Side Mount License Plate Bracket, Horizontal Vertical Side Mount License Plate Bracket, Motorcycle Side License Tail Light Relocator(Without Lights)
Asin: B098WY4PX1
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.★ It Can Be Installed Horizontally Or Vertically Depending On Personal Preference..
★ Compatible With Most Custom Applications, Harleys, Metric Bikes And Choppers.
★ Easy Installation, Strong Fixation Function With Adjustable Holes, Just Tighten The Screws And The License Plate Bracket Won't Fall Off..
★ Can Be Used With Or Without The Included Taillight Bracket..
Features
- Made of high quality aluminum alloy, durable, rust and corrosion resistant.
- Can be used with or without the included taillight bracket.
- It can be installed horizontally or vertically depending on personal preference.
- Easy installation, Strong fixation function with adjustable holes, just tighten the screws and the license plate bracket won't fall off.
- Compatible with most custom applications, Harleys, Metric Bikes and Choppers
- See more on Amazon...
Brand: WANLIAN | Manufacturer: WANLIAN
Dimensions: 0.01 x 7.09 x 3.94 inches
See On Amazon Similar To Side Mount License Plate Bracket
#1
Aujen Silicone License Plate Frames,2 Pack Black Side-Opening License Bracket Holder with Easy Installation, License Plate Frame Without Obstruction.Rustproof, Rattle Proof & Weatherproof Universal
Asin: B0BNPV2VTZ | Model: US535 | PartNumber: US535
💡Innovative Side-Opening Design: This License Plate Bracket Features Its Reinforced Corners And Side Opening. With This Special Design, You Just Need To Insert The License Plate From Either Opening Side Of The Frame, Protecting Yourself From Being Hurt And The Surface Of Your Car Being Scratched By The Sharp License Plate..
💎Fashionable Design & Humanized Details: This Silicone License Plate Frame Has 4 Reinforced Round Corners, Looking Great On Your Vehicle While Averting Damages Caused By Traditional Sharp-Cornered Frames. In Addition, Along With The 2 Drain Holes On The Bottom, The Upgraded Vents On The Upper Left Corner And Lower Right Corner Keep Your License Plate Away From Water Accumulation And Rust..
🔨Upgraded Quick-Installation Design: This Item Comes With 8 Screw Caps, 8 Stainless Hex Nuts, 4 Stainless Tapping Screws And 4 Stainless Pan Head Screws. But Screws Are Not Suitable For Tesla. Tesla Owners Need To Purchase Tesla Specific Screws. Simply Slot Your Plate Into The Silicone License Plate Frame And Align The Plate With The Four Holes On The Frame. Screw The License Plate On Your Car With The Hex Nuts First, Screws Second And Screw Caps Finally..
💪High-Quality Silicone Material: The Universal Carbon Fiber License Plate Frame Is Made Of Industrial-Grade Silicone Which Is Characterized As Rustproof, Rattle Proof And Weatherproof, Preventing Your Car From Scratches, Rust, Deformation And Fading In Comparison To Most Metal License Plate Frames..
Features
- NO OBSTRUCTION & STREET LEGAL: This license plate holder perfectly fits any standard size for front and rear license plates (12.30 x 6.30 ) in the US. This black license plate frame will not obscure any information, avoiding unpleasant troubles concerning the frame throughout the drive.
- HIGH-QUALITY SILICONE MATERIAL: The universal carbon fiber license plate frame is made of industrial-grade silicone which is characterized as rustproof, rattle proof and weatherproof, preventing your car from scratches, rust, deformation and fading in comparison to most metal license plate frames.
- INNOVATIVE SIDE-OPENING DESIGN: This license plate bracket features its reinforced corners and side opening. With this special design, you just need to insert the license plate from either opening side of the frame, protecting yourself from being hurt and the surface of your car being scratched by the sharp license plate.
- UPGRADED QUICK-INSTALLATION DESIGN: This item comes with 8 screw caps, 8 stainless hex nuts, 4 stainless tapping screws and 4 stainless pan head screws. But screws are not suitable for Tesla. Tesla owners need to purchase Tesla specific screws. Simply slot your plate into the silicone license plate frame and align the plate with the four holes on the frame. Screw the license plate on your car with the hex nuts first, screws second and screw caps finally.
- FASHIONABLE DESIGN & HUMANIZED DETAILS: This silicone license plate frame has 4 reinforced round corners, looking great on your vehicle while averting damages caused by traditional sharp-cornered frames. In addition, along with the 2 drain holes on the bottom, the upgraded vents on the upper left corner and lower right corner keep your license plate away from water accumulation and rust.
- See more on Amazon...
Brand: AUJEN | Manufacturer: Aujen
Dimensions: 0.01 x 12.30 x 6.30 Inches
See On Amazon #2
LivTee 4 Holes Stainless Steel License Plate Frames, 2 PCS Car Licence Plate Covers, Automotive Exterior Accessories Slim Design with Bolts Washer Caps for US Vehicles, Black
Asin: B08DHVSSG8 | Model: LivTee-PLP-5050-1W | PartNumber: LivTee-PLP-5050-1W | Ean: 0710825808278 | UPC: 710825808278
Installation: The 4-Hole License Plate Frame Is Suitable For Your Car, Truck And All Types Of Trailers. Four (4) Fasteners Are Required To Secure The License Plate And Frame Protector, Which Can Better Protect The License Plate From Deformation. Some Cars Have Only 2 Holes, So Be Sure To Check The Vehicle Before Ordering..
Purchase With Confidence: Any Issues Or Questions Please Feel Free To Contact Us, We Are Always Here To Satisfy All Of You..
Hardware Included: 2 Pcs License Plate Frames, With 12 Screw Caps (Plastic), 12 Machine Screws, 12 Washers (Plastic), 4 Self-Tapping Screws, 1 Screwdriver. Frame Size: 12.3 "X 6.3", Internal Dimensions: 11.4 "X5.3 "..
Stainless Steel Material: The Stainless Steel Is Treated With A 1.2Mm Thick Powder Coating To Provide Long-Term Protection Against Corrosion, Rust, And Aging..
Features
- Product features: Surface painting process, improve texture, simple appearance, fine workmanship, smooth edge polishing without injuring the car and hands.
- Stainless steel material: The stainless steel is treated with a 1.2mm thick powder coating to provide long-term protection against corrosion, rust, and aging.
- Installation: The 4-hole license plate frame is suitable for your car, truck and all types of trailers. Four (4) fasteners are required to secure the license plate and frame protector, which can better protect the license plate from deformation. Some cars have only 2 holes, so be sure to check the vehicle before ordering.
- Hardware included: 2 pcs License plate frames, with 12 Screw Caps (plastic), 12 Machine Screws, 12 Washers (plastic), 4 Self-tapping Screws, 1 Screwdriver. Frame size: 12.3 x 6.3, internal dimensions: 11.4 x5.3 .
- Purchase with Confidence: Any issues or questions please feel free to contact us, we are always here to satisfy all of you.
- See more on Amazon...
Brand: LivTee | Manufacturer: LivTee
Dimensions: 0.04 x 6.30 x 12.30 inches
See On Amazon #3
BGGTMO License Plate Bracket Holder- Front License Plate Mounting Kit, Universal Bumper Car Tag Frame Mount Adapter with Stainless Steel Screw Cap, Cable Ties
Asin: B0B9XY1FBR | Model: TL-License Plate Frame | PartNumber: TL-License Plate Frame
Easy To Install - Our Front Tag Brackets Have A Unique Design - 4 Copper Nuts With Neat Threads That Hold The Bolts Tightly And Hold The License Plate On The Bracket. The Kit Includes License Plate Mounting Hardware: Stainless Steel License Plate Screws, Black Screw Caps , Stainless Steel Cable Ties..
Warranty - If You're Unsatisfied With The License Plate Mount Kit For Any Reason Or The Screws Don't Fit Your Model, Feel Free To Contact Us And We'll Fix It - Refund Or Send A Replacement..
Universal Front Plate Holder- Designed To Fit All Standard 6X12 Inch Novelty/License Plates. The Black License Plate Holder Is Suitable For All Vehicles With Contoured Bumper. The Multiple Mounting Holes Can Be Used As A Good License Plate Adapter To Install 4 Holes Or 2 Holes Or Non-Standard License Plates..
Firm License Plate Tag Holder - This Front License Plate Bracket Is Made Of Black Abs Plastic Which Resists Corrosion And Rust. The Metal License Plate Does Not Directly Contact The Car Paint, Avoid Scratches And Noise, Protect The License Plate Rustproof And Rattle Proof..
Features
- For Front License Plate Mount- If you have 2 pre-drilled holes in your front bumper, no matter if the hole spacing or position is in line with standard license plate, you can use our front license plate adapter for license plate mount, if your car bumper has no hole, you can use our stainless steel cable ties to mount on the grille
- Firm License Plate Tag Holder - This front license plate bracket is made of black ABS plastic which resists corrosion and rust. The metal license plate does not directly contact the car paint, avoid scratches and noise, protect the license plate rustproof and rattle proof.
- Easy To Install - Our front tag brackets have a unique design - 4 copper nuts with neat threads that hold the bolts tightly and hold the license plate on the bracket. The kit includes license plate mounting hardware: stainless steel license plate screws, black screw caps , stainless steel cable ties.
- Universal Front Plate Holder- Designed to fit all standard 6x12 inch novelty/license plates. The black license plate holder is suitable for all vehicles with contoured bumper. The multiple mounting holes can be used as a good license plate adapter to install 4 holes or 2 holes or non-standard license plates.
- Warranty - If you're unsatisfied with the license plate mount kit for any reason or the screws don't fit your model, feel free to contact us and we'll fix it - refund or send a replacement.
- See more on Amazon...
Brand: BGGTMO | Manufacturer: TANGGIFT
Dimensions: 0.04 x 6.00 x 12.00 inches
See On Amazon #4
Black License Plate Screws Kit - Set of 8 Fasteners For Front and Back License Plates and License Plate Frames or Covers on Domestic Cars, Trucks, SUVs - Rustproof, Self Tapping Mounting Bolts (Black)
Asin: B0769MFR7L | Ean: 0637122859355, 0637122859829 | UPC: 637122859355, 637122859829
Rustproof Hardware: We Use Rustproof High-Grade Steel Precision-Made Screws To Make Sure You Never Have To Deal With Unsightly Rusty Screws And Rust Lines On Your License Plates And Frames. And You’Ll Never Have To Worry About These Bolts Rusting In Place..
Hassle-Free: We're An American Based Company Dedicated To Making Hardware For Your Vehicle That Lasts. If For Any Reason These Aren't The Right License Plate Screws For You, We Will Make It Right..
Easy Installation: We Designed These License Plate Mounting Screws To Be Durable And Easy To Install On Front Or Back License Plates. Simple Screwdriver Installation Makes This Set Of Screws Easy To Use For Car Enthusiasts And Casual Car Owners Alike. No Special Tools Required..
Better Compatibility: Our License Plate Bolts Work With Any Vehicle That Uses A Plastic Or Nylon Receiver Or Retainer. This License Plate Screw Kit Won't Work With Metal Threaded Holes, But Fits Most Cars, Trucks, Suvs, Vans, Rvs, And Motorcycles Including Chrysler, Dodge, Jeep, Ford, Gmc, Cadillac, Buick, And Chevrolet Vehicles..
Features
- BLACK LICENSE PLATE SCREW KIT: This set of fasteners includes 8 black license plate screws with a slotted hex-head and 1/4 inch (.25") diameter and 3/4 inch (.75") long self tapping shank. They are the perfect set of screws for the front or back license plate and frames of most domestic vehicles.
- BETTER COMPATIBILITY: Our license plate bolts work with any vehicle that uses a plastic or nylon receiver or retainer. This license plate screw kit won't work with metal threaded holes, but fits most cars, trucks, SUVs, vans, RVs, and motorcycles including Chrysler, Dodge, Jeep, Ford, GMC, Cadillac, Buick, and Chevrolet vehicles.
- RUSTPROOF HARDWARE: We use rustproof high-grade steel precision-made screws to make sure you never have to deal with unsightly rusty screws and rust lines on your license plates and frames. And you ll never have to worry about these bolts rusting in place.
- EASY INSTALLATION: We designed these license plate mounting screws to be durable and easy to install on front or back license plates. Simple screwdriver installation makes this set of screws easy to use for car enthusiasts and casual car owners alike. No special tools required.
- HASSLE-FREE: We're an American based company dedicated to making hardware for your vehicle that lasts. If for any reason these aren't the right license plate screws for you, we will make it right.
- See more on Amazon...
Brand: OttoSpeed | Manufacturer: Revolution Car Badges
Weight: 0.02 Pounds
See On Amazon #5
eRapta ERT01 HD Backup Camera Rear View License Plate Reverse Camera Universal for Pickup Truck Car SUV 149 Perfect Angle Night Vision IP69K Level Waterproof
Asin: B074KZSVD6 | Model: ERT01 | PartNumber: ERT01
Easy To Install: Suit For 12-24V Dc Power. Just Need To Connect Camera's Power To Reversing Light, Then Connect The Camera To Your Radio, Screen Or Monitor By 26Ft Av Cable. Complete Accessories And Easy Installation Save Our Time..
149 °Wide View:Camera System With Up And Down Adjustable Angle And 149 ° Viewing Angle Of The Reversing Camera Design, Show The True Dimension Of The Site To Avoid Blind Spots Make Parking Safer And Simpler..
What You Get: 1X Backup Camera, 2X Metal Brackets, 1X Av Cable ,1X Power Cable ,1X Installation Manual, Two Year Warranty And Lifetime Technical Support. Erapta Support Department Will Always Be There For Any Consultation..
Double Bracket: Comes With Two Brackets, Installed Perfectly Behind The License Plate By Hidden Metal Bracket. Additional Mounting Brackets Are Also Provided For Mounting On License Plates, Car Trunks, Sides, Mirrors Etc. Supports Flexible & Easy Installation..
Ip69k Waterproof: The Camera Is Made Of Hard Metal Housing High-Density Impermeable Material With Efficient Dustproof, Shockproof And Waterproof Performance To Ensure The Camera Lasts For A Long Time..
Crystal Clear Image & Nice Night Vision: 6 Glass Lenses, 100% True Color Reproduction, The Latest Upgraded Chip, Generate Clear Real-Time Video. 10 Led Lights Automatically Fill The Light When Powered, Get A Great Color Image In The Dark For Safe Reversing And Driving..
Universal Rear View Camera: Suit For 12-24V Dc Power, 26Ft Rca Video Cable. Support Connectivity With Radios, Dvd Players, Oem Navigators, Or Any Display With Rca Video Inputs..
Features
- Excellent License Plate Wired Backup Camera: Designed for car,Pickup Truck,SUV,Minivan and Sedans. Work well on old cars,new cars or used cars.
- Universal Rear View Camera: Suit for 12-24V DC Power, 26ft RCA video cable. Support connectivity with radios, DVD players, OEM navigators, or any display with RCA video inputs.
- Easy to Install: Suit for 12-24V DC Power. Just need to connect camera's power to reversing light, then connect the camera to your radio, screen or monitor by 26ft AV cable. Complete accessories and easy installation save our time.
- Crystal Clear Image & Nice Night Vision: 6 glass lenses, 100% true color reproduction, the latest upgraded chip, generate clear real-time video. 10 LED lights automatically fill the light when powered, get a great color image in the dark for safe reversing and driving.
- Double Bracket: Comes with two brackets, installed perfectly behind the license plate by hidden metal bracket. Additional mounting brackets are also provided for mounting on license plates, car trunks, sides, mirrors etc. Supports flexible & easy installation.
- IP69K Waterproof: The camera is made of hard metal housing high-density impermeable material with efficient dustproof, shockproof and waterproof performance to ensure the camera lasts for a long time.
- 149 Wide View:Camera system with up and down adjustable angle and 149 viewing angle of the reversing camera design, show the true dimension of the site to avoid blind spots make parking safer and simpler.
- What You Get: 1x Backup Camera, 2x Metal Brackets, 1x AV Cable ,1x Power Cable ,1x Installation Manual, Two Year Warranty and Lifetime Technical Support. eRapta support department will always be there for any consultation.
- See more on Amazon...
Brand: eRapta | Manufacturer: eRapta
Dimensions: 1.30 x 9.40 x 1.00 Inches | Weight: 0.18 pounds
Warranty: 2 yeas warranty
See On Amazon #6
BGGTMO Black American Flag License Plate Frames- 2 Pack Front Rear Patriotic USA Stars and Stripes Aluminum Car Tag Holder Cover with Screws
Asin: B09JVG4Y8B | Ean: 0745437925990 | UPC: 745437925990
Easy To Install: License Plate Mounting Hardware Is Included: License Plate Screws And Nylon Inserts. M6*20Mm (1/4X3/4 Inch) Long Bolts Are Suitable For Fastening The License Plates Of Most Models. The 4 Hole Car Tag Frame With Matte Black License Plate Screw Caps, Always Protect Your Car Tag Clean And Tidy.
Buy With Confidence: Our Usa Flag License Plate Frame Is Available With A 1-Year Manufacturer's After-Sales Service. If You Are Not Satisfied With Our Products, Or The Screw Size Does Not Fit Your Car License Plate, Please Feel Free To Contact Us, We Can Provide You With A Refund Or Send Replacement Screws For Free..
Gift: The 2 Pack Blue Line Car Decals Are Made From 3M Vinyl, 2.5" X 4.5". Black Flag Tire Valve Caps Are Made From Aluminum Alloy, 10*16Mm, Can Be Installed On Many Tires Or Wheel Air Valve Stems. Personalized American Flag Car Accessories Are Great Gifts For Police Law Enforcement Army Veterans Military Or Anyone Who Loves The United States.
Slim Frame For Universal Car Tag: The Frame Is Designed According To The 12*6 Inch Us Standard License Plate. The 4 Thin Edges Will Not Block The Registration Sticker On The 4 Corners Of The Metal License Plate, Which Is Legal Street In Most States . The Black Foam License Plate Pad Is Pasted On The Back Of The Plate To Reduce Noise And Avoid Scratches And Protect The License Plate From Rattle Proof.
Features
- Patriotic USA Flag License Plate Holder: The rustproof frame is made of 4mm thick brushed aluminum-plastic composite panel, front and back double-sided aluminum, clear texture, heavy-duty, will not rust or corrode. The National flag emblem is screen printed , UV-proof and waterproof, no need to worry about fading or aging.
- Slim Frame For Universal Car Tag: The frame is designed according to the 12*6 inch US standard license plate. The 4 thin edges will not block the registration sticker on the 4 corners of the metal license plate, which is legal street in most states . The black foam license plate pad is pasted on the back of the plate to reduce noise and avoid scratches and protect the license plate from rattle proof
- Easy To Install: License plate mounting hardware is included: license plate screws and nylon inserts. M6*20mm (1/4X3/4 inch) long bolts are suitable for fastening the license plates of most models. The 4 hole car tag frame with matte black license plate screw caps, always protect your car tag clean and tidy
- Gift: The 2 pack blue line car decals are made from 3M Vinyl, 2.5 X 4.5. Black flag tire valve caps are made from aluminum alloy, 10*16mm, can be installed on many tires or wheel air valve stems. Personalized American flag car accessories are great gifts for police law enforcement army veterans military or anyone who loves the United States
- Buy With Confidence: Our USA flag license plate frame is available with a 1-year manufacturer's after-sales service. If you are not satisfied with our products, or the screw size does not fit your car license plate, please feel free to contact us, we can provide you with a refund or send replacement screws for free.
- See more on Amazon...
Brand: BGGTMO | Manufacturer: YoUoY
Dimensions: 0.30 x 12.00 x 6.00 inches
See On Amazon #7
True MODS Black LED License Plate Light for Boat Trailer [Steel Bracket Mount] [DOT FMVSS 108] [SAE L] 12V DC Waterproof Universal Submersible Tag Lamp for Car Work Utility Flat Bed Box Semi Truck RV
Asin: B07937BQYJ | Model: CAZLEDSIL0131-BK | PartNumber: CAZLEDSIL0131-BK | Ean: 0816165025594 | UPC: 816165025594
Waterproof - With An Ipx7 Waterproof Certification, This Kit Is Well Protected From Rainfall Or A Dip In A Puddle Thus Enhancing Its Functionality And Durability..
Safely Protected By Law - With A Dot Fmvss-108 Certification, This License Plate Kit Enhances Your Visibility And Ensures That You Conform To The Set Laws..
Versatile - Being Waterproof Doesn't Only Add To This Led Kit's Durability, But Also Its Functionality, Making It Suitable For Various Purposes Including Marine Applications..
Hassle Free Installation - In Addition To The Ready To Mount Stainless Steel Bracket, The Kit Comes Will All The Accessories Required For Installation Thus Making Sure That The Installation Experience Is As Pleasant As Possible..
Features
- IMPECCABLE BUILD QUALITY - Made from high-quality components which are designed to withstand damage and brave all harsh climatic conditions.
- HASSLE FREE INSTALLATION - In addition to the ready to mount stainless steel bracket, the kit comes will all the accessories required for installation thus making sure that the installation experience is as pleasant as possible.
- WATERPROOF - With an IPX7 waterproof certification, this kit is well protected from rainfall or a dip in a puddle thus enhancing its functionality and durability.
- VERSATILE - Being waterproof doesn't only add to this LED kit's durability, but also its functionality, making it suitable for various purposes including marine applications.
- SAFELY PROTECTED BY LAW - With a DOT FMVSS-108 Certification, this license plate kit enhances your visibility and ensures that you conform to the set laws.
- See more on Amazon...
Brand: ONLINE LED STORE | Manufacturer: ONLINE LED STORE
Dimensions: 2.50 x 8.50 x 3.00 inches | Weight: 0.31 Pounds
See On Amazon #8
License Plate Frames - 2 PCS Silicone License Plate Holder for US Car Universal License Plate Bracket, Rustproof, Rattle Proof & Weatherproof, Mounting Accessories Included
Asin: B0989SKVZL | Ean: 0600358139584 | UPC: 600358139584
Easy Installation For A Secure Fit: This Item Comes With 2 License Plate Frame, 8 Screw Caps, 8 Cup Washers, 8 Stainless Screws And 1 Screwdriver. Simply Put Your Plate Into The Silicone License Plate Frame And Align The Plate With The Four Holes On The Frame, Then Screw The License Plate On Your Car With The Screws Set..
Guaranteed: Topodo Is Proud To Have You As Our Customer. If Your Purchase Is Unsatisfactory In Any Way, You Are Covered With Our Fast Free Replacement And Money Back Guarantee! Feel Free To Contact Us!.
Humanized Design: Our Automotive License Plate Frames Have 8 Drainage Holes To Release Water. And Allow Rain, Ice, And Snow To Easily Seep Out, Ensuring Your Plates Stay Rust And Tarnish Free..
For U.S. License Plate: With 0 License Plate & Sticker Obstruction, The License Plate Frames No Obstruction & Street Legal. No More Worrying About Being Stopped By The Police..
Features
- Silicone Car Accessories: The universal license plate frame is made of HIGH-QUALITY SILICONE MATERIAL, which protect license plate from rusting and damaging and is more durable than plastic frame. These lisences plate frame will not rust even if it is exposed all year round to wind and rain.
- For U.S. License plate: With 0 license plate & sticker obstruction, the license plate frames NO OBSTRUCTION & STREET LEGAL. No more worrying about being stopped by the police.
- Easy Installation For a Secure Fit: This item comes with 2 license plate frame, 8 screw caps, 8 cup washers, 8 stainless screws and 1 Screwdriver. Simply put your plate into the silicone license plate frame and align the plate with the four holes on the frame, then screw the license plate on your car with the screws set.
- Humanized design: Our automotive license plate frames have 8 drainage holes to release water. And allow rain, ice, and snow to easily seep out, ensuring your plates stay rust and tarnish free.
- GUARANTEED: TOPODO is Proud to Have You as Our Customer. If Your Purchase is Unsatisfactory in Any Way, You are Covered with Our FAST Free Replacement and MONEY BACK Guarantee! Feel Free to Contact Us!
- See more on Amazon...
Brand: TDHDIKE | Manufacturer: TOPODO
See On Amazon #9
ELSKER&HOME 8.5x11 Certificate Frame - Classic Black Color Frame - Displays Diploma 8.5x11 Inch with Mat - 11x14 Inch Without Mat - For Document/Photo(Double Mat - Matte Black with Gold Rim)
Asin: B0876YVW4M
Features: Picture Frame Has Sturdy Performance. With No Fragile Glass, It Is A Highly Transparent Polymer Plate, Making It Safer And More Transparent Than Glass And No Easy To Be Fragile So That It Will Not Cause Potential Damage To Your Body And Certificates..
How To Use： There Is A Rotary Button On The Back, Which Is Easy To Open And Close. A 45-Degree Bracket On The Back Panel Allows You To Place It Horizontally Or Vertically On The Desk. Two Hooks On The Frame Allow You To Hang It On The Wall Horizontally Or Vertically. Hd Acrylic Plate:Please Carefully Remove The Protective Film..
Package：Firm Packaging Can Protect The Document Frame Safely. Outside Packaging Is Designed As A Gift Package With Black Letters On Apricot Background. The Whole Product Can Be A Nice Gift To Yourself, Your Friends And Families..
Material：With A Smooth Black Frame Finish And Thick Highly Transparent Polymer Plate.Making It Safer And More Transparent Than Glass And No Easy To Be Fragile So That It Will Not Cause Potential Damage To Your Body And Certificates..
Features
- Scope of application: This product is suitable for 8.5x11 inch files with mat or 11x14 inch files without mat.Classic matte black frame, which can be used in office, living room, bedroom to display your certificates, diplomas, files,degrees, photos and images.
- Material With a smooth black frame finish and thick highly transparent polymer plate.making it safer and more transparent than glass and no easy to be fragile so that it will not cause potential damage to your body and certificates.
- Features: Picture frame has Sturdy performance. With no fragile glass, it is a highly transparent polymer plate, making it safer and more transparent than glass and no easy to be fragile so that it will not cause potential damage to your body and certificates.
- Package Firm packaging can protect the document frame safely. Outside packaging is designed as a gift package with black letters on apricot background. The whole product can be a nice gift to yourself, your friends and families.
- How to use There is a rotary button on the back, which is easy to open and close. A 45-degree bracket on the back panel allows you to place it horizontally or vertically on the desk. Two hooks on the frame allow you to hang it on the wall horizontally or vertically. HD ACRYLIC PLATE:PLEASE CAREFULLY REMOVE THE PROTECTIVE FILM.
- See more on Amazon...
Brand: ELSKER&HOME
Dimensions: 3.20 x 40.50 x 32.50 inches | Weight: 1.00 pounds
See On Amazon #10
LINKITOM Submersible LED Trailer Light Kit, Super Bright Brake Stop Turn Tail License Lights for Camper Truck RV Boat Snowmobile Under 80" Inch
Asin: B07H3KWK1Y | Ean: 0608631396877 | UPC: 608631396877
Compliant With Dot Standards: The Lamp Shade Of Utility Trailer Light Kit With A New Abs Material, Compliant With Dot Standards.
Widely Used : Widely Applicable To 80 Inch Width Tractor, Such As Truck, Trailer, Boat, Bus, Lorry, Van, Caravan, Snowmobile, Etc. Please Make Sure Wires Connect Correctly And No Electronic Short Before Underwater..
25Ft Wiring Harness Have Superior Quality Guaranteed Than The Traditional Copper Coated Aluminum Wires And Split Y-Style Color Coded Harness. Fully Operable In Inclement Weather, These Trailer Lights Are Tough And Used For The Long Term..
Ip68 Waterproof And Submersible: There Is No Screw On The Lamp Shade , The Led Trailer Lights Are Completely Welded Together, The Circuit Board Of Tail Light Is Seal. This Is To Guarantee That Water Will Not Damage The Diodes Or Circuit Board. Excellent Tightness Makes It Be Definitely Waterproof And Submersible..
Features
- Trailer Light Kit : Led boat trailer light kits has everything you need,includes two stop turn signals LED marker lights, two amber clearance lights, one 22 feet and one 4 feet wiring harness, license plate bracket, 4pcs complimentary reflective sticker.
- IP68 Waterproof and Submersible: There is no screw on the lamp shade , the LED trailer lights are completely welded together, The circuit board of tail light is seal. This is to guarantee that water will not damage the diodes or circuit board. excellent tightness makes it be definitely waterproof and submersible.
- Compliant with DOT standards: The lamp shade of utility trailer light kit with a new ABS material, compliant with DOT standards
- 25ft wiring harness have superior quality guaranteed than the traditional copper coated aluminum wires and split Y-style color coded harness. Fully operable in inclement weather, these trailer lights are tough and used for the long term.
- Widely Used : Widely applicable to 80 Inch width tractor, such as truck, trailer, boat, bus, lorry, van, caravan, snowmobile, etc. Please make sure wires connect correctly and no electronic short before underwater.
- See more on Amazon...
Brand: LINKITOM | Manufacturer: Linkitom
Weight: 1.00 pounds
See On Amazon #11
Intermerge License Plate Frames, 2 Pack, Universal US Car Black TPU Bracket Holder. Rust-Proof, Rattle-Proof, Weather-Proof with Drainage Holes Car Accessories
Asin: B07VT4CZQY | Model: L-21 | PartNumber: L-21 | Ean: 0769135054318 | UPC: 769135054318
Brand: Intermerge | Manufacturer: Intermerge
Dimensions: 0.30 x 12.00 x 6.00 Inches | Weight: 0.35 pounds
See On Amazon #12
RED WOLF Front License Plate Bracket Holder Frame Tag Universal for Car Truck Van SUV with 6 Screws and Wrench Kit Black Easy Mount
Asin: B09J4SWFQ8 | Ean: 6926585400896
Durability Construction. It’S Made Of Premium Abs Plastic Quality Which Is Heavy-Duty & Protected By Uv Stabilizers To Prevent Discoloration. Without Fading Or Cracking. Anti-Rust, Anti-Scratch, Water-Proof And Anti-Rattle..
Red Wolf Front Bumper License Plate Bracket Makes Your License Plate Look More Advanced. Simple And Fashion Design Improve Your Car’S Level Greatly..
Perfect Fit Standard. The License Plate Frame Cover Is A Standard Size 12X6x0.8 Inch. That License Plate Bracket Is Suitable For Usa And Canada. No License Plate Obstruction. No Sticker Obstruction..
Easy To Install. The Screws And And Bolts Are Provided To Mount A Plate Securely. No Special Tools Or Equipment Required!.
Features
- This license plate bracket directly flat mount on front bumper 6" x 12" Universal Fit Auto Car Truck Van SUV. **NOTE** suitable for bumpers with radians
- Easy to install. The screws and and bolts are provided to mount a plate securely. No special tools or equipment required!
- Durability construction. It s made of premium ABS plastic quality which is heavy-duty & protected by UV stabilizers to prevent discoloration. Without fading or cracking. Anti-rust, anti-scratch, water-proof and anti-rattle.
- Perfect fit standard. The license plate frame cover is a standard size 12x6x0.8 inch. That license plate bracket is suitable for USA and Canada. No license plate obstruction. NO sticker obstruction.
- RED WOLF front bumper license plate bracket makes your license plate look more advanced. Simple and fashion design improve your car s level greatly.
- See more on Amazon...
Brand: RED WOLF | Manufacturer: RED WOLF
Dimensions: 0.79 x 11.81 x 5.91 inches
See On Amazon #13
Dash Cam Front and Rear, Mini Dash Cam 1080P Full HD with 32GB SD Card, 2.45 inch IPS Screen, 2 Mounting Ways, Night Vision, WDR, Accident Lock, Loop Recording, Parking Monitor
Asin: B0B7QX8GLC | Ean: 0616612765475 | UPC: 616612765475
🎁【Loop Recording & Accident Lock】 - The Loop Recording Function Makes The Newly Recorded Video Will Overwrite The Oldest Video When Sd Card Is Full. Built-In G-Sensor, The Video Will Be Automatically Locked And Retained Without Being Overwritten When The Car Is Hit. Or You Can, By Pressing The Lock Button, Keep The Video You Want..
🎁【Easy Installation & All In One Design】- After Collecting All The Accessories For Installing The Dashcam, We Have Added A Crowbar And Cable Clips To Help You Install The Dash Cam Better And Faster, And Even A Novice Can Easily Set Up And Install. In Addition To The Basic Functions, The Dash Cam Has More Features Like Voice Recording, Photo Function And So On..
📧【Lifetime Technical Support & Reliable Customer Care】- We Offer Lifetime Technical Support Including Professional After-Sales Team Who Respond 24/7 Online, Replacement Parts Or 30 Days Full Refund. If There Is Any Problem Or Suggestions With The Dash Cam Front And Rear, Please Feel Free To Contact With Us. We Will Always Be Here For You..
🎁【Super Night Vision & Parking Monitor】- The Wdr Function Automatically Adjusts The Brightness Of The Light. Weakens The Strong Light And Improves The Low Light. The Dash Cam Can Clearly Capture The Road Conditions In The Night. If The Parking Monitor Function Is Turned On And The Car Is Hit Or Scratched, The Dash Cam Will Automatically Sense And Record A Short Video..
🎁【32Gb Card Included & Two Mounting Ways】 - In Order To Allow You To Use The Dash Cam More Quickly, We Provide A 32Gb Sd Card, You Do Not Need To Buy This Card Additionally. It Is Plug And Play, Very Convenient. Two Kinds Of Brackets Are Included. The Suction Cup Allows Flexible Placement Of The Dash Cam, While The 3M Bracket Stabilises The Position Of The Dash Cam..
Features
- MINI DASH CAM FRONT AND REAR - This mini and compact dash cam won't obscure your view. It comes with a 170 wide-angle 1080P front camera and a 720P HD waterproof rear camera that captures all three lanes of the road. Meanwhile, the IPS display and WDR function make video recording more vivid, colorful and clear.
- 32GB CARD INCLUDED & TWO MOUNTING WAYS - In order to allow you to use the dash cam more quickly, we provide a 32gb SD card, you do not need to buy this card additionally. It is plug and play, very convenient. Two kinds of brackets are included. The suction cup allows flexible placement of the dash cam, while the 3M bracket stabilises the position of the dash cam.
- LOOP RECORDING & ACCIDENT LOCK - The loop recording function makes the newly recorded video will overwrite the oldest video when sd card is full. Built-in G-Sensor, the video will be automatically locked and retained without being overwritten when the car is hit. Or you can, by pressing the lock button, keep the video you want.
- SUPER NIGHT VISION & PARKING MONITOR - The WDR function automatically adjusts the brightness of the light. Weakens the strong light and improves the low light. The dash cam can clearly capture the road conditions in the night. If the parking monitor function is turned on and the car is hit or scratched, the dash cam will automatically sense and record a short video.
- EASY INSTALLATION & ALL IN ONE DESIGN - After collecting all the accessories for installing the dashcam, we have added a crowbar and cable clips to help you install the dash cam better and faster, and even a novice can easily set up and install. In addition to the basic functions, the dash cam has more features like Voice Recording, Photo Function and so on.
- LIFETIME TECHNICAL SUPPORT & RELIABLE CUSTOMER CARE - We offer LIFETIME Technical Support including professional after-sales team who respond 24/7 online, replacement parts or 30 days full refund. If there is any problem or suggestions with the dash cam front and rear, please feel free to contact with us. We will always be here for you.
- See more on Amazon...
Brand: Rvntop | Manufacturer: DKK
Dimensions: 1.77 x 1.29 x 2.67 inches | Weight: 0.89 pounds
See On Amazon #14
XCLPF Front License Plate Bracket. no Drill Front License Plate Bracket .Front License Plate mounting kit. Universal Bumper Car Frame Mount Adapter with Stainless Steel Screw Cap,Cable Ties
Asin: B0CCS9KT3B
Easy To Install:No Drill Front License Plate Bracket. This Can Be Done In Just A Few Minutes Without Any Professional Tools. Even If You Are Not Good At Diy, You Can Easily Install It..
Fits Most Car Models: This Front License Plate Fits All Standard 6X12-Inch License Plates, Whether You Have A Sedan, Suv Or Truck, And Regardless Of Whether You Have Two Pre-Drilled Holes In Your Front Bumper.You Can Use This Holder Because We Offer Stainless Steel Zip Ties..
Secure To The Road: Xclpf Front License Plate Mounting Kit Is Made Of High-Strength Material And Has Been Rigorously Tested To Ensure It Does Not Loosen While Driving, Providing Security For Your Driving Safety..
Beautiful To Look At: This License Plate Bracket Is Simple And Generous In Appearance, With Abs Black Plastic Materials That Blend Perfectly With The Body. Not Only Does It Not Detract From The Beauty Of The Vehicle, It Also Adds A Sense Of Style To Your Car..
Features
- Durable: XCLPF black front license plate bracket from high quality materials and features water resistance, dust resistance and rust resistance. It can withstand all kinds of harsh weather conditions and is not easily damaged even with long-term use.
- Beautiful to look at: This license plate bracket is simple and generous in appearance, with ABS black plastic materials that blend perfectly with the body. Not only does it not detract from the beauty of the vehicle, it also adds a sense of style to your car.
- Easy to install:no drill front license plate bracket. This can be done in just a few minutes without any professional tools. Even if you are not good at DIY, you can easily install it.
- Secure to the Road: XCLPF front license plate mounting kit is made of high-strength material and has been rigorously tested to ensure it does not loosen while driving, providing security for your driving safety.
- Fits most car models: This front license plate fits all standard 6x12-inch license plates, whether you have a sedan, SUV or truck, and regardless of whether you have two pre-drilled holes in your front bumper.You can use this holder because we offer stainless steel zip ties.
- See more on Amazon...
Brand: XCLPF | Manufacturer: XCLPF
See On Amazon #15
Aootf Front License Plate Bracket Holder - Universal Front Bumper License Plate Mounting Kit, 2 Drill Holes Car Tag Adapter with Anti Theft Stainless Steel Screw Bolt Caps
Asin: B0C7TL7C4L
Easy To Install- Our Front Tag Bracket Screw Holes Come With Thread - 4 Copper Nuts With Neat Threads That Hold The License Plate On The Bracket Tightly. The Kit Includes License Plate Mounting Hardware: Stainless Steel License Plate Screws, Black Screw Caps , Stainless Steel Cable Ties..
Guarantee- Our Bumper License Plate Holder Provides 1 Years Warranty, Any Questions, Please Feel Free To Contact Us, We Will Actively Solve..
License Plate Anti-Theft - The Front Plate Holder Kit Is Available In 3 Types And Sizes Of Stainless Steel License Plate Screws: M6*20Mm Self-Tapping Or Mechanical Screws Secure The Plate Bracket To The Bumper, And M6*12Mm Mechanical Bolts Secure The Car Tag Plate To The Bracket. The Anti-Theft License Plate Screws With The Hexagonal Plum Button-Head Can Protect The Security Of The License Plate.
Universal License Plate Adapter - This Front License Plate Holder Is Made Of Black Abs Plastic Which Resists Corrosion And Rust. The Metal License Plate Does Not Directly Contact The Car Paint, Avoid Scratches And Noise, Protect The License Plate Rustproof And Rattle Proof.
Features
- Front License Plate Mounting Kit- If you need to mount a front license plate and your car's bumper has no pre-drilled holes or only 2 holes, you can choose our front license plate mount kit. You can use stainless steel license plate screws to lock the bracket to the pre-drilled front bumper, or use stainless steel cable ties to attach the bracket to the radiator grille, No need to destroy your existing bumper
- Universal license plate Adapter - This front license plate holder is made of black ABS plastic which resists corrosion and rust. The metal license plate does not directly contact the car paint, avoid scratches and noise, protect the license plate rustproof and rattle proof
- Easy To Install- Our front tag bracket Screw holes come with thread - 4 copper nuts with neat threads that hold the license plate on the bracket tightly. The kit includes license plate mounting hardware: stainless steel license plate screws, black screw caps , stainless steel cable ties.
- License plate Anti-Theft - The front plate holder kit is available in 3 types and sizes of stainless steel license plate screws: M6*20mm self-tapping or mechanical screws secure the plate bracket to the bumper, and M6*12mm mechanical bolts secure the car tag plate to the bracket. The anti-theft license plate screws with the Hexagonal plum button-head can protect the security of the license plate
- Guarantee- Our Bumper License Plate Holder provides 1 years warranty, any questions, please feel free to contact us, we will actively solve.
- See more on Amazon...
Brand: AOOTF | Manufacturer: Aootf
Dimensions: 0.30 x 12.00 x 6.00 inches
Warranty: 1 year
See On Amazon #16
MAXXHAUL 70094 12V Trailer Light Kit (for Trailers Under 80")
Asin: B01C4ZBXFY | Model: 70094 | PartNumber: 70094 | Ean: 0817399010943 | UPC: 817399010943
25-Feet Split Y-Style Harness And 4-Feet 4-Pole Color Coded Copper Wires.
Large 4.5-Inch X 5-Inch Lenses And Includes License Plate Light And Bracket.
Kit Includes Stop, Tail, Turn Signal Lights, Two Amber Clearance Lights And Wiring Harness.
Features
- Trailer light kit for under 80-inch
- Kit includes stop, tail, turn signal lights, two amber clearance lights and wiring harness
- 25-Feet split y-style harness and 4-feet 4-pole color coded copper wires
- Large 4.5-inch X 5-inch lenses and includes license plate light and bracket
- See more on Amazon...
First Available: 09/17/2016
Brand: MAXXHAUL | Manufacturer: MaxxHaul
Weight: 2.00 Pounds
Warranty: 90 days
See On Amazon #17
FBJTDQ Trailer License Plate Bracket Frame- Aluminum Heavy-Duty Bracket Holder for Trucks, Trailers, RVs, Boats, 1 Pack Universal License Plates with Mounting Screws, Caps
Asin: B0CF1V291J
Complete Set- Include 1 Pack Aluminum License Plate Light Bracket, Machine License Plate Screws, Can Easily Mount The Trailer Bracket To The 2 Hole License Plate Light Lamp Assembly, Ensuring Easy Installation And A Secure Fit. The Black Plated Screw Caps Match The Universal License Plate Holder And Add An Extra Layer Of Protection Against The Elements.
Easy Mounting- First, Remove The Old License Plate Bracket And The License Plate And Taillight On It; Secondly, Use Our New Aluminum License Plate Holder, After Removing The Blue Protective Film On The Surface, Align The Rear Light Screw, And Fix The License Plate Bracket; Finally, The Vehicle License Plate Is Installed And Fixed.
Easy Mounting- First, Remove The Old License Plate Bracket And The License Plate And Taillight On It; Secondly, Use Our New Aluminum License Plate Holder, After Removing The Blue Protective Film On The Surface, Align The Rear Light Screw, And Fix The License Plate Bracket; Finally, The Vehicle License Plate Is Installed And Fixed.
For Universal Truck License Plate- The Bracket Size Is 9.5" X 5" X 0.6"In, Upgrade Trailer License Plate Holder Never Rust,Superior Aluminum Quality, It's Longer Years Lifetime. Surface With Anti-Scratch Protective Film Protecting Shinny Surface. With An Installation Dimension Of 1-5/8"~2-1/2" For The Bracket And 4"~8-5/8" For The License Plate, Designed For Trucks, Trailers, Rvs, Boats, Snowmobiles, Atvs, And Utility Trailers, This Bracket Is A Perfect Fit For All Your Needs.
Features
- Trailer License Plate Bracket- FBJTDQ Chrome License Plate Holder is made of high-grade Aluminum, is designed for replacing your plastic license plate holder, ensuring its durability and longevity. This license plate holder is designed to with+stand harsh outdoor environments and resist rust and corrosion.The chrome-plated cover adds an aesthetic appeal to your trailer or truck, making it stand out from the rest
- For Universal Truck License Plate- The bracket size is 9.5 x 5 x 0.6in, Upgrade trailer license plate holder Never rust,superior aluminum quality, it's longer years lifetime. Surface with anti-scratch protective film protecting shinny surface. With an installation dimension of 1-5/8~2-1/2 for the bracket and 4~8-5/8 for the license plate, Designed for Trucks, Trailers, RVs, Boats, Snowmobiles, ATVs, and Utility Trailers, This bracket is a perfect fit for all your needs
- Complete Set- Include 1 pack Aluminum license plate light bracket, Machine License Plate Screws, can easily mount the trailer bracket to the 2 hole license plate light lamp assembly, ensuring easy installation and a secure fit. The Black plated screw caps match the universal license plate holder and add an extra layer of protection against the elements
- Easy Mounting- First, remove the old license plate bracket and the license plate and taillight on it; Secondly, use our new aluminum license plate holder, after removing the blue protective film on the surface, align the rear light screw, and fix the license plate bracket; Finally, the vehicle license plate is installed and fixed
- Easy Mounting- First, remove the old license plate bracket and the license plate and taillight on it; Secondly, use our new aluminum license plate holder, after removing the blue protective film on the surface, align the rear light screw, and fix the license plate bracket; Finally, the vehicle license plate is installed and fixed
- See more on Amazon...
Brand: FBJTDQ | Manufacturer: Tuersan
Dimensions: 0.10 x 12.00 x 6.00 inches
See On Amazon #18
OTOW Steel License Plate Holder Bracket and Light Mount for Trailers, Trucks, Cars, Certain Motorcycles
Asin: B07WK6NKXD | Ean: 0746839538290 | UPC: 746839538290
Sturdy Rustproof Steel With Black Polished Surface. Does Not Come With Screws..
Compatible With Most Trailers, Such As Motorcycle, Boat, Transport, Construction, Snowmobile, Etc. Trailers..
For Use With Stud Mount Lights Or Combination Tail Lights And Stop Lights..
2 Top Mounting Holes Are W 0.5" X H 0.4", 1.5" Apart. Light Mount Hole Is W 0.9" X H 1.5". Bottom License Plate Slots Are W 3" X H 0.4", 2.5" Apart. Bottom Section Is Angled At 20 Degrees..
Features
- Angled steel license plate holder bracket, 9.5" x 4.5" x 0.9", 1.58mm thick, 6.7 oz weight.
- 2 top mounting holes are W 0.5 x H 0.4, 1.5 apart. Light mount hole is W 0.9 x H 1.5. Bottom license plate slots are W 3 x H 0.4, 2.5 apart. Bottom section is angled at 20 degrees.
- Sturdy rustproof steel with black polished surface. Does NOT come with screws.
- For use with stud mount lights or combination tail lights and stop lights.
- Compatible with most trailers, such as motorcycle, boat, transport, construction, snowmobile, etc. trailers.
- See more on Amazon...
Brand: OTOW | Manufacturer: OTOW
Dimensions: 0.90 x 9.50 x 4.50 inches
See On Amazon #19
INCLAKE Car Backup Camera, Rear View Camera Ultra HD 12 LED Night Vision, Waterproof Reverse Camera 140 Wide View Angel with Multiple Mount Brackets for Universal Cars, SUV, Trucks, RV and More
Asin: B07VDCJWVL | Ean: 0191281010809 | UPC: 191281010809
【Ip68 Waterproof & 140° View Adjustable Angle】The Camera Will Be Protected From Powerful Jets Of Water From Any Direction, Such As Rain And A Car Wash. Works Well In Extreme Weather. Adjustable Vertical 140° Perfect Viewing Angle, Which Allows You To Adjust The Camera To A Position That’S Best For You, Effectively Reducing The Accident Rate..
【Best Customer Service】Inclake Backup Camera Is Guaranteed To Provide A Safe Road Trip.Feel Free To Contact Us If You Have Any Issues With The Item..
【2 In1 Installation & Tools Included】Camera Can Be Installed On License Plate Frame, Or Mounted On Back, Front, And Side Based On Your Preference. The Camera Or Its Mounting Bracket Will Not Take A Lot Of Space On Your License Plate. Suitable For Most 12V-24V Vehicles, Such As Jeeps, Suv, Rv, Van, Etc..
【12 Led & Superior Night Version】12 Led Super Bright Lights Illuminates The Images When Daylight Is Low, And Greatly Enhances Night Vision With Sharp Images. The Sensor Will Turn On The Light Automatically When You Activate The Reverse Gear, Which Gives You The Best View For Parking..
Features
- Ultra HD Screen & Accurate Color The backup camera is designed to eliminate blind spots and avoid obstacles when reversing. 680P Ultra HD picture shows a clear image for the driver. No more annoying blurry discoloration screen and picture, and displays the most ideal road condition.
- 12 LED & Superior Night Version 12 LED super bright lights illuminates the images when daylight is low, and greatly enhances night vision with sharp images. The sensor will turn on the light automatically when you activate the reverse gear, which gives you the best view for parking.
- IP68 Waterproof & 140 View Adjustable Angle The camera will be protected from powerful jets of water from any direction, such as rain and a car wash. Works well in extreme weather. Adjustable vertical 140 perfect viewing angle, which allows you to adjust the camera to a position that s best for you, effectively reducing the accident rate.
- 2 in1 Installation & Tools Included Camera can be installed on license plate frame, or mounted on back, front, and side based on your preference. The camera or its mounting bracket will not take a lot of space on your license plate. Suitable for most 12V-24V vehicles, such as Jeeps, SUV, RV, VAN, etc.
- Best Customer Service INCLAKE backup camera is guaranteed to provide a safe road trip.Feel free to contact us if you have any issues with the item.
- See more on Amazon...
Brand: INCLAKE | Manufacturer: INCLAKE
Dimensions: 3.43 x 10.43 x 1.65 Inches
See On Amazon #20
American Flag License Plate Frame Holder - 2 Pack Universal Aluminum Matte Stripe US Flag Gloss Patriotic Car Plate Frame Covers with Free Screws Fasteners Caps
Asin: B0BNVPF6XS | Model: HLH-US-PZJ | PartNumber: HLH-US-PZJ
🇺🇸 Easy To Install: The 4 Hole License Plate Frame Is More Secure, And There Will Be No Abnormal Noise During Driving. The American Flag Car License Plate Frame Includes Accessories, Nuts, Anti-Theft Screws, And Comes With Installation Hardware, Including All Accessories Shown In The Figure. The License Plate Frame Is Easy To Install Without Any Special Tools..
🇺🇸 Purchase With Confidence: Please Pay Attention!! Please Identify The Original Lin Kang American Flag License Plate Frame To Ensure Product Quality Assurance And Experience. You Are Backed By A 90-Day Warranty Since The Purchase Date, Feel Free To Send An Email If There’S An Issue, The Solution Will Be Offered Once Details Are Confirmed..
🇺🇸 Durable Plate Frame: Crafted With High Quality Aluminum, Not Cheap Plastic, Never Rusted License Plate Frame. Sleek Edge Frame That Won't Wear Car Paint. Durable Anti-Peel And Anti-Aging, Corrosion Resistant Frames,Protection Clear Coat, Stunning Appearance With Fabric Like Vivid Floating Flag Finish, Never Broken..
🇺🇸 Customized Standard U.S. License Plate Design: The Frame Is Designed For The 12*6 Inch American Standard License Plate. Will Not Block The Registration Sticker, Which Is A Legal Street In Most States. The Unique National Flag Design Makes The License Plate Cover More Beautiful And Cool..
Features
- AMERICAN FLAG PATRIOTIC CAR TAG FRAME: Anodized Aluminum Red American flag License Plate Frame with stainless steel license plate screws make sure the frame and your car/truck/tag plate will never rust,corrode. The USA Flag expresses your patriotism. Go, American!
- CUSTOMIZED STANDARD U.S. LICENSE PLATE DESIGN: The frame is designed for the 12*6 inch American standard license plate. Will not block the registration sticker, which is a legal street in most states. The unique national flag design makes the license plate cover more beautiful and COOL.
- EASY TO INSTALL: The 4 hole license plate frame is more secure, and there will be no abnormal noise during driving. The American flag car license plate frame includes accessories, nuts, anti-theft screws, and comes with installation hardware, including all accessories shown in the figure. The license plate frame is easy to install without any special tools.
- DURABLE PLATE FRAME: Crafted with high quality Aluminum, NOT cheap plastic, never rusted license plate frame. Sleek edge frame that won't wear car paint. Durable Anti-peel And Anti-aging, Corrosion Resistant Frames,Protection Clear Coat, Stunning Appearance With fabric like vivid floating flag Finish, Never Broken.
- PURCHASE WITH CONFIDENCE: Please pay attention!! Please identify the original LIN KANG American flag license plate frame to ensure product quality assurance and experience. You are backed by a 90-Day warranty since the purchase date, feel free to send an email if there s an issue, the solution will be offered once details are confirmed.
- See more on Amazon...
Brand: LIN KANG | Manufacturer: LIN KANG
Dimensions: 0.79 x 8.66 x 7.09 Inches
See On Amazon
Looking For Something Else?
Search