uxcell High Speed Steel Straight Shank Twist Drill Bit Fully Ground Titanium Coated 4.1mm Drill Diameter 75mm Total Length 36mm Drill Bit Length 2 Pcs
Asin: B099J9S7LW | Model: a21013000ux0291 | PartNumber: a21013000ux0291
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.[Professional And Diy Use]- Suitable For Hardened Materials And Hard Metals, Such As Cast Iron, Hard Plastics, And Also Suitable For Soft Materials. When It Cannot Penetrate, Try To Adjust The Rpm..
[Note]- Please Keep Cool And Gentle Using, The Working Life Of The Twist Drill Bits Can Be Largely Prolonged By Proper Usage.
[Twisted Design]- With A 120° Angle Point And Twist Design, It Can Increase The Cutting Speed Through Automatic Centering; Avoid Displacement During The Work Process, And At The Same Time Remove Debris And Particles Faster And Easier. The Straight Shank Can Be Firmly Fixed And Accurately Centered, Suitable For Standard Drill Chucks And Conventional Round Chucks..
[Strength And Hardness]- Made Of High-Speed 6542 Steel, Rock Wall Hardness Grade Hrc 63-66. With Titanium Coating Treatment, It Is Reliable And Durable..
Features
- [Package content]- 2 Pcs 4.1mm Drill Dia High Speed Steel straight shank twist drills.
- [Strength and Hardness]- Made of high-speed 6542 steel, rock wall hardness grade HRC 63-66. With titanium coating treatment, it is reliable and durable.
- [Professional and DIY use]- Suitable for hardened materials and hard metals, such as cast iron, hard plastics, and also suitable for soft materials. When it cannot penetrate, try to adjust the RPM.
- [Twisted Design]- With a 120 angle point and twist design, it can increase the cutting speed through automatic centering; avoid displacement during the work process, and at the same time remove debris and particles faster and easier. The straight shank can be firmly fixed and accurately centered, suitable for standard drill chucks and conventional round chucks.
- [Note]- Please keep cool and gentle using, the working life of the twist drill bits can be largely prolonged by proper usage
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon Similar To uxcell High Speed Steel Straight
#1
uxcell Straight Shank Twist Drill Bits 10mm High Speed Steel 4341 with 10mm Shank for Stainless Steel Alloy Metal Plastic Wood
Asin: B082CWWN3X | Model: a19102500ux0136 | PartNumber: a19102500ux0136
Sharp Spiral Flutes: Provide Neat And Smooth Cuts. High Cutting Edge Strength, Fast Cutting Speed. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Clamping Stable Round Shank Design, Not Easy To Shake, Tight Clamping Without Slipping.
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant.
High Speed Steel Tool: High-Speed Steel Straight Shank Tool Is Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance.
Features
- Features: Cutting Edge Diameter : 10mm / 0.39"; Shank Diameter : 10mm / 0.39"; Cutting Edge Length: 90mm / 3.54"; Total Length : 130mm / 5.12"; Cutting Direction: Right Hand
- High Speed Steel Tool: High-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Sharp Spiral Flutes: Provide neat and smooth cuts. High cutting edge strength, fast cutting speed. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Clamping stable round shank design, not easy to shake, tight clamping without slipping
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #2
uxcell Reduced Shank Twist Drill Bits 17mm High Speed Steel 4341 with 10mm (3/8") Shank for Stainless Steel Alloy Metal Plastic Wood
Asin: B082DC1D1D | Model: a19102500ux0069 | PartNumber: a19102500ux0069
Reduced Shank: Reduced Shank Drill Expands The Size Range Capacity Of A Portable Drill Chuck. Common Flute And Overall Length For Minimal Adjustment During Tool Changes. Sharp And Spiral Cutting Edge Provides Neat And Smooth Cuts..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Tri-Flat On The Shank Of Drills Are Constructed For Tighter Chucking Maximizing Security For Precise Holes..
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
High Speed Steel Tool: The Twist Drill Bits Are Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance. High Cutting Edge Strength, Fast Cutting Speed..
Features
- Features: Cutting Edge Diameter : 17mm / 0.67"; Shank Diameter : 10mm / 3/8"; Cutting Edge Length: 75mm / 2.95"; Total Length : 150mm / 6.0"; Cutting Direction: Right Hand
- High Speed Steel Tool: The twist drill bits are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. High cutting edge strength, fast cutting speed.
- Reduced Shank: Reduced shank drill expands the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Sharp and spiral cutting edge provides neat and smooth cuts.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Tri-flat on the shank of drills are constructed for tighter chucking maximizing security for precise holes.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #3
uxcell Metric Machine Tap M10 x 1.25mm H2 High Speed Steel 3 Straight Flutes Screw Tapping Threading Machinist Repair DIY Tool
Asin: B07KSWJYN1 | Model: a18102400ux0296 | PartNumber: a18102400ux0296
Suitable For Processing Through Holes Or Shallow Holes On Most Metals, Iron Plate, Copper, Zinc, Alloy Steel, Abrasive Steel, A3 Steel, Stainless Steel, Etc.. Add Appropriate Tapping Oil For Higher Quality Internal Threads And More Durable Taps..
Machine Taps Used With Drilling Machines, Tapping Machines, Automatic Machines, Machining Centers, Cnc, Milling Machines, Not Recommended For Hand And Electric Drill Tapping. Recommended Feed Speed: Ordinary Steel: 6-15M/Min; Harder Steel Material: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
Straight Flute Design, Rapid Downward Chip Removal For Efficient Threading, Clear Threads Without Burrs, Right Hand Tapping Direction. Good For Processing Through Holes Or Shallow Holes.
The Thread Tap Can Make New Threads Or Re-Thread Damaged Or Jammed Threads. Uncoated Taps Feature Just The Base Substrate Without Any Additional Coatings, And Fit A Wide Range Of Applications..
Features
- Thread Size: M10 x 1.25mm. High-speed steel metric taps are with high hardness and toughness for wear resistance, well suited for general purpose applications.
- The thread tap can make new threads or re-thread damaged or jammed threads. Uncoated taps feature just the base substrate without any additional coatings, and fit a wide range of applications.
- Suitable for processing through holes or shallow holes on most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Add appropriate tapping oil for higher quality internal threads and more durable taps.
- Straight flute design, rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Good for processing through holes or shallow holes
- Machine taps used with drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min; harder steel material: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 3.54 x 0.39 Inches | Weight: 0.00 Pounds
See On Amazon #4
uxcell M5 x 0.8 Straight Flute Thread Tap and 4.2mm Twist Drill Bit Set, Metric Titanium Plated 6542 High Speed Steel Machine Screw Thread Tap Threading Drilling Tool
Asin: B09TVJ2BB5 | Model: a22010500ux0472 | PartNumber: a22010500ux0472
Twist Drill Bit: Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting And No Glitches. Titanium Coating Provides Excellent Corrosion Resistance And Improves Wear Resistance..
Tips Of Drill Bit: Suitable Lubricant Is Conducive To Cutting Or Cooling, Making Cutting Easier, Improving Smoothness And Dimensional Accuracy. Select An Appropriate Feed Rate And Cutting Speed To Improve The Tool Life..
Usage Of Tap: Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps. Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection..
Straight Flute Tap: Straight Flute Design, Downward Chip Removal. Right Hand Thread Cutting, Fast Tapping With Accuracy. Suitable For Processing Through Holes. For Drilling And Tapping Aluminum, Die Steel, Stainless Steel, Bronze, Hard Plastics.
Features
- Tap and Drill Bit: Tap thread size: M5 x 0.8, drill bit diameter: 4.2mm / 0.17". High-speed steel tool has high hardness and toughness for wear resistance.
- Straight Flute Tap: Straight flute design, downward chip removal. Right hand thread cutting, fast tapping with accuracy. Suitable for processing through holes. For drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics
- Twist Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. Titanium coating provides excellent corrosion resistance and improves wear resistance.
- Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection.
- Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #5
uxcell Metric Machine Tap M3 x 0.5mm H2 High Speed Steel 3 Straight Flutes Screw Tapping Threading Machinist Repair DIY Tool 2pcs
Asin: B07KT1VM7G | Model: a18102400ux0267 | PartNumber: a18102400ux0267
Suitable For Processing Through Holes Or Shallow Holes On Most Metals, Iron Plate, Copper, Zinc, Alloy Steel, Abrasive Steel, A3 Steel, Stainless Steel, Etc.. Add Appropriate Tapping Oil For Higher Quality Internal Threads And More Durable Taps..
Machine Taps Used With Drilling Machines, Tapping Machines, Automatic Machines, Machining Centers, Cnc, Milling Machines, Not Recommended For Hand And Electric Drill Tapping. Recommended Feed Speed: Ordinary Steel: 6-15M/Min; Harder Steel Material: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
Standard Metric Thread Design, Clear And Tidy, Provide Rapid Chip Removal For Efficient Threading. Straight Flute Design, Right Hand Tapping Direction. The Mini Metric Taps Are Mainly Used For Clocks, Watches, Low Hardness Wood And Soft Metal Hole Processing..
The Thread Tap Can Make New Threads Or Re-Thread Damaged Or Jammed Threads. Uncoated Taps Feature Just The Base Substrate Without Any Additional Coatings, And Fit A Wide Range Of Applications..
Features
- Thread Size: M3 x 0.5mm. High-speed steel metric taps are with high hardness and toughness for wear resistance, well suited for general purpose applications.
- The thread tap can make new threads or re-thread damaged or jammed threads. Uncoated taps feature just the base substrate without any additional coatings, and fit a wide range of applications.
- Suitable for processing through holes or shallow holes on most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Add appropriate tapping oil for higher quality internal threads and more durable taps.
- Standard metric thread design, clear and tidy, provide rapid chip removal for efficient threading. Straight flute design, right hand tapping direction. The mini metric taps are mainly used for clocks, watches, low hardness wood and soft metal hole processing.
- Machine taps used with drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min; harder steel material: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 4.72 x 1.97 inches
See On Amazon #6
uxcell Step Drill Bit HSS 3mm to 13mm 11 Sizes Titanium Coated Straight Flutes Hex Shank for Metal Wood Plastic
Asin: B07T33RCCY | Model: a19042700ux0276 | PartNumber: a19042700ux0276
It Is Great For Drilling Holes For Iron, Metal, Aluminum, Copper, Wood, Plastic, Pvc Board And Many Other Types Of Sheets..
Note: High Temperature Will Affect The Working Life, Please Use Coolant While Drilling On Metals To Ensure The Drill Bit Working Properly. Please Keep It Properly Preserved. Avoid Falling The Bits From High Place..
Suitable For Hand-Held Drilling Rigs, Drilling Machines, Milling Machines And Machining Centers, For Metal Sheet, Maintenance And Modification, Bridge Doors And Windows, Home Appliances, Etc...
This Step Drill Bit Is Durable And Strong Enough To Punch And Drill Clean Holes In Materials Like Metal, Wood, Etc.. It Can Also Help To Enlarge Existing Holes And Clean Edges..
Features
- Shank Type: 6.3mm Hex Shank; Material: High Speed Steel with Titanium Coated; Drilling Diameters: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm.
- This step drill bit is durable and strong enough to punch and drill clean holes in materials like metal, wood, etc.. It can also help to enlarge existing holes and clean edges.
- It is Great for drilling holes for iron, metal, aluminum, copper, wood, plastic, PVC board and many other types of sheets.
- Suitable for hand-held drilling rigs, drilling machines, milling machines and machining centers, for metal sheet, maintenance and modification, bridge doors and windows, home appliances, etc..
- Note: High temperature will affect the working life, please use coolant while drilling on metals to ensure the drill bit working properly. Please keep it properly preserved. Avoid falling the bits from high place.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #7
uxcell M6 x 1.0 Spiral Point Threading Tap, H2 Tolerance High Speed Steel TICN Coated, Round Shank with Square End, Metric Screw Taps Tapping Bit for Machinist Thread Repair, 2pcs
Asin: B08J6QZRF8 | Model: a20010400ux0056 | PartNumber: a20010400ux0056
Applications: Thread Taps Are Great For Through-Hole Threads. Can Be Used For Drilling And Tapping Stainless Steel, Aluminum, Alloy Steel, Ordinary Steel, Cast Iron, Non-Ferrous Metals, Hard Plastics, Etc. Flutes On The Screw Tap Help To Remove Chips And Debris From The Hole..
Warm Tips: Machine Taps Are Suggested To Be Used With Tap Chucks With Overload Protection. It Is Not Recommended For Hand Use And Electric Drill Tapping. Micro Taps (Such As M1-M3.5) Are Mainly Used For Clocks, Watches, Low-Hardness Woods, And Soft Metals..
How To Use: Suitable For Drill Presses, Tapping Machines, Cnc And Milling Machines. Used With Tapping Oil To Get Higher Quality Threads And More Durable Taps. The Point Of The Tap Helps Guide It Into The Hole And Reduces The Torque Required To Turn It..
Material & Finish: 6542 High Speed Steel Metric Taps Run At High Speeds And Generate Threads Quickly And Efficiently, Offering High Hardness (Hrc62-64), Wear Resistance, And Good Toughness. Ticn Coating For Improving Wear Resistance, Hardness, Heat Resistance, Lubricity..
Features
- Spiral Point Tap: M6 x 1.0 thread with H2 tolerance, JIS standard, right hand thread cutting. Straight flutes taps provide provide downward chip removal, with clear threads and sharp cutting edges.
- Material & Finish: 6542 high speed steel metric taps run at high speeds and generate threads quickly and efficiently, offering high hardness (HRC62-64), wear resistance, and good toughness. TICN coating for improving wear resistance, hardness, heat resistance, lubricity.
- Applications: Thread taps are great for through-hole threads. Can be used for drilling and tapping stainless steel, aluminum, alloy steel, ordinary steel, cast iron, non-ferrous metals, hard plastics, etc. Flutes on the screw tap help to remove chips and debris from the hole.
- How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps. The point of the tap helps guide it into the hole and reduces the torque required to turn it.
- Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping. Micro taps (such as M1-M3.5) are mainly used for clocks, watches, low-hardness woods, and soft metals.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #8
uxcell Reduced Shank Twist Drill Bits 15mm High Speed Steel 4341 with 10mm Shank for Stainless Steel Alloy Metal Plastic Wood
Asin: B082D8QBBK | Model: a19102500ux0065 | PartNumber: a19102500ux0065
Reduced Shank: Reduced Shank Drill Expands The Size Range Capacity Of A Portable Drill Chuck. Common Flute And Overall Length For Minimal Adjustment During Tool Changes. Sharp And Spiral Cutting Edge Provides Neat And Smooth Cuts..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Tri-Flat On The Shank Of Drills Are Constructed For Tighter Chucking Maximizing Security For Precise Holes..
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
High Speed Steel Tool: The Twist Drill Bits Are Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance. High Cutting Edge Strength, Fast Cutting Speed..
Features
- Features: Cutting Edge Diameter : 15mm / 0.59"; Shank Diameter : 10mm / 0.39"; Cutting Edge Length: 75mm / 2.95"; Total Length : 150mm / 6.0"; Cutting Direction: Right Hand
- High Speed Steel Tool: The twist drill bits are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. High cutting edge strength, fast cutting speed.
- Reduced Shank: Reduced shank drill expands the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Sharp and spiral cutting edge provides neat and smooth cuts.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Tri-flat on the shank of drills are constructed for tighter chucking maximizing security for precise holes.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #9
uxcell Straight Shank Twist Drill Bits 6mm High Speed Steel 4341 with 6mm Shank 2 Pcs for Stainless Steel Alloy Metal Plastic Wood
Asin: B082CY7MCS | Model: a19102500ux0119 | PartNumber: a19102500ux0119
Sharp Spiral Flutes: Provide Neat And Smooth Cuts. High Cutting Edge Strength, Fast Cutting Speed. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Clamping Stable Round Shank Design, Not Easy To Shake, Tight Clamping Without Slipping.
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant.
High Speed Steel Tool: High-Speed Steel Straight Shank Tool Is Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance.
Features
- Features: Cutting Edge Diameter : 6mm / 0.24"; Shank Diameter : 6mm / 0.24"; Cutting Edge Length: 53mm / 2.09"; Total Length : 90mm / 3.54"; Cutting Direction: Right Hand
- High Speed Steel Tool: High-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Sharp Spiral Flutes: Provide neat and smooth cuts. High cutting edge strength, fast cutting speed. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Clamping stable round shank design, not easy to shake, tight clamping without slipping
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #10
uxcell Straight Shank Twist Drill Bits 8.5mm High Speed Steel 4341 with 8.5mm Shank 2 Pcs for Stainless Steel Alloy Metal Plastic Wood
Asin: B082D2FKZF | Model: a19102500ux0131 | PartNumber: a19102500ux0131
Sharp Spiral Flutes: Provide Neat And Smooth Cuts. High Cutting Edge Strength, Fast Cutting Speed. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Clamping Stable Round Shank Design, Not Easy To Shake, Tight Clamping Without Slipping.
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant.
High Speed Steel Tool: High-Speed Steel Straight Shank Tool Is Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance.
Features
- Features: Cutting Edge Diameter : 8.5mm / 0.33"; Shank Diameter : 8.5mm / 0.33"; Cutting Edge Length: 76mm / 3"; Total Length : 115mm / 0.59"; Cutting Direction: Right Hand
- High Speed Steel Tool: High-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Sharp Spiral Flutes: Provide neat and smooth cuts. High cutting edge strength, fast cutting speed. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Clamping stable round shank design, not easy to shake, tight clamping without slipping
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #11
uxcell Machine Tap 2-56 UNC Thread 2A High Speed Steel Screw Taps Threading Tapping Tool
Asin: B07Y4YHDTF | Model: a19081500ux0004 | PartNumber: a19081500ux0004
Wide Applications: The Thread Tap Is Suitable For Drilling Mild Steels, Aluminum, Iron, Copper, Stainless Steel, Hard Plastic, Processing Through Holes Or Shallow Holes. Add Appropriate Tapping Oil For Higher Quality Internal Threads And More Durable Taps..
Machine Taps: Used In Drilling Machines, Tapping Machines, Automatic Machines, Machining Centers, Cnc, Milling Machines, Not Recommended For Hand And Electric Drill Tapping. Recommended Feed Speed: Ordinary Steel: 6-15M/Min; Harder Steel Material: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
Straight Flute Tap: Straight 3 Flutes Are Ground To Provide Rapid Downward Chip Removal For Efficient Threading, Clear Threads Without Burrs, Right Hand Tapping Direction. Micro Taps Are Mainly Used In Clocks And Watches For Machining Holes In Wood And Soft Metals With Low Hardness..
High Speed Steel Tap: The Screw Tap Has High Wear Resistance, Fast Cutting Speed, High Strength And Hardness, And Long Service Life. With Uncoated Base Substrate Only, Suitable For General Purpose Tapping..
Features
- Thread Tap: Thread Size: 2-56 UNC; Class: 2A; Thread Length: 13mm / 0.51 inch; Total Length: 42mm / 1.65 inch
- High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping.
- Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps.
- Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness.
- Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min; harder steel material: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #12
uxcell Spiral Point Plug Threading Tap M4 x 0.7 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Metric Screw Taps Tapping Bit for Thread Repair, 2pcs
Asin: B07Z9QRQ43 | Model: a19091100ux0214 | PartNumber: a19091100ux0214
Applications: Thread Taps Are Great For Through-Hole Threads. Can Be Used For Drilling And Tapping Stainless Steel, Aluminum, Alloy Steel, Ordinary Steel, Cast Iron, Non-Ferrous Metals, Hard Plastics, Etc. Flutes On The Screw Tap Help To Remove Chips And Debris From The Hole..
Warm Tips: Machine Taps Are Suggested To Be Used With Tap Chucks With Overload Protection. It Is Not Recommended For Hand Use And Electric Drill Tapping. Micro Taps (Such As M1-M3.5) Are Mainly Used For Clocks, Watches, Low-Hardness Woods, And Soft Metals..
How To Use: Suitable For Drill Presses, Tapping Machines, Cnc And Milling Machines. Used With Tapping Oil To Get Higher Quality Threads And More Durable Taps. The Point Of The Tap Helps Guide It Into The Hole And Reduces The Torque Required To Turn It..
Material & Finish: 6542 High Speed Steel Metric Taps Run At High Speeds And Generate Threads Quickly And Efficiently, Offering High Hardness (Hrc62-64), Wear Resistance, And Good Toughness. Titanium Coating For Improving Wear Resistance, Hardness, Heat Resistance, Lubricity..
Features
- Spiral Point Tap: Thread size: M4 x 0.7; thread tolerance: H2; thread length: 15mm / 0.6"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide provide downward chip removal, with clear threads and sharp cutting edges.
- Material & Finish: 6542 high speed steel metric taps run at high speeds and generate threads quickly and efficiently, offering high hardness (HRC62-64), wear resistance, and good toughness. Titanium coating for improving wear resistance, hardness, heat resistance, lubricity.
- Applications: Thread taps are great for through-hole threads. Can be used for drilling and tapping stainless steel, aluminum, alloy steel, ordinary steel, cast iron, non-ferrous metals, hard plastics, etc. Flutes on the screw tap help to remove chips and debris from the hole.
- How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps. The point of the tap helps guide it into the hole and reduces the torque required to turn it.
- Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping. Micro taps (such as M1-M3.5) are mainly used for clocks, watches, low-hardness woods, and soft metals.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #13
uxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H8 Tolerance (2mm 3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm) 9pcs
Asin: B08ZM48Q6T | Model: a20102800ux0556 | PartNumber: a20102800ux0556
Applications: Cut And Remove The Thin Layer Metal On Hole Surface That Has Been Processed, Mainly To Improve The Precision Of Holes And Reduce The Surface Roughness.
How To Use: Chucking Reamers (Machine Reamers) Are Used On Lathes, Drill Presses And Screw Machines. Designed For Accurate Reaming In Stainless Steel, Aluminum, Copper, Alloy, Plastic.
Features: Straight Flute Tools Allow Chips To Collect In The Flutes And Can Make Shallow Cuts In Most Applications.
Material: High-Speed Steel Tools Are With Combination Of Hardness And Toughness For Wear Resistance, Suitable For General Purpose Applications.
Features
- Chucking Reamer: Size: 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm; tolerance: H8. Features just the base substrate without any additional coatings, good for wide ranges of applications
- Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications
- Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness
- Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications
- How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #14
uxcell Straight Shank Twist Drill Bits 3mm High Speed Steel 4341 with 3mm Shank 5 Pcs for Stainless Steel Alloy Metal Plastic Wood
Asin: B082DBF4PN | Model: a19102500ux0100 | PartNumber: a19102500ux0100
Sharp Spiral Flutes: Provide Neat And Smooth Cuts. High Cutting Edge Strength, Fast Cutting Speed. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Clamping Stable Round Shank Design, Not Easy To Shake, Tight Clamping Without Slipping.
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant.
High Speed Steel Tool: High-Speed Steel Straight Shank Tool Is Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance.
Features
- Features: Cutting Edge Diameter : 3mm / 0.12"; Shank Diameter : 3mm / 0.12"; Cutting Edge Length: 27mm / 1.06"; Total Length : 60mm / 2.36"; Cutting Direction: Right Hand
- High Speed Steel Tool: High-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Sharp Spiral Flutes: Provide neat and smooth cuts. High cutting edge strength, fast cutting speed. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Clamping stable round shank design, not easy to shake, tight clamping without slipping
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #15
uxcell Adjustable Hand Reamer 19-21mm High Speed Steel H8 6 Straight Flutes Milling Cutter Tool Metric Reaming Drill Bit for Metal
Asin: B07JP7M77M | Model: a18091400ux0331 | PartNumber: a18091400ux0331
Hand Reamer: The Reamer Drill Bit Can Be Hand Operated By Use Of A Wrench, T-Handle Wrench, Extension Rod, Drill Chuck. Used For Light Cut, Repair Work, Removing Stock Or Simply For Enlarging Holes..
Uncoated Reamer Drill Bit: Features Just The Base Substrate Without Any Additional Coatings, Used On A Wide Range Of Materials. Tapping Fluid Or Cutting Oil Can Be Used To Lubricate The Reamer And Workpiece To Help Reduce Friction And Increase Tool Life..
Straight Flute Reamer: Allows Chips And Debris To Escape Easily From The Hole, Well Suited For Most Applications In Shallow Cuts. Can Achieve The Required Roundness, Straightness, And Concentricity Of The Hole..
Wide Applications: The Reamer Is Designed To Accurately Enlarge, Smooth Or Finish Holes In Stainless Steel, Cast Iron, Aluminum, Non-Ferrous Metals, Plastic, And Wood, Widely Used In Hole Repair Work, Pipe And Fittings, Woodworking Applications..
Features
- High-speed Steel Reamers: Accuracy: H8; Adjustment Range: 19mm - 21mm (Cutting Diameter); Tool Flute Length: 63.5mm / 2.5"; Square Shank Size: 9.5mm / 0.37"; Overall Length: 181mm / 7.13". Provides durability, high hardness, good toughness, wear resistance, high temperature resistance, the ability to maintain sharpness over time.
- Wide Applications: The reamer is designed to accurately enlarge, smooth or finish holes in stainless steel, cast iron, aluminum, non-ferrous metals, plastic, and wood, widely used in hole repair work, pipe and fittings, woodworking applications.
- Hand Reamer: The reamer drill bit can be hand operated by use of a wrench, T-handle wrench, extension rod, drill chuck. Used for light cut, repair work, removing stock or simply for enlarging holes.
- Straight Flute Reamer: Allows chips and debris to escape easily from the hole, well suited for most applications in shallow cuts. Can achieve the required roundness, straightness, and concentricity of the hole.
- Uncoated Reamer Drill Bit: Features just the base substrate without any additional coatings, used on a wide range of materials. Tapping fluid or cutting oil can be used to lubricate the reamer and workpiece to help reduce friction and increase tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 7.48 x 0.79 inches
See On Amazon #16
uxcell Reduced Shank Drill Bit 20mm High Speed Steel HSS 9341 Black Oxide with 1/2 Inch Straight Shank
Asin: B07KS37Z8K | Model: a18101200ux0132 | PartNumber: a18101200ux0132
Black Oxide Finish - Black Oxide Treatment Adds Lubricity. Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Please Note: To Make Clean And Precise Holes, Water Is Required For Lubrication And Cooling When Drilling Metals. Increased Use Of Water Lubrication Will Extend Drill Bit Life.
Wide Application - Design For Drilling In Low And Medium Tensile Strength Materials, Such Aluminum, Iron, Copper, Brass And Metal.
Reduced Shank - Expanding The Size Range Capacity Of A Portable Drill Chuck. Common Flute And Overall Length For Minimal Adjustment During Tool Changes.
Features
- High Speed Steel tool - 20mm cutting diameter. Good for most general purpose applications, featuring a combination of hardness and toughness for wear resistance
- Reduced Shank - Expanding the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes
- Black Oxide Finish - Black oxide treatment adds lubricity. Small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Wide Application - Design for drilling in low and medium tensile strength materials, such aluminum, iron, copper, brass and metal
- Please Note: To make clean and precise holes, water is required for lubrication and cooling when drilling metals. Increased use of water lubrication will extend drill bit life
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.57 x 5.51 x 3.94 inches | Weight: 0.00 pounds
See On Amazon #17
uxcell Straight Shank Twist Drill Bits 12mm High Speed Steel 4341 with 12mm Shank for Stainless Steel Alloy Metal Plastic Wood
Asin: B082D9FLX6 | Model: a19102500ux0144 | PartNumber: a19102500ux0144
Sharp Spiral Flutes: Provide Neat And Smooth Cuts. High Cutting Edge Strength, Fast Cutting Speed. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Clamping Stable Round Shank Design, Not Easy To Shake, Tight Clamping Without Slipping.
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant.
High Speed Steel Tool: High-Speed Steel Straight Shank Tool Is Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance.
Features
- Features: Cutting Edge Diameter : 12mm / 0.47"; Shank Diameter : 12mm / 0.47"; Cutting Edge Length: 102mm / 4.02"; Total Length : 150mm / 5.91"; Cutting Direction: Right Hand
- High Speed Steel Tool: High-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Sharp Spiral Flutes: Provide neat and smooth cuts. High cutting edge strength, fast cutting speed. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Clamping stable round shank design, not easy to shake, tight clamping without slipping
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #18
uxcell Thread Milling Taps, 3/8-16 UNC High Speed Steel (HSS) 3 Straight Flutes Machine Screw Thread Threading Tap, 5" Length (Extra Long)
Asin: B0B6RC9L6Y | Model: a22051600ux0142 | PartNumber: a22051600ux0142
Applications: Suitable For Processing Through Holes Or Shallow Blind Holes . Used For Drilling And Tapping Aluminum, Stainless Steel, Copper, Hard Plastics, Etc.. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps..
Tips: Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection. Hand Use Or Electric Drills Use Is Not Recommended. Please Add Coolant When Tapping And Apply Anti-Rust Oil For Maintenance After Use To Prolong The Service Life..
Easy To Use: Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Recommended Feed Rate: General Steel: 6-15M/Min; Harder Steel: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
High Speed Steel: High Speed Steel Tool Has High Hardness And Toughness, Wear Resistance, Heat Resistance. Features Just The Base Substrate Without Any Coatings, Good For General Purpose Thread Tapping..
Features
- Tap Size: Thread size: 3/8-16 UNC; total length: 130mm / 5" (approx.); accuracy class: H2. Straight flute design, downward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy.
- High Speed Steel: High speed steel tool has high hardness and toughness, wear resistance, heat resistance. Features just the base substrate without any coatings, good for general purpose thread tapping.
- Applications: Suitable for processing through holes or shallow blind holes . Used for drilling and tapping aluminum, stainless steel, copper, hard plastics, etc.. Use with tapping oil to get higher quality threads and more durable taps.
- Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drills use is not recommended. Please add coolant when tapping and apply anti-rust oil for maintenance after use to prolong the service life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #19
uxcell Thread Milling Taps, 5/16-18 UNC High Speed Steel (HSS) 3 Straight Flutes Machine Screw Thread Threading Tap, 4" Length (Extra Long)
Asin: B0B6RBWK2C | Model: a22051600ux0140 | PartNumber: a22051600ux0140
Applications: Suitable For Processing Through Holes Or Shallow Blind Holes . Used For Drilling And Tapping Aluminum, Stainless Steel, Copper, Hard Plastics, Etc.. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps..
Tips: Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection. Hand Use Or Electric Drills Use Is Not Recommended. Please Add Coolant When Tapping And Apply Anti-Rust Oil For Maintenance After Use To Prolong The Service Life..
Easy To Use: Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Recommended Feed Rate: General Steel: 6-15M/Min; Harder Steel: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
High Speed Steel: High Speed Steel Tool Has High Hardness And Toughness, Wear Resistance, Heat Resistance. Features Just The Base Substrate Without Any Coatings, Good For General Purpose Thread Tapping..
Features
- Tap Size: Thread size: 5/16-18 UNC; total length: 100mm / 4" (approx.); accuracy class: H2. Straight flute design, downward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy.
- High Speed Steel: High speed steel tool has high hardness and toughness, wear resistance, heat resistance. Features just the base substrate without any coatings, good for general purpose thread tapping.
- Applications: Suitable for processing through holes or shallow blind holes . Used for drilling and tapping aluminum, stainless steel, copper, hard plastics, etc.. Use with tapping oil to get higher quality threads and more durable taps.
- Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Recommended feed rate: general steel: 6-15m/min; harder steel: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drills use is not recommended. Please add coolant when tapping and apply anti-rust oil for maintenance after use to prolong the service life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #20
uxcell Metric Machine Tap M5x 0.8mm H2 High Speed Steel 3 Straight Flutes Screw Tapping Threading Machinist Repair DIY Tool 2pcs
Asin: B07KT3PPF3 | Model: a18102400ux0269 | PartNumber: a18102400ux0269
Suitable For Processing Through Holes Or Shallow Holes On Most Metals, Iron Plate, Copper, Zinc, Alloy Steel, Abrasive Steel, A3 Steel, Stainless Steel, Etc.. Add Appropriate Tapping Oil For Higher Quality Internal Threads And More Durable Taps..
Machine Taps Used With Drilling Machines, Tapping Machines, Automatic Machines, Machining Centers, Cnc, Milling Machines, Not Recommended For Hand And Electric Drill Tapping. Recommended Feed Speed: Ordinary Steel: 6-15M/Min; Harder Steel Material: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
Standard Metric Thread Design, Clear And Tidy, Provide Rapid Chip Removal For Efficient Threading. Straight Flute Design, Right Hand Tapping Direction. The Mini Metric Taps Are Mainly Used For Clocks, Watches, Low Hardness Wood And Soft Metal Hole Processing..
The Thread Tap Can Make New Threads Or Re-Thread Damaged Or Jammed Threads. Uncoated Taps Feature Just The Base Substrate Without Any Additional Coatings, And Fit A Wide Range Of Applications..
Features
- Thread Size: M5x 0.8mm. High-speed steel metric taps are with high hardness and toughness for wear resistance, well suited for general purpose applications.
- The thread tap can make new threads or re-thread damaged or jammed threads. Uncoated taps feature just the base substrate without any additional coatings, and fit a wide range of applications.
- Suitable for processing through holes or shallow holes on most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Add appropriate tapping oil for higher quality internal threads and more durable taps.
- Standard metric thread design, clear and tidy, provide rapid chip removal for efficient threading. Straight flute design, right hand tapping direction. The mini metric taps are mainly used for clocks, watches, low hardness wood and soft metal hole processing.
- Machine taps used with drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min; harder steel material: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 4.72 x 1.97 inches | Weight: 0.00 Pounds
See On Amazon
Looking For Something Else?
Search