LKONWEE Stainless Steel Pinion Yoke Wrench Tool - Extra Strength Puller for Loosening Pinion Flange and Nuts - Extra 1/2" Hole,Compatible with Most AMC, Dana, Ford, and GM Yokes
Asin: B09HGSGSG2 | Model: YWR-12 | PartNumber: YWR-12 | Ean: 0770619594015 | UPC: 770619594015
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.There Are 8 Slots That Are Compatible With 1/4-Inch, 5/16-Inch, And 3/8-Inch Bolt Sizes In Different Distances And Configurations..
Holds The Yoke In Place -- Use The Pinion Wrench While Applying Torque. It Will Help You Loosen Even The Most Stubborn Pinion Nuts. You Also Can Grasp The 1 / 2 "Circuit Breaker Rod Or 3 / 4" Drive Tool As A Lever To Improve Your Work Efficiency..
Usually The Yoke Flange Wrench Has Only One 1/2" Square Socket, But We Consider That You May Need To Use More Than One In The Work, So We Have Added An Additional 1/2" Square Socket.Finally, The 2-Inch Center Socket Hole Fits Different Types Of Torque Wrenches..
Compatible With Most Ford, Amc, Dana, And Gm Yokes. Fits Almost All Pinion And Companion Flanges..
Features
- Made of high quality stainless steel, it can handle very high torque needed .Compare with soft carbon steel ,this flange wrench not easy to bend,our stainless steel material allows you to use this tool for many years.
- Compatible with most Ford, AMC, Dana, and GM yokes. Fits almost all pinion and companion flanges.
- There are 8 slots that are compatible with 1/4-inch, 5/16-inch, and 3/8-inch bolt sizes in different distances and configurations.
- Usually the yoke flange wrench has only one 1/2 square socket, but we consider that you may need to use more than one in the work, so we have added an additional 1/2 square socket.Finally, the 2-inch center socket hole fits different types of torque wrenches.
- Holds The Yoke In Place -- Use the pinion wrench while applying torque. It will help you loosen even the most stubborn pinion nuts. you also can grasp the 1 / 2 circuit breaker rod or 3 / 4 drive tool as a lever to improve your work efficiency.
- See more on Amazon...
Brand: LKONWEE | Manufacturer: LKONWEE
See On Amazon Similar To LKONWEE Stainless Steel Pinion Yoke
#1
Driveshaft Parts DSP Replacement for Ford C-4AODT5 28 Spline Transmission Slip Yoke 2-3-5981X
Asin: B0924MFF31 | Ean: 0764283541123 | UPC: 764283541123
28 Spline - 27 Based On 28.
Part Number: 2-3-5981X.
Fit Type: Vehicle Specific.
Fits The Ford C-4/Aod/T5 Transmissions.
Features
- Takes 1330 Series U-Joint 5-213X
- Fits the Ford C-4/AOD/T5 Transmissions
- 28 Spline - 27 based on 28
- Fit type: Vehicle Specific
- Part number: 2-3-5981X
- See more on Amazon...
Brand: Driveshaft Parts | Manufacturer: Driveshaft Parts
Weight: 2.60 Pounds
See On Amazon #2
Spicer 2-4-8091X End Yoke
Asin: B018OGI9HW | Model: 2-4-8091X | PartNumber: 2-4-8091X | Ean: 0023913235321 | UPC: 023913235321
American Motors Eagle 1987-80; Chevrolet Blazer 1974-69, C10 Panel 1967, C10 Pickup 1968-67, C10 Suburban 1980-60, C20 Suburban 1980-60, Camaro 1994-84, G10 Van 1972-64, K10 1980-75, K10 Pickup 1974-60, K10 Suburban 1980-60; More.
Pinion Yoke - 1310 U-Bolt Style.
Features
- Spicer genuine OE replacement
- Pinion yoke - 1310 U-Bolt style
- American motors eagle 1987-80; Chevrolet blazer 1974-69, c10 panel 1967, c10 pickup 1968-67, c10 suburban 1980-60, c20 suburban 1980-60, Camaro 1994-84, g10 van 1972-64, k10 1980-75, k10 pickup 1974-60, k10 suburban 1980-60; more
- See more on Amazon...
First Available: 01/01/2016
Brand: Spicer | Manufacturer: Spicer
Dimensions: 4.00 x 4.00 x 4.00 inches | Weight: 0.02 Pounds
See On Amazon #3
AIVWUMOT Transmission Slip Yoke 3-3-6081X 1350 Series Compatible with TH200-4R TH350 TH700 4L60E Fit for Muncie M20 M21 M22 Fit for Saginaw Borg Warner T-5 T-10 T-56 27 spline output
Asin: B0CMQDGBML | Model: 3-3-6081X | PartNumber: 3-3-6081X
【Application】Compatible With Muncie M20 M21 M22.
【Outstanding After-Sales】If You Are Dissatisfied With Your Purchase For Any Reason, You Can Contact Us Through Your Order, We Are Always There.
【Application】Compatible With Saginaw Borg Warner T-5 T-10 T-56.
【Application】Compatible With Th200-4R Th350 Th700 4L60e.
Features
- Part Number 3-3-6081X
- Application Compatible with TH200-4R TH350 TH700 4L60E
- Application Compatible with Muncie M20 M21 M22
- Application Compatible with Saginaw Borg Warner T-5 T-10 T-56
- Outstanding After-Sales If you are dissatisfied with your purchase for any reason, you can contact us through your order, we are always there
- See more on Amazon...
Brand: AIVWUMOT | Manufacturer: AIVWUMOT
Warranty: 1 Year Warranty
See On Amazon #4
All States Ag Parts Parts A.S.A.P. PTO Replacement Yoke Series 4 1-3/8" 6 Spline Quick Disconnect Pin
Asin: B01J9K0LVO | Ean: 0636431296783 | UPC: 636431296783
Hp Rating: 35 Hp.
All New, Rebuilt And Used Tractor Parts Have A 1-Year Warranty.
Cross And Bearing Kit Use 157375.
General Purpose, Rotary Rakes, Rotary Cutters, Post Hole Augers, Brush Cutters, Small Tillers.
Features
- The yoke features a push pin quick disconnect button to lock onto implement or tractor shaft, standard 1 3/8" bore with 6 splines
- General purpose, rotary rakes, rotary cutters, post hole augers, brush cutters, small tillers
- HP Rating: 35 HP
- Cross And Bearing Kit use 157375
- All new, rebuilt and used tractor parts have a 1-year warranty
- See more on Amazon...
Brand: All States Ag Parts Parts A.S.A.P.
Dimensions: 4.00 x 6.00 x 3.00 inches | Weight: 4.00 pounds
See On Amazon #5
AMOGOT Metal Steel 32P Pinion Gear 3.175mm Shaft 10T 11T 12T 13T 14T with Hex Key for RC Brushless Brush Motor RC Car Upgrade Part A
Asin: B0CNNMPGBB
【Material】Made Of Hardened Steel To Increased Wear Resistance And Improve Fatigue Life,Make Them Roll Smoothly, It Will Work With The Steel Spur Gear. Did Not Work With Plastic Or Aluminum Spur Gear.
【Package】32P 3.175Mm Shaft 10T 11T 12T 13T 14T Pinion Gear And A Hex Key.
【Size】Height:11Mm/0.43Inch Comes With Screws For Each Pinion Gear.
【Spec】32 Pitch Pinion Gear 3.175Mm 10T 11T 12T 13T 14T.
Features
- Compatible with 3.175mm Shaft Size Motors(Compatible With 550 540 3650 etc motor) make sure your RC motor shaft have the same diameter
- Spec 32 Pitch pinion gear 3.175mm 10T 11T 12T 13T 14T
- Material Made of Hardened Steel to increased wear resistance and improve fatigue life,make them roll smoothly, it will work with the steel spur gear. did not work with plastic or aluminum spur gear
- Size Height:11mm/0.43inch Comes with screws for each pinion gear
- Package 32P 3.175mm shaft 10T 11T 12T 13T 14T pinion gear and a hex key
- See more on Amazon...
Brand: AMOGOT | Manufacturer: AMOGOT
See On Amazon #6
HobbyPark Metal Steel 32 Pitch Pinion Gear Set 5mm Shaft Hole 17T 18T 19T 20T 21T Motor Gears Kit for RC Car (5-Pack)
Asin: B082TXMLWV | Model: 66-8286 | PartNumber: 66-8286
【Material】Made Of Quality Metal Steel (Hardened).
【Package】5 Pieces In Total (With 1 Extra L Hex Key), Variety Of Tooth Pinions Allows For More Gear Setups.
【Spec】32P Pitch, 17T 18T 19T 20T 21T.
Features
- Compatible with 5mm Shaft Size Motors
- Spec 32P Pitch, 17T 18T 19T 20T 21T
- Material Made Of Quality Metal Steel (Hardened)
- Package 5 Pieces in total (with 1 extra L Hex Key), Variety of tooth pinions allows for more gear setups
- See more on Amazon...
Brand: Hobbypark | Manufacturer: HobbyPark
See On Amazon #7
DSP 3-3-2431X Slip Yoke Replacement Fit for GM Turbo 400, TH400 Transmission, 1350 Series
Asin: B0CDM81YJR | Model: 3-3-2431X | PartNumber: 3-3-2431X | Ean: 0732262896335 | UPC: 732262896335
Aftermarket Part Replace For Oe# 3-3-2431X.
No Counter Bore.
Fits For Gm Th / Turbo Hydromatic / Turbo 400 / 4L80e & 4L85e, Muncie M21 & M22, Borg Warner Super T10.
31 Based On 32 Spline.
Features
- 1350 Series Transmission Slip Yoke
- 31 Based on 32 Spline
- Aftermarket part replace for OE# 3-3-2431X
- Fits for GM TH / Turbo Hydromatic / Turbo 400 / 4l80E & 4L85E, Muncie M21 & M22, Borg Warner Super T10
- No Counter Bore
- See more on Amazon...
Brand: Driveshaft Parts | Manufacturer: Driveshaft Parts
Dimensions: 1.80 x 7.00 x 3.80 inches | Weight: 3.00 Pounds
Warranty: 2 Year manufacturer
See On Amazon #8
BUYMACHINERYPARTS 2-3-10431X Slip Yoke for 1310 Series U-Joint, Drive Shaft Transmission Slip Yoke Compatible with GM Turbo 400 TH400, Munce 4L80E 4L85E, Super T10 Transmission
Asin: B0BRXNMJ2C
Style:Outside Snap Ring.
Specification：Outside Yoke Dimension (E) In.3.466; Bearing Cap Diameter (D) In.1.062; Hub Diameter (R) In.1.885.
Specification：1310 Series, Slip Yoke Length:5.500 Inch (Center Line To End Of Spline).
Fitment: Compatible With 5-153X Universal Joint; Compatible With Gm Th / Turbo Hydromatic / Turbo 400 / 4L80e & 4L85e.
Features
- Replace the OEM number: 2-3-10431X
- Fitment: Compatible with 5-153X Universal Joint; Compatible with GM TH / Turbo Hydromatic / Turbo 400 / 4l80E & 4L85E
- Style:Outside Snap Ring
- Specification 1310 Series, Slip Yoke Length:5.500 inch (Center Line to End of Spline)
- Specification Outside Yoke Dimension (E) In.3.466; Bearing Cap Diameter (D) In.1.062; Hub Diameter (R) In.1.885
- See more on Amazon...
Brand: BUYMACHINERYPARTS | Manufacturer: BUYMACHINERYPARTS
See On Amazon #9
GM 12-Bolt Chevy 1350 Forged Steel Pinion Yoke - Car Truck - Rearend - 30 Spline
Asin: B01NAIIMYH | Ean: 0753807413855 | UPC: 753807413855
Includes New 1350 U-Bolts.
Fits 12-Bolt Car & 12-Bolt Truck.
Features
- New 12-Bolt 1350 Forged Steel Yoke
- Fits 12-Bolt Car & 12-Bolt Truck
- Includes New 1350 U-Bolts
- See more on Amazon...
Brand: QP | Manufacturer: QP
See On Amazon
Looking For Something Else?
Search