5/8"-11 HSS Tap UNS Machine Thread Tap Right Hand and 13.6mm Straight Handle Twist Drill
Asin: B09FV7MMP4 | Model: KinRite | PartNumber: KinRite | Ean: 0784015138261 | UPC: 784015138261
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.About The Drill Point 2: 6.35" Overall Length For Drilling Where Extra Length For Reach Is Required.
Package Included: 1Pc 5/8"-11 Tap+ 1Pc Φ13.6Mm Drill.
About The Tap: Hss Tap Offers Precision Cut Threads, Chip Removal, High Efficiency.
About The Drill Point 1: 135° Split Point Tip Prevents Drill From Walking,Round Shanks Allow Use With A Wide Variety Of Tool Holding Systems.
Features
- Model: 5/8"-11 tap + 13.6mm (17/32" ) drill
- About the drill point 1: 135 split point tip prevents drill from walking,Round shanks allow use with a wide variety of tool holding systems
- About the drill point 2: 6.35 overall length for drilling where extra length for reach is required
- About the tap: HSS tap offers precision cut threads, Chip removal, high efficiency
- Package Included: 1pc 5/8-11 tap+ 1pc 13.6mm drill
- See more on Amazon...
Brand: KinRite | Manufacturer: KinRite
Weight: 0.00 pounds
See On Amazon Similar To 5 811 HSS Tap UNS
#1
uxcell Spiral Point Plug Threading Tap M5 x 0.8 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Metric Screw Taps Tapping Bit for Thread Repair, 2pcs
Asin: B07Z9RLFRW | Model: a19091100ux0216 | PartNumber: a19091100ux0216
Applications: Thread Taps Are Great For Through-Hole Threads. Can Be Used For Drilling And Tapping Stainless Steel, Aluminum, Alloy Steel, Ordinary Steel, Cast Iron, Non-Ferrous Metals, Hard Plastics, Etc. Flutes On The Screw Tap Help To Remove Chips And Debris From The Hole..
Warm Tips: Machine Taps Are Suggested To Be Used With Tap Chucks With Overload Protection. It Is Not Recommended For Hand Use And Electric Drill Tapping. Micro Taps (Such As M1-M3.5) Are Mainly Used For Clocks, Watches, Low-Hardness Woods, And Soft Metals..
How To Use: Suitable For Drill Presses, Tapping Machines, Cnc And Milling Machines. Used With Tapping Oil To Get Higher Quality Threads And More Durable Taps. The Point Of The Tap Helps Guide It Into The Hole And Reduces The Torque Required To Turn It..
Material & Finish: 6542 High Speed Steel Metric Taps Run At High Speeds And Generate Threads Quickly And Efficiently, Offering High Hardness (Hrc62-64), Wear Resistance, And Good Toughness. Titanium Coating For Improving Wear Resistance, Hardness, Heat Resistance, Lubricity..
Features
- Spiral Point Tap: Thread size: M5 x 0.8; thread tolerance: H2; thread length: 20mm / 0.78"; plug chamfer and right hand thread cutting. 3 straight flutes are ground to provide provide downward chip removal, with clear threads and sharp cutting edges.
- Material & Finish: 6542 high speed steel metric taps run at high speeds and generate threads quickly and efficiently, offering high hardness (HRC62-64), wear resistance, and good toughness. Titanium coating for improving wear resistance, hardness, heat resistance, lubricity.
- Applications: Thread taps are great for through-hole threads. Can be used for drilling and tapping stainless steel, aluminum, alloy steel, ordinary steel, cast iron, non-ferrous metals, hard plastics, etc. Flutes on the screw tap help to remove chips and debris from the hole.
- How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps. The point of the tap helps guide it into the hole and reduces the torque required to turn it.
- Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping. Micro taps (such as M1-M3.5) are mainly used for clocks, watches, low-hardness woods, and soft metals.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #2
Drill America - POUM5X.8 m5 x .8 Tap and 4.20mm Drill Bit Kit, POU Series
Asin: B072FBTP4H | Model: POUM5X.8 | PartNumber: POUM5X.8 | Ean: 0887861290241 | UPC: 887861290241
Black Oxide Drill Bit Is Ideal For Production, Maintenance Or Portable Drilling Jobs.
Set Comes In Plastic Pouch.
M5 X .8 Hss Plug Tap And Matching 4.20Mm Hss Drill Bit In Plastic Pouch.
High Speed Steel Plug Hand Threading Tap Is Popular For Use In General Machine Tapping Or Cnc Tapping.
Features
- Set contains high speed steel plug hand tap and matching high speed steel drill bit
- High speed steel plug hand threading tap is popular for use in general machine tapping or cnc tapping
- Black oxide drill bit is ideal for production, maintenance or portable drilling jobs
- M5 x .8 hss plug tap and matching 4.20Mm hss drill bit in plastic pouch
- Set comes in plastic pouch
- See more on Amazon...
First Available: 05/11/2017
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 Inches
See On Amazon #3
Hymnorq M5 x 0.8 Metric HSS 4341 Combination Drill and Tap Bit Set of 5pcs with 1/4 Hex Shank and Self-Centering Split Point for Wood Plastic and Aluminum
Asin: B07FHZ8YL9 | Ean: 0666389425867 | UPC: 666389425867
Drills Holes And Taps Threads In One Bit And One Operation To Save Time, Money And Effort.
Ideally Suited For On-Site Tapping Construction Applications, Maintenance And Repair, Assembly, Manufacturing And Production Environments..
Precision Ground Point, Flutes, Body, Clearance, And Drill Diameters For The Best Accuracy And Performance.
Self-Centering Split Point Provides Excellent Drilling Accuracy And Precision; High Quality Hex Shank To Ensure Strong Connection To Drill Chuck.
Features
- Made from high-speed steel 4341 vs. carbon steel for longer life. Complete hole drilling and tapping in one operation with power drill saves labor and time
- Self-centering split point provides excellent drilling accuracy and precision; High quality hex shank to ensure strong connection to drill chuck
- Drills holes and taps threads in one bit and one operation to save time, money and effort
- Precision ground point, flutes, body, clearance, and drill diameters for the best accuracy and performance
- Ideally suited for on-site tapping construction applications, maintenance and repair, assembly, manufacturing and production environments.
- See more on Amazon...
Brand: HYMNORQ | Manufacturer: Hymnorq
See On Amazon #4
Drill America m5 x .8 High Speed Steel 2 Flute Spiral Point Tap, DWT Series
Asin: B00CF3JUZ6 | Model: DWTG5X.8 | PartNumber: DWTG5X.8 | Ean: 0887861075718 | UPC: 887861075718
Allow For Chip Accumulation In The Bottom Of The Hole.
High Speed Steel Spiral Point Tap.
Ideal For Threading A Wide Variety Of Ductile Materials, Copper And Copper Alloys, Brass And Non-Metallics.
They Are Recommended For Use In Through Or Blind Holes.
Features
- Tap shoots chips ahead of the cutting action reducing loading and clogging in the flutes
- They are recommended for use in through or blind holes
- Allow for chip accumulation in the bottom of the hole
- Ideal for threading a wide variety of ductile materials, copper and copper alloys, brass and non-metallics
- High speed steel spiral point tap
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 Inches
See On Amazon #5
uxcell Metric Hand Tap M5 Thread 0.8 Pitch 3 Straight Flutes H2 Alloy Tool Steel Bottom & Taper Screw Tap Set Tapping Tools for Repairing 2 Pairs
Asin: B07W71T3PK | Model: a19051000ux0721 | PartNumber: a19051000ux0721
Wide Applications: The Thread Tap Kit Is Used To Re-Thread Damaged Or Jammed Threads. Suitable For Tapping Through Or Shallow Holes In Mild Steels, Aluminum, Iron, Copper, Hard Plastic..
9Sicr Steel Taps: 9Sicr Steel Is A Commonly Used Low Alloy Tool Steel With High Hardening Capacity, High Wear Resistance And Low Speed Cutting. The Reddish-Brown Coating On The Tap Belongs To The Normal Processing Process, Not Rusting..
Hand Taps: Mainly For Hand Use, Used With Tap Wrenches. Straight Flute Tap Provides Fast Downward Chip Removal For Efficient Threading, Clear Threads Without Burrs, Universal Square Shank..
Tap Set: Taper Style: Starts The Thread Square With The Workpiece. Bottoming Tap: Generate Threads To The Bottom Of Holes. Add Appropriate Tapping Oil For Higher Quality Threads And More Durable Screw Taps..
Features
- Metric Taps: Thread Size: M5; Pitch: 0.8; Shank Side Width: 4mm / 0.16 inch; Thread Length: 19mm / 0.75 inch; Total Length: 54mm / 2.13 inch
- Tap Set: Taper Style: Starts the thread square with the workpiece. Bottoming Tap: Generate threads to the bottom of holes. Add appropriate tapping oil for higher quality threads and more durable screw taps.
- Wide Applications: The thread tap kit is used to re-thread damaged or jammed threads. Suitable for tapping through or shallow holes in mild steels, aluminum, iron, copper, hard plastic.
- Hand Taps: Mainly for hand use, used with tap wrenches. Straight flute tap provides fast downward chip removal for efficient threading, clear threads without burrs, universal square shank.
- 9SiCr Steel Taps: 9SiCr steel is a commonly used low alloy tool steel with high hardening capacity, high wear resistance and low speed cutting. The reddish-brown coating on the tap belongs to the normal processing process, not rusting.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #6
BOSCH BPT5M80 5mm - .80 High-Carbon Steel Metric Plug Tap
Asin: B07GRGD48X | Model: BPT5M80 | PartNumber: BPT5M80 | Ean: 0000346620955 | UPC: 000346620955
Rolled Threads – Deliver More Accuracy And Are Cleaner Than Machined Threads.
Rust And Tarnish Resistant Design – Provides Greater Durability And Accuracy.
Heat-Treated Carbon Steel – Provides Superior Durability And Speed.
Features
- Metric plug taps engineered for cutting right-hand internal metric threads, these taps are ideal for cutting internal threads in import cars, motorcycles and machinery
- Heat-treated carbon steel provides superior durability and speed
- Rolled threads deliver more accuracy and are cleaner than machined threads
- Rust and tarnish resistant design provides greater durability and accuracy
- See more on Amazon...
Brand: BOSCH | Manufacturer: C & J Direct GmbH & Co. KG
Dimensions: 5.88 x 0.25 x 1.78 Inches | Weight: 0.03 Pounds
See On Amazon #7
TAP CARDED 5MM-.8MM
Asin: B004GZHP9O | Model: 8322 | PartNumber: 8322 | Ean: 0042526083228 | UPC: 042526083228
Brand: IRWIN | Manufacturer: IRWIN
Dimensions: 5.90 x 0.50 x 1.70 Inches | Weight: 0.00 Pounds
See On Amazon #8
YG-1 G4 Series Vanadium Alloy HSS Spiral Flute Tap, Uncoated (Bright) Finish, Round Shank with Square End, Bottoming Chamfer, M5-0.8 Thread Size, D4 Tolerance -G4284
Asin: B00F8UQYEI | Model: G4284 | PartNumber: G4284 | Ean: 7241871141598
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.5-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.5-inches thread length
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #9
Burkit 2pcs M5 Spiral Point Tap, HSS Titanium coating M5 x 0.8 Spiral Point Plug Threading Tap
Asin: B0B6VKFJ1G | Model: M5X0.8 | PartNumber: M5X0.8
Features: Chips Are Expelled Downwards When Machining Threads, Ideal For Through-Hole And Deep Threading. With High Strength, Long Life, Fast Cutting Speed And Clear Thread..
Package Include: 2 Pcs M5x0.8Mm Spiral Point Tap..
Applications: Can Be Used For Tapping Stainless Steel (Below 30Hrc), Aluminum, Die Steel, Ordinary Steel, Non-Ferrous Metals, Hard Plastics, Etc..
Material: Manufactured By High-Temperature Quenching Of 6542 High-Speed Steel(M2), Higher Toughness And Wear Resistance. With Ti-Coated For Improving Wear And Fusion Resistance..
Features
- Cutting Diameter: 5mm, Pitch: 0.8mm, Cutting Direction: Right Hand, Accuracy Class: H2.
- Material: Manufactured by high-temperature quenching of 6542 high-speed steel(M2), higher toughness and wear resistance. With Ti-Coated for improving wear and fusion resistance.
- Features: Chips are expelled downwards when machining threads, Ideal for through-hole and deep threading. With high strength, long life, fast cutting speed and clear thread.
- Applications: Can be used for tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, hard plastics, etc.
- Package Include: 2 pcs M5X0.8mm Spiral Point Tap.
- See more on Amazon...
Brand: Burkit | Manufacturer: Burkit
Weight: 0.04 pounds
See On Amazon #10
YXQ M5 x 0.8mm Tap Machine HSS Metric Right Hand Thread 3 Straight Flute Taps Taper and Plug, 4Pcs
Asin: B07G48R3V3 | Ean: 0712755506316 | UPC: 712755506316
Flute Diameter : 5Mm / 0.196''; Flute Teeth Pitch : 0.8Mm / 0.31''.
Package Include: 4Pcs Taper And Plug Metric Tap.
Total Length : 56Mm / 2.2'';Diameter : 4.5Mm / 0.18''.
3 Straight Threaded Flute;Thread Direction:Right Hand.
Features
- Item name:Metric Tap,Plug type;Material : HSS(High Speed Steel)
- 3 Straight threaded flute;Thread Direction:Right Hand
- Flute Diameter : 5mm / 0.196''; Flute Teeth Pitch : 0.8mm / 0.31''
- Total Length : 56mm / 2.2'';Diameter : 4.5mm / 0.18''
- Package include: 4Pcs Taper and Plug Metric Tap
- See more on Amazon...
Brand: YXQ | Manufacturer: YXQ
Weight: 0.00 Pounds
See On Amazon #11
Drill America m5 x .8 High Speed Steel Metric 4 Flute Bottoming Hand Tap, T/A Series
Asin: B00DLCVBK2 | Model: T/AB5X.8 | PartNumber: T/AB5X.8 | Ean: 0887861068222 | UPC: 887861068222
High Speed Steel Hand Taps Are The Most Versatile Taps For Hand Use, Or For Tapping Under Power.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Hand Taps Are Popular For Use In General Machine Tapping Or Cnc Tapping.
High Speed Steel Hand Taps Come In Three Styles: Taper Style: Starts The Thread Square With The Workpiece. Plug Style: Generally Used In Thru Holes. Bottom Style: Generate The Thread To The Bottom Of The Hole..
Features
- Used to make new threads or re-thread damaged and/or jammed threads
- High Speed Steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole.
- High speed steel hand taps are the most versatile taps for hand use, or for tapping under power
- Hand taps are popular for use in general machine tapping or CNC tapping
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 inches
See On Amazon #12
HARKY - F4443 F4 Series Vanadium Alloy HSS Spiral Flute Tap, Steam Oxide, Round Shank with Square End, Bottoming Chamfer, 5/16"-18 Thread Size, H3 Tolerance
Asin: B00F8T5O36 | Model: F4443 | PartNumber: F4443
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
0.6875-Inches Thread Length.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Black Oxide Treatment Adds Lubricity And Creates Small Pockets On The Surface Of The Tool That Act To Hold Coolant Near The Cutting Edge.
Features
- High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- 0.6875-inches thread length
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.00 Pounds
See On Amazon #13
uxcell Metric Machine Tap M5x 0.8mm H2 High Speed Steel 3 Straight Flutes Screw Tapping Threading Machinist Repair DIY Tool 2pcs
Asin: B07KT3PPF3 | Model: a18102400ux0269 | PartNumber: a18102400ux0269
Suitable For Processing Through Holes Or Shallow Holes On Most Metals, Iron Plate, Copper, Zinc, Alloy Steel, Abrasive Steel, A3 Steel, Stainless Steel, Etc.. Add Appropriate Tapping Oil For Higher Quality Internal Threads And More Durable Taps..
Machine Taps Used With Drilling Machines, Tapping Machines, Automatic Machines, Machining Centers, Cnc, Milling Machines, Not Recommended For Hand And Electric Drill Tapping. Recommended Feed Speed: Ordinary Steel: 6-15M/Min; Harder Steel Material: 5-10M/Min; Stainless Steel: 2-7M/Min; Cast Iron: 8-10M/Min..
Standard Metric Thread Design, Clear And Tidy, Provide Rapid Chip Removal For Efficient Threading. Straight Flute Design, Right Hand Tapping Direction. The Mini Metric Taps Are Mainly Used For Clocks, Watches, Low Hardness Wood And Soft Metal Hole Processing..
The Thread Tap Can Make New Threads Or Re-Thread Damaged Or Jammed Threads. Uncoated Taps Feature Just The Base Substrate Without Any Additional Coatings, And Fit A Wide Range Of Applications..
Features
- Thread Size: M5x 0.8mm. High-speed steel metric taps are with high hardness and toughness for wear resistance, well suited for general purpose applications.
- The thread tap can make new threads or re-thread damaged or jammed threads. Uncoated taps feature just the base substrate without any additional coatings, and fit a wide range of applications.
- Suitable for processing through holes or shallow holes on most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Add appropriate tapping oil for higher quality internal threads and more durable taps.
- Standard metric thread design, clear and tidy, provide rapid chip removal for efficient threading. Straight flute design, right hand tapping direction. The mini metric taps are mainly used for clocks, watches, low hardness wood and soft metal hole processing.
- Machine taps used with drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min; harder steel material: 5-10m/min; stainless steel: 2-7m/min; cast iron: 8-10m/min.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 4.72 x 1.97 Inches | Weight: 0.00 Pounds
See On Amazon #14
YXQ M5 x 0.8mm Tap Machine HSS Metric Right Hand Thread 3 Straight Flute Taps Taper and Plug (10Pcs)
Asin: B084GJMX2N
Flute Diameter : 5Mm / 0.196''; Flute Teeth Pitch : 0.8Mm / 0.31'';Thread Length : 29Mm / 1.14''.
Package Include: 10Pcs Taper And Plug Metric Tap.
Total Length : 56Mm / 2.2'';Shank Diameter : 4.5Mm / 0.18''.
3 Straight Threaded Flute;Thread Direction:Right Hand.
Features
- Item name:Metric Tap,Plug type;Material : HSS(High Speed Steel)
- 3 Straight threaded flute;Thread Direction:Right Hand
- Flute Diameter : 5mm / 0.196''; Flute Teeth Pitch : 0.8mm / 0.31'';Thread Length : 29mm / 1.14''
- Total Length : 56mm / 2.2'';Shank Diameter : 4.5mm / 0.18''
- Package include: 10Pcs Taper and Plug Metric Tap
- See more on Amazon...
Brand: YXQ | Manufacturer: YXQ
See On Amazon #15
uxcell M5 x 0.8 Spiral Flute Thread Tap, Metric Machine Threading Tap HSS Nitriding Coated, Round Shank with Square End, H2 Tolerance, 2pcs
Asin: B09766V534 | Model: a20010400ux0071 | PartNumber: a20010400ux0071
Applications: Suitable For Processing Blind Holes And Sticky Materials. Great For Drilling And Tapping Aluminum, Die Steel, Stainless Steel, Bronze, Hard Plastics, Etc..
Tips: Machine Taps Are Suggested To Be Used With Tap Collets With Overload Protection. Hand Use Is Easy To Cause Damage To The Tap Due To Uneven Force..
Easy To Use: Used On Drilling Machines, Tapping Machines, Cnc And Milling Machines. Use With Tapping Oil To Get Higher Quality Threads And More Durable Taps..
Material And Finish: High-Speed Steel Tool Is With High Hardness And Toughness For Wear Resistance, Good For General Purpose Applications. Features Nitriding Coated Surface For Rust Prevention And Long Service Life..
Features
- Tap Size: M5 x 0.8 thread, H2 tolerance. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads without burrs, fast tapping with accuracy.
- Material and Finish: High-speed steel tool is with high hardness and toughness for wear resistance, good for general purpose applications. Features nitriding coated surface for rust prevention and long service life.
- Applications: Suitable for processing blind holes and sticky materials. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc.
- Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps.
- Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause damage to the tap due to uneven force.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #16
uxcell M5 x 0.8 Spiral Point Threading Tap, H2 Tolerance High Speed Steel TICN Coated, Round Shank with Square End, Metric Screw Taps Tapping Bit for Machinist Thread Repair, 2pcs
Asin: B08J6SF96K | Model: a20010400ux0054 | PartNumber: a20010400ux0054
Applications: Thread Taps Are Great For Through-Hole Threads. Can Be Used For Drilling And Tapping Stainless Steel, Aluminum, Alloy Steel, Ordinary Steel, Cast Iron, Non-Ferrous Metals, Hard Plastics, Etc. Flutes On The Screw Tap Help To Remove Chips And Debris From The Hole..
Warm Tips: Machine Taps Are Suggested To Be Used With Tap Chucks With Overload Protection. It Is Not Recommended For Hand Use And Electric Drill Tapping. Micro Taps (Such As M1-M3.5) Are Mainly Used For Clocks, Watches, Low-Hardness Woods, And Soft Metals..
How To Use: Suitable For Drill Presses, Tapping Machines, Cnc And Milling Machines. Used With Tapping Oil To Get Higher Quality Threads And More Durable Taps. The Point Of The Tap Helps Guide It Into The Hole And Reduces The Torque Required To Turn It..
Material & Finish: 6542 High Speed Steel Metric Taps Run At High Speeds And Generate Threads Quickly And Efficiently, Offering High Hardness (Hrc62-64), Wear Resistance, And Good Toughness. Ticn Coating For Improving Wear Resistance, Hardness, Heat Resistance, Lubricity..
Features
- Spiral Point Tap: M5 x 0.8 thread with H2 tolerance, JIS standard, right hand thread cutting. Straight flutes taps provide provide downward chip removal, with clear threads and sharp cutting edges.
- Material & Finish: 6542 high speed steel metric taps run at high speeds and generate threads quickly and efficiently, offering high hardness (HRC62-64), wear resistance, and good toughness. TICN coating for improving wear resistance, hardness, heat resistance, lubricity.
- Applications: Thread taps are great for through-hole threads. Can be used for drilling and tapping stainless steel, aluminum, alloy steel, ordinary steel, cast iron, non-ferrous metals, hard plastics, etc. Flutes on the screw tap help to remove chips and debris from the hole.
- How to Use: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps. The point of the tap helps guide it into the hole and reduces the torque required to turn it.
- Warm Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping. Micro taps (such as M1-M3.5) are mainly used for clocks, watches, low-hardness woods, and soft metals.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #17
Drill America DWT54504 5/16"-18 UNC High Speed Steel Taper Tap, (Pack of 1)
Asin: B00DL7PCK2 | Model: DWT54504 | PartNumber: DWT54504 | Ean: 0887861069946 | UPC: 887861069946
High Speed Steel Hand Taps Are The Most Versatile Taps For Hand Use, Or For Tapping Under Power.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Hand Taps Are Popular For Use In General Machine Tapping Or Cnc Tapping.
High Speed Steel Hand Taps Come In Three Styles: Taper Style: Starts The Thread Square With The Workpiece. Plug Style: Generally Used In Thru Holes. Bottom Style: Generate The Thread To The Bottom Of The Hole..
Features
- Used to make new threads or re-thread damaged and/or jammed threads
- High Speed Steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole.
- High speed steel hand taps are the most versatile taps for hand use, or for tapping under power
- Hand taps are popular for use in general machine tapping or CNC tapping
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 2.00 x 6.00 x 4.00 Inches
See On Amazon #18
5/8 -11 UNC HSS Tap And Die Set 5/8 -11 UNS Machine Thread Tap And 5/8 -11 UNS Round Thread Die Right Hand
Asin: B09FTPRNR3 | Model: KinRite | PartNumber: KinRite | Ean: 0784015138247 | UPC: 784015138247
High Speed Steel (Hss) Provides Good Wear-Resistance.
Package:1 X 5/8“-11 ,Unc Tap And Die.
Can Be Used In General Purpose Applications For Both Ferrous And Non-Ferrous Materials.
Application: Cutting Tools & Consumables, Arbon Steel,Alloy Steel And Cast Iron Hole Processing Etc.
Features
- Thread diameter (D): 5/8 -11
- Application: Cutting Tools & Consumables, arbon steel,alloy steel and cast iron hole processing etc
- High speed steel (HSS) provides good wear-resistance
- Can be used in general purpose applications for both ferrous and non-ferrous materials
- Package:1 x 5/8 -11 ,UNC Tap and die
- See more on Amazon...
Brand: KinRite | Manufacturer: KinRite
See On Amazon #19
Drill America m5 x .8 High Speed Steel 4 Flute Hand Tap Set, DWT Series
Asin: B00FXKXUAY | Model: DWTS5X.8 | PartNumber: DWTS5X.8 | Ean: 0887861072212 | UPC: 887861072212
High Speed Steel Hand Taps Are The Most Versatile Taps For Hand Use, Or For Tapping Under Power.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Hand Taps Are Popular For Use In General Machine Tapping Or Cnc Tapping.
High Speed Steel Hand Taps Come In Three Styles: Taper Style: Starts The Thread Square With The Workpiece. Plug Style: Generally Used In Thru Holes. Bottom Style: Generate The Thread To The Bottom Of The Hole..
Features
- Used to make new threads or re-thread damaged and/or jammed threads
- High Speed Steel Hand Taps come in three styles: Taper Style: Starts the thread square with the workpiece. Plug Style: Generally used in thru holes. Bottom Style: Generate the thread to the bottom of the hole.
- High speed steel hand taps are the most versatile taps for hand use, or for tapping under power
- Hand taps are popular for use in general machine tapping or CNC tapping
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- See more on Amazon...
Brand: Drill America | Manufacturer: Drill America
Dimensions: 0.50 x 3.20 x 1.40 Inches | Weight: 0.02 Pounds
See On Amazon #20
Metric Machine Tap M5 x 0.8mm Pitch Thread Pitch 3 Flutes, High Speed Steel Thread Forming Pointed Tap, Uncoated (Bright) Finish, Round Shank with Square End, Plug Chamfer, HSS Screw Plug Tap
Asin: B08NVRC4PM | Model: 2020-11-19-15-59 | PartNumber: 2020-11-19-15-59
Optimized Design: Special Heat Treatment, More Durable, Optimized Handle For Easy Clamping, Convenient Processing And Use, And Ensure The Long-Lasting Stability Of The Equipment..
Applicable Materials: Stainless Steel/Cast Iron/Copper/Alloy Steel/Die Steel/A3 Steel And Other Metals..
Applicable Scenarios: Drilling Machine/Tapping Machine/Cnc Machining Center/Automatic Lathe/Milling Machine, Etc..
Selected Material: Overall Hss Imported Steel, Combined With Abrasion Resistance And Hardness, A Wide Range Of Processing, One Piece Worth Multiple Pieces..
Features
- IMPORTED TECHNOLOGY: Imported High Precision Grinder, The Whole Is Ground And Formed at One Time, The Concentricity Is High, The Rigidity of The Tap Is Increased, and It Is Not Easy To Break.
- SELECTED MATERIAL: Overall HSS Imported Steel, Combined with Abrasion Resistance and Hardness, a Wide Range of Processing, One Piece Worth Multiple Pieces.
- OPTIMIZED DESIGN: Special Heat Treatment, More Durable, Optimized Handle For Easy Clamping, Convenient Processing And Use, And Ensure The Long-Lasting Stability of The Equipment.
- APPLICABLE SCENARIOS: Drilling Machine/Tapping Machine/CNC Machining Center/Automatic Lathe/Milling Machine, Etc.
- APPLICABLE MATERIALS: Stainless Steel/Cast Iron/Copper/Alloy Steel/Die Steel/A3 Steel And other Metals.
- See more on Amazon...
Brand: LingGan | Manufacturer: LingGan
Dimensions: 0.20 x 2.52 x 0.20 Inches | Weight: 0.02 Pounds
See On Amazon
Looking For Something Else?
Search