Current Signal Conditioner, ABS DC Signal Isolator with High Accuracy for Transmitter
Asin: B098XCR9TC | Ean: 9011142137869
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Strong Adhesion, Firm Paste, Adhesive Surface, Good Sealing, Easy To Install And Use..
Mainly Used In Interlayer Insulation Packaging Of Transformer, Motors, Motors And Other Electronic Components..
Flame Retardant, High Temperature Resistance, Solvent Resistance, 3000V Voltage Resistance, Stable Glass Fiber Properties..
Heavy Load, Suitable For High Temperature Occasion, The Approved Continuous Working Temperature Can Up To 260 ℃, Passed The Flame Retardant Performance Certification..
High-Quality Abs Material Shell, High Temperature And Impact Resistance, Can Be Used For A Long Time.
Features
- Can be used for induction furnace power supply, high toughness, effective absorption of electrical insulating paint, can withstand 260 high temperature.
- High-quality ABS material shell, high temperature and impact resistance, can be used for a long time
- Strong adhesion, firm paste, adhesive surface, good sealing, easy to install and use.
- Heavy load, suitable for high temperature occasion, the approved continuous working temperature can up to 260 , passed the flame retardant performance certification.
- Mainly used in interlayer insulation packaging of transformer, motors, motors and other electronic components.
- Flame retardant, high temperature resistance, solvent resistance, 3000V voltage resistance, stable glass fiber properties.
- See more on Amazon...
Brand: Leftwei | Manufacturer: Voluxe
Dimensions: 0.39 x 0.39 x 0.39 inches | Weight: 0.32 pounds
See On Amazon Similar To Current Signal Conditioner ABS DC
#1
Comimark 1Pcs DC 5V WCS1800 Hall Current Detection Sensor Module 35A with Overcurrent Lamp
Asin: B07XY7NT6K | Model: LY515 | PartNumber: LY515 | Ean: 0657835717704 | UPC: 657835717704
Interface Definition: Vcc: Power Positive/Dout: Ttl High/Low Level Signal Output/Gnd: Power Negative/Aout: Sampling Current Signal Conversion Voltage Output Port.
We Highly Appreciate All Customers Opinions To Improve The Selling, Also If Anything You Unsatisfied, Please Contact Us For Probable Best Solution..
Package Includes : 1Pcs Module (If The Number Of Products Received Is Incorrect, Please Contact Us . We Will Refund Or Give You A Replacement).
Users Can Preset The Limit Current Value. When The Actual Current Is Higher Than Preset Current, The On-Off Signal Will Become High Level From Low Level, And There Is Led Indicator Lamp. It Is Simple And Easy To Use..
Features
- WCS1800 hall current sensor mainly has two functions: one is followed analog signal via power amplifier, and it can be applied to A/D conversion; the other is on-off signal.
- Users can preset the limit current value. When the actual current is higher than preset current, the on-off signal will become high level from low level, and there is LED indicator lamp. It is simple and easy to use.
- Interface definition: VCC: power positive/DOUT: TTL high/low level signal output/GND: power negative/AOUT: sampling current signal conversion voltage output port
- Package Includes : 1PCS Module (If the number of products received is incorrect, please contact us . we will refund or give you a replacement)
- We highly appreciate all customers opinions to improve the selling, also if anything you unsatisfied, please contact us for probable best solution.
- See more on Amazon...
Brand: Comimark | Manufacturer: Comimark
See On Amazon #2
AstroAI Multimeter Tester 10000 Counts TRMS Auto-Ranging Color LCD Screen Digital Volt Meter, Fast Accurately Measures Voltage Current Amp Resistance Continuity Duty-Cycle Capacitance Temperature
Asin: B091FCWMP1
Unique Design: The Voltmeter Has A Large Lcd Color Screen. With The Backlit Screen Display And Flashlight, You Can Use It In Dim Environment. In Addition, The Multimeter Can Display Real-Time Temperature On The Screen. The Digital Meter Contains A Total Of 6 1.5V Aaa Batteries, 3 Of Which Have Been Installed In The Meter..
Quality Service: The Multimeter Is Designed To Safely And Accurately Troubleshoot Various Automotive And Household Electrical Problems. No Matter Diyers Or Ameteurs, It Is Suitable For Improving Your Home And Business..
Ensure Safety: The Multimeter Is Certified With Ce And Rohs. The Design And Manufacture Of The Instrument Strictly Comply With Iec61010-1 Cat.Iii 1000V, Cat.Iv 600V Overvoltage Safety Standards And Pollution Level 2. The Dual Ceramic Fuses, Which Have Anti-Burn And Overload Protection Functions, Can Effectively Protect The Multimeter. The Silicone Cover Can Protect The Multimeter From Wear And Electric Shock..
Multiple Functions: Astroai Smart Multimeter Can Accurately Measure Ac/Dc Voltage, Ac/Dc Current, 10A Current, And Can Also Be Used To Test Continuity, Capacitance, Frequency, Duty Cycle, Resistance, Diode, Temperature, Ncv And Live Wire. With This Smart Digital Voltmeter, You Can Solve Industrial, Vehicle And Household Electrical Problems..
Features
- Easy to use: The SMART mode of the multimeter can automatically identify voltage, resistance, and continuity. Smart tips for test leads, Real-time temperature display, Data Hold, MAX/MIN values, Auto Shut-down, Low battery prompt, Audio-visual alarm, Fuse Break reminders and other functions make measurement and recording more convenient. Fit both beginners and professionals. The "SMART" function takes some time to judge the signal source, so there will be a little delay .
- Multiple functions: AstroAI smart multimeter can accurately measure AC/DC voltage, AC/DC current, 10A current, and can also be used to test continuity, capacitance, frequency, duty cycle, resistance, diode, temperature, NCV and live wire. With this smart digital voltmeter, you can solve industrial, vehicle and household electrical problems.
- Unique design: The voltmeter has a large LCD color screen. With the backlit screen display and flashlight, you can use it in dim environment. In addition, the multimeter can display real-time temperature on the screen. The digital meter contains a total of 6 1.5V AAA batteries, 3 of which have been installed in the meter.
- Ensure safety: The multimeter is certified with CE and RoHS. The design and manufacture of the instrument strictly comply with IEC61010-1 CAT.III 1000V, CAT.IV 600V overvoltage safety standards and pollution level 2. The dual ceramic fuses, which have anti-burn and overload protection functions, can effectively protect the multimeter. The silicone cover can protect the multimeter from wear and electric shock.
- Quality service: The multimeter is designed to safely and accurately troubleshoot various automotive and household electrical problems. No matter DIYers or ameteurs, it is suitable for improving your home and business.
- See more on Amazon...
Brand: AstroAI | Manufacturer: AstroAI
Dimensions: 2.13 x 7.95 x 4.37 inches | Weight: 1.09 pounds
See On Amazon #3
HiLetgo 3pcs ZMCT103C 5A AC Current Sensor Current Transformer Module Single Phase Active Analog Signal Output with OP Amp
Asin: B0CDWWYLMQ | Model: 3-01-1817 | PartNumber: 3-01-1817
On-Board Micro-Precision Current Transformer And Sampling Resistor.
Single Phase Active Analog Signal Output With Op Amp.
5A Can Be Measured Within An Alternating Current, The Analog Output Corresponding To 5A/5Ma.
Features
- ZMCT103C 5A AC Current Sensor Current Transformer Module
- 5A can be measured within an alternating current, the analog output corresponding to 5A/5mA
- On-board micro-precision current transformer and sampling resistor
- Single Phase Active Analog Signal Output with OP Amp
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #4
hygger Intelligent Auto Top Off System, Aquarium Reef ATO Water Pump Refill Controller with Dual Optical Sensor for Saltwater and Freshwater Tank Supplies
Asin: B0CKQJCTLZ | Model: HG987 | PartNumber: HG987
【Overfill Protection 】 Use A Top Sensor To Sense The High Water Level, The Ato System Alerts With Flashing Led Light And Beeping Sound If There Is Any Malfunctioning With The Device Itself, Auto Shut Off The Water Pump When The Water Level Exceeds The Desired Maximum Top Off Level. It To Be Used In Both Marine And Freshwater Aquariums..
【Packing Include】 1 X Ato Monitor Sensor; 1 X External Sensor; 1 X Water Pump; 1 X 5.9 Ft Soft Hose; 1 X Hose Holder; 1 X User Manual. A Read-To-Go Kit Out Of Box, It Is Easily Installed Via A Magnetic Mounting Which Can Be Used On Tank Glass Up To 1/2'' (12Mm) Thickness..
【Enable Drain Out Water】Comes With A Mini Dc-Powered Water Pump And A Soft Hose Which Can Effectively Pumps Water From Bucket/Jug With A Head Height Of Up To 2 Meters. Vice Versa. It Can Also Drain Dirty Water Out Of The Tank. Flow Rate: 74Gph..
【Dual Fail-Safe Design】 Hygger Auto Top Off Kit Is Composed Of A Controller And A Magnetic Suction Cup. The Magnetic Suction Cup Is Installed On The Inner Side, And The Controller Is Installed On The Outer Side. It Is Aligned With The Water Level Line That Needs To Be Detected, And Then The Power Is Inserted Into The Controller And Powered On To Perform The Detection. Additionally Equipped With One The External Sensor Monitors Reservoir's Water Level To Ensure The Water Pump Not Running Dry As A Result Of Water Drying Out..
Features
- How does it Work This refill control system adopts double optical sensors and is mainly used to monitor water shortage and full water status, control water pumps and solenoid valves. When the water level drops below the detection point of the device, the ATO receives an anhydrous signal, it will automatically control the water pump to refill water. When the water level rises to the set position, it will auto stop adding water.
- Dual Fail-Safe Design hygger auto top off kit is composed of a controller and a magnetic suction cup. The magnetic suction cup is installed on the inner side, and the controller is installed on the outer side. It is aligned with the water level line that needs to be detected, and then the power is inserted into the controller and powered on to perform the detection. Additionally equipped with one the external sensor monitors reservoir's water level to ensure the water pump not running dry as a result of water drying out.
- Overfill Protection Use a top sensor to sense the high water level, the ATO system alerts with flashing led light and beeping sound if there is any malfunctioning with the device itself, auto shut off the water pump when the water level exceeds the desired maximum top off level. It to be used in both marine and freshwater aquariums.
- Enable Drain Out Water Comes with a mini DC-powered water pump and a soft hose which can effectively pumps water from bucket/jug with a head height of up to 2 meters. Vice versa. It can also drain dirty water out of the tank. Flow rate: 74gph.
- Packing Include 1 x ATO monitor sensor; 1 x external sensor; 1 x water pump; 1 x 5.9 ft soft hose; 1 x hose holder; 1 x user manual. A read-to-go kit out of box, it is easily installed via a magnetic mounting which can be used on tank glass up to 1/2'' (12mm) thickness.
- See more on Amazon...
Brand: hygger | Manufacturer: hygger
Dimensions: 2.36 x 3.94 x 1.97 inches | Weight: 0.77 Pounds
Warranty: 1 year manufacturer
See On Amazon #5
Signal Isolator DC 24V,PLC Detect Signal Conditioner,Module Analog Output(One in and one Out 4-20mA Turn 0-10V)
Asin: B0CF5JQXW1 | Ean: 1158321765388
Performance: Input/Output Signal Isolation: Effectively Removes Electromagnetic Interference During Signal Transmission. Input Signal/Power Isolation: Effectively Filters Out Noise In The Signal, Greatly Improving Signal Stability.
Product Material And Safety: Current Signal Conditioner Is Made Of High Quality Electronic Components With High Precision,High Precision, Low Temperature Drift.
Widely Used: Signal Converters Are Widely Used In Industrial Equipment, Such As Large Motors, Medical Equipment,Power System,Mechanical Equipment,Etc..
Specifications: Dc Signal Conditioner Supply Voltage: Dc 24V ± 10%; Rated Power Consumption: 1W; Response Time: 100Ms; Dielectric Strength: 2000V Ac / 1Min; Input Impedance: 50Ω; Ambient Temperature: -20 - 55 (℃); Size: 3.93 × 0.88 × 4.5 Inches..
Features
- Signal Isolator:Input and output,ultra-thin, intelligent and isolated safety net. Channel configuration: 1 input and 1 output.Standard guide rail slot, used in conjunction with guide rails, facilitates dense installation and saves space
- Specifications: DC signal conditioner supply voltage: DC 24V 10%; rated power consumption: 1W; response time: 100MS; dielectric strength: 2000V AC / 1MIN; input impedance: 50 ; ambient temperature: -20 - 55 ( ); size: 3.93 0.88 4.5 Inches.
- Performance: Input/output signal isolation: effectively removes electromagnetic interference during signal transmission. Input signal/power isolation: effectively filters out noise in the signal, greatly improving signal stability
- Widely Used: Signal converters are widely used in industrial equipment, such as large motors, medical equipment,Power system,mechanical equipment,etc.
- Product Material and Safety: Current signal conditioner is made of high quality electronic components with high precision,High precision, low temperature drift
- See more on Amazon...
Brand: nodehawk | Manufacturer: nodehawk
See On Amazon #6
Electronics-Salon Panel Mount AC/DC Current Sensor Module Board, Based on ACS712 (+/-5Amp)
Asin: B0126MELM2 | Ean: 6921407331020
Output Voltage Proportional To Ac Or Dc Currents..
Datasheet: Https://Images-Na.Ssl-Images-Amazon.Com/Images/I/81Crdui0xwl.Pdf.
Fr-4 Fiber Glass Pcb, Dual Copper Layers..
The Item Provides Economical And Precise Solutions For Ac Or Dc Current Sensing In Industrial, Commercial, And Communications Systems. Typical Applications Include Motor Control, Load Detection And Management, Switched-Mode Power Supplies, And Overcurrent Fault Protection. The Device Is Not Intended For Automotive Applications..
Features
- Load Maximum Current: +/-5Amp, +/-20Amp and +/-30Amp selectable. Panel Mount Version.
- The item provides economical and precise solutions for AC or DC current sensing in industrial, commercial, and communications systems. Typical applications include motor control, load detection and management, switched-mode power supplies, and overcurrent fault protection. The device is not intended for automotive applications.
- Output voltage proportional to AC or DC currents.
- FR-4 fiber glass PCB, dual copper layers.
- Datasheet: https://images-na.ssl-images-amazon.com/images/I/81CRdUi0xWL.pdf
- See more on Amazon...
Brand: CZH-LABS | Manufacturer: Electronics-Salon
See On Amazon #7
Eujgoov DC 24V Current Isolator 1 in 1 Out Conditioner Current Voltage Transmitter Provides Isolated Power Distribution for The Transmitter On Site
Asin: B096WPVDM7
Convenient Installation : 35Mm Standard Guide Rail Installation, Convenient Installation And Space?Saving, Strong Versatility..
Application : The Current Generated By The Transmitter Is Isolated And Transmitted From The Field To The Control Room, Plc, Dcs And Other Input Ports..
Strong Anti-Interference Ability : Input, Output, And Power Supply Are Isolated From Each Other, With Strong Anti?Interference Ability And High Reliability..
Properties : Has Insulation, Moisture-Proof, Anti-Leakage, Anti-Vibration, Anti?Aging, Discharge Corona And Other Properties..
Features
- Conformal Coating : Conformal coating is used to protect circuit boards and related equipment from environmental erosion.
- Properties : Has insulation, moisture-proof, anti-leakage, anti-vibration, anti?aging, discharge corona and other properties.
- Convenient Installation : 35mm standard guide rail installation, convenient installation and space?saving, strong versatility.
- Strong Anti-Interference Ability : Input, output, and power supply are isolated from each other, with strong anti?interference ability and high reliability.
- Application : The current generated by the transmitter is isolated and transmitted from the field to the control room, PLC, DCS and other input ports.
- See more on Amazon...
Brand: Eujgoov | Manufacturer: Eujgoov
Dimensions: 0.39 x 0.39 x 0.39 inches
See On Amazon #8
Electronics-Salon DIN Rail Mount AC/DC Current Sensor Module, Based on ACS712 (+/-30Amp)
Asin: B012A23SZ4 | Ean: 6921407352056
Output Voltage Proportional To Ac Or Dc Currents..
Datasheet: Https://Images-Na.Ssl-Images-Amazon.Com/Images/I/81Crdui0xwl.Pdf.
High Quality Fireproof Nylon Material Din Rail Mount Carrier (Not China Low Quality Carrier), Can Support Width 35Mm / 32Mm / 15Mm Rail, And The Carrier Can Be Taken Apart For Pcb Screw Mount Use..
The Item Provides Economical And Precise Solutions For Ac Or Dc Current Sensing In Industrial, Commercial, And Communications Systems. Typical Applications Include Motor Control, Load Detection And Management, Switched-Mode Power Supplies, And Overcurrent Fault Protection..
Features
- Load Maximum Current: +/-5Amp, +/-20Amp and +/-30Amp selectable. Load Frequency Bandwidth: DC ~ 80 kHz. Minimum Isolation Voltage: 2.1 kV(RMS). Operating Voltage: Regulated 5VDC, or 8 ~ 35VDC. Operating Current: 20mA(max).
- The item provides economical and precise solutions for AC or DC current sensing in industrial, commercial, and communications systems. Typical applications include motor control, load detection and management, switched-mode power supplies, and overcurrent fault protection.
- Output voltage proportional to AC or DC currents.
- High quality fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail, and the carrier can be taken apart for PCB screw mount use.
- Datasheet: https://images-na.ssl-images-amazon.com/images/I/81CRdUi0xWL.pdf
- See more on Amazon...
Brand: Electronics-Salon | Manufacturer: Electronics-Salon
See On Amazon #9
4-20 Ma Signal Splitter, 24v Dc Signal Isolator, 24v Dc Signal Isolator 2 in 4 Out Direct Current Signal Conditioner Transmitter PLC Detection (4-20ma)
Asin: B0BYND858H
【High Efficiency】Using Single Chip Microcomputer Chip, With Lower Power, Higher Withstand Voltage, Pcb Transformer, Fast Transmission Response..
【Stable Performance】The Dc Signal Isolator Is Designed With 2 In 4 Out, The Power Supply Is 24V, The Input Signal Is 4‑20Ma, Efficient And Stable In Operation..
【Features】The Signal Transmitter Has Good High And Low Temperature Resistance, Insulation And Shockproof, Not Easy To Moisture, Safe To Use..
【Advantages】Current Isolator With Photoelectric Isolation, Anti High Frequency Interference, Realize Mutual Isolation Of Input And Output, Protect Power Equipment..
Features
- Security Function The signal isolator is made of flame retardant material, with paint spraying, which can protect the circuit from environmental damage.
- Advantages Current isolator with photoelectric isolation, anti high frequency interference, realize mutual isolation of input and output, protect power equipment.
- High Efficiency Using single chip microcomputer chip, with lower power, higher withstand voltage, PCB transformer, fast transmission response.
- Features The signal transmitter has good high and low temperature resistance, insulation and shockproof, not easy to moisture, safe to use.
- Stable Performance The DC signal isolator is designed with 2 in 4 out, the power supply is 24V, the input signal is 4 20mA, efficient and stable in operation.
- See more on Amazon...
Brand: Kuuleyn | Manufacturer: Kuuleyn
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.35 pounds
See On Amazon #10
Electronics-Salon Panel Mount AC/DC Current Sensor Module Board, Based on ACS758 (+/-100Amp)
Asin: B016M5UCFO | Ean: 6921407352162
Output Voltage Proportional To Ac Or Dc Currents..
Specification: Https://Images-Na.Ssl-Images-Amazon.Com/Images/I/81Fxkdlqzml.Pdf.
Operating Voltage: Regulated 5Vdc, Or 8 ~ 35Vdc. Operating Current: 20Ma(Max)..
The Item Of Current Sensor Module Provides Economical And Precise Solutions For Ac Or Dc Current Sensing. Typical Applications Include Motor Control, Load Detection And Management, Power Supply And Dc-To-Dc Converter Control, Inverter Control, And Overcurrent Fault Detection..
Features
- Current Sensor Module Board, +/-50Amp +/-100Amp +/-150Amp selectable, Panel Mount Version.
- The item of current sensor module provides economical and precise solutions for AC or DC current sensing. Typical applications include motor control, load detection and management, power supply and DC-to-DC converter control, inverter control, and overcurrent fault detection.
- Output voltage proportional to AC or DC currents.
- Operating Voltage: Regulated 5VDC, or 8 ~ 35VDC. Operating Current: 20mA(max).
- Specification: https://images-na.ssl-images-amazon.com/images/I/81fxkdlqZML.pdf
- See more on Amazon...
Brand: CZH-LABS | Manufacturer: Electronics-Salon
See On Amazon #11
Slim DIN Rail Mount AC/DC Current Sensor Module, Based on ACS712. (+/-5Amp)
Asin: B082NN7QG3
Load Terminal Block: Pitch 7.62Mm/0.3", Strip Length 8Mm, Screws - M3, Steel, Cr3+ Zn Plated, Pin Header And Cage – Brass, Wire Range 26Awg ~ 10Awg / 4Mm Square, Rated Voltage 300V, Rated Current 30Amp. Power Supply And Signal Terminal Block: Pitch 5.0Mm/0.197", Strip Length 7Mm, Screws - M2.5, Steel, Cr3+ Zn Plated, Pin Header And Cage – Brass, Wire Range 28Awg ~ 12Awg / 2.5Mm Square. Rated Voltage 300V, Rated Current 10Amp..
Datasheet: Https://Images-Na.Ssl-Images-Amazon.Com/Images/I/81Eoq2tsgjl.Pdf.
High Quality Taiwan Dinkle Fireproof Nylon Material Slim Din Rail Mount Carrier, Can Support Width 35 / 32 / 15Mm Rails..
Operating Voltage: Regulated 5Vdc. Operating Current: 20Ma(Max). Load Maximum Current: +/-5Amp, +/-20Amp And +/-30Amp Selectable. Load Frequency Bandwidth: Dc ~ 80 Khz. Minimum Isolation Voltage: 2.1 Kv(Rms). Output Voltage Proportional To Ac Or Dc Currents. Led Indicator For Power Supply +5V. Pin Jumper Option For Signal Output Capacitor..
Features
- The item disign based on ACS712 IC. The item provides economical and precise solutions for AC or DC current sensing in industrial, commercial, and communications systems. Typical applications include motor control, load detection and management, switched-mode power supplies, and overcurrent fault protection.
- Operating Voltage: Regulated 5VDC. Operating Current: 20mA(max). Load Maximum Current: +/-5Amp, +/-20Amp and +/-30Amp selectable. Load Frequency Bandwidth: DC ~ 80 kHz. Minimum Isolation Voltage: 2.1 kV(RMS). Output voltage proportional to AC or DC currents. LED indicator for power supply +5V. Pin jumper option for signal output capacitor.
- Load terminal block: Pitch 7.62mm/0.3, Strip length 8mm, Screws - M3, steel, Cr3+ Zn plated, Pin header and Cage Brass, Wire range 26AWG ~ 10AWG / 4mm square, Rated voltage 300V, rated current 30Amp. Power supply and signal terminal block: pitch 5.0mm/0.197, strip length 7mm, screws - M2.5, steel, Cr3+ Zn plated, pin header and cage brass, Wire range 28AWG ~ 12AWG / 2.5mm square. Rated voltage 300V, rated current 10Amp.
- High quality Taiwan DINKLE Fireproof nylon material Slim DIN rail mount carrier, can support width 35 / 32 / 15mm rails.
- Datasheet: https://images-na.ssl-images-amazon.com/images/I/81eoq2TsgJL.pdf
- See more on Amazon...
Brand: OONO | Manufacturer: CZH-LABS
See On Amazon #12
Electronics-Salon DIN Rail Mount AC/DC Current Sensor Module, Based on ACS712 (+/-5Amp)
Asin: B012A1N0PS | Ean: 6921407352070
Output Voltage Proportional To Ac Or Dc Currents..
Datasheet: Https://Images-Na.Ssl-Images-Amazon.Com/Images/I/81Crdui0xwl.Pdf.
High Quality Fireproof Nylon Material Din Rail Mount Carrier (Not China Low Quality Carrier), Can Support Width 35Mm / 32Mm / 15Mm Rail, And The Carrier Can Be Taken Apart For Pcb Screw Mount Use..
The Item Provides Economical And Precise Solutions For Ac Or Dc Current Sensing In Industrial, Commercial, And Communications Systems. Typical Applications Include Motor Control, Load Detection And Management, Switched-Mode Power Supplies, And Overcurrent Fault Protection..
Features
- Load Maximum Current: +/-5Amp, +/-20Amp and +/-30Amp selectable. Load Frequency Bandwidth: DC ~ 80 kHz. Minimum Isolation Voltage: 2.1 kV(RMS). Operating Voltage: Regulated 5VDC, or 8 ~ 35VDC. Operating Current: 20mA(max).
- The item provides economical and precise solutions for AC or DC current sensing in industrial, commercial, and communications systems. Typical applications include motor control, load detection and management, switched-mode power supplies, and overcurrent fault protection.
- Output voltage proportional to AC or DC currents.
- High quality fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail, and the carrier can be taken apart for PCB screw mount use.
- Datasheet: https://images-na.ssl-images-amazon.com/images/I/81CRdUi0xWL.pdf
- See more on Amazon...
Brand: CZH-LABS | Manufacturer: Electronics-Salon
See On Amazon #13
DC Signal Conditioner, DC 4~20mA Signal Isolator Module Signal Transmitter Conditioner Signal Converter Signal Isolator Transmitter (Two in two out, 0-10V)
Asin: B09NCSQN2C
Signal Isolator Transmitter Specification: Voltage 0~10V, Temperature Range -20~+55℃, Basic Accuracy 0.1% F.S, Response Time ≤10Ms (0-90%) (Typ), Electromagnetic Compatibility In Line With Gb/T 18268, Current Consumption ≤70Ma..
Wide Application: The Signal Converter Is Used To Protect The Circuit Board And Related Equipment From Environmental Erosion.The Dc Signal Isolator Is Resistant To High Frequency Interference, Applicable To A Wider Environment, Suitable For Two-Wire, Three-Wire Transmitter, Current Source..
Fast Transmission Speed: The Optoelectronic Isolator Has The Characteristics Of Good Stability, High Isolation Voltage, Fast Transmission Speed, Fast Response, And High Power Carrying Capacity..
Automatic Compensation Technology: The Signal Transmitter Adopts Automatic Compensation Technology To Achieve A Temperature Drift Of Less Than 25Ppm..
Features
- Anti-jamming Algorithm Software: DC signal conditioner advanced anti-jamming algorithm software can very efficiently identify the input signal interruption rule and irregular interference component.
- Automatic Compensation Technology: The signal transmitter adopts automatic compensation technology to achieve a temperature drift of less than 25ppm.
- Signal Isolator Transmitter Specification: Voltage 0~10V, temperature range -20~+55 , basic accuracy 0.1% F.S, response time 10mS (0-90%) (TYP), electromagnetic compatibility in Line with GB/T 18268, current consumption 70mA.
- Fast Transmission Speed: The optoelectronic isolator has the characteristics of good stability, high isolation voltage, fast transmission speed, fast response, and high power carrying capacity.
- Wide Application: The signal converter is used to protect the circuit board and related equipment from environmental erosion.The DC signal isolator is resistant to high frequency interference, applicable to a wider environment, suitable for two-wire, three-wire transmitter, current source.
- See more on Amazon...
Brand: Agatige | Manufacturer: Agatige
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.33 pounds
See On Amazon #14
Agatige Signal Isolator, DC 0-10V 4~20mA Current Signal Isolator Transmitter PLC Detect Signal Conditioner, DIN Rail Mount, Signal Converter for Large Motors, Mechanical Equipment, One in Two out
Asin: B09NCTCKGL | Model: Agatigevsgeqtp45w-12 | PartNumber: Agatigevsgeqtp45w-12
【Technology】The Signal Transmitter Adopts Automatic Compensation Technology To Achieve Temperature Drift Less Than 25Ppm, Current Consumption: ≤70Ma, Voltage: 0~5V/0~10V (Optional), Advanced Anti-Jamming Algorithm Software Can Be Very Effective In Identifying Input Signal Interruptions Regular And Irregular Interference Components.
【Application】Dc Signal Isolator Is Used To Protect Circuit Boards And Related Equipment From Environmental Damage, Suitable For Industrial Equipment Such As Large Motors, Mechanical Equipment, Etc., Without Affecting The Working Environment Temperature.
【Din Rail Installation】Dc Signal Regulator Adopts Rail Type Installation, Screw Clamp Terminal Design, Easy To Wire, Easy To Install And Use, Easy To Disassemble.
【High Sensitivity】Photoelectric Isolator Resists High Frequency Interference, Higher Isolation Voltage, Faster Transmission Speed, Faster Response, High Signal Fidelity, Large Power Carrying Capacity, And More Stable Work.
Features
- High-quality ABS material The signal isolator is made of high-quality ABS material, which is insulated, low temperature resistant, anti-leakage, moisture-proof, shock-proof, anti-aging, and has a long service life
- High sensitivity photoelectric isolator resists high frequency interference, higher isolation voltage, faster transmission speed, faster response, high signal fidelity, large power carrying capacity, and more stable work
- Technology The signal transmitter adopts automatic compensation technology to achieve temperature drift less than 25ppm, current consumption: 70mA, voltage: 0~5V/0~10V (optional), advanced anti-jamming algorithm software can be very effective in identifying input signal interruptions Regular and irregular interference components
- DIN rail installation DC signal regulator adopts rail type installation, screw clamp terminal design, easy to wire, easy to install and use, easy to disassemble
- Application DC signal isolator is used to protect circuit boards and related equipment from environmental damage, suitable for industrial equipment such as large motors, mechanical equipment, etc., without affecting the working environment temperature
- See more on Amazon...
Brand: Agatige | Manufacturer: Agatige
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.02 pounds
See On Amazon #15
MECCANIXITY Mini PIR Motion Sensor Switch DC 5-24V 5A Infrared Activated LED Controller with USB Couple Cable for LED Strips Lights, Black
Asin: B0BBRKJSLF | Model: mea220526ee0253 | PartNumber: mea220526ee0253
1. The Led Sensor Is Designed With Abs Plastic, Which Is Very Durable And Insulating. 2. Mini Size Does Not Take Up Space. 3. The Switch Setting Can Be Delayed For 5-3600 Seconds, Saving Time And Energy. 4. Infrared Automatic Induction Device No Longer Needs To Manually Switch Lights, Free Hands..
1. Please Don't Expose It To Direct Sunlight, Heaters, Strong Wind, Or Air Conditioners. 2. Please Don't Fix It At Obstacles That Infrared Rays Cannot Penetrate. 3. The Controller Signal Output Line And Input Line Should Be Connected Correctly. Also, Please Attention That This Is Not Applicable For Led Lights With The Modes Feature..
1. When The Pir Sensor Is Started, The Signal Triggered By The Module Is Unstable, And It Needs A "Warm-Up Time" To Work Normally, About 1Min. 2. The Installation Direction Is Left And Right, And The Signal Will Be Better..
The Led Motion Sensor Switch Provides Here Is: Output Current: <5A; Operating Voltage: Dc 5/12/24V; Output Power: <20W; Delay Time: 5-3600 Second; Size: 50X26x22 Mm/1.97X1.02X0.87 Inch(L*W*H);Total Length(Include Cable): 26.5Cm/10.43".
Features
- This PIR motion sensor is an infrared human body sensor switch, which is controlled by motion and is widely used in LED strips, sports lighting, human body monitoring, automatic sensing devices, etc.
- The LED motion sensor switch provides here is: Output Current: <5A; Operating Voltage: DC 5/12/24V; Output Power: <20W; Delay Time: 5-3600 second; Size: 50x26x22 mm/1.97x1.02x0.87 inch(L*W*H);Total Length(Include Cable): 26.5cm/10.43
- 1. The LED sensor is designed with ABS plastic, which is very durable and insulating. 2. Mini size does not take up space. 3. The switch setting can be delayed for 5-3600 seconds, saving time and energy. 4. Infrared automatic induction device no longer needs to manually switch lights, free hands.
- 1. When the PIR sensor is started, the signal triggered by the module is unstable, and it needs a warm-up time to work normally, about 1min. 2. The installation direction is left and right, and the signal will be better.
- 1. Please don't expose it to direct sunlight, heaters, strong wind, or air conditioners. 2. Please don't fix it at obstacles that infrared rays cannot penetrate. 3. The controller signal output line and input line should be connected correctly. Also, please attention that this is not applicable for LED lights with the modes feature.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #16
Agatige DC Conditioner, DC Current Isolator Transmitter 4-20mA PLC Detect Conditioner Analog Signal Isolator Transmitter Splitter, DIN Rail Mount for Large Motors, Two in Two out, 0-5V
Asin: B09NCRHFBW
High Sensitivity: The Photoelectric Isolator Is Resistant To High-Frequency Interference, With Higher Isolation Voltage, Faster Transmission Speed, Faster Response, High Signal Fidelity, Large Carrier Power, Basic Accuracy Of 0.1% F.S, Response Time ≤ 10Ms (0-90%) (Typical), And More Stable Operation..
Advanced Anti-Interference: The Signal Isolator Has Advanced Anti-Interference Algorithm Software Can Effectively Identify Input Signal Interruption Rules And Irregular Interference Components, Made Of High-Quality Abs Material, Which Is Insulated, Low Temperature Resistant, Anti-Leakage, Moisture-Proof, Shock-Proof, Anti-Aging..
Wide Application: Dc Signal Isolator Is Used To Protect Circuit Boards And Related Equipment From Environmental Damage, With A Temperature Range Of - 20 To+55 ℃. It Is Suitable For Industrial Equipment Such As Large Motors And Mechanical Equipment, Without Affecting The Working Environment Temperature..
Din Rail Installation: Current Transmitter Adopts A Rail Type Installation, With Screw Clip Terminal Design, Convenient Wiring, 1 In 2 Out/2 In 2 Out (Optional), Convenient Installation And Use, And Convenient Disassembly ..
Features
- AUTOMATIC COMPENSATION TECHNOLOGY: The signal transmitter adopts automatic compensation technology to achieve temperature drift less than 25 ppm, current consumption 70 mA, voltage: 0~5 V/0~10 V (optional), electromagnetic compatibility in accordance with GB/T 18268.
- DIN RAIL INSTALLATION: Current transmitter adopts a rail type installation, with screw clip terminal design, convenient wiring, 1 in 2 out/2 in 2 out (optional), convenient installation and use, and convenient disassembly .
- HIGH SENSITIVITY: The photoelectric isolator is resistant to high-frequency interference, with higher isolation voltage, faster transmission speed, faster response, high signal fidelity, large carrier power, basic accuracy of 0.1% F.S, response time 10mS (0-90%) (typical), and more stable operation.
- WIDE APPLICATION: DC signal isolator is used to protect circuit boards and related equipment from environmental damage, with a temperature range of - 20 to+55 . It is suitable for industrial equipment such as large motors and mechanical equipment, without affecting the working environment temperature.
- ADVANCED ANTI-INTERFERENCE: The signal isolator has advanced anti-interference algorithm software can effectively identify input signal interruption rules and irregular interference components, made of high-quality ABS material, which is insulated, low temperature resistant, anti-leakage, moisture-proof, shock-proof, anti-aging.
- See more on Amazon...
Brand: Agatige | Manufacturer: Agatige
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.33 pounds
See On Amazon #17
DC Analog Signal Converter Isolator4-20mA to 0-10V 0-5V Signal Isolator Voltage Current Signal Splitter Conditioner SWK-GLK (Color : 1 Input 2 Output, Size : 0-10MA OUPUT_0-20MA Input_DC12 to 24V PO
Asin: B0D2N6YL1J | Model: ROUPWKWO | PartNumber: ROUPWKWO | Ean: 9120320781227
Strong Adaptability: Through-Heart Structure Design, The Isolation Withstand Voltage. The Magnetic Hysteresis Is Less So This Ac Current Transducer Can Be Used In Field Conditions..
High Isolation: Our Current Sensor Transformer Has The Advanced Characteristics Of Strong Overload Ability, High Precision, High Isolation, High Security, Low Power Consumption And Strong An-Ti-Interference Ability..
Extensive Applications: This Current Transmitter Is Widely Used For Ac Current Monitoring, Detection, Current Overload Protection, And This Ac Current Converter Is Also Used As An Electronic Switch For Automatic Control Systems..
Easy Used: The Installation And Using For Users Are Really Easy And Convenient, There Is No Need To The Dc Series Into The Circuit During Measurement, So Users Can Rest Assured To Use And Operate..
Working Principle: The Ac Current Transducer Provides Real-Time Isolated Measurement Of Ac Current In The Grid Or Circuit And Converts It To A Dc Current Output Signal..
Features
- If you have any other auto parts needed , please be free to let us help you .
- WORKING PRINCIPLE: The AC current transducer provides real-time isolated measurement of AC current in the grid or circuit and converts it to a DC current output signal.
- STRONG ADAPTABILITY: Through-heart structure design, the isolation withstand voltage. The magnetic hysteresis is less so this AC current transducer can be used in field conditions.
- EASY USED: The installation and using for users are really easy and convenient, there is no need to the DC series into the circuit during measurement, so users can rest assured to use and operate.
- HIGH ISOLATION: Our current sensor transformer has the advanced characteristics of strong overload ability, high precision, high isolation, high security, low power consumption and strong an-ti-interference ability.
- EXTENSIVE APPLICATIONS: This current transmitter is widely used for AC current monitoring, detection, current overload protection, and this AC current converter is also used as an electronic switch for automatic control systems.
- See more on Amazon...
Brand: ROUPWKWO | Manufacturer: ROUPWKWO
Weight: 0.11 pounds
See On Amazon #18
DC Signal Isolator 0-10V DC Signal Isolator, Signal Conditioner to DC24V 1 in 1 Out DC Current Signal Isolator Current Voltage Distribution Transmitter 35mm Rail Mount
Asin: B0D2KKVPTZ | Model: Mumusuki7bx26c9dyz | PartNumber: Mumusuki7bx26c9dyz
Input, Output, And Power Supply Are Isolated From Each Other, With Strong Anti‑Interference Ability And High Reliability..
The Current Signal Generated By The Transmitter Is Isolated And Transmitted From The Field To The Control Room, Plc, Dcs And Other Input Ports..
35Mm Standard Guide Rail Installation, Convenient Installation And Space‑Saving, Strong Versatility..
Has Insulation, Moisture‑Proof, Anti‑Leakage, Anti‑Vibration, Anti‑Aging, Discharge And Other Properties..
Features
- Conformal coating is used to protect circuit boards and related equipment from environmental erosion.
- Has insulation, moisture proof, anti leakage, anti vibration, anti aging, discharge and other properties.
- Input, output, and power supply are isolated from each other, with strong anti interference ability and high reliability.
- 35mm standard guide rail installation, convenient installation and space saving, strong versatility.
- The current signal generated by the transmitter is isolated and transmitted from the field to the control room, PLC, DCS and other input ports.
- See more on Amazon...
Brand: Mumusuki | Manufacturer: Mumusuki
Warranty: Manufacturer warranty for 90 day
See On Amazon #19
Brilluxa PLC Detect Conditioner Converter 2 in 2 Out Current Isolator Transmitter DC 4 20mA DC 24V Module Analog Output for PLC Control
Asin: B0D249HLR5 | Model: Brilluxakxc5yvfdz6 | PartNumber: Brilluxakxc5yvfdz6
Extensive Using: A Component Of Industrial Control Systems, Applied To Equipment And Instruments That Require Electrical Isolation..
Easy To Install: Comes With A Light Weight And A Compact Size As Well, The Signal Isolator Supports Convenient 35Mm Din Rail Mount..
Premium Cooking: Both Side Boards Are Designed To Have Cooling Holes, So The Current Signal Transmitter Has Higher Working Safety..
Stable In Works: Equipped With Anti Interference Chip Board, The Current Signal Isolator Has Low Temp Drift And Good Work Stability..
Features
- Signal Isolator: The 2 in 2 out DC 4-20mA signal isolator ensures stable transmission, which will better promote the overall control.
- Stable in Works: Equipped with anti interference chip board, the current signal isolator has low temp drift and good work stability.
- Extensive Using: A component of industrial control systems, applied to equipment and instruments that require electrical isolation.
- Premium Cooking: Both side boards are designed to have cooling holes, so the current signal transmitter has higher working safety.
- Easy to Install: Comes with a light weight and a compact size as well, the signal isolator supports convenient 35mm DIN rail mount.
- See more on Amazon...
Brand: Brilluxa | Manufacturer: Brilluxa
Warranty: Manufacturer warranty for 90 day
See On Amazon #20
XTevu DC Conditioner Current Signal Isolator 2 in 2 Out Signal Transmitter DC 4 20mA DC 24V DC Current Isolator Transmitter for PLC Control
Asin: B0D233642H | Model: XTevu7c9d5ianhp | PartNumber: XTevu7c9d5ianhp
Extensive Using: A Component Of Industrial Control Systems, Applied To Equipment And Instruments That Require Electrical Isolation..
Easy To Install: Comes With A Light Weight And A Compact Size As Well, The Signal Isolator Supports Convenient 35Mm Din Rail Mount..
Premium Cooking: Both Side Boards Are Designed To Have Cooling Holes, So The Current Signal Transmitter Has Higher Working Safety..
Stable In Works: Equipped With Anti Interference Chip Board, The Current Signal Isolator Has Low Temp Drift And Good Work Stability..
Features
- Signal Isolator: The 2 in 2 out DC 4-20mA signal isolator ensures stable transmission, which will better promote the overall control.
- Stable in Works: Equipped with anti interference chip board, the current signal isolator has low temp drift and good work stability.
- Extensive Using: A component of industrial control systems, applied to equipment and instruments that require electrical isolation.
- Premium Cooking: Both side boards are designed to have cooling holes, so the current signal transmitter has higher working safety.
- Easy to Install: Comes with a light weight and a compact size as well, the signal isolator supports convenient 35mm DIN rail mount.
- See more on Amazon...
Brand: XTevu | Manufacturer: XTevu
Dimensions: 1.18 x 5.51 x 4.33 inches
See On Amazon
Looking For Something Else?
Search