uxcell 14mm Sintered Diamond Core Drill Bits Hole Saws, Dry or Wet Drilling for Brick Concrete Block Masonry Marble, for M10 Angle Grinder, 2 Pcs
Asin: B09F9DR4C4
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Fit For Angle Grinder: Easily Operate On The M10 Angle Grinder (Not Included Here). Or Need An Adapter For Drill Or Other Machine, Such As Hex, Round Shank Etc. (Not Included Here). Cannot Be Used On Impact Power Tools..
Notices: When Cutting Holes, It Needs To Be Positioned At An Angle Of 45 Degree And Make A Crescent-Shaped Trace On The Material. Then Cut Holes Vertically And Need To Be Cooled With Water..
Features: Large Clearance Hole Facilitates The Entrance Of Cooling Water And The Escape Of Chips And Other Particles From Drilling. Makes Drilling Process Much Easier..
Application: Can Be Dry Or Wet Drilling. To Prolong The Using Life, It Is Recommended To Be Used With Water For Cooling And Lubrication. Drill Accurate Holes On Concrete, Masonry, Hard Brick, Marble, Stone, Marble, Glass, Tile And Other Hard Materials..
Features
- Diamond Drill Bits: 14mm cutting diameter. Sintered diamond cutting edge contains diamond particles from inside to outside, to ensure that the edge is always sharp.
- Application: Can be dry or wet drilling. To prolong the using life, it is recommended to be used with water for cooling and lubrication. Drill accurate holes on concrete, masonry, hard brick, marble, stone, marble, glass, tile and other hard materials.
- Fit for Angle Grinder: Easily operate on the M10 Angle Grinder (not included here). Or need an adapter for drill or other machine, such as hex, round shank etc. (not included here). Cannot be used on impact power tools.
- Features: Large clearance hole facilitates the entrance of cooling water and the escape of chips and other particles from drilling. Makes drilling process much easier.
- Notices: When cutting holes, it needs to be positioned at an angle of 45 degree and make a crescent-shaped trace on the material. Then cut holes vertically and need to be cooled with water.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon Similar To uxcell 14mm Sintered Diamond Core
#1
uxcell Diamond Hole Saw Core Drill Bit, 14mm Diameter 1/4" Hex Shank Sintered Diamond Hole Cutter for Masonry Porcelain Tile Marble Stone
Asin: B09Z6P8HLM | Model: a22032400ux0602 | PartNumber: a22032400ux0602
Sintered Diamond: Diamond Grains Are Permanently Sintered To The Cutting Edge From Inside To Outside. Sintered Diamond Has The Sharpening Property But Electroplated Or Brazed Diamond Can Not Be Sharpened..
1/4 Inch Hex Shank: Quick Change 1/4 Inch Hex Shank Can Be Used On Power Tools More Easily And Securely. Fits Most Bench Drills, Hand Electric Drills. Tips: Reduced Drill Speeds, Low Drill Pressure And Increased Use Of Water Lubrication Will Extend Drill Bit Life Considerably..
Features: Large Clearance Hole Facilitates Entrance Of Cooling Water And Escape Of Chips And Other Particles From Drilling. Creates A Precision And Smooth Cut, Less Chipping And Minimizing Breakage..
Wide Applications: Suitable For Drilling Porcelain, Tile, Marble, Stone, Masonry, Brick, Glass. Can Be Dry Or Wet Use. It Is Recommended To Be Used With Water For Cooling And Lubrication To Prolong The Using Life And Increase The Performance..
Features
- Core Drill Bits: Drilling diameter: 14mm / 0.55"; hex shank size: 1/4"; working depth (max .): 43mm / 1.69"; total length: 73mm / 2.87". Provide high efficiency, fast and smooth drilling, but also ensure longer working life.
- Wide Applications: Suitable for drilling porcelain, tile, marble, stone, masonry, brick, glass. Can be dry or wet use. It is recommended to be used with water for cooling and lubrication to prolong the using life and increase the performance.
- Sintered Diamond: Diamond grains are permanently sintered to the cutting edge from inside to outside. Sintered diamond has the sharpening property but electroplated or brazed diamond can not be sharpened.
- Features: Large clearance hole facilitates entrance of cooling water and escape of chips and other particles from drilling. Creates a precision and smooth cut, less chipping and minimizing breakage.
- 1/4 Inch Hex Shank: Quick change 1/4 inch hex shank can be used on power tools more easily and securely. Fits most bench drills, hand electric drills. Tips: Reduced drill speeds, low drill pressure and increased use of water lubrication will extend drill bit life considerably.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #2
uxcell Diamond Hole Saw Core Drill Bit, 14mm Diameter 1/4" Hex Shank Sintered Diamond Hole Cutter for Masonry Porcelain Tile Marble Stone 2pcs
Asin: B09Z6NGYTR | Model: a22032400ux0603 | PartNumber: a22032400ux0603
Sintered Diamond: Diamond Grains Are Permanently Sintered To The Cutting Edge From Inside To Outside. Sintered Diamond Has The Sharpening Property But Electroplated Or Brazed Diamond Can Not Be Sharpened..
1/4 Inch Hex Shank: Quick Change 1/4 Inch Hex Shank Can Be Used On Power Tools More Easily And Securely. Fits Most Bench Drills, Hand Electric Drills. Tips: Reduced Drill Speeds, Low Drill Pressure And Increased Use Of Water Lubrication Will Extend Drill Bit Life Considerably..
Features: Large Clearance Hole Facilitates Entrance Of Cooling Water And Escape Of Chips And Other Particles From Drilling. Creates A Precision And Smooth Cut, Less Chipping And Minimizing Breakage..
Wide Applications: Suitable For Drilling Porcelain, Tile, Marble, Stone, Masonry, Brick, Glass. Can Be Dry Or Wet Use. It Is Recommended To Be Used With Water For Cooling And Lubrication To Prolong The Using Life And Increase The Performance..
Features
- Core Drill Bits: Drilling diameter: 14mm / 0.55"; hex shank size: 1/4"; working depth (max .): 43mm / 1.69"; total length: 73mm / 2.87". Provide high efficiency, fast and smooth drilling, but also ensure longer working life.
- Wide Applications: Suitable for drilling porcelain, tile, marble, stone, masonry, brick, glass. Can be dry or wet use. It is recommended to be used with water for cooling and lubrication to prolong the using life and increase the performance.
- Sintered Diamond: Diamond grains are permanently sintered to the cutting edge from inside to outside. Sintered diamond has the sharpening property but electroplated or brazed diamond can not be sharpened.
- Features: Large clearance hole facilitates entrance of cooling water and escape of chips and other particles from drilling. Creates a precision and smooth cut, less chipping and minimizing breakage.
- 1/4 Inch Hex Shank: Quick change 1/4 inch hex shank can be used on power tools more easily and securely. Fits most bench drills, hand electric drills. Tips: Reduced drill speeds, low drill pressure and increased use of water lubrication will extend drill bit life considerably.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #3
uxcell Sintered Diamond Core Drill Bits 14mm Hole Saws with M10 Arbor Adapter for Masonry Porcelain Tile Marble Concrete Stone Brick
Asin: B09QJ1Q9J6 | Model: a21121800ux0566 | PartNumber: a21121800ux0566
Wide Applications: Suitable For Drilling Porcelain, Tile, Marble, Stone, Masonry, Brick, Glass. Can Be Dry Or Wet Use. It Is Recommended To Be Used With Water For Cooling And Lubrication To Prolong The Using Life And Increase The Performance..
Arbor Adapter: The Adapter Converts M10 Thread To 3/8-Inch (9.5Mm) Triangle Shank. Fits Most Bench Drills, Hand Electric Drills. Tips: Reduced Drill Speeds, Low Drill Pressure And Increased Use Of Water Lubrication Will Extend Drill Bit Life Considerably..
Features: Large Clearance Hole Facilitates Entrance Of Cooling Water And Escape Of Chips And Other Particles From Drilling. Creates A Precision And Smooth Cut, Less Chipping And Minimizing Breakage..
Sintered Diamond: Diamond Grains Are Permanently Sintered To The Cutting Edge From Inside To Outside. Sintered Diamond Has The Sharpening Property But Electroplated Or Brazed Diamond Can Not Be Sharpened. Provide High Efficiency, Fast And Smooth Drilling, But Also Ensure Longer Working Life..
Features
- Core Drill Bits: Drilling Diameter: 14mm / 0.55"; Working Depth (Max .): 45mm / 1.77"; Female Thread Size: M10 x 1.5. Used on M10 angle grinders, easy to operate.
- Sintered Diamond: Diamond grains are permanently sintered to the cutting edge from inside to outside. Sintered diamond has the sharpening property but electroplated or brazed diamond can not be sharpened. Provide high efficiency, fast and smooth drilling, but also ensure longer working life.
- Wide Applications: Suitable for drilling porcelain, tile, marble, stone, masonry, brick, glass. Can be dry or wet use. It is recommended to be used with water for cooling and lubrication to prolong the using life and increase the performance.
- Features: Large clearance hole facilitates entrance of cooling water and escape of chips and other particles from drilling. Creates a precision and smooth cut, less chipping and minimizing breakage.
- Arbor Adapter: The adapter converts M10 thread to 3/8-inch (9.5mm) triangle shank. Fits most bench drills, hand electric drills. Tips: Reduced drill speeds, low drill pressure and increased use of water lubrication will extend drill bit life considerably.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #4
uxcell 14mm, 15mm Diamond Coated Hole Saw Drill Bits for Glass Ceramic Tile Marble Rock Porcelain 10pcs
Asin: B0BMTJPLZD | Model: f22051700ux0430 | PartNumber: f22051700ux0430
Nickel Plated Surface - The Nickel Plating Surface Can Extend The Service Life And Enhance Surface Corrosion Resistance..
Applications - Perfect For Drilling Glass, Ceramics, Porcelain, Ceramic Tile, Porcelain Tile, Limestone, Slate, Marble, Light Stone And Fiberglass. (Need To Be Used At A Low Speed; Always Use Lubrication (Water) When Processing, Otherwise The Hole Saw Will Burn.).
Special Design - Side Open Can Remove The Waste To Keep The Drill Bit Clean..
Diamond Coated - Diamond Coating Enhances The Drilling Speed, Which Makes The Bit Sharper..
Features
- Size - 14mm Drilling Diameter, 6.5mm Shank(5pcs); 15mm Drilling Diameter, 6.5mm Shank(5pcs)
- Diamond Coated - Diamond coating enhances the drilling speed, which makes the bit sharper.
- Nickel Plated Surface - The nickel plating surface can extend the service life and enhance surface corrosion resistance.
- Special Design - Side open can remove the waste to keep the drill bit clean.
- Applications - Perfect for drilling glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, light stone and fiberglass. (Need to be used at a low speed; Always use lubrication (water) when processing, otherwise the hole saw will burn.)
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #5
uxcell Brazed Diamond Core Drill Bits 14mm Hole Saws with M10 Arbor Adapter for Porcelain Tile Marble Concrete Stone Brick
Asin: B09QJ2DPSR
Wide Applications: Suitable For Drilling Porcelain, Tile, Marble, Stone, Masonry, Brick, Glass. Can Be Dry Or Wet Use. It Is Recommended To Be Used With Water For Cooling And Lubrication To Prolong The Using Life And Increase The Performance..
Arbor Adapter: The Adapter Converts M10 Thread To 3/8-Inch (9.5Mm) Triangle Shank. Fits Most Bench Drills, Hand Electric Drills. Tips: Reduced Drill Speeds, Low Drill Pressure And Increased Use Of Water Lubrication Will Extend Drill Bit Life Considerably..
Features: Large Clearance Hole Facilitates Entrance Of Cooling Water And Escape Of Chips And Other Particles From Drilling. Creates A Precision And Smooth Cut, Less Chipping And Minimizing Breakage..
Brazed Diamond: Diamond Grains Are Permanently Brazed To The Cutting Edge. Provide High Efficiency, Fast And Smooth Drilling, And Also Ensure Longer Working Life..
Features
- Core Drill Bits: Drilling Diameter: 14mm / 0.55"; Working Depth (Max .): 40mm / 1.57"; Female Thread Size: M10 x 1.5. Used on M10 angle grinders, easy to operate.
- Brazed Diamond: Diamond grains are permanently brazed to the cutting edge. Provide high efficiency, fast and smooth drilling, and also ensure longer working life.
- Wide Applications: Suitable for drilling porcelain, tile, marble, stone, masonry, brick, glass. Can be dry or wet use. It is recommended to be used with water for cooling and lubrication to prolong the using life and increase the performance.
- Features: Large clearance hole facilitates entrance of cooling water and escape of chips and other particles from drilling. Creates a precision and smooth cut, less chipping and minimizing breakage.
- Arbor Adapter: The adapter converts M10 thread to 3/8-inch (9.5mm) triangle shank. Fits most bench drills, hand electric drills. Tips: Reduced drill speeds, low drill pressure and increased use of water lubrication will extend drill bit life considerably.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #6
uxcell 14mm Sintered Diamond Core Drill Bits Hole Saws, Dry or Wet Drilling for Brick Concrete Block Masonry Marble, for M10 Angle Grinder
Asin: B09F9DCRH5
Fit For Angle Grinder: Easily Operate On The M10 Angle Grinder (Not Included Here). Or Need An Adapter For Drill Or Other Machine, Such As Hex, Round Shank Etc. (Not Included Here). Cannot Be Used On Impact Power Tools..
Notices: When Cutting Holes, It Needs To Be Positioned At An Angle Of 45 Degree And Make A Crescent-Shaped Trace On The Material. Then Cut Holes Vertically And Need To Be Cooled With Water..
Features: Large Clearance Hole Facilitates The Entrance Of Cooling Water And The Escape Of Chips And Other Particles From Drilling. Makes Drilling Process Much Easier..
Application: Can Be Dry Or Wet Drilling. To Prolong The Using Life, It Is Recommended To Be Used With Water For Cooling And Lubrication. Drill Accurate Holes On Concrete, Masonry, Hard Brick, Marble, Stone, Marble, Glass, Tile And Other Hard Materials..
Features
- Diamond Drill Bits: 14mm cutting diameter. Sintered diamond cutting edge contains diamond particles from inside to outside, to ensure that the edge is always sharp.
- Application: Can be dry or wet drilling. To prolong the using life, it is recommended to be used with water for cooling and lubrication. Drill accurate holes on concrete, masonry, hard brick, marble, stone, marble, glass, tile and other hard materials.
- Fit for Angle Grinder: Easily operate on the M10 Angle Grinder (not included here). Or need an adapter for drill or other machine, such as hex, round shank etc. (not included here). Cannot be used on impact power tools.
- Features: Large clearance hole facilitates the entrance of cooling water and the escape of chips and other particles from drilling. Makes drilling process much easier.
- Notices: When cutting holes, it needs to be positioned at an angle of 45 degree and make a crescent-shaped trace on the material. Then cut holes vertically and need to be cooled with water.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #7
Diamond BUR, SINTERED, Coarse 120 grit Domed Cylinder 14mm x5mm
Asin: B01F1HLDHA | Ean: 0736283511192 | UPC: 736283511192
Brand: JSP | Manufacturer: JSP®
See On Amazon #8
uxcell Cutter Tool 14mm Cutting Dia Diamond Coated Glass Tile Hole Saw 5 Pcs
Asin: B00TGUE45C | Model: a14122600ux0138 | PartNumber: a14122600ux0138
Total Length : 50Mm / 2";Color : Silver Tone.
Package Content : 5 X Diamond Glass Hole Saw.
Material : Metal;Weight : 65G.
Shank Size : 7 X 17Mm / 0.37" X 0.7"(D*L);Side Hole Size : 9 X 2.4Mm / 0.35" X 0.09"(L*W).
Features
- Product Name : Diamond Glass Hole Saw;Cutting Diameter : 14mm / 0.55"
- Shank Size : 7 x 17mm / 0.37 x 0.7(D*L);Side Hole Size : 9 x 2.4mm / 0.35 x 0.09(L*W)
- Total Length : 50mm / 2;Color : Silver Tone
- Material : Metal;Weight : 65g
- Package Content : 5 x Diamond Glass Hole Saw
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #9
uxcell 2 Pcs Diamond Coated 14mm Spherical Head Mounted Point Grinding Bit
Asin: B00REILCQW | Model: a14102700ux0089 | PartNumber: a14102700ux0089 | Ean: 0702105938911 | UPC: 702105938911
Shank Diameter : 6Mm/ 0.24";Total Length : 60Mm/ 2.4".
Package Content : 2 X Diamond Mounted Point.
Color : Silver Tone;Weight : 42G.
Material : Metal , Diamond;Head Diameter : 14Mm/ 0.55".
Features
- Product Name : Diamond Mounted Point;Head Design : Round Ball Shape
- Material : Metal , Diamond;Head Diameter : 14mm/ 0.55
- Shank Diameter : 6mm/ 0.24;Total Length : 60mm/ 2.4
- Color : Silver Tone;Weight : 42g
- Package Content : 2 x Diamond Mounted Point
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.09 pounds
See On Amazon #10
Continental Abrasives DB-SB14-10MM Sintered Segmented Blades, 14-Inch by 0.130-Inch by 1-Inch
Asin: B00T7NDUP8 | Model: DB-SB14-10MM | PartNumber: DB-SB14-10MM | Ean: 0748252500946 | UPC: 748252500946
14-Inch By .130-Inch By 1-Inch - 10Mm.
Max Rpm 5400.
Diamond Blades.
Features
- Sintered Segmented Blades
- Diamond Blades
- 14-inch by .130-inch by 1-inch - 10mm
- Max RPM 5400
- See more on Amazon...
Brand: Continental Abrasives | Manufacturer: Continental Abrasives
Dimensions: 0.50 x 14.00 x 14.00 inches
See On Amazon
Looking For Something Else?
Search