cncarbonfiber Thin Carbon Fiber Sheet 0.2mm 250x250x0.2mm Twill Glossy Finish,Easy to Cut, (CFS0.2-250G)
Asin: B099PRV7RX | Model: CFS0.2-250G | PartNumber: CFS0.2-250G | Ean: 0735279177572 | UPC: 735279177572
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Brand: cncarbonfiber | Manufacturer: cncarbonfiber
See On Amazon Similar To cncarbonfiber Thin Carbon Fiber Sheet
#1
Carbon Fiber Insole, Rigid Insert for Foot Arthritis, Mortons Toe, Turf Toe, Hallux Limitus, Hallux Rigidus, 1 Piece 27.5cm(Fit Women's Size 12, Men's 11)
Asin: B098BMMZNC | Ean: 0735279177435 | UPC: 735279177435
For Proper Fit Carbon Fiber Insert Must Be ¼ - ½ Inch (Approximately 1 Cm) Shorter Than Removable Insert In Shoe (Because It Is Stiff), If In Between Sizes Or Half Sizes Round Down To Smaller Size, And You Should Use This Rigid Insole Below Your Original Removable Insole..
The Carbon Insert Also Protects Your Feet And Shoes When You're Hiking On Rugged Terrain Outdoors, It Can Effectively Prevent The Shoes From Over Twisting And The Puncture Of Sharp Objects..
Carbon Fiber Material Is Used In Medical, Airplanes, Space Technology, Race Cars And Sporting Goods Equipment For The Unique Combination Of Lightweight, High Stiffness And Durability. Very Thin Thickness Of Carbon Fiber Sheet Has Enough Hardness And Strength..
Carbon Fiber Insert Thickness:1.2Mm , They Are Light And Thin. They Can Be Worn On Your Right Or Left Foot..
Features
- The flat carbon fiber insole can reduce foot pain and supports foot recovery, treatment for injuries such as turf-toe, mortons toe, mid-foot sprains, metatarsal stress fractures, toe fractures, hallux limitus, hallux rigidus, lis franc ,arthritis, forefoot trauma - sprained toe. Prevention of recurring chronic injuries.
- Carbon fiber insert thickness:1.2mm , they are light and thin. They can be worn on your right or left foot.
- For proper fit carbon fiber insert must be - inch (approximately 1 cm) shorter than removable insert in shoe (because it is stiff), If in between sizes or half sizes round down to smaller size, and you should use this rigid insole below your original removable insole.
- Carbon fiber material is used in medical, airplanes, space technology, race cars and sporting goods equipment for the unique combination of lightweight, high stiffness and durability. Very thin thickness of carbon fiber sheet has enough hardness and strength.
- The carbon insert also protects your feet and shoes when you're hiking on rugged terrain outdoors, it can effectively prevent the shoes from over twisting and the puncture of sharp objects.
- See more on Amazon...
Brand: Leeuoe | Manufacturer: cncarbonfiber
See On Amazon #2
1 Pair Morton's Extension Orthotic,Carbon Fiber Insole,Rigid Foot Support Insert for Morton's Toe,Turf Toe,Hallux Rigidus,Arthritis 24.5cm(Men's Size 8/Women 9)
Asin: B0B5RCKR3Q
For Proper Fit Carbon Fiber Insert Must Be ¼ - ½ Inch (Approximately 1.0Cm) Shorter Than Removable Insert In Shoe (Because It Is Stiff), If In Between Sizes Or Half Sizes Round Down To Smaller Size..
Package Include: 1 Pair(2 Pieces) Carbon Fiber Insert Sheets..
Note: Please Follow Your Doctor's Advice To Make Sure This Product Is Suitable For You..
Carbon Fiber Insert Can Be Worn On Your Right Or Left Foot. The Insert Must Be Placed Directly Under The Removable Shoe Insole..
Features
- The stiff and thin carbon fiber insert can limit the movement of big toe and provide support, reducing foot pain and help to recover from foot injuries effectively, suitable for Morton's Toe, Turf Toe and Hallux Rigidus.
- Carbon fiber insert can be worn on your right or left foot. The insert must be placed directly under the removable shoe insole.
- For proper fit carbon fiber insert must be - inch (approximately 1.0cm) shorter than removable insert in shoe (because it is stiff), If in between sizes or half sizes round down to smaller size.
- Note: Please follow your doctor's advice to make sure this product is suitable for you.
- Package include: 1 pair(2 pieces) carbon fiber insert sheets.
- See more on Amazon...
Brand: Leeuoe | Manufacturer: cncarbonfiber
See On Amazon #3
Carbon Fiber Shoe Insert, Semi-Rigid Insole,1 Piece 25.5cm
Asin: B09LC1584T | Ean: 0735279178272 | UPC: 735279178272
For Proper Fit Carbon Fiber Insert Must Be ¼ - ½ Inch (Approximately 1 Cm) Shorter Than Removable Insert In Shoe (Because It Is Stiff), If In Between Sizes Or Half Sizes Round Down To Smaller Size, And You Should Use This Semi-Rigid Insole Below Your Original Removable Insole..
The Carbon Insert Also Protects Your Feet And Shoes When You're Hiking On Rugged Terrain Outdoors, It Can Effectively Prevent The Shoes From Over Twisting And The Puncture Of Sharp Objects..
Carbon Fiber Material Is Used In Medical,Airplanes, Space Technology, Race Cars And Sporting Goods Equipment For The Unique Combination Of Lightweight, High Stiffness And Durability. Very Thin Thickness Of Carbon Fiber Sheet Has Enough Hardness And Strength..
Carbon Fiber Insert Thickness:1.0Mm , It Is Light And Thin. They Can Be Worn On Your Right Or Left Foot. And The Insert Must Be Placed Directly Under The Removable Shoe Insole Or Under Orthotic..
Features
- Less stiffening and more flexible carbon fiber insert, Treatment for injuries such as turf-toe, mid-foot sprains, metatarsal stress fractures, toe fractures, hallux limitus, prevention of recurring chronic injuries, and transition from rigid insert to semi-rigid as injury improves.
- Carbon fiber insert thickness:1.0mm , it is light and thin. They can be worn on your right or left foot. And the insert must be placed directly under the removable shoe insole or under orthotic.
- For proper fit carbon fiber insert must be - inch (approximately 1 cm) shorter than removable insert in shoe (because it is stiff), If in between sizes or half sizes round down to smaller size, and you should use this semi-rigid insole below your original removable insole.
- Carbon fiber material is used in medical,airplanes, space technology, race cars and sporting goods equipment for the unique combination of lightweight, high stiffness and durability. Very thin thickness of carbon fiber sheet has enough hardness and strength.
- The carbon insert also protects your feet and shoes when you're hiking on rugged terrain outdoors, it can effectively prevent the shoes from over twisting and the puncture of sharp objects.
- See more on Amazon...
Brand: Leeuoe | Manufacturer: cncarbonfiber
See On Amazon #4
Carbon Fiber Shoe Arthritic Insert,Very Rigid Insole,1 Piece 31.5cm(Men Size 15/Women 16)
Asin: B09QLRJFNP | Ean: 0702401782041 | UPC: 702401782041
For Proper Fit Carbon Fiber Insert Must Be ¼ - ½ Inch (Approximately 1 Cm) Shorter Than Removable Insert In Shoe (Because It Is Stiff), If In Between Sizes Or Half Sizes Round Down To Smaller Size, And You Should Use This Very-Rigid Insole Below Your Original Removable Insole..
Package Include: 1 Piece Pure Carbon Fiber Insole/Insert..
Carbon Fiber Material Is Used In Medical,Airplanes, Space Technology, Race Cars And Sporting Goods Equipment For The Unique Combination Of Lightweight, High Stiffness And Durability. Very Thin Thickness Of Carbon Fiber Sheet Has Enough Hardness And Strength..
Carbon Fiber Insert Thickness:1.6Mm , It Is Light And Thin. They Can Be Worn On Your Right Or Left Foot. And The Insert Must Be Placed Directly Under The Removable Shoe Insole Or Under Orthotic..
Features
- Maximum stiffening and minimal flexible carbon fiber insert, Treatment for for mid-foot arthritis, advanced hallux rigidus post-op care of foot and toe surgeries, or other conditions requiring minimal movement of the foot.
- Carbon fiber insert thickness:1.6mm , it is light and thin. They can be worn on your right or left foot. And the insert must be placed directly under the removable shoe insole or under orthotic.
- For proper fit carbon fiber insert must be - inch (approximately 1 cm) shorter than removable insert in shoe (because it is stiff), If in between sizes or half sizes round down to smaller size, and you should use this very-rigid insole below your original removable insole.
- Carbon fiber material is used in medical,airplanes, space technology, race cars and sporting goods equipment for the unique combination of lightweight, high stiffness and durability. Very thin thickness of carbon fiber sheet has enough hardness and strength.
- Package include: 1 piece pure carbon fiber insole/insert.
- See more on Amazon...
Brand: Leeuoe | Manufacturer: cncarbonfiber
See On Amazon #5
6.5ft x 12" Carbon Fiber Fabric Roll Pure Fabric Carbon Fiber Sheet 2 x 2 Twill Weave 3k/220g for Cars for Structural Reinforcement on Concrete Walls, Basements, Boats (1 Roll)
Asin: B0BCNQXN7D | Model: KH-Jecery-873 | PartNumber: KH-Jecery-873
Reliable Material: The Carbon Fiber Cloth For Cars Is Soft Raw, With Flexibility Of The Finished Cloth, And The Construction Not Easy To Bulge; This Carbon Fiber Fabric Is Twill Fabric, With Vertical And Horizontal Bi Directional Strength, Uniform Force, Not Easy To Bend, But Easy To Cut, Light But Strong.
Wide Range Of Applications: Black Carbon Fiber Cloth Has Many Applications; It Can Wrap Complex Shaped Structures, Be Applied For Structural Reinforcement Of Concrete Wall, Basement, Boat, Or Simply As A Stronger Alternative To Glass Fiber.
Stable Performance: The Carbon Fiber Wrap Has Luster, High Carbon Content, Not Affected By Harsh Surroundings, Acid And Alkali Resistant, Corrosion Resistant, To Provide Long Service Life.
More Specifications: The Carbon Fiber Cloth Adopts 2 X 2 Twill Weave, Weighing 220 G/ Sq Meter, Using Tow Of 3000 Filaments, Convenient Tools At Hand.
Features
- Size Information: you will get 1 roll of carbon fiber fabric measures about 12 inches/ 30 cm in width, 6.5 feet/ 2 meters in length, and 0.01 inch/ 0.25 mm in thickness, enough size to meet your needs
- More Specifications: the carbon fiber cloth adopts 2 x 2 twill weave, weighing 220 g/ sq meter, using tow of 3000 filaments, convenient tools at hand
- Reliable Material: the carbon fiber cloth for cars is soft raw, with flexibility of the finished cloth, and the construction not easy to bulge; This carbon fiber fabric is twill fabric, with vertical and horizontal bi directional strength, uniform force, not easy to bend, but easy to cut, light but strong
- Stable Performance: the carbon fiber wrap has luster, high carbon content, not affected by harsh surroundings, acid and alkali resistant, corrosion resistant, to provide long service life
- Wide Range of Applications: black carbon fiber cloth has many applications; It can wrap complex shaped structures, be applied for structural reinforcement of concrete wall, basement, boat, or simply as a stronger alternative to glass fiber
- See more on Amazon...
Brand: Jecery | Manufacturer: Jecery
See On Amazon #6
Tudomro 10ft x 12" Carbon Fiber Sheet Black Carbon Fiber Fabric Pure Carbon Fiber Cloth 2 x 2 Twill Weave-3k/220g for Cars Structural Reinforcement on Concrete Wall Basement Boat Repair (1 Roll)
Asin: B0BXLJTYGN | Model: Tudomro-Fiber Fabric-01 | PartNumber: Tudomro-Fiber Fabric-01
Reliable And Durable: With Soft Materials, The Carbon Fiber Twill Fabric Has The Flexibility Of Finished Cloth And Not Easy To Bulge Structure, Uniform Force And Will Not Bend Easily With Vertical And Horizontal Bidirectional Strength, Lightweight But Strong, Cuttable According To Your Preference.
Widely Applicable: The Carbon Fiber Fabric Twill Weave Is Utility And Multiple Purposes, And Can Be Applied To Wrap Complex Shaped Structures, Or Taken As Useful Structural Reinforcement Of Concrete Walls, Basements And Boats, And A Firmer Substitute For Fiberglass, Easily Solving Wrapping, Repair, Protection And Reinforcement Problems.
Nice Performance: Our Black Colored Carbon Fiber Fabric Is Glossy And Has A High Carbon Content, Will Not Be Affected By Harsh Surroundings Easily, Resistant To Acid, Alkali And Corrosion Resistance, Providing You With A Long Term Use.
Well Made: This Carbon Fiber Roll Adopts 2 X 2 Twill Weave, Weighing 220 G/Square Meter, Adopts 3000 Long Filaments, Solid And Serviceable, Practical And Serviceable, And Can Give You More Convenience.
Features
- Detailed Information: the package comes with 1 roll of carbon fiber twill weave cloth, which is about 12 inches/ 30 cm in width, 10 feet/ 3 meters in length, and 0.25mm in thickness; This carbon fiber vinyl wrap is adequate to satisfy your use demands
- Well Made: this carbon fiber roll adopts 2 x 2 twill weave, weighing 220 g/square meter, adopts 3000 long filaments, solid and serviceable, practical and serviceable, and can give you more convenience
- Reliable and Durable: with soft materials, the carbon fiber twill fabric has the flexibility of finished cloth and not easy to bulge structure, uniform force and will not bend easily with vertical and horizontal bidirectional strength, lightweight but strong, cuttable according to your preference
- Nice Performance: our black colored carbon fiber fabric is glossy and has a high carbon content, will not be affected by harsh surroundings easily, resistant to acid, alkali and corrosion resistance, providing you with a long term use
- Widely Applicable: the carbon fiber fabric twill weave is utility and multiple purposes, and can be applied to wrap complex shaped structures, or taken as useful structural reinforcement of concrete walls, basements and boats, and a firmer substitute for fiberglass, easily solving wrapping, repair, protection and reinforcement problems
- See more on Amazon...
Brand: Tudomro | Manufacturer: Tudomro
See On Amazon #7
5 FT x 12" - Carbon Fiber FABRIC-2x2 Twill WEAVE-3K/220g
Asin: B01FNA1JOW | Model: 12-TWL-12K-400-5FT | PartNumber: 12-TWL-12K-400-5FT | Ean: 0762137424714 | UPC: 762137424714
Brand: Carbon Kevlar Supply | Manufacturer: CARBON FIBER
Dimensions: 3.00 x 12.00 x 3.00 inches
See On Amazon #8
Kalolary Carbon Fiber Board Plate 240 X 240 X 1 MM, Carbon Fiber Sheets Available in 0.5mm 1mm 1.5mm 2mm 2.5mm 3mm 4mm Plain Weave Carbon Fiber Sheets 100% 3K Glossy Surface Carbon Fiber Plate
Asin: B0B6HXW36J | Model: Kalolary-Z086 | PartNumber: Kalolary-Z086
【3K Carbon Fiber Board】This 3K Carbon Fiber With 3000 Filaments Is Strong, Yet Lightweight As It Is Filled In Each Tow Or Bundle..
【Easy To Cut】You Can Easily Cut Out The Shape That You Require Without Much Effort As The Material Is Easy To Work With Yet Very Strong. Cut With Precision And Obtain Fine Straight Edges Without Burs With Our Carbon Fiber Flat Sheets..
【Wide Application】Perfect For Any Application Including Rc Airplanes, Drones, Helicopters, Multicopter, Car Exteriors And Interiors Surfaces, Car Door Handles, Cellphone, Laptop, Etc..
【100% Carbon Fiber Plate】 Made Of Pure Carbon Fiber Material, Without Any Fillers/Composite Layers. High-Quality Carbon Fiber Materials Texture Which Is Sturdy, Light And Very Strong..
Features
- Plain Weave Glossy Surface Plain weave finish, clear texture. Carbon fiber plate has high strength and lightweight, good corrosion resistance, it has a long service life. There are three size of 240*240mm, 300*300mm and 400*400mm with multi thickness of 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm and 4mm for you to choose.
- 100% Carbon Fiber Plate Made of pure carbon fiber material, without any fillers/composite layers. High-quality carbon fiber materials texture which is sturdy, light and very strong.
- 3K Carbon Fiber Board This 3k carbon fiber with 3000 filaments is strong, yet lightweight as it is filled in each tow or bundle.
- Wide Application Perfect for any application including RC airplanes, drones, helicopters, multicopter, car exteriors and interiors surfaces, car door handles, cellphone, laptop, etc.
- Easy to Cut You can easily cut out the shape that you require without much effort as the material is easy to work with yet very strong. Cut with precision and obtain fine straight edges without burs with our carbon fiber flat sheets.
- See more on Amazon...
Brand: Kalolary | Manufacturer: Kalolary
See On Amazon #9
Treela 50" x 12" Carbon Fiber Cloth Carbon Fiber Fabric Roll Wrap Fabric Carbon Fiber Sheet 2 x 2 Plain Weave-3k/220g for Structural Reinforcement on Concrete Walls, Basements, Boats
Asin: B0BXD6FQ8L
Quality And Durable: The Fabric Is Soft, Carbon Fiber Cloth Fabric Has The Flexibility Of Finished Cloth, Lightweight And Strong, And The Construction Is Not Easy To Bulge; This Kind Of Carbon Fiber Cloth Is Plain Fabric, Vertical And Horizontal Bidirectional Force, Uniform Force, Not Easy To Bend, Simple Cutting.
Ideal Performance: The Carbon Fiber Roll Has Luster, High Carbon Content, Stability Is Not Affected By Harsh Environment, Acid And Alkali Resistance, Corrosion Resistance, Can Be Applied For A Long Time, Providing You With A Nice Using Experience.
Applicable For: The Carbon Fiber Weave Fabric Is Widely Applicable For A Wide Range Of Applications, Such As Wrapping Complex Shaped Structures, Reinforcing Concrete Walls, Basements, Boat Structures, Automotive Industry, Or Simply As A Sturdier Alternative To Fiberglass.
Plain Weave: With A 2 X 2 Plain Weave And A Weight Of 220 G/ Sq. Meter, The Carbon Fiber Cloth Black Uses Tow Of 3000 Filaments, A Truly Convenient Tool For You To Use In Daily Work Or Daily Life.
Features
- Size Information: the carbon fiber fabric black you will be provided has a width of about 12 inches/ 30 cm, a length of 50 inches/ 127 cm and a thickness of about 0.22 mm, right size to satisfy your demands for daily use and replacement
- Plain Weave: with a 2 x 2 plain weave and a weight of 220 g/ sq. meter, the carbon fiber cloth black uses tow of 3000 filaments, a truly convenient tool for you to use in daily work or daily life
- Quality and Durable: the fabric is soft, carbon fiber cloth fabric has the flexibility of finished cloth, lightweight and strong, and the construction is not easy to bulge; This kind of carbon fiber cloth is plain fabric, vertical and horizontal bidirectional force, uniform force, not easy to bend, simple cutting
- Applicable for: the carbon fiber weave fabric is widely applicable for a wide range of applications, such as wrapping complex shaped structures, reinforcing concrete walls, basements, boat structures, automotive industry, or simply as a sturdier alternative to fiberglass
- Ideal Performance: the carbon fiber roll has luster, high carbon content, stability is not affected by harsh environment, acid and alkali resistance, corrosion resistance, can be applied for a long time, providing you with a nice using experience
- See more on Amazon...
Brand: Treela | Manufacturer: Treela
Dimensions: 1.97 x 14.57 x 2.36 inches
See On Amazon #10
Carbon Fiber Fabric Roll 6.5ft x 12 Fabric Mesh Carbon Fiber Cloth Carbon Fiber Sheet Pure Fabric Roll for Cars for Structural Reinforcement on Concrete Walls, Basements, Boats DIY Projects
Asin: B0CDGPJ5MG | Ean: 0727238206935 | UPC: 727238206935
High Durability, Because It Does Not Rust, It Is Very Suitable For Use In High Acid, Alkali, Salt And Atmospheric Corrosion Environment..
Flexible Bending, Shear Reinforcement. Simple Operation, Can Improve Your Efficiency..
In A Wide Range Of Application Scenarios, It Can Be Used To Reinforce Tunnels, Harbor Facilities, Chimneys, Warehouses, And Factories..
This Kind Of Material Has High Strength, Low Density, Thin Thickness, And Basically Does Not Increase The Weight And Section Size Of The Reinforced Component..
Features
- The dimensions of the product are about 12 inches /30 cm wide and 6.5 feet /2 meters long, and can be cut according to your needs.
- This kind of material has high strength, low density, thin thickness, and basically does not increase the weight and section size of the reinforced component.
- High durability, because it does not rust, it is very suitable for use in high acid, alkali, salt and atmospheric corrosion environment.
- In a wide range of application scenarios, it can be used to reinforce tunnels, harbor facilities, chimneys, warehouses, and factories.
- Flexible bending, shear reinforcement. simple operation, can improve your efficiency.
- See more on Amazon...
Brand: Caliwill | Manufacturer: Caliwill
See On Amazon #11
cncarbonfiber 6 pcs 6mm Square Carbon Fiber Tubes 6x6x5x420mm Inner Round(OD 5mm),3/4/8/10mm Available,Pultruded Carbon Fiber Rods
Asin: B08SVKM3SM | Model: TUBE-square6 | PartNumber: TUBE-square6 | Ean: 0735279176414 | UPC: 735279176414
High Modulus. High Temperature Resistance.
Suitable For Aircraft And Industrial Use.
Light But High Strength.
Each Tube Weight Is 10.7G/Pcs..
Features
- 100% pure carbon fiber material
- Each tube weight is 10.7g/pcs.
- High modulus. High temperature resistance
- Light but high strength
- Suitable for aircraft and industrial use
- See more on Amazon...
Brand: cncarbonfiber | Manufacturer: cncarbonfiber
See On Amazon #12
200 X 300 X 1 MM Carbon Fiber Sheets - 100% 3K Twill Matte Carbon Fiber Plate for Handmade DIY Wallet Model Part Repair Panel
Asin: B0B2PF71M9 | Model: 200X300X1MM | PartNumber: 200X300X1MM
High-Performance Design - Carbon Fiber Sheets Have A Matte Finish On Both Sides With A Plastic Surface Protection Sheet And Have Been Press Cured For Maximum Carbon Density And Strength, With High-Grade Mechanical Properties And A Perfect Surface Finish..
Customer Support: We Have 0.5Mm/1Mm/2Mm/3Mm Thicknesses Sheets Are Chosen, Please Check The Finish Of The Surface After Receiving The Goods, If You Have Any Questions Please Contact Our Customer Service Team, We Are Happy To Solve Them For You..
Super Strong & Lightweight - Our Carbon Sheets Are Super Stiff, Sturdy, Lightweight, Durable, Will Not Tear Or Rip Easily, And Easy To Cut With A Saw Or Water Jet Without Crumbs Being Created, And Do Some Amazing Diy Jobs Easily..
Wide Application - Carbon Fiber Sheets Twill Weave Pattern Was Straight And Uniform Which Has An Attractive Appearance And Performance, Great For Diy Hobbyist Projects Like R/C Cars Or Drones, Quadcopters, And Prototypes, Backing Plates, Dash Filler Plates, Etc..
Features
- Premium Carbon Fiber Sheets - Our high-strength vacuum-infused composite carbon fiber sheets are manufactured using 100% carbon fiber reinforced with a clear epoxy resin matrix. All composite stacks are laid by hand to ensure maximum homogenization of fiber alignment that provide high bending stiffness and axial strength
- Wide Application - Carbon fiber sheets twill weave pattern was straight and uniform which has an attractive appearance and performance, great for DIY hobbyist projects like R/C cars or drones, quadcopters, and Prototypes, backing plates, dash filler plates, etc.
- High-Performance Design - Carbon fiber sheets have a matte finish on both sides with a plastic surface protection sheet and have been press cured for maximum carbon density and strength, with high-grade mechanical properties and a perfect surface finish.
- Super Strong & Lightweight - Our carbon sheets are super stiff, sturdy, lightweight, durable, will not tear or rip easily, and easy to cut with a saw or water jet without crumbs being created, and do some amazing DIY jobs easily.
- Customer Support: We have 0.5MM/1MM/2MM/3MM thicknesses sheets are chosen, please check the finish of the surface after receiving the goods, if you have any questions please contact our customer service team, we are happy to solve them for you.
- See more on Amazon...
Brand: FAKILO | Manufacturer: FAKILO
See On Amazon #13
cncarbonfiber 8pcs 2.0mm Round Carbon Fiber Tube 2.0x1.0x300mm pultrusion for Quadcopter RC Airplanes
Asin: B09418CDJD | Model: TUBE-P0201300r | PartNumber: TUBE-P0201300r | Ean: 0735279176865 | UPC: 735279176865
100% Pure Carbon Fiber.
High Strength&Light Weight.
Tolerance:+/-0.1 Mm.
Each Tube Weight: 1.2 G/Pcs.
Features
- UV Resistance
- Each tube weight: 1.2 g/pcs
- 100% pure carbon fiber
- Tolerance:+/-0.1 mm
- High strength&Light weight
- See more on Amazon...
Brand: cncarbonfiber | Manufacturer: cncarbonfiber
See On Amazon #14
ARRIS 100 X 250 X 1.0MM Carbon Fiber Sheet, Available in 0.5MM 1.5MM 2.0MM 2.5MM 3.0MM 3.5MM 4.0MM 5MM 6MM 3K Real Carbon Fibre Sheets, Laminate Carbon Plate Plain Glossy
Asin: B09X14J14S | Model: AA0045-Glossy | PartNumber: AA0045-Glossy
✅ High Quality, Lightweight & High Strength -The Arris 3K Carbon Fiber With 3000 Filaments Is Strong, Yet Lightweight As It Is Filled In Each Tow Or Bundle. Compared With Steel Plates, The Quality Of Carbon Fiber Plates Is Only 1/4 Of That Of Steel Plates, But Its Strength Is 7 To 9 Times That Of Steel. Whether You're Building A Drone Or A High-Performance Sports Car, These Sheet Of Carbon Fiber Will Help Reduce Weight And Improve Performance..
✅ Arris Is Committed To Delivering Premium Carbon Fiber Products And Unparalleled Customer Service. We Focus On Providing Top-Quality, High-Performance Products Backed By Comprehensive After-Sales Support. With Our 60-Day Return Policy, You Can Trust Arris For Top-Quality Carbon Fiber Products And Superior Customer Care..
✅ Widely Application - Arris Real Carbon Fiber Sheets Find Wide-Ranging Applications Across Industries Such As Aerospace, Automotive, Robotics, And Diy Projects. Ideal For Rc Airplanes, Drones, Helicopters, Car Exteriors And Interiors, Cellphone And Laptop Components, Cnc Engraving, Cutting, Milling, As Well As Backing Plates, Dash Filler Plates, Gearshifts, Instrument Panels..
✅ Multiple Variation - Arris Offers Both Plain Glossy And Twill Matt Finish Carbon Fiber Pannel Sheets With Sizes Ranging From 100X250mm, 240X240mm And 200X300mm And Comes In 0.5Mm, 1Mm, 1.5Mm, 2Mm, 2.5Mm, 3Mm, 3.5Mm, 4Mm, 4.5Mm, 5Mm, 6Mm Thickness. We Also Have Other Size Available In Our Store. If You Looking For Other Custom Size, We Can Also Tailored One For You..
Features
- 100% REAL CARBON FIBER SHEET - Made of pure carbon fiber material, without any fillers/composite layers, ARRIS carbon fibre sheet features super stiff, sturdy, lightweight, and sustained, will not tear or rip easily, and easy to cut with a saw or water jet without crumbs being created, and do some amazing DIY jobs easily.
- MULTIPLE VARIATION - ARRIS offers both plain glossy and twill matt finish carbon fiber pannel sheets with sizes ranging from 100x250mm, 240x240mm and 200x300mm and comes in 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 6mm thickness. We also have other size available in our store. If you looking for other custom size, we can also tailored one for you.
- HIGH QUALITY, LIGHTWEIGHT & HIGH STRENGTH -The ARRIS 3k carbon fiber with 3000 filaments is strong, yet lightweight as it is filled in each tow or bundle. Compared with steel plates, the quality of carbon fiber plates is only 1/4 of that of steel plates, but its strength is 7 to 9 times that of steel. Whether you're building a drone or a high-performance sports car, these sheet of carbon fiber will help reduce weight and improve performance.
- WIDELY APPLICATION - ARRIS real carbon fiber sheets find wide-ranging applications across industries such as aerospace, automotive, robotics, and DIY projects. Ideal for RC airplanes, drones, helicopters, car exteriors and interiors, cellphone and laptop components, CNC engraving, cutting, milling, as well as backing plates, dash filler plates, gearshifts, instrument panels.
- ARRIS is committed to delivering premium carbon fiber products and unparalleled customer service. We focus on providing top-quality, high-performance products backed by comprehensive after-sales support. With our 60-day return policy, you can trust ARRIS for top-quality carbon fiber products and superior customer care.
- See more on Amazon...
Brand: ARRIS | Manufacturer: Hobby Wing
See On Amazon #15
FANCYWING 100X250X1.0MM 1.5MM 2.0MM 2.5MM 3.0MM 3.5MM 4.0MM 5.0MM 6.0MM Carbon Fiber Sheet 100% 3K Carbon Fiber Laminate Plate Twill Weave Panel Sheet 2.0MM Thickness(Matte Finish)
Asin: B09WVL74DQ | Model: FW-AA0047-Matt | PartNumber: FW-AA0047-Matt
Features: Strong Strength And Light Weight.
Thickness: 2.0Mm.
Size: 100X250mm.
The Surface Is Plain Weave, Glossy Surface Without Any Glass Fiber Contents. It Is Specially Applicable For Multicopter, Helicopter And Rc Airplanes..
Features
- Notice: Please check the thickness and size details carefully before you purchase. Our shop also have matte finish for choice.
- The surface is plain weave, glossy surface without any glass fiber contents. It is specially applicable for multicopter, helicopter and rc airplanes.
- Features: Strong Strength and Light Weight
- Size: 100X250MM
- Thickness: 2.0MM
- See more on Amazon...
Brand: FANCYWING | Manufacturer: FANCYWING
Dimensions: 0.30 x 11.00 x 5.00 inches
See On Amazon #16
cncarbonfiber 0.5mm 200x300mm 100% Carbon Fiber Sheet Laminate Plate Panel 3K Twill Matte Finish
Asin: B07GCXX45Y | Model: CF-sheet20030005 | PartNumber: CF-sheet20030005 | Ean: 0795891160871 | UPC: 795891160871
Carbon Fiber Plate Has High Strength And Lightweight, Good Corrosion Resistance, It Has A Long Service Life..
Fully Support Amazon's Sales And Return Policy. If You Have Any Questions Or Customization Needs,Please Contact Us..
Perfect For Many Application: Cnc Engraving, Cutting, Milling, Diy Crafts,Aircraft,Rc And So On..
Made Of Pure Carbon Fiber Material, Without Any Fillers/Glass Fiber Layers, The Density Is 1.6-1.7G/Cm³(Water 1.0G/Cm³, Aluminum2.7G/Cm³ ). 3K Twill Matte Finish, Clear Texture..
Features
- Package include: 1pcs x carbon fiber sheet. Dimension: 200 x 300 x0.5mm.
- Made of pure carbon fiber material, without any fillers/glass fiber layers, the density is 1.6-1.7g/cm (water 1.0g/cm , Aluminum2.7g/cm ). 3k twill matte finish, clear texture.
- Carbon fiber plate has high strength and lightweight, good corrosion resistance, it has a long service life.
- Perfect for many application: CNC engraving, cutting, milling, DIY crafts,aircraft,RC and so on.
- Fully support Amazon's sales and return policy. If you have any questions or customization needs,please contact us.
- See more on Amazon...
Brand: cncarbonfiber | Manufacturer: cncarbonfiber
Dimensions: 0.01 x 11.81 x 7.87 Inches
See On Amazon #17
ARRIS 300x400x 1.5mm Carbon Fiber Sheet, 0.5mm 1mm 2mm 2.5mm 3mm 3.5mm 4.5mm 5.0mm 6mm Thickness Available 3K Carbon Fiber Plate Plain Glossy Pannel Sheets
Asin: B09X15K6GG | Model: AA0039-Glossy | PartNumber: AA0039-Glossy
✅ High Quality, Lightweight & High Strength -The Arris 3K Carbon Fiber With 3000 Filaments Is Strong, Yet Lightweight As It Is Filled In Each Tow Or Bundle. Compared With Steel Plates, The Quality Of Carbon Fiber Plates Is Only 1/4 Of That Of Steel Plates, But Its Strength Is 7 To 9 Times That Of Steel. Whether You're Building A Drone Or A High-Performance Sports Car, These Sheet Of Carbon Fiber Will Help Reduce Weight And Improve Performance..
✅ Arris Is Committed To Delivering Premium Carbon Fiber Products And Unparalleled Customer Service. We Focus On Providing Top-Quality, High-Performance Products Backed By Comprehensive After-Sales Support. With Our 60-Day Return Policy, You Can Trust Arris For Top-Quality Carbon Fiber Products And Superior Customer Care..
✅ Widely Application - Arris Real Carbon Fiber Sheets Find Wide-Ranging Applications Across Industries Such As Aerospace, Automotive, Robotics, And Diy Projects. Ideal For Rc Airplanes, Drones, Helicopters, Car Exteriors And Interiors, Cellphone And Laptop Components, Cnc Engraving, Cutting, Milling, As Well As Backing Plates, Dash Filler Plates, Gearshifts, Instrument Panels..
✅ Multiple Variation - Arris Offers Both Plain Glossy And Twill Matt Finish Carbon Fiber Pannel Sheets With Sizes Ranging From 300X300mm, 300X400mm And 400X500mm And Comes In 0.5Mm, 1Mm, 1.5Mm, 2Mm, 2.5Mm, 3Mm, 3.5Mm, 4Mm, 4.5Mm, 5Mm, 6Mm Thickness. We Also Have Other Size From 150X200mm To 600X600mm Available In Our Store. If You Looking For Other Custom Size, We Can Also Tailored One For You..
Features
- 100% REAL CARBON FIBER SHEET - Made of pure carbon fiber material, without any fillers/composite layers, ARRIS carbon fibre sheet features super stiff, sturdy, lightweight, and sustained, will not tear or rip easily, and easy to cut with a saw or water jet without crumbs being created, and do some amazing DIY jobs easily.
- MULTIPLE VARIATION - ARRIS offers both plain glossy and twill matt finish carbon fiber pannel sheets with sizes ranging from 300x300mm, 300x400mm and 400x500mm and comes in 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 6mm thickness. We also have other size from 150x200mm to 600x600mm available in our store. If you looking for other custom size, we can also tailored one for you.
- HIGH QUALITY, LIGHTWEIGHT & HIGH STRENGTH -The ARRIS 3k carbon fiber with 3000 filaments is strong, yet lightweight as it is filled in each tow or bundle. Compared with steel plates, the quality of carbon fiber plates is only 1/4 of that of steel plates, but its strength is 7 to 9 times that of steel. Whether you're building a drone or a high-performance sports car, these sheet of carbon fiber will help reduce weight and improve performance.
- WIDELY APPLICATION - ARRIS real carbon fiber sheets find wide-ranging applications across industries such as aerospace, automotive, robotics, and DIY projects. Ideal for RC airplanes, drones, helicopters, car exteriors and interiors, cellphone and laptop components, CNC engraving, cutting, milling, as well as backing plates, dash filler plates, gearshifts, instrument panels.
- ARRIS is committed to delivering premium carbon fiber products and unparalleled customer service. We focus on providing top-quality, high-performance products backed by comprehensive after-sales support. With our 60-day return policy, you can trust ARRIS for top-quality carbon fiber products and superior customer care.
- See more on Amazon...
Brand: ARRIS | Manufacturer: Hobby Wing
See On Amazon #18
300 X 400 X 3 MM Carbon Fiber Sheets 100% 3K Twill Matte Carbon Fiber Plate
Asin: B08SHQ8XNH | Model: GY0612 | PartNumber: GY0612 | Ean: 0713806271139 | UPC: 713806271139
3K Carbon Fiber Cloth - This 3K Carbon Fiber With 3000 Filaments Is Strong, Yet Lightweight As It Is Filled In Each Tow Or Bundle..
100% Satisfaction - A Wonderful Service Will Be Provided After Contacting Us If You Are Have Questions With Our Carbon Fiber Sheets..
Wide Application - Accessories For Kite Or Airplane Models, Car Exteriors And Interiors Surfaces, Car Door Handles, Cellphone, Laptop, Drones, Etc..
100% Real Carbon Fiber - High-Quality Carbon Fiber Materials Texture Which Is Durable And Not Easy To Tear..
Features
- Twill Weave - This carbon fiber is twill weave with matte surface that conforms easier.
- 100% Real Carbon Fiber - High-quality carbon fiber materials texture which is durable and not easy to tear.
- 3k Carbon Fiber Cloth - This 3k carbon fiber with 3000 filaments is strong, yet lightweight as it is filled in each tow or bundle.
- Wide Application - Accessories for kite or airplane models, car exteriors and interiors surfaces, car door handles, cellphone, laptop, drones, etc.
- 100% Satisfaction - A wonderful service will be provided after contacting us if you are have questions with our carbon fiber sheets.
- See more on Amazon...
Brand: Cisture | Manufacturer: Cisture
See On Amazon #19
cncarbonfiber 4pcs 6.0mm Square Carbon Fiber Rods 6.0x6.0x420mm,Solid Carbon Fiber Square Tube(pultrusion) Side 6.0mm Length 420mm,1.42346mm Available
Asin: B09417J2Q5 | Model: carbon-square-rod6.0mm | PartNumber: carbon-square-rod6.0mm | Ean: 0735279176940 | UPC: 735279176940
Weight: 22.2G/Pcs.
Package:4 Pcs.
High Strength,Lightweight.
Side:6.0Mm; Length: 420Mm.
Features
- Material:100% carbon Fiber
- Side:6.0mm; Length: 420mm
- Weight: 22.2g/pcs
- High strength,lightweight
- Package:4 pcs
- See more on Amazon...
Brand: cncarbonfiber | Manufacturer: cncarbonfiber
See On Amazon #20
cncarbonfiber M3 Stainless Carbon Steel Self clinched Clinching Rivet Nut Fastener 30pcs/Pack M3 Carbon Steel Press nut
Asin: B09N3ZFF3N | Model: M3/30p | PartNumber: M3/30p | Ean: 0702401781648 | UPC: 702401781648
Thread Diameter: M3, Suitable For Carbon Fiber Sheet.
Used For Drone Brushless Gimbal Frame.
Package:30Pcs.
Material: Carbon Steel.
Features
- M3 Self Clinching Nut
- Material: carbon steel
- Thread Diameter: M3, suitable for carbon fiber sheet
- Package:30pcs
- used for drone brushless gimbal frame
- See more on Amazon...
Brand: cncarbonfiber | Manufacturer: cncarbonfiber
See On Amazon
Looking For Something Else?
Search