uxcell Carbide Twist Drill Bits 5mm, Metric Spiral Flutes Straight Shank Tungsten Steel Drilling Tool for Stainless Steel Alloy Metal
Asin: B09L1L53BF | Model: a21072400ux0388 | PartNumber: a21072400ux0388
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Material: Constructed From Yg10x Carbide (Tungsten Steel), The Drill Bit Is Hardened Up To 91.5Hra, Wear Resistance, Corrosion Resistance, Heat Resistance, And The Bending Strength Is Greater Than Or Equal To 2800 N/Mm2..
Tips: Used On Machining Centers, Cnc Lathes. Adapt To Several Kinds Of Cooling Conditions, Such As Oil Mist, Water, Oil, Air Cooling. It Is Not Recommended To Be Used With A Hand Drill. Hand Drill Is Easy To Shake, Poor Stability, Which Makes Drill Bit Easy To Twist Off..
Features: Carbide Tool Offers Long Tool Life And Faster Cutting Speeds Than Other Substrates, And It Is Higher Hardness But Is More Brittle. Carbide Material With Good Cutting Performance, Can Ensure High Work Efficiency..
Wide Applications: Suitable For Precision Cutting Of Stainless Steel, Alloy Steel, Carbon Steel, Tool Steel Non-Ferrous Metal, Copper, Plastics, Etc.. Designed For Drilling Abrasive Materials When Drilling Accuracy Must Be Maintained. Can Be Used In High Temperature Drilling Applications..
Features
- Twist Drill Bits: Drilling Diameter: 5mm / 0.197"; Flute Length: 35mm / 1.38";Overall Length: 60mm / 2.36". Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches.
- Wide Applications: Suitable for precision cutting of stainless steel, alloy steel, carbon steel, tool steel non-ferrous metal, copper, plastics, etc.. Designed for drilling abrasive materials when drilling accuracy must be maintained. Can be used in high temperature drilling applications.
- Material: Constructed from YG10X carbide (tungsten steel), the drill bit is hardened up to 91.5HRA, wear resistance, corrosion resistance, heat resistance, and the bending strength is greater than or equal to 2800 N/mm2.
- Features: Carbide tool offers long tool life and faster cutting speeds than other substrates, and it is higher hardness but is more brittle. Carbide material with good cutting performance, can ensure high work efficiency.
- Tips: Used on machining centers, CNC lathes. Adapt to several kinds of cooling conditions, such as oil mist, water, oil, air cooling. It is not recommended to be used with a hand drill. Hand drill is easy to shake, poor stability, which makes drill bit easy to twist off.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon Similar To uxcell Carbide Twist Drill Bits
#1
uxcell 6pcs Jobber Drill Bits 1mm (0.039") Black Nitride & Gold Titanium Coated M2 High Speed Steel (HSS) Twist Drill Bits for Stainless Steel Aluminum Alloy Metal
Asin: B0CN9HX6T1
Black & Gold Finish: Black Nitride And Gold Titanium Dual Coatings Can Apply Lubricant Better For Smoother Drilling And Are More Durable And Corrosion Resistant. Sharp Cutting Edges Provide Neat And Smooth Cuts. Large Spiral Grooves Facilitate The Export Of Metal Chips..
Tips: Use An Appropriate Lubricant To Reduce Friction And Heat Build-Up. Controlling The Speed Is Very Important, Recommended Speed: 100-800Rpm/Min. The Larger The Diameter, The Slower The Speed Required. If The Hole Is Larger Than 6Mm, First Drill A Small Hole With A 3.2Mm-4Mm Drill Bit, And Then Use A Larger Drill Bit To Enlarge The Hole..
Wide Applications: Drill Bits Produce Holes In Stainless Steel, Cast Iron, A3 Steel, Carbon Steel, Aluminum Alloy, Copper, Wood And Plastic. Most Suitable For Drilling Metals With A Hardness Less Than Hrc38, And Cannot Drill Quenched Metals, Tiles, Concrete, Walls, Stones..
M2 High Speed Steel: M2 High Speed Steel (Hrc64-66) Drill Bits Offer Excellent Heat Resistance And Hardness For Durability And Longevity, As Well As Good Cutting Performance And Accuracy For Clean, Precise Holes With Minimal Burrs..
Features
- Twist Drill Bits: Cutting edge diameter: 1mm / 0.039"; round shank diameter: 1mm / 0.039"; cutting edge length: 12mm / 0.47"; overall length: 34mm / 1.34"; split point: 135 degree. Used with hand drills, drill presses, bench drills, machining centers, CNC lathes, etc.
- M2 High Speed Steel: M2 high speed steel (HRC64-66) drill bits offer excellent heat resistance and hardness for durability and longevity, as well as good cutting performance and accuracy for clean, precise holes with minimal burrs.
- Black & Gold Finish: Black nitride and gold titanium dual coatings can apply lubricant better for smoother drilling and are more durable and corrosion resistant. Sharp cutting edges provide neat and smooth cuts. Large spiral grooves facilitate the export of metal chips.
- Wide Applications: Drill bits produce holes in stainless steel, cast iron, A3 steel, carbon steel, aluminum alloy, copper, wood and plastic. Most suitable for drilling metals with a hardness less than HRC38, and cannot drill quenched metals, tiles, concrete, walls, stones.
- Tips: Use an appropriate lubricant to reduce friction and heat build-up. Controlling the speed is very important, recommended speed: 100-800rpm/min. The larger the diameter, the slower the speed required. If the hole is larger than 6mm, first drill a small hole with a 3.2mm-4mm drill bit, and then use a larger drill bit to enlarge the hole.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #2
uxcell Solid Carbide Drill Bits, 5mm C2/K20 Tungsten Carbide Jobber Drill Bits Straight Shank Drilling Tool for Stainless Steel Aluminum Iron Metal Plastic 2pcs
Asin: B09WYLTVSY | Model: a22021800ux0614 | PartNumber: a22021800ux0614
Material: Constructed From Medium Grain C2/K20 Tungsten Carbide, The Drill Bit Has Good Toughness, High Hardness (Hra89) And Wear Resistance. With Good Milling And Cutting Performance, Can Ensure High Work Efficiency. Carbide Tool Offers Faster Cutting Speeds Than Other Substrates..
Tips: Used On Machining Centers, Cnc Lathes. The Longer The Length Of The Tool Clamped By The Chuck, The Better. If The Clamping Length Is Shorter, You Need To Lower The Feed Rate And Cutting Speed To Reduce Vibration And Extend The Tool Life..
Features: Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting And No Glitches. Suitable Lubricant Is Conducive To Cutting Or Cooling, Making Cutting Easier, Improving Smoothness And Dimensional Accuracy..
Wide Applications: Widely Used For Drilling Non-Ferrous Metal, Cast Iron, Stainless Steel, Aluminum, Copper, Alloy Steel, Plastic, Wood. Designed With The Base Substrate Without Any Additional Coatings, Suitable For Wide Ranges Of Applications..
Features
- Twist Drill Bits: Drilling Diameter: 5mm / 0.197"; Flute Length: 28mm / 1.1"; Overall Length: 50mm / 1.97"; Cutting Hardness (Max.): HRC45. Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches.
- Wide Applications: Widely used for drilling non-ferrous metal, cast iron, stainless steel, aluminum, copper, alloy steel, plastic, wood. Designed with the base substrate without any additional coatings, suitable for wide ranges of applications.
- Material: Constructed from medium grain C2/K20 tungsten carbide, the drill bit has good toughness, high hardness (HRA89) and wear resistance. With good milling and cutting performance, can ensure high work efficiency. Carbide tool offers faster cutting speeds than other substrates.
- Features: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy.
- Tips: Used on machining centers, CNC lathes. The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #3
uxcell PCB Drill Bits 0.3mm-1.2mm Tungsten Carbide Rotary Tool Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8 Inch Shank 1 Set (10 Pcs)
Asin: B07ZVT1W4L | Model: a19091500ux0227 | PartNumber: a19091500ux0227
Spiral Flute Bits: Tip Spiral Flute Drill Bits With Sharper Cutting Edge, Reduce Cutting Force And Prevent Drill Broken, Improve The Drilling Accuracy, And Effectively Discharge Accumulated Chips.
Great Use: Great For Pc Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit For: Pcb Drilling Machines, Engraving Machine, Cnc And High Precision Special Drilling Equipment.
High Precision: With Sharp Cutting Edge, Milling Groove And Clean Surface, These Sets Of Tool Work Quickly And Cleanly, No Glitches Or Scrap Left.The Positioning Ring Design, Can Reduce Installation And Commissioning Time.
Long Tool Life: With High Hardness, High Wear Resistance, High Strength, Resistance To Bending, Anti-Impairment. Made From Tungsten Carbide For Precise, Easy Experience.
Features
- Specification: Cutting edge diameter (CED): 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, 1.1mm, 1.2mm; shank diameter: 3mm / 1/8" (approx.) overall length: 38mm / 1-1/2" (approx.)
- Long Tool Life: With high hardness, high wear resistance, high strength, resistance to bending, anti-impairment. Made from Tungsten Carbide for precise, easy experience
- Spiral Flute Bits: Tip spiral flute drill bits with sharper cutting edge, reduce cutting force and prevent drill broken, improve the drilling accuracy, and effectively discharge accumulated chips
- High Precision: With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left.The positioning ring design, can reduce installation and commissioning time
- Great Use: Great for PC Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit for: PCB drilling machines, engraving machine, CNC and high precision special drilling equipment
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #4
uxcell 12pcs Jobber Drill Bits 2.5mm (0.098") Black Nitride & Gold Titanium Coated M2 High Speed Steel (HSS) Twist Drill Bits for Stainless Steel Aluminum Alloy Metal
Asin: B0CN9HKT68
Black & Gold Finish: Black Nitride And Gold Titanium Dual Coatings Can Apply Lubricant Better For Smoother Drilling And Are More Durable And Corrosion Resistant. Sharp Cutting Edges Provide Neat And Smooth Cuts. Large Spiral Grooves Facilitate The Export Of Metal Chips..
Tips: Use An Appropriate Lubricant To Reduce Friction And Heat Build-Up. Controlling The Speed Is Very Important, Recommended Speed: 100-800Rpm/Min. The Larger The Diameter, The Slower The Speed Required. If The Hole Is Larger Than 6Mm, First Drill A Small Hole With A 3.2Mm-4Mm Drill Bit, And Then Use A Larger Drill Bit To Enlarge The Hole..
Wide Applications: Drill Bits Produce Holes In Stainless Steel, Cast Iron, A3 Steel, Carbon Steel, Aluminum Alloy, Copper, Wood And Plastic. Most Suitable For Drilling Metals With A Hardness Less Than Hrc38, And Cannot Drill Quenched Metals, Tiles, Concrete, Walls, Stones..
M2 High Speed Steel: M2 High Speed Steel (Hrc64-66) Drill Bits Offer Excellent Heat Resistance And Hardness For Durability And Longevity, As Well As Good Cutting Performance And Accuracy For Clean, Precise Holes With Minimal Burrs..
Features
- Twist Drill Bits: Cutting edge diameter: 2.5mm / 0.098"; round shank diameter: 2.5mm / 0.098"; cutting edge length: 30mm / 1.18"; overall length: 57mm / 2.24"; split point: 135 degree. Used with hand drills, drill presses, bench drills, machining centers, CNC lathes, etc.
- M2 High Speed Steel: M2 high speed steel (HRC64-66) drill bits offer excellent heat resistance and hardness for durability and longevity, as well as good cutting performance and accuracy for clean, precise holes with minimal burrs.
- Black & Gold Finish: Black nitride and gold titanium dual coatings can apply lubricant better for smoother drilling and are more durable and corrosion resistant. Sharp cutting edges provide neat and smooth cuts. Large spiral grooves facilitate the export of metal chips.
- Wide Applications: Drill bits produce holes in stainless steel, cast iron, A3 steel, carbon steel, aluminum alloy, copper, wood and plastic. Most suitable for drilling metals with a hardness less than HRC38, and cannot drill quenched metals, tiles, concrete, walls, stones.
- Tips: Use an appropriate lubricant to reduce friction and heat build-up. Controlling the speed is very important, recommended speed: 100-800rpm/min. The larger the diameter, the slower the speed required. If the hole is larger than 6mm, first drill a small hole with a 3.2mm-4mm drill bit, and then use a larger drill bit to enlarge the hole.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #5
uxcell Solid Carbide Drill Bits, 3mm C2/K20 Tungsten Carbide Jobber Drill Bits Straight Shank Drilling Tool for Stainless Steel Aluminum Iron Metal Plastic 2pcs
Asin: B09XDXT5VG | Model: a22021800ux0574 | PartNumber: a22021800ux0574
Material: Constructed From Medium Grain C2/K20 Tungsten Carbide, The Drill Bit Has Good Toughness, High Hardness (Hra89) And Wear Resistance. With Good Milling And Cutting Performance, Can Ensure High Work Efficiency. Carbide Tool Offers Faster Cutting Speeds Than Other Substrates..
Tips: Used On Machining Centers, Cnc Lathes. The Longer The Length Of The Tool Clamped By The Chuck, The Better. If The Clamping Length Is Shorter, You Need To Lower The Feed Rate And Cutting Speed To Reduce Vibration And Extend The Tool Life..
Features: Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting And No Glitches. Suitable Lubricant Is Conducive To Cutting Or Cooling, Making Cutting Easier, Improving Smoothness And Dimensional Accuracy..
Wide Applications: Widely Used For Drilling Non-Ferrous Metal, Cast Iron, Stainless Steel, Aluminum, Copper, Alloy Steel, Plastic, Wood. Designed With The Base Substrate Without Any Additional Coatings, Suitable For Wide Ranges Of Applications..
Features
- Twist Drill Bits: Drilling Diameter: 3mm / 0.118"; Flute Length: 20mm / 0.79"; Overall Length: 40mm / 1.57"; Cutting Hardness (Max.): HRC45. Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches.
- Wide Applications: Widely used for drilling non-ferrous metal, cast iron, stainless steel, aluminum, copper, alloy steel, plastic, wood. Designed with the base substrate without any additional coatings, suitable for wide ranges of applications.
- Material: Constructed from medium grain C2/K20 tungsten carbide, the drill bit has good toughness, high hardness (HRA89) and wear resistance. With good milling and cutting performance, can ensure high work efficiency. Carbide tool offers faster cutting speeds than other substrates.
- Features: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy.
- Tips: Used on machining centers, CNC lathes. The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #6
uxcell PCB Drill Bits 1.1mm-2.0mm Tungsten Carbide Rotary Tool Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8 Inch Shank 1 Set (10 Pcs)
Asin: B07ZVSJZXN | Model: a19091500ux0224 | PartNumber: a19091500ux0224
Spiral Flute Bits: Tip Spiral Flute Drill Bits With Sharper Cutting Edge, Reduce Cutting Force And Prevent Drill Broken, Improve The Drilling Accuracy, And Effectively Discharge Accumulated Chips.
Great Use: Great For Pc Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit For: Pcb Drilling Machines, Engraving Machine, Cnc And High Precision Special Drilling Equipment.
High Precision: With Sharp Cutting Edge, Milling Groove And Clean Surface, These Sets Of Tool Work Quickly And Cleanly, No Glitches Or Scrap Left.The Positioning Ring Design, Can Reduce Installation And Commissioning Time.
Long Tool Life: With High Hardness, High Wear Resistance, High Strength, Resistance To Bending, Anti-Impairment. Made From Tungsten Carbide For Precise, Easy Experience.
Features
- Specification: Cutting edge diameter (CED): 1.1mm, 1.2mm, 1.3mm, 1.4mm, 1.5mm, 1.6mm, 1.7mm, 1.8mm, 1.9mm, 2.0mm; Cutting Edge Length: 10.5mm, 10.5mm, 12mm, 10.5mm, 12mm, 10.5mm, 12mm, 12mm, 12mm, 12mm; shank diameter: 3mm / 1/8" (approx.) overall length: 38mm / 1-1/2" (approx.)
- Long Tool Life: With high hardness, high wear resistance, high strength, resistance to bending, anti-impairment. Made from Tungsten Carbide for precise, easy experience
- Spiral Flute Bits: Tip spiral flute drill bits with sharper cutting edge, reduce cutting force and prevent drill broken, improve the drilling accuracy, and effectively discharge accumulated chips
- High Precision: With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left.The positioning ring design, can reduce installation and commissioning time
- Great Use: Great for PC Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit for: PCB drilling machines, engraving machine, CNC and high precision special drilling equipment
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #7
uxcell Solid Carbide Drill Bits, 2.5mm C2/K20 Tungsten Carbide Jobber Drill Bits Straight Shank Drilling Tool for Stainless Steel Aluminum Iron Metal Plastic
Asin: B09XDXM8JJ | Model: a22021800ux0558 | PartNumber: a22021800ux0558
Material: Constructed From Medium Grain C2/K20 Tungsten Carbide, The Drill Bit Has Good Toughness, High Hardness (Hra89) And Wear Resistance. With Good Milling And Cutting Performance, Can Ensure High Work Efficiency. Carbide Tool Offers Faster Cutting Speeds Than Other Substrates..
Tips: Used On Machining Centers, Cnc Lathes. The Longer The Length Of The Tool Clamped By The Chuck, The Better. If The Clamping Length Is Shorter, You Need To Lower The Feed Rate And Cutting Speed To Reduce Vibration And Extend The Tool Life..
Features: Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting And No Glitches. Suitable Lubricant Is Conducive To Cutting Or Cooling, Making Cutting Easier, Improving Smoothness And Dimensional Accuracy..
Wide Applications: Widely Used For Drilling Non-Ferrous Metal, Cast Iron, Stainless Steel, Aluminum, Copper, Alloy Steel, Plastic, Wood. Designed With The Base Substrate Without Any Additional Coatings, Suitable For Wide Ranges Of Applications..
Features
- Twist Drill Bits: Drilling Diameter: 2.5mm / 0.098"; Flute Length: 20mm / 0.79"; Overall Length: 40mm / 1.57"; Cutting Hardness (Max.): HRC45. Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches.
- Wide Applications: Widely used for drilling non-ferrous metal, cast iron, stainless steel, aluminum, copper, alloy steel, plastic, wood. Designed with the base substrate without any additional coatings, suitable for wide ranges of applications.
- Material: Constructed from medium grain C2/K20 tungsten carbide, the drill bit has good toughness, high hardness (HRA89) and wear resistance. With good milling and cutting performance, can ensure high work efficiency. Carbide tool offers faster cutting speeds than other substrates.
- Features: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy.
- Tips: Used on machining centers, CNC lathes. The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #8
uxcell 12pcs Jobber Drill Bits 5mm (0.197") Black Nitride & Gold Titanium Coated M2 High Speed Steel (HSS) Twist Drill Bits for Stainless Steel Aluminum Alloy Metal
Asin: B0CN9GJY3R
Black & Gold Finish: Black Nitride And Gold Titanium Dual Coatings Can Apply Lubricant Better For Smoother Drilling And Are More Durable And Corrosion Resistant. Sharp Cutting Edges Provide Neat And Smooth Cuts. Large Spiral Grooves Facilitate The Export Of Metal Chips..
Tips: Use An Appropriate Lubricant To Reduce Friction And Heat Build-Up. Controlling The Speed Is Very Important, Recommended Speed: 100-800Rpm/Min. The Larger The Diameter, The Slower The Speed Required. If The Hole Is Larger Than 6Mm, First Drill A Small Hole With A 3.2Mm-4Mm Drill Bit, And Then Use A Larger Drill Bit To Enlarge The Hole..
Wide Applications: Drill Bits Produce Holes In Stainless Steel, Cast Iron, A3 Steel, Carbon Steel, Aluminum Alloy, Copper, Wood And Plastic. Most Suitable For Drilling Metals With A Hardness Less Than Hrc38, And Cannot Drill Quenched Metals, Tiles, Concrete, Walls, Stones..
M2 High Speed Steel: M2 High Speed Steel (Hrc64-66) Drill Bits Offer Excellent Heat Resistance And Hardness For Durability And Longevity, As Well As Good Cutting Performance And Accuracy For Clean, Precise Holes With Minimal Burrs..
Features
- Twist Drill Bits: Cutting edge diameter: 5mm / 0.197"; round shank diameter: 5mm / 0.197"; cutting edge length: 59mm / 2.32"; overall length: 85mm / 3.35"; split point: 135 degree. Used with hand drills, drill presses, bench drills, machining centers, CNC lathes, etc.
- M2 High Speed Steel: M2 high speed steel (HRC64-66) drill bits offer excellent heat resistance and hardness for durability and longevity, as well as good cutting performance and accuracy for clean, precise holes with minimal burrs.
- Black & Gold Finish: Black nitride and gold titanium dual coatings can apply lubricant better for smoother drilling and are more durable and corrosion resistant. Sharp cutting edges provide neat and smooth cuts. Large spiral grooves facilitate the export of metal chips.
- Wide Applications: Drill bits produce holes in stainless steel, cast iron, A3 steel, carbon steel, aluminum alloy, copper, wood and plastic. Most suitable for drilling metals with a hardness less than HRC38, and cannot drill quenched metals, tiles, concrete, walls, stones.
- Tips: Use an appropriate lubricant to reduce friction and heat build-up. Controlling the speed is very important, recommended speed: 100-800rpm/min. The larger the diameter, the slower the speed required. If the hole is larger than 6mm, first drill a small hole with a 3.2mm-4mm drill bit, and then use a larger drill bit to enlarge the hole.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #9
uxcell Micro PCB Drill Bit Set, 1/8" Shank 0.8mm Solid Tungsten Carbide CNC Engraving Print Circuit Board Drill Bits Rotary Tool 10pcs
Asin: B09T37V8DZ | Model: a21122300ux0756 | PartNumber: a21122300ux0756
Sharp Cutting Edge: Sharp Cutting Edge Provides Smooth Cutting, Reduces Cutting Force, Prevents Drill Broken, And Improves The Drilling Accuracy. Spiral Chip Space Design For Fast And Clean Chip Removal. The Tool Set Can Work Quickly And Cleanly, No Glitches Or Scrap Left..
Tips: The Longer The Length Of The Tool Clamped By The Chuck, The Better. If The Clamping Length Is Shorter, You Need To Lower The Feed Rate And Cutting Speed To Reduce Vibration And Extend The Tool Life. Combined With The Material To Be Processed, Select An Appropriate Feed Rate And Cutting Speed..
Tungsten Carbide Tool: Long-Lasting Bits Are Made From Tungsten Carbide For Precise And Easy Experience. Carbide Can Run At Higher Speed Than High-Speed Steel. Carbide Material With Good Milling And Cutting Performance, Can Ensure High Work Efficiency..
Wide Applications: Suitable For Drilling Pcb, Acrylic, Plastics, Fiberglass, Wood, Aluminium, Soft Metals. Used On Pcb Drilling Machines, Engraving Machine, Cnc Lathes, Machining Center. Use Vertically And Take Good Control Of Your Cnc Speed..
Features
- PCB Drill Bit: Cutting edge diameter: 0.8mm / 0.031"; shank diameter: 3.175mm / 1/8"; overall length: 38mm / 1-1/2". High hardness, good toughness, wear resistance, high strength, resistance to bending.
- Wide Applications: Suitable for drilling PCB, acrylic, plastics, fiberglass, wood, aluminium, soft metals. Used on PCB drilling machines, engraving machine, CNC lathes, machining center. Use vertically and take good control of your CNC speed.
- Sharp Cutting Edge: Sharp cutting edge provides smooth cutting, reduces cutting force, prevents drill broken, and improves the drilling accuracy. Spiral chip space design for fast and clean chip removal. The tool set can work quickly and cleanly, no glitches or scrap left.
- Tungsten Carbide Tool: Long-lasting bits are made from tungsten carbide for precise and easy experience. Carbide can run at higher speed than high-speed steel. Carbide material with good milling and cutting performance, can ensure high work efficiency.
- Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life. Combined with the material to be processed, select an appropriate feed rate and cutting speed.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #10
uxcell 1.75mm Solid Carbide Drill Bits Straight Shank for Stainless Steel Alloy Hard Steel, Hardened to 50 HRC, 2 Pcs
Asin: B085NDXVPS | Model: a19120900ux0805 | PartNumber: a19120900ux0805
For Abrasive Materials: Designed For Drilling Abrasive Materials When Drilling Accuracy Must Be Maintained. Can Be Used In High Temperature Drilling Applications.
Please Note: Must Be Used With A Rigid Tool-Holding Systems. Fine Grinding Drill Obtain Accuracy And Fine Finish Than Other Substrates.
Solid Carbide Tool: Offering Long Tool Life And Faster Cutting Speeds Than Other Substrates, But Is More Brittle.
Applications: Widely Used On Cast Iron, Non-Ferrous Alloys, High Silicon Aluminum, Copper, Plastics, Hard Rubber Etc..
Features
- Specification: Diameter: 1.75mm / 0.07"; Full Length: 38mm / 1.5"; Flute Length: 17mm / 0.67"; Made of Solid Carbide (Tungsten Steel), Hardened to 50 HRC
- Applications: Widely Used on cast iron, non-ferrous alloys, high silicon aluminum, copper, plastics, hard rubber etc.
- For Abrasive Materials: Designed for drilling abrasive materials when drilling accuracy must be maintained. Can be used in high temperature drilling applications
- Solid Carbide Tool: Offering long tool life and faster cutting speeds than other substrates, but is more brittle
- Please Note: Must be used with a rigid tool-holding systems. Fine grinding drill obtain accuracy and fine finish than other substrates
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #11
uxcell 15mm Reduced Shank Cemented Carbide Twist Drill Bits for Hardened Steel Stainless Steel, 1/2 Inch Straight Shank
Asin: B09X9L2QVY | Model: a22021600ux0364 | PartNumber: a22021600ux0364
[Versatile Uses] -Cemented Carbide Drill Bit Can Clean, Accurate Holes In Sheet Metal, Steel, Copper, Brass, Aluminum, Plastic, Wood, Stainless Steel And Cast Iron..
[Use Note] - Please Use Low Speed When Drilling And Note The Temperature Of Carbide Tip Is Not Too High For Extending Drill Bit Life..
[Reduced Shank] - Reduced Shank Twist Drill Bit Can Work With A Electric Drill (Electric Drill Not Included)..
[Features] - Milled U-Flutes With Deep-Cut Spiral Deliver Fast Material Removal. Suitable For Drilling In Tough Metal, Including Abrasive Alloy And Hardened Steel..
Features
- [Cemented Carbide] - Twist drill bits are made of cemented carbide tip for easier drilling into any hard objects, long service life, it is more sharp and durable than others.
- [Features] - Milled U-flutes with deep-cut spiral deliver fast material removal. Suitable for drilling in tough metal, including abrasive alloy and hardened steel.
- [Versatile Uses] -Cemented carbide drill bit can clean, accurate holes in sheet metal, steel, copper, brass, aluminum, plastic, wood, stainless steel and cast iron.
- [Reduced Shank] - Reduced shank twist drill bit can work with a electric drill (electric drill not included).
- [Use Note] - Please use low speed when drilling and note the temperature of carbide tip is not too high for extending drill bit life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #12
uxcell Solid Carbide Drill Bits, 3.2mm C2/K20 Tungsten Carbide Jobber Drill Bits Straight Shank Drilling Tool for Stainless Steel Aluminum Iron Metal Plastic
Asin: B09XDZDW26 | Model: a22021800ux0577 | PartNumber: a22021800ux0577
Material: Constructed From Medium Grain C2/K20 Tungsten Carbide, The Drill Bit Has Good Toughness, High Hardness (Hra89) And Wear Resistance. With Good Milling And Cutting Performance, Can Ensure High Work Efficiency. Carbide Tool Offers Faster Cutting Speeds Than Other Substrates..
Tips: Used On Machining Centers, Cnc Lathes. The Longer The Length Of The Tool Clamped By The Chuck, The Better. If The Clamping Length Is Shorter, You Need To Lower The Feed Rate And Cutting Speed To Reduce Vibration And Extend The Tool Life..
Features: Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting And No Glitches. Suitable Lubricant Is Conducive To Cutting Or Cooling, Making Cutting Easier, Improving Smoothness And Dimensional Accuracy..
Wide Applications: Widely Used For Drilling Non-Ferrous Metal, Cast Iron, Stainless Steel, Aluminum, Copper, Alloy Steel, Plastic, Wood. Designed With The Base Substrate Without Any Additional Coatings, Suitable For Wide Ranges Of Applications..
Features
- Twist Drill Bits: Drilling Diameter: 3.2mm / 0.126"; Flute Length: 25mm / 0.98"; Overall Length: 43mm / 1.69"; Cutting Hardness (Max.): HRC45. Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches.
- Wide Applications: Widely used for drilling non-ferrous metal, cast iron, stainless steel, aluminum, copper, alloy steel, plastic, wood. Designed with the base substrate without any additional coatings, suitable for wide ranges of applications.
- Material: Constructed from medium grain C2/K20 tungsten carbide, the drill bit has good toughness, high hardness (HRA89) and wear resistance. With good milling and cutting performance, can ensure high work efficiency. Carbide tool offers faster cutting speeds than other substrates.
- Features: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy.
- Tips: Used on machining centers, CNC lathes. The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #13
uxcell Solid Carbide Drill Bits, 8mm C2/K20 Tungsten Carbide Jobber Drill Bits Straight Shank Drilling Tool for Stainless Steel Aluminum Iron Metal Plastic
Asin: B09WYP57BY | Model: a22021800ux0644 | PartNumber: a22021800ux0644
Material: Constructed From Medium Grain C2/K20 Tungsten Carbide, The Drill Bit Has Good Toughness, High Hardness (Hra89) And Wear Resistance. With Good Milling And Cutting Performance, Can Ensure High Work Efficiency. Carbide Tool Offers Faster Cutting Speeds Than Other Substrates..
Tips: Used On Machining Centers, Cnc Lathes. The Longer The Length Of The Tool Clamped By The Chuck, The Better. If The Clamping Length Is Shorter, You Need To Lower The Feed Rate And Cutting Speed To Reduce Vibration And Extend The Tool Life..
Features: Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting And No Glitches. Suitable Lubricant Is Conducive To Cutting Or Cooling, Making Cutting Easier, Improving Smoothness And Dimensional Accuracy..
Wide Applications: Widely Used For Drilling Non-Ferrous Metal, Cast Iron, Stainless Steel, Aluminum, Copper, Alloy Steel, Plastic, Wood. Designed With The Base Substrate Without Any Additional Coatings, Suitable For Wide Ranges Of Applications..
Features
- Twist Drill Bits: Drilling Diameter: 8mm / 0.315"; Flute Length: 35mm / 1.38"; Overall Length: 60mm / 2.36"; Cutting Hardness (Max.): HRC45. Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches.
- Wide Applications: Widely used for drilling non-ferrous metal, cast iron, stainless steel, aluminum, copper, alloy steel, plastic, wood. Designed with the base substrate without any additional coatings, suitable for wide ranges of applications.
- Material: Constructed from medium grain C2/K20 tungsten carbide, the drill bit has good toughness, high hardness (HRA89) and wear resistance. With good milling and cutting performance, can ensure high work efficiency. Carbide tool offers faster cutting speeds than other substrates.
- Features: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy.
- Tips: Used on machining centers, CNC lathes. The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #14
uxcell Solid Carbide Drill Bits, 5mm C2/K20 Tungsten Carbide Jobber Drill Bits Straight Shank Drilling Tool for Stainless Steel Aluminum Iron Metal Plastic
Asin: B09WYM1DWJ | Model: a22021800ux0613 | PartNumber: a22021800ux0613
Material: Constructed From Medium Grain C2/K20 Tungsten Carbide, The Drill Bit Has Good Toughness, High Hardness (Hra89) And Wear Resistance. With Good Milling And Cutting Performance, Can Ensure High Work Efficiency. Carbide Tool Offers Faster Cutting Speeds Than Other Substrates..
Tips: Used On Machining Centers, Cnc Lathes. The Longer The Length Of The Tool Clamped By The Chuck, The Better. If The Clamping Length Is Shorter, You Need To Lower The Feed Rate And Cutting Speed To Reduce Vibration And Extend The Tool Life..
Features: Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting And No Glitches. Suitable Lubricant Is Conducive To Cutting Or Cooling, Making Cutting Easier, Improving Smoothness And Dimensional Accuracy..
Wide Applications: Widely Used For Drilling Non-Ferrous Metal, Cast Iron, Stainless Steel, Aluminum, Copper, Alloy Steel, Plastic, Wood. Designed With The Base Substrate Without Any Additional Coatings, Suitable For Wide Ranges Of Applications..
Features
- Twist Drill Bits: Drilling Diameter: 5mm / 0.197"; Flute Length: 28mm / 1.1"; Overall Length: 50mm / 1.97"; Cutting Hardness (Max.): HRC45. Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches.
- Wide Applications: Widely used for drilling non-ferrous metal, cast iron, stainless steel, aluminum, copper, alloy steel, plastic, wood. Designed with the base substrate without any additional coatings, suitable for wide ranges of applications.
- Material: Constructed from medium grain C2/K20 tungsten carbide, the drill bit has good toughness, high hardness (HRA89) and wear resistance. With good milling and cutting performance, can ensure high work efficiency. Carbide tool offers faster cutting speeds than other substrates.
- Features: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy.
- Tips: Used on machining centers, CNC lathes. The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #15
uxcell PCB Drill Bits 0.5mm Tungsten Carbide Rotary Tool Jewelry CNC Engraving Print Circuit Board Micro Drill Bits 1/8 Inch Shank 1 Set (10 Pcs)
Asin: B07ZVSNLX8 | Model: a19091500ux0218 | PartNumber: a19091500ux0218
Spiral Flute Bits: Tip Spiral Flute Drill Bits With Sharper Cutting Edge, Reduce Cutting Force And Prevent Drill Broken, Improve The Drilling Accuracy.
Great Use: Great For Pc Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit For: Pcb Drilling Machines, Engraving Machine, Cnc And High Precision Special Drilling Equipment.
High Precision: With Sharp Cutting Edge, Milling Groove And Clean Surface, These Sets Of Tool Work Quickly And Cleanly, No Glitches Or Scrap Left.
Long Tool Life: With High Hardness, High Wear Resistance, High Strength, Resistance To Bending, Anti-Impairment. Made From Tungsten Carbide For Precise, Easy Experience.
Features
- Specification: Cutting edge diameter (CED): 0.5mm; cutting edge length: 7mm; shank diameter: 3mm / 1/8" (approx.) overall length: 38mm / 1-1/2" (approx.)
- Long Tool Life: With high hardness, high wear resistance, high strength, resistance to bending, anti-impairment. Made from Tungsten Carbide for precise, easy experience
- Spiral Flute Bits: Tip spiral flute drill bits with sharper cutting edge, reduce cutting force and prevent drill broken, improve the drilling accuracy
- High Precision: With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left
- Great Use: Great for PC Boards, Plastics, Fiberglass, Wood, Soft Metals. Fit for: PCB drilling machines, engraving machine, CNC and high precision special drilling equipment
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #16
uxcell Solid Carbide Drill Bits, 1.6mm C2/K20 Tungsten Carbide Jobber Drill Bits Straight Shank Drilling Tool for Stainless Steel Aluminum Iron Metal Plastic 4pcs
Asin: B09XDZMLYP | Model: a22021800ux0533 | PartNumber: a22021800ux0533
Material: Constructed From Medium Grain C2/K20 Tungsten Carbide, The Drill Bit Has Good Toughness, High Hardness (Hra89) And Wear Resistance. With Good Milling And Cutting Performance, Can Ensure High Work Efficiency. Carbide Tool Offers Faster Cutting Speeds Than Other Substrates..
Tips: Used On Machining Centers, Cnc Lathes. The Longer The Length Of The Tool Clamped By The Chuck, The Better. If The Clamping Length Is Shorter, You Need To Lower The Feed Rate And Cutting Speed To Reduce Vibration And Extend The Tool Life..
Features: Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting And No Glitches. Suitable Lubricant Is Conducive To Cutting Or Cooling, Making Cutting Easier, Improving Smoothness And Dimensional Accuracy..
Wide Applications: Widely Used For Drilling Non-Ferrous Metal, Cast Iron, Stainless Steel, Aluminum, Copper, Alloy Steel, Plastic, Wood. Designed With The Base Substrate Without Any Additional Coatings, Suitable For Wide Ranges Of Applications..
Features
- Twist Drill Bits: Drilling Diameter: 1.6mm / 0.063"; Flute Length: 20mm / 0.79"; Overall Length: 40mm / 1.57"; Cutting Hardness (Max.): HRC45. Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches.
- Wide Applications: Widely used for drilling non-ferrous metal, cast iron, stainless steel, aluminum, copper, alloy steel, plastic, wood. Designed with the base substrate without any additional coatings, suitable for wide ranges of applications.
- Material: Constructed from medium grain C2/K20 tungsten carbide, the drill bit has good toughness, high hardness (HRA89) and wear resistance. With good milling and cutting performance, can ensure high work efficiency. Carbide tool offers faster cutting speeds than other substrates.
- Features: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy.
- Tips: Used on machining centers, CNC lathes. The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #17
uxcell Solid Carbide Twist Drill Bits 3mm, Metric Left Hand Spiral Flutes Straight Shank Tungsten Steel Drilling Tool for Stainless Steel Alloy Metal, 2pcs
Asin: B09M82ZQ95 | Model: a21092400ux0231 | PartNumber: a21092400ux0231
Carbide Tool: Constructed From Fine Particle Yg6x Carbide (Tungsten Steel), The Drill Bit Is Hardened Up To 91Hra, Wear Resistance, Corrosion Resistance, Heat Resistance, And Good Bending Strength..
Tips: Used On Machining Centers, Cnc Lathes. Adapt To Several Kinds Of Cooling Conditions, Such As Oil Mist, Water, Oil, Air Cooling. It Is Not Recommended To Be Used With A Hand Drill. Hand Drill Is Easy To Shake, Poor Stability, Which Makes Drill Bit Easy To Twist Off..
Features: Carbide Tool Offers Long Tool Life And Faster Cutting Speeds Than Other Substrates, And It Is Higher Hardness But Is More Brittle. Carbide Material With Good Cutting Performance, Can Ensure High Work Efficiency..
Wide Applications: Used For Semi-Finish And Finish Cutting Of Stainless Steel, Alloy Steel, Cast Iron, Titanium Alloy, Non-Ferrous Metal, Copper, Plastics. Designed For Drilling Abrasive Materials When Drilling Accuracy Must Be Maintained..
Features
- Twist Drill Bits: Drilling Diameter: 3mm / 0.118"; Flute Length: 25mm / 0.98";Overall Length: 50mm / 1.97". Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches.
- Wide Applications: Used for semi-finish and finish cutting of stainless steel, alloy steel, cast iron, titanium alloy, non-ferrous metal, copper, plastics. Designed for drilling abrasive materials when drilling accuracy must be maintained.
- Carbide Tool: Constructed from fine particle YG6X carbide (tungsten steel), the drill bit is hardened up to 91HRA, wear resistance, corrosion resistance, heat resistance, and good bending strength.
- Features: Carbide tool offers long tool life and faster cutting speeds than other substrates, and it is higher hardness but is more brittle. Carbide material with good cutting performance, can ensure high work efficiency.
- Tips: Used on machining centers, CNC lathes. Adapt to several kinds of cooling conditions, such as oil mist, water, oil, air cooling. It is not recommended to be used with a hand drill. Hand drill is easy to shake, poor stability, which makes drill bit easy to twist off.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #18
uxcell Solid Carbide Twist Drill Bits 2.5mm, Metric Left Hand Spiral Flutes Straight Shank Tungsten Steel Drilling Tool for Stainless Steel Alloy Metal, 2pcs
Asin: B09M831NDF | Model: a21092400ux0227 | PartNumber: a21092400ux0227
Carbide Tool: Constructed From Fine Particle Yg6x Carbide (Tungsten Steel), The Drill Bit Is Hardened Up To 91Hra, Wear Resistance, Corrosion Resistance, Heat Resistance, And Good Bending Strength..
Tips: Used On Machining Centers, Cnc Lathes. Adapt To Several Kinds Of Cooling Conditions, Such As Oil Mist, Water, Oil, Air Cooling. It Is Not Recommended To Be Used With A Hand Drill. Hand Drill Is Easy To Shake, Poor Stability, Which Makes Drill Bit Easy To Twist Off..
Features: Carbide Tool Offers Long Tool Life And Faster Cutting Speeds Than Other Substrates, And It Is Higher Hardness But Is More Brittle. Carbide Material With Good Cutting Performance, Can Ensure High Work Efficiency..
Wide Applications: Used For Semi-Finish And Finish Cutting Of Stainless Steel, Alloy Steel, Cast Iron, Titanium Alloy, Non-Ferrous Metal, Copper, Plastics. Designed For Drilling Abrasive Materials When Drilling Accuracy Must Be Maintained..
Features
- Twist Drill Bits: Drilling Diameter: 2.5mm / 0.098"; Flute Length: 25mm / 0.98";Overall Length: 50mm / 1.97". Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches.
- Wide Applications: Used for semi-finish and finish cutting of stainless steel, alloy steel, cast iron, titanium alloy, non-ferrous metal, copper, plastics. Designed for drilling abrasive materials when drilling accuracy must be maintained.
- Carbide Tool: Constructed from fine particle YG6X carbide (tungsten steel), the drill bit is hardened up to 91HRA, wear resistance, corrosion resistance, heat resistance, and good bending strength.
- Features: Carbide tool offers long tool life and faster cutting speeds than other substrates, and it is higher hardness but is more brittle. Carbide material with good cutting performance, can ensure high work efficiency.
- Tips: Used on machining centers, CNC lathes. Adapt to several kinds of cooling conditions, such as oil mist, water, oil, air cooling. It is not recommended to be used with a hand drill. Hand drill is easy to shake, poor stability, which makes drill bit easy to twist off.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #19
uxcell Solid Carbide Drill Bits, 6mm C2/K20 Tungsten Carbide Jobber Drill Bits Straight Shank Drilling Tool for Stainless Steel Aluminum Iron Metal Plastic
Asin: B09WYPDQG6 | Model: a22021800ux0624 | PartNumber: a22021800ux0624
Material: Constructed From Medium Grain C2/K20 Tungsten Carbide, The Drill Bit Has Good Toughness, High Hardness (Hra89) And Wear Resistance. With Good Milling And Cutting Performance, Can Ensure High Work Efficiency. Carbide Tool Offers Faster Cutting Speeds Than Other Substrates..
Tips: Used On Machining Centers, Cnc Lathes. The Longer The Length Of The Tool Clamped By The Chuck, The Better. If The Clamping Length Is Shorter, You Need To Lower The Feed Rate And Cutting Speed To Reduce Vibration And Extend The Tool Life..
Features: Spiral Chip Space Design For Fast And Clean Chip Removal. Sharp Cutting Edge Provides Smooth Cutting And No Glitches. Suitable Lubricant Is Conducive To Cutting Or Cooling, Making Cutting Easier, Improving Smoothness And Dimensional Accuracy..
Wide Applications: Widely Used For Drilling Non-Ferrous Metal, Cast Iron, Stainless Steel, Aluminum, Copper, Alloy Steel, Plastic, Wood. Designed With The Base Substrate Without Any Additional Coatings, Suitable For Wide Ranges Of Applications..
Features
- Twist Drill Bits: Drilling Diameter: 6mm / 0.236"; Flute Length: 30mm / 1.18"; Overall Length: 55mm / 2.17"; Cutting Hardness (Max.): HRC45. Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches.
- Wide Applications: Widely used for drilling non-ferrous metal, cast iron, stainless steel, aluminum, copper, alloy steel, plastic, wood. Designed with the base substrate without any additional coatings, suitable for wide ranges of applications.
- Material: Constructed from medium grain C2/K20 tungsten carbide, the drill bit has good toughness, high hardness (HRA89) and wear resistance. With good milling and cutting performance, can ensure high work efficiency. Carbide tool offers faster cutting speeds than other substrates.
- Features: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy.
- Tips: Used on machining centers, CNC lathes. The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #20
uxcell 0.8mm Diamond Twist Drill Bits High-Speed Steel Drill Bit for Glass Sea Shells Tiles Drilling Hole 10Pcs
Asin: B07RBJSM1T
[Applicable Machine] - Widely Used In Rotary Tool Such As Hand Drills, Drill Press, Flex Shafts, Bench Drill And Hanging Mill..
[Notice] - When Drilling, It Is Necessary To Add Cutting Fluid In Time To Lubricate And Cool Down, Which Can Get A Better Drilling Hole Wall, Extends The Service Life And Drilling Accuracy..
[Application] - Suitable For Drilling Small Holes On Glass, Metal, Sea Shells, Jade, Pearls, Marble, Stones, Drywall And Son On. Due To The Different Hardness Of The Material, The Effect Is Also Different..
[Material] - Diamond Coated High Speed Steel(Hss) Is Made By Spiral Technology, Has Both Toughness And Hardness, Is Not Easy To Break. The Drill Bit Is Sharp, And Is Easy For Chip Removal..
Features
- [SIZE] - 0.8mm diameter, 11mm length twist drill bit with 0.6mm shank.
- [MATERIAL] - Diamond coated high speed steel(HSS) is made by spiral technology, has both toughness and hardness, is not easy to break. The drill bit is sharp, and is easy for chip removal.
- [APPLICABLE MACHINE] - Widely used in rotary tool such as hand drills, drill press, flex shafts, bench drill and hanging mill.
- [APPLICATION] - Suitable for drilling small holes on glass, metal, sea shells, jade, pearls, marble, stones, drywall and son on. Due to the different hardness of the material, the effect is also different.
- [NOTICE] - When drilling, it is necessary to add cutting fluid in time to lubricate and cool down, which can get a better drilling hole wall, extends the service life and drilling accuracy.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon
Looking For Something Else?
Search