uxcell 6mm Shank Keyhole Router Bit 7/16" Diameter with 1/2" to 6mm Router Collet Adapter, Carbide Tipped Wood Milling T-Slot Cutter
Asin: B09JGF4J29 | Model: a21051600ux0026 | PartNumber: a21051600ux0026
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Features: Carbide Tip With Sharp Cutting Edge, High Hardness, Wear Resistance And Long Life. Solid Hardened Steel Body With Anti-Kickback Design. The Arc Curve Design For Easy Chip Removal And Efficient Perforation..
Notices: Cannot Be Used To Cut Ferrous Metal And Non Wood Materials. Suggested Feeding Speed: 2-5M/Min; Suggested Spindle Speed: 22000-24000Rpm. Be Sure To Use Router Bits And Accessories Designed For Your Router..
Easy To Use: Use On Cnc, Woodworking Engraving Machine, Trimming Machine, Hand-Held And Table-Mounted Portable Routers. Just Slide The Bit Shank Into Your Collet Adapter And Tighten..
Applications: Widely Used For Softwoods, Hardwoods, Chipboard, Plywood, Acrylic, Particle Board And Mdf Etc. Creates T Slots For Picture Frames, Shelves, Mirrors, Cabinets, Support Fixtures And Other Wall Hangings..
Features
- Router Bit Set: 6mm shank keyhole router bit cuts T slots, and is suitable for bolts with 7/16" wide x 3/16" high head and 1/4" shaft diameter. Router collet driver adapter converts 1/2" to 6mm. Great bit tools for woodworking carpenter.
- Applications: Widely used for softwoods, hardwoods, chipboard, plywood, acrylic, particle board and MDF etc. Creates t slots for picture frames, shelves, mirrors, cabinets, support fixtures and other wall hangings.
- Features: Carbide tip with sharp cutting edge, high hardness, wear resistance and long life. Solid hardened steel body with anti-kickback design. The arc curve design for easy chip removal and efficient perforation.
- Easy to Use: Use on CNC, woodworking engraving machine, trimming machine, hand-held and table-mounted portable routers. Just slide the bit shank into your collet adapter and tighten.
- Notices: Cannot be used to cut ferrous metal and non wood materials. suggested feeding speed: 2-5m/min; suggested spindle speed: 22000-24000rpm. Be sure to use router bits and accessories designed for your router.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon Similar To uxcell 6mm Shank Keyhole Router
#1
uxcell 90 Degree V-Groove Router Bit 32mm Dia with 6mm Shank, Titanium Steel Tipped V Grooving Bit (Gray)
Asin: B07MV3ZH23 | Model: a18121200ux0561 | PartNumber: a18121200ux0561
Features: Titanium Steel Tip, Nice Cuts And Long Life. Hardened Steel Body With Anti-Kickback Design.
Warm Tips: Cannot Be Used To Cut Ferrous Metal And Non Wood Materials. Suggested Feeding Speed: 8-12M/Min; Suggested Spindle Speed: 18000-24000Rpm.
How To Use: Use On Edge Trimmer, Handheld, Table-Mounted, Cnc And Other Automatic Routers. All Bits Must Be Inserted In The Collet In Full Length.
Applications: Cuts All Composition Materials, Plywood, Hardwoods, And Softwoods, Chipboard, And Mdf Etc. Designed To Cut Deep Or Shallow V Grooves.
Features
- SPECIFICATIONS: 90 degree tip; 32mm cutting dia.; 6mm shank; 51mm overall length. Titanium steel v-groove router bit
- APPLICATIONS: Cuts all composition materials, plywood, hardwoods, and softwoods, chipboard, and MDF etc. Designed to cut deep or shallow V grooves
- FEATURES: Titanium steel tip, nice cuts and long life. Hardened steel body with anti-kickback design
- HOW TO USE: Use on edge trimmer, handheld, table-mounted, CNC and other automatic routers. All bits must be inserted in the collet in full length
- WARM TIPS: Cannot be used to cut ferrous metal and non wood materials. suggested feeding speed: 8-12M/Min; suggested spindle speed: 18000-24000RPM
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 2.95 x 1.18 inches
See On Amazon #2
uxcell 120 Degree V-Groove Router Bit 32mm Dia with 6mm Shank, Titanium Steel Tipped V Grooving Bit (Gray)
Asin: B07MV4BR66 | Model: a18121200ux0562 | PartNumber: a18121200ux0562
Features: Titanium Steel Tip, Nice Cuts And Long Life. Hardened Steel Body With Anti-Kickback Design.
Warm Tips: Cannot Be Used To Cut Ferrous Metal And Non Wood Materials. Suggested Feeding Speed: 8-12M/Min; Suggested Spindle Speed: 18000-24000Rpm.
How To Use: Use On Edge Trimmer, Handheld, Table-Mounted, Cnc And Other Automatic Routers. All Bits Must Be Inserted In The Collet In Full Length.
Applications: Cuts All Composition Materials, Plywood, Hardwoods, And Softwoods, Chipboard, And Mdf Etc. Designed To Cut Deep Or Shallow V Grooves.
Features
- SPECIFICATIONS: 120 degree tip; 32mm cutting dia.; 6mm shank; 45mm overall length. Titanium steel v-groove router bit
- APPLICATIONS: Cuts all composition materials, plywood, hardwoods, and softwoods, chipboard, and MDF etc. Designed to cut deep or shallow V grooves
- FEATURES: Titanium steel tip, nice cuts and long life. Hardened steel body with anti-kickback design
- HOW TO USE: Use on edge trimmer, handheld, table-mounted, CNC and other automatic routers. All bits must be inserted in the collet in full length
- WARM TIPS: Cannot be used to cut ferrous metal and non wood materials. suggested feeding speed: 8-12M/Min; suggested spindle speed: 18000-24000RPM
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 2.95 x 1.18 inches
See On Amazon #3
uxcell 150 Degree V-Groove Router Bit 32mm Dia with 6mm Shank, Titanium Steel Tipped V Grooving Bit (Gray)
Asin: B07MV3J6HL | Model: a18121200ux0563 | PartNumber: a18121200ux0563
Features: Titanium Steel Tip, Nice Cuts And Long Life. Hardened Steel Body With Anti-Kickback Design.
Warm Tips: Cannot Be Used To Cut Ferrous Metal And Non Wood Materials. Suggested Feeding Speed: 8-12M/Min; Suggested Spindle Speed: 18000-24000Rpm.
How To Use: Use On Edge Trimmer, Handheld, Table-Mounted, Cnc And Other Automatic Routers. All Bits Must Be Inserted In The Collet In Full Length.
Applications: Cuts All Composition Materials, Plywood, Hardwoods, And Softwoods, Chipboard, And Mdf Etc. Designed To Cut Deep Or Shallow V Grooves.
Features
- SPECIFICATIONS: 150 degree tip; 32mm cutting dia.; 6mm shank; 41mm overall length. Titanium steel v-groove router bit
- APPLICATIONS: Cuts all composition materials, plywood, hardwoods, and softwoods, chipboard, and MDF etc. Designed to cut deep or shallow V grooves
- FEATURES: Titanium steel tip, nice cuts and long life. Hardened steel body with anti-kickback design
- HOW TO USE: Use on edge trimmer, handheld, table-mounted, CNC and other automatic routers. All bits must be inserted in the collet in full length
- WARM TIPS: Cannot be used to cut ferrous metal and non wood materials. suggested feeding speed: 8-12M/Min; suggested spindle speed: 18000-24000RPM
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 2.95 x 1.18 inches
See On Amazon #4
uxcell Router Bits 6mm Shank 32mm Dia. 120 Degree & 150 Degree V-Groove End Mill Tungsten Steel for CNC Woodworking Engraving Edge Trimmer
Asin: B0BG44B6RZ | Model: f22042800ux1038 | PartNumber: f22042800ux1038
[Features] Titanium Steel Tip, Nice Cuts And Long Life. Hardened Steel Body With Anti-Kickback Design..
[Warm Tips] Cannot Be Used To Cut Ferrous Metal And Non Wood Materials. Suggested Feeding Speed: 8-12M/Min; Suggested Spindle Speed: 18000-24000Rpm..
[How To Use] Use On Edge Trimmer, Handheld, Table-Mounted, Cnc And Other Automatic Routers. All Bits Must Be Inserted In The Collet In Full Length..
[Applications] Cuts All Composition Materials, Plywood, Hardwoods, And Softwoods, Chipboard, And Mdf, Etc. Designed To Cut Deep Or Shallow V Grooves..
Features
- [Package Contents] This tool set contains 1 pcs 120-degree tip v groove router bit and 1 pcs 150-degree tip v groove router bit.
- [Applications] Cuts all composition materials, plywood, hardwoods, and softwoods, chipboard, and MDF, etc. Designed to cut deep or shallow V grooves.
- [Features] Titanium steel tip, nice cuts and long life. Hardened steel body with anti-kickback design.
- [How To Use] Use on edge trimmer, handheld, table-mounted, CNC and other automatic routers. All bits must be inserted in the collet in full length.
- [Warm Tips] Cannot be used to cut ferrous metal and non wood materials. suggested feeding speed: 8-12M/Min; suggested spindle speed: 18000-24000RPM.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #5
uxcell 1/4" Shank Keyhole Router Bit 5/8" Diameter with 1/2" to 1/4" Router Collet Adapter, Carbide Tipped Wood Milling T-Slot Cutter
Asin: B09JGFZD6C | Model: a21051600ux0025 | PartNumber: a21051600ux0025
Features: Carbide Tip With Sharp Cutting Edge, High Hardness, Wear Resistance And Long Life. Solid Hardened Steel Body With Anti-Kickback Design. The Arc Curve Design For Easy Chip Removal And Efficient Perforation..
Notices: Cannot Be Used To Cut Ferrous Metal And Non Wood Materials. Suggested Feeding Speed: 2-5M/Min; Suggested Spindle Speed: 22000-24000Rpm. Be Sure To Use Router Bits And Accessories Designed For Your Router..
Easy To Use: Use On Cnc, Woodworking Engraving Machine, Trimming Machine, Hand-Held And Table-Mounted Portable Routers. Just Slide The Bit Shank Into Your Collet Adapter And Tighten..
Applications: Widely Used For Softwoods, Hardwoods, Chipboard, Plywood, Acrylic, Particle Board And Mdf Etc. Creates T Slots For Picture Frames, Shelves, Mirrors, Cabinets, Support Fixtures And Other Wall Hangings..
Features
- Router Bit Set: 1/4" shank keyhole router bit cuts T slots, and is suitable for bolts with 5/8" wide x 3/16" high head and 3/8" shaft diameter. Router collet driver adapter converts 1/2" to 1/4". Great bit tools for woodworking carpenter.
- Applications: Widely used for softwoods, hardwoods, chipboard, plywood, acrylic, particle board and MDF etc. Creates t slots for picture frames, shelves, mirrors, cabinets, support fixtures and other wall hangings.
- Features: Carbide tip with sharp cutting edge, high hardness, wear resistance and long life. Solid hardened steel body with anti-kickback design. The arc curve design for easy chip removal and efficient perforation.
- Easy to Use: Use on CNC, woodworking engraving machine, trimming machine, hand-held and table-mounted portable routers. Just slide the bit shank into your collet adapter and tighten.
- Notices: Cannot be used to cut ferrous metal and non wood materials. suggested feeding speed: 2-5m/min; suggested spindle speed: 22000-24000rpm. Be sure to use router bits and accessories designed for your router.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #6
uxcell 1/4" Shank Keyhole Router Bit Set 5/16" 3/8" 1/2" Diameter with 1/2" to 1/4" Router Collet Adapter, Carbide Tipped Wood Milling T-Slot Cutter
Asin: B09JGFGF9P | Model: a21051600ux0022 | PartNumber: a21051600ux0022
Features: Carbide Tip With Sharp Cutting Edge, High Hardness, Wear Resistance And Long Life. Solid Hardened Steel Body With Anti-Kickback Design. The Arc Curve Design For Easy Chip Removal And Efficient Perforation..
Notices: Cannot Be Used To Cut Ferrous Metal And Non Wood Materials. Suggested Feeding Speed: 2-5M/Min; Suggested Spindle Speed: 22000-24000Rpm. Be Sure To Use Router Bits And Accessories Designed For Your Router..
Easy To Use: Use On Cnc, Woodworking Engraving Machine, Trimming Machine, Hand-Held And Table-Mounted Portable Routers. Just Slide The Bit Shank Into Your Collet Adapter And Tighten..
Applications: Widely Used For Softwoods, Hardwoods, Chipboard, Plywood, Acrylic, Particle Board And Mdf Etc. Creates T Slots For Picture Frames, Shelves, Mirrors, Cabinets, Support Fixtures And Other Wall Hangings..
Features
- Router Bit Set: 1/4" shank keyhole router bit cuts T slots, and is suitable for bolts with 5/16" wide x 3/16" high head, 3/8" wide x 3/16" high head, 1/2" wide x 1/4" high head. Router collet driver adapter converts 1/2" to 1/4". Great bit tools for woodworking carpenter.
- Applications: Widely used for softwoods, hardwoods, chipboard, plywood, acrylic, particle board and MDF etc. Creates t slots for picture frames, shelves, mirrors, cabinets, support fixtures and other wall hangings.
- Features: Carbide tip with sharp cutting edge, high hardness, wear resistance and long life. Solid hardened steel body with anti-kickback design. The arc curve design for easy chip removal and efficient perforation.
- Easy to Use: Use on CNC, woodworking engraving machine, trimming machine, hand-held and table-mounted portable routers. Just slide the bit shank into your collet adapter and tighten.
- Notices: Cannot be used to cut ferrous metal and non wood materials. suggested feeding speed: 2-5m/min; suggested spindle speed: 22000-24000rpm. Be sure to use router bits and accessories designed for your router.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #7
uxcell 2pcs 6mm Shank 5mm x 13mm Straight Flat Nose End Mill Cutter CNC Router Bits 2 Flute
Asin: B07MKFLWCH
Suitable For Side Milling, End Milling, Finish Machining, Etc.
Material: Hss-Al, Sharp And Durable, Bending Resistance And Abrasion Resistance.
Apply To Carbon Steel, Soft Alloy Steel, Die Steel, Tool Steel, Cast Iron, Titanium, Aluminum, Etc.
Cutting Length: 13Mm / 0.51"; Overall Length: 57Mm / 2.24".
Features
- Shank Diameter: 6mm / 0.24"; Cutting Diameter: 5mm / 0.17"; Number of Flutes: 2
- Cutting Length: 13mm / 0.51; Overall Length: 57mm / 2.24
- Suitable for side milling, end milling, finish machining, etc
- Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc
- Material: HSS-AL, sharp and durable, bending resistance and abrasion resistance
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 2.76 x 1.18 inches
See On Amazon #8
uxcell 6mm Shank 5mm x 13mm Straight Flat Nose End Mill Cutter CNC Router Bits 4 Flute
Asin: B07MKFJTKB | Model: a18112900ux0519 | PartNumber: a18112900ux0519
Designed With 4 Flutes, Straight Shank, Deep Helical Groove.
Material: Hss-Al, Sharp And Durable, Bending Resistance And Abrasion Resistance.
Apply To Carbon Steel, Soft Alloy Steel, Die Steel, Tool Steel, Cast Iron, Titanium, Aluminum, Etc.
Cutting Length: 13Mm / 0.51"; Overall Length: 57Mm / 2.24".
Features
- Shank Diameter: 6mm / 0.24"; Cutting Diameter: 5mm / 0.2"
- Cutting Length: 13mm / 0.51; Overall Length: 57mm / 2.24
- Designed with 4 flutes, straight shank, deep helical groove
- Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc
- Material: HSS-AL, sharp and durable, bending resistance and abrasion resistance
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.39 x 3.15 x 1.57 Inches
See On Amazon #9
uxcell 60 Degree V-Groove Router Bit 32mm Dia with 6mm Shank, Titanium Steel Tipped V Grooving Bit (Gray)
Asin: B07MV42YP5 | Model: a18121200ux0560 | PartNumber: a18121200ux0560
Features: Titanium Steel Tip, Nice Cuts And Long Life. Hardened Steel Body With Anti-Kickback Design.
Warm Tips: Cannot Be Used To Cut Ferrous Metal And Non Wood Materials. Suggested Feeding Speed: 8-12M/Min; Suggested Spindle Speed: 18000-24000Rpm.
How To Use: Use On Edge Trimmer, Handheld, Table-Mounted, Cnc And Other Automatic Routers. All Bits Must Be Inserted In The Collet In Full Length.
Applications: Cuts All Composition Materials, Plywood, Hardwoods, And Softwoods, Chipboard, And Mdf Etc. Designed To Cut Deep Or Shallow V Grooves.
Features
- SPECIFICATIONS: 60 degree tip; 32mm cutting dia.; 6mm shank; 63mm overall length. Titanium steel v-groove router bit
- APPLICATIONS: Cuts all composition materials, plywood, hardwoods, and softwoods, chipboard, and MDF etc. Designed to cut deep or shallow V grooves
- FEATURES: Titanium steel tip, nice cuts and long life. Hardened steel body with anti-kickback design
- HOW TO USE: Use on edge trimmer, handheld, table-mounted, CNC and other automatic routers. All bits must be inserted in the collet in full length
- WARM TIPS: Cannot be used to cut ferrous metal and non wood materials. suggested feeding speed: 8-12M/Min; suggested spindle speed: 18000-24000RPM
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.18 x 2.95 x 1.18 inches
See On Amazon #10
uxcell Router Bits 6mm Shank 16mm Dia. 60 Degree & 90 Degree V-Groove End Mill Tungsten Steel for CNC Woodworking Engraving Edge Trimmer
Asin: B0BGT3YN3R | Model: f22042800ux1037 | PartNumber: f22042800ux1037
[Features] Titanium Steel Tip, Nice Cuts And Long Life. Hardened Steel Body With Anti-Kickback Design..
[Warm Tips] Cannot Be Used To Cut Ferrous Metal And Non Wood Materials. Suggested Feeding Speed: 8-12M/Min; Suggested Spindle Speed: 18000-24000Rpm..
[How To Use] Use On Edge Trimmer, Handheld, Table-Mounted, Cnc And Other Automatic Routers. All Bits Must Be Inserted In The Collet In Full Length..
[Applications] Cuts All Composition Materials, Plywood, Hardwoods, And Softwoods, Chipboard, And Mdf, Etc. Designed To Cut Deep Or Shallow V Grooves..
Features
- [Package Contents] This tool set contains 1 pcs 60-degree tip v groove router bit and 1 pcs 90-degree tip v groove router bit.
- [Applications] Cuts all composition materials, plywood, hardwoods, and softwoods, chipboard, and MDF, etc. Designed to cut deep or shallow V grooves.
- [Features] Titanium steel tip, nice cuts and long life. Hardened steel body with anti-kickback design.
- [How To Use] Use on edge trimmer, handheld, table-mounted, CNC and other automatic routers. All bits must be inserted in the collet in full length.
- [Warm Tips] Cannot be used to cut ferrous metal and non wood materials. suggested feeding speed: 8-12M/Min; suggested spindle speed: 18000-24000RPM.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #11
uxcell Wood Engraving Bit Solid Carbide 6mm Shank, 30 Degree 0.5mm Tip CNC Router Tool for Acrylic PVC MDF PCB Wood Carving
Asin: B09BM48DHC | Model: a21042000ux0342 | PartNumber: a21042000ux0342
Carbide Materials: Made Of Solid Carbide (Tungsten Steel), High Hardness, Wear Resistance, Good Toughness And Heat Resistance. Provide Good Cutting Strength And Drilling Effect. Fast Engrave And Cut To Improve Efficiency..
Notices: Need To Increase The Speed And Reduce The Feed Rate To Avoid Tool Breakage, When Engraving Harder Materials..
Application Materials: Pcb, Mdf, Abs, Pvc, Wood, Plywood, Hardwood, Color Plates, Acrylic, Nylon, Plastic, Hardwood, Mdf, Copper, Aluminum Etc...
Versatile Tool: Can Be Used For Carving, Cutting, Engraving, Milling, Slotting, Grinding, Finishing, 2D Or 3D Sculpturing, Surface Machining, Etc. The Deep Angle And Sharp Point Allows For Precise Details..
Features
- Carving and Engraving Bit: Shank diameter: 6mm / 0.24"; cutting angle: 30 degree; tip size: 0.5mm / 0.02"; total length: 45mm / 1.77". Sharp edge provides smooth cutting, no glitches. Fits most small rotary tools and grinders.
- Versatile Tool: Can be used for carving, cutting, engraving, milling, slotting, grinding, finishing, 2D or 3D sculpturing, surface machining, etc. The deep angle and sharp point allows for precise details.
- Carbide Materials: Made of solid carbide (tungsten steel), high hardness, wear resistance, good toughness and heat resistance. Provide good cutting strength and drilling effect. Fast engrave and cut to improve efficiency.
- Application Materials: PCB, MDF, ABS, PVC, wood, plywood, hardwood, color plates, acrylic, nylon, plastic, hardwood, MDF, copper, aluminum etc..
- Notices: Need to increase the speed and reduce the feed rate to avoid tool breakage, when engraving harder materials.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #12
uxcell 1/4" x 1" Woodworking Grooving Double 2 Flutes Cutter Cove Box Bit
Asin: B00VGEBDZ0 | Model: a15012000ux0527 | PartNumber: a15012000ux0527
Cutting Radius : 12.7Mm / 1/2";Cutting Depth : 16Mm / 5/8".
Double Fluted Design For Sharp And Long Lasting Cutting.
Used For Routing, Inlaying, Mortising In Wood And Other Soft Materials.
Use On Hand-Held And Table-Mounted Portable Routers (Routers Are Not Included Here).
Cove Box Bit Is Designed For , Fluting And General Ornamentation.
Add A Personal Touch To Cabinet Doors, Drawer Fronts, And Fluted Millwork, Or Use These Bits To Engrave Wood Signs.
.
Overall Length : 47Mm / 1.9"; Color: Blue, Silver Tone.
Shank Diameter : 6Mm / 1/4";Cutting Diameter: 25.4Mm / 1".
Features
- Total Weight : 71g;Package Content : 1 x Cove Box Bit,1 x Plastic Case
- Shank Diameter : 6mm / 1/4;Cutting Diameter: 25.4mm / 1
- Cutting Radius : 12.7mm / 1/2;Cutting Depth : 16mm / 5/8
- Overall Length : 47mm / 1.9; Color: Blue, Silver Tone
- Double fluted design for sharp and long lasting cutting.
Used for routing, inlaying, mortising in wood and other soft materials.
Use on hand-held and table-mounted portable routers (Routers are not included here).
Cove box bit is designed for , fluting and general ornamentation.
Add a personal touch to cabinet doors, drawer fronts, and fluted millwork, or use these bits to engrave wood signs.
- See more on Amazon...
First Available: 08/20/2018
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.57 x 3.94 x 1.57 inches | Weight: 0.00 pounds
See On Amazon #13
uxcell 7/16" 5/8" Diameter Keyhole Router Bit Set 1/4" Shank with 1/2" to 1/4" Router Collet Adapter, Carbide Tipped Wood Milling T-Slot Cutter
Asin: B09JGGB7LZ | Model: a21051600ux0028 | PartNumber: a21051600ux0028
Features: Carbide Tip With Sharp Cutting Edge, High Hardness, Wear Resistance And Long Life. Solid Hardened Steel Body With Anti-Kickback Design. The Arc Curve Design For Easy Chip Removal And Efficient Perforation..
Notices: Cannot Be Used To Cut Ferrous Metal And Non Wood Materials. Suggested Feeding Speed: 2-5M/Min; Suggested Spindle Speed: 22000-24000Rpm. Be Sure To Use Router Bits And Accessories Designed For Your Router..
Easy To Use: Use On Cnc, Woodworking Engraving Machine, Trimming Machine, Hand-Held And Table-Mounted Portable Routers. Just Slide The Bit Shank Into Your Collet Adapter And Tighten..
Applications: Widely Used For Softwoods, Hardwoods, Chipboard, Plywood, Acrylic, Particle Board And Mdf Etc. Creates T Slots For Picture Frames, Shelves, Mirrors, Cabinets, Support Fixtures And Other Wall Hangings..
Features
- Router Bit Set: 1/4" shank keyhole router bit cuts T slots, and is suitable for bolts with 7/16" wide x 3/16" high head and 1/4" shaft diameter, 5/8" wide x 3/16" high head and 3/8" shaft diameter. Router collet driver adapter converts 1/2" to 1/4". Great bit tools for woodworking carpenter.
- Applications: Widely used for softwoods, hardwoods, chipboard, plywood, acrylic, particle board and MDF etc. Creates t slots for picture frames, shelves, mirrors, cabinets, support fixtures and other wall hangings.
- Features: Carbide tip with sharp cutting edge, high hardness, wear resistance and long life. Solid hardened steel body with anti-kickback design. The arc curve design for easy chip removal and efficient perforation.
- Easy to Use: Use on CNC, woodworking engraving machine, trimming machine, hand-held and table-mounted portable routers. Just slide the bit shank into your collet adapter and tighten.
- Notices: Cannot be used to cut ferrous metal and non wood materials. suggested feeding speed: 2-5m/min; suggested spindle speed: 22000-24000rpm. Be sure to use router bits and accessories designed for your router.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #14
uxcell 1/4-Inch Shank 1/2-Inch Cutting Dia Carbide Keyhole Slot Router Bits with 3/8-Inch Cutting Length
Asin: B01MTB3G9L | Model: a16111000ux0422 | PartNumber: a16111000ux0422 | Ean: 0604267110542 | UPC: 604267110542
Brand: sourcing map | Manufacturer: uxcell
Dimensions: 0.39 x 5.51 x 3.94 inches
See On Amazon #15
uxcell End Mill CNC Router Bit, 1/8" 3.175mm Shank 2mm x 6mm Left Hand Carbide Single Flute Spiral Upcut Milling Cutter for Carving Acrylic PVC MDF Hardwood, 2pcs
Asin: B09QLTSXBM
Spiral And Sharp Flute: Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting And No Glitches. Provide Good Cutting Strength And Milling Effect To Ensure High Work Efficiency..
Tips: Adopts Spray And Air Jet Cooling To Improve The Use Effect Of The Milling Cutter. The Longer The Length Of The Tool Clamped By The Chuck, The Better. If The Clamping Length Is Shorter, You Need To Slow Down The Speed And Reduce The Feed Speed Or Cutting Amount..
Carbide Tool: Carbide (Tungsten Steel) End Mill Is Wear Resistance, Good Toughness, Heat Resistance, Higher Hardness But Is More Brittle. Carbide Can Run At Higher Speed Than High-Speed Steel..
Wide Applications: Suitable For Engraving, Cutting, Carving, Milling, Slotting In Mdf, Abs, Pvc, Acrylic, Nylon, Plastic, Wood, Plywood, Hardwood Etc. Good For Surface Machining, 2D Or 3D Sculpturing..
Features
- End Mill Router Bit: Shank diameter: 3.175mm / 1/8"; cutting diameter: 2mm / 0.08"; cutting edge length: 6mm / 0.24"; overall length: 38mm / 1.5". Used on engraving machine, CNC machines, and machining center.
- Wide Applications: Suitable for engraving, cutting, carving, milling, slotting in MDF, ABS, PVC, acrylic, nylon, plastic, wood, plywood, hardwood etc. Good for surface machining, 2D or 3D sculpturing.
- Spiral and Sharp Flute: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. Provide good cutting strength and milling effect to ensure high work efficiency.
- Carbide Tool: Carbide (tungsten steel) end mill is wear resistance, good toughness, heat resistance, higher hardness but is more brittle. Carbide can run at higher speed than high-speed steel.
- Tips: Adopts spray and air jet cooling to improve the use effect of the milling cutter. The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to slow down the speed and reduce the feed speed or cutting amount.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #16
uxcell 6mm Shank 2mm x 7mm Straight Flat Nose End Mill Cutter CNC Router Bits 4 Flute
Asin: B07M9MQXDW
Designed With 4 Flutes, Straight Shank, Deep Helical Groove.
Material: Hss-Al, Sharp And Durable, Bending Resistance And Abrasion Resistance.
Apply To Carbon Steel, Soft Alloy Steel, Die Steel, Tool Steel, Cast Iron, Titanium, Aluminum, Etc.
Cutting Length: 7Mm / 0.28"; Overall Length: 52Mm / 2.05".
Features
- Shank Diameter: 6mm / 0.24"; Cutting Diameter: 2mm / 0.08"
- Cutting Length: 7mm / 0.28; Overall Length: 52mm / 2.05
- Designed with 4 flutes, straight shank, deep helical groove
- Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc
- Material: HSS-AL, sharp and durable, bending resistance and abrasion resistance
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.59 x 3.15 x 0.79 inches
See On Amazon #17
uxcell 6mm Shank Keyhole Router Bit Set 5/16" 3/8" 1/2" Diameter with 1/2" to 6mm Router Collet Adapter, Carbide Tipped Wood Milling T-Slot Cutter
Asin: B09JGGB4D8 | Model: a21051600ux0023 | PartNumber: a21051600ux0023
Features: Carbide Tip With Sharp Cutting Edge, High Hardness, Wear Resistance And Long Life. Solid Hardened Steel Body With Anti-Kickback Design. The Arc Curve Design For Easy Chip Removal And Efficient Perforation..
Notices: Cannot Be Used To Cut Ferrous Metal And Non Wood Materials. Suggested Feeding Speed: 2-5M/Min; Suggested Spindle Speed: 22000-24000Rpm. Be Sure To Use Router Bits And Accessories Designed For Your Router..
Easy To Use: Use On Cnc, Woodworking Engraving Machine, Trimming Machine, Hand-Held And Table-Mounted Portable Routers. Just Slide The Bit Shank Into Your Collet Adapter And Tighten..
Applications: Widely Used For Softwoods, Hardwoods, Chipboard, Plywood, Acrylic, Particle Board And Mdf Etc. Creates T Slots For Picture Frames, Shelves, Mirrors, Cabinets, Support Fixtures And Other Wall Hangings..
Features
- Router Bit Set: 6mm shank keyhole router bit cuts T slots, and is suitable for bolts with 5/16" wide x 3/16" high head, 3/8" wide x 3/16" high head, 1/2" wide x 1/4" high head. Router collet driver adapter converts 1/2" to 6mm. Great bit tools for woodworking carpenter.
- Applications: Widely used for softwoods, hardwoods, chipboard, plywood, acrylic, particle board and MDF etc. Creates t slots for picture frames, shelves, mirrors, cabinets, support fixtures and other wall hangings.
- Features: Carbide tip with sharp cutting edge, high hardness, wear resistance and long life. Solid hardened steel body with anti-kickback design. The arc curve design for easy chip removal and efficient perforation.
- Easy to Use: Use on CNC, woodworking engraving machine, trimming machine, hand-held and table-mounted portable routers. Just slide the bit shank into your collet adapter and tighten.
- Notices: Cannot be used to cut ferrous metal and non wood materials. suggested feeding speed: 2-5m/min; suggested spindle speed: 22000-24000rpm. Be sure to use router bits and accessories designed for your router.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #18
uxcell 1/4" Shank Keyhole Router Bit 5/16" Diameter with 1/2" to 1/4" Router Collet Adapter, Carbide Tipped Wood Milling T-Slot Cutter
Asin: B09JGFFH3L | Model: a21051600ux0016 | PartNumber: a21051600ux0016
Features: Carbide Tip With Sharp Cutting Edge, High Hardness, Wear Resistance And Long Life. Solid Hardened Steel Body With Anti-Kickback Design. The Arc Curve Design For Easy Chip Removal And Efficient Perforation..
Notices: Cannot Be Used To Cut Ferrous Metal And Non Wood Materials. Suggested Feeding Speed: 2-5M/Min; Suggested Spindle Speed: 22000-24000Rpm. Be Sure To Use Router Bits And Accessories Designed For Your Router..
Easy To Use: Use On Cnc, Woodworking Engraving Machine, Trimming Machine, Hand-Held And Table-Mounted Portable Routers. Just Slide The Bit Shank Into Your Collet Adapter And Tighten..
Applications: Widely Used For Softwoods, Hardwoods, Chipboard, Plywood, Acrylic, Particle Board And Mdf Etc. Creates T Slots For Picture Frames, Shelves, Mirrors, Cabinets, Support Fixtures And Other Wall Hangings..
Features
- Router Bit Set: 1/4" shank keyhole router bit cuts T slots, and is suitable for bolts with 5/16" wide x 3/16" high head and 19/64" shaft diameter. Router collet driver adapter converts 1/2" to 1/4". Great bit tools for woodworking carpenter.
- Applications: Widely used for softwoods, hardwoods, chipboard, plywood, acrylic, particle board and MDF etc. Creates t slots for picture frames, shelves, mirrors, cabinets, support fixtures and other wall hangings.
- Features: Carbide tip with sharp cutting edge, high hardness, wear resistance and long life. Solid hardened steel body with anti-kickback design. The arc curve design for easy chip removal and efficient perforation.
- Easy to Use: Use on CNC, woodworking engraving machine, trimming machine, hand-held and table-mounted portable routers. Just slide the bit shank into your collet adapter and tighten.
- Notices: Cannot be used to cut ferrous metal and non wood materials. suggested feeding speed: 2-5m/min; suggested spindle speed: 22000-24000rpm. Be sure to use router bits and accessories designed for your router.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #19
uxcell 7/16" 5/8" Diameter Keyhole Router Bit Set 6mm Shank with 1/2" to 6mm Router Collet Adapter, Carbide Tipped Wood Milling T-Slot Cutter
Asin: B09JGD4HHR | Model: a21051600ux0029 | PartNumber: a21051600ux0029
Features: Carbide Tip With Sharp Cutting Edge, High Hardness, Wear Resistance And Long Life. Solid Hardened Steel Body With Anti-Kickback Design. The Arc Curve Design For Easy Chip Removal And Efficient Perforation..
Notices: Cannot Be Used To Cut Ferrous Metal And Non Wood Materials. Suggested Feeding Speed: 2-5M/Min; Suggested Spindle Speed: 22000-24000Rpm. Be Sure To Use Router Bits And Accessories Designed For Your Router..
Easy To Use: Use On Cnc, Woodworking Engraving Machine, Trimming Machine, Hand-Held And Table-Mounted Portable Routers. Just Slide The Bit Shank Into Your Collet Adapter And Tighten..
Applications: Widely Used For Softwoods, Hardwoods, Chipboard, Plywood, Acrylic, Particle Board And Mdf Etc. Creates T Slots For Picture Frames, Shelves, Mirrors, Cabinets, Support Fixtures And Other Wall Hangings..
Features
- Router Bit Set: 6mm shank keyhole router bit cuts T slots, and is suitable for bolts with 7/16" wide x 3/16" high head and 1/4" shaft diameter, 5/8" wide x 3/16" high head and 3/8" shaft diameter. Router collet driver adapter converts 1/2" to 6mm. Great bit tools for woodworking carpenter.
- Applications: Widely used for softwoods, hardwoods, chipboard, plywood, acrylic, particle board and MDF etc. Creates t slots for picture frames, shelves, mirrors, cabinets, support fixtures and other wall hangings.
- Features: Carbide tip with sharp cutting edge, high hardness, wear resistance and long life. Solid hardened steel body with anti-kickback design. The arc curve design for easy chip removal and efficient perforation.
- Easy to Use: Use on CNC, woodworking engraving machine, trimming machine, hand-held and table-mounted portable routers. Just slide the bit shank into your collet adapter and tighten.
- Notices: Cannot be used to cut ferrous metal and non wood materials. suggested feeding speed: 2-5m/min; suggested spindle speed: 22000-24000rpm. Be sure to use router bits and accessories designed for your router.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon
Looking For Something Else?
Search