SparkFun Air Quality Sensor - SGP40 (Qwiic) - Measure The Quality of air in Your Room or House MOX (Metal Oxide) Sensor Detect Volatile Organic Compounds (VOCs) - Operating Voltage Range 1.7v - 3.6v
Asin: B099177QKM | Ean: 0845156011599 | UPC: 845156011599
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Output Signal: Digital Raw Value (Sraw): 0 - 65535 Ticks, Digital Processed Value (Voc Index): 0 - 500 Voc Index Points.
Recommended Sampling Interval: Voc Index: 1S, Sraw: 0.5S - 10S (Typ. 1S).
Switch-On Behavior: Time Until Reliably Detecting Voc Events: <60S, Time Until Specifications Are Met: <1H.
Typical Current Consumption: 2.6Ma During Continuous Operation (At 3.3V), 34Μa When Idle (Heater Off).
Features
- Uses I2C interface (Qwiic-enabled): I2C Address: 0x59, 2x Qwiic connectors; Operating voltage range: 1.7V - 3.6V (Typ. 3.3V), The Qwiic interface provides 3.3V
- Typical current consumption: 2.6mA during continuous operation (at 3.3V), 34 A when idle (heater off)
- Output signal: Digital raw value (SRAW): 0 - 65535 ticks, Digital processed value (VOC Index): 0 - 500 VOC Index points
- Switch-on behavior: Time until reliably detecting VOC events: <60s, Time until specifications are met: <1h
- Recommended sampling interval: VOC Index: 1s, SRAW: 0.5s - 10s (Typ. 1s)
- See more on Amazon...
Brand: SparkFun | Manufacturer: SparkFun Electronics
Dimensions: 0.24 x 1.02 x 1.02 inches | Weight: 0.01 Pounds
See On Amazon Similar To SparkFun Air Quality Sensor SGP40
#1
SparkFun Weather Shield utilizes The Si7021 Humidity/Temperature Sensor, The MPL3115A2 barometric Pressure Sensor and The ALS-PT19 Light Sensor
Asin: B06XQ1M8Z3 | Model: DEV-13956 | PartNumber: DEV-13956 | Ean: 0845156007844 | UPC: 845156007844
This Weather Shield Features: Humidity/Temperature Sensor --- Si7021. Barometric Pressure --- Mpl3115a2. Light Sensor --- Als-Pt19.
Note: The Weather Shield Comes As A Stand-Alone Board. Headers, Connectors And Additional Sensors Will Need To Be Purchased Separately..
Each Shield Comes With Two Unpopulated Rj11 Connector Spaces (For Optional Hookup Of Rain And Wind Sensors) And A 6-Pin Gps Connector (For Optional Hookup Of A Gp-735 Gps Module). Finally, Each Weather Shield Can Operate From 3.3V Up To 16V And Has Built-In Voltage Regulators And Signal Translators..
The Weather Shield Utilizes The Si7021 Humidity/Temperature Sensor, The Mpl3115a2 Barometric Pressure Sensor And The Als-Pt19 Light Sensor. The Shield Relies On The Si7021 And Mpl3115a2 Libraries..
Features
- The SparkFun Weather Shield is an easy-to-use Arduino shield that grants you access to barometric pressure, relative humidity, luminosity and temperature.
- The Weather Shield utilizes the Si7021 humidity/temperature sensor, the MPL3115A2 barometric pressure sensor and the ALS-PT19 light sensor. The shield relies on the Si7021 and MPL3115A2 libraries.
- This Weather Shield Features: Humidity/Temperature Sensor --- Si7021. Barometric Pressure --- MPL3115A2. Light Sensor --- ALS-PT19
- Each shield comes with two unpopulated RJ11 connector spaces (for optional hookup of rain and wind sensors) and a 6-pin GPS connector (for optional hookup of a GP-735 GPS module). Finally, each Weather Shield can operate from 3.3V up to 16V and has built-in voltage regulators and signal translators.
- Note: The Weather Shield comes as a stand-alone board. Headers, connectors and additional sensors will need to be purchased separately.
- See more on Amazon...
Brand: SparkFun | Manufacturer: SparkFun Electronics
Dimensions: 0.24 x 2.95 x 3.15 inches
See On Amazon #2
SparkFun Electronics BOB-13878 SparkFun Accessories Load Sensor Combinator Ver. 1.1
Asin: B079L3675N | Model: 474-BOB-13878 | PartNumber: 474-BOB-13878 | Ean: 0748347531787, 0653958410799 | UPC: 653958410799, 748347531787
Brand: SparkFun | Manufacturer: SparkFun Electronics
Dimensions: 0.10 x 1.00 x 1.00 inches
See On Amazon #3
2PCS SGP30 Air Measurement Gas Sensor TVOC/eCO2 Air Quality Carbon Dioxide Detector to Replace CCS811 Carbon Dioxide CO2 VOCs Air Quality Gas Sensor Module for Arduino 2PCS
Asin: B09SH53B58 | Ean: 0701715513389 | UPC: 701715513389
The Gy-Sgp30 Tvoc / Eco2 Gas Sensor Module Measures Air Quality..
You Will Get 2Pcs Gy- Sgp30 Air Quality Gas Sensor Tvoc Eco2 Carbon Dioxide Measurement Formaldehyde Module.
Made Of High-Quality Metal Materials, Wear-Resistant And Anti-Corrosion, More Stable Performance And Longer Service Life..
To Replace The Ccs811.
Features
- I2C communication, power supply compatible with 2v-5v.
- To replace the ccs811
- The Gy-SGP30 TVOC / eco2 gas sensor module measures air quality.
- Made of high-quality metal materials, wear-resistant and anti-corrosion, more stable performance and longer service life.
- you will get 2pcs GY- SGP30 Air Quality Gas Sensor TVOC ECO2 Carbon Dioxide Measurement Formaldehyde Module
- See more on Amazon...
Brand: AITRIP | Manufacturer: AITRIP
See On Amazon #4
Digital SGP40 VOC (Volatile Organic Compounds) Gas Sensor for Easy Integration Into Air Treatment Devices and Air Quality Monitors, I2C Bus Compatible with Raspberry Pi/STM32
Asin: B09FKFYMPR | Model: BC-Digital SGP40 VOC Sensor | PartNumber: BC-Digital SGP40 VOC Sensor
Incorporates Sgp40, For Measuring 0 ~ 1000 Ppm Of Ethanol Equivalents. Features Humidity-Compensation And Low-Heat-Dissipation, Providing Outstanding Performance On Sorts Of Environments..
Comes With Development Resources And Manual (Examples For Raspberry Pi/Arduino/Stm32)..
Onboard Voltage Translator, Compatible With 3.3V/5V Operating Voltage. Digital I2c Output, Less Interference. I2c Control Interface: Supports Host Boards Including Raspberry Pi/Arduino/Stm32....
The Sgp40 Voc Sensor Is Small In Size For Easy Integration Into Air Treatment Devices And Air Quality Monitors, Definitely An Ideal Choice For Learning Air Quality Monitoring..
Features
- The SGP40 VOC Sensor is a digital VOC (Volatile Organic Compounds) sensor module which incorporates SGP40, designed for air quality monitoring. It can be used to measure fire coal, natural gas emissions, cigarette/cooking smoke, and emissions from constructing activity, decoration material, furnitures, home appliances, then generate digital signals for triggering air treatment devices.
- The SGP40 VOC Sensor is small in size for easy integration into air treatment devices and air quality monitors, definitely an ideal choice for learning air quality monitoring.
- Incorporates SGP40, for measuring 0 ~ 1000 ppm of ethanol equivalents. Features humidity-compensation and low-heat-dissipation, providing outstanding performance on sorts of environments.
- Onboard voltage translator, compatible with 3.3V/5V operating voltage. Digital I2C output, less interference. I2C control interface: supports host boards including Raspberry Pi/Arduino/STM32...
- Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32).
- See more on Amazon...
Brand: waveshare | Manufacturer: Waveshare
See On Amazon #5
SparkFun CO2 Humidity and Temperature Sensor - SCD40 (Qwiic) high-Accuracy Environmental Readings, Capable of Detecting concentrations from 0 to 40000 ppm. Board Dimensions: (inches) 1.00 x 1.00
Asin: B0C9SMVLZ7 | Model: SEN-22395 | PartNumber: SEN-22395 | Ean: 0845156013463 | UPC: 845156013463
The Scd40 Has An Integrated Temperature And Humidity Cmos Sensor To Improve Accuracy. For Additional Accuracy, The Scd40 Also Accepts Ambient Pressure Readings! All This Functionality Comes In Our Standard 1In. X 1In. Qwiic Form Factor And Will Seamlessly Integrate Into Your Qwiic-Based Projects. However, We Still Routed The I2c Signals Out To A Set Of 0.1In.-Spaced Pins For Users Who Prefer A Soldered Connection..
For Additional Accuracy, The Scd40 Also Accepts Ambient Pressure Readings! All This Functionality Comes In Our Standard 1In. X 1In. Qwiic Form Factor And Will Seamlessly Integrate Into Your Qwiic-Based Projects. However, We Still Routed The I2c Signals Out To A Set Of 0.1In.-Spaced Pins For Users Who Prefer A Soldered Connection..
The Scd40 Includes An Automatic Self-Calibration Routine To Automatically Adjust To Its Sensing Environment Over A Seven-Day Calibration Period. For Best Results, Sensirion Recommends Taking Continuous Readings For At Least One Hour A Day Of 'Fresh Air' For The Calibration Period To Complete..
The Scd40 Uses Sensirion's Pasens Photoacoustic Measurement System That Combines Narrow-Band Ir Light And A Microphone Inside The Sensing Package Capable Of Detecting Concentrations From 0 To 40000 Ppm With High Accuracy Over 400-2000 Ppm ±(50 Ppm+5%)..
Features
- The SparkFun CO2 Humidity and Temperature Sensor - SCD40 (Qwiic) features the SCD40 CO2 from Sensirion.
- The SCD40 uses Sensirion's PASens photoacoustic measurement system that combines narrow-band IR light and a microphone inside the sensing package capable of detecting concentrations from 0 to 40000 ppm with high accuracy over 400-2000 ppm (50 ppm+5%).
- The SCD40 has an integrated temperature and humidity CMos sensor to improve accuracy. For additional accuracy, the SCD40 also accepts ambient pressure readings! All this functionality comes in our standard 1in. x 1in. Qwiic form factor and will seamlessly integrate into your Qwiic-based projects. However, we still routed the I2C signals out to a set of 0.1in.-spaced pins for users who prefer a soldered connection.
- The SCD40 includes an automatic self-calibration routine to automatically adjust to its sensing environment over a seven-day calibration period. For best results, Sensirion recommends taking continuous readings for at least one hour a day of 'fresh air' for the calibration period to complete.
- For additional accuracy, the SCD40 also accepts ambient pressure readings! All this functionality comes in our standard 1in. x 1in. Qwiic form factor and will seamlessly integrate into your Qwiic-based projects. However, we still routed the I2C signals out to a set of 0.1in.-spaced pins for users who prefer a soldered connection.
- See more on Amazon...
Brand: SparkFun | Manufacturer: SparkFun Electronics
Dimensions: 0.35 x 1.06 x 1.06 inches | Weight: 0.10 pounds
See On Amazon #6
JESSINIE SGP30 Gas Detector Sensor Module TVOC/eCO2 Indoor Air Measurement Detector TVOC CO2eq Low Power Consumption 48mA 1.8V Multi Pixel Digital Gas Sensor Module IIC I2C Air Quality Monitor
Asin: B0BBLT3LRC | Model: SGP3 | PartNumber: SGP3
Sgp30 Is A Metal Oxide Gas Sensor With Multiple Sensing Elements On A Single Chip, Which Can Provide Detailed Information About Air Quality And Has Excellent Stability..
Supply Voltage: 3.3V, Supply Current In Measurement Mode: 48.2Ma, Sleep Current: 2-10Μa.
Sgp30 Tvoc/Eco2 Is A Multi-Pixel Gas Sensor For Indoor Air Quality Applications. It Has The Ability To Resist Polluted Gases In Practical Applications, As Well As A Waterproof And Dustproof Protective Film.
I2c Interface With Tvoc And Co2eq Output Signals And With Low Power Consumption Mode.
Features
- The SGP30 is a digital multi-pixel gas sensor designed for easy integration into air purifier, demand-controlled ventilation, and IoT applications.
- I2C interface with TVOC and CO2eq output signals and with low power consumption mode
- SGP30 is a metal oxide gas sensor with multiple sensing elements on a single chip, which can provide detailed information about air quality and has excellent stability.
- SGP30 TVOC/eCO2 is a multi-pixel gas sensor for indoor air quality applications. It has the ability to resist polluted gases in practical applications, as well as a waterproof and dustproof protective film
- Supply voltage: 3.3V, Supply current in measurement mode: 48.2mA, Sleep current: 2-10 A
- See more on Amazon...
Brand: JESSINIE | Manufacturer: JESSINIE
Dimensions: 0.70 x 7.08 x 4.72 Inches
See On Amazon #7
HiLetgo SGP40 TVOC eCO2 CO2 Carbon Dioxide Sensor Formaldehyde Air Quality Monitoring Sensor Indoor Air Quality Gas Sensor Module GY- SGP40
Asin: B0CDWSJ3ZS
Very Suitable For Air Purifiers Or Demand-Controlled Ventilation Systems Etc.
Gy- Sgp40 Air Quality Monitoring Sensor Module.
Features
- SGP40 TVOC eCO2 CO2 Carbon Dioxide Sensor
- GY- SGP40 Air Quality Monitoring Sensor Module
- Very suitable for air purifiers or demand-controlled ventilation systems etc
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #8
Sgp30 Eco2 Detector Module Air Quality Sensor Module Blue Gy Sgp30 Eco2 Detector Module
Asin: B0C4RPNB9H | Model: Qiiluqf32a4sw80 | PartNumber: Qiiluqf32a4sw80
Sgp30 Easy For Integration And For Integration Of Metal Oxide Gas Sensors Into Mobile Devices Opens Up New Possibilities For Environmental Monitoring In For Smart Home, Home Appliances And Iot Applications.
Air Quality Sensor Module The Pin Has Good Contact Performance, Ensure Stable Working.
Sensor Simple And Reasonable Circuit Structure, Convenient To Operate..
Eco2 Detector Module The Module Has Four Gas Sensing Cfor Omponents With Fully Calibrated Air Quality Output Signals.
Features
- Sgp30 Sgp30 Is A Metal Oxide Gas Sensor With Multiple Sensing Cfor OMPonent On A Single Chip
- Eco2 Detector Module The Module Has Four Gas Sensing Cfor OMPonents With Fully Calibrated Air Quality Output Signals
- Sgp30 Easy for INTEGRAtion And for INTEGRAtion Of Metal Oxide Gas Sensors Into Mobile Devices Opens Up New Possibilities For Environmental Monitoring In for Smart Home, Home Appliances And Iot Applications
- Sensor Simple And Reasonable Circuit Structure, Convenient To Operate.
- Air Quality Sensor Module The Pin Has Good Contact Performance, Ensure Stable Working
- See more on Amazon...
Brand: KIMISS | Manufacturer: Qiilu
Dimensions: 0.39 x 3.15 x 1.97 inches
See On Amazon #9
SparkFun Qwiic Starter Kit SparkFun VCNL4040 Proximity Sensor Breakout, SparkFun Micro OLED Breakout, SparkFun BME280 Atmospheric Sensor Breakout, and SparkFun SGP40 Air Quality Sensor.
Asin: B0CD3JZNY2 | Ean: 0845156013067 | UPC: 845156013067
Take Sensor Readings From Each Qwiic-Enabled Board Using Python To Measure Proximity, Ambient Light, Barometric Pressure, Humidity, Temperature, And Voc Index. Then Output The Data Through The Micro Oled Display Or A Monitor Using The Serial Terminal..
Includes: 1X Sparkfun Qwiic Phat V2.0, 1X Sparkfun Micro Oled Breakout (Qwiic) 1X Sparkfun Proximity Sensor Breakout - 20Cm, Vcnl4040 (Qwiic) 1X Sparkfun Atmospheric Sensor Breakout - Bme280 (Qwiic) 1X Sparkfun Air Quality Sensor - Sgp40 (Qwiic)* 2X Flexible Qwiic Cable - 50Mm, 2X Flexible Qwiic Cable - 100Mm.
This Kit Can Also Be Used With The Nvidia Jetson Nano Developer Kit And Google Coral Development Board, (Both Sold Separately) Since They Utilize The Same 2X20 Gpio Header!.
It Also Includes Four Qwiic-Enabled Boards: Sparkfun Vcnl4040 Proximity Sensor Breakout, Sparkfun Micro Oled Breakout, Sparkfun Bme280 Atmospheric Sensor Breakout, And Sparkfun Sgp40 Air Quality Sensor..
Features
- The SparkFun Qwiic Kit includes a shield with headers, three Qwiic-enabled breakout boards, and four cables to help make I2C easier!
- It also includes four Qwiic-enabled boards: SparkFun VCNL4040 Proximity Sensor Breakout, SparkFun Micro OLED Breakout, SparkFun BME280 Atmospheric Sensor Breakout, and SparkFun SGP40 Air Quality Sensor.
- Take sensor readings from each Qwiic-enabled board using Python to measure proximity, ambient light, barometric pressure, humidity, temperature, and VOC Index. Then output the data through the Micro OLED display or a monitor using the serial terminal.
- This kit can also be used with the NVIDIA Jetson Nano Developer Kit and Google Coral Development Board, (Both Sold Separately) Since they utilize the same 2x20 GPIO header!
- Includes: 1x SparkFun Qwiic pHAT v2.0, 1x SparkFun Micro OLED Breakout (Qwiic) 1x SparkFun Proximity Sensor Breakout - 20cm, VCNL4040 (Qwiic) 1x SparkFun Atmospheric Sensor Breakout - BME280 (Qwiic) 1x SparkFun Air Quality Sensor - SGP40 (Qwiic)* 2x Flexible Qwiic Cable - 50mm, 2x Flexible Qwiic Cable - 100mm
- See more on Amazon...
Brand: SparkFun | Manufacturer: SparkFun Electronics
Dimensions: 1.34 x 5.16 x 4.06 inches
See On Amazon #10
Air Quality Sensor Module, GY- SGP30 I2C Communication Gas Sensor Module, 2V-5V ECO2 Detector Module for Home Appliances Environmental Monitoring
Asin: B08YD8CZFV | Model: GY SGP30 | PartNumber: GY SGP30 | Ean: 9095247426936
【Calibrated High】The Module Has Four Gas Sensing Components With Fully Calibrated Air Quality Output Signals.
【Easy To Use】Air Quality Sensor Module, Simple And Reasonable Circuit Structure, Convenient To Operate..
【Sensitive Pin】Gy- Sgp30 Gas Sensor Module, The Pin Has Good Contact Performance, Ensure Stable Working.
【Environmental Monitoring】Easy Integration And Integration Of Metal Oxide Gas Sensors Into Mobile Devices Opens Up New Possibilities For Environmental Monitoring In Smart Home, Home Appliances And Iot Applications.
Features
- Gas Sensor SGP30 is a metal oxide gas sensor with multiple sensing component on a single chip
- Environmental Monitoring Easy integration and integration of metal oxide gas sensors into mobile devices opens up new possibilities for environmental monitoring in smart home, home appliances and IoT applications
- Calibrated High The module has four gas sensing components with fully calibrated air quality output signals
- Sensitive Pin GY- SGP30 Gas Sensor Module, The pin has good contact performance, ensure stable working
- Easy To Use Air Quality Sensor Module, Simple and reasonable circuit structure, convenient to operate.
- See more on Amazon...
Brand: AMONIDA | Manufacturer: AMONIDA
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.00 pounds
See On Amazon #11
SparkFun Soil Moisture Sensor
Asin: B077GGPFD3 | Ean: 0757347352889 | UPC: 757347352889
The Two Large Exposed Pads Function As Probes For The Sensor, Together Acting As A Variable Resistor..
Skill Level : Assembled And Tested.
The More Water That Is In The Soil Means The Better The Conductivity Between The Pads Will Be And Will Result In A Lower Resistance, And A Higher Sig Out..
The Soil Moisture Sensor Is Pretty Straight Forward To Use..
Features
- The SparkFun Soil Moisture Sensor is a simple breakout for measuring the moisture in soil and similar materials.
- The soil moisture sensor is pretty straight forward to use.
- The two large exposed pads function as probes for the sensor, together acting as a variable resistor.
- The more water that is in the soil means the better the conductivity between the pads will be and will result in a lower resistance, and a higher SIG out.
- Skill Level : Assembled and Tested
- See more on Amazon...
Brand: SparkFun | Manufacturer: Electronics123.com, Inc
Weight: 0.00 pounds
See On Amazon #12
Air Quality Sensor Module GY- SGP30 eCO2 Detector Module for Environmental Monitoring
Asin: B085NW2JLJ
Easy Integration And Integration Of Metal Oxide Gas Sensors Into Mobile Devices Opens Up New Possibilities For The Environment..
If You Have Any Questions About Our Products And Services, Please Feel To Contact Us, We Will Reply You As Soon As Possible..
Simple And Reasonable Circuit Structure, Convenient To Operatemonitoring In Smart Home, Home Appliances And Iot Applications..
Carbon Oxide Measurement Module With Four Gas Sensing Components For Fully Calibrated Air Quality Output ..
Features
- SGP30 air quality gas sensor is a metal oxide gas sensor with multiple sensing components on a single chip.
- Carbon oxide measurement module with four gas sensing components for fully calibrated air quality output .
- Easy integration and integration of metal oxide gas sensors into mobile devices opens up new possibilities for the environment.
- Simple and reasonable circuit structure, convenient to operatemonitoring in smart home, home appliances and IoT applications.
- If you have any questions about our products and services, please feel to contact us, we will reply you as soon as possible.
- See more on Amazon...
Brand: FTVOGUE | Manufacturer: FTVOGUE
Dimensions: 0.00 x 0.00 x 0.00 inches
See On Amazon #13
Generic #icpart SGP41 SGP40 SGP30 Air Sensor Digital TVOC Detection Chip Compatible for Arduino Demo Board - (Color: GY-SGP41) #icpart262092
Asin: B0CX4ZLDSR
Package Included: 1 Set Only..
Features
- You are Choosing: Color: GY-SGP41 . Please check all carefully (photos and model) and make sure it will compatible with your original one. Type: Voltage Regulator
- Package included: 1 Set ONLY.
- See more on Amazon...
Brand: Generic | Manufacturer: Generic
See On Amazon #14
#icpart SGP41 SGP40 SGP30 Air Sensor Digital TVOC Detection Chip Compatible for Arduino Demo Board - (Color: SGP30) #icpart246302
Asin: B0CS347VLV
Package Included: 1 Set Only..
Features
- You are Choosing: Color: SGP30 . Please check all carefully (photos and model) and make sure it will compatible with your original one. Type: Voltage Regulator
- Package included: 1 Set ONLY.
- See more on Amazon...
Brand: Generic | Manufacturer: Generic
See On Amazon #15
EVTSCAN Latest GY- SGP30 Air Quality Sensor Module Breakout - Voc and Eco2 Formaldehyde Detector Voc and Eco2 Air Quality Sensor(Blue)
Asin: B09CV6GZYB | Model: 20212021 | PartNumber: 20212021
Wide Usage :Sgp Is Easy To Integrate And Integrates Metal Oxide Gas Sensors Into Mobile Devices, Opening Up New Possibilities For Environmental Monitoring In Smart Home, Home Appliances And Iot Applications..
Made Of High-Quality Metal Materials, Wear-Resistant And Anti-Corrosion, More Stable Performance And Longer Service Life..
Circuit Is Simple And Reasonable Structure, Simple Operation..
It Integrates :Four Gas Sensing Elements With A Fully Calibrated Air Quality Output Signal..
Features
- High quality : 2021 Improved Version, The SGP30 is a metal oxide gas sensor with multiple sensing elements on a single chip.
- It integrates :four gas sensing elements with a fully calibrated air quality output signal.
- Wide usage :SGP is easy to integrate and integrates metal oxide gas sensors into mobile devices, opening up new possibilities for environmental monitoring in smart home, home appliances and IoT applications.
- Circuit is simple and reasonable structure, simple operation.
- Made of high-quality metal materials, wear-resistant and anti-corrosion, more stable performance and longer service life.
- See more on Amazon...
Brand: EVTSCAN | Manufacturer: EVTSCAN
Dimensions: 0.00 x 0.00 x 0.00 inches
See On Amazon #16
Sparkfun Essential Sensor Kit
Asin: B06ZXSP4RV | Model: SEN-12862 | PartNumber: SEN-12862 | Ean: 0645220827855 | UPC: 645220827855
Brand: SparkFun | Manufacturer: SparkFun
Dimensions: 1.00 x 5.00 x 4.00 inches | Weight: 0.11 pounds
See On Amazon
Looking For Something Else?
Search