CNBTR 20 x 20 mm TES1-4902 White Thermoelectric Peltier Cooler Plate Module Pack of 4
Asin: B098JTRFQ6 | Model: M6210601015 | PartNumber: M6210601015
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.It Is A Solid Piece That Does Not Need Any Refrigerant And Work Continuously, There Is No Pollution Source, No Rotating Parts, No Rotation Effect, No Sliding Part, There Is No Vibration, Noise, Long Life And Easy Installation..
If You Have Any Question About The Product, Feel Free To Contact The Cnbtr Service And We Will Try Our Best To Give You A Satisfactory Answer..
The Item Contains 4 Pieces Thermoelectric Peltier Cooler..
Used In Various Small Areas That Require Heat Dissipation And Cooling..
Features
- The wiring method is positive for the red wire and negative for the black wire; the literal surface is the heat dissipation surface, and the non-literal surface is the heat dissipation surface.
- Used in various small areas that require heat dissipation and cooling.
- It is a solid piece that does not need any refrigerant and work continuously, there is no pollution source, no rotating parts, no rotation effect, no sliding part, there is no vibration, noise, long life and easy installation.
- The item contains 4 pieces Thermoelectric Peltier Cooler.
- If you have any question about the product, feel free to contact the CNBTR Service and we will try our best to give you a satisfactory answer.
- See more on Amazon...
Brand: CNBTR | Manufacturer: yqltd
See On Amazon Similar To CNBTR 20 x 20 mm
#1
CNBTR European Standard Aluminum Plastic Extrusion End Cap Industrial 20x20x8mm Pack of 20
Asin: B0747QJKMV | Model: M6170717105 | PartNumber: M6170717105
Widely Application: This Aluminum Profile Pipe End Cap Is Very Suitable For Preventing Wear On The Kitchen Or Wood Floor, Or As A Protection For Sliding Over The Chair Tip, Bench Foot, Table Leg, Bar Stool Foot Slider, Garden Furniture Plug-In, Etc..
Precautions: It Is Not Suitable For T Slot Guide Rail And V Slot Guide Rail..
Easy To Use: These End Covers Can Be Pressed In By Hand And Then Nailed Into The Central Hole With A Small Hammer Or Plastic Mallet..
Applicable Profiles: Suitable For 2020 European Standard Profiles. It Is Installed On The End Face Of Aluminum Profile, Which Not Only Increases Beauty But Also Ensures Safety..
Features
- Number of holes: single hole, middle diameter about 5.3mm, inner diameter about 2.9mm, size: 20x20x8mm
- Applicable Profiles: suitable for 2020 European standard profiles. It is installed on the end face of aluminum profile, which not only increases beauty but also ensures safety.
- Widely Application: this aluminum profile pipe end cap is very suitable for preventing wear on the kitchen or wood floor, or as a protection for sliding over the chair tip, bench foot, table leg, bar stool foot slider, garden furniture plug-in, etc.
- Easy To Use: These end covers can be pressed in by hand and then nailed into the central hole with a small hammer or plastic mallet.
- Precautions: It is not suitable for T slot guide rail and V slot guide rail.
- See more on Amazon...
Brand: CNBTR | Manufacturer: yqltd
See On Amazon #2
CNBTR Horizontal Linear Motion Ball Bearing Slide Bushing 8mm Dia &Shaft Optical Axis 300mm Linear with Rod Rail Support Set
Asin: B01KLE9UDM | Model: CNBTR4042 | PartNumber: CNBTR4042 | Ean: 6936536851530
Smooth Moving, Low Friction, High Rigidity And Long Working Life..
Widely Used For Digital 3D Coordinate Measuring Equipment Such As Precision Equipment Or Special Machinery Industry.
They Are Good Abrasion Resistance, Not Easy To Rust, High Precision And Good Strength..
Suitalbe For Kinds Of Electronic Equipment/Guide Bar, Drive Shaft..
Features
- Due to negligence of our packaging staff, if you receive goods missing parts, please contact us, we can give priority to re-delivery or refund for you.
- Suitalbe for kinds of electronic equipment/guide bar, drive shaft.
- Smooth moving, low friction, high rigidity and long working life.
- they are good abrasion resistance, not easy to rust, high precision and good strength.
- Widely used for digital 3D coordinate measuring equipment such as precision equipment or special machinery industry
- See more on Amazon...
Brand: CNBTR | Manufacturer: yqltd
Weight: 1.98 Pounds
See On Amazon #3
CNBTR Synchronous Synchron Electric Motors 15-18 RPM CW/CCW AC110V 4W with 7mm Shaft Dia
Asin: B01G8USQO2 | Model: CNBTR3526 | PartNumber: CNBTR3526 | Ean: 6930584260191
This Product Is A Metal/Plastic Combination To Ensure That The Gears Work Continuously And Quietly..
Scope Of Application: Mainly Used For The Air Guide Mechanism And Shaking Head Mechanism Of Electric Fans, Heaters, Heaters, Small Sun Angles, Various Display Racks, Handicrafts, Lighting Fixtures And Other Appliances, As Well As The Air Guide Motors And Air Conditioners Of Various Types Of Air Conditioners. Microwave Oven Turntable Motor, Etc..
Low Power Consumption, Low Noise, Small Size, Light Weight And Easy To Use..
[Note] The Applicable Voltage Of This Motor Is Ac110v. If The Voltage Is Too High, The Motor Will Be Burned Out.The Motor Speed Is Not An Accurate Value, And The Speed Will Change With The Change Of Frequency. For Example, The Speed Is 15-18Rpm. At 50Hz, The Speed Is 15Rpm; At 60Hz, The Speed Is 18Rpm..
Features
- [Specifications:] Shaft diameter: 7mm (0.28") Shaft length: 16mm (0.63") Frequency: 50/60Hz
- [Note] The applicable voltage of this motor is AC110V. If the voltage is too high, the motor will be burned out.The motor speed is not an accurate value, and the speed will change with the change of frequency. For example, the speed is 15-18RPM. At 50Hz, the speed is 15RPM; at 60Hz, the speed is 18RPM.
- This product is a metal/plastic combination to ensure that the gears work continuously and quietly.
- Low power consumption, low noise, small size, light weight and easy to use.
- Scope of application: Mainly used for the air guide mechanism and shaking head mechanism of electric fans, heaters, heaters, small sun angles, various display racks, handicrafts, lighting fixtures and other appliances, as well as the air guide motors and air conditioners of various types of air conditioners. Microwave oven turntable motor, etc.
- See more on Amazon...
Brand: CNBTR | Manufacturer: yqltd
Weight: 0.20 Pounds
See On Amazon #4
CNBTR 10pcs Round Non Slip White Rubber Feet Bumpers Pads with Stainless Steel Screws for Furniture Chair Cabinet Electronics, 0.31" x 0.16" (H x Dia)
Asin: B018LPJDIU | Model: / | PartNumber: / | Ean: 0764210488163 | UPC: 764210488163
With High Elasticity, Wear Resistant, Oil Resistant, And Earthquake.
If You Have Any Question About The Product, Feel Free To Contact The Cnbtr Service And We Will Try Our Best To Give You A Satisfactory Answer..
The Hole Is Easy To Installation, And Great To Avoid Your Furniture From Hurt.
Environmental Friendly Material,Comfortable Elegant Appearance.
Features
- Dimensions You Will Get: Rubber Feet Center Hole: 0.16"/4mm, Height: 0.31"/8mm, Width: 0.79"/20mm, Keep your furniture strong and stable, look stylish, give your furniture a brand new look in your in daily life
- Environmental friendly material,comfortable elegant appearance
- With high elasticity, wear resistant, oil resistant, and earthquake
- The hole is easy to installation, and great to avoid your furniture from hurt
- If you have any question about the product, feel free to contact the CNBTR Service and we will try our best to give you a satisfactory answer.
- See more on Amazon...
Brand: CNBTR | Manufacturer: yqltd
Dimensions: 0.31 x 0.79 x 0.59 inches | Weight: 0.07 pounds
See On Amazon #5
CNBTR Multicolor Acrylic 3-30LPM LZQ-7 Oxygen Air Gas Flowmeter with Control Valve for Oxygen Adjustable
Asin: B01D49PA58 | Model: CNBTR51 | PartNumber: CNBTR51 | Ean: 6930584252318
It Can Be Used In Industrial Situations, Oxygen Bar And Hospitals Need To Calculate The Gas Flow.
The Gas Enters And Exits From The Upper Hole Through The Lower Hole, So As To Achieve The Measurement Effect..
Easy To Use And Lasting Performance..
Mainly Used To Detect Oxygen Flow, And Control The Flow Of Oxygen.
Features
- Used to measure single-phase non-pulsating gas flow
- Mainly used to detect oxygen flow, and control the flow of oxygen
- It can be used in industrial situations, oxygen bar and hospitals need to calculate the gas flow
- Easy to use and lasting performance.
- The gas enters and exits from the upper hole through the lower hole, so as to achieve the measurement effect.
- See more on Amazon...
Brand: CNBTR | Manufacturer: yqltd
Weight: 0.22 pounds
See On Amazon #6
CNBTR 4mm Bore Hole Diameter Brass Gear Shaft with 60 T Wheel 0.5 Modulus Set Drive Gear Box Shaft
Asin: B07G5873CP | Model: M6180801080 | PartNumber: M6180801080
Shaft Z1=1, Turn A Round Of Gear T, Can Get A Large Transmission Ratio, Generally In The Power Transmission, The Transmission Ratio I=10-80, Like Big Transmission Ratio, If Use With Gear Transmission, Will Need To Take The Multi-Stage Transmission..
Made Of Brass, Long Time Service..
High Quality Material Selection, Carefully Processing Create High Quality Product..
The Transmission Structure Of Worm Shaft Is Simple, Compact, Small Volume And Light Weight..
Features
- Set include one 0.5 modulus 4MM Hole Dia brass gear shaft and one 60 T brass worm gear wheel.
- The transmission structure of worm shaft is simple, compact, small volume and light weight.
- Shaft Z1=1, turn a round of gear T, can get a large transmission ratio, generally in the power transmission, the transmission ratio I=10-80, like big transmission ratio, if use with gear transmission, will need to take the multi-stage transmission.
- High quality material selection, carefully processing create high quality product.
- Made of brass, long time service.
- See more on Amazon...
Brand: CNBTR | Manufacturer: yqltd
See On Amazon #7
CNBTR 20mm x 20mm White TES1-4902 Semiconductor 6V 2A Tablet Cooling Chip Peltier
Asin: B0747K8FHW | Model: M6170717027 | PartNumber: M6170717027
Easy To Install And Work Without Vibration, Noise.
No Slide Component,Is A Solid Piece.
Packaging Process: Surrounded By Standard 704 Silicone Rubber Seal.
Do Not Need Any Refrigerant, Can Work Continuously, No Pollution Sources,Rotating Parts And Rotary Effect.
Features
- Applicable to a variety small areas where need to cooling
- Do not need any refrigerant, can work continuously, no pollution sources,rotating parts and rotary effect
- Easy to install and work without vibration, noise
- Packaging Process: Surrounded by standard 704 silicone rubber seal
- No slide component,is a solid piece
- See more on Amazon...
Brand: CNBTR | Manufacturer: yqltd
See On Amazon #8
CNBTR 5-6 RPM Turntable Synchronous Electric Motor AC110V CW/CCW TYC-50 with Shaft Set of 10
Asin: B06XW56ZMP | Model: CNBTR4530 | PartNumber: CNBTR4530 | Ean: 6936536859321
Brand: CNBTR | Manufacturer: yqltd
Weight: 2.01 pounds
See On Amazon #9
CNBTR Wood Plug Hole 1/4, 3/8, 1/2, 5/8 inch Silver Woodworking Drill Bit Set Pack of 4
Asin: B01D49Q9LC | Ean: 6930584274365
Features
- [Material] Made of steel material, not easy to wear, and lasting performance. It's a great substitute for your product.
- See more on Amazon...
Brand: CNBTR | Manufacturer: yqltd
See On Amazon #10
CNBTR 5mm CNC Spindle Motor ER16 Type A Extension Rod Collect Chucks Holder and 10pcs Spring Collet CNC Milling Lathe Tool Set for Workholding
Asin: B077PVBCDT
Extension Rod Diameter, And Other Parts Have Been Precision Ground To Eliminate Unbalance And Increase Stability During Cutting..
The Nuts Of Er16 Extension Rod Could Be Tighten Straightly, High Rigidity, Strong Clamping..
Spring Collet Made Of Quality Spring Steel Production, With Good Flexibility And Abrasion Resistance After Heat Treatment.
Er16 Extension Rod Suitable For Extension Of The Tool Holder Cnc Mill, Replace The Drill Clip..
Features
- The nuts of ER16 Extension Rod could be tighten straightly, high rigidity, strong clamping.
- ER16 Extension Rod suitable for extension of the Tool holder CNC Mill, replace the drill clip.
- Extension rod diameter, and other parts have been precision ground to eliminate unbalance and increase stability during cutting.
- Spring Collet made of quality spring steel production, with good flexibility and abrasion resistance after heat treatment
- The nuts of ER16 Extension Rod could be tighten straightly, high rigidity, strong clamping.
- See more on Amazon...
Brand: CNBTR | Manufacturer: yqltd
See On Amazon #11
CNBTR 3.5x2cm M3 Locking Clip Stainless Steel Snap Quick Hook Link Chain Fastener with Threaded Nut Pack of 5
Asin: B01DOULAJ2 | Ean: 6930584259560
Features
- [Material] Made of 304 stainless steel material, not easy to wear, and lasting performance. It's a great substitute for your product.
- See more on Amazon...
Brand: CNBTR | Manufacturer: yqltd
See On Amazon #12
CNBTR Yellow 3MM Hole Dia Brass Gear Shaft + 31MM OD 60 T Brass Gear Wheel 0.5 Modulus Set
Asin: B07G5C2QJ1 | Model: M6180801082 | PartNumber: M6180801082
Features
- Made of brass material, not easy to wear, and lasting performance. This gear wheel & shaft are the excellent industrial replacement accessory.
- See more on Amazon...
Brand: CNBTR | Manufacturer: yqltd
See On Amazon #13
CNBTR Synchronous Electric Motor with Dia 7mm Shaft 5-6 RPM AC110V CW/CCW Set of 5
Asin: B06XWPRLQF | Ean: 6936536859314
Features
- Made from high quality metal and plastic material, and practical, good quality of processing, smooth finish.
- See more on Amazon...
Brand: CNBTR | Manufacturer: yqltd
Weight: 1.00 pounds
See On Amazon #14
CNBTR 20mm Bore 54mm-150mm Outter Dia Aluminum 5 Slot A Type V-Shaped Pulley 5 Step Pulley Belt 12.7mm Belt Width
Asin: B078T55B2X | Model: M6171229470 | PartNumber: M6171229470
Outer Dia: 54Mm ,76Mm ,102Mm ,128Mm , 150Mm..
For Motor Shaft Drive..
Made Of High Quality Aluminum ,Strong And Sturdy..
5 Step Can Be Applied To Different Speed Requirements..
Features
- Suitable for A Type V-Shaped Pulley Timing Belt.
- 5 Step can be applied to different speed requirements.
- Outer dia: 54mm ,76mm ,102mm ,128mm , 150mm.
- Made of high quality Aluminum ,strong and sturdy.
- For Motor shaft drive.
- See more on Amazon...
Brand: CNBTR | Manufacturer: yqltd
See On Amazon #15
CNBTR Motor Extension Rod & 10PCS Milling Lathe Er16 Collet Set for CNC Engraving
Asin: B0CCJFP43X
The Traditional Er Drill Chuck Is Only Locked On The Tool Holder When Installed And Cannot Be Disassembled. When Removing The Nut, The Eccentric Nut Is Removed Together With The Drill Chuck. Our Motor Spindle Extensions Solve This Problem..
Collet Inner Diameters Size From 1Mm, 2Mm, 3Mm To 10Mm, 10 In Total, 1Piece For Each Size..
It Is Used To Extend The Motor Spindle And Can Replace The Drill Chuck. It Can Perfectly Match All Kinds Of Straight Shank Tools When Used With Er Chucks..
Parts Such As The Extended Rod Diameter Are Precision Ground To Avoid Imbalance And Increase The Stability During Handling..
Features
- The nut can be tightened directly, with high rigidity and strong pulling force.
- Parts such as the extended rod diameter are precision ground to avoid imbalance and increase the stability during handling.
- The traditional ER drill chuck is only locked on the tool holder when installed and cannot be disassembled. When removing the nut, the eccentric nut is removed together with the drill chuck. Our motor spindle extensions solve this problem.
- It is used to extend the motor spindle and can replace the drill chuck. It can perfectly match all kinds of straight shank tools when used with ER chucks.
- Collet inner diameters size from 1mm, 2mm, 3mm to 10mm, 10 in total, 1piece for each size.
- See more on Amazon...
Brand: CNBTR | Manufacturer: yqltd
Weight: 0.66 pounds
See On Amazon #16
CNBTR HSS Square End Adjustable Hand Reamer Metal Hole Cutting Tool Adjustment Range 19-21mm Replacing Parts
Asin: B078NZGFBR | Model: M6171225217 | PartNumber: M6171225217
The Adjusted Scope Is 19-21Mm, There May Be Errors, Please Confirm The Size With The Seller Before Buying..
Applicable Materials: A3 Steel, Alloy Steel, Cast Iron, Cast Steel, Aluminum And Other Metal Materials..
For Reaming The Workpiece Has Been Drilling (Or Reaming) After The Hole..
Reamer With One Or More Teeth To Cut Holes In The Surface Of The Thin Metal Layer Of The Rotating Tool. After Reaming The Hole Can Get The Exact Size And Shape..
Features
- Applicable materials: A3 steel, alloy steel, cast iron, cast steel, aluminum and other metal materials.
- Reamer with one or more teeth to cut holes in the surface of the thin metal layer of the rotating tool. After reaming the hole can get the exact size and shape.
- The adjusted scope is 19-21mm, there may be errors, please confirm the size with the seller before buying.
- For reaming the workpiece has been drilling (or reaming) after the hole.
- Applicable materials: A3 steel, alloy steel, cast iron, cast steel, aluminum and other metal materials.
- See more on Amazon...
Brand: CNBTR | Manufacturer: yqltd
See On Amazon #17
CNBTR 10 Pieces Aluminum Profile End Caps 20x40mm European Standard Fasteners Black
Asin: B0D5QLMDCF
Advoid Wear And Tear On Kitchen Or Wooden Floors. For 2040 European Standard Aluminum Profile End Mounting Round Hole 5Mm..
Can Be Used On Chair Tips, Bench Legs, Table Legs, Garden Furniture Inserts, Etc..
Aluminum End Caps Are Recessed, Require No Fasteners, And Can Be Installed On Aluminum To Improve Aesthetics And Safety..
Size: Length: 40Mm/1.57", Width: 20Mm/0.79", Aperture: 2.3Mm/0.09", Hole Spacing: 20Mm/0.79".
Features
- Made of high-quality rubber and plastic, not easily damaged and with beautiful edges.
- Size: Length: 40mm/1.57, Width: 20mm/0.79, Aperture: 2.3mm/0.09, Hole spacing: 20mm/0.79
- Advoid wear and tear on kitchen or wooden floors. For 2040 European standard aluminum profile end mounting round hole 5mm.
- Aluminum end caps are recessed, require no fasteners, and can be installed on aluminum to improve aesthetics and safety.
- Can be used on chair tips, bench legs, table legs, garden furniture inserts, etc.
- See more on Amazon...
Brand: CNBTR | Manufacturer: yqltd
Weight: 0.04 Pounds
See On Amazon #18
CNBTR 2 Pieces Silver Door Hinge 1.18x1.5X 0.18 Inches for Home Office Gate Toolboxes
Asin: B0D5QLKC9Z
The Hinges Are Suitable For Exterior Applications And Can Be Inserted Into Doors And Hatches For Easy Installation..
Can Be Used On Boats, Homes, Yachts, Windows, Lockers, Cabinets, Decks, Doors, Toolboxes, Etc..
The Hinge's Sliding Bearings Allow The Door To Open And Close Easily..
Size: Length: 30Mm/1.18", Width: 38Mm/1.5", Thickness: 4.5Mm/0.18", Hole Spacing: 14X20mm/0.55"X0.79".
Features
- Made of zinc alloy material, it is strong, has good performance and has a long service time.
- Size: Length: 30mm/1.18, Width: 38mm/1.5, Thickness: 4.5mm/0.18, Hole spacing: 14x20mm/0.55x0.79
- The hinges are suitable for exterior applications and can be inserted into doors and hatches for easy installation.
- The hinge's sliding bearings allow the door to open and close easily.
- Can be used on boats, homes, yachts, windows, lockers, cabinets, decks, doors, toolboxes, etc.
- See more on Amazon...
Brand: CNBTR | Manufacturer: yqltd
Weight: 0.11 pounds
See On Amazon #19
CNBTR Multicolor Acrylic 0.5-5LPM LZQ-7 Oxygen Air Gas Flowmeter with Control Valve
Asin: B0D17N8PCP
It Can Be Used In Industrial Situations, Oxygen Bar And Hospitals Need To Calculate The Gas Flow.
Easy To Use And Lasting Performance..
Mainly Used To Detect Oxygen Flow, And Control The Flow Of Oxygen.
Features
- Used to measure single-phase non-pulsating gas flow
- Mainly used to detect oxygen flow, and control the flow of oxygen
- It can be used in industrial situations, oxygen bar and hospitals need to calculate the gas flow
- Easy to use and lasting performance.
- See more on Amazon...
Brand: CNBTR | Manufacturer: yqltd
Weight: 0.22 pounds
See On Amazon
Looking For Something Else?
Search