improving cold-water resistance without compromising breathing performance.
- The regulator includes two opposing high-pressure ports that let you position the first stage up or down, along with four high-flow and one axial super-high-flow low-pressure ports.
- Driven to constantly innovate and improve the diving experience, SCUBAPRO builds flawless equipment for the work, sport, and lifestyle of people whose passion is found below the surface.
- External intermediate pressure adjustment enables technicians to fine-tune performance quickly and easily.
- Air balanced second stage valve smoothes out the inhalation effort at varying depths and supply pressures.
- Second stage s rugged reinforced technopolymer case and front cover with stainless steel frame looks good plus is able to withstand years of aggressive diving.
- Full titanium barrel is rugged, anti-corrosion and lightweight for long-term reliability.
- Large diaphragm fits inside a more compact second stage casing for maximum breathing sensitivity.
- See more on Amazon...
First Available: 01/01/2017
Brand: Scubapro | Manufacturer: SCUBAPRO
Dimensions: 5.00 x 10.00 x 7.00 inches | Weight: 2.00 pounds
Warranty: limited warranty
See On Amazon #7
SCUBAPRO S-Tek Back Plate Pad Color Kit, Black
Asin: B09863ZP9L | Model: 23.611.000 | PartNumber: 23.611.000 | Ean: 4048336422154
Available For The S-Tek Pro System, S-Tek Pro Harness, S-Tek Pure System And S-Tek Pure Harness.
Each Color Pad Kit Includes A Back Pad And All Mounting Hardware..
Features
- Molded Monprene material .
- Each color pad kit includes a back pad and all mounting hardware.
- Available for the S-Tek Pro System, S-Tek Pro Harness, S-Tek Pure System and S-Tek Pure Harness
- See more on Amazon...
First Available: 01/01/2021
Brand: Scubapro | Manufacturer: SCUBAPRO
Dimensions: 1.00 x 1.00 x 1.00 inches | Weight: 0.40 Pounds
Warranty: 1 year limited warranty
See On Amazon #8
Scubapro MK25 EVO/A700 Diving Regulator System, INT
Asin: B00RB2L2TS | Model: 12.770.040 | PartNumber: 12.770.040 | Ean: 0751738165300, 4048336292788, 0647732649512 | UPC: 647732649512, 751738165300
Regulator Includes Two Opposing High-Pressure Ports That Let You Position The First Stage Up Or Down, Along With Four High-Flow And One Axial Super-High-Flow Low-Pressure Ports On A Swivel Turret..
Sectional Exhaust Tee And A First-Rate Purge Help To Deliver Effortless Inhalation And An Ease Of Exhalation That Is Unmatched..
Rugged Full Metal Second Stage Case And Valve Housing (Barrel) Are Able To Withstand Years Of Aggressive Diving..
Metal Second Stage Case Construction Enables The Use Of A Larger Diaphragm Inside A Compact Casing, Increasing Breathing Sensitivity..
Featuring An Int Connector, Anti-Freeze Protection Makes This Regulator Suitable For Cold, Temperate, And Warm Waters..
External Intermediate Pressure Adjustment Enables Technicians To Fine-Tune Performance Quickly And Easily..
Dive Confidently At Varying Depths With The Intuitive User Controls, Which Include A Diver-Adjustable Inhalation Effort Knob, First-Rate Purge, And A Coaxial Viva Switch To Control Free Flow..
Air Balanced Second Stage Valve Smoothes Out The Inhalation Effort When Diving At Varying Depths And Supply Pressures..
Scubapro's Extended Thermal Insulating System Thermally Insulates The Mechanical Elements, Increasing Cold-Water Resistance And Delaying Ice Formation In Extreme Environments..
Features
- Housed in a chrome-plated body, the regulator's air-balanced piston first stage delivers consistent and effortless airflow, regardless of depth, tank pressure, or breathing rate.
- SCUBAPRO's Extended Thermal Insulating System thermally insulates the mechanical elements, increasing cold-water resistance and delaying ice formation in extreme environments.
- Regulator includes two opposing high-pressure ports that let you position the first stage up or down, along with four high-flow and one axial super-high-flow low-pressure ports on a swivel turret.
- Dive confidently at varying depths with the intuitive user controls, which include a diver-adjustable inhalation effort knob, first-rate purge, and a coaxial VIVA switch to control free flow.
- Featuring an INT connector, anti-freeze protection makes this regulator suitable for cold, temperate, and warm waters.
- External intermediate pressure adjustment enables technicians to fine-tune performance quickly and easily.
- Rugged full metal second stage case and valve housing (barrel) are able to withstand years of aggressive diving.
- Metal second stage case construction enables the use of a larger diaphragm inside a compact casing, increasing breathing sensitivity.
- Air balanced second stage valve smoothes out the inhalation effort when diving at varying depths and supply pressures.
- Sectional exhaust tee and a first-rate purge help to deliver effortless inhalation and an ease of exhalation that is unmatched.
- See more on Amazon...
First Available: 01/01/2015
Brand: Scubapro | Manufacturer: SCUBAPRO
Dimensions: 8.00 x 14.00 x 12.00 inches | Weight: 2.00 Pounds
Warranty: limited warranty
See On Amazon #9
SCUBAPRO S-Tek Pro Harness, with Stainless Steel Back Plate
Asin: B09888S7HG | Model: 22.242.001 | PartNumber: 22.242.001 | Ean: 4048336422093
3D Formed Back Plate Features A Softened Organic Shape, Curved Central Profile And Fully Radiused Edges For Greater Comfort.
Branded Silicone Epaulet On The Left Shoulder And Branded Silicone Guide Bands Keep Inflator Hose And Straps In Place..
Two Pre-Bent D-Rings On The Shoulders, One D-Ring On The Waist, And Two D-Rings On The Crotch Strap Are Provided For Clipping On Extra Gear..
Recessed Wing Nut Socket Features S-Tek Ergo Nuts That Are Ergonomically Designed To Be Used With Cold, Wet Or Gloved Hands, Easy To Tighten/Loosen And Flush Mounted To Prevent Suit Abrasion. Recessed Wing Nut Socket Is Also Compatible With Standard Wing Nuts..
Back Plate Provides Mounting Points For Trim Weights, An Argon Tank Mounting Point And A Convenient Built-In Carry Handle..
Evo Angle Webbing Slots Allow For A More Natural Webbing Routing That Increases Diver Comfort And Reduces Abrasion..
Shoulder Buckle And D-Ring Heights Can Be Adjusted To Suit Different Torso Lengths..
Features
- Molded Monprene pads cushion shoulders, waist and back for increased comfort.
- Shoulder buckle and D-ring heights can be adjusted to suit different torso lengths.
- 3D formed back plate features a softened organic shape, curved central profile and fully radiused edges for greater comfort
- EVO Angle webbing slots allow for a more natural webbing routing that increases diver comfort and reduces abrasion.
- Recessed Wing Nut Socket features S-Tek Ergo Nuts that are ergonomically designed to be used with cold, wet or gloved hands, easy to tighten/loosen and flush mounted to prevent suit abrasion. Recessed Wing Nut socket is also compatible with standard wing nuts.
- Back plate provides mounting points for trim weights, an argon tank mounting point and a convenient built-in carry handle.
- Branded silicone epaulet on the left shoulder and branded silicone guide bands keep inflator hose and straps in place.
- Two pre-bent D-rings on the shoulders, one D-ring on the waist, and two D-rings on the crotch strap are provided for clipping on extra gear.
- See more on Amazon...
First Available: 01/01/2021
Brand: Scubapro | Manufacturer: SCUBAPRO
Dimensions: 17.70 x 3.20 x 11.50 inches | Weight: 8.60 pounds
Warranty: limited warranty
See On Amazon #10
SCUBAPRO MK11/C370 Diving Regulator System
Asin: B079CPYCQN | Model: 12.175.000 | PartNumber: 12.175.000 | Ean: 4048336388948
Sealed Internal Parts Within The Brass Body Keeps Water From Fouling The Mechanism While Improving The Regulator’S Performance In Cold Water..
Compact Hi-Flow Mouthpiece Improves Airflow As Well As Mouth Comfort, Fitting All Mouth Sizes..
User Controls Include A Diver-Adjustable Inhalation Effort Knob And Coaxial Dive/Pre-Dive Lever..
Large Purge Button Is Easy To Activate, Even Wearing Thick Gloves..
Driven To Constantly Innovate And Improve The Diving Experience, Scubapro Builds Flawless Equipment For The Work, Sport, And Lifestyle Of People Whose Passion Is Found Below The Surface..
Compact Second Stage Fiberglass Reinforced Nylon Casing With New Exhaust Tee Takes Up Little Space In A Dive Bag..
The Regulator Includes Two High-Pressure, Two Low-Pressure, And Two High-Flow Lp Ports To Maximize Your Hose Routing Options..
Super-Flow Hose Features An Oversized Bore That Allows More Air To Flow On Each Inhalation..
Equipped With An Air-Balanced Diaphragm First-Stage Design, The Regulator Delivers A Constant And Effortless Airflow Unaffected By Depth, Tank Pressure, Or Breathing Rate..
Features
- SCUBAPRO s marine-grade, chrome-plated brass body is specially designed to reduce size and weight, making the MK11/C370 an ideal travel companion.
- Equipped with an air-balanced diaphragm first-stage design, the regulator delivers a constant and effortless airflow unaffected by depth, tank pressure, or breathing rate.
- Sealed internal parts within the brass body keeps water from fouling the mechanism while improving the regulator s performance in cold water.
- The regulator includes two high-pressure, two low-pressure, and two high-flow LP ports to maximize your hose routing options.
- Driven to constantly innovate and improve the diving experience, SCUBAPRO builds flawless equipment for the work, sport, and lifestyle of people whose passion is found below the surface.
- Compact second stage fiberglass reinforced nylon casing with new exhaust tee takes up little space in a dive bag.
- User controls include a diver-adjustable inhalation effort knob and coaxial dive/pre-dive lever.
- Large purge button is easy to activate, even wearing thick gloves.
- Super-flow hose features an oversized bore that allows more air to flow on each inhalation.
- Compact Hi-Flow mouthpiece improves airflow as well as mouth comfort, fitting all mouth sizes.
- See more on Amazon...
First Available: 01/01/2018
Brand: Scubapro | Manufacturer: SCUBAPRO
Dimensions: 9.00 x 8.00 x 11.00 Inches | Weight: 3.45 pounds
Warranty: limited warranty
See On Amazon #11
Scubapro High Pressure Adapter/Quick Connector
Asin: B015RJPXW8 | Model: 01.334.005 | PartNumber: 01.334.005 | Ean: 4048336092999
Dive/Pre-Dive System Includes A Switch On The Top Of The Case With A Thumb Tab For Adjusting The Direction Of Airflow Right Out Of The Valve..
Diaphragm Is Located In The Lower Section Of The Casing To Take Advantage Of The Pressure Gradient In The Upright Position, Making Breathing Even Easier..
Casing Design Features Inner Winglets That Direct Airflow Towards The Exhaust Valve, Creating A Dramatic Improvement In Exhalation Effort..
Air-Balanced Progressive Flow Control Valve Is Able To Deliver Abundant Airflow With A Natural Smoothness Comparable To Breathing On The Surface..
Features
- Uniquely shaped fiberglass-reinforced nylon casing carries on the D-Series heritage with the latest advances in breathing performance technology
- Air-balanced Progressive Flow Control Valve is able to deliver abundant airflow with a natural smoothness comparable to breathing on the surface.
- Dive/pre-dive system includes a switch on the top of the case with a thumb tab for adjusting the direction of airflow right out of the valve.
- Casing design features inner winglets that direct airflow towards the exhaust valve, creating a dramatic improvement in exhalation effort.
- Diaphragm is located in the lower section of the casing to take advantage of the pressure gradient in the upright position, making breathing even easier.
- See more on Amazon...
Brand: Scubapro | Manufacturer: Scubapro
Dimensions: 0.70 x 2.75 x 0.70 inches | Weight: 0.20 pounds
See On Amazon #12
Scubapro Comfort Mask Strap - Black/Yellow
Asin: B074YYFFXK | Model: 24.730.030 | PartNumber: 24.730.030 | Ean: 4048336366960
Easy To Attach, Easy To Use. One Size Fits All For Total Convenience..
Applicable Masks:Crystal Vu Plus, Devil, Ghost, Mini Vu, Sardine, Scout, Spectra Trufit, Steel Pro, Steel Comp, Synergy 2, Synergy Mini, Synergy Twin, Synergy 2 Twin, Sub Vu Mini, Trinidad 3, Zoom.
Enhances Mask Comfort And Protects Hair From Knots And Pulls..
Uses The Same Design Concept As A Strap Used On Ski Goggles..
Features
- Ideal addition to any diving or snorkeling mask.
- Uses the same design concept as a strap used on ski goggles.
- Easy to attach, easy to use. One size fits all for total convenience.
- Enhances mask comfort and protects hair from knots and pulls.
- APPLICABLE MASKS:Crystal Vu Plus, Devil, Ghost, Mini Vu, Sardine, Scout, Spectra Trufit, Steel Pro, Steel Comp, Synergy 2, Synergy Mini, Synergy Twin, Synergy 2 Twin, Sub Vu Mini, Trinidad 3, Zoom
- See more on Amazon...
First Available: 01/01/2017
Brand: Scubapro | Manufacturer: SCUBAPRO
Dimensions: 1.00 x 7.00 x 2.10 inches | Weight: 0.10 pounds
Warranty: 1 year limited warranty
See On Amazon #13
SCUBAPRO S-Tek Pro System, Harness, Donut Wing 30, Single Tank Adapter
Asin: B0985V579Z | Model: 22.249.030 | PartNumber: 22.249.030 | Ean: 4048336423380
3D Formed Back Plate Features A Softened Organic Shape, Curved Central Profile And Fully Radiused Edges For Greater Comfort.
Improved Rounded Profile Reduces Air Trapping..
Branded Silicone Epaulet On The Left Shoulder And Branded Silicone Guide Bands Keep Inflator Hose And Straps In Place..
Two Pre-Bent D-Rings On The Shoulders, One D-Ring On The Waist, And Two D-Rings On The Crotch Strap Are Provided For Clipping On Extra Gear..
Recessed Wing Nut Socket Features S-Tek Ergo Nuts That Are Ergonomically Designed To Be Used With Cold, Wet Or Gloved Hands, Easy To Tighten/Loosen And Flush Mounted To Prevent Suit Abrasion. Recessed Wing Nut Socket Is Also Compatible With Standard Wing Nuts..
Back Plate Provides Mounting Points For Trim Weights, An Argon Tank Mounting Point And A Convenient Built-In Carry Handle..
Evo Angle Webbing Slots Allow For A More Natural Webbing Routing That Increases Diver Comfort And Reduces Abrasion..
Donut Wing Is Constructed Of Durable 1000D Cordura Outer Shell And 500D Cordura Inner Bladder..
Shoulder Buckle And D-Ring Heights Can Be Adjusted To Suit Different Torso Lengths..
Features
- Molded Monprene pads cushion shoulders, waist and back for increased comfort.
- Shoulder buckle and D-ring heights can be adjusted to suit different torso lengths.
- 3D formed back plate features a softened organic shape, curved central profile and fully radiused edges for greater comfort
- EVO Angle webbing slots allow for a more natural webbing routing that increases diver comfort and reduces abrasion.
- Recessed Wing Nut Socket features S-Tek Ergo Nuts that are ergonomically designed to be used with cold, wet or gloved hands, easy to tighten/loosen and flush mounted to prevent suit abrasion. Recessed Wing Nut socket is also compatible with standard wing nuts.
- Back plate provides mounting points for trim weights, an argon tank mounting point and a convenient built-in carry handle.
- Branded silicone epaulet on the left shoulder and branded silicone guide bands keep inflator hose and straps in place.
- Two pre-bent D-rings on the shoulders, one D-ring on the waist, and two D-rings on the crotch strap are provided for clipping on extra gear.
- Donut wing is constructed of durable 1000D Cordura outer shell and 500D Cordura inner bladder.
- Improved rounded profile reduces air trapping.
- See more on Amazon...
First Available: 01/01/2021
Brand: Scubapro | Manufacturer: SCUBAPRO
Dimensions: 4.00 x 18.00 x 11.75 inches | Weight: 5.00 pounds
Warranty: limited warranty
See On Amazon #14
Scubapro MK25T EVO/S620 X-Ti Dive Regulator System, INT, Black
Asin: B01MF79CSG | Model: 12.620.400 | PartNumber: 12.620.400 | Ean: 4048336358804
Scubapro's Patented Extended Thermal Insulating System Insulates The Inner Mechanism, Improving Cold-Water Resistance And Delaying Ice Formation Without Compromising Breathing Performance..
User Controls Include An Easy-Grip Diver-Adjustable Inhalation Effort Knob And Venturi-Initiated Vacuum Assist (Viva) Lever..
Rugged Reinforced Technopolymer Case And Front Cover With Stainless Steel Frame Looks Good Plus Is Able To Withstand Years Of Aggressive Diving..
Full Titanium Barrel Is Rugged, Anti-Corrosion And Lightweight For Long-Term Reliability..
Driven To Constantly Innovate And Improve The Diving Experience, Scubapro Builds High-Quality Equipment For The Work, Sport, And Lifestyle Of People Whose Passion Is Found Below The Surface..
Air Balanced Valve Smoothes Out The Inhalation Effort At Varying Depths And Supply Pressures..
Dive Confidently At Varying Depths With The Intuitive User Controls, Which Include An Easy-Grip, Diver-Adjustable Inhalation Effort Knob, A Large Purge Button, And A Coaxial Viva Switch To Control Free Flow..
Large Diaphragm Fits Inside A More Compact Casing For Maximum Breathing Sensitivity..
An Air-Balanced Flow-Through Piston Provides Effortless Airflow Unaffected By Depth, Tank Pressure, Or Breathing Rate..
Features
- The MK25T EVO is machined from a solid block of ultra-durable, lightweight titanium that won't corrode, even in concentrated saltwater conditions.
- An air-balanced flow-through piston provides effortless airflow unaffected by depth, tank pressure, or breathing rate.
- SCUBAPRO'S patented Extended Thermal Insulating System insulates the inner mechanism, improving cold-water resistance and delaying ice formation without compromising breathing performance.
- Dive confidently at varying depths with the intuitive user controls, which include an easy-grip, diver-adjustable inhalation effort knob, a large purge button, and a coaxial VIVA switch to control free flow.
- Driven to constantly innovate and improve the diving experience, SCUBAPRO builds high-quality equipment for the work, sport, and lifestyle of people whose passion is found below the surface.
- Air balanced valve smoothes out the inhalation effort at varying depths and supply pressures.
- Rugged reinforced technopolymer case and front cover with stainless steel frame looks good plus is able to withstand years of aggressive diving.
- Full titanium barrel is rugged, anti-corrosion and lightweight for long-term reliability.
- Large diaphragm fits inside a more compact casing for maximum breathing sensitivity.
- User controls include an easy-grip diver-adjustable inhalation effort knob and Venturi-Initiated Vacuum Assist (VIVA) lever.
- See more on Amazon...
First Available: 01/01/2017
Brand: Scubapro | Manufacturer: SCUBAPRO
Dimensions: 5.00 x 10.00 x 7.00 Inches | Weight: 3.00 pounds
Warranty: limited warranty
See On Amazon #15
SCUBAPRO S-Tek Pure Harness, with Stainless Steel Back Plate
Asin: B098896MDN | Model: 22.241.001 | PartNumber: 22.241.001 | Ean: 4048336422079
Stainless Steel Waist Buckle Allows A Full Range Of Adjustment..
Back Plate Provides Mounting Points For Trim Weights, An Argon Tank Mounting Point And A Convenient Built-In Carry Handle..
Branded Silicone Epaulet On The Left Shoulder And Branded Silicone Guide Bands Keep Inflator Hose And Straps In Place..
Evo Angle Webbing Slots Allow For A More Natural Webbing Routing That Increases Diver Comfort And Reduces Abrasion..
Recessed Wing Nut Socket Features S-Tek Ergo Nuts That Are Ergonomically Designed To Be Used With Cold, Wet Or Gloved Hands, Easy To Tighten/Loosen And Flush Mounted To Prevent Suit Abrasion. Recessed Wing Nut Socket Is Also Compatible With Standard Wing Nuts..
3D Formed Back Plate Features A Softened Organic Shape, Curved Central Profile And Fully Radiused Edges For Greater Comfort.
Two Pre-Bent D-Rings On The Shoulders, One D-Ring On The Waist, And Two D-Rings On The Crotch Strap Are Provided For Clipping On Extra Gear..
Configuration Options Include Fixed-Shoulder Length Harness For Ultimate Simplicity Or Extender Mode That Allows The Shoulder Straps To Extend For Easier Doffing & Donning..
Features
- Continuous webbing harness provides a custom, individualized fit.
- Configuration options include fixed-shoulder length harness for ultimate simplicity or Extender mode that allows the shoulder straps to extend for easier doffing & donning.
- Stainless steel waist buckle allows a full range of adjustment.
- 3D formed back plate features a softened organic shape, curved central profile and fully radiused edges for greater comfort
- EVO Angle webbing slots allow for a more natural webbing routing that increases diver comfort and reduces abrasion.
- Recessed Wing Nut Socket features S-Tek Ergo Nuts that are ergonomically designed to be used with cold, wet or gloved hands, easy to tighten/loosen and flush mounted to prevent suit abrasion. Recessed Wing Nut socket is also compatible with standard wing nuts.
- Back plate provides mounting points for trim weights, an argon tank mounting point and a convenient built-in carry handle.
- Branded silicone epaulet on the left shoulder and branded silicone guide bands keep inflator hose and straps in place.
- Two pre-bent D-rings on the shoulders, one D-ring on the waist, and two D-rings on the crotch strap are provided for clipping on extra gear.
- See more on Amazon...
First Available: 01/01/2021
Brand: Scubapro | Manufacturer: SCUBAPRO
Dimensions: 17.70 x 3.20 x 11.30 inches | Weight: 6.83 pounds
Warranty: limited warranty
See On Amazon #16
SCUBAPRO S-Tek Pro System, Harness, Donut Wing 40 lbs/18kg
Asin: B09866JKZH | Model: 22.249.040 | PartNumber: 22.249.040 | Ean: 4048336423397
3D Formed Back Plate Features A Softened Organic Shape, Curved Central Profile And Fully Radiused Edges For Greater Comfort.
Improved Rounded Profile Reduces Air Trapping..
Branded Silicone Epaulet On The Left Shoulder And Branded Silicone Guide Bands Keep Inflator Hose And Straps In Place..
Two Pre-Bent D-Rings On The Shoulders, One D-Ring On The Waist, And Two D-Rings On The Crotch Strap Are Provided For Clipping On Extra Gear..
Recessed Wing Nut Socket Features S-Tek Ergo Nuts That Are Ergonomically Designed To Be Used With Cold, Wet Or Gloved Hands, Easy To Tighten/Loosen And Flush Mounted To Prevent Suit Abrasion. Recessed Wing Nut Socket Is Also Compatible With Standard Wing Nuts..
Back Plate Provides Mounting Points For Trim Weights, An Argon Tank Mounting Point And A Convenient Built-In Carry Handle..
Evo Angle Webbing Slots Allow For A More Natural Webbing Routing That Increases Diver Comfort And Reduces Abrasion..
Donut Wing Is Constructed Of Durable 1000D Cordura Outer Shell And 500D Cordura Inner Bladder..
Shoulder Buckle And D-Ring Heights Can Be Adjusted To Suit Different Torso Lengths..
Features
- Molded Monprene pads cushion shoulders, waist and back for increased comfort.
- Shoulder buckle and D-ring heights can be adjusted to suit different torso lengths.
- 3D formed back plate features a softened organic shape, curved central profile and fully radiused edges for greater comfort
- EVO Angle webbing slots allow for a more natural webbing routing that increases diver comfort and reduces abrasion.
- Recessed Wing Nut Socket features S-Tek Ergo Nuts that are ergonomically designed to be used with cold, wet or gloved hands, easy to tighten/loosen and flush mounted to prevent suit abrasion. Recessed Wing Nut socket is also compatible with standard wing nuts.
- Back plate provides mounting points for trim weights, an argon tank mounting point and a convenient built-in carry handle.
- Branded silicone epaulet on the left shoulder and branded silicone guide bands keep inflator hose and straps in place.
- Two pre-bent D-rings on the shoulders, one D-ring on the waist, and two D-rings on the crotch strap are provided for clipping on extra gear.
- Donut wing is constructed of durable 1000D Cordura outer shell and 500D Cordura inner bladder.
- Improved rounded profile reduces air trapping.
- See more on Amazon...
First Available: 01/01/2021
Brand: Scubapro | Manufacturer: SCUBAPRO
Dimensions: 4.00 x 18.00 x 11.75 inches | Weight: 0.10 pounds
Warranty: limited warranty
See On Amazon #17
SCUBAPRO S-Tek Pure System, Harness, Donut Wing 30, Single Tank Adapter
Asin: B0985WHCVQ | Model: 22.248.030 | PartNumber: 22.248.030 | Ean: 4048336423359
Stainless Steel Waist Buckle Allows For A Full Range Of Adjustment..
Donut Wing Is Constructed Of Durable 1000D Cordura Outer Shell And 500D Cordura Inner Bladder..
Back Plate Provides Mounting Points For Trim Weights, An Argon Tank Mounting Point And A Convenient Built-In Carry Handle..
Branded Silicone Epaulet On The Left Shoulder And Branded Silicone Guide Bands Keep Inflator Hose And Straps In Place..
Evo Angle Webbing Slots Allow For A More Natural Webbing Routing That Increases Diver Comfort And Reduces Abrasion..
Recessed Wing Nut Socket Features S-Tek Ergo Nuts That Are Ergonomically Designed To Be Used With Cold, Wet Or Gloved Hands, Easy To Tighten/Loosen And Flush Mounted To Prevent Suit Abrasion. Recessed Wing Nut Socket Is Also Compatible With Standard Wing Nuts..
3D Formed Back Plate Features A Softened Organic Shape, Curved Central Profile And Fully Radiused Edges For Greater Comfort.
Two Pre-Bent D-Rings On The Shoulders, One D-Ring On The Waist, And Two D-Rings On The Crotch Strap Are Provided For Clipping On Extra Gear..
Configuration Options Include Fixed-Shoulder Length Harness For Ultimate Simplicity Or Extender Mode That Allows The Shoulder Straps To Extend For Easier Doffing & Donning..
Features
- Continuous webbing harness provides a custom, individualized fit.
- Configuration options include fixed-shoulder length harness for ultimate simplicity or Extender mode that allows the shoulder straps to extend for easier doffing & donning.
- Stainless steel waist buckle allows for a full range of adjustment.
- 3D formed back plate features a softened organic shape, curved central profile and fully radiused edges for greater comfort
- EVO Angle webbing slots allow for a more natural webbing routing that increases diver comfort and reduces abrasion.
- Recessed Wing Nut Socket features S-Tek Ergo Nuts that are ergonomically designed to be used with cold, wet or gloved hands, easy to tighten/loosen and flush mounted to prevent suit abrasion. Recessed Wing Nut socket is also compatible with standard wing nuts.
- Back plate provides mounting points for trim weights, an argon tank mounting point and a convenient built-in carry handle.
- Branded silicone epaulet on the left shoulder and branded silicone guide bands keep inflator hose and straps in place.
- Two pre-bent D-rings on the shoulders, one D-ring on the waist, and two D-rings on the crotch strap are provided for clipping on extra gear.
- Donut wing is constructed of durable 1000D Cordura outer shell and 500D Cordura inner bladder.
- See more on Amazon...
First Available: 01/01/2021
Brand: Scubapro | Manufacturer: SCUBAPRO
Dimensions: 5.00 x 27.20 x 5.20 inches | Weight: 13.40 Pounds
Warranty: limited warranty
See On Amazon #18
Scubapro Hydros Pro BCD Shoulder Assembly Kit (Midi)
Asin: B0CKM13ZK6 | Ean: 4048336407328
Brand: Scubapro | Manufacturer: Scubapro
Weight: 1.00 Pounds
See On Amazon #19
SCUBAPRO Argon Strap Kit, Back Plate Mount
Asin: B0B6XVWDSC | Model: 23.617.001 | PartNumber: 23.617.001 | Ean: 4048336428576
Argon Tank Attachment Offers A Rubber Grip Pad, Hook And Loop Strap And Lower Band With Tank Neck Cradle Cord..
Heavy-Duty Bungee Cord Secures Upper End Of The Argon Tank To The Back Plate..
Back Plate Attachment Is Simple With The Webbing Threading Through The Special Slot On The Back Plate And Affixing With The Included Quad-Glide For Secure Attachment..
Features
- Includes 1 tank mount band and heavy-duty bungee cord for back plate & Argon tank attachment.
- Back plate attachment is simple with the webbing threading through the special slot on the back plate and affixing with the included Quad-Glide for secure attachment.
- Argon Tank attachment offers a rubber grip pad, hook and loop strap and lower band with tank neck cradle cord.
- Heavy-duty bungee cord secures upper end of the Argon Tank to the back plate.
- See more on Amazon...
First Available: 01/01/2022
Brand: Scubapro | Manufacturer: SCUBAPRO
Weight: 0.10 pounds
Warranty: 1 year limited warranty
See On Amazon
Looking For Something Else?
Search