NPN Output Four-Way optocoupler Isolation PLC Level Voltage Conversion Board 1.8V 3.3V 5V 12V 24V Unidirectional Transmission (24V to 24V)
Asin: B09931WSFZ | Ean: 0739227473594 | UPC: 739227473594
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.The Limit Switching Frequency Is 20Khz..
Widely Used, It Can Be Used For Signal Isolation, Level Conversion Between Mcu, Plc And Other Signals, Pnp, Npn Signal To Npn Signal, Signal Level Voltage Conversion And Other Purposes..
Adopt Brand New Original Optocoupler..
Features
- NPN Output Four-Way optocoupler Isolation PLC Level Voltage Conversion Board 1.8V 3.3V 5V 12V 24V Unidirectional Transmission
- Adopt brand new original optocoupler.
- The limit switching frequency is 20KHZ.
- Widely used, it can be used for signal isolation, level conversion between MCU, PLC and other signals, PNP, NPN signal to NPN signal, signal level voltage conversion and other purposes.
- See more on Amazon...
Brand: Reland Sun | Manufacturer: Reland Sun
See On Amazon Similar To NPN Output FourWay optocoupler Isolation
#1
NOYITO PC817 4-Channel Optocoupler Isolation Board Voltage Converter Adapter Module 3.6-30V Driver Photoelectric Isolated Module
Asin: B07GMHLL2M | Model: NOPC8174C | PartNumber: NOPC8174C | Ean: 0667797752569 | UPC: 667797752569
It Can Realize 3.3V Or 5V To Control The Interface Of 3.6-30V Voltage . After The Control Terminal Is Turned On, The Controlled Terminal Will Also Be Turned On..
【8-Channel Optocoupler Isolation Board Asin ： B09rgtbdkj 】 Noyito Pc817 4-Channel Optocoupler Isolation Board User Manual Https://1Drv.Ms/U/S!Alzqucoyzqhkgt98ibtg22r8w5eq?E=Vfkbrk.
Photoelectric Isolation Has Strong Anti-Interference Ability. It Can Drive High-Power Triodes, Mos Tubes And Other Applications That Require High-Voltage Driving, And Can Also Directly Drive Low-Power 24V Relays.If It Is A Pulse Signal, Please Note That The Limit Of 817 Is 4Khz Or Less. If The Control Signal Is Greater Than 4Khz, Please Do Not Use This Module, It Will Not Work Properly..
Drive Terminal Signal Voltage: 3.6-24V. Output Terminal Voltage Range: 3.6-30V (Output Current Depends On The Specific Situation But The Maximum Does Not Exceed 10Ma, The Total Power Is Constant, The Voltage And Current Are Inversely Proportional).
Features
- This module is used when it comes to the need for isolation control and voltage conversion.
- Drive terminal signal voltage: 3.6-24V. Output terminal voltage range: 3.6-30V (output current depends on the specific situation but the maximum does not exceed 10MA, the total power is constant, the voltage and current are inversely proportional)
- It can realize 3.3V or 5V to control the interface of 3.6-30V voltage . After the control terminal is turned on, the controlled terminal will also be turned on.
- Photoelectric isolation has strong anti-interference ability. It can drive high-power triodes, MOS tubes and other applications that require high-voltage driving, and can also directly drive low-power 24V relays.If it is a pulse signal, please note that the limit of 817 is 4KHZ or less. If the control signal is greater than 4KHZ, please do not use this module, it will not work properly.
- 8-Channel Optocoupler Isolation Board ASIN B09RGTBDKJ NOYITO PC817 4-Channel Optocoupler Isolation Board User Manual https://1drv.ms/u/s!AlzQUCOyZQhKgT98ibtG22R8W5eQ?e=VfKbrK
- See more on Amazon...
Brand: NOYITO | Manufacturer: NOYITO
Dimensions: 0.39 x 0.71 x 1.50 Inches | Weight: 0.03 Pounds
Warranty: Manufacturer's One-year After-sale Warranty
See On Amazon #2
NOYITO PC817 8-Channel Optocoupler Isolation Board Voltage Converter Adapter Module 3.6-30V Driver Photoelectric Isolated Module
Asin: B09RGTBDKJ | Model: NOPC8178C | PartNumber: NOPC8178C
It Can Realize 3.3V Or 5V To Control The Interface Of 3.6-30V Voltage . After The Control Terminal Is Turned On, The Controlled Terminal Will Also Be Turned On..
If It Is A Pulse Signal, Please Note That The Limit Of 817 Is 4Khz Or Less. If The Control Signal Is Greater Than 4Khz, Please Do Not Use This Module, It Will Not Work Properly..
Photoelectric Isolation Has Strong Anti-Interference Ability. It Can Drive High-Power Triodes, Mos Tubes And Other Applications That Require High-Voltage Driving, And Can Also Directly Drive Low-Power 24V Relays..
Drive Terminal Signal Voltage: 3.6-24V. Output Terminal Voltage Range: 3.6-30V (Output Current Depends On The Specific Situation But The Maximum Does Not Exceed 10Ma, The Total Power Is Constant, The Voltage And Current Are Inversely Proportional).
Features
- This module is used when it comes to the need for isolation control and voltage conversion.
- Drive terminal signal voltage: 3.6-24V. Output terminal voltage range: 3.6-30V (output current depends on the specific situation but the maximum does not exceed 10MA, the total power is constant, the voltage and current are inversely proportional)
- It can realize 3.3V or 5V to control the interface of 3.6-30V voltage . After the control terminal is turned on, the controlled terminal will also be turned on.
- Photoelectric isolation has strong anti-interference ability. It can drive high-power triodes, MOS tubes and other applications that require high-voltage driving, and can also directly drive low-power 24V relays.
- If it is a pulse signal, please note that the limit of 817 is 4KHZ or less. If the control signal is greater than 4KHZ, please do not use this module, it will not work properly.
- See more on Amazon...
Brand: NOYITO | Manufacturer: NOYITO
Dimensions: 0.20 x 3.31 x 1.50 inches | Weight: 0.07 Pounds
Warranty: Manufacturer's One-year After-sale Warranty
See On Amazon #3
V BESTLIFE PC817 4 Channel Optocoupler Isolation Board Voltage Converter Adapter Module 3.6-30V Driver Photoelectric Isolated Module PC 817
Asin: B08NSQ3ZGQ | Ean: 9586538749693
Photoelectric Isolation Has Strong Anti-Interference Ability. Can Drive Big Behindpower Triodes, Mos Tubes, Etc., Where High Voltage Driving Is Required, Can Also Directly Drive Low Power 24V Relays..
Through The Jumper Cap Can Achieve Whether The Output Is High Potential Output Or Low Output.The 4Th And 817 On The Board Are Independent, Which Can Realize Simultaneous Control Of Different Voltages, Etc..
If It Is A Pulse Signal, Please Note That The Limit Of 817 Is Below 4Khz. If The Control Signal Is Greater Than 4Khz, Please Do Not Use This Module, It Will Not Work Properly..
It Can Realize 3.3V Or 5V To Control The Interface Of 3.6--24V Voltage Level. After The Control Terminal Is Turned On, The Controlled Terminal Will Also Be Turned On..
Features
- This module is used when the actual operation requires isolation control and voltage conversion.
- It can realize 3.3V or 5V to control the interface of 3.6--24V voltage level. After the control terminal is turned on, the controlled terminal will also be turned on.
- Photoelectric isolation has strong anti-interference ability. Can drive big behindPower triodes, MOS tubes, etc., where high voltage driving is required, can also directly drive low power 24V relays.
- If it is a pulse signal, please note that the limit of 817 is below 4KHZ. If the control signal is greater than 4KHZ, please do not use this module, it will not work properly.
- Through the jumper cap can achieve whether the output is high potential output or low output.The 4th and 817 on the board are independent, which can realize simultaneous control of different voltages, etc.
- See more on Amazon...
Brand: V BESTLIFE | Manufacturer: V BESTLIFE
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.03 Pounds
See On Amazon #4
Comimark 2Pcs Tlp281 4-Channel Opto-Isolator Ic Module for Expansion Board C4K2
Asin: B07YHZSZRM | Model: LY564 | PartNumber: LY564 | Ean: 0657835730482 | UPC: 657835730482
Hgnd Connection Is Control Of High Voltage Anode.
We Highly Appreciate All Customers Opinions To Improve The Selling, Also If Anything You Unsatisfied, Please Contact Us For Probable Best Solution..
Package Included: 2 X 4-Channel Module Expansion Board (If The Number Of Products Received Is Incorrect, Please Contact Us . We Will Refund Or Give You A Replacement).
Output: Hvcc: Connection Is Control Of High Voltage Anode,.
Features
- Output: OUT1 / OUT2 / OUT3 / OUT4
- Output: HVCC: Connection is control of high voltage anode,
- HGND connection is control of high voltage anode
- Package Included: 2 x 4-Channel Module Expansion Board (If the number of products received is incorrect, please contact us . we will refund or give you a replacement)
- We highly appreciate all customers opinions to improve the selling, also if anything you unsatisfied, please contact us for probable best solution.
- See more on Amazon...
Brand: Comimark | Manufacturer: Comimark
See On Amazon #5
PC817 4-Channel Voltage Converter Module Optocoupler Isolation Driving Module
Asin: B081XLK1H6 | Model: TG206 | PartNumber: TG206 | Ean: 0696629128999 | UPC: 696629128999
3.Jumper Cap Can Achieve Output Port Is High Potential Or Pull Down Output.
5.Using 4-Way 817 Optocoupler, To Achieve The Control Signal And The Control Signal Isolation, You Can Directly Use The Microcontroller Or Other Devices Io Port To Achieve Voltage Isolation Control, You Can Achieve A Small Voltage Control, The Control Side Can Be An External Transistor Mos Tube Or Different Voltage Levels Of The Device Interface.
4.Onboard 4-Channel 817 Are Independent:Can Achieve Different Voltage Control At Then Same Time.
2.Output Port Voltage Port:3.6-30V.
Features
- 1.Driving Port Signal Voltage:3.6-24V
- 2.Output Port Voltage Port:3.6-30V
- 3.Jumper Cap Can Achieve Output Port Is High POtential Or Pull Down Output
- 4.Onboard 4-Channel 817 Are Independent:can achieve different voltage control at then same time
- 5.Using 4-way 817 optocoupler, to achieve the control signal and the control signal isolation, you can directly use the microcontroller or other devices IO port to achieve voltage isolation control, you can achieve a small voltage control, the control side can be an external transistor MOS tube or different voltage levels Of the device interface
- See more on Amazon...
Brand: Gump's grocery | Manufacturer: Gump's grocery
See On Amazon #6
DAOKI 1 Pcs PC817 3.3V-30V 2 Channel optocoupler Isolation Board Voltage Converter Adapter Module Transfer Control Module with LJ12A34Z/BX for Adruino uno
Asin: B091TRC8B8 | Model: JK-US-014 | PartNumber: JK-US-014
【Application Range】：The Module Can Be Used As Long As Isolation Control And Voltage Conversion Are Required, And The Application Range Is Wide..
【Features】：Using 817 Optocoupler, You Can Directly Use The Io Port Of A Microcontroller Or Other Device To Achieve Voltage Isolation Control, And Can Achieve Low Voltage Control. The Control Terminal Can Be Connected To An External Transistor Mos Tube Or Device Interface With Different Voltage Levels.
【Regarding Pulse Signal】：If It Is A Pulse Signal, Please Note That The Limit Of 817 Is 4Khz Or Less. If The Control Signal Is Greater Than 4Khz, Please Do Not Use This Module, Otherwise It Will Not Work Normally..
【Anti-Interference Ability And Drive】：The Module's Photoelectric Isolation Has Strong Anti-Interference Ability. It Can Drive High-Power Transistors, Mos Tubes And Other Applications That Require High-Voltage Drive, And Can Directly Drive Low-Power 24V Relays..
Features
- Voltage range Drive terminal signal voltage: 3.6-24V. Output terminal voltage range: 3.6-30V (output current depends on the specific situation, but the maximum does not exceed 10MA, the total power is constant, and the voltage is inversely proportional to the current)
- Anti-interference ability and drive The module's photoelectric isolation has strong anti-interference ability. It can drive high-power transistors, MOS tubes and other applications that require high-voltage drive, and can directly drive low-power 24V relays.
- Application range The module can be used as long as isolation control and voltage conversion are required, and the application range is wide.
- Regarding pulse signal If it is a pulse signal, please note that the limit of 817 is 4KHZ or less. If the control signal is greater than 4KHZ, please do not use this module, otherwise it will not work normally.
- Features Using 817 optocoupler, you can directly use the IO port of a microcontroller or other device to achieve voltage isolation control, and can achieve low voltage control. The control terminal can be connected to an external transistor MOS tube or device interface with different voltage levels
- See more on Amazon...
Brand: DAOKI | Manufacturer: DAOKI
Weight: 0.22 Pounds
See On Amazon #7
PC817 4 Channel Optocoupler Isolation Board Voltage Converter Adapter Module 3.6-30V Driver Photoelectric Isolated Module PC 817
Asin: B0C5QSFHQZ
Features
- PC817 4 Channel Optocoupler Isolation Board Voltage Converter Adapter Module 3.6-30V Driver Photoelectric Isolated Module PC 817
- See more on Amazon...
Brand: Generic | Manufacturer: Generic
See On Amazon #8
PC817 2 4 8 Channel Optocoupler Isolation Board Voltage Converter Adapter Module 3.6-30V Driver Photoelectric Isolated Module-4 Way
Asin: B09L56SC45 | Ean: 6911451018817
3.Jumper Cap Can Achieve Output Port Is High Potential Or Pull Down Output.
4.Onboard 4-Channel 817 Are Independent:Can Achieve Different Voltage Control At Then Same Time.
2.Output Port Voltage Port:3.6-30V.
Features
- 1.Driving Port Signal Voltage:3.6-24V
- 2.Output Port Voltage Port:3.6-30V
- 3.Jumper Cap Can Achieve Output Port Is High POtential Or Pull Down Output
- 4.Onboard 4-Channel 817 Are Independent:can achieve different voltage control at then same time
- See more on Amazon...
Brand: CHJIENJUJIDZ | Manufacturer: CHJIENJUJIDZ
See On Amazon #9
ANMBEST 2PCS 4 Channel 5V Relay Module with Optocoupler High or Low Level Trigger Expansion Board for Raspberry Pi Arduino
Asin: B08PP8HXVD | Model: ANMBEST_MD314-319 | PartNumber: ANMBEST_MD314-319 | Ean: 7903265708922
Reliable: Fault-Tolerant Design, Even If The Control Line Breaks, The Relay Will Not Move; With Optical Coupling Isolation, Triggering More Reliable, More Stable..
High/Low Level Trigger Can Be Selected By Jumper. Very Versatile, You Can Reverse The Input Logic With The Jumper..
Easy To Install: Equipped With Screwed Terminal Plate And Fixed Bolt Holes(Diameter: 3.1 Mm) On Both Sides For Easy Installation..
Equipped With High-Current Relay, Maximum Load: Ac250v 10A, 15A 125Vac, Dc30v 10A; Trigger Current Of Opto-Isolator: 5Ma..
Features
- It is 4 Channel Isolated 5V 10A Relay Module, each relay can individually switch on/off by an opto-isolated digital input, Standard interface can be directly connected with microcontrollers and be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, DSP, etc., very convenient.
- Equipped with high-current relay, maximum load: AC250V 10A, 15A 125VAC, DC30V 10A; Trigger current of opto-isolator: 5mA.
- RELIABLE: Fault-tolerant design, even if the control line breaks, the relay will not move; With optical coupling isolation, triggering more reliable, more stable.
- EASY to INSTALL: Equipped with screwed terminal plate and fixed bolt holes(diameter: 3.1 mm) on both sides for easy installation.
- High/Low level trigger can be selected by jumper. Very versatile, you can reverse the input logic with the jumper.
- See more on Amazon...
Brand: ANMBEST | Manufacturer: ANMBEST
See On Amazon #10
BOJACK PC817 OPTOCOUPLER DIP Installation PC817C 2.54 mm Pitch 4-pin DIP-4 (Pack of 50 pcs)
Asin: B08CXRHDHP | Ean: 0759838089656 | UPC: 759838089656
Needle Distance: 2.54Mm.
Application: Pc817 Photocoupler Is Widely Used In Computer Terminals, Scr System Equipment, Measuring Instruments, Photocopiers, Automatic Ticketing, Household Appliances.
Package Quantity: 50 Pieces, Packed In A Durable And Resealable Plastic Storage Box..
Number Of Pins: 4.
Features
- Photocoupler output type: phototransistor
- Number of pins: 4
- Needle distance: 2.54mm
- Package quantity: 50 pieces, packed in a durable and resealable plastic storage box.
- Application: PC817 photocoupler is widely used in computer terminals, SCR system equipment, measuring instruments, photocopiers, automatic ticketing, household appliances
- See more on Amazon...
Brand: BOJACK | Manufacturer: BOJACK
See On Amazon #11
5 PCS Optocoupler Isolation Board, Icstation DC 12V Optocoupler Isolation Module EL817 1 Channel Opto PNP NPN Signal Converter, Isolator High-Level Trigger 80KHz
Asin: B01L1OI1HC | Model: EL817 1CH Optocoupler Isolation Board | PartNumber: EL817 1CH Optocoupler Isolation Board
【Level Converter】Opto-Isolators Can Be Used As Level Converters (Npn-Pnp, Pnp-Npn), Signal Input To Mcu In Isolation, Or Mcu-Controlled Device Output In Isolation..
【Functional Application】Devices For Microprocessor Input/Output Switching, Dc/Ac Power Control, Communications Equipment Protection, And Power Supply Regulation..
【Control Transformer】Optocoupler Isolation Board Provide Isolation Between Low And High-Voltage Circuits When Used With Other Electronic Devices..
【Signal Voltage】Positive Phase Amplification With High-Level Trigger. Output Equals Input..
Features
- Relay Switch Module 5pcs 1-channel photocoupler isolator with stable performance, triggered by DC 12V and 1mA current.
- Signal Voltage Positive phase amplification with high-level trigger. Output equals input.
- Level Converter Opto-isolators can be used as level converters (NPN-PNP, PNP-NPN), signal input to MCU in isolation, or MCU-controlled device output in isolation.
- Control Transformer Optocoupler isolation board provide isolation between low and high-voltage circuits when used with other electronic devices.
- Functional Application Devices for microprocessor Input/Output switching, DC/AC power control, communications equipment protection, and power supply regulation.
- See more on Amazon...
Brand: IS | Manufacturer: Icstation
Dimensions: 0.55 x 1.10 x 0.59 inches | Weight: 0.02 Pounds
See On Amazon #12
NOYITO 1-Channel PC817 Optocoupler Isolation Module Optoelectronic Isolator Signal Isolation and Anti-Interference 3-5V 12V 24V (Pack of 2) (3-5V)
Asin: B0B5373L4P
The Module Can Also Be Used For Current Amplification. For Example, When The Output Current Of The Microcontroller Is Too Small To Drive Certain Circuits, This Module Can Be Used For Amplification..
Output Signal Voltage: Wide Voltage, Suitable For Dc1.8 - 24V..
Input Signal Voltage: 3-5V / 12V / 24V (Optional)..
The Module Can Be Used For High-Voltage Detection. For Example, If The Output Signal Level Of A Sensor Is 12V, And The Voltage Of The Microcontroller Is 5V, This Module Can Be Used For Isolation Detection..
Features
- NOYITO 1-Channel PC817 Optocoupler Isolation module adopts 5.0 pitch screw terminals for easy wiring . The module can play the role of isolation when the output level of the single-chip microcomputer drives the inductive devices such as motors and motors, and protect part of the circuit of the single-chip microcomputer against interference
- The module can be used for high-voltage detection. For example, if the output signal level of a sensor is 12V, and the voltage of the microcontroller is 5V, this module can be used for isolation detection.
- The module can also be used for current amplification. For example, when the output current of the microcontroller is too small to drive certain circuits, this module can be used for amplification.
- Input signal voltage: 3-5V / 12V / 24V (optional).
- Output signal voltage: wide voltage, suitable for DC1.8 - 24V.
- See more on Amazon...
Brand: NOYITO | Manufacturer: NOYITO
Dimensions: 0.47 x 2.60 x 0.65 inches
Warranty: One Year
See On Amazon #13
Gikfun OPTOCOUPLER DIP-4 PC817C PC817 for Arduino DIY (Pack of 20pcs) AE1143
Asin: B01JG8EJVW | Model: LYSB01GYH74O2-ELECTRNCS | PartNumber: LYSB01GYH74O2-ELECTRNCS | Ean: 0728821641362, 0634894436395 | UPC: 634894436395, 728821641362
Pin Pitch: 2.54Mm.
Used Widely In Computer Terminals, System Appliances, Measuring Instruments, Registers, Copiers, Automatic Vending Machines Etc.
Optocoupler Output Type: Optical Transistor.
Number Of Pin: 4.
Features
- Gikfun Packing 20pcs OPTOCOUPLER DIP-4 PC817C PC817
- Number of Pin: 4
- Pin Pitch: 2.54mm
- Optocoupler Output Type: optical transistor
- Used widely in computer terminals, system appliances, measuring instruments, registers, copiers, automatic vending machines etc
- See more on Amazon...
Brand: Gikfun | Manufacturer: Esooho
Dimensions: 0.20 x 5.00 x 3.50 Inches
See On Amazon #14
ALLECIN PC817 PC817C Transistor Output Optocoupler DIP-4 2.54mm Pitch for Arduino DIY (Pack of 50pcs)
Asin: B0CBKK6T3D | Model: PC817 | PartNumber: PC817
Features: High Isolation Voltage Between Input And Output & Double Transfer Mold Package..
Humanized Packaging For Easy Storage And Use. ### Please Confirm The Data Before Purchasing..
Widely Application: Computer Terminals & Scr System Equipment & Measuring Instruments & Photocopiers & Automatic Ticketing & Household Appliances..
Number Of Pin: 4; Pin Pitch: 2.54Mm..
Features
- ALLECIN PC817 is a Single-channel dual inline package photocoupler- Perfectly suitable for variety electronic experiments.
- Number of Pin: 4; Pin Pitch: 2.54mm.
- Features: High isolation voltage between input and output & Double transfer mold package.
- Widely Application: computer terminals & SCR system equipment & measuring instruments & photocopiers & automatic ticketing & household appliances.
- Humanized packaging for easy storage and use. ### Please confirm the data before purchasing.
- See more on Amazon...
Brand: ALLECIN | Manufacturer: ALLECIN
See On Amazon #15
3PCS PC817 4 Channel Optocoupler Isolation Board Voltage Converter 3.6-30V Driver Photoelectric Isolated Module
Asin: B0B15FTBPF | Model: 13490-1 | PartNumber: 13490-1 | Ean: 0701715532465 | UPC: 701715532465
4 Way 817 Optocoupler To Achieve The Control Signal And The Control Signal Isolation, You Can Directly Use The Microcontroller Or Other Devices Io Port To Achieve Voltage Isolation Control, You Can Achieve A Small Voltage Control, The Control Side Can Be An External Transistor Mos Tube Or Different Voltage Levels Of The Device Interface.
If It Is A Pulse Signal, Please Note That The Limit Of 817 Is Below 3Khz. If The Control Signal Is Greater Than 3Khz, Please Do Not Use This Module, It Will Not Work Properly..
Pc817 Module Jumper Cap Can Achieve Output Port Is High Potential Or Pull Down Output.
4-Way 817 Optocoupler Driving Port Signal Voltage:3.3-24V; Output Voltage Range: 3.6-30V(The Output Current Depends On The Specific Situation But Not Over 10Ma. When The Total Power Is Fixed, The Voltage And Current Are Inversely Proportional).
Features
- Onboard 4 channel 817 are independent: can achieve different voltage control at then same time
- 4-way 817 optocoupler driving port signal voltage:3.3-24V; Output voltage range: 3.6-30V(The output current depends on the specific situation but not over 10MA. When the total power is fixed, the voltage and current are inversely proportional)
- 4 way 817 optocoupler to achieve the control signal and the control signal isolation, you can directly use the microcontroller or other devices IO port to achieve voltage isolation control, you can achieve a small voltage control, the control side can be an external transistor MOS tube or different voltage levels Of the device interface
- PC817 module jumper cap can achieve output port is high potential or pull down output
- If it is a pulse signal, please note that the limit of 817 is below 3KHZ. If the control signal is greater than 3KHZ, please do not use this module, it will not work properly.
- See more on Amazon...
Brand: Shutao | Manufacturer: Shutao
See On Amazon #16
Ximimark 50Pcs PC817C Optocoupler IC Chip DIP-4 Transistor Output Optocoupler Optical Isolator
Asin: B07L75XH51 | Ean: 0657835637316 | UPC: 657835637316
Signal Transmission Between Circuits Of Different Potentials And Impedances..
Registers, Copiers, Automatic Vending Machines,Electric Home Appliances, Such As Fan Heaters, Etc..
System Appliances, Measuring Instruments..
High Isolation Voltage Between Input And Output ( Viso=5000V Rms ).
Features
- Current transfer ratio(CTR: MIN. 50% at I F = 5mA ,VCE=5V)
- High isolation voltage between input and output ( Viso=5000V rms )
- Signal transmission between circuits of different potentials and impedances.
- System appliances, measuring instruments.
- Registers, copiers, automatic vending machines,Electric home appliances, such as fan heaters, etc.
- See more on Amazon...
Brand: Ximimark | Manufacturer: Ximimark
See On Amazon #17
HiLetgo 3pcs TLP281 Optocoupler Isolation Board Optical Coupler Isolation Module 4 Channel Optical Coupler Isolation Module High/Low Level Expansion Board
Asin: B01MRR4K6Z
Connecting Digital Systems (Like A 5V Microcontroller) To A High-Voltage Or Noisy System.
A Normal Led Opto-Isolator Will Invert The Logic Of A Signal.
A Higher Voltage Than The Ttl Logic On The (3.3V Or 5V) Micro.
Pcb Size: 25Mm X 26Mm.
Features
- TLP281 4 Channel Optical Coupler Isolation Module
- PCB Size: 25mm x 26mm
- Connecting digital systems (like a 5V microcontroller) to a high-voltage or noisy system
- A higher voltage than the TTL logic on the (3.3V or 5V) micro
- A normal LED opto-isolator will invert the logic of a signal
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #18
Major Brands 4N35 Optocoupler, DC Input 1 Channel Trans with Base DC Output, 100% Transfer Ratio, 6-Pin, PDIP, 1.2V, 4 mm H x 7 mm W x 7.62 mm L (Pack of 20)
Asin: B00B88AOS6 | Model: 4N35 | PartNumber: 4N35
1.5 Volts.
Power: 200Mw.
6 Pin.
Brand: Major Brands | Manufacturer: Major Brands
Weight: 0.02 Pounds
See On Amazon #19
DONGKER Optocoupler Isolation Board,DC 3.3V 5V PNP NPN 8-Channel Signal Converter Opto Voltage Isolation Module
Asin: B08LYQQ7X6 | Model: 1 | PartNumber: 1 | Ean: 0770264202464 | UPC: 770264202464
Npn / Pnp (Low/High Level) Signal Output..
Dc 1.8V-24V Load Voltage..
Support Dc 3.3V~5V Input..
8-Channel Input And Output..
Features
- Optocoupler isolation control.
- 8-Channel input and output.
- NPN / PNP (Low/High level) signal output.
- Support DC 3.3V~5V Input.
- DC 1.8V-24V load voltage.
- See more on Amazon...
Brand: DONGKER | Manufacturer: DONGKER
See On Amazon #20
Alinan 4pcs 4CH Optocoupler PC817 4 Channel Isolation Board Voltage Converter Adapter Module 3.6-30V Driver Photoelectric Isolated Module
Asin: B09ZH6D7CQ | Model: Alinan | PartNumber: Alinan | Ean: 0701715514935 | UPC: 701715514935
★Photoelectric Isolation Has Strong Anti-Interference Ability. Can Drive Big Behindpower Triodes, Mos Tubes, Etc., Where High Voltage Driving Is Required, Can Also Directly Drive Low Power 24V Relays..
★Through The Jumper Cap Can Achieve Whether The Output Is High Potential Output Or Low Output.The 4Th And 817 On The Board Are Independent, Which Can Realize Simultaneous Control Of Different Voltages, Etc..
★If It Is A Pulse Signal, Please Note That The Limit Of 817 Is Below 4Khz. If The Control Signal Is Greater Than 4Khz, Please Do Not Use This Module, It Will Not Work Properly..
★Can Realize 3.3V Or 5V To Control The Interface Of 3.6-30V Voltage . After The Control Terminal Is Turned On, The Controlled Terminal Will Also Be Turned On..
Features
- Driving Port Signal Voltage: 3.6-24V; Output Port Voltage Port: 3.6-30V
- Can realize 3.3V or 5V to control the interface of 3.6-30V voltage . After the control terminal is turned on, the controlled terminal will also be turned on.
- Photoelectric isolation has strong anti-interference ability. Can drive big behindPower triodes, MOS tubes, etc., where high voltage driving is required, can also directly drive low power 24V relays.
- If it is a pulse signal, please note that the limit of 817 is below 4KHZ. If the control signal is greater than 4KHZ, please do not use this module, it will not work properly.
- Through the jumper cap can achieve whether the output is high potential output or low output.The 4th and 817 on the board are independent, which can realize simultaneous control of different voltages, etc.
- See more on Amazon...
Brand: Alinan | Manufacturer: Alinan
See On Amazon
Looking For Something Else?
Search