Topping PA3S Power Amplifier MA120702 x 2 Class D Fully Balanced Single Ended AMP 80W x 2 RCA TRS Stereo Home Audio Amplifier (Black)
Asin: B09LCTYHKQ | Model: TOPPING PA3s | PartNumber: TOPPING PA3s
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Balanced + Single -Ended Inputs - Pa3s Provides Trs Balanced Input And Rca Single -End- Ed Input. The Use Of Balanced Input Eliminates Potential Ground Loop Problems Giving The Pristinely Clean Audio Without Any Hum.Two Inputs Are Selectable Using Front Panel Button. P A3s Will Remember The Input Selected When It Was Turned Off..
Wider Use - With The Help Of A Dac, The Function Is Expanded Toa Greater Extent Pa3s Can Be Used With A Dac To Expand The Categories Of Digital Inputs; If Used With A Dac+Hpa, More Comprehen- Sive Functions Can Be Achieved..
"Comfort Zone" With Lowest Distortion - The Lowest Thd+N Of Pa3s Is In The Range Of 10-20W Output, Which Happens To Be The Power Range Commonly Used For Listening To Music. Everything Is Just In The Rightcondition.
High Output Power - Pa3s Could Output 80W X2 At 4Ohm Load, 10% Thd+N. In Higher Standard Of Thd+N Of 1%, Output Power Will Be 65W X2 At 4Ohm Load. The Output Power Is Enough To Drive Any Bookshelf Speakers And Even Some Floor Speakers.
Features
- 2xMA12070 Fully balanced Class D amplifier - Each channel of PA3s uses one MA12070 Class D power amplifier chip. This allows separation in layout improving performance and reducing crosstalk. The power is shared across two chips, the heat dissipation is also halved for each chip, improving reliability and extending the lifespan of the product
- High output power - PA3s could output 80W x2 at 4ohm load, 10% THD+N. In higher standard of THD+N of 1%, output power will be 65W x2 at 4ohm load. The output power is enough to drive any bookshelf speakers and even some floor speakers
- Balanced + Single -ended inputs - PA3s provides TRs balanced input and RCA single -end- ed input. The use of balanced input eliminates potential ground loop problems giving the pristinely clean audio without any hum.Two inputs are selectable using front panel button. P A3s will remember the input selected when it was turned off.
- Comfort zone with lowest distortion - The lowest THD+N of PA3s is in the range of 10-20W output, which happens to be the power range commonly used for listening to music. Everything is just in the rightcondition
- Wider Use - With the help of a DAC, the function is expanded toa greater extent PA3s can be used with a DAC to expand the categories of digital inputs; if used with a DAC+HPA, more comprehen- sive functions can be achieved.
- See more on Amazon...
Brand: KGUSS | Manufacturer: KGUSS
Warranty: One year free repair
See On Amazon Similar To Topping PA3S Power Amplifier MA120702
#1
Topping DX3 Pro+ ES9038Q2M Bluetooth 5.0 LDAC Audio Decoder DSD512 DAC AMP NFCA Headphone Amplifier Pre Amplifier (Black)
Asin: B09HBS8SLJ | Model: DX3 Pro+ | PartNumber: DX3 Pro+
Pre-Amplifier Function ：Adapt To Different Usage Scenarios, Dx3 Pro+ Has 4 Output Modes: Headphone Amp, Headphone Amp+ Line Out, Dac, And Pre Amplifier..
Bluetooth Headphone Amp / Bluetooth Dac Application： Connect The Bluetooth Of The Phone, Tablet Or Notebook To Dx3 Pro+, And Connect The Power Amplifier, Active Speakers Or Headphones To The Dx3 Pro+'S Output, Then Dx3 Pro+ Becomes Your Bluetooth Headphone Amp / Bluetooth Dac. If Your Device Supports Ldac Transmission, You Will Get Even Better Experience..
Pa3s Is The Best Power Amplifier For Dx3 Pro+： Pa3s Has Rca+Trs Balanced Inputs. When Used With Dx3 Pro+, The Trs Balanced Input Can Be Used To Input Other Audio Sources. The Output Power Of 80W X 2@4Ω, 10%Thd+N, 65W X 2@4Ω, 1%Thd+N Can Be Adapted To Most Situations Where Speakers Are Used..
Nfca Circuit ：The New Dx3 Pro+ Has The Nfca Circuit Optimized For This Unit, Giving The Ultra Low Noise And Distortion. It Pairs With High Sensitivity Iems And Power Hungry High Impedance Headphones Nicely..
Features
- Bluetooth 5.0 LDAC transmission DX3Pro+ has the certification of Hi-Res Audio Wireless and LDAC. It uses newest QCC5125 chipset to support LDAC/AAC/SBC/APTX/APTX LL/APTX HD protocol. To get even better sound quality from Bluetooth, we abandon the built-in DAC of QCC5125 and connect its digital signal to ES9038Q2M to decode.
- NFCA circuit The new DX3 Pro+ has the NFCA circuit optimized for this unit, giving the ultra low noise and distortion. It pairs with high sensitivity IEMs and power hungry high impedance headphones nicely.
- Pre-amplifier function Adapt to different usage scenarios, DX3 Pro+ has 4 output modes: Headphone Amp, Headphone Amp+ Line out, DAC, and Pre amplifier.
- PA3s is the best power amplifier for DX3 Pro+ PA3s has RCA+TRS balanced inputs. When used with DX3 Pro+, the TRS balanced input can be used to input other audio sources. The output power of 80W x 2@4 , 10%THD+N, 65W X 2@4 , 1%THD+N can be adapted to most situations where speakers are used.
- Bluetooth headphone amp / Bluetooth DAC application Connect the Bluetooth of the phone, tablet or notebook to DX3 Pro+, and connect the power amplifier, active speakers or headphones to the DX3 Pro+'s output, then DX3 Pro+ becomes your Bluetooth Headphone amp / Bluetooth DAC. If your device supports LDAC transmission, you will get even better experience.
- See more on Amazon...
Brand: Fanmusic | Manufacturer: TOPPING
See On Amazon #2
Topping L30 II NFCA Headphone Amplifier Hi-Res Audio 560mW 2 L30II AMP (Black)
Asin: B0B7JHR1RC | Model: L30 II | PartNumber: L30 II
Low Distortion While Outputting High Power: The L30 Ii Can Maintain Ultra-Low Distortion Output Under High Power Load. Under 32 Ohm Load And 2500Mw Output, The Thd+N Is Lower Than 0.00008%; Under 300 Ohm Load And 300Mw Output, The Thd+N Is Lower Than 0.00007%..
Three Gain Settings To Suit Different Needs: L30 Ii Has Three Gain Options: -14Db, 0Db, 16.5Db. Improved Gain Settings Can Cover A Wider Range Of Needs To Meet The Needs Of Different Headphones From Low-Sensitivity Full-Sized Over-Ears To High-Sensitity Iems. With The Help Of Extremely Low Noise 0.3Uv, Even Iems Will Not Hear Any Background Noise..
Compatible With Almost All Kinds Of Headphones: L30 Ii's Output Has High Output Voltage, High Current, Low Output Impedance, So No Headphones That Can't Be Dealt With. High Output Voltage Can Easily Drive High Impedance Headphones; High Output Current Allows Low- Sensitivity Headphones To Obtain Enough Power; The Low Output Impedance Will Not Bring Unnecessary Effect On Fr When Driving Low-Impedance Headphones.， Different Headphones Can Be Easily Driven By The L30 Ii..
Features
- Improved NFCA: L30 II uses redesigned NFCA (Nested Feedback Composite Amplifier) module. It provides 2x output power at 3002 load compared to L30. The new circuit has 0.3uV ultra low noise and 144dB dynamic range as well as 0.00006% THD+N.
- Compatible with almost all kinds of headphones: L30 II's output has high output voltage, high current, low output impedance, so no headphones that can't be dealt with. High output voltage can easily drive high impedance headphones; High output current allows low- sensitivity headphones to obtain enough power; The low output impedance will not bring unnecessary effect on FR when driving low-impedance headphones. Different headphones can be easily driven by the L30 II.
- Low distortion while outputting high power: The L30 II can maintain ultra-low distortion output under high power load. Under 32 ohm load and 2500mW output, the THD+N is lower than 0.00008%; under 300 ohm load and 300mW output, the THD+N is lower than 0.00007%.
- Three gain settings to suit different needs: L30 II has three gain options: -14dB, 0dB, 16.5dB. Improved gain settings can cover a wider range of needs to meet the needs of different headphones from low-sensitivity full-sized over-ears to high-sensitity IEMs. With the help of extremely low noise 0.3uV, even IEMs will not hear any background noise.
- See more on Amazon...
Brand: TOPPING | Manufacturer: L30 II
Warranty: 1 year warranty
See On Amazon #3
Topping E30II lite DAC Preamp - AK4493S Hi-Res XMOS XU208 DAC 32Bit/768kHz DSD512 DSD Direct Mode for USB/Coax/Opt Inputs RCA HiFi Stereo Digital Audio Decoder(Black)
Asin: B0C9GLHRT7 | Model: E30II lite-Black | PartNumber: E30II lite-Black
👍Preamp Mode▶️ The E30 Ii Lite Is Equipped With A Built-In Volume Control Function That Makes It Easy To Adjust The Volume From -99Db To 0Db Using The Remote Control. The E30 Ii Lite Can Also Be Connected Directly To An Amplifier, Pure Power Amplifiers Or Active Speakers, Controlling The Volume Level Through The E30 Ii Lite, Allowing You To Enjoy Music More Comfortably..
👍Good Partner ——L30 Ii Headphone Amplifier ▶️ E30 Ii Lite And L30 Ii Have The Same Design Concept, Both Detailed Workmanship And Sound Quality Performance Show The High Quality Of The Product. The L30ii Headphone Amplifier Can Drive Most Of The Headphones On The Market And Match Perfectly. Whether You Are A Music Enthusiast Or An Everyday User, Its Excellent Sound Quality Can Meet Your Needs..
👍Coaxial And Optical▶️ The Optical And Coaxial Input Of E30 Ii Lite Supports Up To 24Bit/192Khz, Which Is Suitable For Digital Turntables, Cd Players, Set-Top Boxes And Game Consoles, So That Traditional Equipment Can Also Give A New Sound..
👍Professional Performance, Instant Listening▶️ E30 Ii Lite Supports Playback Of Audio Streams Up To Dsd512 And Pcm768khz. E30 Ii Lite Is Widely Compatible With Operating Systems Including Windows 10, Windows 11, Mac, Linux And Ios/Android Systems. Simply Connect The Audio Source And Use E30 Ii Lite Immediately. Only The Driver Installation And Setup Is Required To Use Asio Applications On Windows Systems*..
Features
- Supports high-resolution audio The E30 II lite uses AKM's VELVET Sound technology's sub-flagship AK4493S chip. It has won wide acclaim from audio enthusiasts for its outstanding performance and top-notch sound quality. With the AK4493S, the E30 II lite has a dynamic range of up to 121dB and THD <0.0004%. This not only ensures the high accuracy of audio signal restoration but also gives you a live music experience as if you were there.
- Professional performance, instant listening E30 II lite supports playback of audio streams up to DSD512 and PCM768kHz. E30 II lite is widely compatible with operating systems including Windows 10, Windows 11, MAC, Linux and iOS/Android systems. Simply connect the audio source and use E30 II lite immediately. Only the driver installation and setup is required to use ASIO applications on Windows systems*.
- Preamp Mode The E30 II lite is equipped with a built-in volume control function that makes it easy to adjust the volume from -99dB to 0dB using the remote control. The E30 II lite can also be connected directly to an amplifier, pure power amplifiers or active speakers, controlling the volume level through the E30 II lite, allowing you to enjoy music more comfortably.
- Coaxial and Optical The optical and coaxial input of E30 II lite supports up to 24bit/192kHz, which is suitable for digital turntables, CD players, set-top boxes and game consoles, so that traditional equipment can also give a new sound.
- Good partner L30 II headphone amplifier E30 II lite and L30 II have the same design concept, both detailed workmanship and sound quality performance show the high quality of the product. The L30II headphone amplifier can drive most of the headphones on the market and match perfectly. Whether you are a music enthusiast or an everyday user, its excellent sound quality can meet your needs.
- See more on Amazon...
Brand: KGUSS | Manufacturer: TOPPING
See On Amazon #4
Topping E30 II DAC Preamp Audio Decoder- 2xAK4493S Hi-Res XMOS XU208 DAC 32Bit/768kHz DSD512 DSD Direct Mode for USB/Coax/Opt Inputs RCA HiFi Stereo Digital Audio Decoder(Black)
Asin: B0B7LBCLM5
👍 5V Power Supply,Anytime And Anywhere ▶️ E30 Ii Uses Dc5v For Power Supply, Which Can Easily Access Almost Everywhere. You Can Power It Up By Usb Port Of Pc, Mobile Phone Charger Or Even A Power Bank. The Built-In Protection Circuit Will Protect The E30 Ii And Prompt On The Screen After Connecting To The Wrong Power Supply..
👍 Pure Dac & Dac+Preamp Application ▶️ E30 Ii Is Able To Fix To Maxmum Output Level So That It Can Be Worked As A Pure Dac. E30 Ii Has Built-In Volume Control Function That Can Adjust The Volume From -99Db To 0Db By Using The Remote Control, So You Are Able To Directly Connect E30 Ii To Power Amplifier Or Active Speakers, And Control The Volume Of E30 Ii Through Remote Control..
👍 Discrete Lnrd ▶️ How To Solve The Noise Problem Of 5V Power Supply? The E30 Ii's Answer Is The Discrete Lnrd Circuit (Low Noise Reference Driver). The Discrete Lnrd Circuit Filters Out The Noise Of Various 5V Power Input And Provides Stable Power Supply Of Ultra-Low Noise Reference Level For E30 Ii. With This Technology, The Noise Floor Of E30 Ii Is Lower Than 1 .5Uv..
👍 Coaxial And Optical Also Has Good Performance ▶️ The Optical And Coaxial Input Of E30 Ii Supports Up To 24Bit192khz Audio, Which Is Suitable For Digital Turntables, Disk Players, Set-Top Boxes, And Game Consoles, So That Traditional Equipment Can Also Give A New Sound. The Digital Processing Module Provides Better Compatibility Than The E30..
Features
- Supports high-resolution audio TOPPING E30 II uses two sub-flagship AK4493S chips of AKM's VELVET Sound technology. AK4493S is an upgraded version of the previous AK4493. Two AK4493S in parallel can achieve better performance and reduction ability than a single chip.
- Coaxial and Optical also has good performance The optical and coaxial input of E30 II supports up to 24bit192kHz audio, which is suitable for digital turntables, disk players, set-top boxes, and game consoles, so that traditional equipment can also give a new sound. The Digital Processing module provides better compatibility than the E30.
- 5V power supply,anytime and anywhere E30 II uses DC5V for power supply, which can easily access almost everywhere. You can power it up by USB port of PC, mobile phone charger or even a power bank. The built-in protection circuit will protect the E30 II and prompt on the screen after connecting to the wrong power supply.
- Discrete LNRD How to solve the noise problem of 5V power supply? The E30 II's answer is the Discrete LNRD circuit (low noise reference driver). The Discrete LNRD circuit filters out the noise of various 5V power input and provides stable power supply of ultra-low noise reference level for E30 II. With this technology, the noise floor of E30 II is lower than 1 .5uV.
- Pure DAC & DAC+Preamp application E30 II is able to fix to maxmum output level so that it can be worked as a pure DAC. E30 II has built-in volume control function that can adjust the volume from -99dB to 0dB by using the remote control, so you are able to directly connect E30 II to power amplifier or active speakers, and control the volume of E30 II through remote control.
- See more on Amazon...
Brand: KGUSS | Manufacturer: TOPPING
Warranty: One year free repair
See On Amazon #5
Topping D50 III DAC Preamplifier - LDAC Bluetooth 5.1 Dual ES9039Q2M D/A Chips Supports DSD512 PCM768kHz,PEQ Adjustment and Remote Control (Black)
Asin: B0CXTCCF9H | Model: D50 III | PartNumber: D50 III
👍 Plug And Play ▶️ D50 Iii Has A Wide Range Of Compatibility And Applies To Various Os Such As Windows 10, Windows 11, Mac, Linux And Ios/Android. Only For Windows Asio Applications, You Need To Install The Driver And Set It Up. The Usb Hardware Is Based On Xmos Xu316 Andthesycon Driver (Drivers Only For Windows, Other Os Needn't Driver). In Addition, The D50 Iii Supports Up To Pcm768khz/32Bit And Dsd512..
👍 Preamplifier Function - Desktop Speaker Companion ▶️ In Addition To The Dac Mode, The D50 Iii Also Has A "Preamp" Mode. In Preamp Mode, You Can Adjust The Volume At D50 Iii, Maximizing Ease Of Use With Active Speakers Or Pure Power Amplifiers..
👍 Perfect Partner—A50 Iii ▶️ The D50 Iii And A50 Iii Have The Same Design Language. This Combination Has Unique Metallic Aesthetics No Matter How It's Placed. And They Meet The Needs Of Most Headphones And Active Speakers. The A50 Iii Can Also Be Switched On And Off With The D50 Iii Via 12V Trigger..
👍 Ten-Band Peq Adjustment ▶️ We Develop A Brand New Peq Adjustment*That Supports Ten Customizable Frequency Bands. Topping's Brand New Peq Algorithm And Desktop Software Allow You To Fine-Tune The Frequency, Gain, And Bandwidth Of Each Peq Band. The Software Supports The Import Of Target And Original Curves As Well As The Compensation Of Curves Using Target Curves. It Can Also Save Multiple Profiles For Easy Switching.*The Peq Function Supports Up To Pcm 192Khz/32Bit. This Function Is Supported Only For Usb Input..
👍 Choose Your Output Mode At Will ▶️ The D50 Iii Has Not Only Rca Output, But Also Trs Balanced Output, Which Are Widely Used In The Professional Field. In Addition To The Versatile Trs 4V And Rca 2V Outputs, The D50 Iii Adds Trs 5V And Rca 2.5V. Adapt More Devices When Selecting Trs 4V And Rca 2V. Take Performance To The Next Level When Selecting Trs 5V And Rca 2.5V..
👍 Dual Type-C Interface,Fast And Stable ▶️ Use Type-C For Signal Transmission And Power. It Is Recommended To Add An Auxiliary Power Supply For Better Performance When The D50 Iii Is Often Fixed On A Desktop Or Connected To A Cell Phone For Use..
👍 Ldac Wireless Available ▶️ D50 Iii Is Equipped With Qcc5125 And Bluetooth 5.1. It Is Compatible With Ldac/Aptx-Adaptive/Aptx-Hd/Aac/Sbc, Supporting Up To 96Khz/24Bit. So That High-Quality Audio Can Be Transmitted Wirelessly To Obtain Music Experience Beyond Cd Level..
Features
- TOPPING D50 III - 3rd Generation Upgraded Version The D50 III uses 2x ES9039Q2M, one for the left channel and another for the right channel,which delivers higher SNR(132dB), higher dynamic range(132dB), and lower distortion(<1.3uVrms) than the D50s. A brand new I/V conversion circuit is designed for better audio reproduction. The D50 III's ability to restore music has reached a new level with its details perfectly displayed.
- LDAC wireless available D50 III is equipped with QCC5125 and Bluetooth 5.1. It is compatible with LDAC/aptX-Adaptive/aptX-HD/AAC/SBC, supporting up to 96kHz/24bit. So that high-quality audio can be transmitted wirelessly to obtain music experience beyond CD level.
- Plug and play D50 III has a wide range of compatibility and applies to various OS such as Windows 10, Windows 11, MAC, Linux and iOS/Android. Only for Windows ASIO applications, you need to install the driver and set it up. The USB hardware is based on XMOS XU316 andThesycon driver (Drivers only for Windows, other OS needn't driver). In addition, the D50 III supports up to PCM768kHz/32bit and DSD512.
- Dual Type-C interface,Fast and stable Use Type-C for signal transmission and power. It is recommended to add an auxiliary power supply for better performance when the D50 III is often fixed on a desktop or connected to a cell phone for use.
- Ten-band PEQ adjustment We develop a brand new PEQ adjustment*that supports ten customizable frequency bands. Topping's brand new PEQ algorithm and desktop software allow you to fine-tune the frequency, gain, and bandwidth of each PEQ band. The software supports the import of target and original curves as well as the compensation of curves using target curves. It can also save multiple profiles for easy switching.*The PEQ function supports up to PCM 192kHz/32bit. This function is supported only for USB input.
- Choose your output mode at will The D50 III has not only RCA output, but also TRS balanced output, which are widely used in the professional field. In addition to the versatile TRS 4V and RCA 2V outputs, the D50 III adds TRS 5V and RCA 2.5V. Adapt more devices when selecting TRS 4V and RCA 2V. Take performance to the next level when selecting TRS 5V and RCA 2.5V.
- Preamplifier function - Desktop speaker companion In addition to the DAC mode, the D50 III also has a preamp mode. In preamp mode, you can adjust the volume at D50 III, maximizing ease of use with active speakers or pure power amplifiers.
- Perfect partner A50 III The D50 III and A50 III have the same design language. This combination has unique metallic aesthetics no matter how it's placed. And they meet the needs of most headphones and active speakers. The A50 III can also be switched on and off with the D50 III via 12V Trigger.
- See more on Amazon...
Brand: KGUSS | Manufacturer: TOPPING
Warranty: 1 YEAR WARRANTY
See On Amazon #6
Topping D10s Mini USB DAC CSS XMOS XU208 ES9038Q2M OPA2134 Audio Amplifier Decoder Black
Asin: B08F54TT79 | Model: TOPPING D10s | PartNumber: TOPPING D10s | Ean: 0708200855863 | UPC: 708200855863
👍 Automatic Power On/Off ▶️ Although The Usb Port Support Power After Pc Has Shutdown,D10s Still Will Synchronously Power On/Off With Pc.
👍 Multiple Applications ▶️ ①Connect Topping D10s To Your Active Speakers.D10s Provide Not Only Dsd And Higher-Specification Pcm Compatibility But Also A Better Sound Quality Than Your Computer's Built-In Sound Card Or A Regular Dac;②You Can Connect D10s's Line Out To Your Amplifier/Headphone Amplifier's Input To Make D10s One Part Of Your Hifi System；③You Also Can Connect D10s's Coaxial/Optical Output To Your Dac, Then D10s Serve As A Usb Interface.
👍 Replaceable Op ▶️ It Has Op Amp Socket,Diyer Could Change The Op Amp To Get Different Sound.Notice:D10's Electrical Parameters Will Change If Use Other Op.
👍 Xmos Xu208 And Customized Driver ▶️ Toppping D10s Dac Use Xmos Xu208 For Usb Interface And Use Customized Driver Which From Thesycon For Better Compatibility With High Resolution Audio File Especially Dsd Native.And Use Ess Es9038q2m To Make Thd+N As Low As 0.0002%@1Khz.
Features
- Up to DSD256 and PCM384 TOPPING D10s USB DAC is compatible with 16-32bit/44.1-384kHz and DSD64 - DSD256(support both Dop and Native) If you need a DSD configuration guide, please contact the seller HIFI COLLEGE.
- XMOS XU208 and Customized Driver TOPPPING D10s DAC use XMOS XU208 for USB interface and use customized driver which from Thesycon for better compatibility with high resolution audio file especially DSD native.And use ESS ES9038Q2M to make THD+N as low as 0.0002%@1kHz
- Automatic Power On/Off Although the USB port support power after PC has shutdown,D10s still will synchronously power on/off with PC
- Replaceable OP It has OP amp socket,DIYer could change the OP amp to get different sound.Notice:D10's electrical parameters will change if use other OP
- Multiple Applications Connect TOPPING D10s to your active speakers.D10s Provide not only DSD and higher-specification PCM compatibility but also a better sound quality than your computer's built-in sound card or a regular DAC; You can connect D10s's line out to your amplifier/headphone amplifier's input to make D10s one part of your HIFI system You also can connect D10s's coaxial/optical output to your DAC, then D10s serve as a USB interface
- See more on Amazon...
Brand: KGUSS | Manufacturer: KGUSS
Weight: 0.99 pounds
Warranty: 30 days return policy. One year free repair period or more.
See On Amazon #7
Topping D90 III Sabre MQA Full Balance HiFi DAC Bluetooth 5.1 ES9039SPROx2 DSD512 PCM32bit/768kHz USB/Coax/Opt/AES/IIS Desktop Audio Preamp (Black)
Asin: B0CQJVDTRH | Model: TOPPING D90 III SABRE | PartNumber: TOPPING D90 III SABRE
Brand New I/V Conversion - A Brand New I/V Conversion Circuit Is Designed For Better Quality Audio Reproduction. The New Circuit Design Provides Lower Distortion And Lower Noise While Occupying Less Space. The New Circuit Is Pushed Close To The Limit Of Physics So That We Are Able To Squeeze Out The Last Bit Of Performance Of The Dac Chip..
Universal Compatibility And Ease Of Use - The D90 Iii Is A Breeze To Use With Its Wide Compatibility Range. It Supports Various Operating Systems Like Windows, Mac, Linux, And Ios/Android. For Windows Asio, A Simple Driver Setup Is All It Takes. The Device's Usb Hardware Is Based On Xmos Xu316 And Thesycon Drivers, Ensuring Stability And Reliability..
Ldac Wireless Available - D90 Iii Sabre Is Equipped With Qcc5125 And Bluetooth 5.1, Supports Ldac/Aptx-Adaptive/Aptx-Hd/Aac/Sbc. It Can Support Up To 96Khz/24Bit, So That High-Quality Audio Can Be Transmitted Wirelessly To Obtain Music Experience Beyond Cd Level..
Advanced Cpld Processing - We Achieved Incredible Jitter Rejection Using Cpld To Process The Clock Signal And Optimize The Digital Signal.Regardless Of Usb, Optical, Coaxial, Aes Input, Jitter Is As Low As -160Db..
Features
- Two ES9039SPRO chips - Each of the left and right audio channels independently utilizes an ES9039SPRO, providing higher SNR (135dB) , greater dynamic range, and lower distortion (<0.000045% THD+N) compared to the D90SE. Clearer details flow into your ears.
- Advanced CPLD processing - We achieved incredible jitter rejection using CPLD to process the clock signal and optimize the digital signal.Regardless of USB, optical, coaxial, AES input, jitter is as low as -160dB.
- Brand new I/V conversion - A brand new I/V conversion circuit is designed for better quality audio reproduction. The new circuit design provides lower distortion and lower noise while occupying less space. The new circuit is pushed close to the limit of physics so that we are able to squeeze out the last bit of performance of the DAC chip.
- LDAC wireless available - D90 III SABRE is equipped with QCC5125 and Bluetooth 5.1, supports LDAC/aptX-Adaptive/aptX-HD/AAC/SBC. It can support up to 96kHz/24bit, so that high-quality audio can be transmitted wirelessly to obtain music experience beyond CD level.
- Universal compatibility and ease of use - The D90 III is a breeze to use with its wide compatibility range. It supports various operating systems like Windows, Mac, Linux, and iOS/Android. For Windows ASIO, a simple driver setup is all it takes. The device's USB hardware is based on XMOS XU316 and Thesycon drivers, ensuring stability and reliability.
- See more on Amazon...
Brand: KGUSS | Manufacturer: TOPPING
Dimensions: 1.77 x 9.06 x 6.30 Inches
See On Amazon #8
Topping L50 Amplifier NFCA Modules 0.3uV Ultra Low Noise Cost-Effective Bypass Output Headphone Amplifier (Black)
Asin: B09F33FG73 | Model: L50-01 | PartNumber: L50-01
Max Output Power: 3500Mw X@16Ω, 540Mw X@300Ω.
L50 Has Three Gain Options. Covering A Wide Gain Range Is Sufficient To Meet The Needs Of Low-Sensitivity Full-Sized Over-Ears To High-Sensitivity 1Ems. With The Help Of Extremely Low Noise 0.3Uv, Even Lems Will Not Hear Any Background Noise..
L50 Adopts The New Nfca Circuit..
With The Help Of Nfca, L50 Easily Reaches The Top Of The Industry, And It Has Almost Perfect Performance Regardless Of Distortion, Dynamic Range, And Multi-Tone Testing..
Features
- Redesigned new NFCA circuit based on the same working principle as the one in A30 Pro. It provides 2x power at 300 Ohm compared to L30.
- With the help of NFCA, L50 easily reaches the top of the industry, and it has almost perfect performance regardless of distortion, dynamic range, and multi-tone testing.
- Max output power: 3500mW x@16 , 540mW x@300
- L50 adopts the New NFCA circuit.
- L50 has three gain options. Covering a wide gain range is sufficient to meet the needs of low-sensitivity full-sized over-ears to high-sensitivity 1EMs. With the help of extremely low noise 0.3uV, even lEMs will not hear any background noise.
- See more on Amazon...
Brand: TOPPING | Manufacturer: TOPPING
See On Amazon #9
Topping P50 Linear Power Supply for Topping E50/D50III/D50s/DX3 Pro+/A50III Ultra Low Noise 2X 5V 1A + 15V 1A
Asin: B07VRS6PLT | Model: TOPPING P50 Black | PartNumber: TOPPING P50 Black | Ean: 0708200855696, 0769135119536 | UPC: 769135119536, 708200855696
Low Noise - The Sealed Toroidal Transformer Has Small Magnetic Leakage And Low Noise,Which Is Very Suitable For Hifi Use.And The Transformer Is Designed To Suppress Emc And Noise.
Linear Regulator - The P50 Is Regulated With Three Tps7a4700 Ultralow Noise Linear Regulators.It Is Capable Of High-Accuracy,High-Precision Instrumentation-Level Applications And Hifi Applications,Making In The Best Choice For High-Performance Analog Circuits.
High Power Reserve - The 15V Modules Providesmore Than 10000Uf Capacitors In Total,And The 5V Modules Provides Total More Than 8000Uf Capacitors In Total;Giving The Out Enough Energy Reserves.
Compatible With Globlal Voltage - 115V For Ac 100V-120V 50/60 Hz,230V For Ac220v-240V 50/60 Hz.
Features
- Excellent Power Supply - Topping p50 match to E50/D50s&D50/D50s+A50.It is a excellent partner to DX3 Pro
- Compatible with Globlal Voltage - 115V for AC 100V-120V 50/60 Hz,230V for AC220V-240V 50/60 Hz
- Low Noise - The sealed toroidal transformer has small magnetic leakage and low noise,which is very suitable for HIFI use.And the transformer is designed to suppress EMC and noise
- High Power Reserve - The 15V modules providesmore than 10000uF capacitors in total,and the 5V modules provides total more than 8000uF capacitors in total;giving the out enough energy reserves
- Linear Regulator - The P50 is regulated with three TPS7A4700 ultralow noise linear regulators.It is capable of high-accuracy,high-precision instrumentation-level applications and HIFI applications,making in the best choice for high-performance analog circuits
- See more on Amazon...
Brand: TOPPING | Manufacturer: KGUSS
Dimensions: 2.05 x 4.33 x 4.33 Inches | Weight: 1.94 pounds
See On Amazon #10
Topping PA5 II Speaker Amplifier Compact Desktop Amplifier Fully Balanced AMP (PA5 II, Black)
Asin: B0CC4M8XK4
High Output Power The Pa5 Ii Plus Is Capable Of Delivering Up To 140W X 2 For 4-Ohm Loads At 10% Distortion, And 125W X 2 For 4-Ohm Loads Even When The Standard Is Raised To 1% Distortion. Similarly, The Pa5 I Can Output 100W X 2 For A 4-Ohm Load At 1% Distortion. High Output Power And Low Distortion Characteristics Make Pa5 Ii Series Amplifiers Sufficient To Meet The Needs Of Most Speakers And Use Occasions..
Special Partner- D10 Balanced D10 Balanced Can Provide High Fidelity Usb Decoding Function And Trs Balanced Output. When Used With Pa5 Ii Series Amplifiers, It Is Equivalent To Adding A High-Performance Usb Input Jack To The Pa5 Ii Series Amplifiers. This Combination Is Both Concise And Efficient When Only Usb Input And Amplifier Output Are Required..
Comprehensive Circuit Protection It Has No Noise When Turned On Or Off, And Has Complete Protection For Overvoltage, Undervoltage, Short Circuit, Overcurrent, And Overheating. Even If There Is An Unexpected Power Outage, It Will Not Generate Noise, Making You Worry Free To Use..
Thd+N As Low As An Excellent Dac The Distortion Of Pa5 Ii And Pa5 Ii Plus Is Already As Good As The Dac. When Outputting 5W Under A 4 Q Load, Thd+N<0.0004%; When Outputting 5W Under An 8 Q Load, Thd+N <0.0003%. The Extremely Low Distortion Level Takes Your Music Experience To The Next Level..
Features
- Fully balanced structure,Pure sound quality The PA5 II and PA5 II Plus adopt a fully balanced structure and an innovative Class D amplifier circuit to achieve high power and low distortion sound output. The excellent tuning technology of engineers ensures clear, clean, deep sound, and no audible noise floor. The fully balanced structure makes PA5 I/PA5 II Plus no more hum, no more noise, no more ground loop.
- THD+N as low as an excellent DAC The distortion of PA5 II and PA5 II Plus is already as good as the DAC. When outputting 5W under a 4 Q load, THD+N<0.0004%; When outputting 5W under an 8 Q load, THD+N <0.0003%. The extremely low distortion level takes your music experience to the next level.
- High output power The PA5 II Plus is capable of delivering up to 140W x 2 for 4-ohm loads at 10% distortion, and 125W X 2 for 4-ohm loads even when the standard is raised to 1% distortion. Similarly, the PA5 I can output 100W x 2 for a 4-ohm load at 1% distortion. High output power and low distortion characteristics make PA5 II series amplifiers sufficient to meet the needs of most speakers and use occasions.
- Comprehensive circuit protection It has no noise when turned on or off, and has complete protection for overvoltage, undervoltage, short circuit, overcurrent, and overheating. Even if there is an unexpected power outage, it will not generate noise, making you worry free to use.
- Special partner- D10 Balanced D10 Balanced can provide high fidelity USB decoding function and TRS balanced output. When used with PA5 II series amplifiers, it is equivalent to adding a high-performance USB input jack to the PA5 II series amplifiers. This combination is both concise and efficient when only USB input and amplifier output are required.
- See more on Amazon...
Brand: Fanmusic | Manufacturer: TOPPING PA5 II
Weight: 1.50 pounds
See On Amazon #11
KGUSS Topping A70Pro Fully Balanced Headphone Amplifier Preamp - 17000mWx2 Output Power, 2 Gain, R2R Relay Volume Control, Full Color Dispaly HiFi Audio Support Extensions(Black)
Asin: B0C4PNWCK7 | Model: US-A70 PRO-Black | PartNumber: US-A70 PRO-Black
👍 Relay Volume Control ▶️ A70 Pro Uses Relays And Resistor Networks To Form R2r Volume Control Module, Which Provides Precise Volume Control, Long Service Life, And Will Not Deviate Even At Low Volume..
👍 Expandable Inputs ▶️ The A70 Pro Has One Set Of Balanced Xlr And One Set Of Single-Ended Rca Inputs. But With The Ext90 Input Expansion, You Get A Total Of Four Balanced Xlr And Two Single-Ended Rca Inputs..
👍 A Headphone Amp, Also A Preamp ▶️ The A70 Pro Drives Headphones Well, And It Can Also Be Used As A Preamp. It Has The Same High Performance As The Headphone Amp Mode, With An Rca Output Impedance Of Only 50Ω And An Xlr Output Impedance Of Only 100Ω, Allowing It To Be Used With A Wide Range Of Input Impedance For Various Power Amplifiers. In Addition, A Full-Featured Remote Control Makes Operation Even Easier..
👍 Ground Loop Noise Disappearing Magic ▶️ When Multiple Devices Are Used In Combination, Ground Loop Noise May Be Encountered. A70 Pro Adds A Gnd/Lift Switch, When Ground Loop Noise Is Encountered Switch To Lift And The Noise Will Disappear..
Features
- T'ang-ku-la Module The T'ang-ku-la Module uses a new three-stage feedback circuit. Further reducing noise and high frequency distortion, making the dynamic range rise to an unmatched 147dB new realm. The new technology greatly reduces heat generation, thus greatly improving reliability, extending electronic component life, and reducing thermal noise.
- Ground Loop Noise Disappearing magic When multiple devices are used in combination, ground loop noise may be encountered. A70 Pro adds a GND/LIFT switch, when ground loop noise is encountered switch to LIFT and the noise will disappear.
- Relay volume control A70 Pro uses relays and resistor networks to form R2R volume control module, which provides precise volume control, long service life, and will not deviate even at low volume.
- A Headphone Amp, also a Preamp The A70 Pro drives headphones well, and it can also be used as a preamp. It has the same high performance as the headphone amp mode, with an RCA output impedance of only 50 and an XLR output impedance of only 100 , allowing it to be used with a wide range of input impedance for various power amplifiers. In addition, a full-featured remote control makes operation even easier.
- Expandable inputs The A70 Pro has one set of balanced XLR and one set of single-ended RCA inputs. But with the Ext90 input expansion, you get a total of four balanced XLR and two single-ended RCA inputs.
- See more on Amazon...
Brand: KGUSS | Manufacturer: TOPPING
Warranty: 1 year free manufacturer
See On Amazon #12
Topping A70 Pro Fully Balanced Headphone Amplifier 17000mW*2 Relay Volume Control Pre Amp wiht Remote Control(Silver)
Asin: B0C5944CJ3 | Model: A70 pro | PartNumber: A70 pro
Aurora Ui，Bring New Experience： Full Color Screen And Three Touch Buttons Experience Has Changed Since.Colors Jump Out At You The Display Of The Playback Information, Fft, Vu Can Be Switched According To Your Requirements..
A Headphone Amp, Also A Preamp: The A70 Pro Drives Headphones Well, And It Can Also Be Used As A Preamp. It Has The Same High Performance As The Headphone Amp Mode, With An Rca Output Impedance Of Only 500 And An Xlr Output Impedance Of Only 100Ω, Allowing It To Be Used With A Wide Range Of Input Impedance For Various Power Amplifiers. In Addition, A Full-Featured Remote Control Makes Operation Even Easier..
Relay Volume Control: A70 Pro Uses Relays And Resistor Networks To Form R2r Volume Control Module, Which Providing Precise Volume Control, Long Service Life, And Will Not Deviate Even At Low Volume..
Ground Loop Noise，Disappearing Magic： When Multiple Devices Are Used In Combination, Ground Loop Noise May Be Encountered. A70 Pro Adds A Gnd/Lift Switch, When Ground Loop Noise Is Encountered Switch To Lift And The Noise Will Disappear..
Features
- Re-optimized new circuit architecture Newly developed ultra-low noise input stage further improved the noise performance of balanced input and increased the input impedance to 20k thus having better compatibility with incoming devices. The gain architecture has also been redesigned to further reduce noise and distortion at high gain states than the previous architecture.
- Ground Loop Noise Disappearing magic When multiple devices are used in combination, ground loop noise may be encountered. A70 Pro adds a GND/LIFT switch, when ground loop noise is encountered switch to LIFT and the noise will disappear.
- Aurora UI bring new experience Full color screen and three touch buttons Experience has changed since.Colors Jump out at you The display of the playback information, FFT, VU can be switched according to your requirements.
- Relay volume control: A70 Pro uses relays and resistor networks to form R2R volume control module, which providing precise volume control, long service life, and will not deviate even at low volume.
- A Headphone Amp, also a Preamp: The A70 Pro drives headphones well, and it can also be used as a preamp. It has the same high performance as the headphone amp mode, with an RCA output impedance of only 500 and an XLR output impedance of only 100 , allowing it to be used with a wide range of input impedance for various power amplifiers. In addition, a full-featured remote control makes operation even easier.
- See more on Amazon...
Brand: Fanmusic | Manufacturer: TOPPING A70 Pro
See On Amazon #13
Topping PA7 Plus Power Amplifier 300W x 2 Class D Fully Balanced AMP XLR/TRS/RCA Input 12V Trigger Stereo Home Audio Amplifier(PA7 Plus Black)
Asin: B0C2TKPWLC | Model: PA7 Plus Black | PartNumber: PA7 Plus Black
👍 Insane Output Power ▶️ The Pa7 Series Amplifiers Are Less Than Half The Size Of An A4 Sheet Of Paper, But They Are All Capable Of Delivering 210W × 2 (Pa7) Or 300W × 2 (Pa7 Plus) To A 4-Ohm Load At 10% Distortion. If The Higher Standard 1% Distortion Is Used As A Requirement, The 4-Ohm Load Will Output 200W × 2 (Pa7)Or 245W × 2 (Pa7 Plus) Respectively. Moreover, These High Power Outputs And Low Distortion Characteristics Are Sufficient To Meet The Needs Of Most Speakers And Applications..
👍 All Standby Perfect Match ▶️ Topping Pa7 Plus Can Be Perfectly Paired With The E70, E70 Velvet And L70 To Instantly Unlock A More Comprehensive System Of High Quality Music Experiences, From Digital Sources To Speakers And Headphones. Pa7 Series Is Equipped With 12V Trigger Input Trigger Interface, Which Can Be Linked With Other Devices To Switch Onand Off. One Button To Light Up And Turn On Synchronously..
👍 The Joy Of Stacking At This Moment ▶️ The E70 And E70 Velvet Have Preamp Functions And Have The Exact Same Design Language As The Pa7 Series Amplifiers, And The Signal Can Be Transmitted Between The Dac And The Amplifier Via Xlr, Trs Balanced Or Rca Cables. You Can Control The Volume On Pa7 Plus, Or Set To Bypass The Volume Control Of Pa7 Plus,Then You Can Use A Better Pre-Amplifier For Volume Control..
👍 Distortion Is As Outstanding As Dac ▶️ The Distortion Performance Of Pa7 Plus Is Matching Good Performing Dacs. The Distortion Stayed Extremely Low Before Clipping. This Ensures Consistent Listening Pleasure Across Volume Levels..
Features
- Fully balanced TOPPING PA7 Plus utilize a newClass D amplifier circuit with a variety of exclusive optimization techniques, which has powerful low distortion performance and power output. These technologies ensure a clearer, cleaner, deeper sound without any background noise. In addition, the balanced structure is able to reduce noise during transmission, thus enabling better performance of the audio source and avoiding wasted performance during transmission.
- Distortion is as outstanding as DAC The distortion performance of PA7 Plus is matching good performing DACs. The distortion stayed extremely low before clipping. This ensures consistent listening pleasure across volume levels.
- Insane output power The PA7 series amplifiers are less than half the size of an A4 sheet of paper, but they are all capable of delivering 210W 2 (PA7) or 300W 2 (PA7 Plus) to a 4-ohm load at 10% distortion. If the higher standard 1% distortion is used as a requirement, the 4-ohm load will output 200W 2 (PA7)or 245W 2 (PA7 Plus) respectively. Moreover, these high power outputs and low distortion characteristics are sufficient to meet the needs of most speakers and applications.
- The joy of stacking at this moment The E70 and E70 Velvet have preamp functions and have the exact same design language as the PA7 series amplifiers, and the signal can be transmitted between the DAC and the amplifier via XLR, TRS balanced or RCA cables. You can control the volume on PA7 Plus, or set to bypass the volume control of PA7 Plus,then you can use a better pre-amplifier for volume control.
- All standby Perfect Match TOPPING PA7 Plus can be perfectly paired with the E70, E70 Velvet and L70 to instantly unlock a more comprehensive system of high quality music experiences, from digital sources to speakers and headphones. PA7 series is equipped with 12V Trigger input trigger interface, which can be linked with other devices to switch onand off. One button to light up and turn on synchronously.
- See more on Amazon...
Brand: KGUSS | Manufacturer: TOPPING
See On Amazon #14
TOPPING L70 Full Balanced NFCA Headphone Amplifier, 7500mWx2 HiFi Headphone Amp, 4-Pin XLR/4.4mm balanced/6.35mm SE Earphone Jack/Line Output XLR/TRS/RCA Input Home Audio Preamplifier (Black)
Asin: B0BKG9PNH8 | Model: TOPPING L70 Schwarz | PartNumber: TOPPING L70 Schwarz
【2 Gain Settings To Suit Different Needs】L70 Has 2 Gain Settings, Which Cover A Wider Range Of Needs To Meet The Needs Of Different Headphones From Low-Sensitivity Full-Sized Over-Ears To High-Sensitivity Iems. With The Help Of Extremely Low Noise 0.3Uv, Even Iems Will Not Hear Any Background Noise..
【Ground Loop Noise Terminator】The L70 Has A Gnd/Lift Switch To Solve The Problem Of Ground Loop Noise. When In Normal Use, Set It To Gnd; And When Ground Loop Noise Is Encountered, Switch It To Lift. Then The Ground Loop Noise Is Terminated..
If You Have Any Questions During Use, Aoshida Will Quickly Guide You To Solve Them..
【Headphone Amp & Pre-Amp】The L70 Is Not Only Able To Drive The Headphones But Also Served As A Pre-Amp. When It Is In Pre-Amp Mode, You Can Get The Same High Performance As The Headphone Amp Mode, And The 20Ohm Se And 40Ohm Balanced Output Impedance Are Widely Suitable For Various Power Amplifiers. The Full-Featured Remote Control Makes It More Convenient For You To Use..
【Compatible With Most Headphones】The L70 Is Compatible With Common Headphone Jacks Including 4-Pin Xlr Balanced, 4.4Mm Balanced, 6.35Mm Single Ended, And 3.5Mm Single Ended. L70's Output Has High Output Voltage, High Output Current, Low Noise, Low Output Impedance. The Built-In Fully Balanced Amplifier Circuit Can Not Only Fit Well With Balanced Headphones, But Also Have Perfect Performance With Single Ended Headphones..
Features
- High Performance NFCA The TOPPING L70 amplifier uses an improved NFCA circuit. It achieves a low noise of 0.3uV, a dynamic range of 144 dB, and an impressive THD+N of 0.000055%. Both distortion and dynamic range multi-tone tests are near perfect, so that high fidelity music can be vividly performed on different headphones.
- Compatible with most headphones The L70 is compatible with common headphone jacks including 4-pin XLR balanced, 4.4mm balanced, 6.35mm single ended, and 3.5mm single ended. L70's output has high output voltage, high output current, low noise, low output impedance. The built-in fully balanced amplifier circuit can not only fit well with balanced headphones, but also have perfect performance with single ended headphones.
- 2 gain settings to suit different needs L70 has 2 gain settings, which cover a wider range of needs to meet the needs of different headphones from low-sensitivity full-sized over-ears to high-sensitivity IEMS. With the help of extremely low noise 0.3uV, even IEMS will not hear any background noise.
- Headphone Amp & Pre-amp The L70 is not only able to drive the headphones but also served as a pre-amp. When it is in pre-amp mode, you can get the same high performance as the headphone amp mode, and the 20ohm SE and 40ohm balanced output impedance are widely suitable for various power amplifiers. The full-featured remote control makes it more convenient for you to use.
- Ground Loop Noise Terminator The L70 has a GND/LIFT switch to solve the problem of ground loop noise. When in normal use, set it to GND; and when ground loop noise is encountered, switch it to LIFT. Then the ground loop noise is terminated.
- If you have any questions during use, AOSHIDA will quickly guide you to solve them.
- See more on Amazon...
Brand: AOSHIDA | Manufacturer: TOPPING
Dimensions: 1.97 x 7.48 x 5.51 inches
Warranty: One year warranty
See On Amazon #15
Topping MX3s Amplifier 62W x 2 Class D Power amp Subwoofer Out 700mW x 2 Headphone amp 24-bit/192kHz AKM USB C DAC Bluetooth Support Sliver
Asin: B0BYC3RWP5 | Model: US-MX3S-Silver | PartNumber: US-MX3S-Silver
👍 Built-In Ak4437 Dac ▶️ The Topping Mx3s Features An Ak4437 Dac And Is Equipped With A Qualcomm Bluetooth Chip, The Qcc3040, Providing Exceptional Usb, Optical, Coaxial, And Bluetooth Input Capabilities. This Allows For Easy Connection Of Various Audio Sources, Such As Computers, Set-Top Boxes, Dvd Players, Smartphones And Tablets, Making It Incredibly Versatile..
👍 Subwoofer Output ▶️ The Topping Mx3s Has A Built-In Subwoofer Output That Can Be Wired For A Full 2.1-Channel Premium Listening Experience..
👍 Nice Bluetooth Performance ▶️ The Topping Mx3s Supports Bluetooth Protocols Such As Aac, Sbc, Aptx, Aptx-Hd, And Aptx Adaptive, Achieving Transmission Distortion Below 0.001%. It Brings You An Exceptional Audio Experience..
👍 Merus Class D Amplifier ▶️ It Can Output 62W X2 At 10% Distortion And 50W X2 At 1% Distortion Under 4-Ohm Load. 40W X2 At 10% Distortion And 30W X2 At 1% Distortion Under 8-Ohm Load..
Features
- TOPPING MX3s DAC/Headphone Amp/Power Amp The TOPPING MX3s is a comprehensive audio solution that combines a DAC, headphone amplifier, and power amplifier. With this versatile system, you can experience your favorite music and movies through a variety of devices, including in-ear monitors, full-sized headphones, and even a 2.1 speaker system.
- Merus Class D amplifier It can output 62W x2 at 10% distortion and 50W x2 at 1% distortion under 4-ohm load. 40W x2 at 10% distortion and 30W x2 at 1% distortion under 8-ohm load.
- Built-in AK4437 DAC The TOPPING MX3s features an AK4437 DAC and is equipped with a Qualcomm Bluetooth chip, the QCC3040, providing exceptional USB, optical, coaxial, and Bluetooth input capabilities. This allows for easy connection of various audio sources, such as computers, set-top boxes, DVD players, smartphones and tablets, making it incredibly versatile.
- Nice Bluetooth performance The TOPPING MX3s supports Bluetooth protocols such as AAC, SBC, aptX, aptX-HD, and aptX Adaptive, achieving transmission distortion below 0.001%. It brings you an exceptional audio experience.
- Subwoofer Output The TOPPING MX3s has a built-in subwoofer output that can be wired for a full 2.1-channel premium listening experience.
- See more on Amazon...
Brand: KGUSS | Manufacturer: TOPPING
See On Amazon #16
Topping D70 Pro Sabre ES9039SPro Fully Balanced DAC, Bluetooth 5.1 Wireless Audio DAC, USB/AES/BT5.1/Optical/Coaxial Input, XLR/RCA Audio DAC, Home Audio DA Converters with Remote Control (Black)
Asin: B0C89DVVCL | Model: D70Pro SE 黒 | PartNumber: D70Pro SE 黒
Aurora Ui For An Enhanced Experience : The D70 Pro Sabre Features A Full-Color Display With An Intuitive Aurora Ui. Its Three Touch Buttons Allow For Easy Navigation And Customization Of Playback Information, Including Fft And Vu Displays, According To Your Preferences..
Wide Compatibility And Plug-And-Play : The D70 Pro Sabre Is Compatible With Various Operating Systems, Including Windows 10, Windows 11, Etc. Simply Connect It To Your Audio Source And Start Enjoying Improved Sound Quality. It Offers Plug-And-Play Functionality, With Driver Installation And Setup Required Only For Asio Applications On Windows Systems..
If You Have Any Questions During Use, Aoshida Will Quickly Guide You To Solve Them..
Bluetooth 5.1 Transmission : Enjoy Wireless High-Quality Audio With The D70 Pro Sabre's Support For Ldac, Aptx-Adaptive, Aptx Hd, Aptx, Aac, And Sbc Audio Encoding. This Enables Wireless Transmission Of Audio From Compatible Devices For A Superior Sound Experience..
New I/V Conversion : Experience Higher Quality Audio Playback With The D70 Pro Sabre's New I/V Conversion Circuitry. It Utilizes An Exclusive Design That Minimizes Distortion And Noise, Providing Superior Sound While Occupying Less Space..
Features
- Powerful Performance : TOPPING D70 Pro SABRE DAC adopts the powerful ES9039SPRO chipset, offering exceptional 32-bit audio resolution and delivering a stable and powerful performance for an immersive listening experience.
- New I/V Conversion : Experience higher quality audio playback with the D70 Pro SABRE's new I/V conversion circuitry. It utilizes an exclusive design that minimizes distortion and noise, providing superior sound while occupying less space.
- Aurora UI for an Enhanced Experience : The D70 Pro SABRE features a full-color display with an intuitive Aurora UI. Its three touch buttons allow for easy navigation and customization of playback information, including FFT and VU displays, according to your preferences.
- Bluetooth 5.1 Transmission : Enjoy wireless high-quality audio with the D70 Pro SABRE's support for LDAC, aptX-Adaptive, aptX HD, aptX, AAC, and SBC audio encoding. This enables wireless transmission of audio from compatible devices for a superior sound experience.
- Wide Compatibility and Plug-and-Play : The D70 Pro SABRE is compatible with various operating systems, including Windows 10, Windows 11, etc. Simply connect it to your audio source and start enjoying improved sound quality. It offers plug-and-play functionality, with driver installation and setup required only for ASIO applications on Windows systems.
- If you have any questions during use, AOSHIDA will quickly guide you to solve them.
- See more on Amazon...
Brand: AOSHIDA | Manufacturer: TOPPING
Dimensions: 1.89 x 8.74 x 6.93 Inches
See On Amazon #17
Topping A70Pro Fully Balanced Headphone Amplifier 17000mW x 17000mw Power Output 6.35mm/4.4mm/XLR/RCA Output HiFi DAC Desktop Home Audio Amp for Earphone/Headphones/IEMs (Black)
Asin: B0C8B15N6B | Model: A70pro | PartNumber: A70pro
【Aurora Ul Bring New Experience】 Full Color Screen And Three Touch Buttons Experience Has Changed Since. Cusotmized Functions Are Available By Pressing The Volume Knob,The Display Of The Playback Information , Fft , Vu Can Be Switched According To Your Requirement..
【Best Match D70 Pro Sabre】A70 Pro And D70 Pro Sabre Have Identical Design Languages And Can Meet The Needs Of The Vast Majority Of Headphones And Active Speakers.The A70 Pro And D70 Pro Sabre Can Be Switched On And Off In Conjunction Via The 12V Trigger Connector,Allowing The A70 Pro To Be Synchronized With The D70 Pro Sabre For Automatic Or Manual Switching..
【Ground Loop Noise Disappearing Magic And Relay Volume Control】 When Multiple Devices Are Used In Combination Ground Loop Noise May Be Encountered A70 Pro Adds A Gnd / Lift Switch When Ground Loop Noise Is Encountered Switch To Lift And The Noise Will Disappear .A70 Pro Uses Relays And Resistor Networks To Form R2r Volume Control Module , Which Providing Precise Volume Control , Long Service Life , And Will Not Deviate Even At Low Volume..
【Re-Optimized New Circuit Architecture】Newly Developed Ultra-Low Noise Input Stage Further Improved The Noise Performance Of Balanced Input And Increased The Input Impedance To 20Kn Thus Having Better Compatibility With Incoming Devices.The Gain Architecture Has Also Been Redesigned To Further Reduce Noise And Distortion At High Gain States Than The Previous Architecture..
Features
- T'ang-ku-la Module The Tang-ku-la Module uses a new three-stage feedback circuit.Further reducing noise and high frequency distortion , making the dynamic range rise to an unmatched 147db new realm . The new technology greatly reduces heat generation , thus greatly improving reliability , extending electronic component life , and reducing thermal noise.
- Re-optimized new circuit architecture Newly developed ultra-low noise input stage further improved the noise performance of balanced input and increased the input impedance to 20kn thus having better compatibility with incoming devices.The gain architecture has also been redesigned to further reduce noise and distortion at high gain states than the previous architecture.
- Aurora Ul bring new experience Full color screen and three touch buttons Experience has changed since. Cusotmized functions are available by pressing the volume knob,The display of the playback information , FFT , VU can be switched according to your requirement.
- Ground Loop Noise Disappearing magic and Relay volume control When multiple devices are used in combination ground loop noise may be encountered A70 Pro adds a GND / LIFT switch when ground loop noise is encountered switch to LIFT and the noise will disappear .A70 Pro uses relays and resistor networks to form R2R volume control module , which providing precise volume control , long service life , and will not deviate even at low volume.
- Best match D70 Pro SABRE A70 Pro and D70 Pro SABRE have identical design languages and can meet the needs of the vast majority of headphones and active speakers.The A70 Pro and D70 Pro SABRE can be switched on and off in conjunction via the 12V Trigger connector,allowing the A70 Pro to be synchronized with the D70 Pro SABRE for automatic or manual switching.
- See more on Amazon...
Brand: AOSHIDA | Manufacturer: TOPPING
Dimensions: 1.89 x 8.74 x 6.93 Inches | Weight: 4.63 pounds
See On Amazon #18
Topping A90 Discrete NFCA Headphone Amplifier Pre-Amplifier 6.35mm/4.4mm Balanced/4-Pin-XLR Headphone Output R2R Relay Volume Control (Black)
Asin: B0B4JQD8G7 | Model: A90D-B | PartNumber: A90D-B
►2 Gain Settings► Topping A90 Discrete Has Two Gain Options, Which Are Enough To Cover A Wide Variety Of Headphones: Low Gain To Drive The Iems With High Sensitivity, And High Gain To Drive Full-Sized Over-Ears. Combined With The 0.2Uvrms Ultra-Low Noise, Even Sensitive Lems Will Not Suffer From Any Noise..
►A Headphone Amp, Also A Preamp► When It Is In Preamp Mode, You Can Get The Same High Performance As The Headphone Amp Mode, And The 20Ohm Se And 40Ohm Balanced Output Impedance Are Widely Suitable For Various Power Amplifiers. A90 Discrete Can Not Only Switch Between The Headphone Amp (Only Output From The Headphone Jack) And The Preamp(Only Output From Rca And Xlr), But Also Support The Output From All At The Same Time..
►Ground Loop Noise Terminator► Ground Loop Noise May Be Encountered When Multiple Devices Are Used In Combination. A90 Discrete Adds A Gnd/Lift Switch To Solve This Problem. When In Normal Use, Set It To Gnd; And When Ground Loop Noise Is Encountered, Switch It To Lift. Then The Ground Loop Noise Is Eliminated..
►High Output Voltage, High Current, Low Output Impedance, No Headphones That Can't Be Dealt With►High Output Voltage Can Easily Drive High Impedance Headphones; High Output Current Allows Low-Sensitivity Headphones To Obtain Enough Power; The Low Output Impedance Will Not Bring Unnecessary Effect On Fr When Driving Low-Impedance Headphones. Different Headphones Can Be Easily Driven By The A90 Discrete..
Features
- Fully discrete NFCA also create wonderful amp TOPPING A90D uses fully discrete components to redesign the NFCA (Nested Feedback Composite Amplifier)module. 4 built-in NFCA-Discrete modules which each them uses 39 transistors build up fully balanced structure. The optimized Voltage Current hybrid feedback architecture along with UHGF (Ultra High Gain Feedback) technology provide excellent DC and AC performance.
- High output voltage, high current, low output impedance, no headphones that can't be dealt with High output voltage can easily drive high impedance headphones; High output current allows low-sensitivity headphones to obtain enough power; The low output impedance will not bring unnecessary effect on FR when driving low-impedance headphones. Different headphones can be easily driven by the A90 Discrete.
- 2 Gain settings TOPPING A90 Discrete has two gain options, which are enough to cover a wide variety of headphones: low gain to drive the IEMs with high sensitivity, and high gain to drive full-sized over-ears. Combined with the 0.2uVrms ultra-low noise, even sensitive lEMs will not suffer from any noise.
- Ground Loop Noise Terminator Ground loop noise may be encountered when multiple devices are used in combination. A90 Discrete adds a GND/LIFT switch to solve this problem. When in normal use, set it to GND; and when ground loop noise is encountered, switch it to LIFT. Then the ground loop noise is eliminated.
- A Headphone Amp, also a Preamp When it is in preamp mode, you can get the same high performance as the headphone amp mode, and the 20ohm SE and 40ohm balanced output impedance are widely suitable for various power amplifiers. A90 Discrete can not only switch between the headphone amp (only output from the headphone jack) and the preamp(only output from RCA and XLR), but also support the output from all at the same time.
- See more on Amazon...
Brand: KGUSS | Manufacturer: KGUSS
Weight: 2.76 pounds
Warranty: One year free repair
See On Amazon #19
Topping A50 III NFCA Headphone amp Pre-Amplifier - SE/BAL Input 6.35mm Single-dended 4.4mm Balanced Jack 3500mW x2 Powerful Output (A50III Black)
Asin: B0CXT6D9GJ | Model: US-A50III | PartNumber: US-A50III
👍 Single-End / Balanced Application ▶️ The A50 Iii Has 6.35Mm Single-Ended And 4.4Mm Balanced Headphone Jack, As Well As Rca Single-Ended And Trs Balanced Input. It Is Simple And Efficient For You To Choose Different Input And Output Combinations..
👍 Perfect Partner—D50 Iii ▶️ The D50 Iii And A50 Iii Have The Same Design Language. This Combination Has Unique Metallic Aesthetics No Matter How It's Placed. And They Meet The Needs Of Most Headphones And Active Speakers. The A50 Iii Can Also Be Switched On And Off With The D50 Iii Via 12V Trigger..
👍 Powerful Output ▶️ With A Powerful Output Of 3500Mw X 2, The A50 Iii Ensures That Most Headphones Can Maximize Their Performance. It Maintains A Low Distortion Rate Of Less Than 0.1% Even At High Power..
👍 12V Trigger ▶️ The A50 Iii Is Equipped With 12V Trigger Input, Which Supports Switching On And Off Synchronously With Other Devices..
👍 Wide Range Of Adaptation To Headphones ▶️ The A50 Iii Has Three Gain Selections For All Types Of Headphones. With Low Noise Of 0.3Uvrms, Iems Will Not Be Disturbed By Any Noise Floor..
👍 Full Aluminum Case ▶️ A50 Iii Has A Unique Integrated Design. It Has Gone Through Dozens Of Processes Of Planning, Design And Precision Machining From Solid Aluminum Bricks. Cnc Machining Provides Excellent Electromagnetic Shielding While Giving The A50 Iii A Smooth Appearance And Superior Strength. It Is Not Only The Masterpiece Of Craftsmanship, But Also The Perfect Combination Of Art And Technology..
Features
- Ultra-high Performance NFCA modules A50 III uses the same NFCA module from A50s. Voltage Current hybrid feedback architecture along with UHGF technology provides excellent DCand AC performance. High output current drive capability allows the amp driving low impedance headphones with ease.
- Full aluminum case A50 III has a unique integrated design. It has gone through dozens of processes of planning, design and precision machining from solid aluminum bricks. CNC machining provides excellent electromagnetic shielding while giving the A50 III a smooth appearance and superior strength. It is not only the masterpiece of craftsmanship, but also the perfect combination of art and technology.
- Single-end / Balanced application The A50 III has 6.35mm single-ended and 4.4mm balanced headphone jack, as well as RCA single-ended and TRS balanced input. It is simple and efficient for you to choose different input and output combinations.
- Wide range of adaptation to headphones The A50 III has three gain selections for all types of headphones. With low noise of 0.3uVrms, IEMs will not be disturbed by any noise floor.
- Powerful Output With a powerful output of 3500mW x 2, the A50 III ensures that most headphones can maximize their performance. It maintains a low distortion rate of less than 0.1% even at high power.
- 12V Trigger The A50 III is equipped with 12V Trigger input, which supports switching on and off synchronously with other devices.
- Perfect partner D50 III The D50 III and A50 III have the same design language. This combination has unique metallic aesthetics no matter how it's placed. And they meet the needs of most headphones and active speakers. The A50 III can also be switched on and off with the D50 III via 12V Trigger.
- See more on Amazon...
Brand: KGUSS | Manufacturer: TOPPING
Warranty: 1 YEAR WARRANTY
See On Amazon
Looking For Something Else?
Search