JOYLASER High Power Co2 Laser Tube 220w260w280w300w400w500w600w for Laser Cutting or Engraving Machine 300w
Asin: B09JFYTNR4
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.3.Power:The Power Is Higher From 200-600W Compared To Common Laser Tube With The Same Length..
5.Reliability:The Discharge Raw Glass Tube Is Made From Germany.The Perfect Separation Technique Can Effective Block The Air And Prevent The Internal Gas From Spreading..
4.Lifespan:The Working Life Is Up To 10000 Hours Because Of The Catalyst Coated Discharge Tube With Processed Electrode..
2.Beam:It’S Adopted Adjustable Optical Resonant Cavity To Ensure The Beam Mode Is Up To Tem00..
Features
- 1.SX series CO2 laser tube is the multi-core in a single tube with our unique technology.
- 2.Beam:It s adopted adjustable optical resonant cavity to ensure the beam mode is up to TEM00.
- 3.Power:The power is higher from 200-600W compared to common laser tube with the same length.
- 4.Lifespan:The working life is up to 10000 hours because of the catalyst coated discharge tube with processed electrode.
- 5.Reliability:The discharge raw glass tube is made from Germany.The perfect separation technique can effective block the air and prevent the internal gas from spreading.
- See more on Amazon...
Brand: 通用 | Manufacturer: joylaser
See On Amazon Similar To JOYLASER High Power Co2 Laser
#1
EZshoot Compact Low Profile Gun Laser, Magnetic USB Green Laser Sight for Pistol Compatible with 20MM Rail and Ambidextrous ON/Off Switch
Asin: B0BRPPP9GW
Holding Zero And Remaining Accurate: No Problem With Zero After Repeated High Recoils! Hunting Laser Sight For Pistol Have Upgraded The Adjusting Screw, Super Easy To Adjust And Remains Accurate After Practicing..
≤0.65 Inch Installation Space: Ultra Compact Laser Sight, Fits For Pistol And Compatible With Standard 20Mm Picatinny Rail. Please Ensure The Installation Space Is More Than 0.65Inch(From Slot To The Trigger Guard) ..
Ambidextrous On/Off Control: Friendly On/Off Switch Design For Left/Right-Handed Users. The Placement Of The Switch Is Well Within Reach Of Your Index Finger And The Buttons Are Pressed Convinent So You Can Control Your Pistol Laser Quickly..
Magnetic Charging: Couldn't Be Easier And Perfect For Charging While On The Pistol! 40Mins Just Needed For Fully Charged And This Laser Sight Provides 4Hrs Running Time With Bright Laser..
Features
- Bright Green Laser Sight: Class IIIA Laser Sight, Max Output<5mW. This green laser for pistol features 515nm wavelength, which reaches 50yds during the day and up to 500yds at night, so this green laser beam is suitable for day and night hunting.
- Magnetic Charging: Couldn't be easier and perfect for charging while on the Pistol! 40mins just needed for fully charged and this laser sight provides 4hrs running time with bright laser.
- Holding Zero and Remaining Accurate: No problem with zero after repeated high recoils! Hunting laser sight for pistol have upgraded the adjusting screw, super easy to adjust and remains accurate after practicing.
- Ambidextrous ON/OFF Control: Friendly ON/OFF switch design for left/right-handed users. The placement of the switch is well within reach of your index finger and the buttons are pressed convinent so you can control your pistol laser quickly.
- 0.65 Inch Installation Space: Ultra compact laser sight, fits for pistol and compatible with standard 20mm picatinny rail. Please ensure the installation space is more than 0.65inch(from slot to the trigger guard) .
- See more on Amazon...
Brand: EZshoot | Manufacturer: EZshoot
Weight: 0.22 pounds
See On Amazon #2
Feyachi PL-19 Laser Sight Upgrade Airsoft Gun Lasers Low-Profile Compact Red Laser Sight with Picatinny/Weaver Rail for Pistol Handgun Rifle Shotgun
Asin: B0987FX5B1 | Model: Feyachi5019-N_VC | PartNumber: Feyachi5019-N_VC | Ean: 0793101309898 | UPC: 793101309898
High Accuracy, The Windage Adjustment And Elevation Adjustment Make It Easy To Zero..
Detachable 20Mm Picatinny/Weaver Rail, Mounts Securely Onto Standard Pistol Rail..
High Brightness, Low Profile, Lightweight And Compact. 1.2"L X 1.24"W X 0.07"H. Weight: 1.14Oz (Battery Included).
Machined From High-Strength Aircraft Aluminum Body Is Hard Anodized With A Mil-Spec Finish For Extreme Durability. Shock Proof, Can Handle The High Recoil..
Features
- IIIA Class Power Output 5mw red laser (650nm) for maximum visibility day or night. Reaches 50 meters during the day and up to 100 meters at night.
- Machined from High-strength aircraft aluminum body is hard anodized with a Mil-Spec finish for extreme durability. Shock proof, can handle the high recoil.
- High accuracy, the windage adjustment and elevation adjustment make it easy to zero.
- High brightness, low profile, lightweight and compact. 1.2L x 1.24W x 0.07H. Weight: 1.14oz (Battery included)
- Detachable 20mm Picatinny/weaver rail, mounts securely onto standard pistol rail.
- See more on Amazon...
Brand: Feyachi | Manufacturer: Feyachi
Dimensions: 1.20 x 3.70 x 2.80 inches | Weight: 0.07 pounds
Warranty: 1 month refund & replacement warranty
See On Amazon #3
JahyShow Tactical Red Dot Laser Sight Tactical for 20mm Rail with Alan Wrenches Easy and Bright
Asin: B072N581ZQ | Ean: 6920127012714
✔ Incredible Accuracy! Red Dot Laser Sight Adjust To Windage And Elevation For Day & Night Shooting. It Is Anti-Vibration, Fog-Proof And Shock-Resistant..
✔ Highly Visible! This Laser Is Very Powerful And Can Be Seen With The Naked Eye At Distances Of Up To 100 Meters!.
✔ Laser Wavelength! Power<1Mw 100M Class Ii Have Fda Certification.
Features
- COMPACT! 2.25" x 0.75" /57mm x 19mm. Compact but powerful in function, it s adjustable for windage and elevation.
- LASER WAVELENGTH! power<1mw 100m Class II have FDA certification
- INCREDIBLE ACCURACY! Red Dot Laser Sight Adjust to windage and elevation for day & night shooting. It is anti-vibration, fog-proof and shock-resistant.
- HIGHLY VISIBLE! This laser is very powerful and can be seen with the naked eye at distances of up to 100 meters!
- See more on Amazon...
Brand: JahyShow | Manufacturer: JahyShow
Weight: 0.13 pounds
See On Amazon #4
Cloudray 90W Laser Tube,CO2 Laser Tube 90W,100W CO2 Laser Tube,1250mm Dia.80mm Cable Preconnected with Coating,90 Watt C02 Laser Tube With Metal Head (CR90 90-100W)
Asin: B087FW741H | Model: CR90 | PartNumber: CR90 | Ean: 0053554513144 | UPC: 053554513144
【Quality Assurance】Cloudray Co2 Laser Tube Are Coated With Nano Gold Catalyst ,The Output Laser Is The Tem00 Mode, Which Has High Quality Beam Spot Concentration, High Energy Density As Well As Good And Stable Spot, Making Laser Machine With Better Performance.Apply Unique Glass Metal Sealing Technology, And Ensure A Longer Service Life Of The Co2 Laser Tube..
【Attention】 Each Cloudray Laser Tube Undergoes Thorough Testing Before Shipping, And We Take Care To Provide Secure Packaging For Safe Delivery. It's Important To Note That Co2 Laser Tubes Are Consumable Items, And Prolonged Storage May Result In Power Attenuation. Therefore, We Recommend Purchasing The Laser Tube When You Are Ready To Use It, Ensuring Optimal Performance..
【Installed Easily】 For Your Convenience, Cloudray Tube Have Been Pre-Connected The High Voltage End And Low Voltage Port, Along With The High Voltage Connector, Simplifying The Installation Process Of Your 90 Watt Laser.If You Require Any Assistance Of C02 Laser Tube , Please Don't Hesitate To Reach Out To Us Via Amazon..
【After Sales】We Are Committed To Providing Superior Service To Our Customers. If Any Issues Arise Within 10 Months Of Receiving The Laser Tube (Excluding Man-Made Damage), Please Provide Us With The Laser Tube Serial Number And Proof Of The Problem Via Photo Or Video. Upon Verification, We Will Promptly Send You A New Cloudray Tube..
Features
- Powerful Laser Tube CR90 90w co2 laser tube max 100W , Length1250mm Outer Dia.80mm.Before ordering, pls confirm the Diameter and Length of the co2 tube,great replacement for the same power or same length 90w laser tube (Pls make sure your machine has enough installation space, all spaces should be slightly larger than laser tube's size).
- After Sales We are committed to providing superior service to our customers. If any issues arise within 10 months of receiving the laser tube (excluding man-made damage), please provide us with the laser tube serial number and proof of the problem via photo or video. Upon verification, we will promptly send you a new cloudray tube.
- Quality Assurance Cloudray CO2 laser tube are coated with nano gold catalyst ,the output laser is the TEM00 mode, which has high quality beam spot concentration, high energy density as well as good and stable spot, making laser machine with better performance.Apply unique glass metal sealing technology, and ensure a longer service life of the CO2 laser tube.
- Installed Easily For your convenience, cloudray tube have been pre-connected the high voltage end and low voltage port, along with the high voltage connector, simplifying the installation process of your 90 watt laser.If you require any assistance of c02 laser tube , please don't hesitate to reach out to us via Amazon.
- Attention Each Cloudray laser tube undergoes thorough testing before shipping, and we take care to provide secure packaging for safe delivery. It's important to note that CO2 laser tubes are consumable items, and prolonged storage may result in power attenuation. Therefore, we recommend purchasing the laser tube when you are ready to use it, ensuring optimal performance.
- See more on Amazon...
Brand: Cloudray | Manufacturer: Cloudray
See On Amazon #5
Feyachi GL35 Green Laser Sight 520nm Tactical Laser for Rifle with 20mm Picatinny Mount and Pressure Switch Included(Khaki)
Asin: B0BZ3SNCLZ | Model: Feyachi3035SS_VC | PartNumber: Feyachi3035SS_VC | Ean: 0766646249486 | UPC: 766646249486
Dual Switch Mode--Comes With A Constant On Button Switch And A Momentary On Pressure Switch (2 Modes). Mlok And Picatinny Compatibility Remote Switch, Install To Mlok System, Simply Unscrewed And Replace With Mlok Screws That Come In The Kit..
Package & Service--1 X Green Laser Sight,1 X Offset Mount,1 X Press Switch,1 X Allen Wrench And Screw,1 X Instruction.1-Year Product Warranty, And 7×24 Hrs Friendly Customer Service..
Easy Adjustment--The Green Dot Laser Sight Is Precisely Adjusted With An External Adjustment Knob, Each Turn Is 1 Moa And No Tools Are Required. Adjustment Is Easily Accomplished And Always At Zero..
Rugged And Durable--Made Of Aerospace Grade Aluminum With Hard Anodized Surface To Withstand High Impact. Durable And Shockproof. Works Well In All Weather Conditions. Suitable For Novice And Professional Use In Any Environment..
Features
- POWERFUL Green LASER--Built with CLASS IIIA green laser sight (max output 5mw) featuring a wavelength of 532nm. up to 100 to 350 feet during the day and up to 1000 feet at night.
- RUGGED AND DURABLE--Made of aerospace grade aluminum with hard anodized surface to withstand high impact. Durable and shockproof. Works well in all weather conditions. Suitable for novice and professional use in any environment.
- DUAL SWITCH MODE--Comes with a constant on button switch and a momentary on pressure switch (2 modes). Mlok and Picatinny Compatibility Remote Switch, Install to Mlok system, simply unscrewed and replace with mlok screws that come in the kit.
- EASY ADJUSTMENT--The green dot laser sight is precisely adjusted with an external adjustment knob, each turn is 1 MOA and no tools are required. Adjustment is easily accomplished and always at zero.
- PACKAGE & SERVICE--1 x green laser sight,1 x Offset Mount,1 x Press Switch,1 x Allen Wrench and screw,1 x Instruction.1-year product warranty, and 7 24 hrs friendly customer service.
- See more on Amazon...
Brand: Feyachi | Manufacturer: Feyachi
Dimensions: 8.11 x 6.77 x 1.89 inches
Warranty: 1 year
See On Amazon #6
Inccala CO2 Laser Power Supply for Laser Tube 150W 110V CO2 Laser Power Supply with Display Screen for Laser Cutter and Engraver Machine
Asin: B0BTSNC6SZ
【Lcd Display】The External Lcd Display Can Timely Show Working Current Amperage, Water Protection System And Laser Out Light Status. This Greatly Facilitates The Monitoring Of The Laser System During The Engraving Process..
【Security Protection】We Inprove The Safety Performance Of This Laser Power Supply. With Well-Grounded Enclosure,The Input And Output Are Separated Completely Which Can Avoid Getting An Electric Shock. The Power Supply Can Work In Open-Circuit For A Short Time, Avoid The Damage Of Laser Power Supply..
【Convient Operation】The Start And Stop Of Laser Is Can Be Easily Controlled. The Power Supply Comes With Ttl Signal Indication,Water Through Signal Indication And Laser Output Indication. It Also Can Give Your Machine Additional Protection From Variable Mains Power And Any Open-Circuit Faults. There Is A 'Test' Button Can Speeds Fault Detection, Help You Slove System Problems..
【High Performance Power Supply】The Power Supply Has The Feature Of High-Efficiency And High-Frequency, Can Make Full Use Of The Performance Of The Co2 Laser, Improve The Conversion Efficiency, And Extend The Life Of The Laser..
Features
- Basic Parameters Inccala 150W co2 laser power supply, rated voltage of 110V, maximum current of 35mA. The CO2 laser matching power supply is designed exclusively for engraving machine, and can be applicable to laser tube of most various manufacturers.
- High Performance Power Supply The power supply has the feature of high-efficiency and high-frequency, can make full use of the performance of the co2 laser, improve the conversion efficiency, and extend the life of the laser.
- LCD Display The external LCD display can timely show working current amperage, water protection system and laser out light status. This greatly facilitates the monitoring of the laser system during the engraving process.
- Convient Operation The start and stop of laser is can be easily controlled. The power supply comes with TTL signal indication,water through signal indication and laser output indication. It also can give your machine additional protection from variable mains power and any open-circuit faults. There is a 'TEST' button can speeds fault detection, help you slove system problems.
- Security Protection We inprove the safety performance of this laser power supply. With well-grounded enclosure,the input and output are separated completely which can avoid getting an electric shock. the power supply can work in open-circuit for a short time, avoid the damage of laser power supply.
- See more on Amazon...
Brand: Inccala | Manufacturer: Inccala
See On Amazon #7
Inccala CO2 Laser Power Supply for Laser Tube 150W 110V CO2 Laser Power Supply for Laser Cutter and Engraver Machine
Asin: B0BTSN5LQ4
【Perfect Adaptability】Each Connection Port Is Clearly Labeled The Power Supply Specification, It Can Help You Install Quickly And Easily. Replacement Parts For Co2 Laser Tube, Can Be Directly Connected To The Laser. It Has A Good Matching Performance With The Laser Tube, Perfectly Compatible With Your Laser Tube Models..
【Security Protection】We Inprove The Safety Performance Of This Laser Power Supply. With Well-Grounded Enclosure,The Input And Output Are Separated Completely Which Can Avoid Getting An Electric Shock. The Power Supply Can Work In Open-Circuit For A Short Time, Avoid The Damage Of Laser Power Supply..
【Convient Operation】The Start And Stop Of Laser Is Can Be Easily Controlled. The Power Supply Comes With Ttl Signal Indication,Water Through Signal Indication And Laser Output Indication. It Also Can Give Your Machine Additional Protection From Variable Mains Power And Any Open-Circuit Faults. There Is A 'Test' Button Can Speeds Fault Detection, Help You Slove System Problems..
【High Performance Power Supply】The Power Supply Has The Feature Of High-Efficiency And High-Frequency, Can Make Full Use Of The Performance Of The Co2 Laser, Improve The Conversion Efficiency, And Extend The Life Of The Laser..
Features
- Basic Parameters Inccala 150W co2 laser power supply, rated voltage of 110V, maximum current of 35mA. The CO2 laser matching power supply is designed exclusively for engraving machine, and can be applicable to laser tube of most various manufacturers.
- High Performance Power Supply The power supply has the feature of high-efficiency and high-frequency, can make full use of the performance of the co2 laser, improve the conversion efficiency, and extend the life of the laser.
- Perfect Adaptability Each connection port is clearly labeled the power supply specification, it can help you install quickly and easily. Replacement parts for CO2 laser tube, can be directly connected to the laser. It has a good matching performance with the laser tube, perfectly compatible with your laser tube models.
- Convient Operation The start and stop of laser is can be easily controlled. The power supply comes with TTL signal indication,water through signal indication and laser output indication. It also can give your machine additional protection from variable mains power and any open-circuit faults. There is a 'TEST' button can speeds fault detection, help you slove system problems.
- Security Protection We inprove the safety performance of this laser power supply. With well-grounded enclosure,the input and output are separated completely which can avoid getting an electric shock. the power supply can work in open-circuit for a short time, avoid the damage of laser power supply.
- See more on Amazon...
Brand: Inccala | Manufacturer: Inccala
See On Amazon #8
Inccala CO2 Laser Power Supply for Laser Tube 120W 110V CO2 Laser Power Supply for Laser Cutter and Engraver Machine
Asin: B0BTSL3KX6
【Perfect Adaptability】Each Connection Port Is Clearly Labeled The Power Supply Specification, It Can Help You Install Quickly And Easily. Replacement Parts For Co2 Laser Tube, Can Be Directly Connected To The Laser. It Has A Good Matching Performance With The Laser Tube, Perfectly Compatible With Your Laser Tube Models..
【Security Protection】We Inprove The Safety Performance Of This Laser Power Supply. With Well-Grounded Enclosure,The Input And Output Are Separated Completely Which Can Avoid Getting An Electric Shock. The Power Supply Can Work In Open-Circuit For A Short Time, Avoid The Damage Of Laser Power Supply..
【Convient Operation】The Start And Stop Of Laser Is Can Be Easily Controlled. The Power Supply Comes With Ttl Signal Indication,Water Through Signal Indication And Laser Output Indication. It Also Can Give Your Machine Additional Protection From Variable Mains Power And Any Open-Circuit Faults. There Is A 'Test' Button Can Speeds Fault Detection, Help You Slove System Problems..
【High Performance Power Supply】The Power Supply Has The Feature Of High-Efficiency And High-Frequency, Can Make Full Use Of The Performance Of The Co2 Laser, Improve The Conversion Efficiency, And Extend The Life Of The Laser..
Features
- Basic Parameters Inccala 120W co2 laser power supply, rated voltage of 110V, maximum current of 35mA. The CO2 laser matching power supply is designed exclusively for engraving machine, and can be applicable to laser tube of most various manufacturers.
- High Performance Power Supply The power supply has the feature of high-efficiency and high-frequency, can make full use of the performance of the co2 laser, improve the conversion efficiency, and extend the life of the laser.
- Perfect Adaptability Each connection port is clearly labeled the power supply specification, it can help you install quickly and easily. Replacement parts for CO2 laser tube, can be directly connected to the laser. It has a good matching performance with the laser tube, perfectly compatible with your laser tube models.
- Convient Operation The start and stop of laser is can be easily controlled. The power supply comes with TTL signal indication,water through signal indication and laser output indication. It also can give your machine additional protection from variable mains power and any open-circuit faults. There is a 'TEST' button can speeds fault detection, help you slove system problems.
- Security Protection We inprove the safety performance of this laser power supply. With well-grounded enclosure,the input and output are separated completely which can avoid getting an electric shock. the power supply can work in open-circuit for a short time, avoid the damage of laser power supply.
- See more on Amazon...
Brand: Inccala | Manufacturer: Inccala
See On Amazon #9
Inccala CO2 Laser Power Supply for Laser Tube 100W 110V CO2 Laser Power Supply with Display Screen for Laser Cutter and Engraver Machine
Asin: B0BTSPZJCC
【Lcd Display】The External Lcd Display Can Timely Show Working Current Amperage, Water Protection System And Laser Out Light Status. This Greatly Facilitates The Monitoring Of The Laser System During The Engraving Process..
【Security Protection】We Inprove The Safety Performance Of This Laser Power Supply. With Well-Grounded Enclosure,The Input And Output Are Separated Completely Which Can Avoid Getting An Electric Shock. The Power Supply Can Work In Open-Circuit For A Short Time, Avoid The Damage Of Laser Power Supply..
【Convient Operation】The Start And Stop Of Laser Is Can Be Easily Controlled. The Power Supply Comes With Ttl Signal Indication,Water Through Signal Indication And Laser Output Indication. It Also Can Give Your Machine Additional Protection From Variable Mains Power And Any Open-Circuit Faults. There Is A 'Test' Button Can Speeds Fault Detection, Help You Slove System Problems..
【High Performance Power Supply】The Power Supply Has The Feature Of High-Efficiency And High-Frequency, Can Make Full Use Of The Performance Of The Co2 Laser, Improve The Conversion Efficiency, And Extend The Life Of The Laser..
Features
- Basic Parameters Inccala 100W co2 laser power supply, rated voltage of 110V, maximum current of 30mA. The CO2 laser matching power supply is designed exclusively for engraving machine, and can be applicable to laser tube of most various manufacturers.
- High Performance Power Supply The power supply has the feature of high-efficiency and high-frequency, can make full use of the performance of the co2 laser, improve the conversion efficiency, and extend the life of the laser.
- LCD Display The external LCD display can timely show working current amperage, water protection system and laser out light status. This greatly facilitates the monitoring of the laser system during the engraving process.
- Convient Operation The start and stop of laser is can be easily controlled. The power supply comes with TTL signal indication,water through signal indication and laser output indication. It also can give your machine additional protection from variable mains power and any open-circuit faults. There is a 'TEST' button can speeds fault detection, help you slove system problems.
- Security Protection We inprove the safety performance of this laser power supply. With well-grounded enclosure,the input and output are separated completely which can avoid getting an electric shock. the power supply can work in open-circuit for a short time, avoid the damage of laser power supply.
- See more on Amazon...
Brand: Inccala | Manufacturer: Inccala
See On Amazon #10
Inccala CO2 Laser Power Supply for Laser Tube 80W 110V CO2 Laser Power Supply for Laser Cutter and Engraver Machine
Asin: B0BTSP5FZ7
【Perfect Adaptability】Each Connection Port Is Clearly Labeled The Power Supply Specification, It Can Help You Install Quickly And Easily. Replacement Parts For Co2 Laser Tube, Can Be Directly Connected To The Laser. It Has A Good Matching Performance With The Laser Tube, Perfectly Compatible With Your Laser Tube Models..
【Security Protection】We Inprove The Safety Performance Of This Laser Power Supply. With Well-Grounded Enclosure,The Input And Output Are Separated Completely Which Can Avoid Getting An Electric Shock. The Power Supply Can Work In Open-Circuit For A Short Time, Avoid The Damage Of Laser Power Supply..
【Convient Operation】The Start And Stop Of Laser Is Can Be Easily Controlled. The Power Supply Comes With Ttl Signal Indication,Water Through Signal Indication And Laser Output Indication. It Also Can Give Your Machine Additional Protection From Variable Mains Power And Any Open-Circuit Faults. There Is A 'Test' Button Can Speeds Fault Detection, Help You Slove System Problems..
【High Performance Power Supply】The Power Supply Has The Feature Of High-Efficiency And High-Frequency, Can Make Full Use Of The Performance Of The Co2 Laser, Improve The Conversion Efficiency, And Extend The Life Of The Laser..
Features
- Basic Parameters Inccala 80W co2 laser power supply, rated voltage of 110V, maximum current of 28mA. The CO2 laser matching power supply is designed exclusively for engraving machine, and can be applicable to laser tube of most various manufacturers.
- High Performance Power Supply The power supply has the feature of high-efficiency and high-frequency, can make full use of the performance of the co2 laser, improve the conversion efficiency, and extend the life of the laser.
- Perfect Adaptability Each connection port is clearly labeled the power supply specification, it can help you install quickly and easily. Replacement parts for CO2 laser tube, can be directly connected to the laser. It has a good matching performance with the laser tube, perfectly compatible with your laser tube models.
- Convient Operation The start and stop of laser is can be easily controlled. The power supply comes with TTL signal indication,water through signal indication and laser output indication. It also can give your machine additional protection from variable mains power and any open-circuit faults. There is a 'TEST' button can speeds fault detection, help you slove system problems.
- Security Protection We inprove the safety performance of this laser power supply. With well-grounded enclosure,the input and output are separated completely which can avoid getting an electric shock. the power supply can work in open-circuit for a short time, avoid the damage of laser power supply.
- See more on Amazon...
Brand: Inccala | Manufacturer: Inccala
See On Amazon #11
PRESIONQI CO2 Laser 60W Power Supply for 40-80W Laser Tube 220V CO2 Laser Power Supply for Laser Engraving Cutting Machine
Asin: B0CC1JCTJ9
Quick Response Speed And Effect, High Performance,Large Cutting Power, It Also Can Prolong Laser Tube Service Life. It Comes With A Small Fan, Which Can Quickly Cool Down During Use. Laser Power Supply Can Be Widely Used In The Laser Engraving Industry, Stable Cutting Power, Adaptable, Fast Engraving Response, Good Engraving Effect Significantly Extends The Life Of The Laser.
Safe In Use:Presionqi Power Supply For Engraver Has An Open Circuit Protection Function, In The Case Of Good Protection Grounding, It Can Work In The Open Circuit State For A Short Time, Which Can Avoid Damage To The Laser Power Supply Caused By Laser Tube Burst, Thus Improving The Life Of The Power Supply..
The Laser Power Supply For Co2 Laser Engraver Has A Fast Response Time And Good Engraving And Cutting Effect. With Simple Control, You Can Choose High Or Low Level Control, Both Can Input 0-5V Analog Signal To Control The Size Of The Laser Power, But Also Available Pwm Signal Control..
Easy Control: The Start And Stop Of Laser Can Be Easily Controlled By Ttl Level. Laser Power Supply Comes With A Manual Test Switch, Which Can Be Used To Quickly Determine Whether The Laser Power Supply Is Normal And Facilitate On-Site Maintenance. The Laser Power Supply Can Come With A Feedback Interface, Which Can Be Used For Closed Loop Control And Also For Checking The Actual Working Current Of The Laser Tube..
Features
- Perfect Compatibility:PRESIONQI CO2 Laser Power Supply can be applicable to 60w Laser Tube, rated voltage of 110V, 47-440H
- Easy control: the start and stop of laser can be easily controlled by TTL level. Laser power supply comes with a manual test switch, which can be used to quickly determine whether the laser power supply is normal and facilitate on-site maintenance. The laser power supply can come with a feedback interface, which can be used for closed loop control and also for checking the actual working current of the laser tube.
- Quick response speed and effect, high performance,large cutting power, it also can prolong laser tube service life. It comes with a small fan, which can quickly cool down during use. laser power supply can be widely used in the laser engraving industry, Stable cutting power, adaptable, fast engraving response, good engraving effect significantly extends the life of the laser
- The laser power supply for co2 laser engraver has a fast response time and good engraving and cutting effect. With simple control, you can choose high or low level control, both can input 0-5V analog signal to control the size of the laser power, but also available PWM signal control.
- SAFE IN USE:PRESIONQI power supply for engraver has an open circuit protection function, in the case of good protection grounding, it can work in the open circuit state for a short time, which can avoid damage to the laser power supply caused by laser tube burst, thus improving the life of the power supply.
- See more on Amazon...
Brand: PRESIONQI | Manufacturer: PRESIONQI
See On Amazon #12
Inccala CO2 Laser Power Supply for Laser Tube 50W 110V CO2 Laser Power Supply for Laser Cutter and Engraver Machine
Asin: B0BTSPMY5G
【Perfect Adaptability】Each Connection Port Is Clearly Labeled The Power Supply Specification, It Can Help You Install Quickly And Easily. Replacement Parts For Co2 Laser Tube, Can Be Directly Connected To The Laser. It Has A Good Matching Performance With The Laser Tube, Perfectly Compatible With Your Laser Tube Models..
【Security Protection】We Inprove The Safety Performance Of This Laser Power Supply. With Well-Grounded Enclosure,The Input And Output Are Separated Completely Which Can Avoid Getting An Electric Shock. The Power Supply Can Work In Open-Circuit For A Short Time, Avoid The Damage Of Laser Power Supply..
【Convient Operation】The Start And Stop Of Laser Is Can Be Easily Controlled. The Power Supply Comes With Ttl Signal Indication,Water Through Signal Indication And Laser Output Indication. It Also Can Give Your Machine Additional Protection From Variable Mains Power And Any Open-Circuit Faults. There Is A 'Test' Button Can Speeds Fault Detection, Help You Slove System Problems..
【High Performance Power Supply】The Power Supply Has The Feature Of High-Efficiency And High-Frequency, Can Make Full Use Of The Performance Of The Co2 Laser, Improve The Conversion Efficiency, And Extend The Life Of The Laser..
Features
- Basic Parameters Inccala 50W co2 laser power supply, rated voltage of 110V, maximum current of 20mA. The CO2 laser matching power supply is designed exclusively for engraving machine, and can be applicable to laser tube of most various manufacturers.
- High Performance Power Supply The power supply has the feature of high-efficiency and high-frequency, can make full use of the performance of the co2 laser, improve the conversion efficiency, and extend the life of the laser.
- Perfect Adaptability Each connection port is clearly labeled the power supply specification, it can help you install quickly and easily. Replacement parts for CO2 laser tube, can be directly connected to the laser. It has a good matching performance with the laser tube, perfectly compatible with your laser tube models.
- Convient Operation The start and stop of laser is can be easily controlled. The power supply comes with TTL signal indication,water through signal indication and laser output indication. It also can give your machine additional protection from variable mains power and any open-circuit faults. There is a 'TEST' button can speeds fault detection, help you slove system problems.
- Security Protection We inprove the safety performance of this laser power supply. With well-grounded enclosure,the input and output are separated completely which can avoid getting an electric shock. the power supply can work in open-circuit for a short time, avoid the damage of laser power supply.
- See more on Amazon...
Brand: Inccala | Manufacturer: Inccala
See On Amazon #13
Inccala CO2 Laser Power Supply for Laser Tube 60W 110V CO2 Laser Power Supply for Laser Cutter and Engraver Machine
Asin: B0BTSRRCJV
【Perfect Adaptability】Each Connection Port Is Clearly Labeled The Power Supply Specification, It Can Help You Install Quickly And Easily. Replacement Parts For Co2 Laser Tube, Can Be Directly Connected To The Laser. It Has A Good Matching Performance With The Laser Tube, Perfectly Compatible With Your Laser Tube Models..
【Security Protection】We Inprove The Safety Performance Of This Laser Power Supply. With Well-Grounded Enclosure,The Input And Output Are Separated Completely Which Can Avoid Getting An Electric Shock. The Power Supply Can Work In Open-Circuit For A Short Time, Avoid The Damage Of Laser Power Supply..
【Convient Operation】The Start And Stop Of Laser Is Can Be Easily Controlled. The Power Supply Comes With Ttl Signal Indication,Water Through Signal Indication And Laser Output Indication. It Also Can Give Your Machine Additional Protection From Variable Mains Power And Any Open-Circuit Faults. There Is A 'Test' Button Can Speeds Fault Detection, Help You Slove System Problems..
【High Performance Power Supply】The Power Supply Has The Feature Of High-Efficiency And High-Frequency, Can Make Full Use Of The Performance Of The Co2 Laser, Improve The Conversion Efficiency, And Extend The Life Of The Laser..
Features
- Basic Parameters Inccala 60W co2 laser power supply, rated voltage of 110V, maximum current of 22mA. The CO2 laser matching power supply is designed exclusively for engraving machine, and can be applicable to laser tube of most various manufacturers.
- High Performance Power Supply The power supply has the feature of high-efficiency and high-frequency, can make full use of the performance of the co2 laser, improve the conversion efficiency, and extend the life of the laser.
- Perfect Adaptability Each connection port is clearly labeled the power supply specification, it can help you install quickly and easily. Replacement parts for CO2 laser tube, can be directly connected to the laser. It has a good matching performance with the laser tube, perfectly compatible with your laser tube models.
- Convient Operation The start and stop of laser is can be easily controlled. The power supply comes with TTL signal indication,water through signal indication and laser output indication. It also can give your machine additional protection from variable mains power and any open-circuit faults. There is a 'TEST' button can speeds fault detection, help you slove system problems.
- Security Protection We inprove the safety performance of this laser power supply. With well-grounded enclosure,the input and output are separated completely which can avoid getting an electric shock. the power supply can work in open-circuit for a short time, avoid the damage of laser power supply.
- See more on Amazon...
Brand: Inccala | Manufacturer: Inccala
See On Amazon #14
Cloudray 3 Meters High Voltage Cable for CO2 Laser Power Supply and CO2 Laser Tube
Asin: B07BLP63B8 | Ean: 0669819731170 | UPC: 669819731170
Brand: Cloudray | Manufacturer: Cloudray
Weight: 0.18 Pounds
See On Amazon
Looking For Something Else?
Search