Woodworking Lathe Headstock Spindle Adapter 1" x 8TPI to 3/4" x 16TPI,Hard Steel Material
Asin: B09CYJ34FD | Ean: 0760587456613 | UPC: 760587456613
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Convert A 1"X8 Tpi Lathe Headstock Spindle To 3/4" X 16Tpi..
The Weight Of The Adapter Is 0.57Lb. The Length Is 2.36" And The Width Is 1.5". This Will Extend The Spindle Length By Approximately 1-1/2"..
The Adapter Body Is Made Of Hard Steel. Greatly Extend The Service Life..
Install The External Thread Of The Chuck: 3/4" X 16Tpi..
Features
- Install the internal thread of the spindle: 1"x8 TPI.
- Install the external thread of the chuck: 3/4 x 16TPI.
- Convert a 1x8 TPI lathe headstock spindle to 3/4 x 16TPI.
- The adapter body is made of hard steel. Greatly extend the service life.
- The weight of the adapter is 0.57LB. The length is 2.36 and the width is 1.5. This will extend the spindle length by approximately 1-1/2.
- See more on Amazon...
Brand: U/D | Manufacturer: PNBO
See On Amazon Similar To Woodworking Lathe Headstock Spindle Adapter
#1
VINWOX SCR4-4 Wood Lathe Chuck, 4-Jaw Self-Centering Chuck, with 1"x8TPI thread & 3/4"x16TPI Adapter, 3 Years Warranty
Asin: B088BCMLT7 | Model: SCR4-4 | PartNumber: SCR4-4 | Ean: 0617748908194 | UPC: 617748908194
✅4" Sturdy Steel Body With Electric Plating For Long Term Anti-Rust Performance. Both Sides Of Jaw Teeth And Guides Are Ground And Hardened For Long And Stable Service Life. All Guideways And Bearing Surfaces Are Precisely Machined.
✅Stable Service And Long Life: Vinwox Gear Chuck Made From High Grade K1045 Steel Machined To Allow Closest Tolerances Is With Electric Plating For Long Term Anti-Rust Performance. Both Sides Of Jaw Teeth And Guides Are Ground, All Guideways And Bearing Surfaces Are Precisely Machined For Stable Service And Long Life.
✅Scroll Chuck Perfect For Holding Bowls, Spindles, And Other Unwieldy Wood Lathe Projects. Widely Used For Machine Tools And Accessories For General Lathes And Industrial Machines.
✅Internal Jaws Tighten Around Workpieces Varying From 1-1/2" To 3" (Or 3" Square Block). External Jaws Spread Inside Of Workpieces With Pilot Holes Ranging From 2" To 3-5/8" Included Screw Chuck Provides Even More Options For Supporting Your Projects.
Features
- Products include: Included Chuck body, a set of Tightening Levers, T allen wrench, Screw chuck, adapter converts 1'' x 8TPI to 3/4" x 16TPI and Free Automatic Spring Loaded Center Punch, MAKE SURE check your wood lathe FIT first.
- Internal jaws tighten around workpieces varying from 1-1/2 to 3 (or 3 Square Block). External jaws spread inside of workpieces with pilot holes ranging from 2 to 3-5/8 Included screw chuck provides even more options for supporting your projects
- 4 sturdy steel body with electric plating for long term anti-rust performance. Both sides of jaw teeth and guides are ground and hardened for long and stable service life. All guideways and bearing surfaces are precisely machined
- Scroll chuck perfect for holding bowls, spindles, and other unwieldy wood lathe projects. Widely used for machine tools and accessories for general lathes and industrial machines
- Stable Service and Long Life: VINWOX Gear Chuck made from high grade K1045 steel machined to allow closest tolerances is with electric plating for long term anti-rust performance. Both sides of jaw teeth and guides are ground, all guideways and bearing surfaces are precisely machined for stable service and long life
- See more on Amazon...
Brand: VINWOX | Manufacturer: VINWOX
See On Amazon #2
WEN LA4444 4-Inch 4-Jaw Self-Centering Chuck Set with 1-Inch x 8TPI Thread
Asin: B07PYFNFP3 | Model: LA4444 | PartNumber: LA4444 | Ean: 0044459990925 | UPC: 044459990925
External Jaws Spread Inside Of Workpieces With Pilot Holes Ranging From 2 To 3.2 Inches.
Features A 1” X 8 Tpi Thread For Compatibility With The Majority Of Wood Lathes On The Market.
Included Screw Chuck Provides Even More Options For Supporting Your Projects.
Internal Jaws Tighten Around Workpieces Varying From 1.6 To 2.8 Inches In Size.
Features
- Scroll chuck perfect for holding bowls, spindles, and other unwieldy wood lathe projects
- Internal jaws tighten around workpieces varying from 1.6 to 2.8 inches in size
- External jaws spread inside of workpieces with pilot holes ranging from 2 to 3.2 inches
- Included screw chuck provides even more options for supporting your projects
- Features a 1 x 8 TPI thread for compatibility with the majority of wood lathes on the market
- See more on Amazon...
Brand: WEN | Manufacturer: WEN
Weight: 0.00 pounds
See On Amazon #3
JWGJW 120034 Mini Lathe Quick Change Tool Post,Lathe Tool Holder,Axa Tool Holder
Asin: B018QMTXB0 | Model: 120034 | PartNumber: 120034 | Ean: 0703341919863, 0798154089902 | UPC: 703341919863, 798154089902
【 Scope Of Application 】 With A Dial, Each Tool Holder Can Rotate At Multiple Angles Of 9 ° Or 9 °. With The Use Of Extended Unit Operation, Various Angle Workpieces Can Be Processed, Which Can Be Used For Cylinder, Slotting, Cutting, Knurling, Drilling, Reaming, And Other Processing. Suitable For Small Lathes And Micro Lathes Such As 7X10, 7X12, 7X14, 7X16, And 9X16 "..
Note: This Tool Is Suitable For Diy Mini Lathes, Micro Lathes, And Small Lathes..
【 Product Packaging】 1X A Dovetail Tenon, 1X 3/8" Boring Bar Holder, 1X 0.2" Capacity Cut-Off Blade Holder, 2X 1/2" Turning & Facing Holders, 2X Mounting Bolts (M8 & M10), 2X Allen Key..
【 Product Quality 】: The Quick Replacement Tool Holder Is Composed Of Anodized Aluminum Oxide And Black Steel, With A Wedge-Shaped Tool Holder Design That Is Easy To Center, And All Working Parts Are Precision Ground And Hardened. The Positioning Accuracy Of The Tool Holder Replacement Is High, And The Reset Accuracy Is Within The Range Of 0.002Mm.
Features
- Product Description : This is a mini tool holder used to fix the cutting tool, which is installed on the lathe through a dovetail tenon.
- Product Quality : The quick replacement tool holder is composed of anodized aluminum oxide and black steel, with a wedge-shaped tool holder design that is easy to center, and all working parts are precision ground and hardened. The positioning accuracy of the tool holder replacement is high, and the reset accuracy is within the range of 0.002mm
- Scope of Application With a dial, each tool holder can rotate at multiple angles of 9 or 9 . With the use of extended unit operation, various angle workpieces can be processed, which can be used for cylinder, slotting, cutting, knurling, drilling, reaming, and other processing. Suitable for small lathes and micro lathes such as 7x10, 7x12, 7x14, 7x16, and 9x16 .
- Product Packaging 1x a dovetail tenon, 1x 3/8 boring bar holder, 1x 0.2 capacity cut-off blade holder, 2x 1/2 turning & facing holders, 2x Mounting bolts (M8 & M10), 2x Allen Key.
- Note: This tool is suitable for DIY mini lathes, micro lathes, and small lathes.
- See more on Amazon...
Brand: JWGJW | Manufacturer: JINWEN
Dimensions: 0.28 x 0.79 x 0.79 inches | Weight: 1.40 Pounds
See On Amazon #4
Indexable Lathe Turning Tool 21Pcs Kit 1/2'' 12mm Shank 7 Pcs Metal Lathe Tool Holder Set with 14 Pcs Turning Inserts for Turning Grooving Threading Boring Carbide Inserts Carbide Turning Tool
Asin: B0C6LQYMC1 | Model: 7pcs 1/2'' 12mm Shanks+14pcs Inserts | PartNumber: 7pcs 1/2'' 12mm Shanks+14pcs Inserts | Ean: 0669416192565 | UPC: 669416192565
Achieve Precision Machining: Elevate Your Projects With Our 21Pcs Indexable Lathe Turning Tool Set, 7 Holders And 14 Inserts. Enjoy Seamless, High-Precision Cutting, Whether You're A Pro Or A Diy Enthusiast..
Durable And Customer-Centric: Our Turning Tool Holders Are Shock-Proof, User-Friendly, And Backed By A Satisfaction Guarantee. Achieve Your Machining Goals With Ease, And We're Here To Assist You. We Provide 24H Support, 3Months Refund, 360Days Warranty. Don't Hesitate–Get Yours Now!.
Versatile Inserts For All Materials: Our Carbide Inserts With Cvd Coating Tackle Stainless Steel, Steel, And More. Experience Sturdy, Wear-Resistant, And Smooth Cutting In All Your Projects..
Precision Cutting, Every Angle Covered: With 7 Different Angles, Achieve Perfection Effortlessly. Turn Your Ideas Into Reality With Confidence Using Our Meticulously Designed Tools..
Top-Notch Quality For Endurance: Crafted From Cemented Carbide And Tungsten Steel, Our Turning Holders Offer Superior Hardness And Speed. No More Constant Tool Changes–These Tools Are Built To Last..
All-In-One Machining Solution: We're Your Go-To Universal Toolkit For Precision Turning. Each Package Includes Seven Essential Products: Snr0012m11, S12m-Sclcr06, Sdncn1212h07, Ser1212h16, Sdjcr1212h07, Sclcr1212h06, Mgeher1212-2. No Matter The Project, You'll Have The Right Tool At Your Fingertips..
Features
- Patent Pending Our tool design is innovative and our parent company is currently applying for patent protection. Any unauthorized copying or imitation will be subject to legal sanctions. If any infringement is discovered, we will take all necessary measures to safeguard our rights.
- All-in-One Machining Solution: We're your go-to universal toolkit for precision turning. Each package includes seven essential products: SNR0012M11, S12M-SCLCR06, SDNCN1212H07, SER1212H16, SDJCR1212H07, SCLCR1212H06, MGEHER1212-2. No matter the project, you'll have the right tool at your fingertips.
- Achieve Precision Machining: Elevate your projects with our 21pcs Indexable Lathe Turning Tool Set, 7 holders and 14 inserts. Enjoy seamless, high-precision cutting, whether you're a pro or a DIY enthusiast.
- Top-Notch Quality for Endurance: Crafted from cemented carbide and tungsten steel, our turning holders offer superior hardness and speed. No more constant tool changes these tools are built to last.
- Versatile Inserts for All Materials: Our carbide inserts with CVD coating tackle stainless steel, steel, and more. Experience sturdy, wear-resistant, and smooth cutting in all your projects.
- Precision Cutting, Every Angle Covered: With 7 different angles, achieve perfection effortlessly. Turn your ideas into reality with confidence using our meticulously designed tools.
- Durable and Customer-Centric: Our turning tool holders are shock-proof, user-friendly, and backed by a satisfaction guarantee. Achieve your machining goals with ease, and we're here to assist you. We provide 24h support, 3months refund, 360days warranty. Don't hesitate get yours now!
- See more on Amazon...
Brand: Joogto | Manufacturer: Joogto
Dimensions: 7.00 x 4.50 x 4.00 inches
See On Amazon #5
VINWOX 4" Wood Lathe Steel Faceplate, 1 x8TPI Spindle Thread Woodworking Machine Chuck Face Plate
Asin: B0C8N2BMLW | Model: FCPT-4-0108 | PartNumber: FCPT-4-0108 | Ean: 0769293700607 | UPC: 769293700607
Mounting Holes On The Plate, Easy Installation Of The Workpiece.
Stable Service And Long Life.
Faceplate Is Suitable For Lathe With 1”X8tpi Spindle Thread.
4" Diameter, 1”X8tpi Thread.
Features
- Made of Alloy Steel, Heavy and Rigid
- 4 Diameter, 1 x8TPI Thread
- Mounting holes on the plate, easy installation of the workpiece
- Faceplate is suitable for lathe with 1 x8TPI Spindle Thread
- Stable Service and Long Life
- See more on Amazon...
Brand: VINWOX | Manufacturer: VINWOX
See On Amazon #6
PSI Woodworking Products TM32 1/2-Inch Drill Chuck with #2 Morse Taper Arbor (1/2" 2MT)
Asin: B004CVJC20 | Model: TM32 | PartNumber: TM32 | Ean: 7241870660687, 0798167749176, 7566908051184, 0718122018208, 5272003698286 | UPC: 718122018208, 798167749176
The #2Mt Arbor Accepts 1/4" X 20Tpi Draw Bolt; Draw Bolt Not Included.
Great For Holding Drill Bits, Small Turnings, Dowels, Pen Mandrel Shafts, And Much More.
Removes Easily With Knock Out Bar.
This 3-Jaw Chuck Will Mount Into The Headstock Or Tailstock Of Any Lathe That Accepts #2Mt Accessories.
Features
- Includes the 1/2" Drill Chuck, #2 Morse Taper Arbor, and Jaw Tightening Key
- This 3-Jaw Chuck will mount into the headstock or tailstock of any lathe that accepts #2MT accessories
- The #2MT Arbor accepts 1/4 x 20tpi draw bolt; Draw bolt not included
- Removes easily with knock out bar
- Great for holding drill bits, small turnings, dowels, pen mandrel shafts, and much more
- See more on Amazon...
Brand: PSI Woodworking | Manufacturer: PSI Woodworking
Warranty: 2 Years Under Normal Use
See On Amazon #7
Diraeen 35Pcs Tungsten Carbide Cutters Inserts Set,Lathe Tools for Wood Lathe Turning Tools,Supplied with Screws and Screwdriver
Asin: B0C56QRJTB | Model: 35PCS | PartNumber: 35PCS
【3 Screwdrivers And 16 Screws】 The Tungsten Cutting Tool Blade Comes With Multiple Screwdrivers And Screws. Fully Equipped And Easy To Replace.
【High-Quality After-Sales Service】If You Are Not Satisfied With The Product At Any Time Within 1 Years After Purchase, We Will Provide A Refund Or Replacement. Package Included: 4*Square (11 X 11 Mm), 4*Diamond (30 X 10 Mm), 4* Round (Diameter 12 X 2.5 Mm) , 4*Round (Diameter 8.9 X 1.85 Mm), 16* Screws, 3*Screwdriver.
【Fits For Wood Lathe Turning Tools】This Combination Carbide Insert Kit Works Perfectly With Our Wood Lathe Turning Tools Kit.Meet The Requirements Of Rough Machining And Finishing Combination.
【Solid Tungsten Steel】All Of The Carbide Lathe Tools Replacement Inserts Are Made Of Quality Solid Tungsten Steel. Super Sharp And Durable, Long Lasting And Reliable, Hard To Break Or Deform, Providing You With Nice Use Experiences For A Long Time.
Features
- Carbide Lathe Tools Replacement Tips with Screws and Screwdriver Fits For Most Size 11 mm Square with Radius, 12 mm and 8.9 mm Round, 30 x 10 mm Diamond
- Solid Tungsten Steel All of the carbide lathe tools replacement inserts are made of quality solid tungsten steel. Super sharp and durable, long lasting and reliable, hard to break or deform, providing you with nice use experiences for a long time
- 3 screwdrivers and 16 screws The tungsten cutting tool blade comes with multiple screwdrivers and screws. Fully equipped and easy to replace
- Fits for wood lathe turning tools This combination carbide insert kit works perfectly with our wood lathe turning tools kit.Meet the requirements of rough machining and finishing combination
- High-quality after-sales service If you are not satisfied with the product at any time within 1 years after purchase, we will provide a refund or replacement. Package included: 4*Square (11 x 11 mm), 4*Diamond (30 x 10 mm), 4* Round (diameter 12 x 2.5 mm) , 4*Round (diameter 8.9 x 1.85 mm), 16* Screws, 3*Screwdriver
- See more on Amazon...
Brand: Diraeen | Manufacturer: DIRAEEN
See On Amazon #8
VINWOX 8 PCS Carbide Wood Lathe Turning Tool Set, Carbide Lathe Turning Tool, Including Swan Neck Hollower, Rougher, Finisher, Detailer, Pen Turning tools, Aluminum Alloy Handles from 14" to 29"
Asin: B0CG61QPF3 | Model: wood chisel-4pcs ALU Handle | PartNumber: wood chisel-4pcs ALU Handle | Ean: 0769293700683 | UPC: 769293700683
✅The Length Of The Shank Inserted Into The Handle Is Adjustable According To Your Need On Turning Reach..
✅Simply More Turning & Long Lasting, Say Good-Bye To Sharpening Tools. Top Quality And Long Cutting Life Guaranteed..
✅Detailer With 28X10mm Carbide Tip And 3/8”X3/8” (10X10mm) Tool Shank Make Final Touch On Small Beads Or Coves, Terrific On Chuck Tenons..
✅Including One Set Carbide Tip Insert Installed On Chisel..
✅Square Rougher With 11X11x2mm Carbide Tip And 3/8”X3/8” (10X10mm) Tool Shank Removes Bulk Fast And Efficiently, Terrific On Cutting Hard Materials..
✅Round Finisher With Ø12 Mm Carbide Tip And 3/8”X3/8” (10X10mm) Tool Shank Make Finishing Fast And Efficiently, Terrific Scraping Workout..
✅Swan Neck Hollower With Ø9x1.8Mm Carbide Tip And 3/4”X3/8” (19X10mm) Thick Polished Solid Swan Neck Toolbar Features With Sturdy Turning Feeling Whenever You Start Turning, Perfect Turning On All Inside Holes! Remember 29” Extra Long Handle Is Important On Hollowing Projects..
✅Two Pieces Aluminum Alloy Handles, The Normal Rod Connected To The Carbide Toolbar, The Extended Rod Can Be Screwed Onto The Normal Rod, Flexible Tool Length From 14“ To 29”.
✅All Tool Bars, From 3/4”X3/8” Swan Neck Toolbar To 3/8”X3/8” Regular Rougher/Finisher/Detailer Toolbars Are Fully Polished For Most Smooth Sliding On Tool Rest For Each Workpiece..
Features
- The VINWOX Carbide Turning Tools are Designed with Ease of Use in Mind. It is Ideal for Wood Turners of All Skill Levels and Helps Ensure Success Right From the Start. The VINWOX Carbide Turning Tools Eliminate the Need for Sharpening of Your Turning Tools Since It Features a Rotatable Cutter Head.
- All Tool Bars, from 3/4 x3/8 Swan Neck Toolbar to 3/8 x3/8 Regular Rougher/Finisher/Detailer Toolbars are Fully Polished for Most Smooth Sliding on Tool Rest for Each Workpiece.
- The Length of the Shank Inserted into the Handle is Adjustable According to Your Need on Turning Reach.
- SWAN NECK HOLLOWER with 9x1.8mm Carbide Tip and 3/4 x3/8 (19x10mm) Thick Polished Solid Swan Neck Toolbar Features with Sturdy Turning Feeling Whenever You Start Turning, Perfect Turning on All Inside Holes! Remember 29 Extra Long Handle is Important on Hollowing Projects.
- SQUARE ROUGHER with 11x11x2mm Carbide Tip and 3/8 x3/8 (10x10mm) Tool Shank Removes Bulk Fast and Efficiently, Terrific on Cutting Hard Materials.
- ROUND FINISHER with 12 MM Carbide Tip and 3/8 x3/8 (10x10mm) Tool Shank Make Finishing Fast and Efficiently, Terrific Scraping Workout.
- DETAILER with 28x10mm Carbide Tip and 3/8 x3/8 (10x10mm) Tool Shank Make Final Touch on Small Beads or Coves, Terrific on Chuck Tenons.
- Including One Set Carbide Tip Insert Installed on Chisel.
- Two Pieces Aluminum Alloy Handles, the Normal Rod Connected to the Carbide Toolbar, the Extended Rod Can Be Screwed onto the Normal Rod, Flexible Tool Length from 14 to 29
- Simply More Turning & Long Lasting, SAY Good-bye to Sharpening tools. Top quality and Long cutting life Guaranteed.
- See more on Amazon...
Brand: VINWOX | Manufacturer: VINWOX
See On Amazon #9
Vevor Lathe Chisel 8 Piece Wood Lathe Chisel Cutting Carving HSS Steel Blades Wood Turning Tools Lathe Chisel Set Wooden Case for Storage for Wood Turning Hardwood One Free Chisel - Amazon.com
Asin: B07YDSXWTY | Model: Lathe Chisel 8 Piece Wood Lathe Chisel | PartNumber: Lathe Chisel 8 Piece Wood Lathe Chisel | Ean: 0768558006249 | UPC: 768558006249
【Safe Brass Ferrules】- High Speed Steel Blades Are Tightly Connected To The Handle By Durable Brass Ferrules, Easuring Chisels' Safety And Reliability While Working..
【Attractive Wood Tool Box】- A Wooden Case For Easy Storage And Transportation. Compact Design. Foam Bases To Protect Wood Chisel Sets From Any Damage. .
【Reliable & Sturdy】- Solid Wood Material Handles. Ergonomics Design Offers It More Comfortable While Doing Turning Job. Each Tool Handle Is Beautifully Turned Hardwood That Are Approximately 9.06"(23Cm) Long..
【8 Pcs Chisels Set】- Chisels Range In Overall Length Is About 16.14" (41Cm). The Lathe Tools Includes 8 Essential Chisels: 1X Inch Parting Tool, 1X Spear Scraper, 1X Skew Chisel, 1X Inch Skew Chisel, 1X Inch Round Nose Scraper, 1X Inch Bowl Gouge, 1X Inch Spindle Gouge, 1X Inch Roughing Gouge. One Free 5/8" Chisel For You..
Features
- SOLID BLADES DESIGN - The lathe chisels are made from high speed steel, featuring shrill edge and fine grinding. Durable and accurate design. Blades is about about 6.50" (16.5cm).
- 8 PCS CHISELS SET - Chisels range in overall length is about 16.14 (41cm). The lathe tools includes 8 essential chisels: 1x inch parting tool, 1x spear scraper, 1x skew chisel, 1x inch skew chisel, 1x inch round nose scraper, 1x inch bowl gouge, 1x inch spindle gouge, 1x inch roughing gouge. One free 5/8 chisel for you.
- SAFE BRASS FERRULES - High speed steel blades are tightly connected to the handle by durable brass ferrules, easuring chisels' safety and reliability while working.
- RELIABLE & STURDY - Solid wood material handles. Ergonomics design offers it more comfortable while doing turning job. Each tool handle is beautifully turned hardwood that are approximately 9.06(23cm) long.
- ATTRACTIVE WOOD TOOL BOX - A wooden case for easy storage and transportation. Compact design. Foam bases to protect wood chisel sets from any damage.
- See more on Amazon...
Brand: Vevor | Manufacturer: Mophorn
Dimensions: 2.40 x 18.90 x 13.00 Inches | Weight: 7.00 Pounds
See On Amazon #10
PNBO Woodworking Lathe Headstock Spindle Adapter, Converts 1-1/4" x 8TPI to 1" x 8TPI
Asin: B08S7TX99R | Model: 1 | PartNumber: 1 | Ean: 0744337232887 | UPC: 744337232887
✅Convert A 1-1/4" X 8Tpi Lathe Headstock Spindle To 1" X 8Tpi..
✅The Weight Of The Adapter Is 1.34Lb. The Length Is 2.75" And The Width Is 2.1". This Will Extend The Spindle Length By Approximately 1-1/2"..
✅The Adapter Body Is Made Of Hard Steel. Greatly Extend The Service Life..
✅Install The External Thread Of The Chuck: 1" X 8 Tpi..
Features
- Install the internal thread of the spindle: 1 1/4" x 8 TPI.
- Install the external thread of the chuck: 1 x 8 TPI.
- Convert a 1-1/4 x 8TPI lathe headstock spindle to 1 x 8TPI.
- The adapter body is made of hard steel. Greatly extend the service life.
- The weight of the adapter is 1.34LB. The length is 2.75 and the width is 2.1. This will extend the spindle length by approximately 1-1/2.
- See more on Amazon...
Brand: PNBO | Manufacturer: PNBO
See On Amazon #11
PSI Woodworking LCENT3210 Super 4-Prong Spring-Loaded Drive Center #2MT
Asin: B01MA26GPP | Model: LCENT3210 | PartNumber: LCENT3210 | Ean: 0718122015306 | UPC: 718122015306
Spring-Loaded Center Point Simplifies Positioning Of Your Spindle.
Spring-Loaded Center Point Helps Avoid Splitting Your Work Piece.
Spring-Loaded Center Point Retracts When Tailstock Pressure Is Applied.
Sharp Spurs Give A Strong Bite Into Wood Work Piece.
Features
- 1" Diameter with #2MT
- Sharp spurs give a strong bite into wood work piece
- Spring-loaded center point simplifies positioning of your spindle
- Spring-loaded center point retracts when tailstock pressure is applied
- Spring-loaded center point helps avoid splitting your work piece
- See more on Amazon...
Brand: PSI Woodworking | Manufacturer: PSI Woodworking Products
Dimensions: 1.00 x 4.00 x 1.00 inches | Weight: 0.45 pounds
Warranty: 2 years with normal use
See On Amazon #12
3" Wood Lathe Steel Faceplate Chucks, 1 -8TPI Thread Woodworking Accessories Tools
Asin: B0946PVZXB | Model: FP-3-1INCH8TPI | PartNumber: FP-3-1INCH8TPI | Ean: 0725216447370 | UPC: 725216447370
8 Mounting Holes On The Plate, Easy Installation Of The Workpiece.
Diameter Of Mounting Hole:15/64".
There Is A Flat-Cut Surface On The Tail Tube And It Can Be Easily Removed From The Lathe.
3" Diameter.
Features
- Made of Steel,Heavy and Rigid,1"-8TPI Thread Size
- 3 Diameter
- 8 mounting holes on the plate, easy installation of the workpiece
- There is a flat-cut surface on the tail tube and it can be easily removed from the lathe
- Diameter of mounting hole:15/64
- See more on Amazon...
Brand: PHUKIMLONG | Manufacturer: Phukimlong Woodworking
See On Amazon #13
Carbide Tipped Wood Turning Tools Set, Latest Lathe Rougher Finisher Swan Neck Hollowing Tools and Interchangeable Aluminum Alloy Grip Handle with Diamond Round Square Carbide Inserts
Asin: B08MBRPX3Z | Model: mugongju001 | PartNumber: mugongju001 | Ean: 0799117405289 | UPC: 799117405289
Indexable Cutter Design – Indexable Carbide Cutter Inserts Can Be Rotated Or Replaced To Provide A Fresh Cutting Edge Whenever Needed, ( Click The "Aogbra Store" To Order Replace Carbide Cutter Inserts When You Need ).
Tool Details – Tool Shafts Are Cnc Machined From Square High Carbon Steel, Making Them Strong And Solid In The Hand. The Square Shaft Profile Helps Keep The Tool Flat On The Tool Rest And Level With The Floor, Making Them Less Likely Than Round Shaft Tools To Roll And Shift While On The Tool Rest..
Easy To Use – The Variable Length Shaft Design And Carbide Cutters Are Valuable To All Skill Levels Of Woodworkers. Carbide Cutters Allow Both Beginner And Experienced Turners To Quickly Start Projects By Reducing The Learning Curve Associated With Traditional Turning Tools..
Material - Tools Are Made With Tungsten Carbide Tips For Extended Cutter Life, Stainless Steel Arbor For Strength And Durability, And Aluminum Oxide Alloy Handles For Grip, Comfort, And Durability..
Features
- OUR TURNING SYSTEM INCLUDES - (1) 11'' Tool Handle, (1) 9.8'' Handle Extension, (3) Carbide Cutter Tool Shafts (Circle, Square, Diamond), (1) Swan neck Carbide Cutter Hollowing Tool, (1) T15 Wrench, (1) Allen Wrench, (1) Aluminum Protective Case With Foam Insert.
- MATERIAL - Tools are made with tungsten carbide tips for extended cutter life, stainless steel arbor for strength and durability, and aluminum oxide alloy handles for grip, comfort, and durability.
- INDEXABLE CUTTER DESIGN Indexable carbide cutter inserts can be rotated or replaced to provide a fresh cutting edge whenever needed, ( Click the Aogbra Store to order replace carbide cutter inserts when you need )
- EASY TO USE The variable length shaft design and carbide cutters are valuable to all skill levels of woodworkers. Carbide cutters allow both beginner and experienced turners to quickly start projects by reducing the learning curve associated with traditional turning tools.
- TOOL DETAILS Tool shafts are CNC machined from square high carbon steel, making them strong and solid in the hand. The square shaft profile helps keep the tool flat on the tool rest and level with the floor, making them less likely than round shaft tools to roll and shift while on the tool rest.
- See more on Amazon...
Brand: Aogbra | Manufacturer: Aogbra
See On Amazon #14
RHFGYY 5/8" Metal Lathe Cutting Tool Turning Tool Holder SRAPR1616H10 + 10pcs RCMT10T3 (R5) Carbide Turning Inserts Round Replacement Inserts for Lathe Tools
Asin: B09TZ3GV3W | Model: RHFGYY | PartNumber: RHFGYY | Ean: 0755738598038 | UPC: 755738598038
Type:Right Hand ,Screw Compression Type;.
Package Includes: 1X5/8" Tool Holder + 10Pcs Round Carbide Inserts (Boxed).
The Metal Lathe Cutting Tools Can Process Steel, Stainless Steel, Copper And Aluminum And Other Materials.;.
Tool Holder Is Black Oxidized Smooth Surface And Tool Hardness (Hrc 50 Degrees Up And Down) And Precision Are Up To The First Grade;.
Features
- RCMT10T3MO (R5) Round milling inserts: made of solid carbide with mutilayer coated, high finish and high wear resistance;
- Tool Holder is Black Oxidized Smooth Surface and Tool Hardness (HRC 50 degrees up and down) and Precision Are Up To The First Grade;
- Type:Right hand ,Screw compression type;
- The metal lathe cutting tools can Process Steel, Stainless Steel, Copper and Aluminum and Other Materials.;
- Package includes: 1x5/8 tool holder + 10pcs Round Carbide Inserts (Boxed)
- See more on Amazon...
Brand: RHFGYY | Manufacturer: RHFGYY
See On Amazon #15
DEEFIINE Carbide Tip Wood Lathe Turning Tool set With Bowl sander, Lathe Roughing and Finishing Hollowing Tool Interchangeable Aluminum Alloy Handle with 4pcs Carbide Blade For Woodturning
Asin: B0CDRGBBJ1 | Model: WTT060402BS-C | PartNumber: WTT060402BS-C
【Wood Turning Tool Kit】The High-Quality Cnc Machining Made Of Square Stainless Steel Makes It Stronger, Harder And Rolls Less Than Round Shaft Tools. It Has A Square Shaft So That The Knife Can Be Used With A Flat Back. Keep The Shelf Flat And Flush With The Floor。.
【Ergonomic Design】 The Turning Tool Is Equipped With 1Pcs Frosted Handle That Fits Comfortably In The Hand. In Addition, It Is Equipped With An Extension Handle That Can Be Used In Deeper Scenes, Aluminium Oxide Alloy Handles For Grip, Comfort And Durability. Making It A Safe Choice.If You Need More Grip Handles.Please Visit The Deefiine Store,Many Products For You To Choose..
【Rotary Cutter Design】 The Indexable Carbide Tool Blade Can Be Rotated Or Replaced To Provide New Cutting Edge When Needed.If You Need More Carbide Cutters.Please Visit The Deefiine Store,Many Products For You To Choose..
【Sharp And Easy】 Our Carbide Turning Tools Set Can Be Used To Quickly Process Any Workpiece On Your Lathe. The Wood Lathe Tool Set Can Provide A Smooth And Clean Cutting Effect By Four Types Of Cutters Designed For Different Grinding Effects. This Saves A Lot Of Time When Grinding And Honing, Because You Can Easily Replace The Blade When It Becomes Dull..
Features
- New design Our wood turning tools set with bowl sander,Bowl sander is new design product with a patent.
- Sharp and easy Our carbide turning tools set can be used to quickly process any workpiece on your lathe. The wood lathe tool set can provide a smooth and clean cutting effect by four types of cutters designed for different grinding effects. This saves a lot of time when grinding and honing, because you can easily replace the blade when it becomes dull.
- wood turning Tool kit The high-quality CNC machining made of square stainless steel makes it stronger, harder and rolls less than round shaft tools. It has a square shaft so that the knife can be used with a flat back. Keep the shelf flat and flush with the floor
- Rotary cutter design the indexable carbide tool blade can be rotated or replaced to provide new cutting edge when needed.If you need more carbide cutters.Please visit the DEEFIINE store,many products for you to choose.
- Ergonomic design the turning tool is equipped with 1pcs frosted handle that fits comfortably in the hand. In addition, it is equipped with an extension handle that can be used in deeper scenes, aluminium oxide alloy handles for grip, comfort and durability. making it a safe choice.If you need more grip handles.Please visit the DEEFIINE store,many products for you to choose.
- See more on Amazon...
Brand: DEEFIINE | Manufacturer: DEEFIINE
Dimensions: 9.00 x 14.60 x 2.80 Inches
See On Amazon #16
33 Pieces Lathe Excircle Indexable Carbide Turning Tool Holder Bit Set MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 with 30 CNMG 431 + WNMG 431 + TNMG 331 Metal Indexable Carbide Turning Insert Blades
Asin: B092R2GLPH | Model: Honoson-916243 | PartNumber: Honoson-916243
Size: Diameter Of The Handle Is (5/8 X 5/8 Inches/ 16 X 16 Mm); Overall Length Is 3-7/8 Inch/ 100 Mm, Cutting Direction Is Right Hand; Applicable Machine Tool Is Lathe; Each Tool Holder Has A Black Oxidized Smooth Surface, And The Tool Hardness (Hrc Up And Down 48 Degrees) And Accuracy Have Reached The First Grade.
Note: Due To The Slight Color Change Of Manual Measurement And Different Display Settings, Please Allow A Difference Of 1-3 Cm; Due To The Difference Between Different Monitors, The Picture May Not Reflect The Actual Color Of The Item.
Easy To Store: Insert 30 Pieces Of Cemented Carbide Into 3 Boxes, And Put Them In A Plastic Container, Safe And Easy To Store, Compatible With Mtjnl1616h16, Mwlnl1616h08, Mclnl1616h12 Or Mtjnr1616h16, Mwlnr1616h08, Mclnr1616h12.
Material: Lathe Indexable Carbide Turning Tool Holders Are Made Of Quality Cemented Carbide And Tungsten Steel; The Cemented Carbide Material Makes The Turning Tool Durable And Adaptable; Indexable Carbide Turning Insert Blades Are Made Of Cemented Carbide And Use Pvd Coating, The Blade Has High Hardness, Low Friction Coefficient, Nice Wear Resistance And Chemical Stability.
Features
- Package: you will receive 3 pieces 5/8 inch lathe indexable carbide turning tool holders, 1 piece MTJNR1616H16, 1 piece MWLNR1616H08, 1 piece MWLNR1616H08, 3 pieces carbide inserts and 10 pieces CNMG 431,10 pieces WNMG 431, 10 pieces TNMG 331 metal indexable carbide turning insert blades, cufficient quantity and easy to replace
- Material: lathe indexable carbide turning tool holders are made of quality cemented carbide and tungsten steel; The cemented carbide material makes the turning tool durable and adaptable; Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade has high hardness, low friction coefficient, nice wear resistance and chemical stability
- Size: diameter of the handle is (5/8 x 5/8 inches/ 16 x 16 mm); Overall length is 3-7/8 inch/ 100 mm, cutting direction is right hand; Applicable machine tool is lathe; Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and accuracy have reached the first grade
- Easy to store: insert 30 pieces of cemented carbide into 3 boxes, and put them in a plastic container, safe and easy to store, compatible with MTJNL1616H16, MWLNL1616H08, MCLNL1616H12 or MTJNR1616H16, MWLNR1616H08, MCLNR1616H12
- Note: due to the slight color change of manual measurement and different display settings, please allow a difference of 1-3 cm; Due to the difference between different monitors, the picture may not reflect the actual color of the item
- See more on Amazon...
Brand: Honoson | Manufacturer: Honoson
See On Amazon #17
WEN LA432F 8-Inch Flat Lathe Chuck Jaws for Bowl Turning
Asin: B084XWJPQ7 | Model: LA432F | PartNumber: LA432F | Ean: 0044459992561 | UPC: 044459992561
Easily Adjust The Holding Diameter With The 6-Position Peg System.
Compatible With The Wen La4374 3. 75-Inch 4-Jaw Lathe Chuck.
Includes Eight 1/2-Inch Rubber Pins, Eight 3/4-Inch Rubber Pins, And 48 Mounting Holes.
Hold Round Workpieces Ranging From 2. 3 To 8. 3 Inches In Diameter.
Features
- Modify your current WEN lathe chuck to keep bowls properly secured
- Hold round workpieces ranging from 2. 3 to 8. 3 inches in diameter
- Easily adjust the holding diameter with the 6-position peg system
- Includes eight 1/2-inch rubber pins, eight 3/4-inch rubber pins, and 48 mounting holes
- Compatible with the WEN LA4374 3. 75-Inch 4-Jaw Lathe Chuck
- See more on Amazon...
Brand: WEN | Manufacturer: WEN
See On Amazon #18
WenCrew Carbide Tipped Wood Turning Tools Set, 2023 Upgrade Carbide Lathe Tools for Woodturning, Lathe Rougher Finisher Swan Neck Hollowing Tools with Extendable Shafts
Asin: B0BG4QT947 | Model: carbide lathe tools-01 | PartNumber: carbide lathe tools-01
▶▶▶ Simple Operateion : Carbide Wood Turning Tools Allow Both Beginner And Experienced Turners To Quickly Start Projects By Reducing The Learning Curve Associated With Traditional Turning Tools. And Our Wood Lathe Tools Bring You Outstanding Results, Ideal For Lathe Woodworking Or Diy Enthusiasts.
▶▶▶ Delicate & Portable Case: Convenient Storage And Carry. You Will Get 1* 11Inch Length Aluminum Lathe Tools Handle+ 1* 10Inch Length Handle Extension + 4* Carbide Tips +2*Tools; (4 Tips Included Round + Diamond+ Square + Hollower, 2 Tools Included T15 Wrench And Allen Wrench).
▶▶▶ Note: This Is A Handle + An Extension Rod, Not 2 Handles, If You Need Additional Replacable Handles Or Tips, Please Check The Accessory Variant Link, All Of Them Can Be Sold Separately, If You Couldn't Find The Relevant Link, Please Email Directly To Our Customer Service Staff, We Will Send The Asin To You.
▶▶▶ Fast Handle Switching: Excellent Reliable Ergonomics Grip Makes You Feel Comfortable And Light. Adjustable And Extendable Handle Support Freely Adjust The Length According To Your Preference. Wood Turning Tools Equipped With Tools To Adjust And Extend The Length, Easy And Flexible To Assemble And Disassemble.
▶▶▶ High Stability: High Performance Stainless Steel Arbor And Aluminum Oxide Handles Increase Stability And Shock Resistance. Better Shock Resistant Wood Turning Tools Will Ensure The Handle Will Not Loosen When Vibrating, Which Will Make You Get A Good Cutting Effect In Safe Operation(Heavy Duty Wood Turning Tools For Lathe Are Less Likely To Roll And Move On The Tool Holder Than Wood Tools).
Features
- SAY GOODBYE TO SHARPENING ANNOYANCE: Upgrade premium carbide lathe tools are made with Rotatable tungsten carbide tip with sharp edge. Once the edge becomes dull, you can always rotate the bit to get a new, sharper edge. Sharper & Luster Cutter can offer better strength and durability to helps maintain edge persistence, to avoid constant sharpening.
- HIGH STABILITY: High performance stainless steel arbor and aluminum oxide handles increase stability and shock resistance. Better shock resistant wood turning tools will ensure the handle will not loosen when vibrating, which will make you get a good cutting effect in safe operation(Heavy duty wood turning tools for lathe are less likely to roll and move on the tool holder than wood tools)
- SIMPLE OPERATEION : Carbide wood turning tools allow both beginner and experienced turners to quickly start projects by reducing the learning curve associated with traditional turning tools. And our wood lathe tools bring you outstanding results, Ideal for lathe woodworking or DIY enthusiasts
- FAST HANDLE SWITCHING: Excellent reliable ergonomics grip makes you feel comfortable and light. Adjustable and Extendable handle support freely adjust the length according to your preference. Wood turning tools equipped with tools to adjust and extend the length, easy and flexible to assemble and disassemble
- DELICATE & PORTABLE CASE: Convenient storage and carry. You will get 1* 11inch Length Aluminum lathe tools handle+ 1* 10inch Length Handle Extension + 4* Carbide Tips +2*Tools; (4 Tips included round + diamond+ square + hollower, 2 Tools included T15 wrench and allen wrench)
- NOTE: This is a handle + an extension rod, not 2 handles, if you need additional replacable handles or tips, please check the accessory variant link, all of them can be sold separately, if you couldn't find the relevant link, please email directly to our customer service staff, we will send the asin to you
- See more on Amazon...
Brand: WenCrew | Manufacturer: WenCrew
Dimensions: 0.10 x 5.00 x 2.00 Inches
See On Amazon #19
WEN PM01 Wooden Lathe Pen-Turning MT1 Mandrel
Asin: B072FR29X7 | Model: PM01 | PartNumber: PM01 | Ean: 0044459163015 | UPC: 044459163015
1/4-Inch Diameter Shaft (7Mm) Runs Through The Center Of The Workpiece.
Includes 5 Slimline Spacer Bushings.
Designed To Fit The Wen 3420 Wood Lathe.
Turn Pens, Pencils And More.
Features
- Tapered Morse maximizes compatibility with most MT1 wood lathes
- Turn pens, pencils and more
- 1/4-inch diameter shaft (7mm) runs through the center of the workpiece
- Designed to fit the WEN 3420 wood Lathe
- Includes 5 slimline SPACER bushings
- See more on Amazon...
Brand: WEN | Manufacturer: WEN
Dimensions: 3.10 x 11.80 x 3.10 inches | Weight: 0.75 Pounds
See On Amazon #20
MINI METAL LATHE TAIL STOCK DRILL CHUCK TOOL WITH MT2 MORSE TAPER ARBOR MT 2
Asin: B078917VWL | Ean: 0643845645007 | UPC: 643845645007
Mandrel Taper: Mt2.
Shank Length: 3 1/8".
Mandrel Material: 1010 Low Carbon Steel.
Mounting Holes: Jacobs Taper #33.
Features
- Capacity: 5/64'' to 1/2''
- Mounting holes: Jacobs taper #33
- Mandrel taper: MT2
- Mandrel material: 1010 low carbon steel
- Shank length: 3 1/8
- See more on Amazon...
Brand: vector tools | Manufacturer: J&R Quality Tools
Dimensions: 4.00 x 6.00 x 4.00 inches
See On Amazon
Looking For Something Else?
Search