MECCANIXITY 8mm to 8mm Inner Dia Rotatable Universal Joint Shaft Coupling Motor Shaft Coupler L35 x D14 with Screws and Wrench for RC Model
Asin: B09KN1GWRJ
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.The Universal Joint Is Made Of 45# Steel And With Electroplated Finish, Sturdy And Durable. Features With Large Transmission Torque, High Efficiency, Stable Transmission, Small Gap Impact.
In Order To Give Full Play To Its Function, Please Start The Installation Within The Maximum Allowable Eccentricity Range.
When You Installing It, Firstly Install The Two Halves Of The Coupling On The Two Connected Shafts Respectively, Then Align, Move And Adjust The Shaft To The Correct Place.
Color: Silver Tone; Outer Dia.: 14Mm/0.55Inch; Inner Dia: 8Mm X 8Mm/0.31Inch X0.31Inch; Length: 35Mm/ 1.38/ 1.38Inch; Fastening Screws: M4*0.7.
Features
- Shaft fitting accessories to connect two different shafts and make them rotate together to transmit torque. Applied for RC model car, RC model boat, 3D printers, snow blowers, grinders and other DIY projects
- Color: Silver Tone; Outer Dia.: 14mm/0.55inch; Inner Dia: 8mm x 8mm/0.31inch x0.31inch; Length: 35mm/ 1.38/ 1.38inch; Fastening Screws: M4*0.7
- The universal joint is made of 45# steel and with electroplated finish, sturdy and durable. Features with large transmission torque, high efficiency, stable transmission, small gap impact
- When you installing it, firstly install the two halves of the coupling on the two connected shafts respectively, then align, move and adjust the shaft to the correct place
- In order to give full play to its function, please start the installation within the maximum allowable eccentricity range
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon Similar To MECCANIXITY 8mm to 8mm Inner
#1
MECCANIXITY Drip Irrigation Barbed Tee 3-Way Fitting 8mm/11mm Tubing for Garden Drip Tape Tubing Sprinkler System Black Pack of 10
Asin: B09MD9ZBG5 | Model: mea210616ee0070 | PartNumber: mea210616ee0070
Made Of Pp Pom Material. Lightweight And Durable To Use..
Please Check The Size Carefully Before Ordering. You Can Dip The Tube Into Hot Water A Few Seconds If It Is Hard To Insert..
Just Loosen The Cap, Insert The Drip Tape, And Then Tighten The Cap, It Will Fit Tightly. Easy To Install, No Glue Or Other Tools Are Required..
Package Content: 10Pcs X Barbed Locking Fitting; Size: 63Mm X 37Mm X 23Mm / 2.48Inch X 1.46Inch X 0.91Inch(L*W*H)..
Features
- These fittings are used to connect 8mm inner diameter 11mm outer diameter tube, suitable for drip irrigation pipes, pipes and drip irrigation pipes. They can be applied for various occasions, such as garden, residential, farm, greenhouse horticulture, agricultural watering applications and so on.
- Package Content: 10Pcs x Barbed Locking Fitting; Size: 63mm x 37mm x 23mm / 2.48inch x 1.46inch x 0.91inch(L*W*H).
- Made of PP POM material. Lightweight and durable to use.
- Just loosen the cap, insert the drip tape, and then tighten the cap, it will fit tightly. Easy to install, no glue or other tools are required.
- Please check the size carefully before ordering. You can dip the tube into hot water a few seconds if it is hard to insert.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
Dimensions: 24.00 x 74.00 x 50.50 Millimeters
See On Amazon #2
MECCANIXITY Round End Caps Rubber Cover 50pcs 1/8" 3/16" 1/4" 5/16" 3/8" White Screw Protector for Screw Bolt Pipe
Asin: B09NRDWGK3 | Model: mea211020ee0263 | PartNumber: mea211020ee0263
Soft, Lightweight, Small Size, Durable, And Long Service Life; Rubber Material, Good Insulation; Easy To Install And Use..
Please Pay Attention To The Selection Of Rubber End Caps With Appropriate Size, Especially The Inner Diameter.
Steps Of Installation: 1. Prepare Rubber End Covers With Appropriate Size; 2. Insert The End Of Screws, Bolts, Pipes, Etc..
Vinyl End Caps, Is In Size Of : 1/8"(3Mm), 3/16"(5Mm), 1/4"(6Mm), 5/16"(8Mm), 3/8"(9.5Mm) Inner Dia..
Features
- The flexible rubber end caps are widely used for screw thread protectors, bolt caps, metal, and plastic pipe tubing end cover, furniture feet end protectors, etc.
- Vinyl end caps, is in size of : 1/8(3mm), 3/16(5mm), 1/4(6mm), 5/16(8mm), 3/8(9.5mm) inner dia.
- Soft, lightweight, small size, durable, and long service life; Rubber material, good insulation; Easy to install and use.
- Steps of installation: 1. Prepare rubber end covers with appropriate size; 2. Insert the end of screws, bolts, pipes, etc.
- Please pay attention to the selection of rubber end caps with appropriate size, especially the inner diameter
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #3
MECCANIXITY Vacuum Silicone Tubing Hose 1/8" 5/32" 3/16" 1/4" 5/16" 3/8" 1/2" ID 1/8" Wall Thick 6.6ft Blue High Temperature for Engine
Asin: B0CGJP48C9
Vacuum Hose Is Made Of High-Temperature-Resistant Silicone Material, Which Can Be Used To Connect And Replace All Kinds Of Pipes In The High-Temperature Environment Such As Engine, Etc. Vacuum Hose Is With Aging Resistance, Good Flexibility, Smooth Surface, Not Easy To Deform, And Good Sealing Performance.
Please Select A Silicone Vacuum Tubing Of Appropriate Size, Especially The Inner Diameter And Outer Diameter Of The Tubing.
Steps Of Installation: 1.Prepare A Silicone Vacuum Tubing Of An Appropriate Size; 2. Remove The Pipe To Be Replaced; 3. Install On The Equipment.
Silicone Vacuum Hose, Is In Size Of : 3Mm(1/8 Inch) 4Mm(5/32 Inch) 5Mm(3/16 Inch) 6Mm(1/4 Inch) 8Mm(5/16 Inch) 10Mm(3/8 Inch) 12Mm(1/2 Inch) Inner Dia, 9Mm(0.35 Inch) 10Mm(0.4 Inch) 11Mm(0.43 Inch) 12Mm(0.47 Inch) 14Mm(0.55 Inch) 16Mm(0.63 Inch) 18Mm(0.7 Inch) Outer Dia, 3Mm(1/8 Inch) Wall Thickness, 2M/6.6Ft Total Length, -60°C To 200°C(-76°F To 392°F) Working Temperature.
Features
- Silicone vacuum tubing is mainly used in air and liquid transportation of engines. Also can be used to transport fuel oil, lubricating oil.
- Silicone vacuum hose, is in size of : 3mm(1/8 inch) 4mm(5/32 inch) 5mm(3/16 inch) 6mm(1/4 inch) 8mm(5/16 inch) 10mm(3/8 inch) 12mm(1/2 inch) inner dia, 9mm(0.35 inch) 10mm(0.4 inch) 11mm(0.43 inch) 12mm(0.47 inch) 14mm(0.55 inch) 16mm(0.63 inch) 18mm(0.7 inch) outer dia, 3mm(1/8 inch) wall thickness, 2m/6.6ft total length, -60 C to 200 C(-76 F to 392 F) working temperature
- Vacuum hose is made of high-temperature-resistant silicone material, which can be used to connect and replace all kinds of pipes in the high-temperature environment such as engine, etc. Vacuum hose is with aging resistance, good flexibility, smooth surface, not easy to deform, and good sealing performance
- Steps of installation: 1.Prepare a silicone vacuum tubing of an appropriate size; 2. Remove the pipe to be replaced; 3. Install on the equipment
- Please select a silicone vacuum tubing of appropriate size, especially the inner diameter and outer diameter of the tubing
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #4
MECCANIXITY LED Neon Mounting Clips, Fixing Clamps Holder for 8mm Neon LED Strip Pack of 200
Asin: B09MC46QPY | Model: mea210827ee0037 | PartNumber: mea210827ee0037
Made From Pvc Plastic Materials, With Good Temperature Resistance. Transparent Color Is Much Easier To Hide On The White Wall Or Somewhere..
Please Check The Width Of Your Led Strip Before Buying..
Easy To Use, Directly Use Two Screws To Fix..
Inner Width: 7.5Mm / 0.3"; Fit For 8Mm Width Neon Led Strip; Overall Size: 14X12x11mm / 0.55"X0.47"X0.43".
Features
- These LED mounting clips are mainly for holding neon LED strips on the wall or ceiling floor. Widely used for home, office, under-counter, outdoor, restaurant, or any other area.
- Inner Width: 7.5mm / 0.3; Fit for 8mm Width Neon LED Strip; Overall Size: 14x12x11mm / 0.55x0.47x0.43
- Made from PVC plastic materials, with good temperature resistance. Transparent color is much easier to hide on the white wall or somewhere.
- Easy to use, directly use two screws to fix.
- Please check the width of your LED strip before buying.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #5
MECCANIXITY Vacuum Silicone Tubing Hose 5/32" 1/4" 5/16" 1/2" ID 1/8" Wall Thick 5ft Black High Temperature for Engine
Asin: B09DGH5M1C | Model: mea210610ee0083 | PartNumber: mea210610ee0083
Vacuum Hose Is Made Of High-Temperature-Resistant Silicone Material, Which Can Be Used To Connect And Replace All Kinds Of Pipes In The High-Temperature Environment Such As Engine, Etc. Vacuum Hose Is With Aging Resistance, Good Flexibility, Smooth Surface, Not Easy To Deform, And Good Sealing Performance.
Please Select A Silicone Vacuum Tube Of Appropriate Size, Especially The Inner Diameter And Outer Diameter Of The Tube.
Steps Of Installation: 1.Prepare A Silicone Vacuum Tube Of An Appropriate Size; 2. Remove The Pipe To Be Replaced; 3. Install On The Equipment.
Silicone Vacuum Hose, Is In Size Of : 4Mm/0.16-Inch, 6Mm/0.24-Inch, 8Mm/0.32-Inch, 12Mm/0.47-Inch Inner Dia, 10Mm/0.39-Inch, 12Mm/0.47-Inch, 14Mm/0.55-Inch, 18Mm/0.71-Inch Outer Dia, 3Mm/0.12-Inch Wall Thickness, 1.5Mm/5Ft Total Length, -60°C To 200°C(-76°F To 392°F) Working Temperature.
Features
- Silicone vacuum tube is mainly used in air and liquid transportation of engines. Also can be used to transport lubricating oil. It cannot be used as transmission oil hose. The thick wall design allows vacuum tubes to work in high-pressure environments
- Silicone vacuum hose, is in size of : 4mm/0.16-inch, 6mm/0.24-inch, 8mm/0.32-inch, 12mm/0.47-inch inner dia, 10mm/0.39-inch, 12mm/0.47-inch, 14mm/0.55-inch, 18mm/0.71-inch outer dia, 3mm/0.12-inch wall thickness, 1.5mm/5ft total length, -60 C to 200 C(-76 F to 392 F) working temperature
- Vacuum hose is made of high-temperature-resistant silicone material, which can be used to connect and replace all kinds of pipes in the high-temperature environment such as engine, etc. Vacuum hose is with aging resistance, good flexibility, smooth surface, not easy to deform, and good sealing performance
- Steps of installation: 1.Prepare a silicone vacuum tube of an appropriate size; 2. Remove the pipe to be replaced; 3. Install on the equipment
- Please select a silicone vacuum tube of appropriate size, especially the inner diameter and outer diameter of the tube
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #6
MECCANIXITY Silicone Snap in Locking Hole Plugs Rubber Panel Seal Cover Flush Type Panel Round for Kitchen Rubber Bulkheads Waterproof Sealing Plugs 4.5mm/0.18 Inch Dia Black,Pack of 30
Asin: B0CWPG77SL | Model: mea240127ee000426 | PartNumber: mea240127ee000426
It Is Made Of Silicon Material,High Elasticity, Good Insulation And Sealing Performance, Compression Resistance, Shock Absorption, Anti-Slip, Wear Resistance ,High Temperature Resistance ,Acid And Alkali Resistance, Will Not Dissolve And Swell In Acidic Liquids;.
Due To Manual Measurement, The Size May Have An Error Of +/- 1-2Mm. And A Slight Deviation In Color Due To Different Batches..
Fingertip Pressure Snap-Locks Into Its Mounting Hole..
Silicone Hole Plug,Material:Silicone;Color:Black;Outer Diameter:8Mm/0.31 Inch;Inner Diameter:2Mm/0.08 Inch;Height:8Mm/0.31 Inch;Mount Hole Diameter:4.5Mm/0.18 Inch;Width:3Mm/0.12 Inch;30Pcs X Hole Plugs;.
Features
- Round silicone plugs is suitable for Instrument and meter,aviation industry,transportation, radio motors,make up appliances, furniture manufacture and waterproof plugs, sealing plugs, test tube plugs, rubber bulkheads, caps, cylinder plug heads, threaded rubber plugs,etc.
- Silicone Hole Plug,Material:Silicone;Color:Black;Outer Diameter:8mm/0.31 Inch;Inner Diameter:2mm/0.08 Inch;Height:8mm/0.31 inch;Mount hole diameter:4.5mm/0.18 Inch;Width:3mm/0.12 Inch;30pcs x Hole Plugs;
- It is made of silicon material,High elasticity, good insulation and sealing performance, compression resistance, shock absorption, anti-slip, wear resistance ,high temperature resistance ,acid and alkali resistance, will not dissolve and swell in acidic liquids;
- Fingertip pressure snap-locks into its mounting hole.
- Due to manual measurement, the size may have an error of +/- 1-2mm. And a slight deviation in color due to different batches.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #7
MECCANIXITY Round End Caps Rubber Cover 100pcs 1/8" 3/16" 1/4" 5/16" 3/8" White Screw Protector for Screw Bolt Pipe
Asin: B09NRD1PW4 | Model: mea211020ee0264 | PartNumber: mea211020ee0264
Soft, Lightweight, Small Size, Durable, And Long Service Life; Rubber Material, Good Insulation; Easy To Install And Use..
Please Pay Attention To The Selection Of Rubber End Caps With Appropriate Size, Especially The Inner Diameter.
Steps Of Installation: 1. Prepare Rubber End Covers With Appropriate Size; 2. Insert The End Of Screws, Bolts, Pipes, Etc..
Vinyl End Caps, Is In Size Of : 1/8"(3Mm), 3/16"(5Mm), 1/4"(6Mm), 5/16"(8Mm), 3/8"(9.5Mm) Inner Dia..
Features
- The flexible rubber end caps are widely used for screw thread protectors, bolt caps, metal, and plastic pipe tubing end cover, furniture feet end protectors, etc.
- Vinyl end caps, is in size of : 1/8(3mm), 3/16(5mm), 1/4(6mm), 5/16(8mm), 3/8(9.5mm) inner dia.
- Soft, lightweight, small size, durable, and long service life; Rubber material, good insulation; Easy to install and use.
- Steps of installation: 1. Prepare rubber end covers with appropriate size; 2. Insert the end of screws, bolts, pipes, etc.
- Please pay attention to the selection of rubber end caps with appropriate size, especially the inner diameter
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #8
MECCANIXITY PVC Petrol Fuel Line Hose 3/16" x 5/16" 10ft Green for Chainsaws Lawn Mower String Trimmer Blowers Small Engines
Asin: B09DSBJWNW | Model: mea210531ee0475 | PartNumber: mea210531ee0475
The Fuel Pipe Has Strong Oil Resistance And Wear Resistance, Smooth Surface, Easy Installation, And Can Work Normally In Low Temperature Environment. It Is A Good Replacement For The Fuel Pipe On The Engine; Soft And Light Weight; Aging Resistant, Durable.
Please Select The Fuel Pipe Of Appropriate Size, Especially The Inner Diameter And Outer Diameter Of The Pipe.
Steps Of Installation: 1.Prepare A Fuel Line Hose; 2. Remove The Fuel Pipe To Be Replaced; 3. Install It.
Fuel Line Hose, Is In Size Of : 5Mm/0.2-Inch Inner Dia, 8Mm/0.31-Inch Outer Dia, 1.5Mm/0.06-Inch Wall Thickness, 3 Meters/10Ft Total Length.
Features
- Petrol fuel line hose is a very common and useful accessory used in various engines at home and in the garden. Fuel line is used for small engines for chainsaws, string trimmers, blowers, lawnmowers, etc.
- Fuel line hose, is in size of : 5mm/0.2-inch inner dia, 8mm/0.31-inch outer dia, 1.5mm/0.06-inch wall thickness, 3 meters/10ft total length
- The fuel pipe has strong oil resistance and wear resistance, smooth surface, easy installation, and can work normally in low temperature environment. It is a good replacement for the fuel pipe on the engine; Soft and light weight; Aging resistant, durable
- Steps of installation: 1.Prepare a fuel line hose; 2. Remove the fuel pipe to be replaced; 3. Install it
- Please select the fuel pipe of appropriate size, especially the inner diameter and outer diameter of the pipe
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
Dimensions: 0.04 x 120.00 x 0.31 Inches
See On Amazon #9
MECCANIXITY Petrol Fuel Line Hose 3/16" x 5/16" 10ft Clear for Chainsaws Lawn Mower String Trimmer Blowers Small Engines
Asin: B09DKH9R93 | Model: mea210608ee0035 | PartNumber: mea210608ee0035
The Fuel Pipe Has Strong Oil Resistance And Wear Resistance, Smooth Surface, Easy Installation, And Can Work Normally In Low Temperature Environment. It Is A Good Replacement For The Fuel Pipe On The Engine; Soft And Light Weight; Aging Resistant, Durable.
Please Select The Fuel Pipe Of Appropriate Size, Especially The Inner Diameter And Outer Diameter Of The Pipe.
Steps Of Installation: 1.Prepare A Fuel Line Hose; 2. Remove The Fuel Pipe To Be Replaced; 3. Install It.
Fuel Line Hose, Is In Size Of : 10Ft Long, 3/16-Inch X 5/16-Inch(5Mm X 8Mm)(Id. X Od.), 1/16-Inch(1.5Mm) Wall Thickness.
Features
- Petrol fuel line hose is a very common and useful accessory used in various engines at home and in the garden. Fuel line is used for small engines for chainsaws, string trimmers, blowers, lawnmowers, etc.
- Fuel line hose, is in size of : 10ft long, 3/16-inch x 5/16-inch(5mm x 8mm)(ID. x OD.), 1/16-inch(1.5mm) wall thickness
- The fuel pipe has strong oil resistance and wear resistance, smooth surface, easy installation, and can work normally in low temperature environment. It is a good replacement for the fuel pipe on the engine; Soft and light weight; Aging resistant, durable
- Steps of installation: 1.Prepare a fuel line hose; 2. Remove the fuel pipe to be replaced; 3. Install it
- Please select the fuel pipe of appropriate size, especially the inner diameter and outer diameter of the pipe
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
Dimensions: 0.04 x 120.00 x 0.31 Inches
See On Amazon #10
MECCANIXITY Bonded Sealing Washers M8 13.5x8x2mm Carbon Steel Nitrile Rubber Gasket, Pack of 10
Asin: B0BJ91XB16 | Model: mea220901ee0774 | PartNumber: mea220901ee0774
Fit For Size: M8; Outer Diameter: 13.5Mm; Inner Diameter: 8Mm; Thickness: 2Mm.
The Self-Centering Bonded Washers Are High-Pressure Seals That Are Used In The Mechanical, Hydraulic, And Pneumatic Pipelines.
Because The Bonded Washer Itself Acts To Retain The Gasket Material, There Is No Need For The Parts To Be Sealed To Be Shaped To Retain The Gasket. This Results In Simplified Machining And Greater Ease Of Use As Compared To Some Other Seals, Such As O-Rings.
Materials: Carbon Steel; Nitrile Butadiene Rubber: Hardness: 60A; Working Temperature Range: -20°C To 100°C (-4°F To 212°F).
Features
- The nitrile rubber is bonded by heat and pressure to the outer ring, which holds it in place. This structure increases resistance to bursting, increasing the pressure rating of the seal
- Materials: Carbon Steel; Nitrile Butadiene Rubber: Hardness: 60A; Working Temperature Range: -20 C to 100 C (-4 F to 212 F)
- Fit for Size: M8; Outer Diameter: 13.5mm; Inner Diameter: 8mm; Thickness: 2mm
- Because the bonded washer itself acts to retain the gasket material, there is no need for the parts to be sealed to be shaped to retain the gasket. This results in simplified machining and greater ease of use as compared to some other seals, such as O-rings
- The self-centering bonded washers are high-pressure seals that are used in the Mechanical, Hydraulic, and Pneumatic pipelines
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #11
MECCANIXITY 90 Degrees Elbow Copper Pipe Fitting Brazing Connection 1/4 Inch ID for HVAC Cooling Equipment, Pack of 8
Asin: B09S9N5C3G | Model: mea211218ee0646 | PartNumber: mea211218ee0646
Made Of Copper, Thick Wall, Corrosion Resistance, High Temperature And Pressure Resistance, Fast Heat Dissipation, High Surface Gloss, Uniform Density, Not Easy To Break, And Long Service Life.
Please Confirm The Inner Diameter Before Ordering.
Easy To Assemble And Disassemble.
Package Content: 8Pcs X 90 Degrees Copper Fitting; Inner Diameter: 1/4"(6.35Mm / 0.25 Inch); Size(Lxwxh): 17 X 17 X 8Mm / 0.67 X 0.67 X 0.31 Inch; Thickness: 0.6Mm.
Features
- 90 degrees elbow copper pipe fittings are mainly used for cooling solar devices, HVAC air-conditioning devices, cooling hydraulic systems, above-ground water supply pipes, etc.
- Package Content: 8pcs x 90 Degrees Copper Fitting; Inner Diameter: 1/4(6.35mm / 0.25 inch); Size(LxWxH): 17 x 17 x 8mm / 0.67 x 0.67 x 0.31 inch; Thickness: 0.6mm
- Made of copper, thick wall, corrosion resistance, high temperature and pressure resistance, fast heat dissipation, high surface gloss, uniform density, not easy to break, and long service life
- Easy to assemble and disassemble
- Please confirm the inner diameter before ordering
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #12
MECCANIXITY Straight Copper Coupling Fittings, 5/16 Inch ID Welding Joint for HVAC Air Conditioner, with Rolled Tube Stop Sweat Ends, Pack of 5
Asin: B09SCWQVX2 | Model: mea211222ee0111 | PartNumber: mea211222ee0111
Made Of Copper With Good Toughness, Easy To Weld, Stable Performance And Long Service Life. Light External Surface, Accurate Size. With Rolled Tube Stop And Sweat Ends, Easy To Connect..
Please Confirm The Inner Diameter Before Ordering.
Replace The Old Coupling Fitting, Easy Installation.
Package Content: 5Pcs X Copper Coupling Fitting; Inner Diameter: 5/16"(8Mm / 0.31 Inch); Length: 16Mm / 0.63 Inch; Thickness: 0.7Mm.
Features
- Air conditioning and refrigeration accessories adapter, widely used to connect pipelines, such as HVAC air-conditioning devices, refrigeration or hydraulic applications, etc
- Package Content: 5pcs x Copper Coupling Fitting; Inner Diameter: 5/16(8mm / 0.31 inch); Length: 16mm / 0.63 inch; Thickness: 0.7mm
- Made of copper with good toughness, easy to weld, stable performance and long service life. Light external surface, accurate size. With rolled tube stop and sweat ends, easy to connect.
- Replace the old coupling fitting, easy installation
- Please confirm the inner diameter before ordering
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #13
MECCANIXITY M8x30mm Hollow Screw Bolts External Hexagon Fasteners with Nuts, 304 Stainless Steel Pack of 5
Asin: B09V7P9XH3 | Model: mea220102ee0059 | PartNumber: mea220102ee0059
Made Of 304 Stainless Steel Material, Good Rust And Corrosion Resistance, Long Service Life. Hollow Center Design, The Inner Hole Is Convenient For Cable To Pass..
Please Check The Thread Size Before Buying This Item..
Easy To Use, Screw The Bolts In The Thread And Then Fasten With The Nut..
Screw Thread Size: M8; Screw Thread Pitch: 1.25Mm; Screw Thread Length: 30Mm / 1.18"; Screw Overall Size: 13X35.3Mm / 0.51"X1.39"(W*H); Nut Overall Size: 13X6.5Mm / 0.51"X0.26"(W*H); Hole Inner Dia.: 4.2Mm / 0.17"; Package Included: 5 X Screw Bolts, 5 X Nuts.
Features
- These hollow screw bolts with nuts have multi-use applications. Good to connect two parts together. Mainly used for fastening chandeliers or other lights on the ceiling. Besides, it also can be used on cabinets, furniture, industrial, DIY projects.
- Screw Thread Size: M8; Screw Thread Pitch: 1.25mm; Screw Thread Length: 30mm / 1.18; Screw Overall Size: 13x35.3mm / 0.51x1.39(W*H); Nut Overall Size: 13x6.5mm / 0.51x0.26(W*H); Hole Inner Dia.: 4.2mm / 0.17; Package Included: 5 x Screw Bolts, 5 x Nuts
- Made of 304 stainless steel material, good rust and corrosion resistance, long service life. Hollow center design, the inner hole is convenient for cable to pass.
- Easy to use, screw the bolts in the thread and then fasten with the nut.
- Please check the thread size before buying this item.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #14
MECCANIXITY 6Pcs T Type Rubber Grommet Mount Dia 13mm ID 8mm H 12mm Seal Protection Flexible Hole Plugs for Cable Pipe White
Asin: B0CBVMMLTT | Model: mea230607ee0018 | PartNumber: mea230607ee0018
The Rubber Grommets Are Made Of Silicone Material That Offers Excellent Flexibility, Shock Resistance, And Good Elasticity. They Are Waterproof, Dustproof And Have Strong Insulation, Which Is Suitable To Use Outdoors..
Before Using These Rubber Grommets, Please Ensure That The Grommet's Dimensions Match Your Cables' Sizes. Do Not Force The Cable Or Wire Through The Grommet If It Does Not Fit Properly..
To Use The Rubber Grommets, Simply Insert The Cable Or Wire Through The Grommet's Center Hole And Then Install The Grommet Into The Desired Location..
Mounting Hole Dia.: 13Mm/0.51-Inch; Inner Diameter: 8Mm/0.31-Inch; Height: 12Mm/0.47-Inch; Head Thickness: 2Mm/0.08-Inch; In The Package Of: 6 X Rubber Grommet.
Features
- These are the grommets used to cover panel holes. Rubber grommets grip wires and cables passing through holes, keeping them secure while protecting them from cuts and snags. The rubber grommets are mainly used to protect cables or wires from being scratched by electrical boxes and some wooden boxes. They are widely applied for hole plugging, outlet sealing, and other industrial equipment.
- Mounting Hole Dia.: 13mm/0.51-inch; Inner Diameter: 8mm/0.31-inch; Height: 12mm/0.47-inch; Head Thickness: 2mm/0.08-inch; In the package of: 6 x Rubber Grommet
- The rubber grommets are made of silicone material that offers excellent flexibility, shock resistance, and good elasticity. They are waterproof, dustproof and have strong insulation, which is suitable to use outdoors.
- To use the Rubber Grommets, simply insert the cable or wire through the grommet's center hole and then install the grommet into the desired location.
- Before using these Rubber Grommets, please ensure that the grommet's dimensions match your cables' sizes. Do not force the cable or wire through the grommet if it does not fit properly.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #15
MECCANIXITY Ratchet Strap S Hook Load 6613 Lbs for 1.2" Tie Down Strap Webbing Car Truck Trailer Pack of 4
Asin: B0BB2PVS4Q
Advantage: Made Of Sturdy And Durable Metal Material With A Load-Bearing Capacity Of Up To 1500Kg. Hooks Are Heat Treated For Higher Wear And Corrosion Resistance. Easy To Install And Disassemble.S Hook End Holds Strap Up To 1.2" Wide..
Note: Pay Attention To The Size Of The Inner Width, Please Measure The Bandwidth Of The Product Or Bundled Tape Before Purchasing. Please Make Sure The Hooks And Straps Are Securely Installed Before Starting To Use..
Steps Of Installation: 1. Securely Attach The Hook On One End Of The Cargo Lashing Strap To One End Of The Cargo; 2. The Other End Of The Webbing Is Passed Through The Hole In The Tensioner Ratchet; 3. Turn The Tensioner Up And Down To Prevent The Strap From Loosening..
Color:Zinc Color; Material: Metal; Total Size: 105 X 41Mm / 4.13 X 1.61″ (L*W); Hook Opening Width: 27Mm / 1.06″; Inner Width: 25Mm / 0.98″; Wire Diameter: 8Mm / 0.31″; Package Content: 4 X Strap Hook.
Features
- Application: Strap Hook is mainly used for the replacement of the strap clips. High load strap hook can be used on the end of cargo strap for truck, trailer and other transport tools.
- Color:Zinc Color; Material: Metal; Total Size: 105 x 41mm / 4.13 x 1.61 (L*W); Hook Opening Width: 27mm / 1.06 ; Inner Width: 25mm / 0.98 ; Wire Diameter: 8mm / 0.31 ; Package Content: 4 x Strap Hook
- Advantage: Made of sturdy and durable metal material with a load-bearing capacity of up to 1500kg. Hooks are heat treated for higher wear and corrosion resistance. Easy to install and disassemble.S hook end holds strap up to 1.2 wide.
- Steps of Installation: 1. Securely attach the hook on one end of the cargo lashing strap to one end of the cargo; 2. The other end of the webbing is passed through the hole in the tensioner ratchet; 3. Turn the tensioner up and down to prevent the strap from loosening.
- NOTE: Pay attention to the size of the inner width, please measure the bandwidth of the product or bundled tape before purchasing. Please make sure the hooks and straps are securely installed before starting to use.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
Dimensions: 0.04 x 4.13 x 1.61 inches
See On Amazon #16
MECCANIXITY Tee Y Type Copper Fitting Welding Joint Split Union Intersection 6.35mm or 1/4 Inch ID for HVAC, Air Conditioning Refrigeration System, Pack of 3
Asin: B0BJ74JT4Q | Model: mea220725ee0908 | PartNumber: mea220725ee0908
Made Of Copper With Good Toughness, Stable Performance And Long Service Life. Light External Surface, Accurate Size..
Please Confirm The Inner Diameter Before Ordering..
Prepare The Copper Pipe Or Other Device Which Needs A Connection Of Copper Fitting. Install Them And Soldering..
The Specification Of Our Product Is: Package Content: 3Pcs X Copper Pipe Fitting; Inner Diameter: 6.35Mm / 0.25 Inch(1/4"); Outer Diameter Of Single Hole End: 9Mm / 0.35 Inch; Outer Diameter Of Two Hole End: 8Mm / 0.32 Inch; Overall Size: 20X36mm / 0.79X1.42 Inch(W*L).
Features
- Copper pipe fittings are used to connect pipe components of copper pipes, soldering to connect. It is widely used in jointing copper pipes. Mainly for HVAC air-conditioning devices, refrigeration system, heat pump type water heater, water pipe plumbing and so on.
- The specification of our product is: Package Content: 3pcs x Copper Pipe Fitting; Inner Diameter: 6.35mm / 0.25 inch(1/4); Outer Diameter of Single Hole End: 9mm / 0.35 inch; Outer Diameter of Two Hole End: 8mm / 0.32 inch; Overall Size: 20x36mm / 0.79x1.42 inch(W*L)
- Made of copper with good toughness, stable performance and long service life. Light external surface, accurate size.
- Prepare the copper pipe or other device which needs a connection of copper fitting. Install them and soldering.
- Please confirm the inner diameter before ordering.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #17
MECCANIXITY Bonded Sealing Washers M8 25x8x3.4mm Carbon Steel Nitrile Rubber Gasket, Pack of 50
Asin: B0BKQ3D7GX | Model: mea220830ee0698 | PartNumber: mea220830ee0698
Fit For Size: M8; Outer Diameter: 25Mm; Inner Diameter: 8Mm; Thickness: 3.4Mm.
The Self-Centering Bonded Washers Are High-Pressure Seals That Are Used In The Mechanical, Hydraulic, And Pneumatic Pipelines.
Because The Bonded Washer Itself Acts To Retain The Gasket Material, There Is No Need For The Parts To Be Sealed To Be Shaped To Retain The Gasket. This Results In Simplified Machining And Greater Ease Of Use As Compared To Some Other Seals, Such As O-Rings.
Materials: Galvanized Carbon Steel; Nitrile Butadiene Rubber: Hardness: 60A; Working Temperature Range: -20°C To 100°C (-4°F To 212°F).
Features
- The nitrile rubber is bonded by heat and pressure to the outer ring, which holds it in place. This structure increases resistance to bursting, increasing the pressure rating of the seal
- Materials: Galvanized Carbon Steel; Nitrile Butadiene Rubber: Hardness: 60A; Working Temperature Range: -20 C to 100 C (-4 F to 212 F)
- Fit for Size: M8; Outer Diameter: 25mm; Inner Diameter: 8mm; Thickness: 3.4mm
- Because the bonded washer itself acts to retain the gasket material, there is no need for the parts to be sealed to be shaped to retain the gasket. This results in simplified machining and greater ease of use as compared to some other seals, such as O-rings
- The self-centering bonded washers are high-pressure seals that are used in the Mechanical, Hydraulic, and Pneumatic pipelines
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #18
MECCANIXITY Reducing Copper Coupling Fitting Straight with Sweat End, 5/16 x 1/4 Inch ID for HVAC Refrigeration Adapter, Pack of 5
Asin: B09Q659LN2 | Model: mea211214ee0039 | PartNumber: mea211214ee0039
Made Of Copper With Good Toughness, Easy To Weld, Stable Performance And Long Service Life. Light External Surface, Accurate Size.
Please Confirm The Inner Diameter Before Ordering.
Replace The Old Coupling Fitting, Easy Installation.
Package Content: 5Pcs X Reducing Copper Coupling Fitting; Small Inner Diameter: 1/4"(6.35Mm / 0.25 Inch); Big Inner Diameter: 5/16"(8Mm / 0.31 Inch); Length: 18Mm / 0.7 Inch; Thickness: 0.75Mm / 0.03 Inch.
Features
- Air conditioning and refrigeration accessories plumbing adapter, copper reducing brazing, widely used to connect pipelines, such as HVAC air-conditioning devices, refrigeration or hydraulic applications, etc.
- Package Content: 5pcs x Reducing Copper Coupling Fitting; Small Inner Diameter: 1/4(6.35mm / 0.25 inch); Big Inner Diameter: 5/16(8mm / 0.31 inch); Length: 18mm / 0.7 inch; Thickness: 0.75mm / 0.03 inch
- Made of copper with good toughness, easy to weld, stable performance and long service life. Light external surface, accurate size
- Replace the old coupling fitting, easy installation
- Please confirm the inner diameter before ordering
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #19
MECCANIXITY LED Neon Mounting Clips, Fixing Clamps Holder for 8mm Neon LED Strip Pack of 100
Asin: B09MC49QJR | Model: mea210827ee0039 | PartNumber: mea210827ee0039
Made From Pvc Plastic Materials, With Good Temperature Resistance. Transparent Color Is Much Easier To Hide On The White Wall Or Somewhere..
Please Check The Width Of Your Led Strip Before Buying..
Easy To Use, Directly Use Two Screws To Fix..
Inner Width: 7.5Mm / 0.3"; Fit For 8Mm Width Neon Led Strip; Overall Size: 14X12x11mm / 0.55"X0.47"X0.43".
Features
- These LED mounting clips are mainly for holding neon LED strips on the wall or ceiling floor. Widely used for home, office, under-counter, outdoor, restaurant, or any other area.
- Inner Width: 7.5mm / 0.3; Fit for 8mm Width Neon LED Strip; Overall Size: 14x12x11mm / 0.55x0.47x0.43
- Made from PVC plastic materials, with good temperature resistance. Transparent color is much easier to hide on the white wall or somewhere.
- Easy to use, directly use two screws to fix.
- Please check the width of your LED strip before buying.
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon #20
MECCANIXITY Plastic Model Tube ABS Round Tube 5/16" OD 10" White Easy Processing for Architectural Model Making DIY 5 Pack
Asin: B09GTVS71H | Model: mea210601ee0138 | PartNumber: mea210601ee0138
Abs Plastic Is Of Good Toughness And Strength. The Abs Model Tube Can Be Bent By Hand, And Is Not Easy To Break. Abs Pipes Can Also Be Bent By Heating; Easy Processing, Easy To Cut And You Can Cut The Length You Want, Good Material For Building Model..
Please Select The Model Pipe With Appropriate Size.
Steps Of Installation: 1. Prepare Abs Model Pipe With Appropriate Size; 2. Cut To The Length You Want; 3. For Building Model.
Model Making Tube, Is In Size Of : 6.5Mm(0.26-Inch) Inner Dia X 8Mm(0.31-Inch) Outer Dia, 250Mm(10-Inch) Total Length.
Features
- The model tube is suitable for DIY sand table making, DIY building model making, DIY building scene making, and various DIY handicrafts making
- Model making tube, is in size of : 6.5mm(0.26-inch) inner dia x 8mm(0.31-inch) outer dia, 250mm(10-inch) total length
- ABS plastic is of good toughness and strength. The ABS model tube can be bent by hand, and is not easy to break. ABS pipes can also be bent by heating; Easy processing, easy to cut and you can cut the length you want, good material for building model.
- Steps of installation: 1. Prepare ABS model pipe with appropriate size; 2. Cut to the length you want; 3. For building model
- Please select the model pipe with appropriate size
- See more on Amazon...
Brand: MECCANIXITY | Manufacturer: MECCANIXITY
See On Amazon
Looking For Something Else?
Search