FYSETC 3D Printer QID X-Pro Spring Steel Bed 230 x150mm/9.0x5.9in Double Sides Textured PEI Powder Removable Build Plate with Sticker Base Printing Hotbed Cover for Replicatr QI X-Pro Creator Pro
Asin: B09MLNJR8D
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Made Of High Quality Stainless Steel And Strong Sticker Base. Very Easy To Use, Simply Stick The Bottom Sheet Onto Your Heated Bed, Then Place The Steel Platform On The Top. Flexible And Removable. The Maximum Temperature For Printing Is About 130℃ On The Bed. Just Adjust The Bed Temp According To The Printing Filament..
Prints Come Off The Surface Easily When The Temperature Of The Heated Bed Reaches Room Temperature. If The Print Is Still Stuck, Gentle Flexing Of The Plate Will Help Remove It..
It Behaves As Most Pei Sheets Would And Works Great With Filaments Pla, Tpu, Petg, Abs Etc. Reference Temperature:Pla 50-60℃(Hoted Bed), 200-210℃(Nozzle); Abs 70-120℃(Hoted Bed), 240-250℃(Nozzle);Petg 60-85℃(Hoted Bed), 230-245℃(Nozzle); Carbonfiber 50-60℃(Hoted Bed), 200-220℃(Nozzle); Tpu 50-60℃(Hoted Bed), 200-220℃(Nozzle). If You Need More Adhesion For Tough-To-Stick Filaments Like Nylon, Feel Free To Use Glue Sticks, They Will Wash Off With Water After Use..
Size: 230 X150mm/9.0X5.9 In, Compatible With Qid X-Pro Flashfoge Creator Makebot Replicato 3D Printer Or Other Similarly Sized Build Plate. Please Re-Measure Your Heated Bed Before Ordering, Not Rely On The Build Volume Or Printing Size..
Features
- This textured PEI sheet is combined with 2 parts, a flexible steel platform coated with PEI surface and a bottom sheet with adhesive on the back. The PEI comes pre applied. Both sides can be used freely. A Supplement for sticking PEI kit(Asin: B088ZGTPGB) or Janusbps Kit (Asin:B0B3XC9NGP) at our store.
- Size: 230 x150mm/9.0x5.9 in, compatible with QiD X-pro Flashfoge Creator Makebot Replicato 3D Printer or other similarly sized build plate. Please re-measure your heated bed before ordering, not rely on the build volume or printing size.
- Made of high quality stainless steel and strong sticker base. Very easy to use, simply stick the bottom sheet onto your heated bed, then place the steel platform on the top. Flexible and Removable. The maximum temperature for printing is about 130 on the bed. Just adjust the bed temp according to the printing filament.
- It behaves as most PEI sheets would and works great with filaments PLA, TPU, PETG, ABS etc. Reference Temperature:PLA 50-60 (hoted bed), 200-210 (nozzle); ABS 70-120 (hoted bed), 240-250 (nozzle);PETG 60-85 (hoted bed), 230-245 (nozzle); Carbonfiber 50-60 (hoted bed), 200-220 (nozzle); TPU 50-60 (hoted bed), 200-220 (nozzle). If you need more adhesion for tough-to-stick filaments like Nylon, feel free to use glue sticks, they will wash off with water after use.
- Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
See On Amazon Similar To FYSETC 3D Printer QID XPro
#1
R QIDI TECHNOLOGY 3D Printer Camera for X-Max3/X-Plus3/X-Smart3, Remote Monitoring, Plug and Play, Support Time-Lapse Video,HD Video
Asin: B0CKSG4WZ2 | Model: SXTSMT3 | PartNumber: SXTSMT3 | Ean: 0744581851827 | UPC: 744581851827
【Timelape Function】The Camera Has A Time-Lapse Function That Automatically Creates A Time-Lapse Video Of The Print, Presenting An Innovative Video Of The Printing Process. This Is An Interesting Feature For Users To Record And Share The Entire Printing Process..
【Operating Temperature And Specifications】The Camera's Operating Temperature Range Is From -20°C To 70°C. In Addition, The Camera Has An Effective Focal Length Of 2.3 Mm, A Field Of View Of 130°±15°, And An Aperture Value Of 2.0..
【Easy To Install And Smooth Framerate 】Reserved Interface For Easy Installation. Recommended Frame Rate 5Fps. Its Max Resolution Is Up To 1920*1080 With A Maximum Image Transfer Rate Of 1-30 Fps..
【Remote Monitoring Function】Users Can Monitor The Printing Process Remotely Via The Qidi Slicer Or Klipper Website Console. This Allows The User To View The Print Status In Real Time Without Having To Be Physically Present. And It Is Compatible With Third-Party Remote Control Apps..
Features
- Chamber Camera The camera is an optional upgrade accessory for the QIDI MAX3/PLUS3/SMART3, and the user can choose to install it on the corresponding 3D printer.
- Remote Monitoring Function Users can monitor the printing process remotely via the QIDI Slicer or Klipper website Console. This allows the user to view the print status in real time without having to be physically present. And it is compatible with third-party remote control APPs.
- TIMELAPE FUNCTION The camera has a time-lapse function that automatically creates a time-lapse video of the print, presenting an innovative video of the printing process. This is an interesting feature for users to record and share the entire printing process.
- Easy to Install and Smooth Framerate Reserved interface for easy installation. Recommended frame rate 5FPS. Its max resolution is up to 1920*1080 with a maximum image transfer rate of 1-30 fps.
- Operating Temperature and Specifications The camera's operating temperature range is from -20 C to 70 C. In addition, the camera has an effective focal length of 2.3 mm, a field of view of 130 15 , and an aperture value of 2.0.
- See more on Amazon...
Brand: R QIDI TECHNOLOGY | Manufacturer: Zhejiang Qidi Technology Co.,Ltd
See On Amazon #2
R QIDI TECHNOLOGY 3D Printer Extruder Hot End Fan for X-SMART3/X-PLUS3/X-MAX3 3D Printer
Asin: B0C4SP2K9Y | Ean: 0744581585210 | UPC: 744581585210
Brand: R QIDI TECHNOLOGY | Manufacturer: Wenzhou Xindi New Material Co.,Ltd
See On Amazon #3
FYSETC Anycubi Mega Pro Extruder Cable Replacement: Upgrade 1.3M/51inch 14Pin - 2x7-2.0mm Pitch Extruder Tranfer Board Connecting Wire Compatible with Mega S Mega X Mega 3D Printer Accessory
Asin: B0CKXGCKZ8
【Exquisite Quality】Made Of Individual 24# 11 Plating Tin Copper Wire. 2X7 Pin Array, Wires Are Paralled To Avoid Being Messy. Snap-Lock Connectors, Snap Fits To Oem Sockets, 2.0 Mm Pitch Spacing For Pins. High Quality For Durable And Long-Lasting Use..
【Package Content】1Pc 2X7 Pin Mega V5 J-Head Hotend Board Cable Replacement, 1.3M/51 Inches Length..
【Fix Your Printer Today 】— No More Freezing During Prints!.
【Long Sturdy】 — 1.3M / 51 Inch Long, Much Longer Than The Original Factory-Made Harness, Even Allow To Run Your Z Axis All The Way To The Top And You Will Have No Problems Replacing And Routing The Cable. Much More Flexibility Than The Ribbon Cable That Came With The Printer..
Features
- UPGRADE ANYCUBI REPLACEMENT PART Plug-and-Play, no need any modifications. Replacement extruder cable is ready to go, compatible with Anycubi Mega Pro, Mega S, Mega X, and Mega 3D-printers. NOT compatible with 3d printer Chiron.
- LONG STURDY 1.3M / 51 inch long, much longer than the original factory-made harness, even allow to run your z axis all the way to the top and you will have no problems replacing and routing the cable. Much more flexibility than the ribbon cable that came with the printer.
- EXQUISITE QUALITY Made of individual 24# 11 plating tin copper wire. 2x7 PIN Array, wires are paralled to avoid being messy. Snap-lock Connectors, Snap fits to OEM sockets, 2.0 mm pitch spacing for pins. High quality for durable and long-lasting use.
- FIX YOUR PRINTER TODAY No more freezing during prints!
- PACKAGE CONTENT 1PC 2x7 pin mega V5 J-head hotend board cable replacement, 1.3m/51 inches length.
- See more on Amazon...
Brand: FYSETC | Manufacturer: fuyuansheng
Weight: 58.00 Grams
See On Amazon #4
FYSETC 3D Printer Parts Prusa i3 Mini Heated Bed Thermistor Cartridge Replacement 104NT-4-R025H42G (104GT-2) with 550mm/21.6inch Cable Dupon Connector for Prusa Mini 3D Printer Accessories - Pack of 2
Asin: B0BGRQNSPK
3. Firmware Setting: 104Nt-4-R025h42g(104Gt-2) : 100K Thermistor - Atc Semite 104Gt-2/104Nt-4-R025h42g(Used In Parcan & J-Head) (4.7K Pullup) #Define Temp_Sensor_0 5.
5. Prusa Mini+ Heatbed Thermistor: 550Mm/21.6Inch Long Cable With Dupon Aircraft Connector, Easy To Assemble..
4. High Quality: Durable, Flexible And Long Lasting, Longer Life Span..
2. Made Of Imported Part: 104Nt-4-R025h42g Model Is The 104Gt-2 Thermistor's Upgrade, Newest Model, Which Can Be For 300℃ Long Hours Printing.
Features
- 1. 2pcs prusa mini heat bed thermistor: Prusa mini specific thermistor cartridge, to connect the hot bed, drop-in replacement. Model:104NT-4-R025H42G thermistor
- 2. Made of imported part: 104NT-4-R025H42G model is the 104GT-2 thermistor's upgrade, newest model, which can be for 300 long hours printing
- 3. Firmware setting: 104NT-4-R025H42G(104gt-2) : 100K thermistor - ATC Semite 104GT-2/104NT-4-R025H42G(Used in ParCan & J-Head) (4.7k pullup) #define TEMP_SENSOR_0 5
- 4. High quality: Durable, Flexible and Long Lasting, longer life span.
- 5. Prusa Mini+ heatbed thermistor: 550mm/21.6inch long cable with Dupon aircraft connector, easy to assemble.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
See On Amazon #5
FYSETC 3D Printer Extruder Part - Neptune3 Pro Hotend Print Head Replacement - Neptune3 Plus Max Hot End Accessory: Heat Block Silicone Sock Thermistor with 4PCS MK8 Brass Nozzle for 1.75 Filament
Asin: B0CT8SDJ6L
Wide 3D Printer Material Compatibility: Perfect Nozzle Replacment Kit, Made Of Durable Heat-Resisted And Abrased-Resisted Brass, For Long-Lasting And Corrosion-Resistant, Which Makes The Print Head Works With Most 1.75 Mm Filament, Such As Pla/Abs/Petg/Tpu/Wood..
Easy Installation: Remove The Old Exturder Head And Install The New Hot End. After That, Use The Auto Bed Leveling Kit To Adjust The Distance Between The Nozzle And 3D Printing Hot Bed..
High Quality: The Kit Adopts High-Quality Throat That Can Withstand High Temperature Of 300 Degrees Celsius, Which Is Durable And Provides Stable Printing Quality. With Outstanding Heat Dissipation. The Seamless Connection Between The Nozzle And Heat Breakage Accelerates The Nozzle To Dissipate Heat, And The Heat Breakage To Insulate, And Releases The Nozzle Blockage..
Package Included: This Hotend Radiator Replacement Kit Contains Heating Block, 24V 40W Heating Rod, Ntc100k 3950 Thermistor, Heatbreak Throat, Tef-Lon Ptfe Tube, Silicone Cover And 4 Pcs 0.4Mm Brass Nozzles, Not The Chtt Nozzle. Easy To Assemble With 3D Printer Tools Kit.(You Need To Assemble It Yourself).
Features
- Applicable FDM 3D printer: This is a 3d printer DIY hotend part for ELEGO Neptune3 Pro/Neptune3 Plus/Neptune3 Max in the event that something happens to the stock on the machine, NOT fit Neptune4 / 4 Pro, Neptune4 Plus / Max.
- Package Included: This hotend radiator replacement kit contains heating block, 24V 40W heating rod, NTC100k 3950 thermistor, heatbreak throat, tef-lon ptfe tube, silicone cover and 4 pcs 0.4mm brass nozzles, not the CHTt nozzle. Easy to assemble with 3d printer tools kit.(You need to assemble it yourself)
- Wide 3D printer material Compatibility: Perfect Nozzle Replacment Kit, Made of durable heat-resisted and abrased-resisted brass, for long-lasting and corrosion-resistant, which makes the print head works with most 1.75 mm filament, such as PLA/ABS/PETG/TPU/Wood.
- High Quality: The kit adopts high-quality throat that can withstand high temperature of 300 degrees Celsius, which is durable and provides stable printing quality. With outstanding heat dissipation. The seamless connection between the nozzle and heat breakage accelerates the nozzle to dissipate heat, and the heat breakage to insulate, and releases the nozzle blockage.
- Easy Installation: Remove the old exturder head and install the new hot end. After that, use the auto bed leveling kit to adjust the distance between the nozzle and 3d printing hot bed.
- See more on Amazon...
Brand: FYSETC | Manufacturer: fuyuansheng
See On Amazon #6
FYSETC 3D Printer Flashfoge Creater Pro 2 Build Plate Double-Sided Flexible Spring Steel-Textured PEI + PET-CF Coating with Sticker Base 230x150mm/9.0x5.9 inch for QID X-pro Printing Hotbed Cover
Asin: B0BKPNKWP5
【Wide Compatibility】:No Glue, No Tap, Compatible With Various Kinds Of Filaments, Such As Pla, Petg, Abs, Tpu, Tpe, Hips, Pa-Cf, Wood Etc. The Adaptation Temperature Of Different Materials Is Different, Please Adjust It Reasonably. Reference Bed Temperature: Pla(50-65℃), Petg(70-80), Tpu(60-70), Abs(90-100, Recommend On The Gold Side). Note: Please Keep Nozzle Not Directly Touch To Avoid Scratch Or Permization..
【Practical Features】:Size:230X150mm/9X5.9Inch, Suitable For Qid X-Pro/ Creattor Pro Or Other 3D Printers With The Same Size Hotbed, Not Relying On The Machine's Printing Volume. Please Measure The Size Of Your Printing Platform Before Purchasing..
【Good Quality】: Plate: Made Of High Quality Stainless Steel, Flexible, Removable, High Strength And Heat Resistance, Three-Layer Design, Thicker And More Durable. Textured Pei Powder Side Can Easily Handle Temperatures Up To 190°C And Carbonfiber Side Can Bear Temp About 100℃. It's Easy To Remove The Printed Matter From The Platform By Bending Slightly. Through Hundreds Of Experimental Tests, Repeated Use Is Still As New..
【Specail Design】Double-Sided Build Plate Is One Side Textured Pei Powder(Gold) + One Side Coated Pet-Carbonfiber Sheet, Gives You Two Different Experiences On One Plate Just By Flipping It Over. The Pet-Cf Surface Has Grids To Help Observe Nozzle Positioning Easily. This New Plate Is High-Temperature Resistant, Good Printing Adhesion, Especailly For Abs Filament Which Is Not Easy To Print..
Features
- Upgrade Experience : A new kind Double-sided 3d printing platform-- PEI Textured Side+ PET-CF Coated Sheet , comes with a sticker base +2Pcs sandpapers. Nice and flat. PETG works better on the rough side, PLA prints great on either side. The pattern that gets transferred is very cool.
- Specail Design Double-sided Build Plate is One side textured pei powder(Gold) + One side coated PET-Carbonfiber sheet, gives you two Different experiences on one plate just by flipping it over. The PET-CF surface has grids to help observe nozzle positioning easily. This new plate is High-temperature resistant, good printing adhesion, especailly for ABS filament which is not easy to print.
- Wide Compatibility :No glue, No tap, Compatible with various kinds of filaments, such as PLA, PETG, ABS, TPU, TPE, HIPS, PA-CF, WOOD etc. The adaptation temperature of different materials is different, please adjust it reasonably. Reference bed temperature: PLA(50-65 ), PETG(70-80), TPU(60-70), ABS(90-100, recommend on the Gold side). Note: Please keep nozzle not directly touch to avoid scratch or permization.
- Good Quality : Plate: made of high quality stainless steel, Flexible, removable, high strength and heat resistance, Three-Layer design, thicker and more durable. Textured PEI Powder side can easily handle temperatures up to 190 C and Carbonfiber side can bear temp about 100 . It's easy to remove the printed matter from the platform by bending slightly. Through hundreds of experimental tests, repeated use is still as new.
- Practical Features :Size:230x150mm/9x5.9inch, suitable for Qid X-pro/ Creattor Pro Or other 3D printers with the same size hotbed, not relying on the machine's printing volume. Please measure the size of your printing platform before purchasing.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
See On Amazon #7
FYSETC 24V Air Purifier for 3D Printer Ender 3 Cover : Assembled HEPA Air Cleaner with Cool Fan Activated Carboon Pack for Ender 3 S1 Pro CR-10S Vype Ender 5 Plus Enclosure or QID X-Pro Box Structure
Asin: B0CGHSDLHN
A Complete Set Of Printed Parts: A Full Kit Comes In The Box, Including The 3D Printable Parts( With Our Logo Fysetc On, You Can Identify The Direction), 1* 60X60x25mm Fan, 2*Activated Carboon Pack, 2*Filter Screens, And Almost Preassembled, Black. You Just Need To Assemble The Feet In The Way You Want, 2 Ways Exist, Facing Inward Or Outward. Compact Size: About 6.7X6.7X12.5Cm( In A Vertical Position), Cable Length About 1.1M/43.3Inch..
Convinet To Replace: Due To The Product Characteristics, Charcoall Bags Can Last For About 3 Months Normally. Kindly Advise To Replace Them In Time To Get A Better Purifying Effect. Easy Replacement..
Easy To Use: After Installing The Feet, You Just Connnect The Cable To Your 3D Printer Controller Board Power Socket. Then Press The Button On/Off To Operate It..
Efficient Filtration System: Our Air Purifier Uses A Big Fan 60X60x25mm, 24V Dc 0.15A, Powerful And Fast Speed, And Includes 2 Activated Carboon Packs, Which Can Effectively Removle Room 99.97% 0.1 Microns, Such As Smoke, Dust And Smell, Ensuring A User-Friendly Envoironment And Enhancing The Printing Experience. It Does A Good Job At Reduccing The Abs Smell Or Other 3D Printing Material Diffused Odor While Working..
Features
- Model Name: Universal 3d printer air purifier works for FDM 3D Printers with a dust cover, such as Ender 3 Pro / ELEGOONeptune 3 Pro / Ender 3 V2 Neo / AnycubicVyper / Kobrra Neo / Voxlab AquilaX2 / Ender 5 S1 or Prusa i3 MK3S+ Enclosure, as well as box structure 3d printers, Qid i fast / X-Max etc, or other machine you want to have a try.
- Efficient Filtration System: Our air purifier uses a big fan 60x60x25mm, 24V DC 0.15A, powerful and fast speed, and includes 2 activated carboon packs, which can effectively removle room 99.97% 0.1 Microns, such as Smoke, dust and Smell, ensuring a user-friendly envoironment and enhancing the printing experience. It does a good job at reduccing the ABS smell or other 3d printing material diffused odor while working.
- A Complete Set of printed parts: A full kit comes in the box, including the 3D printable parts( with our Logo FYSETC on, you can identify the direction), 1* 60x60x25mm fan, 2*activated carboon pack, 2*filter screens, and almost preassembled, Black. You just need to assemble the feet in the way you want, 2 ways exist, facing inward or outward. Compact Size: about 6.7x6.7x12.5cm( in a vertical position), cable length about 1.1m/43.3inch.
- Easy to use: After installing the feet, you just connnect the cable to your 3d printer controller board Power socket. Then press the button ON/OFF to operate it.
- Convinet to replace: due to the product characteristics, charcoall bags can last for about 3 Months normally. Kindly advise to replace them in time to get a better purifying effect. Easy replacement.
- See more on Amazon...
Brand: FYSETC | Manufacturer: fuyuansheng
Dimensions: 4.92 x 2.64 x 2.64 inches | Weight: 245.00 Grams
See On Amazon #8
FYSETC Prussa MK3 MK3S Upgrade 3D Printer Parts Y-axis Linear Rail Guide Set Length 330mm/13inch Support Mod with Slide Block for Prus i3 Mk3s 3D Printer -Pack of 2
Asin: B0BBF1J2NQ
High Quality: Professional And Technical Rail And Block, Strong And Durable. Easy To Install Or Remove..
Package Listing: Only Includes 1 Set Y Axis Linear Rail Guide Set (2Pcs), Not Include The Printed Parts. We Also Have The Y Axis Linear Rail Guide Set, Please Search It At Our Store. Kind Tips: Please Wear Gloves Before Installation To Avoid Hands Touching The Guide Rails And Making Them Rusty..
Good Performance: High Accuracy And Stable Performance, Can Work Fluently. The Slider Could Easily And Lightly Move For Convenient Use..
Size:330Mm/13Inch, Small Size, Light Weight But Durable..
Features
- Application: Upgrade Y axis Linear Rail Guide with Slide Block and Screw Nuts, suitable for most automatic equipment. A great replacement replacement or DIY accessories for Prus MK3/ MK3S 3D Printer.
- Size:330mm/13inch, Small size, light weight but durable.
- High Quality: Professional and technical rail and block, strong and durable. Easy to install or remove.
- Good Performance: High accuracy and stable performance, can work fluently. The slider could easily and lightly move for convenient use.
- Package listing: Only includes 1 Set Y axis Linear Rail Guide Set (2PCS), not include the printed parts. We also have the Y axis linear rail guide set, please search it at our store. Kind tips: Please wear gloves before installation to avoid hands touching the guide rails and making them rusty.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
See On Amazon #9
FYSETC 3D Printer Accessories - Anycubicc Kobra2 Go Neo Pro Plus Extruder Hotend Replacement Nozzle - 0.4mm Metal Brass: Apply for Almost Filament PLA ABS PETG Wood TPU ASA 5Pcs
Asin: B0CQF668R6
3. Necessary Print Head, No Need To Change The Entire Hot End Kit. Easy To Install, Just Remove The Silicone Sock, Use A Wrench To Unscrew The Nozzle From The Heating Block, Replace New, Relevel, And Print Well, Smooth Printing Filament Feeding. After The New Nozzle Is In, You Need To Adjust Your Z-Offset..
5. What You Get: Original 5Pcs Brass Nozzle 0.4Mm For Kobra2 Print Head, Neither Include Ptfe And Needle, Nor 0.6 0.8 1.0Mm..
4. Material: Metal Brass, Not Hardened Steel. Print Well, Apply For Almost 3D Printing Material..
2. Longer Thread, Not Shorter. So Only Apply For Kobra2 Printing Project, Not For Vyperr Megaa Ender 3 Neo 5 Pro Plus Neptune3 4 Adventure4 Voro2.4 R2 Tina2 Tevo X5sa Q5 Qq-S X-Plus A20 A30 Lk4 Lk5 Sidewinde X2 X1 P1s P1p A6 A8 Tornadoo B1 B2 Se Taz6 Mp10 Delta 3D45 3D40 3D20 I3 Mk3s+ Mk4 Sv06 Sv07 Xy-3 Se Et5x Etc, These Need Mk8 V6 K1 Chtt Or Other Size Nozzle..
Features
- 1. If run your Kobra2 series printer A LOT, have some spare nozzles around: when you start getting craters/boils/pinholes in the top layer or clogged then it s time to change the nipple. Directly drop in your kobra2 printer stock hot end heater block, no more clogging or leak.
- 2. Longer thread, not shorter. So Only apply for Kobra2 printing project, not for vyperr megaa ender 3 neo 5 pro plus neptune3 4 adventure4 voro2.4 r2 tina2 tevo X5SA Q5 QQ-S X-Plus A20 A30 LK4 LK5 Sidewinde X2 X1 P1S P1P A6 A8 Tornadoo B1 B2 SE TAZ6 MP10 Delta 3D45 3D40 3D20 i3 MK3S+ MK4 SV06 SV07 XY-3 SE ET5X etc, these need mk8 v6 k1 CHTT or other size nozzle.
- 3. Necessary print head, no need to change the entire hot end kit. Easy to install, just remove the silicone sock, use a wrench to unscrew the nozzle from the heating block, replace new, relevel, and print well, Smooth Printing filament feeding. After the new nozzle is in, you need to adjust your z-offset.
- 4. Material: metal brass, not hardened steel. Print well, apply for almost 3D printing material.
- 5. What you get: original 5Pcs Brass nozzle 0.4mm for Kobra2 print head, neither include PTFE and needle, nor 0.6 0.8 1.0mm.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
See On Amazon #10
FYSETC 3D Printer QID Extruder Part - Hot End V6 Nozzle Adapter - High Flow Plated Copper Converter: Easy Install ZS Nozzle on X-Max3 X-Plus3 X-Smart3 Hotend Heater Block for Filament PLA PETG ABS
Asin: B0D3F4P8RL
3. Product Process: Cnc, Max Printing Temp:550℃. Size: M6 X 6.5Mm..
5. Package Contents: Adapter X 2Pcs; Hexagon Wrench X 2Pcs; Not Include V6 Zs Nozzle..
4. Easy Installation: Screw Hexagonal Bore With The Wrench Into The Print Head Throat Pipe Tightly To Avoid 3D Printing Material Leaking, Then Tighten The V6 Nozzle On. Simple And Convenient..
2. High Quality: Made By High-Precision Cnc Machine, Plated Copper. The Thermal Conductivity Of Copper Is Three Times That Of Brass, Can Guarantee An Excellent Thermal Conductivity From Your 3D Printer's Heater Block To The Nozzle. Its Inner Wall Is Smooth Without Burrs And The Surface Is Nickel-Plated To Increase Non-Stick Properties..
Features
- 1. Product Name: 2pcs Adapters for 3D Printer QI-DI Hotend, compatible with QID X-Max 3/X-Plus 3/X-Smart 3 print head to install V6 style nozzles. In this way, you can use a wide range of V6 nozzles(0.4mm 0.2mm 0.6mm 0.8mm) to reduce costs, such as V6 ZS nozzle, Volcan Brass nozzle, Ruby Tip nozzle, Hardened steel extruder nozzle, etc.
- 2. High Quality: Made by high-precision CNC machine, plated Copper. The thermal conductivity of copper is three times that of brass, can guarantee an excellent thermal conductivity from your 3D Printer's heater block to the nozzle. Its inner wall is smooth without burrs and the surface is nickel-plated to increase non-stick properties.
- 3. Product Process: CNC, max printing temp:550 . Size: M6 x 6.5mm.
- 4. Easy installation: Screw Hexagonal bore with the wrench into the print head throat pipe tightly to avoid 3d printing material leaking, then tighten the v6 nozzle on. Simple and convenient.
- 5. Package Contents: Adapter x 2pcs; Hexagon wrench x 2PCS; not include V6 ZS nozzle.
- See more on Amazon...
Brand: FYSETC | Manufacturer: fuyuansheng
Weight: 0.00 pounds
See On Amazon #11
FYSETC Neptune3 Pro 3D Printer Accessories - Hotend Adapter Board Replacement - Hot End Nozzle Breakout Module: Connect Heater Thermistor Limit Switch Fan Extruder Motor on Elego Neptune3 Plus Max
Asin: B0D264LVVZ
3. Simple And High Quality: Made Of Quality Multi-Layer Board Material. Connectors Are Installed Well Onto The Board, Soldering Looks Good And Works Just Like The Stock One. Intelligent And High Precision For Control. And The Connecting Holes Match Up Perfectly..
5. Package Content: 1Pc Hotend Adapter Board, Color: Green..
4. Quick Installation: Easy To Install And Maintain, No Need To Disassemble The 3D Printer, Easy To Use, Plug And Play, No Modification. Marks On The Pcb Hot End Board Help Easily To Connect The Necessary 3D Printer Accessories..
2. Professional 3D Printer Transfer Board: This 2X10 Pin Printhead Adapter Board Is Designed To Make Wiring The Hot End Of 3D Printer Easier To Help Eliminate The Need For Some Crimping On The Cable, Small Integrated Board For Connecting Heating Element, Cooling System, Temperature Sensor Cable, Nema 17 E Motor Together, Make The Print Head Looks Clean And Easy To Handle..
Features
- 1. Compatible with FDM 3D Printer: A must-have 3d printing part to replace the original extrusion board or diy a new dual gear direct drive extruder. It works well as a replacement hotend board not only on Neptune3 pro, but also on Elego Neptune3 Plus / Neptune3 Max 3d printers. Please note NOT for Neptune4 - Neptune4 Pro - Neptune4 Plus or Neptune4 Max or other 3d printer models. Please confirm your 3d printer model before ordering.
- 2. Professional 3D Printer Transfer Board: This 2x10 pin printhead adapter board is designed to make wiring the hot end of 3D printer easier to help eliminate the need for some crimping on the cable, small integrated board for connecting heating element, cooling system, temperature sensor cable, Nema 17 E motor together, make the print head looks clean and easy to handle.
- 3. Simple and High Quality: Made of quality multi-layer board material. Connectors are installed well onto the board, soldering looks good and works just like the stock one. Intelligent and high precision for control. And the connecting holes match up perfectly.
- 4. Quick Installation: Easy to install and maintain, no need to disassemble the 3d printer, easy to use, plug and play, no modification. Marks on the pcb hot end board help easily to connect the necessary 3d printer accessories.
- 5. Package content: 1pc hotend adapter board, color: Green.
- See more on Amazon...
Brand: FYSETC | Manufacturer: fuyuansheng
Weight: 0.03 pounds
See On Amazon #12
FYSETC 3D Printer Prusa Mini Heat Bed Thermistor Replacement 104NT-4-R025H42G (104GT-2) 2PCS and Upgraded Textured - PEY Build Plate 196.3x190mm 3D Printing Platform
Asin: B0CKYQ5B9K
【Firmware Setting】104Nt-4-R025h42g(104Gt-2) : 100K Thermistor - Atc Semite 104Gt-2/104Nt-4-R025h42g(Used In Parcan & J-Head) (4.7K Pullup) #Define Temp_Sensor_0 5.
【Wide 3D Printing Material Compatibility】Support Various 3D Printer Filaments. After Testing, We Recommend The Pey Layer To Print Pla/ Tpu/ Petg (Temp Suggestion: 50°C-70°C, ≤90°C). The Textured Pei Plate Print Pla/ Pla-Cf/ Petg/ Pc/ Abs/ Tpu/ Nylon Etc. Printing Model Is Easy To Adhere On Pei Bed, Has A Great Adhesion, And Easy To Be Removed , Just Flex Slightly To Pop Your Prints Right Off. In Some Cases, Remove The Model Directly Without Taking The Spring Plate From Printing Bed..
【Upgrade Prusa Mini+ Part】A New Double Sided Heated Bed Sheet: Smooth Pey+Textured Pei. One Side Is A Textured Pei Bed Which Presents The Frosted Surface With A Distinctive Frosted Touch. Another Side Is Coated With A Smooth Pey Sheet Which Has A Starry & Fine Sequins Pattern That Shines Brightly. The Most Important Thing, The Stars And Dots Pattern Will Be Left On The Printing Model, Which Brings Endless Fun To Your 3D Printing. How Beautiful And Magical!.
【Made Of Imported Part】 104Nt-4-R025h42g Model Is The 104Gt-2 Thermistor's Upgrade, Newest Model, Which Can Be For 300℃ Long Hours Printing.
Features
- 2 Pack of 3D Printer Prusa mini specific thermistor cartridge, to connect the hot bed, drop-in replacement. Model:104NT-4-R025H42G thermistor
- Made of imported part 104NT-4-R025H42G model is the 104GT-2 thermistor's upgrade, newest model, which can be for 300 long hours printing
- Firmware setting 104NT-4-R025H42G(104gt-2) : 100K thermistor - ATC Semite 104GT-2/104NT-4-R025H42G(Used in ParCan & J-Head) (4.7k pullup) #define TEMP_SENSOR_0 5
- Upgrade Prusa mini+ Part A new Double Sided heated bed sheet: Smooth PEY+Textured PEI. One side is a textured PEI bed which presents the frosted surface with a distinctive frosted touch. Another side is coated with a smooth PEY sheet which has a Starry & Fine Sequins pattern that shines brightly. The most important thing, the Stars and Dots pattern will be left on the printing model, which brings endless fun to your 3d printing. How Beautiful and Magical!
- Wide 3D Printing Material Compatibility Support various 3d printer filaments. After testing, we recommend the PEY layer to print PLA/ TPU/ PETG (Temp Suggestion: 50 C-70 C, 90 C). The textured PEI plate print PLA/ PLA-CF/ PETG/ PC/ ABS/ TPU/ Nylon etc. Printing model is easy to adhere on PEI bed, has a great adhesion, and easy to be removed , just flex slightly to pop your prints right off. In some cases, remove the model directly without taking the spring plate from printing bed.
- See more on Amazon...
Brand: FYSETC
See On Amazon
Looking For Something Else?
Search