DPTOOL Vacuum Gauge Tester Multifunction Fuel Pump Catalytic Converter Muffler Carburetor Exhaust Back Pressure Tester Digital Display Gauge with Adapters and Hose
Asin: B09N941LQ9
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Check Manifold Vacuum: Use This Vacuum Gauge Measure The Manifold Vacuum Pressure, Helped You Troubleshoot The System And Find The Failed Component. Start The Engine And Warm Up The Engine Temperature To Between 75-85 Degrees, Turn Off The Engine, Connect Vacuum Gauge, Started Let The Engine Run In Idling Conditions, And Ensure The Speed Is Around 850R/Min, If Guage Read Less Than 53Kpa, Indicates That The System Has A Leak.
Complete Kit: This Kit Have 7Pc Different Brass Cone, And 4Pc Different Plastic Cone, And 2Pc Different Adapters, So You Can Connect Different Part, Make This Vacuum Gauge Multifunction, The Hose 48 Inches, All The Tools Put In A Plastic Case, Easy To Storage.
Digital Display Gauge: Our Vacuum Gauge Is Digital Display, The Unit Is Kpa And Mbar, You Can Switch Between Two Units, Digital Dial Will More Direct And Accurate Show Pressure Than Needle, And Rubber Cover Protect In Sueface, This Tool Not Come With Battery.
Check Fuel Pump Pressure: This Vacuum Gauge Could Checking Fuel Pump Delivery Pressure, Only Mechanical Fuel Pump Systems, Not To Be Used To Check Fuel Pressure On Electric Fuel Pump Systems, Verify Fuel Mixture Settings Were Correct, Found The Vacuum Leaks, Tuned The Carb, Got A Good Idle Speed.
Features
- Exhaust Back Pressure Test: This gauge easy to to test pre and post catalytic converter back pressures, check exhaust for clearance issues, helps identify restricted exhaust and melted cat converters. no guessing about plugged exhaust.Removed O2 sensor and screw gauge and adapter into sensor hole. Started truck, accelerate the engine to 2500r/min, if gauge read less than13.8 Kpa pressure, showing no blockage.if greater than 13.8 Kpa, means have blockage
- Check Fuel Pump Pressure: This vacuum gauge could checking fuel pump delivery pressure, only mechanical fuel pump systems, not to be used to check fuel pressure on electric fuel pump systems, verify fuel mixture settings were correct, found the vacuum leaks, tuned the carb, got a good idle speed
- Check Manifold Vacuum: Use this vacuum gauge measure the manifold vacuum pressure, helped you troubleshoot the system and find the failed component. Start the engine and warm up the engine temperature to between 75-85 degrees, turn off the engine, connect vacuum gauge, Started let the engine run in idling conditions, and ensure the speed is around 850r/min, if guage read less than 53Kpa, indicates that the system has a leak
- Digital Display Gauge: Our vacuum gauge is digital display, the unit is Kpa and mbar, you can switch between two units, digital dial will more direct and accurate show pressure than needle, and rubber cover protect in sueface, this tool not come with battery
- Complete Kit: This kit have 7pc different brass cone, and 4pc different plastic cone, and 2pc different adapters, so you can connect different part, make this vacuum gauge multifunction, the hose 48 inches, all the tools put in a plastic case, easy to storage
- See more on Amazon...
Brand: DPTOOL | Manufacturer: DPTOOL
Dimensions: 2.17 x 9.65 x 8.07 inches | Weight: 1.41 pounds
See On Amazon Similar To DPTOOL Vacuum Gauge Tester Multifunction
#1
Hromee Fuel Pump and Vacuum Tester Gauge, Carburetor Pressure Diagnostics Leakage Tool Kit
Asin: B08P4P97H2
Pressure Gauge - The Gauge Has 4 Inches Diameter Large Scale, Color-Coded Measurement, Rubber Surrounded Protective And A Hook On The Top. So It’S Easy To Read And Use. Range Of Vacuum Dials Is 0-28In/Hg Vac, 0-70Cm/Hg; Range Of Pressures Dials Is 0-10 Psi/G, 0-0.7 Kg/Cm2..
Easy Storage - Heavy-Duty 11”X 5.7”X 2.4”Inch (28Cm X 14.5Cm X 6Cm) Plastic Blow-Molded Carrying Case For Easy Transportation, Safe Storage, And Quick Organization..
Hose And Accessories - The Kit Comes With A 2Ft/61Cm Rubber Hose (13/64-Inch Id And 23/64-Inch Od). The Max Working Pressure Is 40Psi. Other Accessories Include (1)Conical Adapter, (1)Plastic Connector, (1) 1/4”X18 Male To 1/8”-27 Female Adapter, (1)1/8”-27 Male To 7/32”Barbed Fitting Adapter, (1)1/8”-27 Female To 3/8”Male Adapter, (1)T-Type 7/32”Barded Fitting Adapter..
Car Vacuum Tester - Also Can Be Used For Testing Engine Vacuum Lines, Brake Assist System, Carburetor And Intake Manifold For Leaks, Vacuum Or Pressure Loss. Set Includes A Variety Of Adapters Suitable For Most Vehicles; Intended For Carburetor Engines With A Mechanical Fuel Pump Operating Pressures Below 10 Psi (0.7 Bar)..
Features
- FUEL PUMP - This pressure gauge set can be used to test fuel pump pressure, emission control devices, leaky, stuck open or burnt valves. Clogged muffler, turbo or exhaust system. Helps to locate leaks in the gas line, valve timing, worn out rings and seals, heating and air conditioning components.
- CAR VACUUM TESTER - Also can be used for testing engine vacuum lines, brake assist system, carburetor and intake manifold for leaks, vacuum or pressure loss. Set includes a variety of adapters suitable for most vehicles; Intended for carburetor engines with a mechanical fuel pump operating pressures below 10 PSI (0.7 Bar).
- PRESSURE GAUGE - The gauge has 4 inches diameter large scale, color-coded measurement, rubber surrounded protective and a hook on the top. so it s easy to read and use. Range of vacuum dials is 0-28in/Hg Vac, 0-70cm/Hg; Range of pressures dials is 0-10 psi/g, 0-0.7 kg/cm2.
- HOSE AND ACCESSORIES - The kit comes with a 2ft/61cm rubber hose (13/64-inch ID and 23/64-inch OD). The max working pressure is 40PSI. Other accessories include (1)conical adapter, (1)plastic connector, (1) 1/4 x18 male to 1/8 -27 female adapter, (1)1/8 -27 male to 7/32 barbed fitting adapter, (1)1/8 -27 female to 3/8 male adapter, (1)T-type 7/32 barded fitting adapter.
- EASY STORAGE - Heavy-duty 11 x 5.7 x 2.4 inch (28cm x 14.5cm x 6cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
- See more on Amazon...
Brand: Hromee | Manufacturer: Hromee
Dimensions: 2.50 x 11.00 x 6.40 inches | Weight: 0.90 pounds
Warranty: Manufacturer warranty for 1 year from the day of purchase
See On Amazon #2
CPS VG200: Vacuum Gauge with Digital LCD Display
Asin: B009AXGCSC | Model: VG200 | PartNumber: VG200 | Ean: 0013317012192, 0750377771033 | UPC: 013317012192, 750377771033
Simple To Clean - Field Cleanable Sensor Designed To Withstand 400 Psi Of Positive Pressure..
User Selectable Units - Choose Between Microns, Torr, In/Hg Or Mbar..
Easy To Read - Continual Digital Readout Of Evacuation Process On Large, Easy To Read 5-Digit Lcd Display..
Smart Design - Advanced Sensor Design With Self-Heated Thermistor Bridge And Automatic Temperature Compensation..
Features
- ACCURATE - Calibrated to strict NIST standards for best-in-class accuracy and reliability.
- SMART DESIGN - Advanced sensor design with self-heated thermistor bridge and automatic temperature compensation.
- SIMPLE TO CLEAN - Field cleanable sensor designed to withstand 400 Psi of positive pressure.
- EASY TO READ - Continual digital readout of evacuation process on large, easy to read 5-digit LCD display.
- USER SELECTABLE UNITS - Choose between microns, torr, in/hg or mBar.
- See more on Amazon...
Brand: CPS | Manufacturer: CPS
Dimensions: 3.15 x 1.97 x 4.33 inches | Weight: 0.66 Pounds
See On Amazon #3
AZUNO Compression Tester Automotive, Digital Compression Gauge 200 PSI for Petrol Engine Cylinder Compression Tester Kit with Adapter & Hose
Asin: B098LNQXXC | Ean: 0791334707986 | UPC: 791334707986
【Smart Display And Bleeder Valve】: Wide Backlit Lcd Screen Displays Large, Clear Numbers In 4 Units. Auto Off After 2.5 Minutes Of Inactivity To Preserve Battery Life. Side Bleeder Valve Allows Repeated Tests Without Disconnecting The Hose..
【No Concerns Service】: Azuno Products All Enjoy One-Year Warranty And Customer Service Always Online To Provide Technical Support..
【Professional And Durable】: Built For All-Day Performance In The Shop Or Garage From The Highest Quality Steel And Brass Components..
【Accurate Measurement】: Digital Compression Gauge Has Incredible 0.1 Display Resolution Within 1% Of The Exact Pressure Ranged From 10-200 Psi..
Features
- Deluxe Design Set : Complete package for compression testing on gasoline engines, comes with 4 adapters of standard and specialty, and 16-inch flex hose gauge assembly with quick coupler, all firmly stored in the deluxe case.
- Accurate Measurement : Digital compression gauge has incredible 0.1 display resolution within 1% of the exact pressure ranged from 10-200 PSI.
- Smart Display and Bleeder Valve : Wide backlit LCD screen displays large, clear numbers in 4 units. Auto off after 2.5 minutes of inactivity to preserve battery life. Side bleeder valve allows repeated tests without disconnecting the hose.
- Professional and Durable : Built for all-day performance in the shop or garage from the highest quality steel and brass components.
- No Concerns Service : AZUNO products all enjoy One-year warranty and customer service always online to provide technical support.
- See more on Amazon...
Brand: AZUNO | Manufacturer: AZUNO
Dimensions: 2.10 x 11.80 x 9.30 inches
Warranty: Manufacturer warranty for One Year from day of purchase
See On Amazon #4
OTC 5613 Vacuum/Pressure Gauge Kit
Asin: B0050SG9KW | Model: 5613 | PartNumber: 5613 | Ean: 0731413418563 | UPC: 731413418563
Quickly Diagnose Internal Engine Problems Such As Bad Rings Valves And Leaking Head Gaskets.
Kit Comes Complete With Adapters For Most Applications; Sturdy Blow Molded Hard Case With Removable Lid Keeps Contents Protected And Secure When Not In Use.
Pinpoint Hard To Find Problems Such As Cracked Lines.
Accurately Tests Low-Pressure Fuel Systems.
Features
- Ideal kit for testing vacuum lines and components
- Accurately tests low-pressure fuel systems
- Quickly diagnose internal engine problems such as bad rings valves and leaking head gaskets
- Pinpoint hard to find problems such as cracked lines
- Kit comes complete with adapters for most applications; sturdy blow molded hard case with removable lid keeps contents protected and secure when not in use
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 4.00 x 10.25 x 9.10 inches | Weight: 0.00 Pounds
Warranty: Limited lifetime warranty
See On Amazon #5
CARSC Hand Held Vacuum Pump Tester Set Vacuum Gauge and Brake Bleeder Kit for Automotive with Adapters Case
Asin: B073CNGMRG | Model: 5 | PartNumber: 5 | Ean: 0607467371461 | UPC: 607467371461
Complete Kit Includes Accessories For Both Brake Bleeding And Automotive Diagnosis. Vacuum Pump Set Can Test And Diagnose A Wide Varity Of Parts And Common Systems On Any Vehicle..
Considerate Service: We Wholeheartedly Provide You With The Best Quality Products, The Most Perfect After-Sales Service..
Easy To Use: Easily Bleed Brakes By Yourself. Coming With A Carrying Bag, Made By High Quality Material, And Easy To Carry..
Tester: Cushioned Pistol Grip Handle With Vacuum Gauge, Simple Operation, Gauge Range 0-30 Inches Hg, 0-760 Mm Hg..
Features
- Multifunctional: The Vacuum Pump/Brake Bleeder is a multi-functional vacuum pump that is used to test a variety of essential vehicle settings and operations. By using some of the included accessory caps and fittings it can also be used as a brake bleeder.
- Tester: Cushioned pistol grip handle with vacuum gauge, simple operation, gauge range 0-30 inches Hg, 0-760 mm Hg.
- Complete kit includes accessories for both brake bleeding and automotive diagnosis. Vacuum pump set can test and diagnose a wide varity of parts and common systems on any vehicle.
- Easy to use: Easily bleed brakes by yourself. Coming with a carrying bag, made by high quality material, and easy to carry.
- Considerate Service: we wholeheartedly provide you with the best quality products, the most perfect after-sales service.
- See more on Amazon...
Brand: CARSC | Manufacturer: PETZE
See On Amazon #6
SENCTRL 30 inHg Vacuum Silicone Oil Liquid Filled Low Pressure Gauge, 2.5" Dial Size, 1/4" NPT Lower Mount, Stainless Steel Case, for Air Conditioning Manifolds, HVAC, Air Pump Vacuum Test
Asin: B0BCYMT1RT
Freeze Resistant: Silicone Oil Ensures Long-Term Work In Low Temperature(-40~140℉/-40~60℃) And Suits For Most Outdoor Conditions And Seasons..
Ip67 Waterproof Prevent Condensation Inside Caused Fogging Of The Window. Offer Clear Reading..
Lower Mount Male Connection With 1/4" Npt Thread..
Measures Pressure With Dual Scale (-30-0 Inhg/-100-0 Kpa). Display Accuracy Is + Or - 3/2/3% Over The Entire Range Of The Gauge..
Circular Dial Is Enclosed In A 304 Stainless Steel Case For Corrosion Resistance. Liquid Filled Inhibits Pointer Flutter And Prevents Damage To The Internal Mechanics From Vibration And Pulsation..
Features
- Brass and Stainless Steel wetted parts for measuring non-corrosive liquid and gas pressure. Such as water, oil, air pressure test. Compatible with air conditioning line repair, tank, hvac tools, air pump, pipe, tube vacuum test and etc..
- Circular dial is enclosed in a 304 stainless steel case for corrosion resistance. Liquid filled inhibits pointer flutter and prevents damage to the internal mechanics from vibration and pulsation.
- Freeze Resistant: Silicone oil ensures long-term work in low temperature(-40~140 /-40~60 ) and suits for most outdoor conditions and seasons.
- Measures pressure with dual scale (-30-0 inHg/-100-0 kPa). Display accuracy is + or - 3/2/3% over the entire range of the gauge.
- IP67 waterproof prevent condensation inside caused fogging of the window. Offer clear reading.
- Lower mount male connection with 1/4 NPT thread.
- See more on Amazon...
Brand: senctrl | Manufacturer: SENCTRL
See On Amazon #7
SENCTRL 30inHg Vacuum Pressure Gauge, 2" Dial, 1/4 NPT Lower Mount, Waterproof, Stainless Steel Case, for Tube Tester, HVAC, Pneumatic Air Compressor, Hand Pump, Valve Test
Asin: B0BF4KQ6P8 | Model: Y.5TDL04.N30/0Hg | PartNumber: Y.5TDL04.N30/0Hg
Compatible With Air Conditioning Manifolds, Hvac Pipe, Espresso, Hand Pump, Tire, Pneumatic, Portable Home Air Compressor, Low-Pressure Systems, Mini Split Vacuum Pump Kit, Vacuum Pumps For Resin And Etc..
Lower Mount Male Connection With 1/4" Npt Thread.
Measures Pressure With Dual Scale (-30-0 Inhg/-1-0 Bar). Display Accuracy Is + Or - 3/2/3% Over The Entire Range Of The Gauge.
Brass And Stainless Steel Wetted Parts For Measuring Non-Corrosive Liquid And Gas Pressure. Such As Water, Oil Pressure Test..
Features
- PRV-Tex Series: The circular dial is enclosed in a 304 stainless steel case for corrosion resistance. IP67 waterproof reduces condensation inside causing fogging of the window. Offer clear reading and weather resistance.
- Brass and Stainless Steel wetted parts for measuring non-corrosive liquid and gas pressure. Such as water, oil pressure test.
- Compatible with air conditioning manifolds, HVAC pipe, espresso, hand pump, tire, pneumatic, portable home air compressor, low-pressure systems, mini split vacuum pump kit, vacuum pumps for resin and etc.
- Measures pressure with dual scale (-30-0 inHg/-1-0 bar). Display accuracy is + or - 3/2/3% over the entire range of the gauge
- Lower mount male connection with 1/4 NPT thread
- See more on Amazon...
Brand: senctrl | Manufacturer: SENCTRL
See On Amazon #8
HFS(R) Fuel Pump Tester Gauge Kit Carburetor Valve Fuel Pump Pressure & Vacuum Tester Gauge Test Kit Below 10PSI for Car & Truck W/Storage Box
Asin: B00KRJFSFQ | Model: 8542039686 | PartNumber: 8542039686 | Ean: 0819300011902, 7258006868879 | UPC: 819300011902
[Adapters]: Adapters Suits For Most Vehicles..
[Package]: Packed In A Blow-Molded Case For Easy Storage And Transport, With Product Instructions Is Included..
[Application]: Check Carburetor Settings And Valve Adjustments..
[Kit Includes]: Comes With Large 3-1/2" Diameter Gauge And 24" Long Vacuum Hose..
Features
- [PRESSURE GAUGE]: Test fuel pump output pressure to 10PSI. Read engine vacuum to 28" HG.
- [KIT INCLUDES]: Comes with large 3-1/2 diameter gauge and 24 long vacuum hose.
- [ADAPTERS]: Adapters suits for most vehicles.
- [APPLICATION]: Check carburetor settings and valve adjustments.
- [PACKAGE]: Packed in a blow-molded case for easy storage and transport, with product instructions is included.
- See more on Amazon...
Brand: HFS | Manufacturer: Hardware Factory Store
Dimensions: 7.50 x 11.50 x 2.00 inches
See On Amazon #9
8MILELAKE Fuel Pump and Vacuum Tester Gauge Leak Carburetor Pressure Diagnostics
Asin: B01GHD0NAK | Model: SZ6521 | PartNumber: SZ6521 | Ean: 0614019644768, 0614019657645, 0700425112455, 0700425113940 | UPC: 614019644768, 614019657645, 700425112455, 700425113940
Comes With Large 3-1/2 Inches.
Blow Mold Case For Storage.
Adapters Suitable For Most Vehicles.
Read Engine Vacuum To 28.
Features
- Test fuel pump output pressure to 10PSI
- Read engine vacuum to 28
- Comes with large 3-1/2 inches
- Adapters suitable for most vehicles
- Blow mold case for storage
- See more on Amazon...
Brand: 8MILELAKE | Manufacturer: freebirdtrading
Dimensions: 7.48 x 11.42 x 1.57 inches
See On Amazon #10
ABN Car Vacuum and Fuel Pump Tester Gauge Kit Fuel Pump Pressure & Vacuum, Carburetor Intake Manifold, & Vacuum Test
Asin: B079P3DQPQ | Model: ABN-2190 | PartNumber: ABN-2190 | Ean: 0811498030031 | UPC: 811498030031
Easy To Use: Assembly And Operating Instruction Manual Included; Pressure Gauge Has A 4-Inch (10.2Cm) Diameter With Color-Coded Measurement Scales So It Is Easy To Read And A 1.2-Inch (3Cm) Thickness With Rubber Side Notches For Easy Grip; Extra-Long Rubber Hose And 14Mm/18Mm Manifold Adapter; Rubber Hose 40 Psi (2.8 Bar) Maximum Working Pressure; Pressure Gauge 0-28 In-Hg (0-70 Cm-Hg) Vacuum And 0-10 Psig (0-0.7 Kg/Cm²) Pressure.
Package Contents: Package Includes (1) Vacuum Pressure Gauge, (1) 2-Foot (61Cm) Long Rubber Hose – 13/64-Inch Id 23/64-Inch Od, (1) Brass Cone Adapter, (1) Plastic Connector, (1) 1/4”X18 Male To 1/8”-27 Female Brass Adapter, (1) 1/8”-27 Male To 7/32” Barbed Brass Fitting Adapter, (1) 1/8”-27 Female To 3/8” Male Brass Adapter, (1) T-Type 7/32” Barded Brass Fitting Adapter, (1) Carrying Case, And (1) Instruction Manual For Your Convenience.
Easy Storage: Heavy-Duty 12.75” X 2.25” X 7.25” Inch (32.4Cm X 5.7Cm X 18.4Cm) Plastic Blow-Molded Carrying Case With Handle For Easy Transportation, Safe Storage, And Quick Organization.
4-In-1 Kit: 4 Tests Can Be Performed – Fuel Pump Pressure, Fuel Pump Vacuum, Carburetor Intake Manifold, And Vacuum Test; When Reading The Pressure Gauge, Occasional Needle Drop Indicates That The Carb Or Tappets Need An Adjustment Plug, Missing Or Stuck Valve, Or Trouble In Carburetor; Steady, Regular Drop Indicates That The Valve Is Held Open, Burnt, Or Chipped; Wide Pressure Fluctuation At High Speeds Indicates A Weak Valve Spring; Steady Drop To Zero Pressure Indicates A Choked Muffler.
Features
- DIAGNOSE YOUR VEHICLE: The ABN Car Vacuum and Fuel Pump Tester Gauge Kit Fuel Pump Pressure & Vacuum, Carburetor Intake Manifold, & Vacuum Test enables testing of the fuel delivery pressure to the engine to check for worn or defective parts in fuel pumps and vacuum systems; Set includes a variety of adapters suitable for most vehicles; Intended for carburetor engines with a mechanical fuel pump operating pressures below 10 PSI (0.7 Bar)
- 4-IN-1 KIT: 4 tests can be performed Fuel pump pressure, fuel pump vacuum, carburetor intake manifold, and vacuum test; When reading the pressure gauge, occasional needle drop indicates that the carb or tappets need an adjustment plug, missing or stuck valve, or trouble in carburetor; Steady, regular drop indicates that the valve is held open, burnt, or chipped; Wide pressure fluctuation at high speeds indicates a weak valve spring; Steady drop to zero pressure indicates a choked muffler
- EASY TO USE: Assembly and operating instruction manual included; Pressure gauge has a 4-inch (10.2cm) diameter with color-coded measurement scales so it is easy to read and a 1.2-inch (3cm) thickness with rubber side notches for easy grip; Extra-long rubber hose and 14mm/18mm manifold adapter; Rubber hose 40 PSI (2.8 Bar) maximum working pressure; Pressure gauge 0-28 IN-Hg (0-70 cm-HG) vacuum and 0-10 PSIG (0-0.7 kg/cm ) pressure
- EASY STORAGE: Heavy-duty 12.75 x 2.25 x 7.25 inch (32.4cm x 5.7cm x 18.4cm) plastic blow-molded carrying case with handle for easy transportation, safe storage, and quick organization
- PACKAGE CONTENTS: Package includes (1) vacuum pressure gauge, (1) 2-foot (61cm) long rubber hose 13/64-inch ID 23/64-inch OD, (1) brass cone adapter, (1) plastic connector, (1) 1/4 x18 male to 1/8 -27 female brass adapter, (1) 1/8 -27 male to 7/32 barbed brass fitting adapter, (1) 1/8 -27 female to 3/8 male brass adapter, (1) T-type 7/32 barded brass fitting adapter, (1) carrying case, and (1) instruction manual for your convenience
- See more on Amazon...
Brand: ABN | Manufacturer: ABN
Dimensions: 2.25 x 12.75 x 7.25 Inches | Weight: 1.65 Pounds
See On Amazon #11
IVONNEY Fuel Pump and Vacuum Tester Gauge, Carburetor Pressure Tester Automotive Vacuum Gauge - Carburetor Pressure Diagnostics
Asin: B0BDKX2F44 | Model: fuel pump and vacuum tester gauge | PartNumber: fuel pump and vacuum tester gauge
✎Easy To Read: 4-Inch (10.2Cm) Diameter Pressure Gauge With Color-Coded Measurement Scales, 1.2-Inch (3Cm) Thickness With Rubber Side Notches, Easy To Read And Grip; Extra-Long Rubber Hose And 14Mm/18Mm Manifold Adapter; Rubber Hose 40 Psi (2.8 Bar) Maximum Working Pressure; Pressure Gauge 0-28 In-Hg (0-70 Cm-Hg) Vacuum And 0-10 Psig (0-0.7 Kg/Cm²) Pressure.
✎100% Satisfied Service: All The Tools Are Well Organized In A Storage Case For Easy Transportation, Simple Storage, And Quick Identification. 3 Months Warranty, If You Have Any Issues With Automotive Vacuum Gauge, Simply Contact Us For Troubleshooting Help. Thank You~.
✎Package Includes: 1 X Gauge,1 X 24-Inch Long Rubber Hose 40 Psi, 1 X Brass Cone Adapter,2 X Plastic Connector,1 X 1/4" X 18 Male To 1/8" -27 Female Brass Adapter,1 X 1/8”-27 Male To 7/32" Barbed Brass Fitting Adapter,1 X 1/8"-27 Female To 3/8" Male Brass Adapter,1 X T-Type 7/32" Barded Fitting Adapter, 1 X Carrying Case.
✎Universal Fuel Pump And Vacuum Tester Gauge: This Carburetor Carb Valve Fuel Pump Pressure Vacuum Tester Gauge Test Kit Will Test Fuel Pump Pressure And All Vacuum Operated Devices, Also Can Be Used For Testing Engine Vacuum Lines, Brake Assist System, Carburetor And Intake Manifold For Leaks, Vacuum Or Pressure Loss. 4 Tests Can Be Performed – Fuel Pump Pressure, Fuel Pump Vacuum, Carburetor Intake Manifold, And Vacuum Test.
Features
- Automotive Vacuum Gauge: The Fuel Pump and Vacuum Tester Gauge Kit enables testing of the fuel delivery pressure to the engine to check for worn or defective parts in fuel pumps and vacuum systems. This vacuum gauge kit also can be used to test fuel pump pressure, emission control devices, leaky, stuck open or burnt valves. Clogged muffler, turbo or exhaust system. Helps to locate leaks in the gas line, valve timing, worn out rings and seals, heating and air conditioning components
- Universal fuel pump and vacuum tester gauge: This carburetor carb valve fuel pump pressure vacuum tester gauge test kit will test fuel pump pressure and all vacuum operated devices, also can be used for testing engine vacuum lines, brake assist system, carburetor and intake manifold for leaks, vacuum or pressure loss. 4 tests can be performed Fuel pump pressure, fuel pump vacuum, carburetor intake manifold, and vacuum test
- Easy to Read: 4-inch (10.2cm) diameter pressure gauge with color-coded measurement scales, 1.2-inch (3cm) thickness with rubber side notches, easy to read and grip; Extra-long rubber hose and 14mm/18mm manifold adapter; Rubber hose 40 PSI (2.8 Bar) maximum working pressure; Pressure gauge 0-28 IN-Hg (0-70 cm-HG) vacuum and 0-10 PSIG (0-0.7 kg/cm ) pressure
- Package Includes: 1 x gauge,1 x 24-inch long rubber hose 40 PSI, 1 x brass cone adapter,2 x plastic connector,1 x 1/4 x 18 male to 1/8 -27 female brass adapter,1 x 1/8 -27 male to 7/32 barbed brass fitting adapter,1 x 1/8-27 female to 3/8 male brass adapter,1 x T-type 7/32 barded fitting adapter, 1 x carrying case
- 100% Satisfied Service: All the tools are well organized in a storage case for easy transportation, simple storage, and quick identification. 3 months warranty, If you have any issues with automotive vacuum gauge, simply contact us for troubleshooting help. Thank you~
- See more on Amazon...
Brand: IVONNEY | Manufacturer: IVONNEY
Dimensions: 1.00 x 3.00 x 2.00 Inches
Warranty: 3 MONTHS
See On Amazon #12
DASBET Hand Held Vacuum Pump Tester Set Vacuum Gauge and Brake Bleeder Kit for Automotive
Asin: B07GFMTQY2 | Model: ZTC-1106-2 | PartNumber: ZTC-1106-2 | Ean: 0687925996504 | UPC: 687925996504
Design: Our Brake Bleeder Kit Is Designed To Efficiently Extract Waste Oil And Air While Guiding The New Oil To Fill The Entire System. The Key Advantage Is That It Allows You To Operate The Bleeder Independently, Without The Need For Any Assistance! The Hand Held Vacuum Pump Tester Set Is Equipped With Vacuum Gauge, Convenient Readout Of Pressure, Pressure Range: 0-30Inhg, 0-760Mmhg..
Complete Accessories: The Hand Held Vacuum Pump Kit Includes Hand Pump With Gauge, Reservoir Jar, Transparent Hoses, Adapters, Connectors And Carry Case For Easy Transportation And Storage..
2 In 1 Automotive Solution: In Addition To Being A Vacuum Bleeding Kit, Our Brake Clutch Bleeder Tool Set Doubles As A Vacuum System Tester. With This Versatile 2-In-1 Vacuum Pump Tester Set, You Can Easily Bleed Brakes, Test Vacuum Readings Using The Pressure Gauge, And Pump Out Various Fluids Like Oil And Power Steering Fluids. The Included Adapters And Connectors Make It Compatible With Cars, Bikes, Motorcycles, And More..
Great Quality: The Hand Held Vacuum Pump Tester Set Is Made Of High Quality Material, Alloy Steel, Plastics And Rubber For Durability. Our Tubes In The Brake Bleeding Kit Are Crafted From Premium Pvc, Ensuring Exceptional Resilience, Heat Resistance, And Superior Sealing Performance..
Features
- Function: The vacuum pump is multi-functional, can be used to test essential vehicle settings and work as vacuum bleeder for brakes. Thanks to the intelligently designed handheld vacuum pump and clear instructions, bleeding each wheel now only takes one person less than 5 minutes with great ease.
- Great Quality: The hand held vacuum pump tester set is made of high quality material, alloy steel, plastics and rubber for durability. Our tubes in the brake bleeding kit are crafted from premium PVC, ensuring exceptional resilience, heat resistance, and superior sealing performance.
- Design: Our brake bleeder kit is designed to efficiently extract waste oil and air while guiding the new oil to fill the entire system. The key advantage is that it allows you to operate the bleeder independently, without the need for any assistance! The hand held vacuum pump tester set is equipped with vacuum gauge, convenient readout of pressure, pressure range: 0-30inHg, 0-760mmHg.
- 2 in 1 Automotive Solution: In addition to being a vacuum bleeding kit, our brake clutch bleeder tool set doubles as a vacuum system tester. With this versatile 2-in-1 vacuum pump tester set, you can easily bleed brakes, test vacuum readings using the pressure gauge, and pump out various fluids like oil and power steering fluids. The included adapters and connectors make it compatible with cars, bikes, motorcycles, and more.
- Complete Accessories: The hand held vacuum pump kit includes hand pump with gauge, reservoir jar, transparent hoses, adapters, connectors and carry case for easy transportation and storage.
- See more on Amazon...
Brand: DASBET | Manufacturer: DASBET
Dimensions: 2.80 x 9.40 x 7.90 Inches
Warranty: 6 months
See On Amazon #13
KUNTEC Car Fuel Pump and Vacuum Pressure Gauge Leak Kit Carburetor Pressure Diagnostics
Asin: B08GCH89QY | Model: KC0005 | PartNumber: KC0005 | Ean: 0617256013472 | UPC: 617256013472
Pressure Gauge Has A 3-1/2" Diameter With Color-Coded Measurement Scales So It Is Easy To Read.
Package Includes (1) Vacuum Pressure Gauge, (1) 24Inch Long Rubber Hose, (1) Brass Cone Adapter, (1) Plastic Connector, (1) 1/4”X18 Male To 1/8”-27 Female Brass Adapter, (1) 1/8”-27 Male To 7/32” Barbed Brass Fitting Adapter, (1) 1/8”-27 Female To 3/8” Male Brass Adapter, (1) T-Type 7/32” Barded Brass Fitting Adapter And (1) Carrying Case.
Extra-Long Rubber Hose Is 24-Inch; Maximum Working Pressure Of Rubber Hose 40 Psi (2.8 Bar).
The Fuel Pressure & Vacuum Gauge Includes A Variety Of Adapters Suitable For Most Vehicles; Intended For Carburetor Engines With A Mechanical Fuel Pump Operating Pressures Below 10 Psi (0.7 Bar).
Features
- This Fuel Pump and Vacuum Tester is to test of the fuel delivery pressure to the engine to check for worn or defective parts in fuel pumps and vacuum systems
- The Fuel Pressure & Vacuum Gauge includes a variety of adapters suitable for most vehicles; Intended for carburetor engines with a mechanical fuel pump operating pressures below 10 PSI (0.7 Bar)
- Pressure gauge has a 3-1/2 diameter with color-coded measurement scales so it is easy to read
- Extra-long rubber hose is 24-inch; Maximum working pressure of rubber hose 40 PSI (2.8 Bar)
- Package includes (1) vacuum pressure gauge, (1) 24inch long rubber hose, (1) brass cone adapter, (1) plastic connector, (1) 1/4 x18 male to 1/8 -27 female brass adapter, (1) 1/8 -27 male to 7/32 barbed brass fitting adapter, (1) 1/8 -27 female to 3/8 male brass adapter, (1) T-type 7/32 barded brass fitting adapter and (1) carrying case
- See more on Amazon...
Brand: KUNTEC | Manufacturer: kuangchen
Dimensions: 5.91 x 7.87 x 1.97 inches
See On Amazon #14
BTSHUB Fuel Pump & Vacuum Tester Gauge Leak Carburetor Pressure Diagnostics Tool Kit
Asin: B08BCK75NX | Ean: 0617256063491, 0609832336624 | UPC: 609832336624, 617256063491
Easy-To-Use: Instruction Manual Included; Includes A Variety Of Adapters Ideal For Most Vehicles; 4-Inch (10.2Cm) Diameter Pressure Gauge With Color-Coded Measurement Scales, 1.2-Inch (3Cm) Thickness With Rubber Side Notches, Easy To Read And Grip; Extra-Long Rubber Hose And 14Mm/18Mm Manifold Adapter; Rubber Hose 40 Psi (2.8 Bar) Maximum Working Pressure.
Package Includes: 1X Gauge,1X 24-Inch Long Rubber Hose 40 Psi,1X Brass Cone Adapter,2X Plastic Connector,1X 1/4" X18 Male To 1/8" -27 Female Brass Adapter,1X 1/8”-27 Male To 7/32" Barbed Brass Fitting Adapter,1X 1/8"-27 Female To 3/8" Male Brass Adapter,1X T-Type 7/32" Barded Fitting Adapter.
Easy Storage: All The Tools Are Well Organized In A Storage Case For Easy Transportation, Simple Storage, And Quick Identification.
Applications: This Tester Will Test Fuel Pump Pressure And All Vacuum Operated Devices, 4 Tests Can Be Performed – Fuel Pump Pressure, Fuel Pump Vacuum, Carburetor Intake Manifold, And Vacuum Test.
Features
- Professional Tester Kit: Fuel Pump Pressure & VacuumTester Gauge Kit, Carburetor Test enables testing of the fuel delivery pressure to the engine to check for worn or defective parts; Diagnose leaking valves, incorrect timing, leaky intake manifolds, and clogged mufflers. Fuel pump operating pressures up to 10 PSI (0.7 Bar), Pressure gauge 0-28 IN-Hg (0-70 cm-HG) vacuum and 0-10 PSI (0-0.7 kg/cm ) pressure
- Applications: This tester will test fuel pump pressure and all vacuum operated devices, 4 tests can be performed Fuel pump pressure, fuel pump vacuum, carburetor intake manifold, and vacuum test
- Easy-to-use: Instruction manual included; Includes a variety of adapters ideal for most vehicles; 4-inch (10.2cm) diameter pressure gauge with color-coded measurement scales, 1.2-inch (3cm) thickness with rubber side notches, easy to read and grip; Extra-long rubber hose and 14mm/18mm manifold adapter; Rubber hose 40 PSI (2.8 Bar) maximum working pressure
- Easy Storage: All the tools are well organized in a storage case for easy transportation, simple storage, and quick identification
- Package Includes: 1x Gauge,1x 24-inch long rubber hose 40 PSI,1x brass cone adapter,2x plastic connector,1x 1/4 x18 male to 1/8 -27 female brass adapter,1x 1/8 -27 male to 7/32 barbed brass fitting adapter,1x 1/8-27 female to 3/8 male brass adapter,1x T-type 7/32 barded fitting adapter
- See more on Amazon...
Brand: BTSHUB | Manufacturer: Ruichen
Dimensions: 3.15 x 7.87 x 5.91 inches | Weight: 0.44 Pounds
See On Amazon #15
GOATACURA -30inHg-0 Glycerin Filled Vacuum Pressure Gauge, 2" Dial Size, 304 Stainless Steel Case, 1/4" NPT Lower Mount, with High Accuracy
Asin: B0CN2YGTF9 | Model: GA017 | PartNumber: GA017
【Parameter】2" Dial Size, 1/4" Npt Lower Mount.
【Accuracy】+/-3-2-3%, Comply With Ansi B40.1 (Grade B) Standard, With Accuracy Test Report..
【Range】-30Inhg-0, Single Scale, Clear Reading.
【Features】Glycerine Filled Provide Good Vibration And Shock Resistance, 304 Stainless Steel Case Corrosion Resistance With Durable Structure..
Features
- Application For measuring the vacuum of gas and air, suitable for vacuum pump, vacuum tank or other vacuum system.
- Features Glycerine filled provide good vibration and shock resistance, 304 stainless steel case corrosion resistance with durable structure.
- Parameter 2 dial size, 1/4 NPT lower mount
- Range -30inHg-0, single scale, clear reading
- Accuracy +/-3-2-3%, comply with ANSI B40.1 (Grade B) standard, with accuracy test report.
- See more on Amazon...
Brand: GOATACURA | Manufacturer: GOATACURA
See On Amazon #16
Xetron Digital Vacuum Gauge Wireless Micron Gauge HVAC with Bluetooth APP Support, OTA Remote Firmware Upgrade & Accurate Rechargeable Vacuum Tester Meter - 1/4" SAE
Asin: B0C3V6YWSK
📏 Multiple Unit Measurements: Whatever Your Measurement Needs, This Vacuum Gauge Has Got You Covered. With A Wide Measuring Range From 1 To 19000 Microns And Vacuum Units Including Microns, Torr, Mtorr, Inhg, Pa, Kpa, Mbar, And Psia, Along With Temperature Units In ℉/℃, It Effortlessly Caters To Various Application Scenarios..
🔋 Rechargeable & Support Service: Boasting A High-Capacity Lithium Battery, It Operates Continuously For Up To 20 Hours On A Single Charge And Comes With A Type-C Charging Port For Added Convenience. Most Importantly, We Offer A Worry-Free One-Year Warranty And 24/7 Customer Service, Providing The Most Reliable After-Sales Support For Your Purchase..
📱 Versatile App Functionality: When Paired With The "Ai Tools" App, Its Functionality Becomes Even More Robust. Not Only Can You Log Vacuum/Temperature Data And Set Decay Target Values For Leak Tests, But You Can Also View Data In Real-Time Graphs, Receive Alerts Or Vibrations When Vacuum Values Hit Targets, And Even Provide Documentation In Pdf/Excel Formats. Elevate Your Work With Smarter, More Precise, And Efficient Features..
⏱️ Efficient Work To Save Time: Equipped With Optimized Advanced Sensors And Real-Time Calculation Features, It Swiftly Determines Micron/Temperature Levels And Sends Instant Notifications Upon Reaching The Evacuation Target. This Vacuum Gauge Is Not Only Accurate But Also Highly Efficient, Significantly Saving Your Time And Effort..
Features
- Bluetooth Smart Connectivity: Our wireless vacuum gauge utilizes Bluetooth to easily connect with your devices. Monitor the evacuation progress in hvac or heat pump systems in real-time through the dedicated mobile APP, keeping you updated on your job status anytime, anywhere.
- Efficient Work to Save Time: Equipped with optimized advanced sensors and real-time calculation features, it swiftly determines micron/temperature levels and sends instant notifications upon reaching the evacuation target. This vacuum gauge is not only accurate but also highly efficient, significantly saving your time and effort.
- Multiple Unit Measurements: Whatever your measurement needs, this vacuum gauge has got you covered. With a wide measuring range from 1 to 19000 microns and vacuum units including microns, Torr, mTorr, inHg, Pa, KPa, mbar, and psia, along with temperature units in / , it effortlessly caters to various application scenarios.
- Versatile APP Functionality: When paired with the AI Tools APP, its functionality becomes even more robust. Not only can you log vacuum/temperature data and set decay target values for leak tests, but you can also view data in real-time graphs, receive alerts or vibrations when vacuum values hit targets, and even provide documentation in PDF/Excel formats. Elevate your work with smarter, more precise, and efficient features.
- Rechargeable & Support Service: Boasting a high-capacity lithium battery, it operates continuously for up to 20 hours on a single charge and comes with a Type-C charging port for added convenience. Most importantly, we offer a worry-free one-year warranty and 24/7 customer service, providing the most reliable after-sales support for your purchase.
- See more on Amazon...
Brand: Xetron | Manufacturer: Xetron
Weight: 0.26 Pounds
See On Amazon #17
Acymner Vacuum and Fuel Pump Tester Gauge Kit | Gauge Leak Carburetor Pressure Diagnostics Tool Kit
Asin: B0BHQKNC5F | Model: ZH108-3 | PartNumber: ZH108-3
Wide Application: This Vacuum And Fuel Pump Tester Gauge Kit Will Test Fuel Pump Pressure And All Vacuum Operated Devices, 4 Tests Can Be Performed – Fuel Pump Pressure, Fuel Pump Vacuum, Carburetor Intake Manifold, And Vacuum Test..
Easy Storage: Our Vacuum Gauge Tester Kit Is Well Organized In A Storage Case For Easy Transportation, Simple Storage, And Quick Identification..
Package Included: 1X Vacuum Pressure Gauge, 1X 2-Foot (61Cm) Long Rubber Hose – 13/64-Inch Id 23/64-Inch Od, 1X Brass Cone Adapter, 1X Plastic Connector, 1X 1/4”X18 Male To 1/8”-27 Female Brass Adapter, 1X 1/8”-27 Male To 7/32” Barbed Brass Fitting Adapter, 1X 1/8”-27 Female To 3/8” Male Brass Adapter, 1X T-Type 7/32” Barded Brass Fitting Adapter, 1X Carrying Case.
Easy To Use: Instruction Manual Included; The Fuel Pump Pressure & Vacuum Tester Gauge Kit Includes A Variety Of Adapters Ideal For Most Vehicles; 4-Inch (10.2Cm) Diameter Pressure Gauge With Color-Coded Measurement Scales, 1.2-Inch (3Cm) Thickness With Rubber Side Notches, Easy To Read And Grip; Extra-Long Rubber Hose And 14Mm/18Mm Manifold Adapter; Rubber Hose 40 Psi (2.8 Bar) Maximum Working Pressure..
Features
- Professional Vacuum and Fuel Pump Tester Kit: Fuel Pump Pressure & Vacuum Tester Gauge Kit, Carburetor Test enables testing of the fuel delivery pressure to the engine to check for worn or defective parts; Diagnose leaking valves, incorrect timing, leaky intake manifolds, and clogged mufflers. Fuel pump operating pressures up to 10 PSI (0.7 Bar), Pressure gauge 0-28 IN-Hg (0-70 cm-HG) vacuum and 0-10 PSI (0-0.7 kg/cm ) pressure
- Easy to Use: Instruction manual included; The fuel pump pressure & vacuum tester gauge kit includes a variety of adapters ideal for most vehicles; 4-inch (10.2cm) diameter pressure gauge with color-coded measurement scales, 1.2-inch (3cm) thickness with rubber side notches, easy to read and grip; Extra-long rubber hose and 14mm/18mm manifold adapter; Rubber hose 40 PSI (2.8 Bar) maximum working pressure.
- Wide Application: This vacuum and fuel pump tester gauge kit will test fuel pump pressure and all vacuum operated devices, 4 tests can be performed Fuel pump pressure, fuel pump vacuum, carburetor intake manifold, and vacuum test.
- Package Included: 1x vacuum pressure gauge, 1x 2-foot (61cm) long rubber hose 13/64-inch ID 23/64-inch OD, 1x brass cone adapter, 1x plastic connector, 1x 1/4 x18 male to 1/8 -27 female brass adapter, 1x 1/8 -27 male to 7/32 barbed brass fitting adapter, 1x 1/8 -27 female to 3/8 male brass adapter, 1x T-type 7/32 barded brass fitting adapter, 1x carrying case
- Easy Storage: Our vacuum gauge tester kit is well organized in a storage case for easy transportation, simple storage, and quick identification.
- See more on Amazon...
Brand: Acymner | Manufacturer: Acymner
Warranty: 6 Months
See On Amazon #18
CMTOOL Vacuum Gauge HVAC Digital Micron Gauge HVAC Micron Vacuum Gauge Tester 100KPa/750061Microns Digital Vacuum Micron Meter Set 13 Units AC Tool Vacuum Test Kit with 1/4'' Quick Coupler Access Tee
Asin: B0C1S83NLZ | Ean: 0728990666081 | UPC: 728990666081
2.【High Precision Sensor & 13 Pressure Units】The Micron Vacuum Gauge Uses A Professional Micron-Level Sensor For More Accurate Measurement. Measuring Range: 0-100Kpa/14.50Psi/750061Umhg (Micron), Resolution: 0.001Kpa/1Umhg, Accuracy: ±0.1%Fs. The Hvac Micron Vacuum Gauge Supports 13 Units: Mmhg, Inhg, Umhg, Fth2o, Cmh2o, Inh2o, Pa, Kpa, Mbar, Bar, Kg/Cm², Psi, Oz/In²..
6.【Packing List And 3-Year Warranty】The Digital Micron Vacuum Gauge Kit Includes A Vacuum Gauge (Built-In 9V Battery), A 1/4" Sae Extension Straight Joint, A 1/4" Sae Tee Joint, An English User Manual And A Portable Carrying Bag. We Offer A Free 36-Month Warranty On This Micron Vacuum Gauge Kit To Ensure Your Shopping Experience. If You Have Any Questions About This Micron Gauge Hvac Kit, Please Feel Free To Contact Us And We Will Provide You With A Satisfactory Solution As Soon As Possible..
4.【Large Display Supports Backlight & ℃/℉ Switching】The 4.2Cm×4.8Cm High-Definition Display Screen Supports Lcd Backlight, Which Can Display Clear Data Even In Dark Or Weak Light Conditions. When The Digital Micron Vacuum Gauge Is Turned On, Short Press The "On/Off" Button To Turn On And Off The Backlight. “Units” Button: Short Press To Switch Pressure Units, Long Press To Switch Temperature Units..
5.【Wide Application】The Micron Gauge Is Used To Accurately Measure Small Pressure Changes In A Vacuum, Usually Used In Conjunction With Vacuum Pumps And Refrigerant Gauges, Allowing You To Monitor The Vacuum Evacuation Process In Precision Cooling Systems And Heat Pumps. The Digital Vacuum Gauge Can Also Read The Real-Time Pressure During The Evacuation Of The Refrigeration System To Help You Judge The Degree Of Moisture Removal And Elimination Of Contaminants Such As Oil And External Gases..
3.【Calibration Function & Battery Level Display & Non-Slip Design】By Long Pressing The "Cal" Button, The Micron Vacuum Gauge Enters The Calibration Mode And Exits Automatically After Completion. Powered By A 9V Battery (Included In The Package), The Battery Frame On The Screen Will Display The Battery Level. Both Sides Are Designed With Non-Slip Rubber, Which Is Non-Slip And Comfortable To Hold. The Digital Vacuum Gauge Adopts Ip54 Dustproof Level, Which Is Suitable For Various Field Tests..
1.【Monitoring Mode & Sound And Light Alarm】When The Micron Vacuum Gauge Is Turned On, It Defaults To Normal Mode, Short Press The "Set" Button To Enter The Monitoring Mode. If The Current Pressure Is Lower Than The Set Pressure, The Backlight Of The Hvac Vacuum Gauge Will Flash And The Buzzer Will Sound Continuously. When The Pressure Is Greater Than The Set Pressure, The Alarm Will Disappear Automatically (Press Any Key Or The Alarm Can Be Automatically Disarmed After 30 Seconds)..
Features
- NOTE: (1) When using the product, you must use the sealing gasket included in the package to prevent gas leakage. (2) Use the calibration function to calibrate the product before each measurement. Note: Failure to calibrate will affect the measurement results. (3) When the gas change is not obvious, wait for 1-2 minutes. If there is no change in the measurement data, it means the gas tends to be stable and is in a vacuum state.
- 1. Monitoring Mode & Sound and Light Alarm When the micron vacuum gauge is turned on, it defaults to normal mode, short press the SET button to enter the monitoring mode. If the current pressure is lower than the set pressure, the backlight of the HVAC vacuum gauge will flash and the buzzer will sound continuously. When the pressure is greater than the set pressure, the alarm will disappear automatically (press any key or the alarm can be automatically disarmed after 30 seconds).
- 2. High Precision Sensor & 13 Pressure Units The micron vacuum gauge uses a professional micron-level sensor for more accurate measurement. Measuring range: 0-100KPa/14.50Psi/750061umHg (micron), resolution: 0.001Kpa/1umHg, accuracy: 0.1%FS. The HVAC micron vacuum gauge supports 13 units: mmHg, inHg, umHg, ftH2O, cmH2O, inH2O, Pa, Kpa, mbar, bar, Kg/cm , psi, oz/in .
- 3. Calibration Function & Battery Level Display & Non-Slip Design By long pressing the CAL button, the micron vacuum gauge enters the calibration mode and exits automatically after completion. Powered by a 9V battery (included in the package), the battery frame on the screen will display the battery level. Both sides are designed with non-slip rubber, which is non-slip and comfortable to hold. The digital vacuum gauge adopts IP54 dustproof level, which is suitable for various field tests.
- 4. Large Display Supports Backlight & / Switching The 4.2CM 4.8CM high-definition display screen supports LCD backlight, which can display clear data even in dark or weak light conditions. When the digital micron vacuum gauge is turned on, short press the ON/OFF button to turn on and off the backlight. UNITS button: short press to switch pressure units, long press to switch temperature units.
- 5. Wide Application The micron gauge is used to accurately measure small pressure changes in a vacuum, usually used in conjunction with vacuum pumps and refrigerant gauges, allowing you to monitor the vacuum evacuation process in precision cooling systems and heat pumps. The digital vacuum gauge can also read the real-time pressure during the evacuation of the refrigeration system to help you judge the degree of moisture removal and elimination of contaminants such as oil and external gases.
- 6. Packing List and 3-Year Warranty The digital micron vacuum gauge kit includes a vacuum gauge (built-in 9v battery), a 1/4 SAE extension straight joint, a 1/4 SAE tee joint, an English user manual and a portable carrying bag. We offer a free 36-month warranty on this micron vacuum gauge kit to ensure your shopping experience. If you have any questions about this micron gauge HVAC kit, please feel free to contact us and we will provide you with a satisfactory solution as soon as possible.
- See more on Amazon...
Brand: CMTOOL | Manufacturer: CMTOOL
Dimensions: 1.97 x 7.87 x 5.91 Inches | Weight: 0.88 Pounds
See On Amazon #19
Lisle 20300 Vacuum Gauge and Fuel Pump Tester
Asin: B000CODRFO | Model: 20300 | PartNumber: 20300 | Ean: 0083045203001 | UPC: 083045203001
Pressure Units: 0-14 Psi And 0-1000 G/Cm2.
Shipping Weight: 9 Oz..
Comes In Skin-Pack.
Vacuum Units: 0-25 Inch Hg And 0-800 Mm Hg.
Features
- Easy reading gauge assures accurate vacuum and pressure check
- Vacuum Units: 0-25 inch Hg and 0-800 mm Hg
- Pressure Units: 0-14 PSI and 0-1000 g/cm2
- Comes in skin-pack
- Shipping weight: 9 oz.
- See more on Amazon...
Brand: Lisle | Manufacturer: Lisle
Dimensions: 4.00 x 10.10 x 2.00 inches | Weight: 0.35 pounds
Warranty: Lifetime
See On Amazon #20
Wisscool Digital Micron Vacuum Gauge 1/4" SAE, Digital Pressure Tester Meter HVAC, Alarm Notice, Temp Compensation, LCD Display, 6 Units
Asin: B0C4GY3QZW
6 Conversion Units: Pa, Mbar, Mmhg, Mtorr, Inhg, Microns. Units Can Be Converted As Needed..
Package Ncludes A Vacuum Gauge, 3 Aa Batteries, An Extension Connector, And A Portable Tool Bag..
Buzzer Alarm: Alarm Notice Or Vibration Will Be Prompted When The Vacuum Value Hits The Evacuation Target.
Professional High Accuracy Pirani Vacuum Sensor, Accurate And Fast..
Features
- Measurement Range- The measuring range of the vacuum gauge is 99999~0.1Pa(740000~0.75Micron). Accuracy is 5%(at 20 ).
- Professional high accuracy Pirani vacuum sensor, accurate and fast.
- 6 Conversion Units: Pa, mBar, mmHg, mTorr, InHg, Microns. Units can be converted as needed.
- Buzzer Alarm: Alarm notice or vibration will be prompted when the vacuum value hits the evacuation target
- Package ncludes a vacuum gauge, 3 AA batteries, an extension connector, and a portable tool bag.
- See more on Amazon...
Brand: Wisscool | Manufacturer: Wisscool
See On Amazon
Looking For Something Else?
Search