SpeTool Spiral Router Bits with UpCut 4 inch Extra Long1/4 inch Cutting Diameter 2 inch Cutting Length CNC Router Bit Carving Tool
Asin: B09M6T9221 | Model: SPXL-1/4-1/4-U | PartNumber: SPXL-1/4-1/4-U
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Durable And Precise. Spetool Upcut Router Bits Are High-Quality Construction Ensures Durability And Precision, Allowing For Consistent And Accurate Cuts..
2 Flutes. Spiral Bit Design Allows For Efficient Chip Removal, Reducing Heat Buildup, Better Than Straight Bits.
Spetool Service. Good Quality, Cost-Effective, Efficient After-Sales Service, Etc..
Compatibility. This Cnc Router Bit Is Perfect For Soft Woods, Hard Woods, Plywood, Laminate, Oak, Mdf And Any Hardwood Working. It Can Be Used With Cnc Router And Handheld Router With 1/4" Collet..
Up Cut. Spiral Bits Used For Smoothly Upcut Groove And Slots, Plunge Mortises, Cycles And Dado With Clean Edge And Bottom, Better Than Straight Bits.
Features
- SPECIFICATION. Solid carbide up cut router bits with 1/4inch shank and 1/4inch cutting diameter, 2 inch cutting length, 4 inch for total length , can be used on routers with 1/4" collect.
- UP CUT. Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dado with clean edge and bottom, better than straight bits
- DURABLE AND PRECISE. SpeTool Upcut router bits are high-quality construction ensures durability and precision, allowing for consistent and accurate cuts.
- COMPATIBILITY. This CNC Router Bit is perfect for soft woods, hard woods, Plywood, laminate, OAK, MDF and any hardwood working. It can be used with cnc router and handheld router with 1/4 collet.
- 2 FLUTES. Spiral Bit Design allows for efficient chip removal, reducing heat buildup, better than straight bits
- SPETOOL SERVICE. Good quality, cost-effective, efficient after-sales service, etc.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon Similar To SpeTool Spiral Router Bits with
#1
SpeTool Compression (up&Down) Spiral Flush Trim Router Bit Solid Carbide 1-1/8 Inch Cutting Length 1/4 Inchs Shank with Bottom Bearing Pattern Router Bit for Woodwoking
Asin: B0B6VJ31NK | Model: SPTL-D1/4-TAC | PartNumber: SPTL-D1/4-TAC
Sharp Efficient. The Flush-Trim Spiral Router Bits Is Sharper And Stay Sharp Longer Than Conventional Flush-Trim Router Bits.Provide Better Chip Evacuation, Less Heat Buildup, And Cleaner Edges.
Tips. After Each Use Or Continuous Processing For Half An Hour, Please Removel Wood Chips Covering The Flush Trim Bits To Extend Tool Lifespan.
Wide Application. This Flush Trim Bit Can Be Used For Any Flush Trim Situation And Is An Excellent Choice For Pattern Or Template Work.
Compatibility. The Spiral Flush Trim Router Bits Is Perfect For Soft Woods, Hard Woods, Plywood, Laminate, Oak, Mdf And Any Hardwood Working. It Can Be Used With Table Mount And Handheld Router With 1/4" Collet.
Smooth Stable. The Router Bearing Bit Uses A Double Ball Bearing Pilot At The Tip To Run Against Your Project Template Ensure Smooth Running.
Coating. The New Coating Provide Up To 2.5 Times Life Than The Uncoated..
Features
- SPECIFICATION. Compression flush trim Router Bits 1-1/8" cutting length; 1/4" cutting diameter; 1/4" shank; 3" overall length, can be used on routers with 1/4" collect
- COATING. The new coating provide up to 2.5 times life than the uncoated.
- SHARP EFFICIENT. The flush-trim spiral router bits is sharper and stay sharp longer than conventional flush-trim router bits.provide better chip evacuation, less heat buildup, and cleaner edges
- SMOOTH STABLE. The router bearing bit uses a double ball bearing pilot at the tip to run against your project template ensure smooth running
- WIDE APPLICATION. This flush trim bit can be used for any flush trim situation and is an excellent choice for pattern or template work
- COMPATIBILITY. The spiral flush trim Router Bits is perfect for soft woods, hard woods, Plywood, laminate, OAK, MDF and any hardwood working. It can be used with table mount and handheld router with 1/4 collet
- Tips. After each use or continuous processing for half an hour, please removel wood chips covering the flush trim bits to extend tool lifespan
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #2
SpeTool Down Cut Spiral Router Bit 1/16 inch Cutting Diameter with 1/4 inch Shank End Mill for Woodwork CNC Machine Tools
Asin: B099F43S5K | Model: SP-D1/4-1/16-D-FBA | PartNumber: SP-D1/4-1/16-D-FBA
Durable And Precise. Spetool Downcut Router Bits Are High-Quality Construction Ensures Durability And Precision, Allowing For Consistent And Accurate Cuts..
2 Flutes. Spiral Bit Design Allows For Efficient Chip Removal, Reducing Heat Buildup, Better Than Straight Bits.
Spetool Service. Good Quality, Cost-Effective, Efficient After-Sales Service, Etc..
Compatibility. This 1/16 Router Bit Set Is Perfect For Soft Woods, Hard Woods, Plywood, Laminate, Oak, Mdf And Any Hardwood Working. It Can Be Used With Cnc Router And Handheld Router With 1/4" Collet..
Down Cut. Spiral Cnc Bits Used For Smoothly Downcut Groove And Slots, Mortises, Cycles And Dados Leave With Clean Edge And Top Surface, Better Than Straight Bits.
Features
- SPECIFICATION. Solid Carbide down cut router bits with 1/4inch shank and 1/16inch cutting diameter, 1/2 inch cutting length, 2 inch for total length , can be used on routers with 1/4" collect.
- DOWN CUT. Spiral CNC bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits
- DURABLE AND PRECISE. SpeTool Downcut router bits are high-quality construction ensures durability and precision, allowing for consistent and accurate cuts.
- COMPATIBILITY. This 1/16 router bit set is perfect for soft woods, hard woods, Plywood, laminate, OAK, MDF and any hardwood working. It can be used with cnc router and handheld router with 1/4 collet.
- 2 FLUTES. Spiral Bit Design allows for efficient chip removal, reducing heat buildup, better than straight bits
- SPETOOL SERVICE. Good quality, cost-effective, efficient after-sales service, etc.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #3
SpeTool Up Down Compression Spiral Flush Trim Router Bit Bottom Bearing,1/2 Inch Shank 1-1/2 Inch Cutting Length Solid Carbide Flush Trim Router Bits
Asin: B0C1TRBCLP
Sharp Efficient. The Flush-Trim Spiral Router Bits Is Sharper And Stay Sharp Longer Than Conventional Flush-Trim Router Bits.Provide Better Chip Evacuation, Less Heat Buildup, And Cleaner Edges.
Tips. After Each Use Or Continuous Processing For Half An Hour, Please Removel Wood Chips Covering The Flush Trim Bits To Extend Tool Lifespan.
Wide Application. This Flush Trim Bit Can Be Used For Any Flush Trim Situation And Is An Excellent Choice For Pattern Or Template Work.
Compatibility. The Spiral Flush Trim Router Bits Is Perfect For Soft Woods, Hard Woods, Plywood, Laminate, Oak, Mdf And Any Hardwood Working. It Can Be Used With Table Mount And Handheld Router With 1/4" Collet.
Smooth Stable. The Router Bearing Bit Uses A Double Ball Bearing Pilot At The Tip To Run Against Your Project Template Ensure Smooth Running.
Coating. The New Coating Provide Up To 2.5 Times Life Than The Uncoated.
Features
- SPECIFICATION. Compression flush trim Router Bits 1-1/2" cutting length; 1/2" cutting diameter; 1/2" shank; 4" overall length, can be used on routers with 1/2" collect
- COATING. The new coating provide up to 2.5 times life than the uncoated
- SHARP EFFICIENT. The flush-trim spiral router bits is sharper and stay sharp longer than conventional flush-trim router bits.provide better chip evacuation, less heat buildup, and cleaner edges
- SMOOTH STABLE. The router bearing bit uses a double ball bearing pilot at the tip to run against your project template ensure smooth running
- WIDE APPLICATION. This flush trim bit can be used for any flush trim situation and is an excellent choice for pattern or template work
- COMPATIBILITY. The spiral flush trim Router Bits is perfect for soft woods, hard woods, Plywood, laminate, OAK, MDF and any hardwood working. It can be used with table mount and handheld router with 1/4 collet
- Tips. After each use or continuous processing for half an hour, please removel wood chips covering the flush trim bits to extend tool lifespan
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #4
SpeTool Spiral Upcut Router Bit 1/2 Inch Shank with Extra Long Life Coating, Carbide CNC Router Bits End Mill for Wood Mortises Carving Engraving
Asin: B0BNBC2YM6 | Model: SPL-D1/2-1/2-U-SPE-X | PartNumber: SPL-D1/2-1/2-U-SPE-X
Up Cut. Spiral Bits Used For Smoothly Upcut Groove And Slots, Plunge Mortises, Cycles And Dado With Clean Edge And Bottom, Better Than Straight Bits.
Durable And Precise. This Upcut Router Bits Are High-Quality Construction Ensures Durability And Precision, Allowing For Consistent And Accurate Cuts..
Spetool Service. Good Quality, Cost-Effective, Efficient After-Sales Service, Etc..
Compatibility. This Router Bits Is Perfect For Soft Woods, Hard Woods, Plywood, Laminate, Oak, Mdf And Any Hardwood Working. It Can Be Used With Cnc Router And Handheld Router With 1/2" Collet..
Coating. The New Coating Provide Up To 2.5 Times Life Than The Uncoated, Make The Bit Sturdy Durable, Sharp Efficient, Smooth Stable..
Features
- SPECIFICATION. Up cut router bits 2" cutting length; 1/2" cutting diameter; 1/2" shank; 4" overall length, can be used on routers with 1/2" collect.
- COATING. The new coating provide up to 2.5 times life than the uncoated, make the bit sturdy durable, sharp efficient, smooth stable.
- UP CUT. Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dado with clean edge and bottom, better than straight bits
- COMPATIBILITY. This Router Bits is perfect for soft woods, hard woods, Plywood, laminate, OAK, MDF and any hardwood working. It can be used with cnc router and handheld router with 1/2 collet.
- DURABLE AND PRECISE. This Upcut router bits are high-quality construction ensures durability and precision, allowing for consistent and accurate cuts.
- SPETOOL SERVICE. Good quality, cost-effective, efficient after-sales service, etc.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #5
SpeTool Carbide Compressiom Flush Trim Router Bit Top & Bottom Bearing 1/2 inch Cutting Dia with 1/4 inch Shank Pattern Template Woodworking Tool
Asin: B0C1TSJTXQ
Industrial Quality. The Flush Cut Router Bit Is Made Of Industrial Super-Strength Steel Shank And Solid Tungsten Carbide Cutter With High Hardness And Durable..
Tips. After Each Use Or Continuous Processing For Half An Hour, Please Removel Wood Chips Covering The Flush Trim Bits To Extend Tool Lifespan.
Applicable Matgerials. The Spiral Compression Flush Trim Router Bits Is Perfect For Trimming Particle Board, Chipboard, Mdf, Density Board, Melamine Board, Veneer Plywood(Laminate) And Solid Wood..
Spetool Service. Coming With Storage Case. Good Quality, Cost-Effective, Efficient After-Sales Service, Etc..
Application Equipment. This Flush Trim Bit Can Be Used For Any Flush Trim Situation And Is An Excellent Choice For Pattern Or Template Work, Used On Table Mounted Router And Hand Held Router..
High Performance. This Router Bit Is Sharper And Stay Sharp Longer Than Conventional Flush-Trim Router Bits. Provide Better Chip Evacuation, Less Heat Buildup, And Cleaner Edges..
Features
- SPECIFICATION. 1 cutting length, 1/2 cutting diameter, 1/4 shank, compression cut, top & bottom bearing.
- HIGH PERFORMANCE. This router bit is sharper and stay sharp longer than conventional flush-trim router bits. Provide better chip evacuation, less heat buildup, and cleaner edges.
- INDUSTRIAL QUALITY. The flush cut router bit is made of Industrial super-strength steel shank and solid tungsten carbide cutter with high hardness and durable.
- APPLICATION EQUIPMENT. This flush trim bit can be used for any flush trim situation and is an excellent choice for pattern or template work, used on table mounted router and hand held router.
- APPLICABLE MATGERIALS. The spiral compression flush trim router bits is perfect for trimming particle board, chipboard, MDF, density board, melamine board, veneer plywood(Laminate) and Solid wood.
- SPETOOL SERVICE. Coming with Storage Case. Good quality, cost-effective, efficient after-sales service, etc.
- Tips. After each use or continuous processing for half an hour, please removel wood chips covering the flush trim bits to extend tool lifespan
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #6
SpeTool 8Pcs Carbide CNC Router Bits Set 1/4 Inch Shank for Woodworking Detail Carving Trimming V Groove Engraving Slotting Mortise
Asin: B08JLB11FV | Model: WD-1 | PartNumber: WD-1
Various Material Fit. This Set Of Router Bit Are Suitable For Aluminum, Copper, Steel, Plywood, Mdf, Hardwood, Softwood, Pvc And Ect..
Specification. Include 8 Pcs Solid Carbide Router Bit With 1/4" Shank Packed In Plastic Box.
Multi-Usage. These Bits Are Suitable For Lettering, Signmaking, Groove And Slots, Mortises, Cycles And Dados, 3D Carving, Can Be Used With Cnc Machine, Hand Hold Router, Table Router And Ect..
Detail Bits. Includes Tapered Bit, Ball Nose Bit, Up/Down Spiral Cnc Router Bit, 60 Degree And 90 Degree V-Groove Bit, O Flute Bit..
Features
- A BEGINNER'S CHOOSE. This set of router bits include various router bit with a low average cost, a must have set for newcomer.
- DETAIL BITS. Includes Tapered bit, Ball Nose bit, up/down Spiral CNC router bit, 60 degree and 90 degree V-groove bit, O flute bit.
- VARIOUS MATERIAL FIT. This set of router bit are suitable for aluminum, copper, steel, plywood, MDF, hardwood, softwood, pvc and ect.
- MULTI-USAGE. These bits are suitable for lettering, signmaking, groove and slots, mortises, cycles and dados, 3D carving, Can be used with CNC machine, hand hold router, table router and ect.
- SPECIFICATION. Include 8 Pcs solid carbide router bit with 1/4 shank packed in plastic box
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #7
SpeTool Carbide O Flute Spiral Router Bit 1/8 Inch Cutting Diameter 1/4 Inch Shank with Coating Acrylic Non-Ferrous Metal CNC Milling Cutter
Asin: B0BN5RWQ75 | Model: SP1F-D1/8-SPE-X | PartNumber: SP1F-D1/8-SPE-X
Unique Design. O-Flute Design Spiral Router Bit Ensures Efficient Chip Removal, Reducing Clogging, Providing Smooth Cutting Performance, And Extending Tool Life;.
Wide Application. Perfect For Cnc Routing, Hobbyist Projects, And Sign Making With Plastic And Non-Ferrous Materials..
Durable And Precise. Single Flute Router Bits, High-Quality Construction Ensures Durability And Precision, Allowing For Consistent And Accurate Cuts..
Applicable Matiarials. Suitable For A Variety Of Materials, Acrylic, Plastic, Aluminum, Copper, And Wood; Used For Carving, Cutting, Slotting, Milling, Hollow Cutting;.
Coating. The New Coating Provide Up To 2.5 Times Life Than The Uncoated, Make The Bit Sturdy Durable, Sharp Efficient, Smooth Stable.
Features
- SPECIFICATION. Spiral Router Bits 3/4" cutting length; 1/8" cutting diameter; 1/4" shank; 2-1/2" overall length, can be used on routers with 1/4" collect;
- COATING. The new coating provide up to 2.5 times life than the uncoated, make the bit sturdy durable, sharp efficient, smooth stable
- UNIQUE DESIGN. O-Flute design spiral router bit ensures efficient chip removal, reducing clogging, providing smooth cutting performance, and extending tool life;
- APPLICABLE MATIARIALS. Suitable for a variety of materials, acrylic, plastic, aluminum, copper, and wood; Used for Carving, Cutting, Slotting, Milling, Hollow Cutting;
- WIDE APPLICATION. Perfect for CNC routing, hobbyist projects, and sign making with plastic and non-ferrous materials.
- DURABLE AND PRECISE. Single flute router bits, high-quality construction ensures durability and precision, allowing for consistent and accurate cuts.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #8
SpeTool 4Pcs/Pack Assorted R0.25~1.0 Tip 1/8" Tapered End Mill Cone Ball Nose Carbide Bit CNC Cutter for Carving Engraving
Asin: B085RG6WLD | Model: 4Pcs-D1/8 | PartNumber: 4Pcs-D1/8
Applicable Materials. Spetool Cnc Carving Bits, Suitable For 2D/3D Carving Hard Wood, Plywood, Soft Wood, Oak, Mdf, Aluminum, Alloy Copper And Acrylic Etc..
Durable And Precise. Spetool Tapered End Mills Deliver Exceptional Durability And Precise Results, Even During Demanding Projects(Long Service Life For Sharpen)..
Wide Application. The Cnc Bits With Ball End Perfect For Cnc Engraving Machine, Woodworking, Metal Engraving, Mold Making, Detail Carving, 2D/3D Engaraving, Fine Detail Work;.
2-Flute Design. Tapered Angle Ball Nose End Mill / Cone Cutters, Super Design For Carving And Clearing Edge; Ball Nose And Spiral Design, Ensuring Smooth And Efficient Cutting Through Various Materials.
Features
- SPECIFICATION. 4PCS tool set-2 flute, 0.25/0.5/0.75/1.0MM ball radius, 15MM CL, 1-1/2" OL, 1/8" shank, TiAIN Coated, 55HRC, can be used on routers with 1/8" collect;
- 2-FLUTE DESIGN. Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge; ball nose and spiral design, ensuring smooth and efficient cutting through various materials
- APPLICABLE MATERIALS. SpeTool CNC Carving bits, suitable for 2D/3D carving Hard wood, Plywood, Soft wood, OAK, MDF, Aluminum, Alloy Copper and Acrylic etc.
- WIDE APPLICATION. The cnc bits with ball end perfect for CNC engraving machine, Woodworking, Metal Engraving, Mold Making, detail carving, 2D/3D engaraving, fine detail work;
- DURABLE AND PRECISE. SpeTool tapered end mills deliver exceptional durability and precise results, even during demanding projects(long service life for sharpen).
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
Dimensions: 0.04 x 1.50 x 0.12 inches
See On Amazon #9
SpeTool 5PCS Spiral Downcut Router Bits 1/4" Shank 1" Cutting Length Solid Carbide CNC Router Bit Set End Mills for Plunge Router Wood Carving
Asin: B0BGGK191Y | Model: SP-D1/4-H1/4 | PartNumber: SP-D1/4-H1/4
Durable And Precise. Spetool Downcut Router Bits Are High-Quality Construction Ensures Durability And Precision, Allowing For Consistent And Accurate Cuts..
2 Flutes. Spiral Bit Design Allows For Efficient Chip Removal, Reducing Heat Buildup, Better Than Straight Bits.
Spetool Service. Good Quality, Cost-Effective, Efficient After-Sales Service, Etc..
Compatibility. This 1/4 Router Bit Set Is Perfect For Soft Woods, Hard Woods, Plywood, Laminate, Oak, Mdf And Any Hardwood Working. It Can Be Used With Cnc Router And Handheld Router With 1/4" Collet..
Down Cut. Spiral Cnc Bits Used For Smoothly Downcut Groove And Slots, Mortises, Cycles And Dados Leave With Clean Edge And Top Surface, Better Than Straight Bits.
Features
- SPECIFICATION. Solid Carbide down cut router bits with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length , can be used on routers with 1/4" collect.
- DOWN CUT. Spiral CNC bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits
- DURABLE AND PRECISE. SpeTool Downcut router bits are high-quality construction ensures durability and precision, allowing for consistent and accurate cuts.
- COMPATIBILITY. This 1/4 router bit set is perfect for soft woods, hard woods, Plywood, laminate, OAK, MDF and any hardwood working. It can be used with cnc router and handheld router with 1/4 collet.
- 2 FLUTES. Spiral Bit Design allows for efficient chip removal, reducing heat buildup, better than straight bits
- SPETOOL SERVICE. Good quality, cost-effective, efficient after-sales service, etc.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #10
SpeTool O Flute CNC Router Bit 1/4 Inch Shank 1 Inch Cutting Length with Extra Long Life Coating Single Flute End Mill for Acrylic Aluminum Wood Cut
Asin: B0B6VNZ6HM | Model: SP1F-D1/4-TaC | PartNumber: SP1F-D1/4-TaC
Unique Design. O-Flute Design Spiral Router Bit Ensures Efficient Chip Removal, Reducing Clogging, Providing Smooth Cutting Performance, And Extending Tool Life;.
Wide Application. Perfect For Cnc Routing, Hobbyist Projects, And Sign Making With Plastic And Non-Ferrous Materials..
Durable And Precise. Single Flute Router Bits, High-Quality Construction Ensures Durability And Precision, Allowing For Consistent And Accurate Cuts..
Applicable Matiarials. Suitable For A Variety Of Materials, Acrylic, Plastic, Aluminum, Copper, And Wood; Used For Carving, Cutting, Slotting, Milling, Hollow Cutting;.
Coating. The New Coating Provide Up To 2.5 Times Life Than The Uncoated, Make The Bit Sturdy Durable, Sharp Efficient, Smooth Stable.
Features
- SPECIFICATION. Spiral Router Bits 1" cutting length; 1/4" cutting diameter; 1/4" shank; 2-1/2" overall length, can be used on routers with 1/4" collect;
- COATING. The new coating provide up to 2.5 times life than the uncoated, make the bit sturdy durable, sharp efficient, smooth stable
- UNIQUE DESIGN. O-Flute design spiral router bit ensures efficient chip removal, reducing clogging, providing smooth cutting performance, and extending tool life;
- APPLICABLE MATIARIALS. Suitable for a variety of materials, acrylic, plastic, aluminum, copper, and wood; Used for Carving, Cutting, Slotting, Milling, Hollow Cutting;
- WIDE APPLICATION. Perfect for CNC routing, hobbyist projects, and sign making with plastic and non-ferrous materials.
- DURABLE AND PRECISE. Single flute router bits, high-quality construction ensures durability and precision, allowing for consistent and accurate cuts.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #11
SpeTool Extra Long Spiral Router Bit Down Cut 1/8 inch Cutting Diameter, 1/4 inch Shank 3 inch OVL HRC55 Solid Carbide End Mill for Wood Cut Carving Engrave
Asin: B091SJV54L | Model: SPLS-D1/4-H1/8-D | PartNumber: SPLS-D1/4-H1/8-D
Durable And Precise. Spetool Downcut Router Bits Are High-Quality Construction Ensures Durability And Precision, Allowing For Consistent And Accurate Cuts..
2 Flutes. Spiral Bit Design Allows For Efficient Chip Removal, Reducing Heat Buildup, Better Than Straight Bits.
Spetool Service. Good Quality, Cost-Effective, Efficient After-Sales Service, Etc..
Compatibility. This 1/8 Router Bit Set Is Perfect For Soft Woods, Hard Woods, Plywood, Laminate, Oak, Mdf And Any Hardwood Working. It Can Be Used With Cnc Router And Handheld Router With 1/4" Collet..
Down Cut. Spiral Cnc Bits Used For Smoothly Downcut Groove And Slots, Mortises, Cycles And Dados Leave With Clean Edge And Top Surface, Better Than Straight Bits.
Features
- SPECIFICATION. Solid Carbide down cut router bits with 1/4inch shank and 1/8inch cutting diameter, 1 inch cutting length, 3 inch for total length , can be used on routers with 1/4" collect.
- DOWN CUT. Spiral CNC bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits
- DURABLE AND PRECISE. SpeTool Downcut router bits are high-quality construction ensures durability and precision, allowing for consistent and accurate cuts.
- COMPATIBILITY. This 1/8 router bit set is perfect for soft woods, hard woods, Plywood, laminate, OAK, MDF and any hardwood working. It can be used with cnc router and handheld router with 1/4 collet.
- 2 FLUTES. Spiral Bit Design allows for efficient chip removal, reducing heat buildup, better than straight bits
- SPETOOL SERVICE. Good quality, cost-effective, efficient after-sales service, etc.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #12
SpeTool CNC Spoilboard Surfacing Router Bit 1/2" Shank 2-1/2" Cutting Diameter,4 Wings Coated Carbide Insert Slab Flatting Router Planer Bit Wood Planing Bit Woodworking Tools
Asin: B0C1TWG4BP
Industrial Grade Design: 1/2" Shank And 2-1/2" Cutting Diameter Solid Steel For Long Lasting And Keep Body Straight.
Used On Cnc And Other Automatic Routers As Well As Hand-Held And Table-Mounted Plunge Routers With Sled For Your Woodworking.
Used On:This Flattening Router Bit Is Perfect For Wood Slab Flattening, Bottom Cleaning, Resurface Or Plane The Top Surface Of Spilboard. Suitable For Soft And Hard Woods, Mdf, Plywood, Laminate, And Etc..
Cost Effective: The Surfacing Router Bit Utilizes 4-Sided Solid Carbide Inserts With Ats Coating Which Provide Heat Resistance And Wear Resistance,Keep Sharp Enseure Great Performance And Provide Up To 2.5X Tool Life . All 4 Edges Fo Inserts Can Be Used. Replace The Inserts When Needed, Instead Of Replacing The Whole Bit. The Inserts Will Be Available On Asin "B0c1tsqljw,B08v8pwl6s".
Features
- FAST CUTTING: this planer router bit designed with 4-wings carbide inserts and 2-1/2" cutting diameter, with 4 -wings carbide inserts( 12mm*12mm*2.2mm,35 degree, straight hole), resulting in more efficient woodworking running.
- COST EFFECTIVE: the surfacing router bit utilizes 4-sided solid carbide inserts with ATS Coating which provide heat resistance and wear resistance,keep sharp enseure great performance and provide up to 2.5X tool life . all 4 edges fo inserts can be used. replace the inserts when needed, instead of replacing the whole bit. the inserts will be available on asin B0C1TSQLJW,B08V8PWL6S
- INDUSTRIAL GRADE DESIGN: 1/2 shank and 2-1/2 cutting diameter solid steel for long lasting and keep body straight
- USED ON:This flattening router bit is perfect for wood slab flattening, bottom cleaning, resurface or plane the top surface of spilboard. suitable for soft and hard woods, MDF, plywood, laminate, and etc.
- Used on CNC and other automatic routers as well as hand-held and table-mounted plunge routers with sled for your woodworking
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #13
SpeTool Spiral Router Bits with DownCut 1/8 inch Cutting Diameter, 1/4 inch Shank CNC Bits Solid Carbide End Mill for Wood Cut, Carving
Asin: B07NVK7CF5 | Model: SPD1/4-1/8-D | PartNumber: SPD1/4-1/8-D
Durable And Precise. Spetool Downcut Router Bits Are High-Quality Construction Ensures Durability And Precision, Allowing For Consistent And Accurate Cuts..
2 Flutes. Spiral Bit Design Allows For Efficient Chip Removal, Reducing Heat Buildup, Better Than Straight Bits.
Spetool Service. Good Quality, Cost-Effective, Efficient After-Sales Service, Etc..
Compatibility. This 1/4 Router Bit Is Perfect For Soft Woods, Hard Woods, Plywood, Laminate, Oak, Mdf And Any Hardwood Working. It Can Be Used With Cnc Router And Handheld Router With 1/4" Collet..
Down Cut. Spiral Cnc Bits Used For Smoothly Downcut Groove And Slots, Mortises, Cycles And Dados Leave With Clean Edge And Top Surface, Better Than Straight Bits.
Features
- SPECIFICATION. Solid Carbide down cut router bits with 1/4inch shank and 1/8inch cutting diameter, 1/2 inch cutting length, 2 inch for total length , can be used on routers with 1/4" collect.
- DOWN CUT. Spiral CNC bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits
- DURABLE AND PRECISE. SpeTool Downcut router bits are high-quality construction ensures durability and precision, allowing for consistent and accurate cuts.
- COMPATIBILITY. This 1/4 router bit is perfect for soft woods, hard woods, Plywood, laminate, OAK, MDF and any hardwood working. It can be used with cnc router and handheld router with 1/4 collet.
- 2 FLUTES. Spiral Bit Design allows for efficient chip removal, reducing heat buildup, better than straight bits
- SPETOOL SERVICE. Good quality, cost-effective, efficient after-sales service, etc.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #14
SpeTool 45 Degree Chamfer Router Bit Forming Edge Treatment CNC Bit 1/4 inch Shank with Bearing for Woodwork
Asin: B0C7FZH57B | Ean: 0792933240324 | UPC: 792933240324
The Carbide Cutter. Solid Carbide Cutter Tip Welding On The Router Bit, Makes Cutting More Efficiency..
For Personal And Industial Use. Premium Carbide Tip And High Quality Steel, Applicable With Cnc Routers, Other Automatic Routers As Well As Hand-Held And Table-Mounted Portable Routers..
Muti Materials Fit. Cuts Almost Composition Materials, Plywoods, Hardwoods, And Softwoods Etc..
Edge Treatment. Spetool Chamfer Or Bevel Edge Bit For Door/ Window Decorative Effect Or Forming Edge Miter Joints.
Features
- DETAIL SIZE. Angle 45 Degree, 7/16 inch Cutting Length, 1/4 inch Shank.
- EDGE TREATMENT. SpeTool Chamfer or bevel edge bit for door/ window decorative effect or forming edge miter joints
- THE CARBIDE CUTTER. Solid carbide cutter tip welding on the router bit, makes cutting more efficiency.
- MUTI MATERIALS FIT. Cuts almost composition materials, plywoods, hardwoods, and softwoods etc.
- FOR PERSONAL AND INDUSTIAL USE. Premium Carbide tip and high quality steel, applicable with CNC routers, other automatic routers as well as hand-held and table-mounted portable routers.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #15
SpeTool O Flute UpCut 1/8" X 1/2" Carbide End Mill Single Flute Spiral CNC Router Bit Aluminum Acrylic Woodworking Cutte
Asin: B08BYLLGHZ | Model: SP1FS-D1/8 | PartNumber: SP1FS-D1/8
Applicable Matiarials. Suitable For A Variety Of Materials, Acrylic, Plastic, Aluminum, Copper, And Wood;.
Durable And Precise. Single Flute Router Bits, High-Quality Construction Ensures Durability And Precision, Allowing For Consistent And Accurate Cuts..
Spetool Service. Good Quality, Cost-Effective, Efficient After-Sales Service, Etc..
Wide Application. Perfect For Cnc Routing, Hobbyist Projects, And Sign Making With Plastic And Non-Ferrous Materials..
Unique Design. O-Flute Design Spiral Router Bit Ensures Efficient Chip Removal, Reducing Clogging, Providing Smooth Cutting Performance, And Extending Tool Life;.
Features
- SPECIFICATION. 1/2" cutting length; 1/8" cutting diameter; 1/4" shank; 2" overall length, can be used on routers with 1/4" collect;
- UNIQUE DESIGN. O-Flute design spiral router bit ensures efficient chip removal, reducing clogging, providing smooth cutting performance, and extending tool life;
- APPLICABLE MATIARIALS. Suitable for a variety of materials, acrylic, plastic, aluminum, copper, and wood;
- WIDE APPLICATION. Perfect for CNC routing, hobbyist projects, and sign making with plastic and non-ferrous materials.
- DURABLE AND PRECISE. Single flute router bits, high-quality construction ensures durability and precision, allowing for consistent and accurate cuts.
- SPETOOL SERVICE. Good quality, cost-effective, efficient after-sales service, etc.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #16
SpeTool 5Pcs Spiral Router Bits UpCut 1/4 inch Cutting Diameter 1/4 inch Shank Router Bit Set HRC55 Solid Carbide CNC End Mill for Woodworking Mortise Slot Carving Engraver
Asin: B09PZSMR7T | Model: W04005 | PartNumber: W04005
Durable And Precise. Spetool Upcut Router Bits Are High-Quality Construction Ensures Durability And Precision, Allowing For Consistent And Accurate Cuts..
2 Flutes. Spiral Bit Design Allows For Efficient Chip Removal, Reducing Heat Buildup, Better Than Straight Bits.
Spetool Service. Good Quality, Cost-Effective, Efficient After-Sales Service, Etc..
Compatibility. This Cnc Router Bit Set Is Perfect For Soft Woods, Hard Woods, Plywood, Laminate, Oak, Mdf And Any Hardwood Working. It Can Be Used With Cnc Router And Handheld Router With 1/4" Collet..
Up Cut. Spiral Bits Used For Smoothly Upcut Groove And Slots, Plunge Mortises, Cycles And Dado With Clean Edge And Bottom, Better Than Straight Bits.
Features
- SPECIFICATION. Solid carbide up cut router bits with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length , can be used on routers with 1/4" collect.
- UP CUT. Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dado with clean edge and bottom, better than straight bits
- DURABLE AND PRECISE. SpeTool Upcut router bits are high-quality construction ensures durability and precision, allowing for consistent and accurate cuts.
- COMPATIBILITY. This CNC Router Bit Set is perfect for soft woods, hard woods, Plywood, laminate, OAK, MDF and any hardwood working. It can be used with cnc router and handheld router with 1/4 collet.
- 2 FLUTES. Spiral Bit Design allows for efficient chip removal, reducing heat buildup, better than straight bits
- SPETOOL SERVICE. Good quality, cost-effective, efficient after-sales service, etc.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #17
SpeTool Spiral Flush Trim Router Bit,1/4 Inch Shank 1-1/8 Inch Cutting Length Extra Long 3 Inch OVL,UP Down Compression Bit for Wood Trimming
Asin: B09VGF71QY | Model: SPTL-D1/4-1/4-U&D | PartNumber: SPTL-D1/4-1/4-U&D
Smooth Stable: The Router Bearing Bit Uses A Double Ball Bearing Pilot At The Tip To Run Against Your Project Template Ensure Smooth Running..
Compatibility: The Spiral Flush Trim Router Bits Is Perfect For Soft Woods, Hard Woods, Plywood, Laminate, Oak, Mdf And Any Hardwood Working. It Can Be Used With Table Mount And Handheld Router With 1/4" Collet..
Tips. After Each Use Or Continuous Processing For Half An Hour, Please Removel Wood Chips Covering The Flush Trim Bits To Extend Tool Lifespan.
Wide Application: This Flush Trim Bit Can Be Used For Any Flush Trim Situation And Is An Excellent Choice For Pattern Or Template Work..
Sharp Efficient: The Flush-Trim Spiral Router Bits Is Sharper And Stay Sharp Longer Than Conventional Flush-Trim Router Bits.Provide Better Chip Evacuation, Less Heat Buildup, And Cleaner Edges..
Features
- Sturdy Durable: The flush cut router bit is made of premium carbide according to stringent Industrial grade quality standards provide tough, resists wear and high cutting performance.
- Sharp Efficient: The flush-trim spiral router bits is sharper and stay sharp longer than conventional flush-trim router bits.provide better chip evacuation, less heat buildup, and cleaner edges.
- Smooth Stable: The router bearing bit uses a double ball bearing pilot at the tip to run against your project template ensure smooth running.
- Wide Application: This flush trim bit can be used for any flush trim situation and is an excellent choice for pattern or template work.
- Compatibility: The spiral flush trim Router Bits is perfect for soft woods, hard woods, Plywood, laminate, OAK, MDF and any hardwood working. It can be used with table mount and handheld router with 1/4 collet.
- Tips. After each use or continuous processing for half an hour, please removel wood chips covering the flush trim bits to extend tool lifespan
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #18
SpeTool 14411 Ball Nose Carbide End Mill CNC Cutter Router Bits Double Flutes Spiral Milling Tool 1/4 inch Shank with 3 inch Over Length
Asin: B07NWJ49TC | Model: P2BL-R1/8 | PartNumber: P2BL-R1/8
For Cnc,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy Etc.
End Mill Bits Are Suitable For Side Milling, End Milling, Finish Machining, Etc..
The Route Bit Suit For Cnc Router And Makita, Bosch, And Any Brand Plunge Router With 1/4" Collet.
Round Top With 2-Flute, Material: Hrc55 Carbide With Tialn Coated.
Features
- Solid Carbide Ball Nose Router Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length
- Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated
- For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc
- The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4 Collet
- End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
Dimensions: 0.04 x 3.00 x 0.25 inches
See On Amazon #19
SpeTool 4 Flutes Ball Nose End Mill Solid Carbide CNC Router Bits 1/4 Inch Shank with 3 Inch Long Spiral Milling Tool
Asin: B07V2ZY5JY | Model: M02005 | PartNumber: M02005
For Cnc, Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy Etc.
End Mill Bits Are Suitable For Side Milling, End Milling, Finish Machining, Etc..
The Route Bit Suit For Cnc Router And Makita, Bosch, And Any Brand Plunge Router With 1/4" Collet.
Round Top With 4-Flute, Material: Solid Carbide With Tialn Coated.
Features
- Solid Carbide Ball Nose CNC Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length
- Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated
- For CNC, Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc
- The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4 Collet
- End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon
Looking For Something Else?
Search