BaiNuo 3 inch Nylon Filament Abrasive Wire Cup Brush Wheel for Drill, 1/4'' Round Shank Nylon Brushes Paint Remover for Metal Plastic Wood Polishing 3Pack (80/120/320 Grit
Asin: B09N8NXRMK | Ean: 0607029600077 | UPC: 607029600077
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Flexible Design】1/4" Round Handle Paint Brush Cup Wheel Is Suitable For Most Drill Bits, Maximum Speed: 4,500Rpm; Suitable For Wet And Dry Applications Such As Metal, Wood, Plastic, Aluminum, Stone, Etc. It Is Safe And Easy To Rust, Paint And Clean..
【Application】Nylon Brush For Drill Are Widely Used In Woodworking, Furniture, Mahogany Furniture, Three-Plywood Surface Finishing, Prominent Processing Of Complex Furniture Wood Grain, Hyperboloid, Concave And Convex Surfaces, And Various Surfaces Can Be Fully And Evenly Polished..
【Superior Performance】Nylon Cup Brushes Has High Acid And Alkali Resistance, Good Chemical Resistance To Organic Solvents, And Does Not Damage The Original Surface Light Melting; The Bristles Have Low Water Absorption, Suitable For Grinding Under Dry And Wet Conditions, Continuous Filament, And Wear-Resistant..
【Excellent Material】It Is Made Of Imported High-Density Alumina Abrasive Wire, Combined With 20-40% Abrasives, And Has A Long Service Life; Nylon Bristle Brush Has The Characteristics Of High Strength, High Melting Point, Chemical Resistance, Toughness And So On..
Features
- PACKAGE INCLUDED 3Pcs Nylon drill brush set contains (1PC Red-80#, 1PC Gray-120# ,1PC Blue-240#), Size: 3''(75mm) Diameter wheel; 1/4-inch shank; 3 different grit of these abrasive brush to meet different grinding requirements.
- EXCELLENT MATERIAL It is made of imported high-density alumina abrasive wire, combined with 20-40% abrasives, and has a long service life; Nylon Bristle Brush has the characteristics of high strength, high melting point, chemical resistance, toughness and so on.
- FLEXIBLE DESIGN 1/4 round handle paint brush cup wheel is suitable for most drill bits, maximum speed: 4,500RPM; suitable for wet and dry applications such as metal, wood, plastic, aluminum, stone, etc. It is safe and easy to rust, paint and clean.
- SUPERIOR PERFORMANCE Nylon cup brushes has high acid and alkali resistance, good chemical resistance to organic solvents, and does not damage the original surface light melting; the bristles have low water absorption, suitable for grinding under dry and wet conditions, continuous filament, and wear-resistant.
- APPLICATION Nylon brush for drill are widely used in woodworking, furniture, mahogany furniture, three-plywood surface finishing, prominent processing of complex furniture wood grain, hyperboloid, concave and convex surfaces, and various surfaces can be fully and evenly polished.
- See more on Amazon...
Brand: BaiNuo | Manufacturer: NUODUN
See On Amazon Similar To BaiNuo 3 inch Nylon Filament
#1
OVERTURE Nylon Filament 1.75mm 3D Printer Filament, Polyamide (PA) 1kg Spool (2.2lbs), Dimensional Accuracy +/- 0.02 mm, Fit Most FDM Printer (Black)
Asin: B087R3M9Z2 | Model: OVA175 | PartNumber: OVA175 | Ean: 0810031292233 | UPC: 810031292233
【More Humanized Design & Easy To Use】 Grid Layout On The Surface For Easy Resizing; With Length/ Weight Gauge And Viewing Hole On The Reel So That You Can Easily Figure Out The Remaining Filaments; More Filaments Clip Holes For Fixing Purpose On The Reel; Larger Spool Inner Diameter Design Makes Feeding Smoother.
【Risk-Free & Lifetime Guarantee】 Discover Worry-Free 3D Printing With Overture Filament—Backed By Our Lifetime Satisfaction Guarantee. No Matter The Challenges, We're Here To Support You For A Seamless 3D Printing Experience. Trust Overture As Your Dependable Supplier Of 3D Printing Filaments And Accessories.
【Dimensional Accuracy & Consistency】 Advanced Ccd Diameter Measuring And Self-Adaptive Control System In The Manufacturing Guarantee These Nylon Filaments Of 1.75 Mm Diameter, Accuracy +/- 0.02 Mm; 1 Kg Spool (2.2Lbs).
【High Stability And Durability】 Overture Filament Is Based On A Copolymer Of Nylon 6 And Nylon 6.6, A Strong And Tough Thermoplastic Polymer. Great For Creating Parts Which Needs To Be Strong And Durable. These Nylon Filaments Are Excellent Choice For Engineering Production Or Prototyping. Pva Glue Is Always Required For Better Adhesion.
Features
- Odorless & Zero Warping This CoPA filament combines excellent strength, toughness, and heat resistance up to 180 C. It delivers excellent printing quality with no Odor or warpage during printing. As the Nylon material is sensitive to moisture, please remember to put it back into a transparent bag
- High Stability and Durability OVERTURE filament is based on a copolymer of Nylon 6 and Nylon 6.6, a strong and tough thermoplastic polymer. Great for creating parts which needs to be strong and durable. These Nylon filaments are excellent choice for engineering production or prototyping. PVA glue is always required for better adhesion
- More Humanized Design & Easy to Use Grid layout on the surface for easy resizing; with length/ weight gauge and viewing hole on the reel so that you can easily figure out the remaining filaments; more filaments clip holes for fixing purpose on the reel; Larger spool inner diameter design makes feeding smoother
- Dimensional Accuracy & Consistency Advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these Nylon filaments of 1.75 mm diameter, Accuracy +/- 0.02 mm; 1 kg spool (2.2lbs)
- Risk-Free & Lifetime Guarantee Discover worry-free 3D printing with Overture filament backed by our lifetime satisfaction guarantee. No matter the challenges, we're here to support you for a seamless 3D printing experience. Trust Overture as your dependable supplier of 3D printing filaments and accessories
- See more on Amazon...
Brand: OVERTURE | Manufacturer: OVERTURE
Weight: 2.20 pounds
See On Amazon #2
Kingroon Nylon 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool(2.2lbs), 1.75 mm, Black
Asin: B0C9QG5PTL | Ean: 0749684723903 | UPC: 749684723903
Neat Lines & Moisture Free: Nylon Filament 1.75Mm Comes In A Vacuum-Sealed Nylon Vacuum Bag With Desiccant..
Excellent Service: Kingroon Is A Customer-Centric Company, We Have Been Committed To Providing Customers With Good Service, If You Have Any Questions, Please Do Not Hesitate To Contact Us At Any Time, We Will Try Our Best To Solve Your Problems..
Our Suggestion: Please Pass The Filament Through The Fixing Hole After Use To Avoid Tangling. First Of All, The Hot Bed Temperature Is Recommended To Be Selected At 90°C - 110°C, While A Thin Layer Of Glue Is Applied On The Printing Platform Using A Pva-Based Glue Stick. The Warping Will Be Effectively Suppressed..
Excellent Mechanical Properties And Heat Resistance: Nylon Filament 1.75 Mm Black Is An Indispensable Structural Material With High Heat Resistance And Good Impact Resistance. 3D Printed Nylon Black Is Suitable For Producing Durable Parts With Glossy Surfaces And High Resistance To Fracture..
Features
- More Reliable Stability: nylon filament is more reliable and easier to print with low moisture absorption and good adhesion to substrates. It has lower moisture absorption and longer shelf life, and a much lower melting temperature (185 C) than conventional nylon consumables.
- Excellent Mechanical Properties and Heat Resistance: Nylon Filament 1.75 mm Black is an indispensable structural material with high heat resistance and good impact resistance. 3D printed Nylon Black is suitable for producing durable parts with glossy surfaces and high resistance to fracture.
- Neat Lines & Moisture Free: Nylon filament 1.75mm comes in a vacuum-sealed nylon vacuum bag with desiccant.
- Our Suggestion: Please pass the filament through the fixing hole after use to avoid tangling. First of all, the hot bed temperature is recommended to be selected at 90 C - 110 C, while a thin layer of glue is applied on the printing platform using a PVA-based glue stick. The warping will be effectively suppressed.
- Excellent service: Kingroon is a customer-centric company, we have been committed to providing customers with good service, if you have any questions, please do not hesitate to contact us at any time, we will try our best to solve your problems.
- See more on Amazon...
Brand: Kingroon | Manufacturer: Kingroon
Weight: 2.87 Pounds
Warranty: 1 Year
See On Amazon #3
YXPOLYER Super Tough Easy Print Nylon Filament,1.75mm 3D Printer Engineering Filament, Nylon 3D Printer Filament Strong, Heat Resistant, Good Abrasion, 1kg Spool (2.2lbs), Black
Asin: B0B19FNFVG | Model: filament 1.75 nylon | PartNumber: filament 1.75 nylon
【Widely Applications Of Yxpolyer Pa Filament】Nylon Lends Itself Well To Things Like Living Hinges And Other Functional Parts. Yxpolyer Nylon Filament 1.75Mm Is Super Tough, High-Strength And High Wear Resistance, So This Nylon Printer Filament Is Suitable For Automotive Industry Signal Lamp Bases, Fuel Dispensers, Surface Mount Devices In The Electronics And Electrical Markets, And Household Products, Etc.
【Dimensional Accuracy & Consistency Nylon Filament 1.75】Yxpolyer 3D Printer Nylon Filament Dimensional Accuracy ± 0.04 Mm. Yxpolyer Nylon Printer Filament Has Wide Compatibility Due To The Small Diameter Error, 1.75 Nylon Filament Is Suitable For Almost All 1.75Mm Fdm 3D Printers. (We Recommend Print The Nylon Filament At A Printing Temperature Of 230℃-250℃, Bed Temperature Of 80-100°C). 3D Printer Solid Glue Is Always Required For Better Adhesion.
【Odorless & Well Package Nylon Filament】Our Nylon Filament 1.75Mm Is A High-Strength Modified Nylon Printing Material So This Nylon Filament 1.75 Delivers Excellent Printing Quality With No Order During Printing. The Package Of This Nylon Filament Is Vacuum Sealed With Semi-Aluminum Foil Bags With Desiccant, Which Can Better Isolate Air And Water Molecules. As The Nylon Material Is Sensitive To Moisture, Please Remember To Put This Nylon Filament 1.75Mm Back Into A Vacuum Bag.
【High Abrasion Resistance Nylon Filament】Yxpolyer Nylon Filament Has Excellent Abrasion Resistance And Resists Damage Caused By Abrasion And Friction. Also This Nylon Filament 1.75 Has A Low Coefficient Of Friction, Reducing Energy Loss And Heat Generated By Friction. Good Corrosion Resistance To Various Chemical Substances, This Nylon 3D Printer Filament 1.75 Can Work Under Harsh Environmental Conditions.
Features
- Heat Resistance Easy Print Black Nylon Filament YXPOLYER nylon 3D printer filament has excellent mechanical properties, super tough and impact strength which is more than 10 times that of ordinary PLA. This nylon filament 1.75mm has excellent temperature resistance, melting temperature up to 194 .(This 3d printer nylon filament is recommended to bake at 80 C for at least 7 hours before first print!)
- High Abrasion Resistance Nylon Filament YXPOLYER nylon filament has excellent abrasion resistance and resists damage caused by abrasion and friction. Also this nylon filament 1.75 has a low coefficient of friction, reducing energy loss and heat generated by friction. Good corrosion resistance to various chemical substances, this nylon 3d printer filament 1.75 can work under harsh environmental conditions
- Widely Applications of YXPOLYER PA Filament Nylon lends itself well to things like living hinges and other functional parts. YXPOLYER nylon filament 1.75mm is Super Tough, High-Strength and High Wear Resistance, so this nylon printer filament is suitable for automotive industry signal lamp bases, fuel dispensers, surface mount devices in the electronics and electrical markets, and household products, etc
- Odorless & Well Package Nylon Filament Our nylon filament 1.75mm is a high-strength modified Nylon printing material so this nylon filament 1.75 delivers excellent printing quality with No Order during printing. The package of this nylon filament is vacuum sealed with semi-aluminum foil bags with desiccant, which can better isolate air and water molecules. As the Nylon material is sensitive to moisture, please remember to put this nylon filament 1.75mm back into a vacuum bag
- Dimensional Accuracy & Consistency Nylon Filament 1.75 YXPOLYER 3d printer nylon filament dimensional accuracy 0.04 mm. YXPOLYER nylon printer filament has wide compatibility due to the small diameter error, 1.75 nylon filament is suitable for almost all 1.75mm FDM 3D printers. (We recommend print the Nylon filament at a printing temperature of 230 -250 , bed temperature of 80-100 C). 3D printer Solid glue is always required for better adhesion
- See more on Amazon...
Brand: yxpolyer | Manufacturer: yxpolyer
Dimensions: 21.41 x 7.79 x 20.80 inches | Weight: 2.20 Pounds
See On Amazon #4
Gizmo Dorks Nylon Filament for 3D Printers 1.75mm 200g, Natural Clear
Asin: B074W3LLJ8 | Model: HY-02-NYL-175-NAT | PartNumber: HY-02-NYL-175-NAT | Ean: 0887503179743 | UPC: 887503179743
1.75Mm Filament Diameter (Dimensional Accuracy Of +/- 0.03Mm).
Compatible With Most 3D Printers Such As Monoprice Maker Select, Lulzbot, Flash Forge, And Many More..
Net Weight: 200 Grams / Spool Diameter: 6" / Spool Width: 1.5" / Spool Hub Diameter: 2.25".
Extrusion Nozzle Temperature: 230 - 260 C; Recommended To Use A Heated Build Platform.
Features
- Nylon 3D printer filament vacuumed sealed with desiccant is the perfect filament for intermediate users looking for strong and resilient parts
- Extrusion nozzle temperature: 230 - 260 C; Recommended to use a heated build platform
- 1.75mm filament diameter (Dimensional Accuracy of +/- 0.03mm)
- Net weight: 200 grams / Spool Diameter: 6 / Spool Width: 1.5 / Spool Hub Diameter: 2.25
- Compatible with most 3D printers such as Monoprice Maker Select, Lulzbot, Flash Forge, and many more.
- See more on Amazon...
Brand: Gizmo Dorks | Manufacturer: Gizmo Dorks
Dimensions: 2.00 x 5.00 x 5.00 inches | Weight: 0.60 pounds
See On Amazon #5
SainSmart PA6 Nylon Filament 1.75mm 3D Printer Filament, 1kg Cardboard Spool(2.2lbs), Dimensional Accuracy +/- 0.04 mm, White
Asin: B0BCW6R4FC | Ean: 0816550026212 | UPC: 816550026212
High Strength And Durability: Suitable For Manufacturing Durable Auto Parts, Mechanical Parts, And Protective Shells. Nylon Filament Is An Excellent Choice For Engineering Materials. Pva Glue Is Always Required For Better Adhesion..
Sainsmart 3D Printer Filament Provides Quality Pla/ Pva/ Pa/ Petg/ Tpu/ Pa-Cf 3D Filament. It Is Professional To Enable You To See Your Thoughts And Concepts Engineered Into A Real And Rewarding Reality..
Wide Compatibility: Compatible With Most Fdm Printers That Use 1.75Mm Filament In The Market, Including Sainsmart Creality, Mk3, Monprice Flashforge, Qidi, Etc..
Printing Setting: Nozzle Temp: 220℃-280℃, Bed Temp: 80℃-100℃, Printing Speed:30-70Mm/S, Dimensional Accuracy +/- 0.04 Mm..
Features
- PA6 is a thermoplastic plastic with good strength, heat resistance, excellent impact resistance and low warping, but it is sensitive to moisture and needs to be used with the filament dryer.
- Printing Setting: Nozzle Temp: 220 -280 , bed Temp: 80 -100 , printing speed:30-70mm/s, dimensional accuracy +/- 0.04 mm.
- High strength and Durability: Suitable for manufacturing durable auto parts, mechanical parts, and protective shells. Nylon filament is an excellent choice for engineering materials. PVA glue is always required for better adhesion.
- Wide compatibility: Compatible with most FDM printers that use 1.75mm filament in the market, including SainSmart Creality, MK3, Monprice FlashForge, QIDI, etc.
- SainSmart 3D Printer Filament provides quality PLA/ PVA/ PA/ PETG/ TPU/ PA-CF 3D filament. It is professional to enable you to see your thoughts and concepts engineered into a real and rewarding reality.
- See more on Amazon...
Brand: SainSmart | Manufacturer: SainSmart
Weight: 2.20 Pounds
Warranty: No
See On Amazon #6
Gizmo Dorks Nylon Filament for 3D Printers 1.75mm 200g, White
Asin: B074VZSWSM | Model: HY-02-NYL-175-WHT | PartNumber: HY-02-NYL-175-WHT | Ean: 0887503179750 | UPC: 887503179750
1.75Mm Filament Diameter (Dimensional Accuracy Of +/- 0.03Mm).
Compatible With Most 3D Printers Such As Monoprice Maker Select, Lulzbot, Flash Forge, And Many More..
Net Weight: 200 Grams / Spool Diameter: 6" / Spool Width: 1.5" / Spool Hub Diameter: 2.25".
Extrusion Nozzle Temperature: 230 - 260 C; Recommended To Use A Heated Build Platform.
Features
- Nylon 3D printer filament vacuumed sealed with desiccant is the perfect filament for intermediate users looking for strong and resilient parts
- Extrusion nozzle temperature: 230 - 260 C; Recommended to use a heated build platform
- 1.75mm filament diameter (Dimensional Accuracy of +/- 0.03mm)
- Net weight: 200 grams / Spool Diameter: 6 / Spool Width: 1.5 / Spool Hub Diameter: 2.25
- Compatible with most 3D printers such as Monoprice Maker Select, Lulzbot, Flash Forge, and many more.
- See more on Amazon...
Brand: Gizmo Dorks | Manufacturer: Gizmo Dorks
Dimensions: 2.00 x 5.00 x 5.00 inches | Weight: 0.60 pounds
See On Amazon #7
Gizmo Dorks 1.75mm Nylon Filament 1kg / 2.2lbs for 3D Printers, Natural Clear
Asin: B00LAJMYEK | Model: HY-NYL-175-NAT | PartNumber: HY-NYL-175-NAT | Ean: 0887503148237 | UPC: 887503148237
Only Use In Well Ventilated Areas.
Use A Heated Bed If Available Not Required.
Store Dry When Not In Use, Absorbs Moisture.
Print Speeds : 28Mm/S - 34Mm/S.
Features
- Printing temperature : 230 C - 260 C depending on part and printer type
- Print speeds : 28mm/s - 34mm/s
- Only use in well ventilated areas
- Store dry when not in use, absorbs moisture
- Use a heated bed if available not required
- See more on Amazon...
Brand: Gizmo Dorks | Manufacturer: Gizmo Dorks
Dimensions: 3.00 x 8.50 x 8.50 inches | Weight: 2.20 Pounds
See On Amazon #8
Gizmo Dorks Nylon Filament for 3D Printers 3mm (2.85mm) 200g, Black
Asin: B074VRHKF2 | Model: HY-02-NYL-300-BLK | PartNumber: HY-02-NYL-300-BLK | Ean: 0887503179767 | UPC: 887503179767
2.85Mm Filament Diameter (Dimensional Accuracy Of +/- 0.03Mm).
Compatible With Most 3D Printers Such As Monoprice Maker Select, Lulzbot, Flash Forge, And Many More..
Net Weight: 200 Grams / Spool Diameter: 6" / Spool Width: 1.5" / Spool Hub Diameter: 2.25".
Extrusion Nozzle Temperature: 230 - 260 C; Recommended To Use A Heated Build Platform.
Features
- Nylon 3D printer filament vacuumed sealed with desiccant is the perfect filament for intermediate users looking for strong and resilient parts
- Extrusion nozzle temperature: 230 - 260 C; Recommended to use a heated build platform
- 2.85mm filament diameter (Dimensional Accuracy of +/- 0.03mm)
- Net weight: 200 grams / Spool Diameter: 6 / Spool Width: 1.5 / Spool Hub Diameter: 2.25
- Compatible with most 3D printers such as Monoprice Maker Select, Lulzbot, Flash Forge, and many more.
- See more on Amazon...
Brand: Gizmo Dorks | Manufacturer: Gizmo Dorks
Dimensions: 2.00 x 5.00 x 5.00 inches | Weight: 0.44 pounds
See On Amazon #9
Gizmo Dorks Nylon Filament for 3D Printers 1.75mm 200g, Black
Asin: B074VPZJ86 | Model: HY-02-NYL-175-BLK | PartNumber: HY-02-NYL-175-BLK | Ean: 0887503179736 | UPC: 887503179736
1.75Mm Filament Diameter (Dimensional Accuracy Of +/- 0.03Mm).
Compatible With Most 3D Printers Such As Monoprice Maker Select, Lulzbot, Flash Forge, And Many More..
Net Weight: 200 Grams / Spool Diameter: 6" / Spool Width: 1.5" / Spool Hub Diameter: 2.25".
Extrusion Nozzle Temperature: 230 - 260 C; Recommended To Use A Heated Build Platform.
Features
- Nylon 3D printer filament vacuumed sealed with desiccant is the perfect filament for intermediate users looking for strong and resilient parts
- Extrusion nozzle temperature: 230 - 260 C; Recommended to use a heated build platform
- 1.75mm filament diameter (Dimensional Accuracy of +/- 0.03mm)
- Net weight: 200 grams / Spool Diameter: 6 / Spool Width: 1.5 / Spool Hub Diameter: 2.25
- Compatible with most 3D printers such as Monoprice Maker Select, Lulzbot, Flash Forge, and many more.
- See more on Amazon...
Brand: Gizmo Dorks | Manufacturer: Gizmo Dorks
Dimensions: 2.00 x 5.00 x 5.00 inches | Weight: 0.60 pounds
See On Amazon #10
Gizmo Dorks Nylon Filament for 3D Printers 3mm (2.85mm) 200g, Natural Clear
Asin: B074W1XLR8 | Model: EPESTOEC | PartNumber: EPESTOEC | Ean: 0887503179774 | UPC: 887503179774
2.85Mm Filament Diameter (Dimensional Accuracy Of +/- 0.03Mm).
Compatible With Most 3D Printers Such As Monoprice Maker Select, Lulzbot, Flash Forge, And Many More..
Net Weight: 200 Grams / Spool Diameter: 6" / Spool Width: 1.5" / Spool Hub Diameter: 2.25".
Extrusion Nozzle Temperature: 230 - 260 C; Recommended To Use A Heated Build Platform.
Features
- Nylon 3D printer filament vacuumed sealed with desiccant is the perfect filament for intermediate users looking for strong and resilient parts
- Extrusion nozzle temperature: 230 - 260 C; Recommended to use a heated build platform
- 2.85mm filament diameter (Dimensional Accuracy of +/- 0.03mm)
- Net weight: 200 grams / Spool Diameter: 6 / Spool Width: 1.5 / Spool Hub Diameter: 2.25
- Compatible with most 3D printers such as Monoprice Maker Select, Lulzbot, Flash Forge, and many more.
- See more on Amazon...
First Available: 04/10/2023
Brand: Gizmo Dorks | Manufacturer: Gizmo Dorks
Dimensions: 2.00 x 5.00 x 5.00 inches | Weight: 0.44 pounds
See On Amazon
Looking For Something Else?
Search