MECCANIXITY Rubber Flange Gasket Full Face for 6 Inch DN150 Pipe 8 Bolt Holes Black Flat Washer
Asin: B09J16B94Z | Model: mea210729ee0158 | PartNumber: mea210729ee0158
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Bolt Hole Quantity: 8; Bolt Hole Inside Diameter: 24Mm / 0.94 Inch; Working Pressure: Less Than 0.05Mpa; Working Temperature Range: -40°C To 230°C (-40°F To 446°F).
Please Select The Correct Dimensions Required Before Purchase. It Is Recommended To Install With A Torque Wrench (Not Included).
The Flat Gaskets Are Used Wherever A Union Or Flange Is Required To Prevent Leaking. Corrosion Resistance, High Temperature Resistance, Good Toughness.
Fit For Pipe Size: 6 Inch; Outer Diameter: 275Mm / 10.83 Inch; Inner Diameter: 159Mm / 6.26 Inch; Thickness: 3.5Mm / 0.14 Inch.
Features
- Flange gaskets are designed to seal the space between 2 sections of pipe, prevents them from flare out. Mainly used for valve pipeline and flange installation
- Fit for Pipe Size: 6 inch; Outer Diameter: 275mm / 10.83 inch; Inner Diameter: 159mm / 6.26 inch; Thickness: 3.5mm / 0.14 inch
- Bolt Hole Quantity: 8; Bolt Hole Inside Diameter: 24mm / 0.94 inch; Working Pressure: Less than 0.05MPa; Working Temperature Range: -40 C to 230 C (-40 F to 446 F)
- The flat gaskets are used wherever a union or flange is required to prevent leaking. Corrosion resistance, high temperature resistance, good toughness
- Please select the correct dimensions required before purchase. It is recommended to install with a torque wrench (NOT included)
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon Similar To MECCANIXITY Rubber Flange Gasket Full
#1
MECCANIXITY Silicone Rubber Gasket Industrial Flange O-Ring for 4.5 Inch Clamp White
Asin: B09J9WZ71J | Model: mea210817ee0338 | PartNumber: mea210817ee0338
Installation Diameter: 122Mm / 4.8 Inch; Hardness: 50A; Working Temperature Range: -30°C To 200°C (-22°F To 392°F).
The Industrial Gasket Is Not Suitable For Vacuum Flanges, Please Select The Correct Size And Model Required Before Purchasing. Make Sure To Do Not Begrime The Gasket.
Easy And Quick Installation And Replacement. Good Electrical Insulation, Heat And Cold Resistance, Ozone Resistance, Weather Resistance.
Fit For 4.5 Inch Clamp; Outer Diameter: 130Mm / 5.12 Inch; Inner Diameter: 111Mm / 4.37 Inch; Thickness: 5.4Mm / 0.21 Inch (Please Check The Size Before Purchasing, Fit Inch Is Not The Size Of The Product Itself).
Features
- The clamp gaskets are used to make a secure, leak-proof connection between clamp ferrules or flanges fittings. Not suitable for regular sealed jars
- Fit for 4.5 inch clamp; Outer Diameter: 130mm / 5.12 inch; Inner Diameter: 111mm / 4.37 inch; Thickness: 5.4mm / 0.21 inch (Please check the size before purchasing, fit inch is not the size of the product itself)
- Installation Diameter: 122mm / 4.8 inch; Hardness: 50A; Working Temperature Range: -30 C to 200 C (-22 F to 392 F)
- Easy and quick installation and replacement. Good electrical insulation, heat and cold resistance, ozone resistance, weather resistance
- The industrial gasket is not suitable for vacuum flanges, please select the correct size and model required before purchasing. Make sure to do not begrime the gasket
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #2
MECCANIXITY Silicone Rubber Gasket Industrial Flange O-Ring for 3.5 Inch Clamp White Pack of 5
Asin: B09JB37VJ2 | Model: mea210817ee0333 | PartNumber: mea210817ee0333
Installation Diameter: 98Mm / 3.86 Inch; Hardness: 50A; Working Temperature Range: -30°C To 200°C (-22°F To 392°F).
The Industrial Gasket Is Not Suitable For Vacuum Flanges, Please Select The Correct Size And Model Required Before Purchasing. Make Sure To Do Not Begrime The Gasket.
Easy And Quick Installation And Replacement. Good Electrical Insulation, Heat And Cold Resistance, Ozone Resistance, Weather Resistance.
Fit For 3.5 Inch Clamp; Outer Diameter: 106Mm / 4.17 Inch; Inner Diameter: 85Mm / 3.35 Inch; Thickness: 5.4Mm / 0.21 Inch (Please Check The Size Before Purchasing, Fit Inch Is Not The Size Of The Product Itself).
Features
- The clamp gaskets are used to make a secure, leak-proof connection between clamp ferrules or flanges fittings. Not suitable for regular sealed jars
- Fit for 3.5 inch clamp; Outer Diameter: 106mm / 4.17 inch; Inner Diameter: 85mm / 3.35 inch; Thickness: 5.4mm / 0.21 inch (Please check the size before purchasing, fit inch is not the size of the product itself)
- Installation Diameter: 98mm / 3.86 inch; Hardness: 50A; Working Temperature Range: -30 C to 200 C (-22 F to 392 F)
- Easy and quick installation and replacement. Good electrical insulation, heat and cold resistance, ozone resistance, weather resistance
- The industrial gasket is not suitable for vacuum flanges, please select the correct size and model required before purchasing. Make sure to do not begrime the gasket
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #3
MECCANIXITY Silicone Rubber Gasket Industrial Flange O-Ring for 4.5 Inch Clamp White Pack of 2
Asin: B09JB5M2GH | Model: mea210817ee0339 | PartNumber: mea210817ee0339
Installation Diameter: 122Mm / 4.8 Inch; Hardness: 50A; Working Temperature Range: -30°C To 200°C (-22°F To 392°F).
The Industrial Gasket Is Not Suitable For Vacuum Flanges, Please Select The Correct Size And Model Required Before Purchasing. Make Sure To Do Not Begrime The Gasket.
Easy And Quick Installation And Replacement. Good Electrical Insulation, Heat And Cold Resistance, Ozone Resistance, Weather Resistance.
Fit For 4.5 Inch Clamp; Outer Diameter: 130Mm / 5.12 Inch; Inner Diameter: 111Mm / 4.37 Inch; Thickness: 5.4Mm / 0.21 Inch (Please Check The Size Before Purchasing, Fit Inch Is Not The Size Of The Product Itself).
Features
- The clamp gaskets are used to make a secure, leak-proof connection between clamp ferrules or flanges fittings. Not suitable for regular sealed jars
- Fit for 4.5 inch clamp; Outer Diameter: 130mm / 5.12 inch; Inner Diameter: 111mm / 4.37 inch; Thickness: 5.4mm / 0.21 inch (Please check the size before purchasing, fit inch is not the size of the product itself)
- Installation Diameter: 122mm / 4.8 inch; Hardness: 50A; Working Temperature Range: -30 C to 200 C (-22 F to 392 F)
- Easy and quick installation and replacement. Good electrical insulation, heat and cold resistance, ozone resistance, weather resistance
- The industrial gasket is not suitable for vacuum flanges, please select the correct size and model required before purchasing. Make sure to do not begrime the gasket
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #4
MECCANIXITY Rubber Flange Gasket Full Face for 4 Inch DN100 Pipe 8 Bolt Holes Black Flat Washer
Asin: B09J144MKM | Model: mea210729ee0152 | PartNumber: mea210729ee0152
Bolt Hole Quantity: 8; Bolt Hole Inside Diameter: 20Mm / 0.79 Inch; Working Pressure: Less Than 0.05Mpa; Working Temperature Range: -40°C To 230°C (-40°F To 446°F).
Please Select The Correct Dimensions Required Before Purchase. It Is Recommended To Install With A Torque Wrench (Not Included).
The Flat Gaskets Are Used Wherever A Union Or Flange Is Required To Prevent Leaking. Corrosion Resistance, High Temperature Resistance, Good Toughness.
Fit For Pipe Size: 4 Inch; Outer Diameter: 215Mm / 8.46 Inch; Inner Diameter: 110Mm / 4.33 Inch; Thickness: 3.5Mm / 0.14 Inch.
Features
- Flange gaskets are designed to seal the space between 2 sections of pipe, prevents them from flare out. Mainly used for valve pipeline and flange installation
- Fit for Pipe Size: 4 inch; Outer Diameter: 215mm / 8.46 inch; Inner Diameter: 110mm / 4.33 inch; Thickness: 3.5mm / 0.14 inch
- Bolt Hole Quantity: 8; Bolt Hole Inside Diameter: 20mm / 0.79 inch; Working Pressure: Less than 0.05MPa; Working Temperature Range: -40 C to 230 C (-40 F to 446 F)
- The flat gaskets are used wherever a union or flange is required to prevent leaking. Corrosion resistance, high temperature resistance, good toughness
- Please select the correct dimensions required before purchase. It is recommended to install with a torque wrench (NOT included)
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #5
MECCANIXITY PTFE Flat Washers 18mm OD 10mm ID 2mm Thick Flange Gasket, White Pack of 20
Asin: B09CL3NNY3 | Model: mea210430ee0268 | PartNumber: mea210430ee0268
Draw Rate: 193%; Density: 2.19G/Cm³; Dynamic Friction Factor: 0.06; Dielectric Strength: 15Kv/Mm; Tensile Strength: 19.5Mpa; Compressive Strength: 12Mpa.
Mainly Used As Electrical Insulation Materials And Linings To Contact With Corrosive Media, Supporting Sliders, Guide Rail Seals, And Lubricating Materials. Widely Applied In The Flange Sealing Of Chemical Industry, Metallurgy, Machinery, Electronics, Electrical Appliances, Construction, Etc..
The 50A Hardness Sealing Gasket Provides A Bearing Surface For Fastener Load Distribution Or Is Used As A Spacer Between Components.
18Mm / 0.7" O.D. X 10Mm / 0.4" I.D. X 2Mm / 0.08" Thick; Working Temperature Range: -200°C To 250°C (-328°F To 482°F).
Features
- With excellent corrosion resistance, good self-lubrication, non-conductive, and non-adhesion, has wear resistance, pressure resistance, high voltage resistance, and low friction coefficient
- 18mm / 0.7 O.D. x 10mm / 0.4 I.D. x 2mm / 0.08 Thick; Working Temperature Range: -200 C to 250 C (-328 F to 482 F)
- Draw rate: 193%; Density: 2.19g/cm ; Dynamic Friction Factor: 0.06; Dielectric Strength: 15KV/mm; Tensile Strength: 19.5Mpa; Compressive Strength: 12Mpa
- The 50A hardness sealing gasket provides a bearing surface for fastener load distribution or is used as a spacer between components
- Mainly used as electrical insulation materials and linings to contact with corrosive media, supporting sliders, guide rail seals, and lubricating materials. Widely applied in the flange sealing of chemical industry, metallurgy, machinery, electronics, electrical appliances, construction, etc.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #6
MECCANIXITY Rubber Flange Gasket Full Face for 4 Inch DN100 Pipe 8 Bolt Holes Black Flat Washer Pack of 2
Asin: B09J157LZJ | Model: mea210729ee0153 | PartNumber: mea210729ee0153
Bolt Hole Quantity: 8; Bolt Hole Inside Diameter: 20Mm / 0.79 Inch; Working Pressure: Less Than 0.05Mpa; Working Temperature Range: -40°C To 230°C (-40°F To 446°F).
Please Select The Correct Dimensions Required Before Purchase. It Is Recommended To Install With A Torque Wrench (Not Included).
The Flat Gaskets Are Used Wherever A Union Or Flange Is Required To Prevent Leaking. Corrosion Resistance, High Temperature Resistance, Good Toughness.
Fit For Pipe Size: 4 Inch; Outer Diameter: 215Mm / 8.46 Inch; Inner Diameter: 110Mm / 4.33 Inch; Thickness: 3.5Mm / 0.14 Inch.
Features
- Flange gaskets are designed to seal the space between 2 sections of pipe, prevents them from flare out. Mainly used for valve pipeline and flange installation
- Fit for Pipe Size: 4 inch; Outer Diameter: 215mm / 8.46 inch; Inner Diameter: 110mm / 4.33 inch; Thickness: 3.5mm / 0.14 inch
- Bolt Hole Quantity: 8; Bolt Hole Inside Diameter: 20mm / 0.79 inch; Working Pressure: Less than 0.05MPa; Working Temperature Range: -40 C to 230 C (-40 F to 446 F)
- The flat gaskets are used wherever a union or flange is required to prevent leaking. Corrosion resistance, high temperature resistance, good toughness
- Please select the correct dimensions required before purchase. It is recommended to install with a torque wrench (NOT included)
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #7
MECCANIXITY Fluorine Rubber Gasket Flange O-Ring for 1.5 Inch Vacuum Clamp Black Pack of 2
Asin: B09JB7329G | Model: mea210803ee0064 | PartNumber: mea210803ee0064
Installation Diameter: 44Mm / 1.73 Inch; Hardness: 70A; Working Temperature Range: -30°C To 280°C (-22°F To 536°F).
Please Select The Correct Dimensions Required Before Purchase. Make Sure To Do Not Begrime The Gasket.
Quick Installation Chuck Connection, Easy And Fast Installation And Replacement. Good Sealing Performance. Corrosion And High Temperature Resistance.
Fit Size: 1.5 Inch; Outer Diameter: 50.5Mm / 1.99 Inch; Inner Diameter: 35Mm / 1.38 Inch; Thickness: 2Mm / 0.08 Inch.
Features
- The clamp gaskets are used to make a secure, leak-proof connection between clamp ferrules or flanges fittings. Mainly used for sealing in industry, metallurgical manufacturing, water supply
- Fit Size: 1.5 inch; Outer Diameter: 50.5mm / 1.99 inch; Inner Diameter: 35mm / 1.38 inch; Thickness: 2mm / 0.08 inch
- Installation Diameter: 44mm / 1.73 inch; Hardness: 70A; Working Temperature Range: -30 C to 280 C (-22 F to 536 F)
- Quick installation chuck connection, easy and fast installation and replacement. Good sealing performance. Corrosion and high temperature resistance
- Please select the correct dimensions required before purchase. Make sure to do not begrime the gasket
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #8
MECCANIXITY Bonded Sealing Washers M16 21.5x13.8x3mm Carbon Steel Nitrile Rubber Gasket, Pack of 50
Asin: B09F38R49P | Model: mea210529ee0035 | PartNumber: mea210529ee0035
Fit For Size: M16; Outer Diameter: 21.5Mm; Inner Diameter: 13.8Mm; Thickness: 3Mm.
The Self-Centering Bonded Washers Are High-Pressure Seals That Are Used In The Mechanical, Hydraulic, And Pneumatic Pipelines.
Because The Bonded Washer Itself Acts To Retain The Gasket Material, There Is No Need For The Parts To Be Sealed To Be Shaped To Retain The Gasket. This Results In Simplified Machining And Greater Ease Of Use As Compared To Some Other Seals, Such As O-Rings.
Materials: Galvanized Carbon Steel; Nitrile Butadiene Rubber (Nbr): Hardness: 60A; Working Temperature Range: -20°C To 100°C (-4°F To 212°F).
Features
- The nitrile rubber is bonded by heat and pressure to the outer ring, which holds it in place. This structure increases resistance to bursting, increasing the pressure rating of the seal
- Materials: Galvanized Carbon Steel; Nitrile Butadiene Rubber (NBR): Hardness: 60A; Working Temperature Range: -20 C to 100 C (-4 F to 212 F)
- Fit for Size: M16; Outer Diameter: 21.5mm; Inner Diameter: 13.8mm; Thickness: 3mm
- Because the bonded washer itself acts to retain the gasket material, there is no need for the parts to be sealed to be shaped to retain the gasket. This results in simplified machining and greater ease of use as compared to some other seals, such as O-rings
- The self-centering bonded washers are high-pressure seals that are used in the Mechanical, Hydraulic, and Pneumatic pipelines
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #9
MECCANIXITY Rubber Flange Gasket Full Face for 3 Inch DN65 Pipe 4 Bolt Holes Black Flat Washer Pack of 5
Asin: B09J15DYLF | Model: mea210729ee0147 | PartNumber: mea210729ee0147
Bolt Hole Quantity: 4; Bolt Hole Inside Diameter: 20Mm / 0.79 Inch; Working Pressure: Less Than 0.05Mpa; Working Temperature Range: -40°C To 230°C (-40°F To 446°F).
Please Select The Correct Dimensions Required Before Purchase. It Is Recommended To Install With A Torque Wrench (Not Included).
The Flat Gaskets Are Used Wherever A Union Or Flange Is Required To Prevent Leaking. Corrosion Resistance, High Temperature Resistance, Good Toughness.
Fit For Pipe Size: 3 Inch; Outer Diameter: 185Mm / 7.28 Inch; Inner Diameter: 77Mm / 3.03 Inch; Thickness: 3.5Mm / 0.14 Inch.
Features
- Flange gaskets are designed to seal the space between 2 sections of pipe, prevents them from flare out. Mainly used for valve pipeline and flange installation
- Fit for Pipe Size: 3 inch; Outer Diameter: 185mm / 7.28 inch; Inner Diameter: 77mm / 3.03 inch; Thickness: 3.5mm / 0.14 inch
- Bolt Hole Quantity: 4; Bolt Hole Inside Diameter: 20mm / 0.79 inch; Working Pressure: Less than 0.05MPa; Working Temperature Range: -40 C to 230 C (-40 F to 446 F)
- The flat gaskets are used wherever a union or flange is required to prevent leaking. Corrosion resistance, high temperature resistance, good toughness
- Please select the correct dimensions required before purchase. It is recommended to install with a torque wrench (NOT included)
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #10
MECCANIXITY Rubber Flange Gasket Full Face for 10 Inch DN250 Pipe 12 Bolt Hole Black Flat Washer
Asin: B09J1549L4 | Model: mea210729ee0164 | PartNumber: mea210729ee0164
Bolt Hole Quantity: 12; Bolt Hole Inside Diameter: 26Mm / 1 Inch; Working Pressure: Less Than 0.05Mpa; Working Temperature Range: -40°C To 230°C (-40°F To 446°F).
Please Select The Correct Dimensions Required Before Purchase. It Is Recommended To Install With A Torque Wrench (Not Included).
The Flat Gaskets Are Used Wherever A Union Or Flange Is Required To Prevent Leaking. Corrosion Resistance, High Temperature Resistance, Good Toughness.
Fit For Pipe Size: 10 Inch; Outer Diameter: 395Mm / 15.55 Inch; Inner Diameter: 273Mm / 10.75 Inch; Thickness: 4Mm / 0.16 Inch.
Features
- Flange gaskets are designed to seal the space between 2 sections of pipe, prevents them from flare out. Mainly used for valve pipeline and flange installation
- Fit for Pipe Size: 10 inch; Outer Diameter: 395mm / 15.55 inch; Inner Diameter: 273mm / 10.75 inch; Thickness: 4mm / 0.16 inch
- Bolt Hole Quantity: 12; Bolt Hole Inside Diameter: 26mm / 1 inch; Working Pressure: Less than 0.05MPa; Working Temperature Range: -40 C to 230 C (-40 F to 446 F)
- The flat gaskets are used wherever a union or flange is required to prevent leaking. Corrosion resistance, high temperature resistance, good toughness
- Please select the correct dimensions required before purchase. It is recommended to install with a torque wrench (NOT included)
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #11
MECCANIXITY PTFE Flat Washers 22mm OD 12mm ID 2mm Thick Flange Gasket, White Pack of 10
Asin: B09CL3QZK4 | Model: mea210430ee0290 | PartNumber: mea210430ee0290
Draw Rate: 193%; Density: 2.19G/Cm³; Dynamic Friction Factor: 0.06; Dielectric Strength: 15Kv/Mm; Tensile Strength: 19.5Mpa; Compressive Strength: 12Mpa.
Mainly Used As Electrical Insulation Materials And Linings To Contact With Corrosive Media, Supporting Sliders, Guide Rail Seals, And Lubricating Materials. Widely Applied In The Flange Sealing Of Chemical Industry, Metallurgy, Machinery, Electronics, Electrical Appliances, Construction, Etc..
The 50A Hardness Sealing Gasket Provides A Bearing Surface For Fastener Load Distribution Or Is Used As A Spacer Between Components.
22Mm / 0.87" O.D. X 12Mm / 0.47" I.D. X 2Mm / 0.08" Thick; Working Temperature Range: -200°C To 250°C (-328°F To 482°F).
Features
- With excellent corrosion resistance, good self-lubrication, non-conductive, and non-adhesion, has wear resistance, pressure resistance, high voltage resistance, and low friction coefficient
- 22mm / 0.87 O.D. x 12mm / 0.47 I.D. x 2mm / 0.08 Thick; Working Temperature Range: -200 C to 250 C (-328 F to 482 F)
- Draw rate: 193%; Density: 2.19g/cm ; Dynamic Friction Factor: 0.06; Dielectric Strength: 15KV/mm; Tensile Strength: 19.5Mpa; Compressive Strength: 12Mpa
- The 50A hardness sealing gasket provides a bearing surface for fastener load distribution or is used as a spacer between components
- Mainly used as electrical insulation materials and linings to contact with corrosive media, supporting sliders, guide rail seals, and lubricating materials. Widely applied in the flange sealing of chemical industry, metallurgy, machinery, electronics, electrical appliances, construction, etc.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #12
MECCANIXITY Nitrile Rubber O-Rings 16mm 17mm 18mm OD 12mm 13mm 14mm ID 2mm Thick Seal Gasket, Black 30in1 Set
Asin: B09QG331DZ | Model: mef211022ee0030 | PartNumber: mef211022ee0030
Material: Nitrile Butadiene Rubber; Hardness: 70A; Temperature Range: -4℉ (-20℃) To 212℉ (100℃); Package Contents: 10Pcs X 16X12x2mm O-Rings, 10Pcs X 17X13x2mm O-Rings, 10Pcs X 18X14x2mm O-Rings.
Please Confirm The Required Size And Material Before Purchase, And Install It In The Right Place.
Widely Used For Heat Exchanger, Boiler, Filter, Blender, Coffee Machine, Plumbing, Doors And Window, Household Electrical Appliance, Electronic Instruments And So On.
Cross-Section Diameter: 2Mm / 0.08-Inch; Inner Diameter: 12Mm / 0.47-Inch; 13Mm / 0.51-Inch; 14Mm / 0.55-Inch; Outer Diameter: 16Mm / 0.63-Inch; 17Mm / 0.67-Inch; 18Mm / 0.71-Inch.
Features
- Good mechanical properties when compared with other elastomers and high wear resistance. Good resistance to many petroleum oils, greases, hydraulic fluids, mineral oil and grease
- Cross-Section Diameter: 2mm / 0.08-inch; Inner Diameter: 12mm / 0.47-inch; 13mm / 0.51-inch; 14mm / 0.55-inch; Outer Diameter: 16mm / 0.63-inch; 17mm / 0.67-inch; 18mm / 0.71-inch
- Material: Nitrile Butadiene Rubber; Hardness: 70A; Temperature Range: -4 (-20 ) to 212 (100 ); Package Contents: 10pcs x 16x12x2mm O-Rings, 10pcs x 17x13x2mm O-Rings, 10pcs x 18x14x2mm O-Rings
- Widely used for heat exchanger, boiler, filter, blender, coffee machine, plumbing, doors and window, household electrical appliance, electronic instruments and so on
- Please confirm the required size and material before purchase, and install it in the right place
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #13
MECCANIXITY Bonded Sealing Washers M14 19.6x11.5x3mm Carbon Steel Nitrile Rubber Gasket, Pack of 10
Asin: B09DYQTMKX | Model: mea210529ee0032 | PartNumber: mea210529ee0032
Fit For Size: M14; Outer Diameter: 19.6Mm; Inner Diameter: 11.5Mm; Thickness: 3Mm.
The Self-Centering Bonded Washers Are High-Pressure Seals That Are Used In The Mechanical, Hydraulic, And Pneumatic Pipelines.
Because The Bonded Washer Itself Acts To Retain The Gasket Material, There Is No Need For The Parts To Be Sealed To Be Shaped To Retain The Gasket. This Results In Simplified Machining And Greater Ease Of Use As Compared To Some Other Seals, Such As O-Rings.
Materials: Galvanized Carbon Steel; Nitrile Butadiene Rubber (Nbr): Hardness: 60A; Working Temperature Range: -20°C To 100°C (-4°F To 212°F).
Features
- The nitrile rubber is bonded by heat and pressure to the outer ring, which holds it in place. This structure increases resistance to bursting, increasing the pressure rating of the seal
- Materials: Galvanized Carbon Steel; Nitrile Butadiene Rubber (NBR): Hardness: 60A; Working Temperature Range: -20 C to 100 C (-4 F to 212 F)
- Fit for Size: M14; Outer Diameter: 19.6mm; Inner Diameter: 11.5mm; Thickness: 3mm
- Because the bonded washer itself acts to retain the gasket material, there is no need for the parts to be sealed to be shaped to retain the gasket. This results in simplified machining and greater ease of use as compared to some other seals, such as O-rings
- The self-centering bonded washers are high-pressure seals that are used in the Mechanical, Hydraulic, and Pneumatic pipelines
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #14
MECCANIXITY Rubber Flange Gasket Full Face for 3 Inch DN65 Pipe 4 Bolt Holes Black Flat Washer
Asin: B09J14MQ4Y | Model: mea210729ee0146 | PartNumber: mea210729ee0146
Bolt Hole Quantity: 4; Bolt Hole Inside Diameter: 20Mm / 0.79 Inch; Working Pressure: Less Than 0.05Mpa; Working Temperature Range: -40°C To 230°C (-40°F To 446°F).
Please Select The Correct Dimensions Required Before Purchase. It Is Recommended To Install With A Torque Wrench (Not Included).
The Flat Gaskets Are Used Wherever A Union Or Flange Is Required To Prevent Leaking. Corrosion Resistance, High Temperature Resistance, Good Toughness.
Fit For Pipe Size: 3 Inch; Outer Diameter: 185Mm / 7.28 Inch; Inner Diameter: 77Mm / 3.03 Inch; Thickness: 3.5Mm / 0.14 Inch.
Features
- Flange gaskets are designed to seal the space between 2 sections of pipe, prevents them from flare out. Mainly used for valve pipeline and flange installation
- Fit for Pipe Size: 3 inch; Outer Diameter: 185mm / 7.28 inch; Inner Diameter: 77mm / 3.03 inch; Thickness: 3.5mm / 0.14 inch
- Bolt Hole Quantity: 4; Bolt Hole Inside Diameter: 20mm / 0.79 inch; Working Pressure: Less than 0.05MPa; Working Temperature Range: -40 C to 230 C (-40 F to 446 F)
- The flat gaskets are used wherever a union or flange is required to prevent leaking. Corrosion resistance, high temperature resistance, good toughness
- Please select the correct dimensions required before purchase. It is recommended to install with a torque wrench (NOT included)
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #15
MECCANIXITY Rubber Flange Gasket Full Face for 3 Inch DN65 Pipe 4 Bolt Holes Black Flat Washer Pack of 10
Asin: B09J14VQCZ | Model: mea210729ee0148 | PartNumber: mea210729ee0148
Bolt Hole Quantity: 4; Bolt Hole Inside Diameter: 20Mm / 0.79 Inch; Working Pressure: Less Than 0.05Mpa; Working Temperature Range: -40°C To 230°C (-40°F To 446°F).
Please Select The Correct Dimensions Required Before Purchase. It Is Recommended To Install With A Torque Wrench (Not Included).
The Flat Gaskets Are Used Wherever A Union Or Flange Is Required To Prevent Leaking. Corrosion Resistance, High Temperature Resistance, Good Toughness.
Fit For Pipe Size: 3 Inch; Outer Diameter: 185Mm / 7.28 Inch; Inner Diameter: 77Mm / 3.03 Inch; Thickness: 3.5Mm / 0.14 Inch.
Features
- Flange gaskets are designed to seal the space between 2 sections of pipe, prevents them from flare out. Mainly used for valve pipeline and flange installation
- Fit for Pipe Size: 3 inch; Outer Diameter: 185mm / 7.28 inch; Inner Diameter: 77mm / 3.03 inch; Thickness: 3.5mm / 0.14 inch
- Bolt Hole Quantity: 4; Bolt Hole Inside Diameter: 20mm / 0.79 inch; Working Pressure: Less than 0.05MPa; Working Temperature Range: -40 C to 230 C (-40 F to 446 F)
- The flat gaskets are used wherever a union or flange is required to prevent leaking. Corrosion resistance, high temperature resistance, good toughness
- Please select the correct dimensions required before purchase. It is recommended to install with a torque wrench (NOT included)
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #16
MECCANIXITY Bonded Sealing Washers 12x4.2x2.8mm Stainless Steel EPDM Rubber Backed Screw Gasket, Pack of 200
Asin: B09DGG5L5Z | Model: mea210531ee0449 | PartNumber: mea210531ee0449
304 Stainless Steel Is Austenitic Stainless Steel, Austenite Is Partially Transformed Into Martensite (Magnetic) During The Cold Working Process, So It Will Non-Magnetic Or Weakly Magnetic.
It Can Avoid Thermal Expansion And Cold Contraction During Installation, Improve The Fastening Effect, Sealing, Dust-Proof, And Waterproof Functions. Also Serves As A Cushion Protecting From Vibration.
The One-Piece Gasket Is Slightly Angled Surface But Flattened As It's Tightened. The Bonded Sealing Gasket Provides An Airtight Seal Between The Bolt Or Screw And The Hard Surface.
Outer Diameter: 12Mm; Inner Diameter: 4.2Mm; Thickness: 2.8Mm.
Features
- The composite screw washer is suitable for outdoor or humid environment, no rust, corrosion resistance, acid resistance, better water resistance and applicability, and not easy to break
- Outer Diameter: 12mm; Inner Diameter: 4.2mm; Thickness: 2.8mm
- 304 stainless steel is austenitic stainless steel, austenite is partially transformed into martensite (magnetic) during the cold working process, so it will non-magnetic or weakly magnetic
- The one-piece gasket is slightly angled surface but flattened as it's tightened. The bonded sealing gasket provides an airtight seal between the bolt or screw and the hard surface
- It can avoid thermal expansion and cold contraction during installation, improve the fastening effect, sealing, dust-proof, and waterproof functions. Also serves as a cushion protecting from vibration
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #17
MECCANIXITY PTFE Flat Washers 18mm OD 10mm ID 2mm Thick Flange Gasket, White Pack of 5
Asin: B09CL3WRYS | Model: mea210430ee0267 | PartNumber: mea210430ee0267
Draw Rate: 193%; Density: 2.19G/Cm³; Dynamic Friction Factor: 0.06; Dielectric Strength: 15Kv/Mm; Tensile Strength: 19.5Mpa; Compressive Strength: 12Mpa.
Mainly Used As Electrical Insulation Materials And Linings To Contact With Corrosive Media, Supporting Sliders, Guide Rail Seals, And Lubricating Materials. Widely Applied In The Flange Sealing Of Chemical Industry, Metallurgy, Machinery, Electronics, Electrical Appliances, Construction, Etc..
The 50A Hardness Sealing Gasket Provides A Bearing Surface For Fastener Load Distribution Or Is Used As A Spacer Between Components.
18Mm / 0.7" O.D. X 10Mm / 0.4" I.D. X 2Mm / 0.08" Thick; Working Temperature Range: -200°C To 250°C (-328°F To 482°F).
Features
- With excellent corrosion resistance, good self-lubrication, non-conductive, and non-adhesion, has wear resistance, pressure resistance, high voltage resistance, and low friction coefficient
- 18mm / 0.7 O.D. x 10mm / 0.4 I.D. x 2mm / 0.08 Thick; Working Temperature Range: -200 C to 250 C (-328 F to 482 F)
- Draw rate: 193%; Density: 2.19g/cm ; Dynamic Friction Factor: 0.06; Dielectric Strength: 15KV/mm; Tensile Strength: 19.5Mpa; Compressive Strength: 12Mpa
- The 50A hardness sealing gasket provides a bearing surface for fastener load distribution or is used as a spacer between components
- Mainly used as electrical insulation materials and linings to contact with corrosive media, supporting sliders, guide rail seals, and lubricating materials. Widely applied in the flange sealing of chemical industry, metallurgy, machinery, electronics, electrical appliances, construction, etc.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #18
MECCANIXITY PTFE Flat Washers 22mm OD 12mm ID 2mm Thick Flange Gasket, White Pack of 5
Asin: B09CL23ZPJ | Model: mea210430ee0291 | PartNumber: mea210430ee0291
Draw Rate: 193%; Density: 2.19G/Cm³; Dynamic Friction Factor: 0.06; Dielectric Strength: 15Kv/Mm; Tensile Strength: 19.5Mpa; Compressive Strength: 12Mpa.
Mainly Used As Electrical Insulation Materials And Linings To Contact With Corrosive Media, Supporting Sliders, Guide Rail Seals, And Lubricating Materials. Widely Applied In The Flange Sealing Of Chemical Industry, Metallurgy, Machinery, Electronics, Electrical Appliances, Construction, Etc..
The 50A Hardness Sealing Gasket Provides A Bearing Surface For Fastener Load Distribution Or Is Used As A Spacer Between Components.
22Mm / 0.87" O.D. X 12Mm / 0.47" I.D. X 2Mm / 0.08" Thick; Working Temperature Range: -200°C To 250°C (-328°F To 482°F).
Features
- With excellent corrosion resistance, good self-lubrication, non-conductive, and non-adhesion, has wear resistance, pressure resistance, high voltage resistance, and low friction coefficient
- 22mm / 0.87 O.D. x 12mm / 0.47 I.D. x 2mm / 0.08 Thick; Working Temperature Range: -200 C to 250 C (-328 F to 482 F)
- Draw rate: 193%; Density: 2.19g/cm ; Dynamic Friction Factor: 0.06; Dielectric Strength: 15KV/mm; Tensile Strength: 19.5Mpa; Compressive Strength: 12Mpa
- The 50A hardness sealing gasket provides a bearing surface for fastener load distribution or is used as a spacer between components
- Mainly used as electrical insulation materials and linings to contact with corrosive media, supporting sliders, guide rail seals, and lubricating materials. Widely applied in the flange sealing of chemical industry, metallurgy, machinery, electronics, electrical appliances, construction, etc.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #19
MECCANIXITY Bonded Sealing Washers 12x4.2x2.8mm Stainless Steel EPDM Rubber Backed Screw Gasket, Pack of 100
Asin: B09DGGVCY8 | Model: mea210531ee0448 | PartNumber: mea210531ee0448
304 Stainless Steel Is Austenitic Stainless Steel, Austenite Is Partially Transformed Into Martensite (Magnetic) During The Cold Working Process, So It Will Non-Magnetic Or Weakly Magnetic.
It Can Avoid Thermal Expansion And Cold Contraction During Installation, Improve The Fastening Effect, Sealing, Dust-Proof, And Waterproof Functions. Also Serves As A Cushion Protecting From Vibration.
The One-Piece Gasket Is Slightly Angled Surface But Flattened As It's Tightened. The Bonded Sealing Gasket Provides An Airtight Seal Between The Bolt Or Screw And The Hard Surface.
Outer Diameter: 12Mm; Inner Diameter: 4.2Mm; Thickness: 2.8Mm.
Features
- The composite screw washer is suitable for outdoor or humid environment, no rust, corrosion resistance, acid resistance, better water resistance and applicability, and not easy to break
- Outer Diameter: 12mm; Inner Diameter: 4.2mm; Thickness: 2.8mm
- 304 stainless steel is austenitic stainless steel, austenite is partially transformed into martensite (magnetic) during the cold working process, so it will non-magnetic or weakly magnetic
- The one-piece gasket is slightly angled surface but flattened as it's tightened. The bonded sealing gasket provides an airtight seal between the bolt or screw and the hard surface
- It can avoid thermal expansion and cold contraction during installation, improve the fastening effect, sealing, dust-proof, and waterproof functions. Also serves as a cushion protecting from vibration
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #20
MECCANIXITY PTFE Flat Washers 18mm OD 10mm ID 2mm Thick Flange Gasket, White Pack of 30
Asin: B09CL3VJJY | Model: mea210430ee0286 | PartNumber: mea210430ee0286
Draw Rate: 193%; Density: 2.19G/Cm³; Dynamic Friction Factor: 0.06; Dielectric Strength: 15Kv/Mm; Tensile Strength: 19.5Mpa; Compressive Strength: 12Mpa.
Mainly Used As Electrical Insulation Materials And Linings To Contact With Corrosive Media, Supporting Sliders, Guide Rail Seals, And Lubricating Materials. Widely Applied In The Flange Sealing Of Chemical Industry, Metallurgy, Machinery, Electronics, Electrical Appliances, Construction, Etc..
The 50A Hardness Sealing Gasket Provides A Bearing Surface For Fastener Load Distribution Or Is Used As A Spacer Between Components.
18Mm / 0.7" O.D. X 10Mm / 0.4" I.D. X 2Mm / 0.08" Thick; Working Temperature Range: -200°C To 250°C (-328°F To 482°F).
Features
- With excellent corrosion resistance, good self-lubrication, non-conductive, and non-adhesion, has wear resistance, pressure resistance, high voltage resistance, and low friction coefficient
- 18mm / 0.7 O.D. x 10mm / 0.4 I.D. x 2mm / 0.08 Thick; Working Temperature Range: -200 C to 250 C (-328 F to 482 F)
- Draw rate: 193%; Density: 2.19g/cm ; Dynamic Friction Factor: 0.06; Dielectric Strength: 15KV/mm; Tensile Strength: 19.5Mpa; Compressive Strength: 12Mpa
- The 50A hardness sealing gasket provides a bearing surface for fastener load distribution or is used as a spacer between components
- Mainly used as electrical insulation materials and linings to contact with corrosive media, supporting sliders, guide rail seals, and lubricating materials. Widely applied in the flange sealing of chemical industry, metallurgy, machinery, electronics, electrical appliances, construction, etc.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon
Looking For Something Else?
Search