Shinwa 24 Inch Rigid Stainless Steel Machinist Ruler English/Metric Graduations (1/64, 1/32, mm and .5mm) Satin Chrome Finish
Asin: B09HZ45YL5 | Model: H-3412E | PartNumber: H-3412E | Ean: 4960910304666
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.This Ruler Is Made From Sus420j2 Stainless Steel Hardened To Hrc-40 And Then Coated With A Smooth, Hard, Non-Glare Chrome. This Hard Chrome Makes The Rule Resistant To Scratches And Corrosion, But Also Eliminates Glare Greatly Enhancing Readability In Bright-Light Conditions..
Sizes Is 24 Inch X 1.25 Inch Wide X 0.040 Inch Thick.
The Edges Are Ground Straight And Then Smoothed So When Scribing Along The Edge With A Pencil Or Marking Knife Not Even The Slightest Resistance Is Encountered. The Ends Are Ground Square To Within 0.001”..
This Ruler Has English/Metric Markings With 1/32Nd And 1/64Th Graduations On One Side And Mm And .5Mm Marks On The Reverse. The Super-Fine Graduation Marks Have Been Precision Photo-Etched And Then Black-Filled For Easy Readability. These Markings Will Not Wear Off Even After Years Of Abuse..
Features
- This machinist ruler is made in Japan by Shinwa. Shinwa is the leading manufacturer of measuring tools in Japan and is quickly becoming the benchmark worldwide. All their rulers are made to strict Japanese Industrial Standards (JIS B7516 Grade 1) for material consistency, hardness, length, thickness, end squareness, finish, flatness and straightness.
- This ruler has English/Metric markings with 1/32nd and 1/64th graduations on one side and mm and .5mm marks on the reverse. The super-fine graduation marks have been precision photo-etched and then black-filled for easy readability. These markings will not wear off even after years of abuse.
- This ruler is made from SUS420J2 stainless steel hardened to HRC-40 and then coated with a smooth, hard, non-glare chrome. This hard chrome makes the rule resistant to scratches and corrosion, but also eliminates glare greatly enhancing readability in bright-light conditions.
- The edges are ground straight and then smoothed so when scribing along the edge with a pencil or marking knife not even the slightest resistance is encountered. The ends are ground square to within 0.001 .
- Sizes is 24 inch x 1.25 inch wide x 0.040 inch thick
- See more on Amazon...
Brand: Shinwa | Manufacturer: Shinwa
Dimensions: 0.04 x 24.00 x 1.25 inches
See On Amazon Similar To Shinwa 24 Inch Rigid Stainless
#1
Shinwa Rigid Stainless Steel Machinist Ruler 5R Graduations (1/64, 1/32, 1/10, 1/100) Satin Chrome Finish (36 inch)
Asin: B09HYXJJR9 | Ean: 4960910247253
These Rulers Are Made From Sus420j2 Stainless Steel Hardened To Hrc-40 And Then Coated With A Smooth, Hard, Non-Glare Chrome. This Hard Chrome Makes The Rule Resistant To Scratches And Corrosion, But Also Eliminates Glare Greatly Enhancing Readability In Bright-Light Conditions..
Sizes Are As Follows: 6 Inch Is 3/4 Inch Wide By 0.032 Inch Thick, 12 Inch Is 1.25 Inch X 0.040 Inch Thick, 24 Inch Is 1.25 Inch Wide By 0.040 Inch Thick, 36 Inch Is 1.25 Inch Wide By 0.040 Inch Thick. Rule Comes With A Vinyl Sleeve For Protection When Not In Use..
The Edges Are Ground Straight And Then Smoothed So When Scribing Along The Edge With A Pencil Or Marking Knife Not Even The Slightest Resistance Is Encountered. The Ends Are Ground Square To Within 0.001”..
These Rulers Have 5R Markings With 1/32Nd And 1/64Th Graduations On One Side And 1/10Th And 100Th Marks On The Reverse. The Super-Fine Graduation Marks Have Been Precision Photo-Etched And Then Black-Filled For Easy Readability. These Markings Will Not Wear Off Even After Years Of Abuse..
Features
- These machinist rulers are made in Japan by Shinwa. Shinwa is the leading manufacturer of measuring tools in Japan and is quickly becoming the benchmark worldwide. All their rulers are made to strict Japanese Industrial Standards (JIS B7516 Grade 1) for material consistency, hardness, length, thickness, end squareness, finish, flatness and straightness.
- These rulers have 5R markings with 1/32nd and 1/64th graduations on one side and 1/10th and 100th marks on the reverse. The super-fine graduation marks have been precision photo-etched and then black-filled for easy readability. These markings will not wear off even after years of abuse.
- These rulers are made from SUS420J2 stainless steel hardened to HRC-40 and then coated with a smooth, hard, non-glare chrome. This hard chrome makes the rule resistant to scratches and corrosion, but also eliminates glare greatly enhancing readability in bright-light conditions.
- The edges are ground straight and then smoothed so when scribing along the edge with a pencil or marking knife not even the slightest resistance is encountered. The ends are ground square to within 0.001 .
- Sizes are as follows: 6 inch is 3/4 inch wide by 0.032 inch thick, 12 inch is 1.25 inch x 0.040 inch thick, 24 inch is 1.25 inch wide by 0.040 inch thick, 36 inch is 1.25 inch wide by 0.040 inch thick. Rule comes with a vinyl sleeve for protection when not in use.
- See more on Amazon...
Brand: Shinwa | Manufacturer: Shinwa
Dimensions: 0.04 x 36.00 x 1.25 inches
See On Amazon #2
Kristeel Shinwa 24" 600 mm Rigid English Metric Satin Chrome Stainless Steel Machinist Engineer Ruler/Rule with Conversion Table Model 401 E10
Asin: B07CBS2KHX
Features
- Kristeel 24" 600 mm Rigid English Metric Satin Chrome Stainless Steel Machinist Engineer Ruler / Rule with Conversion Table Model 401 E10
- See more on Amazon...
Brand: AI | Manufacturer: OMEX
See On Amazon #3
Shinwa Rigid Stainless Steel Machinist Ruler 16R Graduations (1/64, 1/32, 1/50, 1/100) Satin Chrome Finish (12 inch)
Asin: B09HYSDTZL | Ean: 4960910249455
These Rulers Are Made From Sus420j2 Stainless Steel Hardened To Hrc-40 And Then Coated With A Smooth, Hard, Non-Glare Chrome. This Hard Chrome Makes The Rule Resistant To Scratches And Corrosion, But Also Eliminates Glare Greatly Enhancing Readability In Bright-Light Conditions..
Sizes Are As Follows: 6 Inch Is 3/4 Inch Wide By 0.032 Inch Thick, 12 Inch Is 1.25 Inch X 0.040 Inch Thick, 24 Inch Is 1.25 Inch Wide By 0.040 Inch Thick, 36 Inch Is 1.25 Inch Wide By 0.040 Inch Thick. Rule Comes With A Vinyl Sleeve For Protection When Not In Use..
The Edges Are Ground Straight And Then Smoothed So When Scribing Along The Edge With A Pencil Or Marking Knife Not Even The Slightest Resistance Is Encountered. The Ends Are Ground Square To Within 0.001”..
These Rulers Have 16R Markings With 1/32Nd And 1/64Th Graduations On One Side And 1/50Th And 100Th Marks On The Reverse. The Super-Fine Graduation Marks Have Been Precision Photo-Etched And Then Black-Filled For Easy Readability. These Markings Will Not Wear Off Even After Years Of Abuse..
Features
- These machinist rulers are made in Japan by Shinwa. Shinwa is the leading manufacturer of measuring tools in Japan and is quickly becoming the benchmark worldwide. All their rulers are made to strict Japanese Industrial Standards (JIS B7516 Grade 1) for material consistency, hardness, length, thickness, end squareness, finish, flatness and straightness.
- These rulers have 16R markings with 1/32nd and 1/64th graduations on one side and 1/50th and 100th marks on the reverse. The super-fine graduation marks have been precision photo-etched and then black-filled for easy readability. These markings will not wear off even after years of abuse.
- These rulers are made from SUS420J2 stainless steel hardened to HRC-40 and then coated with a smooth, hard, non-glare chrome. This hard chrome makes the rule resistant to scratches and corrosion, but also eliminates glare greatly enhancing readability in bright-light conditions.
- The edges are ground straight and then smoothed so when scribing along the edge with a pencil or marking knife not even the slightest resistance is encountered. The ends are ground square to within 0.001 .
- Sizes are as follows: 6 inch is 3/4 inch wide by 0.032 inch thick, 12 inch is 1.25 inch x 0.040 inch thick, 24 inch is 1.25 inch wide by 0.040 inch thick, 36 inch is 1.25 inch wide by 0.040 inch thick. Rule comes with a vinyl sleeve for protection when not in use.
- See more on Amazon...
Brand: Shinwa | Manufacturer: Shinwa
Dimensions: 0.04 x 12.00 x 1.25 inches
See On Amazon
Looking For Something Else?
Search